Re: [libvirt] [Qemu-devel] Qemu migration with vhost-user-blk on top of local storage
by Stefan Hajnoczi
On Wed, Jan 09, 2019 at 06:23:42PM +0800, wuzhouhui wrote:
> Hi everyone,
>
> I'm working qemu with vhost target (e.g. spdk), and I attempt to migrate VM with
> 2 local storages. One local storage is a regular file, e.g. /tmp/c74.qcow2, and
> the other is a malloc bdev that spdk created. This malloc bdev will exported to
> VM via vhost-user-blk. When I execute following command:
>
> virsh migrate --live --persistent --unsafe --undefinesource --copy-storage-all \
> --p2p --auto-converge --verbose --desturi qemu+tcp://<uri>/system vm0
>
> The libvirt reports:
>
> qemu-2.12.1: error: internal error: unable to execute QEMU command \
> 'nbd-server-add': Cannot find device=drive-virtio-disk1 nor \
> node_name=drive-virtio-disk1
Please post your libvirt domain XML.
> Does it means that qemu with spdk on top of local storage don't support migration?
>
> QEMU: 2.12.1
> SPDK: 18.10
vhost-user-blk bypasses the QEMU block layer, so NBD storage migration
at the QEMU level will not work for the vhost-user-blk disk.
Stefan
1 year, 2 months
[libvirt] [PATCH v3] openvswitch: Add new port VLAN mode "dot1q-tunnel"
by luzhipeng＠uniudc.com
From: ZhiPeng Lu <luzhipeng(a)uniudc.com>
Signed-off-by: ZhiPeng Lu <luzhipeng(a)uniudc.com>
---
v1->v2:
1. Fix "make syntax-check" failure
v2->v3:
1. remove other_config when updating vlan
docs/formatnetwork.html.in | 17 +++++++++--------
docs/schemas/networkcommon.rng | 1 +
src/conf/netdev_vlan_conf.c | 2 +-
src/util/virnetdevopenvswitch.c | 7 +++++++
src/util/virnetdevvlan.h | 1 +
5 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in
index 363a72b..3c1ae62 100644
--- a/docs/formatnetwork.html.in
+++ b/docs/formatnetwork.html.in
@@ -688,16 +688,17 @@
</p>
<p>
For network connections using Open vSwitch it is also possible
- to configure 'native-tagged' and 'native-untagged' VLAN modes
+ to configure 'native-tagged' and 'native-untagged' and 'dot1q-tunnel'
+ VLAN modes.
<span class="since">Since 1.1.0.</span> This is done with the
- optional <code>nativeMode</code> attribute on
- the <code><tag></code> subelement: <code>nativeMode</code>
- may be set to 'tagged' or 'untagged'. The <code>id</code>
- attribute of the <code><tag></code> subelement
- containing <code>nativeMode</code> sets which VLAN is considered
- to be the "native" VLAN for this interface, and
+ optional <code>nativeMode</code> attribute on the
+ <code><tag></code> subelement: <code>nativeMode</code>
+ may be set to 'tagged' or 'untagged' or 'dot1q-tunnel'.
+ The <code>id</code> attribute of the <code><tag></code>
+ subelement containing <code>nativeMode</code> sets which VLAN is
+ considered to be the "native" VLAN for this interface, and
the <code>nativeMode</code> attribute determines whether or not
- traffic for that VLAN will be tagged.
+ traffic for that VLAN will be tagged or QinQ.
