June 2020 - Devel - libvirt List Archives

[libvirt PATCH] rpm: adapt docs filelist to NEWS -> NEWS.rst rename
by Daniel P. Berrangé 09 Jun '20

09 Jun '20

Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com> --- Pushed as a CI fix libvirt.spec.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/libvirt.spec.in b/libvirt.spec.in index 6abf97df85..262e66f3cc 100644 --- a/libvirt.spec.in +++ b/libvirt.spec.in @@ -1505,7 +1505,7 @@ exit 0 %files %files docs -%doc AUTHORS ChangeLog NEWS README README.rst +%doc AUTHORS ChangeLog NEWS.rst README README.rst %doc %{_vpath_builddir}/libvirt-docs/* %files daemon -- 2.26.2

1 0

[PATCH 0/5] NUMA CPUs 'auto-fill' for incomplete topologies
by Daniel Henrique Barboza 08 Jun '20

08 Jun '20

Hi, This series implements a convenience feature for the case where the user defines an incomplete NUMA topology in the domain, when the sum of all cpus in each NUMA cell is less than the maximum vcpus count of the domain. This is an implementation based on Peter Krempa's suggestion in [1]. The documentation patch (04), aside from documentating this new behavior, while also letting the user know that using incomplete NUMA topologies are not advised. This feature does not break migration ABI. I tested it in a migration using an incomplete NUMA topology domain to migrate to another host with a patched Libvirt. A guest with this NUMA topology, declaring 9 vcpus and short of 7 vcpus to complete the total of 16: <vcpu placement='auto'>16</vcpu> [...] <cpu mode='custom' match='exact' check='none'> <model fallback='forbid'>POWER9</model> <numa> <cell id='0' cpus='0-1,6' memory='3906250' unit='KiB'/> <cell id='1' cpus='2-4' memory='3906250' unit='KiB'/> <cell id='2' cpus='10,12' memory='3906250' unit='KiB'/> <cell id='3' cpus='14' memory='3906250' unit='KiB'/> </numa> </cpu> Successfully migrates to a patched Libvirt, ending up with this topology where the missing VCPUs were added to node 0: <vcpu placement='auto'>16</vcpu> [...] <cpu mode='custom' match='exact' check='none'> <model fallback='forbid'>POWER9</model> <numa> <cell id='0' cpus='0-1,5-9,11,13,15' memory='3932160' unit='KiB'/> <cell id='1' cpus='2-4' memory='3932160' unit='KiB'/> <cell id='2' cpus='10,12' memory='3932160' unit='KiB'/> <cell id='3' cpus='14' memory='3932160' unit='KiB'/> </numa> </cpu> [1] https://www.redhat.com/archives/libvir-list/2019-June/msg00263.html Daniel Henrique Barboza (5): numa_conf.c: add helper functions for cpumap operations qemu_domain.c: NUMA CPUs auto-fill for incomplete topologies qemuxml2xmltest.c: add NUMA vcpus auto fill tests formatdomain.html.in: document the NUMA cpus auto fill feature qemu_validate.c: revert NUMA CPU range user warning docs/formatdomain.html.in | 11 ++++- src/conf/numa_conf.c | 46 ++++++++++++++++++ src/conf/numa_conf.h | 3 ++ src/libvirt_private.syms | 1 + src/qemu/qemu_domain.c | 47 +++++++++++++++++++ src/qemu/qemu_domain.h | 4 ++ src/qemu/qemu_driver.c | 9 ++++ src/qemu/qemu_validate.c | 19 ++------ .../numavcpus-topology-mismatch.xml | 37 +++++++++++++++ ...avcpus-topology-mismatch.x86_64-latest.xml | 38 +++++++++++++++ tests/qemuxml2xmltest.c | 1 + 11 files changed, 201 insertions(+), 15 deletions(-) create mode 100644 tests/qemuxml2argvdata/numavcpus-topology-mismatch.xml create mode 100644 tests/qemuxml2xmloutdata/numavcpus-topology-mismatch.x86_64-latest.xml -- 2.26.2

3 10

[PATCH v6 00/10] Introducing TPM Proxy device support for PPC64
by Daniel Henrique Barboza 08 Jun '20

