February 2026 - Devel - libvirt List Archives

[PATCH v3 0/5] nwfilter: add nwfilter nftables driver
by Dion Bosschieter 09 Feb '26

09 Feb '26

This series aims to implement nftables as a backend driver for the nwfilter feature. The idea is that eventually it will replace the ebiptables driver and provide an easy way for users to switch from one driver to another. The first 2 patches are moving of functions and renames, meant to decouple nwfilter from the currently only existing ebiptables driver. The 3rd patch introduces the new nwfilter driver. After which nwfilter allows users to choose it in the 4th patch. The last patch introduces unit testing of the new nftables driver. - Implemented very basic nwfilter.conf reading and choosing a nwfilter driver based on the name of the drivers (nftables/ebiptables). Defaults to the nftables driver, based on the firewall_backend_priority meson option, following the bridge driver logic. - Resolves issue https://gitlab.com/libvirt/libvirt/-/issues/603 benchmarks showed that the amount of iifname jumps for each interface with is the cause for this. Switched the nftables driver towards a vmap (verdict map) so we can have 1 rule that jumps to the correct root input/output chain per interface. Which improves throughput as when the number of interface check and jump rules increases the throughput decreases. The issue describes the interface matching works using the interface name and the majority of the effort is the strncpy, this commit also switches nftables to an interface_index compare instead. However, just using the interface_index is not enough, the amount of oif and iif jump rules causes quite a performance issue, the vmap instead solves this. - Split rules into separate tables: "libvirt-nwfilter-ethernet" and "libvirt-nwfilter-other" to preserve existing firewall behavior. - Reworked chain logic for clarity with root -input/-output chains per interface. input in the VM interface is filtered in the -input chain(s), output out of the VM inteface is filtered in the -output chain(s). - Stuck with prerouting and postrouting as hooks for input / output on the -ethernet and -other table. This makes it easier to merge the tables in the future. Saving management of two tables and decreasing the amount of tables a packet sees. Currently ebtables filtering happens via PREROUTING and POSTROUTING hooks, while ip/ip6tables filtering happens in the output/forward hooks. - Stuck with 2 tables for compatibility reasons with eb iptables, unifying into 1 table will break users firewall definitions, which depend on being able to do accepts on ethernet rules (which currently get defined via ebtables) and additional filtering via the ip rules (which currently get defined via ip(6)tables). The nwfilter_nftables_driver keeps splitting the ethernet and non ethernet (other) rules in seperate tables "libvirt-nwfilter-ethernet" and "libvirt-nwfilter-other". - Rewrote chain logic, so it is easier to understand, input in the VM interface is filtered in the -input chain(s), output out of the VM inteface is filtered in the -output chain(s). -ethernet and -other table follow the same style and hook in the same way. - Simplified conntrack handling: rules with accept+conntrack are duplicated to the opposite chain for symmetric behavior, to support the existing ebiptables logic. - Firewall updates continue use tmp names for atomic replacement. Unsupported nwfilter features (for now): - STP filtering - Gratuitous ARP filtering - IPSets (potential future support via nft sets) - Reject due to filtering in pre/postrouting, using drop instead of reject, copying logic from existing ebiptables ebtables actions Future improvements: - Use `nft -f` for atomic rule application. - Optional single-table mode via nwfilter.conf. - Optimize boot phase with chain hash comparison. --- Changes in v3: - Renamed -other to -inet - Renamed - to _ in table names - Updated rule / chain sorting on ethernet table to to copy ebtables logic - Fix possible broken revert path - Fix remove rules not working in some cases, EBUSY - Shared functions camel case commit - Rename config option - Add extra config params, enable_trace, enable_counters This required passing the config struct to the ebip/nft nwfilter drivers - Add extra augeaus files Changes in v2: - Rename {ebip,nf}tables specific test files in 1 directory instead of seperating them in different directories. - Added default nwfilter.conf file in git, documented including augeas files - Replaced hardcoding of default driver based on existing firewall_backend_priority meson option. - Added nwfilter_driver_conf.{h,c} for configuration handling, to match the common pattern used in other drivers. Dion Bosschieter (5): nwfilter: rename generic names to virNWFilter* and CamelCase nwfilter: move shared nwfilter driver functions into nwfilter_tech_driver.c nwfilter: add nwfilter nftables driver nwfilter: allow use of nftables nwfilter driver via nwfilter.conf nwfilter: add unit tests and test data for nwfilter nftables driver libvirt.spec.in | 7 + po/POTFILES | 3 + src/conf/virnwfilterobj.h | 20 - src/nwfilter/libvirtd_nwfilter.aug | 45 + src/nwfilter/meson.build | 39 + src/nwfilter/nwfilter.conf.in | 50 + src/nwfilter/nwfilter_driver.c | 66 +- src/nwfilter/nwfilter_driver_conf.c | 214 + src/nwfilter/nwfilter_driver_conf.h | 69 + src/nwfilter/nwfilter_ebiptables_driver.c | 671 +-- src/nwfilter/nwfilter_ebiptables_driver.h | 2 +- src/nwfilter/nwfilter_gentech_driver.c | 65 +- src/nwfilter/nwfilter_gentech_driver.h | 5 +- src/nwfilter/nwfilter_nftables_driver.c | 2496 ++++++++++++ src/nwfilter/nwfilter_nftables_driver.h | 28 + src/nwfilter/nwfilter_tech_driver.c | 249 ++ src/nwfilter/nwfilter_tech_driver.h | 55 +- src/nwfilter/test_libvirtd_nwfilter.aug.in | 7 + tests/meson.build | 2 + tests/nwfilternftablestest.c | 426 ++ .../ah-ipv6-linux.nftables.args | 304 ++ .../ah-linux.nftables.args | 298 ++ .../all-ipv6-linux.nftables.args | 286 ++ .../all-linux.nftables.args | 280 ++ .../arp-linux.nftables.args | 215 + .../nwfilterxml2firewalldata/arp.nftables.xml | 27 + .../comment-linux.nftables.args | 483 +++ .../conntrack-linux.nftables.args | 198 + .../esp-ipv6-linux.nftables.args | 304 ++ .../esp-linux.nftables.args | 298 ++ .../example-1-linux.nftables.args | 266 ++ .../example-2-linux.nftables.args | 348 ++ .../hex-data-linux.nftables.args | 357 ++ .../icmp-direction-linux.nftables.args | 238 ++ .../icmp-direction2-linux.nftables.args | 238 ++ .../icmp-direction3-linux.nftables.args | 184 + .../icmp-linux.nftables.args | 252 ++ .../icmpv6-linux.nftables.args | 322 ++ .../igmp-linux.nftables.args | 298 ++ .../ip-linux.nftables.args | 198 + .../ipt-no-macspoof-linux.nftables.args | 169 + .../ipv6-linux.nftables.args | 474 +++ .../iter1-linux.nftables.args | 298 ++ .../iter2-linux.nftables.args | 3598 +++++++++++++++++ .../iter3-linux.nftables.args | 418 ++ .../mac-linux.nftables.args | 180 + .../rarp-linux.nftables.args | 215 + .../sctp-ipv6-linux.nftables.args | 314 ++ .../sctp-linux.nftables.args | 314 ++ .../target-linux.nftables.args | 452 +++ .../target2-linux.nftables.args | 316 ++ .../tcp-ipv6-linux.nftables.args | 314 ++ .../tcp-linux.nftables.args | 468 +++ .../udp-ipv6-linux.nftables.args | 314 ++ .../udp-linux.nftables.args | 314 ++ .../udplite-ipv6-linux.nftables.args | 304 ++ .../udplite-linux.nftables.args | 298 ++ .../vlan-linux.nftables.args | 264 ++ tests/nwfilterxml2nftfirewalltest.c | 438 ++ 59 files changed, 18806 insertions(+), 569 deletions(-) create mode 100644 src/nwfilter/libvirtd_nwfilter.aug create mode 100644 src/nwfilter/nwfilter.conf.in create mode 100644 src/nwfilter/nwfilter_driver_conf.c create mode 100644 src/nwfilter/nwfilter_driver_conf.h create mode 100644 src/nwfilter/nwfilter_nftables_driver.c create mode 100644 src/nwfilter/nwfilter_nftables_driver.h create mode 100644 src/nwfilter/nwfilter_tech_driver.c create mode 100644 src/nwfilter/test_libvirtd_nwfilter.aug.in create mode 100644 tests/nwfilternftablestest.c create mode 100755 tests/nwfilterxml2firewalldata/ah-ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/ah-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/all-ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/all-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/arp-linux.nftables.args create mode 100644 tests/nwfilterxml2firewalldata/arp.nftables.xml create mode 100755 tests/nwfilterxml2firewalldata/comment-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/conntrack-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/esp-ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/esp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/example-1-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/example-2-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/hex-data-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/icmp-direction-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/icmp-direction2-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/icmp-direction3-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/icmp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/icmpv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/igmp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/ip-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/ipt-no-macspoof-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/iter1-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/iter2-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/iter3-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/mac-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/rarp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/sctp-ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/sctp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/target-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/target2-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/tcp-ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/tcp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/udp-ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/udp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/udplite-ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/udplite-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/vlan-linux.nftables.args create mode 100644 tests/nwfilterxml2nftfirewalltest.c -- 2.43.0

