September 2020 - Devel - Libvirt List Archives

[PATCH] rpm: Fix conditional for defining %_vpath_builddir for RHEL <= 7

by Neal Gompa

The conditional was incorrectly overriding %_vpath_builddir when %rhel is not defined, which led to surprising behavior when the global %_vpath_builddir path is set on Fedora already. Signed-off-by: Neal Gompa <ngompa13(a)gmail.com> --- libvirt.spec.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/libvirt.spec.in b/libvirt.spec.in index bb74443484..4b9e04ae61 100644 --- a/libvirt.spec.in +++ b/libvirt.spec.in @@ -32,7 +32,7 @@ %endif # On RHEL 7 and older macro _vpath_builddir is not defined. -%if 0%{?rhel} <= 7 +%if 0%{?rhel} && 0%{?rhel} <= 7 %define _vpath_builddir %{_target_platform} %endif -- 2.26.2

4 years, 3 months

2
2
0 / 0

[PATCH v2] qemu_validate: Only allow none address for watchdog ib700

by Han Han

Since QEMU 1.5.3, the ib700 watchdog device has no options for address, and not address in device tree: $ /usr/libexec/qemu-kvm -version QEMU emulator version 1.5.3 (qemu-kvm-1.5.3-175.el7), Copyright (c) 2003-2008 Fabrice Bellard $ /usr/libexec/qemu-kvm -device ib700,\? $ virsh qemu-monitor-command seabios --hmp info qtree|grep ib700 -A 2 dev: ib700, id "watchdog0" dev: isa-serial, id "serial0" index = 0 So only allow it to use none address. Fixes: 8a54cc1d08a333283c9cfc3fd7788be2642ca71a Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509908 Signed-off-by: Han Han <hhan(a)redhat.com> --- src/qemu/qemu_validate.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/src/qemu/qemu_validate.c b/src/qemu/qemu_validate.c index 488f258d00..402f81a3cd 100644 --- a/src/qemu/qemu_validate.c +++ b/src/qemu/qemu_validate.c @@ -1637,10 +1637,9 @@ qemuValidateDomainWatchdogDef(const virDomainWatchdogDef *dev, break; case VIR_DOMAIN_WATCHDOG_MODEL_IB700: - if (dev->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE && - dev->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_ISA) { + if (dev->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("%s model of watchdog can go only on ISA bus"), + _("%s model of watchdog does not support configuring the address"), virDomainWatchdogModelTypeToString(dev->model)); return -1; } -- 2.28.0

4 years, 3 months

3
2
0 / 0

[PATCH v2] qemu: Do not silently allow non-available timers on non-x86 systems

by Thomas Huth

libvirt currently silently allows <timer name="kvmclock"/> and some other timer tags in the guest XML definition for timers that do not exist on non-x86 systems. We should not silently ignore these tags since the users might not get what they expected otherwise. Note: The error is only generated if the timer is marked with present="yes" - otherwise we would suddenly refuse XML definitions that worked without problems before. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1754887 Signed-off-by: Thomas Huth <thuth(a)redhat.com> --- v2: Check also for timer->present == 1 src/qemu/qemu_validate.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/src/qemu/qemu_validate.c b/src/qemu/qemu_validate.c index 488f258d00..561e7b12c7 100644 --- a/src/qemu/qemu_validate.c +++ b/src/qemu/qemu_validate.c @@ -371,6 +371,18 @@ qemuValidateDomainDefClockTimers(const virDomainDef *def, case VIR_DOMAIN_TIMER_NAME_TSC: case VIR_DOMAIN_TIMER_NAME_KVMCLOCK: case VIR_DOMAIN_TIMER_NAME_HYPERVCLOCK: + if (!ARCH_IS_X86(def->os.arch) && timer->present == 1) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("Configuring the '%s' timer is not supported " + "for virtType=%s arch=%s machine=%s guests"), + virDomainTimerNameTypeToString(timer->name), + virDomainVirtTypeToString(def->virtType), + virArchToString(def->os.arch), + def->os.machine); + return -1; + } + break; + case VIR_DOMAIN_TIMER_NAME_LAST: break; -- 2.18.1

4 years, 3 months

5
5
0 / 0

[PATCH] qemu_driver.c: Fix domfsinfo for non-PCI device information from guest agent