</p>
<p>
<code><vlan></code> elements can also be specified in
diff --git a/docs/schemas/networkcommon.rng b/docs/schemas/networkcommon.rng
index 2699555..11c48ff 100644
--- a/docs/schemas/networkcommon.rng
+++ b/docs/schemas/networkcommon.rng
@@ -223,6 +223,7 @@
<choice>
<value>tagged</value>
<value>untagged</value>
+ <value>dot1q-tunnel</value>
</choice>
</attribute>
</optional>
diff --git a/src/conf/netdev_vlan_conf.c b/src/conf/netdev_vlan_conf.c
index dff49c6..79710d9 100644
--- a/src/conf/netdev_vlan_conf.c
+++ b/src/conf/netdev_vlan_conf.c
@@ -29,7 +29,7 @@
#define VIR_FROM_THIS VIR_FROM_NONE
VIR_ENUM_IMPL(virNativeVlanMode, VIR_NATIVE_VLAN_MODE_LAST,
- "default", "tagged", "untagged")
+ "default", "tagged", "untagged", "dot1q-tunnel")
int
virNetDevVlanParse(xmlNodePtr node, xmlXPathContextPtr ctxt, virNetDevVlanPtr def)
diff --git a/src/util/virnetdevopenvswitch.c b/src/util/virnetdevopenvswitch.c
index 8fe06fd..9fec30b 100644
--- a/src/util/virnetdevopenvswitch.c
+++ b/src/util/virnetdevopenvswitch.c
@@ -91,6 +91,11 @@ virNetDevOpenvswitchConstructVlans(virCommandPtr cmd, virNetDevVlanPtr virtVlan)
virCommandAddArg(cmd, "vlan_mode=native-untagged");
virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag);
break;
+ case VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL:
+ virCommandAddArg(cmd, "vlan_mode=dot1q-tunnel");
+ virCommandAddArg(cmd, "other_config:qinq-ethtype=802.1q");
+ virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag);
+ break;
case VIR_NATIVE_VLAN_MODE_DEFAULT:
default:
break;
@@ -504,6 +509,8 @@ int virNetDevOpenvswitchUpdateVlan(const char *ifname,
"--", "--if-exists", "clear", "Port", ifname, "tag",
"--", "--if-exists", "clear", "Port", ifname, "trunk",
"--", "--if-exists", "clear", "Port", ifname, "vlan_mode",
+ "--", "--if-exists", "remove", "Port", ifname, "other_config",
+ "qinq-ethtype", NULL,
"--", "--if-exists", "set", "Port", ifname, NULL);
if (virNetDevOpenvswitchConstructVlans(cmd, virtVlan) < 0)
diff --git a/src/util/virnetdevvlan.h b/src/util/virnetdevvlan.h
index be85f59..0667f9d 100644
--- a/src/util/virnetdevvlan.h
+++ b/src/util/virnetdevvlan.h
@@ -29,6 +29,7 @@ typedef enum {
VIR_NATIVE_VLAN_MODE_DEFAULT = 0,
VIR_NATIVE_VLAN_MODE_TAGGED,
VIR_NATIVE_VLAN_MODE_UNTAGGED,
+ VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL,
VIR_NATIVE_VLAN_MODE_LAST
} virNativeVlanMode;
--
1.8.3.1
1 year, 2 months
[libvirt] [PATCH] Fix compile error for stable 1.2.9
by Yang hongyang
Seems a backport miss. An extra member is passed to struct
virLXCBasicMountInfo.
Signed-off-by: Yang hongyang <hongyang.yang(a)easystack.cn>
---
src/lxc/lxc_container.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/src/lxc/lxc_container.c b/src/lxc/lxc_container.c
index 28dabec..1c65fa9 100644
--- a/src/lxc/lxc_container.c
+++ b/src/lxc/lxc_container.c
@@ -760,7 +760,7 @@ typedef struct {
static const virLXCBasicMountInfo lxcBasicMounts[] = {
{ "proc", "/proc", "proc", MS_NOSUID|MS_NOEXEC|MS_NODEV, false, false },
- { "/proc/sys", "/proc/sys", NULL, MS_BIND|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false, false },
+ { "/proc/sys", "/proc/sys", NULL, MS_BIND|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false },
{ "sysfs", "/sys", "sysfs", MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false },
{ "securityfs", "/sys/kernel/security", "securityfs", MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, true, true },
#if WITH_SELINUX
--
1.7.1
1 year, 2 months
[libvirt] Supporting vhost-net and macvtap in libvirt for QEMU
by Anthony Liguori
Disclaimer: I am neither an SR-IOV nor a vhost-net expert, but I've CC'd
people that are who can throw tomatoes at me for getting bits wrong :-)
I wanted to start a discussion about supporting vhost-net in libvirt.
vhost-net has not yet been merged into qemu but I expect it will be soon
so it's a good time to start this discussion.