1 5

[PATCH v2 00/38] qemu: Implement support for uefi-vars device (varstore element)
by Andrea Bolognani 09 Feb '26

09 Feb '26

This series makes it possible to use Secure Boot with aarch64 VMs. https://issues.redhat.com/browse/RHEL-82645 Note that, while I consider the entire series to be ready for review, there are two patches that are marked as DONOTMERGE: that's because they respectively implement support for a JSON firmware descriptor syntax extension that has not yet been approved, and import into the tree firmware descriptor that are not yet part of the Fedora edk2 package. The latter depends on the former, of course, for which patches have been posted[1] to the QEMU mailing list. Changes from [v1]: * rewrite based on review feedback: the <nvram> element is no longer used, and a dedicated <varstore> element is introduced instead; * additional test coverage, as well as fixes and improvements related to firmware selection and its documentation, are present as well. [1] https://mail.gnu.org/archive/html/qemu-devel/2026-02/msg02498.html [v1] https://lists.libvirt.org/archives/list/devel@lists.libvirt.org/thread/TGLF… Andrea Bolognani (38): qemu_firmware: Only set format for custom loader if path is present conf: Move type=rom default for loader to drivers qemu_firmware: Improve matching when loader.type is absent tests: Rename custom JSON firmware descriptors tests: Update JSON firmware descriptor for BIOS schema: Add varstore element conf: Parse and format varstore element conf: Update validation to consider varstore element qemu_capabilities: Introduce QEMU_CAPS_DEVICE_UEFI_VARS qemu: Validate presence of uefi-vars device tests: Add firmware-manual-efi-varstore-q35 tests: Add firmware-manual-efi-varstore-aarch64 tests: Add firmware-auto-efi-varstore-q35 tests: Add firmware-auto-efi-varstore-aarch64 tests: Add firmware-auto-efi-enrolled-keys-aarch64 qemu_firmware: Parse host-uefi-vars firmware feature qemu_firmware: Split sanity check qemu_firmware: Consider host-uefi-vars feature in sanity check DONOTMERGE: qemu_firmware: Support extended syntax for ROM firmware descriptors qemu_firmware: Report NVRAM template path for ROMs schema: Add varstore element for domcaps conf: Include varstore element in domcaps qemu: Fill in varstore element in domcaps qemu_firmware: Use of NVRAM implies stateful firmware qemu_firmware: Allow matching stateful ROMs qemu_firmware: Fill in varstore information qemu: Introduce varstoreDir qemu_firmware: Generate varstore path when necessary DONOTMERGE: tests: Add firmware descriptors for uefi-vars builds qemu_command: Use uefi-vars device where appropriate qemu: Introduce qemuPrepareNVRAMFileCommon() qemu: Create and delete varstore file security: Mark ROMs as read only when using AppArmor security: Handle varstore file include: Mention varstore where applicable virsh: Update for varstore handling docs: Update for varstore and improve news: Document support for uefi-vars device and firmwares NEWS.rst | 16 ++ docs/formatcaps.rst | 2 +- docs/formatdomain.rst | 47 +++-- docs/formatdomaincaps.rst | 81 +++++--- docs/kbase/secureboot.rst | 46 +++-- docs/manpages/virsh.rst | 44 +++-- include/libvirt/libvirt-domain-snapshot.h | 2 +- include/libvirt/libvirt-domain.h | 4 +- libvirt.spec.in | 1 + src/conf/domain_capabilities.c | 10 + src/conf/domain_capabilities.h | 6 + src/conf/domain_conf.c | 79 +++++++- src/conf/domain_conf.h | 9 + src/conf/domain_postparse.c | 19 -- src/conf/domain_validate.c | 82 +++----- src/conf/schemas/domaincaps.rng | 9 + src/conf/schemas/domaincommon.rng | 64 +++--- src/conf/virconftypes.h | 2 + src/libvirt_private.syms | 2 + src/libxl/libxl_domain.c | 6 + src/qemu/meson.build | 1 + src/qemu/qemu_capabilities.c | 31 ++- src/qemu/qemu_capabilities.h | 3 + src/qemu/qemu_command.c | 34 ++++ src/qemu/qemu_conf.c | 4 + src/qemu/qemu_conf.h | 1 + src/qemu/qemu_driver.c | 27 ++- src/qemu/qemu_firmware.c | 182 ++++++++++++++++-- src/qemu/qemu_firmware.h | 1 + src/qemu/qemu_process.c | 84 ++++++-- src/qemu/qemu_validate.c | 20 ++ src/security/security_dac.c | 22 ++- src/security/security_selinux.c | 53 +++-- src/security/virt-aa-helper.c | 36 +++- .../qemu_10.0.0-q35.x86_64+amdsev.xml | 1 + .../domaincapsdata/qemu_10.0.0-q35.x86_64.xml | 1 + .../qemu_10.0.0-tcg.x86_64+amdsev.xml | 1 + .../domaincapsdata/qemu_10.0.0-tcg.x86_64.xml | 1 + .../qemu_10.0.0-virt.aarch64.xml | 1 + tests/domaincapsdata/qemu_10.0.0.aarch64.xml | 1 + tests/domaincapsdata/qemu_10.0.0.ppc64.xml | 1 + tests/domaincapsdata/qemu_10.0.0.s390x.xml | 1 + .../qemu_10.0.0.x86_64+amdsev.xml | 1 + tests/domaincapsdata/qemu_10.0.0.x86_64.xml | 1 + .../qemu_10.1.0-q35.x86_64+inteltdx.xml | 1 + .../domaincapsdata/qemu_10.1.0-q35.x86_64.xml | 1 + .../qemu_10.1.0-tcg.x86_64+inteltdx.xml | 1 + .../domaincapsdata/qemu_10.1.0-tcg.x86_64.xml | 1 + tests/domaincapsdata/qemu_10.1.0.s390x.xml | 1 + .../qemu_10.1.0.x86_64+inteltdx.xml | 1 + tests/domaincapsdata/qemu_10.1.0.x86_64.xml | 1 + .../qemu_10.2.0-q35.x86_64+mshv.xml | 1 + .../domaincapsdata/qemu_10.2.0-q35.x86_64.xml | 1 + .../qemu_10.2.0-tcg.x86_64+mshv.xml | 1 + .../domaincapsdata/qemu_10.2.0-tcg.x86_64.xml | 1 + .../qemu_10.2.0-virt.aarch64.xml | 1 + tests/domaincapsdata/qemu_10.2.0.aarch64.xml | 1 + .../qemu_10.2.0.x86_64+mshv.xml | 1 + tests/domaincapsdata/qemu_10.2.0.x86_64.xml | 1 + .../domaincapsdata/qemu_11.0.0-q35.x86_64.xml | 1 + .../domaincapsdata/qemu_11.0.0-tcg.x86_64.xml | 1 + .../qemu_11.0.0-virt.aarch64.xml | 1 + tests/domaincapsdata/qemu_11.0.0.aarch64.xml | 1 + tests/domaincapsdata/qemu_11.0.0.x86_64.xml | 1 + .../domaincapsdata/qemu_6.2.0-q35.x86_64.xml | 1 + .../domaincapsdata/qemu_6.2.0-tcg.x86_64.xml | 1 + tests/domaincapsdata/qemu_6.2.0.ppc64.xml | 1 + tests/domaincapsdata/qemu_6.2.0.x86_64.xml | 1 + .../domaincapsdata/qemu_7.0.0-q35.x86_64.xml | 1 + .../domaincapsdata/qemu_7.0.0-tcg.x86_64.xml | 1 + tests/domaincapsdata/qemu_7.0.0.ppc64.xml | 1 + tests/domaincapsdata/qemu_7.0.0.x86_64.xml | 1 + .../domaincapsdata/qemu_7.1.0-q35.x86_64.xml | 1 + .../domaincapsdata/qemu_7.1.0-tcg.x86_64.xml | 1 + tests/domaincapsdata/qemu_7.1.0.ppc64.xml | 1 + tests/domaincapsdata/qemu_7.1.0.x86_64.xml | 1 + .../qemu_7.2.0-hvf.x86_64+hvf.xml | 1 + .../domaincapsdata/qemu_7.2.0-q35.x86_64.xml | 1 + .../qemu_7.2.0-tcg.x86_64+hvf.xml | 1 + .../domaincapsdata/qemu_7.2.0-tcg.x86_64.xml | 1 + tests/domaincapsdata/qemu_7.2.0.ppc.xml | 1 + tests/domaincapsdata/qemu_7.2.0.x86_64.xml | 1 + .../domaincapsdata/qemu_8.0.0-q35.x86_64.xml | 1 + .../domaincapsdata/qemu_8.0.0-tcg.x86_64.xml | 1 + tests/domaincapsdata/qemu_8.0.0.x86_64.xml | 1 + .../domaincapsdata/qemu_8.1.0-q35.x86_64.xml | 1 + .../domaincapsdata/qemu_8.1.0-tcg.x86_64.xml | 1 + tests/domaincapsdata/qemu_8.1.0.s390x.xml | 1 + tests/domaincapsdata/qemu_8.1.0.x86_64.xml | 1 + .../domaincapsdata/qemu_8.2.0-q35.x86_64.xml | 1 + .../qemu_8.2.0-tcg-virt.loongarch64.xml | 1 + .../domaincapsdata/qemu_8.2.0-tcg.x86_64.xml | 1 + .../qemu_8.2.0-virt.aarch64.xml | 1 + .../qemu_8.2.0-virt.loongarch64.xml | 1 + tests/domaincapsdata/qemu_8.2.0.aarch64.xml | 1 + tests/domaincapsdata/qemu_8.2.0.armv7l.xml | 1 + tests/domaincapsdata/qemu_8.2.0.s390x.xml | 1 + tests/domaincapsdata/qemu_8.2.0.x86_64.xml | 1 + .../domaincapsdata/qemu_9.0.0-q35.x86_64.xml | 1 + .../domaincapsdata/qemu_9.0.0-tcg.x86_64.xml | 1 + tests/domaincapsdata/qemu_9.0.0.sparc.xml | 1 + tests/domaincapsdata/qemu_9.0.0.x86_64.xml | 1 + .../domaincapsdata/qemu_9.1.0-q35.x86_64.xml | 1 + .../qemu_9.1.0-tcg-virt.riscv64.xml | 1 + .../domaincapsdata/qemu_9.1.0-tcg.x86_64.xml | 1 + .../qemu_9.1.0-virt.riscv64.xml | 1 + tests/domaincapsdata/qemu_9.1.0.s390x.xml | 1 + tests/domaincapsdata/qemu_9.1.0.x86_64.xml | 1 + .../qemu_9.2.0-hvf.aarch64+hvf.xml | 1 + .../qemu_9.2.0-q35.x86_64+amdsev.xml | 1 + .../domaincapsdata/qemu_9.2.0-q35.x86_64.xml | 1 + .../qemu_9.2.0-tcg.x86_64+amdsev.xml | 1 + .../domaincapsdata/qemu_9.2.0-tcg.x86_64.xml | 1 + tests/domaincapsdata/qemu_9.2.0.s390x.xml | 1 + .../qemu_9.2.0.x86_64+amdsev.xml | 1 + tests/domaincapsdata/qemu_9.2.0.x86_64.xml | 1 + .../caps_10.0.0_aarch64.xml | 1 + .../caps_10.0.0_x86_64+amdsev.xml | 1 + .../caps_10.0.0_x86_64.xml | 1 + .../caps_10.1.0_s390x.xml | 1 + .../caps_10.1.0_x86_64+inteltdx.xml | 1 + .../caps_10.1.0_x86_64.xml | 1 + .../caps_10.2.0_aarch64.xml | 1 + .../caps_10.2.0_x86_64+mshv.xml | 1 + .../caps_10.2.0_x86_64.xml | 1 + .../caps_11.0.0_aarch64.xml | 1 + .../caps_11.0.0_x86_64.xml | 1 + .../etc/qemu/firmware/20-bios.json | 1 - .../etc/qemu/firmware/20-libvirt-bios.json | 1 + .../etc/qemu/firmware/59-combined.json | 1 - .../qemu/firmware/59-libvirt-combined.json | 1 + ...{92-masked.json => 92-libvirt-masked.json} | 0 .../{10-bios.json => 10-libvirt-bios.json} | 0 ...0-edk2-ovmf-qemuvars-x64-sb-enrolled.json} | 15 +- .../70-edk2-qemuvars-aarch64-sb-enrolled.json | 28 +++ ...json => 71-edk2-ovmf-qemuvars-x64-sb.json} | 16 +- .../firmware/71-edk2-qemuvars-aarch64-sb.json | 27 +++ ...combined.json => 90-libvirt-combined.json} | 0 .../{91-bios.json => 91-libvirt-bios.json} | 2 +- ...{92-masked.json => 92-libvirt-masked.json} | 0 ...3-invalid.json => 93-libvirt-invalid.json} | 0 tests/qemufirmwaretest.c | 71 ++++--- ...-auto-bios-not-stateless.x86_64-latest.err | 2 +- ...auto-bios-not-stateless.x86_64-latest.xml} | 6 +- ...firmware-auto-bios-nvram.x86_64-latest.err | 2 +- ...are-auto-bios-stateless.x86_64-latest.args | 2 +- ...ware-auto-bios-stateless.x86_64-latest.xml | 2 +- .../firmware-auto-bios.x86_64-latest.args | 2 +- .../firmware-auto-bios.x86_64-latest.xml | 2 +- ...fi-enrolled-keys-aarch64.aarch64-8.2.0.err | 1 + ...enrolled-keys-aarch64.aarch64-latest.args} | 12 +- ...i-enrolled-keys-aarch64.aarch64-latest.xml | 32 +++ ...irmware-auto-efi-enrolled-keys-aarch64.xml | 20 ++ ...-efi-varstore-aarch64.aarch64-latest.args} | 12 +- ...to-efi-varstore-aarch64.aarch64-latest.xml | 32 +++ .../firmware-auto-efi-varstore-aarch64.xml | 18 ++ ...