08 Jun '20

No functional changes made from the previous version. Just a rebase and a trivial conflict fix in news.xml after Libvirt 6.4.0 release. changes in v6: - fixed news.xml conflict after 6.4.0 release, moved the change to 6.5.0 - added Stefan's r-b on patches 4, 5 and 6 - added Satheesh's tested-by tag on all patches Gitlab tree: https://gitlab.com/danielhb/libvirt/tree/spapr_tpm_proxy_v6 v5 link: https://www.redhat.com/archives/libvir-list/2020-May/msg00997.html v4 link: https://www.redhat.com/archives/libvir-list/2020-May/msg00814.html v3 link: https://www.redhat.com/archives/libvir-list/2020-May/msg00642.html v2 link: https://www.redhat.com/archives/libvir-list/2020-May/msg00604.html v1 link: https://www.redhat.com/archives/libvir-list/2020-May/msg00351.html Daniel Henrique Barboza (10): docs: documentation and schema for the new TPM Proxy model qemu: Extend QEMU capabilities with 'spapr-tpm-proxy' qemu_extdevice.c: remove unneeded 'ret' variable qemu_tpm, security, tests: change 'switch' clauses for 'if' conf, qemu, security, tests: introducing 'def->tpms' array qemu: add validations after TPM Proxy model introduction tests: add XML schema tests for the TPM Proxy device qemu: build command line for the TPM Proxy device tests/qemuxml2argvtest.c: add TPM Proxy command line tests docs/news.xml: update for the new TPM Proxy device docs/formatdomain.html.in | 19 ++++- docs/news.xml | 17 +++++ docs/schemas/domaincommon.rng | 1 + src/conf/domain_audit.c | 4 +- src/conf/domain_conf.c | 50 +++++++----- src/conf/domain_conf.h | 6 +- src/qemu/qemu_alias.c | 9 ++- src/qemu/qemu_capabilities.c | 4 + src/qemu/qemu_capabilities.h | 3 + src/qemu/qemu_cgroup.c | 10 ++- src/qemu/qemu_command.c | 59 +++++++++++--- src/qemu/qemu_domain.c | 68 ++++++++++++++--- src/qemu/qemu_domain_address.c | 11 ++- src/qemu/qemu_extdevice.c | 24 +++--- src/qemu/qemu_tpm.c | 76 +++++++++---------- src/qemu/qemu_validate.c | 19 +++++ src/security/security_dac.c | 8 +- src/security/security_selinux.c | 44 +++++------ src/security/virt-aa-helper.c | 14 ++-- .../qemucapabilitiesdata/caps_4.2.0.ppc64.xml | 1 + .../qemucapabilitiesdata/caps_5.0.0.ppc64.xml | 1 + tests/qemuxml2argvdata/ppc64-tpm-double.xml | 34 +++++++++ .../ppc64-tpmproxy-double.xml | 38 ++++++++++ .../ppc64-tpmproxy-single.ppc64-latest.args | 34 +++++++++ .../ppc64-tpmproxy-single.xml | 33 ++++++++ .../ppc64-tpmproxy-with-tpm.ppc64-latest.args | 37 +++++++++ .../ppc64-tpmproxy-with-tpm.xml | 36 +++++++++ tests/qemuxml2argvtest.c | 33 +++++--- .../ppc64-tpmproxy-single.ppc64-latest.xml | 42 ++++++++++ .../ppc64-tpmproxy-with-tpm.ppc64-latest.xml | 46 +++++++++++ tests/qemuxml2xmltest.c | 2 + 31 files changed, 631 insertions(+), 152 deletions(-) create mode 100644 tests/qemuxml2argvdata/ppc64-tpm-double.xml create mode 100644 tests/qemuxml2argvdata/ppc64-tpmproxy-double.xml create mode 100644 tests/qemuxml2argvdata/ppc64-tpmproxy-single.ppc64-latest.args create mode 100644 tests/qemuxml2argvdata/ppc64-tpmproxy-single.xml create mode 100644 tests/qemuxml2argvdata/ppc64-tpmproxy-with-tpm.ppc64-latest.args create mode 100644 tests/qemuxml2argvdata/ppc64-tpmproxy-with-tpm.xml create mode 100644 tests/qemuxml2xmloutdata/ppc64-tpmproxy-single.ppc64-latest.xml create mode 100644 tests/qemuxml2xmloutdata/ppc64-tpmproxy-with-tpm.ppc64-latest.xml -- 2.26.2

1 11

[PATCH] qemu: blockcommit: Fix placement of qemuDomainDiskBlockJobIsSupported
by Peter Krempa 08 Jun '20