There are two modes worth supporting for vhost-net in libvirt. The
first mode is where vhost-net backs to a tun/tap device. This is
behaves in very much the same way that -net tap behaves in qemu today.
Basically, the difference is that the virtio backend is in the kernel
instead of in qemu so there should be some performance improvement.
Current, libvirt invokes qemu with -net tap,fd=X where X is an already
open fd to a tun/tap device. I suspect that after we merge vhost-net,
libvirt could support vhost-net in this mode by just doing -net
vhost,fd=X. I think the only real question for libvirt is whether to
provide a user visible switch to use vhost or to just always use vhost
when it's available and it makes sense. Personally, I think the later
makes sense.
The more interesting invocation of vhost-net though is one where the
vhost-net device backs directly to a physical network card. In this
mode, vhost should get considerably better performance than the current
implementation. I don't know the syntax yet, but I think it's
reasonable to assume that it will look something like -net
tap,dev=eth0. The effect will be that eth0 is dedicated to the guest.
On most modern systems, there is a small number of network devices so
this model is not all that useful except when dealing with SR-IOV
adapters. In that case, each physical device can be exposed as many
virtual devices (VFs). There are a few restrictions here though. The
biggest is that currently, you can only change the number of VFs by
reloading a kernel module so it's really a parameter that must be set at
startup time.
I think there are a few ways libvirt could support vhost-net in this
second mode. The simplest would be to introduce a new tag similar to
<source network='br0'>. In fact, if you probed the device type for the
network parameter, you could probably do something like <source
network='eth0'> and have it Just Work.
Another model would be to have libvirt see an SR-IOV adapter as a
network pool whereas it handled all of the VF management. Considering
how inflexible SR-IOV is today, I'm not sure whether this is the best model.
Has anyone put any more thought into this problem or how this should be
modeled in libvirt? Michael, could you share your current thinking for
-net syntax?
--
Regards,
Anthony Liguori
1 year, 2 months
[PATCH] Qemu: migration: Not bind RAM info with active migration status
by Keqian Zhu
For that Qemu supports returning incoming migration info since its commit
65ace0604551 (migration: add postcopy total blocktime into query-migrate),
which may contains active status, but without RAM info. Drop this binding
relationship check in libvirt.
Signed-off-by: Keqian Zhu <zhukeqian1(a)huawei.com>
---
src/qemu/qemu_monitor_json.c | 88 +++++++++++++++++-------------------
1 file changed, 42 insertions(+), 46 deletions(-)
diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
index d808c4b55b..ba8e340742 100644
--- a/src/qemu/qemu_monitor_json.c
+++ b/src/qemu/qemu_monitor_json.c
@@ -3547,56 +3547,52 @@ qemuMonitorJSONGetMigrationStatsReply(virJSONValuePtr reply,
case QEMU_MONITOR_MIGRATION_STATUS_PRE_SWITCHOVER:
case QEMU_MONITOR_MIGRATION_STATUS_DEVICE:
ram = virJSONValueObjectGetObject(ret, "ram");
- if (!ram) {
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("migration was active, but no RAM info was set"));
- return -1;
- }
+ if (ram) {
+ if (virJSONValueObjectGetNumberUlong(ram, "transferred",
+ &stats->ram_transferred) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("migration was active, but RAM 'transferred' "
+ "data was missing"));
+ return -1;
+ }
+ if (virJSONValueObjectGetNumberUlong(ram, "remaining",
+ &stats->ram_remaining) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("migration was active, but RAM 'remaining' "
+ "data was missing"));
+ return -1;
+ }
+ if (virJSONValueObjectGetNumberUlong(ram, "total",