-auto-efi-varstore-q35.x86_64-latest.args} | 5 +- ...e-auto-efi-varstore-q35.x86_64-latest.xml} | 11 +- .../firmware-auto-efi-varstore-q35.xml | 18 ++ ...ual-bios-not-stateless.x86_64-latest.args} | 8 +- ...anual-bios-not-stateless.x86_64-latest.err | 1 - ...nual-bios-not-stateless.x86_64-latest.xml} | 2 +- ...re-manual-bios-stateless.x86_64-latest.xml | 6 +- .../firmware-manual-bios.x86_64-latest.xml | 6 +- ...nual-efi-nvram-stateless.x86_64-latest.err | 2 +- ...nvram-template-stateless.x86_64-latest.err | 2 +- ...ware-manual-efi-rw-nvram.x86_64-latest.err | 2 +- ...ual-efi-varstore-aarch64.aarch64-8.2.0.err | 1 + ...-efi-varstore-aarch64.aarch64-latest.args} | 12 +- ...al-efi-varstore-aarch64.aarch64-latest.xml | 32 +++ .../firmware-manual-efi-varstore-aarch64.xml | 19 ++ ...e-manual-efi-varstore-q35.x86_64-8.2.0.err | 1 + ...anual-efi-varstore-q35.x86_64-latest.args} | 5 +- ...manual-efi-varstore-q35.x86_64-latest.xml} | 11 +- .../firmware-manual-efi-varstore-q35.xml | 19 ++ tests/qemuxmlconftest.c | 16 +- tests/testutilsqemu.c | 2 + tools/virsh-domain.c | 55 ++++-- tools/virsh-snapshot.c | 9 +- 179 files changed, 1296 insertions(+), 380 deletions(-) delete mode 120000 tests/qemufirmwaredata/etc/qemu/firmware/20-bios.json create mode 120000 tests/qemufirmwaredata/etc/qemu/firmware/20-libvirt-bios.json delete mode 120000 tests/qemufirmwaredata/etc/qemu/firmware/59-combined.json create mode 120000 tests/qemufirmwaredata/etc/qemu/firmware/59-libvirt-combined.json rename tests/qemufirmwaredata/etc/qemu/firmware/{92-masked.json => 92-libvirt-masked.json} (100%) rename tests/qemufirmwaredata/home/user/.config/qemu/firmware/{10-bios.json => 10-libvirt-bios.json} (100%) copy tests/qemufirmwaredata/usr/share/qemu/firmware/{90-combined.json => 70-edk2-ovmf-qemuvars-x64-sb-enrolled.json} (55%) create mode 100644 tests/qemufirmwaredata/usr/share/qemu/firmware/70-edk2-qemuvars-aarch64-sb-enrolled.json copy tests/qemufirmwaredata/usr/share/qemu/firmware/{90-combined.json => 71-edk2-ovmf-qemuvars-x64-sb.json} (51%) create mode 100644 tests/qemufirmwaredata/usr/share/qemu/firmware/71-edk2-qemuvars-aarch64-sb.json rename tests/qemufirmwaredata/usr/share/qemu/firmware/{90-combined.json => 90-libvirt-combined.json} (100%) rename tests/qemufirmwaredata/usr/share/qemu/firmware/{91-bios.json => 91-libvirt-bios.json} (90%) rename tests/qemufirmwaredata/usr/share/qemu/firmware/{92-masked.json => 92-libvirt-masked.json} (100%) rename tests/qemufirmwaredata/usr/share/qemu/firmware/{93-invalid.json => 93-libvirt-invalid.json} (100%) copy tests/qemuxmlconfdata/{firmware-auto-bios.x86_64-latest.xml => firmware-auto-bios-not-stateless.x86_64-latest.xml} (84%) create mode 100644 tests/qemuxmlconfdata/firmware-auto-efi-enrolled-keys-aarch64.aarch64-8.2.0.err copy tests/qemuxmlconfdata/{firmware-auto-bios.x86_64-latest.args => firmware-auto-efi-enrolled-keys-aarch64.aarch64-latest.args} (72%) create mode 100644 tests/qemuxmlconfdata/firmware-auto-efi-enrolled-keys-aarch64.aarch64-latest.xml create mode 100644 tests/qemuxmlconfdata/firmware-auto-efi-enrolled-keys-aarch64.xml copy tests/qemuxmlconfdata/{firmware-auto-bios.x86_64-latest.args => firmware-auto-efi-varstore-aarch64.aarch64-latest.args} (72%) create mode 100644 tests/qemuxmlconfdata/firmware-auto-efi-varstore-aarch64.aarch64-latest.xml create mode 100644 tests/qemuxmlconfdata/firmware-auto-efi-varstore-aarch64.xml copy tests/qemuxmlconfdata/{firmware-auto-bios-stateless.x86_64-latest.args => firmware-auto-efi-varstore-q35.x86_64-latest.args} (83%) copy tests/qemuxmlconfdata/{firmware-auto-bios-stateless.x86_64-latest.xml => firmware-auto-efi-varstore-q35.x86_64-latest.xml} (73%) create mode 100644 tests/qemuxmlconfdata/firmware-auto-efi-varstore-q35.xml copy tests/qemuxmlconfdata/{firmware-auto-bios.x86_64-latest.args => firmware-manual-bios-not-stateless.x86_64-latest.args} (84%) delete mode 100644 tests/qemuxmlconfdata/firmware-manual-bios-not-stateless.x86_64-latest.err copy tests/qemuxmlconfdata/{firmware-manual-bios.x86_64-latest.xml => firmware-manual-bios-not-stateless.x86_64-latest.xml} (90%) create mode 100644 tests/qemuxmlconfdata/firmware-manual-efi-varstore-aarch64.aarch64-8.2.0.err copy tests/qemuxmlconfdata/{firmware-auto-bios.x86_64-latest.args => firmware-manual-efi-varstore-aarch64.aarch64-latest.args} (73%) create mode 100644 tests/qemuxmlconfdata/firmware-manual-efi-varstore-aarch64.aarch64-latest.xml create mode 100644 tests/qemuxmlconfdata/firmware-manual-efi-varstore-aarch64.xml create mode 100644 tests/qemuxmlconfdata/firmware-manual-efi-varstore-q35.x86_64-8.2.0.err copy tests/qemuxmlconfdata/{firmware-auto-bios.x86_64-latest.args => firmware-manual-efi-varstore-q35.x86_64-latest.args} (85%) copy tests/qemuxmlconfdata/{firmware-auto-bios-stateless.x86_64-latest.xml => firmware-manual-efi-varstore-q35.x86_64-latest.xml} (74%) create mode 100644 tests/qemuxmlconfdata/firmware-manual-efi-varstore-q35.xml -- 2.53.0