08 Jun '20

Commit b50a8354f6d added call to qemuDomainDiskBlockJobIsSupported prior to filling the 'disk' variable resulting in a crash when attempting a block commit. Signed-off-by: Peter Krempa <pkrempa(a)redhat.com> --- src/qemu/qemu_driver.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index dd9ae30bb5..88517ba6a7 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -18504,9 +18504,6 @@ qemuDomainBlockCommit(virDomainPtr dom, if (virDomainObjCheckActive(vm) < 0) goto endjob; - if (!qemuDomainDiskBlockJobIsSupported(vm, disk)) - goto endjob; - blockdev = virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_BLOCKDEV); /* Convert bandwidth MiB to bytes, if necessary */ @@ -18523,6 +18520,9 @@ qemuDomainBlockCommit(virDomainPtr dom, if (!(disk = qemuDomainDiskByName(vm->def, path))) goto endjob; + if (!qemuDomainDiskBlockJobIsSupported(vm, disk)) + goto endjob; + if (virStorageSourceIsEmpty(disk->src)) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, _("disk %s has no source file to be committed"), -- 2.26.2

2 1

[libvirt PATCH 0/4] po: misc fixes after conversion to weblate
by Daniel P. Berrangé 08 Jun '20

08 Jun '20

A bunch of random stuff that was missed in my first series converting to weblate. Daniel P. Berrangé (4): po: update docs to refer to Weblate instead of Zanata po: remove obsolete zanata push/pull rules po: remove obsolete zanata config file po: fix update-po target to take account of libvirt.pot in srcdir README.rst | 3 ++ docs/contribute.html.in | 4 +- docs/hacking.rst | 10 ++-- po/Makefile.am | 23 ++------- po/README.rst | 111 +++++++++++----------------------------- po/zanata.xml | 7 --- 6 files changed, 46 insertions(+), 112 deletions(-) delete mode 100644 po/zanata.xml -- 2.26.2

2 5

[libvirt PATCH] gitlab-ci: Enable FreeBSD native builds
by Erik Skultety 05 Jun '20

05 Jun '20

The runners have already been registered to the libvirt gitlab CI, we just need to enable building on them. Apart from adding respective CI job labels, the native job had to be tweaked so that the build dir inside the git repo is deleted before the build runs to always star with a clean environment, this results in a NOP on in the container workloads. Signed-off-by: Erik Skultety <eskultet(a)redhat.com> --- .gitlab-ci.yml | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 7113a1283c..33b83b0bb3 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -25,6 +25,7 @@ stages: before_script: - *script_variables script: + - rm -rf build - mkdir build - cd build - ../autogen.sh || (cat config.log && exit 1) @@ -109,6 +110,16 @@ x64-ubuntu-2004: <<: *native_build_default_job_definition image: quay.io/libvirt/buildenv-libvirt-ubuntu-2004:latest +x64-freebsd-11: + <<: *native_build_default_job_definition + tags: + - freebsd-11 + +x64-freebsd-12: + <<: *native_build_default_job_definition + tags: + - freebsd-12 + # Cross compiled build jobs -- 2.26.2

1 0

Minor typo on https://libvirt.org/kbase/backing_chains.html
by Roland Clobus 05 Jun '20

05 Jun '20

Hello all, I've found a minor typo on https://libvirt.org/kbase/backing_chains.html In the section 'Manual image creation' the word 'create' was missing from the command line: Current: qemu-img -f qcow2 -F qcow2 -b $BACKING_IMAGE_PATH $IMAGE_PATH Corrected: qemu-img create -f qcow2 -F qcow2 -b $BACKING_IMAGE_PATH $IMAGE_PATH With kind regards, Roland Clobus

3 2

[libvirt PATCH] docs: backing chains: fix qemu-img invocation
by Ján Tomko 05 Jun '20

05 Jun '20

The example was missing the 'create' command. Signed-off-by: Ján Tomko <jtomko(a)redhat.com> Reported-by: Roland Clobus <rclobus(a)rclobus.nl> --- Pushed as trivial. docs/kbase/backing_chains.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/kbase/backing_chains.rst b/docs/kbase/backing_chains.rst index c112f2bc82..c3de37f4d1 100644 --- a/docs/kbase/backing_chains.rst +++ b/docs/kbase/backing_chains.rst @@ -120,7 +120,7 @@ means that the **-F** parameter of ``qemu-img`` must always be used. :: - qemu-img -f qcow2 -F qcow2 -b $BACKING_IMAGE_PATH $IMAGE_PATH + qemu-img create -f qcow2 -F qcow2 -b $BACKING_IMAGE_PATH $IMAGE_PATH Note that if ``$BACKING_IMAGE_PATH`` is relative the path is considered relative to the location of ``$IMAGE_PATH``. -- 2.25.4