+ &stats->ram_total) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("migration was active, but RAM 'total' "
+ "data was missing"));
+ return -1;
+ }
- if (virJSONValueObjectGetNumberUlong(ram, "transferred",
- &stats->ram_transferred) < 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("migration was active, but RAM 'transferred' "
- "data was missing"));
- return -1;
- }
- if (virJSONValueObjectGetNumberUlong(ram, "remaining",
- &stats->ram_remaining) < 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("migration was active, but RAM 'remaining' "
- "data was missing"));
- return -1;
- }
- if (virJSONValueObjectGetNumberUlong(ram, "total",
- &stats->ram_total) < 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("migration was active, but RAM 'total' "
- "data was missing"));
- return -1;
- }
+ if (virJSONValueObjectGetNumberDouble(ram, "mbps", &mbps) == 0 &&
+ mbps > 0) {
+ /* mpbs from QEMU reports Mbits/s (M as in 10^6 not Mi as 2^20) */
+ stats->ram_bps = mbps * (1000 * 1000 / 8);
+ }
- if (virJSONValueObjectGetNumberDouble(ram, "mbps", &mbps) == 0 &&
- mbps > 0) {
- /* mpbs from QEMU reports Mbits/s (M as in 10^6 not Mi as 2^20) */
- stats->ram_bps = mbps * (1000 * 1000 / 8);
+ if (virJSONValueObjectGetNumberUlong(ram, "duplicate",
+ &stats->ram_duplicate) == 0)
+ stats->ram_duplicate_set = true;
+ ignore_value(virJSONValueObjectGetNumberUlong(ram, "normal",
+ &stats->ram_normal));
+ ignore_value(virJSONValueObjectGetNumberUlong(ram, "normal-bytes",
+ &stats->ram_normal_bytes));
+ ignore_value(virJSONValueObjectGetNumberUlong(ram, "dirty-pages-rate",
+ &stats->ram_dirty_rate));
+ ignore_value(virJSONValueObjectGetNumberUlong(ram, "page-size",
+ &stats->ram_page_size));
+ ignore_value(virJSONValueObjectGetNumberUlong(ram, "dirty-sync-count",
+ &stats->ram_iteration));
+ ignore_value(virJSONValueObjectGetNumberUlong(ram, "postcopy-requests",
+ &stats->ram_postcopy_reqs));
}
- if (virJSONValueObjectGetNumberUlong(ram, "duplicate",
- &stats->ram_duplicate) == 0)
- stats->ram_duplicate_set = true;
- ignore_value(virJSONValueObjectGetNumberUlong(ram, "normal",
- &stats->ram_normal));
- ignore_value(virJSONValueObjectGetNumberUlong(ram, "normal-bytes",
- &stats->ram_normal_bytes));
- ignore_value(virJSONValueObjectGetNumberUlong(ram, "dirty-pages-rate",
- &stats->ram_dirty_rate));
- ignore_value(virJSONValueObjectGetNumberUlong(ram, "page-size",
- &stats->ram_page_size));
- ignore_value(virJSONValueObjectGetNumberUlong(ram, "dirty-sync-count",
- &stats->ram_iteration));
- ignore_value(virJSONValueObjectGetNumberUlong(ram, "postcopy-requests",
- &stats->ram_postcopy_reqs));
-
disk = virJSONValueObjectGetObject(ret, "disk");
if (disk) {
rc = virJSONValueObjectGetNumberUlong(disk, "transferred",
--
2.19.1
3 years, 11 months
Release of libvirt-6.5.0
by Daniel Veillard
Half a day late, but I pushed the 6.5.0 release out, it is as usual
available as a signed tarball and source rpms from the server:
https://libvirt.org/sources/
I also tagged and pushed the 6.5.0 python bindings that one can find at
https://libvirt.org/sources/python/
This release includes a number of new features and some improvement,
as well as a crash which had made its way in 6.4.0.
It will also be my last release of libvirt after close to 15 years,
so expect new releases to be signed by Jiri Denemark from now on.
* New Features:
- Allow firmware blobs configuration
QEMU offers a way to tweak how firmware configures itself
and/or provide new configuration blobs. New ``<sysinfo/>``
type is introduced that will hold these new blobs.
It's possible to either specify new value as a string or
provide a filename which contents then serve as the value.
- nodedev: Add ability to create mediated devices
Mediated devices can now be created with ``virNodeDeviceCreateXML()``. This
functionality requires the ``mdevctl`` utility to be installed. The XML
schema for node devices was expanded to support attributes for mediated
devices.