1 38

[PATCH] virsh: Switch cmdDomIfAddr() to vshTable
by Michal Privoznik 09 Feb '26

09 Feb '26

From: Michal Privoznik <mprivozn(a)redhat.com> The aim of cmdDomIfAddr() is to obtain IP addresses for given domain and then print (ifName, MAC, type, IP Address) tuple. Preferably in an aligned table. This is hard to do with printf style of spacing ("%-NNs") since the interface name (ifName) can vary a lot in length. Fortunately, we have vshTable which is designed to handle this case. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- tools/virsh-domain-monitor.c | 53 ++++++++++++++++++++---------------- 1 file changed, 30 insertions(+), 23 deletions(-) diff --git a/tools/virsh-domain-monitor.c b/tools/virsh-domain-monitor.c index f4274f2721..c0db30cb11 100644 --- a/tools/virsh-domain-monitor.c +++ b/tools/virsh-domain-monitor.c @@ -2279,6 +2279,7 @@ cmdDomIfAddr(vshControl *ctl, const vshCmd *cmd) bool full = vshCommandOptBool(cmd, "full"); const char *sourcestr = NULL; int source = VIR_DOMAIN_INTERFACE_ADDRESSES_SRC_LEASE; + g_autoptr(vshTable) table = NULL; if (vshCommandOptString(ctl, cmd, "interface", &ifacestr) < 0) return false; @@ -2299,28 +2300,30 @@ cmdDomIfAddr(vshControl *ctl, const vshCmd *cmd) goto cleanup; } - vshPrintExtra(ctl, " %-10s %-20s %-8s %s\n%s%s\n", _("Name"), - _("MAC address"), _("Protocol"), _("Address"), - _("-------------------------------------------------"), - _("------------------------------")); + table = vshTableNew(_("Name"), _("MAC address"), _("Protocol"), _("Address"), NULL); + if (!table) + return false; for (i = 0; i < ifaces_count; i++) { virDomainInterfacePtr iface = ifaces[i]; const char *type = NULL; + const char *hwaddr = "N/A"; if (ifacestr && STRNEQ(ifacestr, iface->name)) continue; + if (iface->hwaddr) + hwaddr = iface->hwaddr; + /* When the interface has no IP address */ if (!iface->naddrs) { - vshPrint(ctl, " %-10s %-17s %-12s %s\n", - iface->name, - iface->hwaddr ? iface->hwaddr : "N/A", "N/A", "N/A"); + if (vshTableRowAppend(table, + iface->name, hwaddr, "N/A", "N/A", NULL) < 0) + goto cleanup; continue; } for (j = 0; j < iface->naddrs; j++) { - g_auto(virBuffer) buf = VIR_BUFFER_INITIALIZER; g_autofree char *ip_addr_str = NULL; switch (iface->addrs[j].type) { @@ -2332,26 +2335,30 @@ cmdDomIfAddr(vshControl *ctl, const vshCmd *cmd) break; } - virBufferAsprintf(&buf, "%-12s %s/%d", - type, iface->addrs[j].addr, - iface->addrs[j].prefix); - - ip_addr_str = virBufferContentAndReset(&buf); - - if (!ip_addr_str) - ip_addr_str = g_strdup(""); + ip_addr_str = g_strdup_printf("%s/%d", + iface->addrs[j].addr, + iface->addrs[j].prefix); /* Don't repeat interface name */ - if (full || !j) - vshPrint(ctl, " %-10s %-17s %s\n", - iface->name, - NULLSTR_EMPTY(iface->hwaddr), ip_addr_str); - else - vshPrint(ctl, " %-10s %-17s %s\n", - "-", "-", ip_addr_str); + if (full || !j) { + if (vshTableRowAppend(table, + iface->name, + NULLSTR_EMPTY(iface->hwaddr), + NULLSTR_MINUS(type), ip_addr_str, NULL) < 0) { + goto cleanup; + } + } else { + if (vshTableRowAppend(table, + "-", "-", + NULLSTR_MINUS(type), ip_addr_str, NULL) < 0) { + goto cleanup; + } + } } } + vshTablePrintToStdout(table, ctl); + ret = true; cleanup: -- 2.52.0

2 1

[PATCH] qapi/net: deprecate TAP fd and vhostfd options
by Vladimir Sementsov-Ogievskiy 08 Feb '26

08 Feb '26

They are the same as fds and vhostfds, except they accept only one fd. Let's deprecate redundant options. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov(a)yandex-team.ru> --- Hi all! after "[PATCH v2 00/12] net: refactoring and fixes" options fd and vhostfd becomes redundant, fds and vhostfds may be used instead. this patch also based on "[PATCH v6] qapi: net: deprecate vhostforce option", that's why it's sent separately. Based-on: <20260129213215.1405459-1-vsementsov(a)yandex-team.ru> Based-on: <20251113071711.349651-1-vsementsov(a)yandex-team.ru> docs/about/deprecated.rst | 6 ++++++ qapi/net.json | 9 +++++---- 2 files changed, 11 insertions(+), 4 deletions(-) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index e8ff478583..9010f8ab07 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -451,6 +451,12 @@ TAP ``vhostforce`` (since 11.0) The ``vhostforce`` option is redundant with the ``vhost`` option. If they conflict, ``vhost`` takes precedence. Just use ``vhost``. +TAP ``fd`` and ``vhostfd`` (since 11.0) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Use ``fds`` and ``vhostfds`` correspondingly, each set with one fd +instead of ``fd`` and ``vhsotfd``. + Vhost-user ``vhostforce`` (since 11.0) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/qapi/net.json b/qapi/net.json index 9a00d578e9..2d5aed3ef8 100644 --- a/qapi/net.json +++ b/qapi/net.json @@ -326,8 +326,7 @@ # # @fd: file descriptor of an already opened tap # -# @fds: multiple file descriptors of already opened multiqueue capable -# tap +# @fds: multiple file descriptors of already opened tap # # @script: script to initialize the interface # @@ -359,13 +358,15 @@ # Features: # # @deprecated: Member @vhostforce is deprecated. Use @vhost instead. +# Member @fd is deprecated. Use @fds instead. +# Member @vhostfd is deprecated. Use @vhostfds instead. # # Since: 1.2 ## { 'struct': 'NetdevTapOptions', 'data': { '*ifname': 'str', - '*fd': 'str', + '*fd': { 'type': 'str', 'features': [ 'deprecated' ] }, '*fds': 'str', '*script': 'str', '*downscript': 'str', @@ -374,7 +375,7 @@ '*sndbuf': 'size', '*vnet_hdr': 'bool', '*vhost': 'bool', - '*vhostfd': 'str', + '*vhostfd': { 'type': 'str', 'features': [ 'deprecated' ] }, '*vhostfds': 'str', '*vhostforce': { 'type': 'bool', 'features': [ 'deprecated' ] }, '*queues': 'uint32', -- 2.52.0

3 6

[PATCH v2 0/2] Adding support for client-based FD migrations.
by Tejus GK 08 Feb '26