by Thomas Huth

qemuAgentFSInfoToPublic() currently only sets the devAlias for PCI devices. However, the QEMU guest agent could also provide the device name in the "dev" field of the response for other devices instead (well, at least after fixing another problem in the current QEMU guest agent...). So if creating the devAlias from the PCI information failed, let's fall back to the name provided by the guest agent. This helps to fix the empty "Target" fields that occur when running "virsh domfsinfo" on s390x where CCW devices are used for the guest instead of PCI devices. Also add a proper debug message here in case we completely failed to set the device alias, since this problem here was very hard to debug: The only two error messages that I've seen were "Unable to get filesystem information" and "Unable to encode message payload" - which only indicates that something went wrong in the RPC call. No debug message indicated the real problem, so I had to learn the hard way why the RPC call failed (it apparently does not like devAlias left to be NULL) and where the real problem comes from. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1755075 Signed-off-by: Thomas Huth <thuth(a)redhat.com> --- src/qemu/qemu_driver.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index d185666ed8..e45c61ee20 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -21935,14 +21935,17 @@ qemuAgentFSInfoToPublic(qemuAgentFSInfoPtr agent, qemuAgentDiskInfoPtr agentdisk = agent->disks[i]; virDomainDiskDefPtr diskDef; - if (!(diskDef = virDomainDiskByAddress(vmdef, - &agentdisk->pci_controller, - agentdisk->bus, - agentdisk->target, - agentdisk->unit))) - continue; - - ret->devAlias[i] = g_strdup(diskDef->dst); + diskDef = virDomainDiskByAddress(vmdef, + &agentdisk->pci_controller, + agentdisk->bus, + agentdisk->target, + agentdisk->unit); + if (diskDef != NULL) + ret->devAlias[i] = g_strdup(diskDef->dst); + else if (agentdisk->devnode != NULL) + ret->devAlias[i] = g_strdup(agentdisk->devnode); + else + VIR_DEBUG("Missing devnode name for '%s'.", ret->mountpoint); } return ret; -- 2.18.1

4 years, 3 months

2
5
0 / 0

[RESEND][PATCH] migration: fix xml file residual during vm crash with migration

by zhengchuan

>From 935ec812b822ca978631e72bb9b9a5d00df24a42 Mon Sep 17 00:00:00 2001 From: Zheng Chuan <zhengchuan(a)huawei.com> Date: Mon, 27 Jul 2020 14:39:05 +0800 Subject: [PATCH] migration: fix xml file residual during vm crash with migration when migration is cancelled (such as kill -9 vmpid in Src, etc), it could do virDomainSaveStatus() to save xml file after qemuProcessStop(), which results in xml residulal. Fix it by that do not do virDomainSaveStatus() if vm is not active. Signed-off-by: Zheng Chuan <zhengchuan(a)huawei.com> --- src/qemu/qemu_migration.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c index 2c7bf34..d2804ab 100644 --- a/src/qemu/qemu_migration.c +++ b/src/qemu/qemu_migration.c @@ -3073,6 +3073,9 @@ qemuMigrationSrcConfirmPhase(virQEMUDriverPtr driver, qemuMigrationParamsReset(driver, vm, QEMU_ASYNC_JOB_MIGRATION_OUT, jobPriv->migParams, priv->job.apiFlags); + if (!virDomainObjIsActive(vm)) + goto done; + if (virDomainObjSave(vm, driver->xmlopt, cfg->stateDir) < 0) VIR_WARN("Failed to save status on vm %s", vm->def->name); } -- 1.8.3.1

4 years, 3 months

3
2
0 / 0

[PATCH] fix vm schizencephaly when heartbeat stoped

by Yilu Lin

>From e28cb2a03a670e4c0e7641f68f9d9f3accb00ae0 Mon Sep 17 00:00:00 2001 From: Yilu Lin <linyilu(a)huawei.com> Date: Tue, 4 Aug 2020 02:42:00 -0400 Subject: [PATCH] fix vm schizencephaly when heartbeat stoped Signed-off-by: Yilu Lin <linyilu(a)huawei.com> If keepalive messages lost in finish step, vm maybe schizencephaly. Shutdown src vm for protection. --- src/qemu/qemu_migration.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c index 2c7bf34..b8296ba 100644 --- a/src/qemu/qemu_migration.c +++ b/src/qemu/qemu_migration.c @@ -4136,6 +4136,8 @@ qemuMigrationSrcPerformPeer2Peer3(virQEMUDriverPtr driver, int cookieoutlen = 0; int ret = -1; virErrorPtr orig_err = NULL; + virErrorPtr finish_err = NULL; + bool living = true; bool cancelled = true; virStreamPtr st = NULL; unsigned long destflags; @@ -4394,7 +4396,16 @@ qemuMigrationSrcPerformPeer2Peer3(virQEMUDriverPtr driver, * The lock manager plugins should take care of * safety in this scenario. */ - cancelled = ddomain == NULL; + if (!cancelled && !ddomain) + finish_err = virSaveLastError(); + + if (finish_err && finish_err->message && + strstr(finish_err->message, "received hangup / error event on socket")) { + living = false; + VIR_ERROR(_("keepalive messages lost in finish step, shutdown src vm for protection")); + } else { + cancelled = ddomain == NULL; + } /* If finish3 set an error, and we don't have an earlier * one we need to preserve it in case confirm3 overwrites @@ -4427,10 +4438,17 @@ qemuMigrationSrcPerformPeer2Peer3(virQEMUDriverPtr driver, virObjectUnref(ddomain); ret = 0; } else { - ret = -1; + if (!living) + ret = 0; + else + ret = -1; } virObjectUnref(st); + if (finish_err) { + virSetError(finish_err); + virFreeError(finish_err); + } virErrorRestore(&orig_err); VIR_FREE(uri_out); -- 2.19.1