- QEMU: add TPM Proxy device support
libvirt can now create guests using a new device type called
"TPM Proxy". The TPM Proxy connects to a TPM Resource Manager
present in the host, enabling the guest to run in secure virtual
machine mode with the help of an Ultravisor. Adding a TPM Proxy to
a pSeries guest brings no security benefits unless the guest is
running on a PPC64 host that has Ultravisor and TPM Resource Manager
support. Only one TPM Proxy is allowed per guest. A guest using
a TPM Proxy device can instantiate another TPM device at the same
time. This device is supported only for pSeries guests via the new
'spapr-tpm-proxy' model of the TPM 'passthrough' backend.
- virhook: Support hooks placed in several files
Running all scripts from directory /etc/libvirt/hooks/<driver>.d in
alphabetical order. Hook script in old place will be executed
as first for backward compatibility.
- qemu: Add support for migratable host-passthrough CPU
QEMU 2.12 made it possible for guests to use a migration-friendly
version of the host-passthrough CPU. This feature is now exposed by
libvirt.
* Improvements:
- network: Support NAT with IPv6
It's now possible to use ``<nat ipv6="yes"/>`` in a libvirt network.
- qemu: Auto-fill NUMA information for incomplete topologies
If the NUMA topology is not fully described in the guest XML, libvirt
will complete it by putting all unspecified CPUs in the first NUMA node.
This is only done in the QEMU binary itself supports disjointed CPU
ranges for NUMA nodes.
- qemu: Assign hostdev-backed interfaces to PCIe slots
All SR-IOV capable devices are PCIe, so when their VFs are assigned to
guests they should end up in PCIe slots rather than conventional PCI ones.
* Bug fixes:
- qemu: fixed crash in ``qemuDomainBlockCommit``
This release fixes a regression which was introduced in libvirt v6.4.0
where libvirtd always crashes when a block commit of a disk is requested.
- qemu: fixed zPCI address auto generation on s390
Removes the correlation between the zPCI address attributes uid and fid.
Fixes the validation and autogeneration of zPCI address attributes.
- qemu: Skip pre-creation of NVMe disks during migration
libvirt has no way to create NVMe devices on the target host, so it now
just makes sure they exist and let the migration proceed in that case.
Thanks everybody for the help on putting this release out, and
the gazillion ones before :-)
Enjoy and stay safe !
Daniel
--
Daniel Veillard | Red Hat Developers Tools http://developer.redhat.com/
veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/
http://veillard.com/ | virtualization library http://libvirt.org/
3 years, 11 months
[PATCH] virt-aa-helper: disallow graphics socket read permissions
by Simon Arlott
The VM does not need read permission for its own sockets to create(),
bind(), accept() connections or to recv(), send(), etc. on connections.
This was fixed in ab9569e5460d1e4737fe8b625c67687dc2204665
(virt-aa-helper: disallow VNC socket read permissions),
but then b6465e1aa49397367a9cd0f27110b9c2280a7385
(graphics: introduce new listen type 'socket')
and acc83afe333bfadd3f7f79091d38ca3d7da1eeb2
(acc83afe333bfadd3f7f79091d38ca3d7da1eeb2) reverted it.
Unless the read permission is omitted, VMs can connect to each other's
VNC/graphics sockets.
Signed-off-by: Simon Arlott <libvirt(a)octiron.net>
---
src/security/virt-aa-helper.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/security/virt-aa-helper.c b/src/security/virt-aa-helper.c
index 6e6dd1b1db..fddbdafc41 100644
--- a/src/security/virt-aa-helper.c
+++ b/src/security/virt-aa-helper.c
@@ -1053,7 +1053,7 @@ get_files(vahControl * ctl)
if (listenObj.type == VIR_DOMAIN_GRAPHICS_LISTEN_TYPE_SOCKET &&
listenObj.socket &&
- vah_add_file(&buf, listenObj.socket, "rw"))
+ vah_add_file(&buf, listenObj.socket, "w"))
goto cleanup;
}
}
--
2.17.1
--
Simon Arlott
3 years, 11 months