08 Feb '26

Libvirt supports FD-based live migrations in the form of tunnelled migrations. However, this isn't as performant as of now, since it involves extra copies.· This patchset proposes adding support for externally provided file descriptors for live migration. By allowing the client to supply the migration FD directly, the extra copy can be avoided, improving overall migration performance. The intent is to gather early feedback on the approach and its feasibility. Comments, concerns, and suggestions are very welcome :) V2: 1. Removed the approach of introducing a new FD passing API and instead reuse the virDomainFDAssociate API along with a dummy VM on the destination host. 2. Introduced a new virDomainMigrate parameter, VIR_MIGRATE_PARAM_FD_SET. Tejus GK (2): qemu: support incoming "fd" uri qemu: add support for fd based live migrations include/libvirt/libvirt-domain.h | 14 +++ src/qemu/qemu_driver.c | 24 +++-- src/qemu/qemu_migration.c | 174 +++++++++++++++++++++++++------ src/qemu/qemu_migration.h | 3 + 4 files changed, 178 insertions(+), 37 deletions(-) -- 2.43.7

1 3

[PATCH v6 00/27] hw/i386/pc: Remove deprecated 2.6 and 2.7 PC machines
by Zhao Liu 07 Feb '26

07 Feb '26

Hi, This v6 is based on the master branch at the commit 0fc482b73d8e ("Merge tag 'pull-aspeed-20260105' of https://github.com/legoater/qemu into staging"). Since there's the discussion around fw_cfg_init_io_nodma() [*], v6 doesn't include that cleanups. Therefore, comparing v5, v6 has *very* minimal changes and most of patches have been reviewed (except patch 15 - I think it needs an additianl review :-) ). Thanks for your patience and review! Introduction ============ A brief introduction from Philippe's v4: The versioned 'pc' and 'q35' machines up to 2.12 been marked as deprecated three releases ago, and are older than 6 years, so according to our support policy we can remove them. This series only includes the 2.6 and 2.7 machines removal, as it is a big enough number of LoC removed. Rest will follow. Change Log ========== (Main) changes since v5: * Merge pc & q35 changes for testing DSDT tables into one patch and simplify the commit message. * Reorganize S-o-b and collect review tags from Igor. (Main) changes since v4: * Completely remove the legacy CPU hotplug approach. - New patch 2-8. - Test CPU hot-plug & hot-unplug via qmp. * Keep "dma_enabled" property in fw_cfg_io_properties[] since Sun4u & Sun4v are still using it. - About more details, please see commit message of patch 15. * Temporarily keep these properties: "cpuid-0xb" (of X86CPU), "fill-mtrr-mask" (of X86CPU), "version" (of IOAPICCommonState). - These properties will be deprecated first before removal, in another series. * Keep "l3-cache" (of X86CPU) and "page-per-vq" (of VirtIOPCIProxy), since they are still in use (e.g., libvirt). Reference ========= [*]: https://lore.kernel.org/qemu-devel/20251203060942.57851-1-philmd@linaro.org/ Best Regards, Zhao --- Igor Mammedov (1): tests/acpi: Allow DSDT table change for x86 machines Philippe Mathieu-Daudé (22): hw/i386/pc: Remove deprecated pc-q35-2.6 and pc-i440fx-2.6 machines hw/i386/pc: Remove PCMachineClass::legacy_cpu_hotplug field hw/nvram/fw_cfg: Rename fw_cfg_init_mem() with '_nodma' suffix hw/mips/loongson3_virt: Prefer using fw_cfg_init_mem_nodma() hw/nvram/fw_cfg: Factor fw_cfg_init_mem_internal() out hw/nvram/fw_cfg: Rename fw_cfg_init_mem_wide() -> fw_cfg_init_mem_dma() hw/i386/x86: Remove X86MachineClass::fwcfg_dma_enabled field hw/i386/pc: Remove multiboot.bin hw/i386: Assume fw_cfg DMA is always enabled hw/i386: Remove linuxboot.bin hw/i386/pc: Remove pc_compat_2_6[] array hw/intc/apic: Remove APICCommonState::legacy_instance_id field hw/core/machine: Remove hw_compat_2_6[] array hw/virtio/virtio-mmio: Remove VirtIOMMIOProxy::format_transport_address field hw/i386/pc: Remove deprecated pc-q35-2.7 and pc-i440fx-2.7 machines hw/i386/pc: Remove pc_compat_2_7[] array target/i386/cpu: Remove CPUX86State::full_cpuid_auto_level field hw/audio/pcspk: Remove PCSpkState::migrate field hw/core/machine: Remove hw_compat_2_7[] array hw/i386/intel_iommu: Remove IntelIOMMUState::buggy_eim field hw/virtio/virtio-pci: Remove VirtIOPCIProxy::ignore_backend_features field hw/char/virtio-serial: Do not expose the 'emergency-write' property Zhao Liu (4): pc: Start with modern CPU hotplug interface by default acpi: Remove legacy cpu hotplug utilities docs/specs/acpi_cpu_hotplug: Remove legacy cpu hotplug descriptions tests/acpi: Update DSDT tables for pc & q35 machines docs/specs/acpi_cpu_hotplug.rst | 28 +- hw/acpi/acpi-cpu-hotplug-stub.c | 19 +- hw/acpi/cpu.c | 10 - hw/acpi/cpu_hotplug.c | 348 ------------------ hw/acpi/generic_event_device.c | 1 + hw/acpi/ich9.c | 61 +-- hw/acpi/meson.build | 2 +- hw/acpi/piix4.c | 61 +-- hw/arm/virt.c | 2 +- hw/audio/pcspk.c | 10 - hw/char/virtio-serial-bus.c | 9 +- hw/core/machine.c | 17 - hw/hppa/machine.c | 2 +- hw/i386/acpi-build.c | 7 +- hw/i386/fw_cfg.c | 16 +- hw/i386/intel_iommu.c | 5 +- hw/i386/microvm.c | 3 - hw/i386/multiboot.c | 7 +- hw/i386/pc.c | 25 +- hw/i386/pc_piix.c | 23 -- hw/i386/pc_q35.c | 24 -- hw/i386/x86-common.c | 8 +- hw/i386/x86.c | 2 - hw/intc/apic_common.c | 5 - hw/loongarch/fw_cfg.c | 4 +- hw/loongarch/virt-acpi-build.c | 1 - hw/mips/loongson3_virt.c | 2 +- hw/nvram/fw_cfg.c | 22 +- hw/riscv/virt.c | 4 +- hw/virtio/virtio-mmio.c | 15 - hw/virtio/virtio-pci.c | 5 +- include/hw/acpi/cpu.h | 1 - include/hw/acpi/ich9.h | 4 +- include/hw/acpi/piix4.h | 4 +- include/hw/core/boards.h | 6 - include/hw/i386/apic_internal.h | 1 - include/hw/i386/intel_iommu.h | 1 - include/hw/i386/pc.h | 9 - include/hw/i386/x86.h | 2 - include/hw/nvram/fw_cfg.h | 9 +- include/hw/virtio/virtio-mmio.h | 1 - include/hw/virtio/virtio-pci.h | 1 - include/hw/virtio/virtio-serial.h | 2 - pc-bios/meson.build | 2 - pc-bios/multiboot.bin | Bin 1024 -> 0 bytes pc-bios/optionrom/Makefile | 2 +- pc-bios/optionrom/linuxboot.S | 195 ---------- pc-bios/optionrom/multiboot.S | 232 ------------ pc-bios/optionrom/multiboot_dma.S | 234 +++++++++++- pc-bios/optionrom/optionrom.h | 4 - target/i386/cpu.c | 119 +++--- target/i386/cpu.h | 3 - tests/data/acpi/x86/pc/DSDT | Bin 8611 -> 8598 bytes tests/data/acpi/x86/pc/DSDT.acpierst | Bin 8522 -> 8509 bytes tests/data/acpi/x86/pc/DSDT.acpihmat | Bin 9936 -> 9923 bytes tests/data/acpi/x86/pc/DSDT.bridge | Bin 15482 -> 15469 bytes tests/data/acpi/x86/pc/DSDT.cphp | Bin 9075 -> 9062 bytes tests/data/acpi/x86/pc/DSDT.dimmpxm | Bin 10265 -> 10252 bytes tests/data/acpi/x86/pc/DSDT.hpbridge | Bin 8562 -> 8549 bytes tests/data/acpi/x86/pc/DSDT.hpbrroot | Bin 5100 -> 5087 bytes tests/data/acpi/x86/pc/DSDT.ipmikcs | Bin 8683 -> 8670 bytes tests/data/acpi/x86/pc/DSDT.memhp | Bin 9970 -> 9957 bytes tests/data/acpi/x86/pc/DSDT.nohpet | Bin 8469 -> 8456 bytes tests/data/acpi/x86/pc/DSDT.numamem | Bin 8617 -> 8604 bytes tests/data/acpi/x86/pc/DSDT.roothp | Bin 12404 -> 12391 bytes tests/data/acpi/x86/q35/DSDT | Bin 8440 -> 8427 bytes tests/data/acpi/x86/q35/DSDT.acpierst | Bin 8457 -> 8444 bytes tests/data/acpi/x86/q35/DSDT.acpihmat | Bin 9765 -> 9752 bytes .../data/acpi/x86/q35/DSDT.acpihmat-generic-x | Bin 12650 -> 12637 bytes .../acpi/x86/q35/DSDT.acpihmat-noinitiator | Bin 8719 -> 8706 bytes tests/data/acpi/x86/q35/DSDT.applesmc | Bin 8486 -> 8473 bytes tests/data/acpi/x86/q35/DSDT.bridge | Bin 12053 -> 12040 bytes tests/data/acpi/x86/q35/DSDT.core-count | Bin 12998 -> 12985 bytes tests/data/acpi/x86/q35/DSDT.core-count2 | Bin 33855 -> 33842 bytes tests/data/acpi/x86/q35/DSDT.cphp | Bin 8904 -> 8891 bytes tests/data/acpi/x86/q35/DSDT.cxl | Bin 13231 -> 13218 bytes tests/data/acpi/x86/q35/DSDT.dimmpxm | Bin 10094 -> 10081 bytes tests/data/acpi/x86/q35/DSDT.ipmibt | Bin 8515 -> 8502 bytes tests/data/acpi/x86/q35/DSDT.ipmismbus | Bin 8528 -> 8515 bytes tests/data/acpi/x86/q35/DSDT.ivrs | Bin 8457 -> 8444 bytes tests/data/acpi/x86/q35/DSDT.memhp | Bin 9799 -> 9786 bytes tests/data/acpi/x86/q35/DSDT.mmio64 | Bin 9570 -> 9557 bytes tests/data/acpi/x86/q35/DSDT.multi-bridge | Bin 13293 -> 13280 bytes tests/data/acpi/x86/q35/DSDT.noacpihp | Bin 8302 -> 8289 bytes tests/data/acpi/x86/q35/DSDT.nohpet | Bin 8298 -> 8285 bytes tests/data/acpi/x86/q35/DSDT.numamem | Bin 8446 -> 8433 bytes tests/data/acpi/x86/q35/DSDT.pvpanic-isa | Bin 8541 -> 8528 bytes tests/data/acpi/x86/q35/DSDT.thread-count | Bin 12998 -> 12985 bytes tests/data/acpi/x86/q35/DSDT.thread-count2 | Bin 33855 -> 33842 bytes tests/data/acpi/x86/q35/DSDT.tis.tpm12 | Bin 9046 -> 9033 bytes tests/data/acpi/x86/q35/DSDT.tis.tpm2 | Bin 9072 -> 9059 bytes tests/data/acpi/x86/q35/DSDT.type4-count | Bin 18674 -> 18661 bytes tests/data/acpi/x86/q35/DSDT.viot | Bin 14697 -> 14684 bytes tests/data/acpi/x86/q35/DSDT.xapic | Bin 35803 -> 35790 bytes tests/qtest/test-x86-cpuid-compat.c | 11 - 95 files changed, 363 insertions(+), 1228 deletions(-) delete mode 100644 hw/acpi/cpu_hotplug.c delete mode 100644 pc-bios/multiboot.bin delete mode 100644 pc-bios/optionrom/linuxboot.S delete mode 100644 pc-bios/optionrom/multiboot.S -- 2.34.1