4 years, 3 months

2
1
0 / 0

[PATCH 0/5] Prefer WITH_* prefix for #if conditionals

by Michal Privoznik

4 years, 3 months

2
8
0 / 0

[PATCH v2 0/9] qemu: Allow migration over UNIX sockets

by Martin Kletzander

v2: - Allow TLS and parallel migration as well - Use simpler unix socket URIs KubeVirt would like to use this feature. For more information see individual commits and changes in manpages and documentation. Resolves: https://bugzilla.redhat.com/1638889 Martin Kletzander (9): qemu: Use g_autofree in qemuMigrationSrcConnect qemu: Rework qemuMigrationSrcConnect virsh: Reuse existing variable when parsing migrate --disks-port qemu: Rework starting NBD server for migration tests: Add simple test for virDomainMigrateCheckNotLocal qemu: Allow NBD migration over UNIX socket peer2peer migration: allow connecting to local sockets qemu: Allow migration over UNIX socket news: qemu: Allow migration over UNIX sockets NEWS.rst | 6 + docs/manpages/virsh.rst | 33 ++- docs/migration.html.in | 33 +++ include/libvirt/libvirt-domain.h | 13 ++ scripts/apibuild.py | 1 + src/libvirt-domain.c | 11 +- src/libvirt_internal.h | 2 + src/libvirt_private.syms | 1 + src/qemu/qemu_driver.c | 33 ++- src/qemu/qemu_migration.c | 354 +++++++++++++++++++++++-------- src/qemu/qemu_migration.h | 3 + src/qemu/qemu_migration_cookie.c | 3 +- src/qemu/qemu_migration_params.c | 9 + src/qemu/qemu_migration_params.h | 3 + src/qemu/qemu_monitor.c | 15 ++ src/qemu/qemu_monitor.h | 4 + src/remote/remote_driver.c | 8 +- src/util/viruri.c | 30 +++ src/util/viruri.h | 2 + tests/meson.build | 1 + tests/virmigtest.c | 91 ++++++++ tools/virsh-domain.c | 19 +- 22 files changed, 570 insertions(+), 105 deletions(-) create mode 100644 tests/virmigtest.c -- 2.28.0

4 years, 3 months

4
24
0 / 0

[libvirt PATCH 0/3] AUTHORS: Convert to reStructuredText

by Andrea Bolognani

Plus some other adjustments. Andrea Bolognani (3): AUTHORS: Convert to reStructuredText AUTHORS: Some small tweaks AUTHORS: Remove Emacs file variables AUTHORS.in | 103 ----------------------------------- AUTHORS.rst.in | 99 +++++++++++++++++++++++++++++++++ libvirt.spec.in | 2 +- meson.build | 4 +- scripts/meson-gen-authors.py | 2 +- 5 files changed, 103 insertions(+), 107 deletions(-) delete mode 100644 AUTHORS.in create mode 100644 AUTHORS.rst.in -- 2.26.2

4 years, 3 months

2
7
0 / 0

[PATCH] build-aux: use GNU sed for syntax-check on FreeBSD

by Roman Bogorodskiy

BSD sed(1) and GNU sed(1) syntax are not compatible, and as syntax-check.mk uses the GNU flavor, set SED variable to 'gsed' by default. Signed-off-by: Roman Bogorodskiy <bogorodskiy(a)gmail.com> --- build-aux/syntax-check.mk | 8 ++++++++ 1 file changed, 8 insertions(+) I'm not sure if this requires a more comprehensive solution. I have mixed feeling about this. If we try to just use gsed like in this patch, it'll fail because we don't require gsed to be installed. OTOH, an alternative solution like checking for gsed in meson.build, and probably even generation of some files with variables to be sourced by .mk files feels like too much of a hassle, esp. in this context. diff --git a/build-aux/syntax-check.mk b/build-aux/syntax-check.mk index 6eb59cf90e..bbfcb63152 100644 --- a/build-aux/syntax-check.mk +++ b/build-aux/syntax-check.mk @@ -28,7 +28,15 @@ ME := build-aux/syntax-check.mk # ignoring the module description. AWK ?= awk GREP ?= grep +# FreeBSD (and probably some other OSes too) ships own version of sed(1), not +# compatible with the GNU sed. GNU sed is available as gsed(1), so use this +# instead +UNAME := $(shell uname) +ifeq ($(UNAME),FreeBSD) +SED ?= gsed +else SED ?= sed +endif # Helper variables. _empty = -- 2.27.0

4 years, 3 months

2
3
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Devel September 2020