1 0

[libvirt PATCH v2 0/3] news: Convert to reStructuredText
by Andrea Bolognani 05 Jun '20

05 Jun '20

browse: https://gitlab.com/abologna/libvirt/-/tree/news-convert-cleanup git fetch: https://gitlab.com/abologna/libvirt.git news-convert-cleanup Changes since [v1] * use '*' for all bullet points, regardless of how deep they're nested; * patches 1/5 and 2/5 have been pushed. [v1] https://www.redhat.com/archives/libvir-list/2020-June/msg00061.html Andrea Bolognani (3): news: Output reStructuredText for the ASCII version news: Convert to reStructuredText news: Add information about old releases Makefile.am | 22 +- NEWS.rst | 4077 ++++++++++++++++++++++++++++ docs/Makefile.am | 27 +- docs/libvirt.css | 15 - docs/news-2005.html.in | 28 - docs/news-2006.html.in | 354 --- docs/news-2007.html.in | 534 ---- docs/news-2008.html.in | 580 ---- docs/news-2009.html.in | 1603 ----------- docs/news-2010.html.in | 2218 --------------- docs/news-2011.html.in | 3314 ----------------------- docs/news-2012.html.in | 3012 --------------------- docs/news-2013.html.in | 3675 ------------------------- docs/news-2014.html.in | 3418 ------------------------ docs/news-2015.html.in | 2864 -------------------- docs/news-2016.html.in | 3740 -------------------------- docs/news-ascii.xsl | 69 - docs/news-html.xsl | 106 - docs/news.rng | 72 - docs/news.xml | 5473 -------------------------------------- scripts/reformat-news.py | 102 - tests/virschematest.c | 2 - 22 files changed, 4089 insertions(+), 31216 deletions(-) create mode 100644 NEWS.rst delete mode 100644 docs/news-2005.html.in delete mode 100644 docs/news-2006.html.in delete mode 100644 docs/news-2007.html.in delete mode 100644 docs/news-2008.html.in delete mode 100644 docs/news-2009.html.in delete mode 100644 docs/news-2010.html.in delete mode 100644 docs/news-2011.html.in delete mode 100644 docs/news-2012.html.in delete mode 100644 docs/news-2013.html.in delete mode 100644 docs/news-2014.html.in delete mode 100644 docs/news-2015.html.in delete mode 100644 docs/news-2016.html.in delete mode 100644 docs/news-ascii.xsl delete mode 100644 docs/news-html.xsl delete mode 100644 docs/news.rng delete mode 100644 docs/news.xml delete mode 100755 scripts/reformat-news.py -- 2.25.4

2 4

Handling merge requests from Weblate translation
by Daniel P. Berrangé 05 Jun '20

05 Jun '20

The libvirt project is now converted to use Weblate for translation. Weblate has its own fork of libvirt git repos. With weblate managing translations, NEVER, under any circumstances should anyone change the .po files in libvirt.git directly. This will result in merge conflicts with Weblate that need tedious manual resolution. Any .po file changes must always be done via the Weblate UI. Changes made in the weblate UI are not committed to its fork immediately. Weblate will wait upto 24 hours before committing. It will keep changes by each translator as separate commits, and will add SoB lines to them. When it has commits ready, it opens a merge request in GitLab. If it has more commits later and the merge request is still open, it will just push to the pre-existing merge request instead of opening a new one. What this means is that if we immediately approve & merge a weblate merge request, it'll likely open a new one the very next day. I don't think we want to be opening & closing 30 merge requests a month for translations. Thus I'm suggesting that we leave weblate merge requests open to accumulate new commits. Only approve & merge them during the freeze period. Any time we update the libvirt.pot, weblate will msgmerge all the .po files and submit them back to libvirt. These are going to be quite large commits. My intention is to only update the libvirt.pot at the time that we start the release freeze period. This leaves a week to receive new translations, during which time libvirt strings shouldn't be changing much anyway, since we're in bugfix only mode. Regards, Daniel -- |: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|

1 0