3 30

[PATCH RFC 0/5] qemu: Adjust to deprecation of -netdev tap properties 'fd' and 'vhostfd' - Variant B
by Peter Krempa 06 Feb '26

06 Feb '26

This patchset adapts libvirt to the proposed deprecation of 'fd'/'vhostfd' fields in favor of the plural spellings even for 1 fd. Based on the discussion [1] it seems that it should be possible to replace it unconditionally but I'm not certain about this and also it's outside my usual area of expertise. Thus this version is the more cautious approach of adding a capability and only switching the generator once deprecations are set up. While adding the capability I've also uncovered a bug in the QMP query strings where it was not possible to query features of an object member. [1] https://lists.libvirt.org/archives/list/devel@lists.libvirt.org/message/SM4… Peter Krempa (5): virQEMUQAPISchemaTraverseObject: Consider features also on current members qemu: capabilities: Introduce QEMU_CAPS_NETDEV_TAP_FD_VHOSTFD_PLURAL qemuxmlconftest: Add version-locked test cases for the use of -netdev tap with fd/vhostfd qemuBuildHostNetProps: Use 'fds', 'vhostfds' with QEMU_CAPS_NETDEV_TAP_FD_VHOSTFD_PLURAL [DO_NOT_PUSH] qemucapabilitiesdata: Update with patches removing 'fd' and 'vhostfd' src/qemu/qemu_capabilities.c | 8 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 11 +- src/qemu/qemu_command.h | 3 +- src/qemu/qemu_hotplug.c | 2 +- src/qemu/qemu_qapi.c | 26 + .../caps_11.0.0_x86_64.replies | 3571 ++++++++--------- .../caps_11.0.0_x86_64.xml | 11 +- .../downscript.x86_64-latest.args | 2 +- .../graphics-spice-timeout.x86_64-latest.args | 2 +- .../net-bandwidth.x86_64-latest.args | 2 +- .../net-bandwidth2.x86_64-latest.args | 2 +- .../net-coalesce.x86_64-latest.args | 6 +- .../net-eth-hostip.x86_64-latest.args | 2 +- .../net-eth-ifname.x86_64-latest.args | 2 +- .../net-eth-names.x86_64-latest.args | 4 +- .../net-eth-unmanaged-tap.x86_64-latest.args | 2 +- .../net-eth.x86_64-10.2.0.args | 36 + .../qemuxmlconfdata/net-eth.x86_64-10.2.0.xml | 44 + .../net-eth.x86_64-latest.args | 2 +- .../net-isolated-port.x86_64-latest.args | 2 +- .../net-midonet.x86_64-latest.args | 2 +- .../net-mtu.x86_64-latest.args | 4 +- .../net-openvswitch.x86_64-latest.args | 2 +- ...irtio-network-portgroup.x86_64-latest.args | 6 +- ...-virtio-teaming-network.x86_64-latest.args | 2 +- .../net-virtio-vhost.x86_64-10.2.0.args | 42 + .../net-virtio-vhost.x86_64-10.2.0.xml | 65 + .../net-virtio-vhost.x86_64-latest.args | 2 +- .../tap-vhost-incorrect.x86_64-latest.args | 4 +- .../user-aliases.x86_64-latest.args | 2 +- tests/qemuxmlconftest.c | 4 + 32 files changed, 2048 insertions(+), 1828 deletions(-) create mode 100644 tests/qemuxmlconfdata/net-eth.x86_64-10.2.0.args create mode 100644 tests/qemuxmlconfdata/net-eth.x86_64-10.2.0.xml create mode 100644 tests/qemuxmlconfdata/net-virtio-vhost.x86_64-10.2.0.args create mode 100644 tests/qemuxmlconfdata/net-virtio-vhost.x86_64-10.2.0.xml -- 2.53.0

1 5

[PATCH RFC 0/5] qemu: Adjust to deprecation of -netdev tap properties 'fd' and 'vhostfd' - Variant A
by Peter Krempa 06 Feb '26

06 Feb '26

This patchset adapts libvirt to the proposed deprecation of 'fd'/'vhostfd' fields in favor of the plural spellings even for 1 fd. Based on the discussion [1] it seems that it should be possible to replace it unconditionally but I'm not certain about this and also it's outside my usual area of expertise. This is the optimistic approach should it be possible for us to unconditionally use the plural variands. Reordering the patches shows that the proposal causes test suite failures in our code. [1] https://lists.libvirt.org/archives/list/devel@lists.libvirt.org/message/SM4… Peter Krempa (2): qemuBuildHostNetProps: Use only plural form of 'fds' and 'vhostfds' properties [DO_NOT_PUSH] qemucapabilitiesdata: Update with patches removing 'fd' and 'vhostfd' src/qemu/qemu_command.c | 24 +- .../caps_11.0.0_x86_64.replies | 3571 ++++++++--------- .../caps_11.0.0_x86_64.xml | 10 +- .../downscript.x86_64-latest.args | 2 +- .../graphics-spice-timeout.x86_64-latest.args | 2 +- .../net-bandwidth.x86_64-latest.args | 2 +- .../net-bandwidth2.x86_64-latest.args | 2 +- .../net-coalesce.x86_64-latest.args | 6 +- .../net-eth-hostip.x86_64-latest.args | 2 +- .../net-eth-ifname.x86_64-latest.args | 2 +- .../net-eth-names.x86_64-latest.args | 4 +- .../net-eth-unmanaged-tap.x86_64-latest.args | 2 +- .../net-eth.x86_64-latest.args | 2 +- .../net-isolated-port.x86_64-latest.args | 2 +- .../net-midonet.x86_64-latest.args | 2 +- .../net-mtu.x86_64-latest.args | 4 +- .../net-openvswitch.x86_64-latest.args | 2 +- ...irtio-network-portgroup.x86_64-latest.args | 6 +- ...-virtio-teaming-network.x86_64-latest.args | 2 +- .../net-virtio-vhost.x86_64-latest.args | 2 +- .../tap-vhost-incorrect.x86_64-latest.args | 4 +- .../user-aliases.x86_64-latest.args | 2 +- 22 files changed, 1815 insertions(+), 1842 deletions(-) -- 2.53.0

1 2

[PATCH v2 0/2] target/arm: Deprecate '-cpu any'
by Philippe Mathieu-Daudé 06 Feb '26

06 Feb '26

Arm '-cpu any' is aliased to '-cpu max' since more than 5 years. Deprecate the former in preparation of removal. v2: s/any/max/ in target/arm/cpu.c comment Philippe Mathieu-Daudé (2): target/arm: Remove dead code target/arm: Deprecate '-cpu any' (remplaced by '-cpu max') docs/about/deprecated.rst | 8 ++++++++ target/arm/cpu.h | 2 +- target/arm/cpu.c | 1 + target/arm/tcg/cpu32.c | 3 --- 4 files changed, 10 insertions(+), 4 deletions(-) -- 2.52.0

3 7

[PATCH] hyperv: Avoid memleak in hypervDomainDefParsePhysicalDisk
by Michal Privoznik 06 Feb '26

06 Feb '26

From: Michal Privoznik <mprivozn(a)redhat.com> When parsing a physical disk, the @hostResouce is escaped once with the retval being stored into @hostEscaped. Then, it's escaped again, but the retval is stored into the very same variable, leading to a leak where intermediate value is lost. 256 bytes in 1 blocks are definitely lost in loss record 469 of 483 at 0x49543A0: realloc (vg_replace_malloc.c:1804) by 0x516C251: g_realloc (in /usr/lib64/libglib-2.0.so.0.8400.4) by 0x518BB7E: g_string_expand (in /usr/lib64/libglib-2.0.so.0.8400.4) by 0x518BFF9: g_string_insert_len (in /usr/lib64/libglib-2.0.so.0.8400.4) by 0x4A58B5F: g_string_append_len_inline (gstring.h:247) by 0x4A58B5F: virBufferAdd (virbuffer.c:164) by 0x4AFDA71: virStringReplace (virstring.c:708) by 0x4DA4381: hypervDomainDefParsePhysicalDisk (hyperv_driver.c:1375) by 0x4DA4A18: hypervDomainDefParseStorage (hyperv_driver.c:1487) by 0x4DA9E31: hypervDomainGetXMLDesc (hyperv_driver.c:2761) by 0x4DFB3E5: virDomainGetXMLDesc (libvirt-domain.c:2898) by 0x406D39B: cmdDumpXML (virsh-domain.c:10787) by 0x40B13B1: vshCommandRun (vsh.c:1383) Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- src/hyperv/hyperv_driver.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/src/hyperv/hyperv_driver.c b/src/hyperv/hyperv_driver.c index 8dd56f39dc..203bbeb8a5 100644 --- a/src/hyperv/hyperv_driver.c +++ b/src/hyperv/hyperv_driver.c @@ -1351,6 +1351,7 @@ hypervDomainDefParsePhysicalDisk(hypervPrivate *priv, virDomainDiskDef *disk = NULL; char **hostResource = entry->data->HostResource.data; g_autofree char *hostEscaped = NULL; + g_autofree char *hostEscapedTwice = NULL; g_autofree char *driveNumberStr = NULL; g_auto(virBuffer) query = VIR_BUFFER_INITIALIZER; int addr = -1, ctrlr_idx = -1; @@ -1373,12 +1374,12 @@ hypervDomainDefParsePhysicalDisk(hypervPrivate *priv, /* Query Msvm_DiskDrive for the DriveNumber */ hostEscaped = virStringReplace(*hostResource, "\\\"", "\""); - hostEscaped = virStringReplace(hostEscaped, "\\", "\\\\"); + hostEscapedTwice = virStringReplace(hostEscaped, "\\", "\\\\"); /* quotes must be preserved, so virBufferEscapeSQL can't be used */ virBufferAsprintf(&query, MSVM_DISKDRIVE_WQL_SELECT "WHERE __PATH='%s'", - hostEscaped); + hostEscapedTwice); if (hypervGetWmiClass(Msvm_DiskDrive, &diskdrive) < 0) goto cleanup; -- 2.52.0

2 1