Re: [libvirt] [Qemu-devel] Qemu migration with vhost-user-blk on top of local storage
by Stefan Hajnoczi
On Wed, Jan 09, 2019 at 06:23:42PM +0800, wuzhouhui wrote:
> Hi everyone,
>
> I'm working qemu with vhost target (e.g. spdk), and I attempt to migrate VM with
> 2 local storages. One local storage is a regular file, e.g. /tmp/c74.qcow2, and
> the other is a malloc bdev that spdk created. This malloc bdev will exported to
> VM via vhost-user-blk. When I execute following command:
>
> virsh migrate --live --persistent --unsafe --undefinesource --copy-storage-all \
> --p2p --auto-converge --verbose --desturi qemu+tcp://<uri>/system vm0
>
> The libvirt reports:
>
> qemu-2.12.1: error: internal error: unable to execute QEMU command \
> 'nbd-server-add': Cannot find device=drive-virtio-disk1 nor \
> node_name=drive-virtio-disk1
Please post your libvirt domain XML.
> Does it means that qemu with spdk on top of local storage don't support migration?
>
> QEMU: 2.12.1
> SPDK: 18.10
vhost-user-blk bypasses the QEMU block layer, so NBD storage migration
at the QEMU level will not work for the vhost-user-blk disk.
Stefan
1 year, 2 months
[libvirt] [PATCH v3] openvswitch: Add new port VLAN mode "dot1q-tunnel"
by luzhipeng＠uniudc.com
From: ZhiPeng Lu <luzhipeng(a)uniudc.com>
Signed-off-by: ZhiPeng Lu <luzhipeng(a)uniudc.com>
---
v1->v2:
1. Fix "make syntax-check" failure
v2->v3:
1. remove other_config when updating vlan
docs/formatnetwork.html.in | 17 +++++++++--------
docs/schemas/networkcommon.rng | 1 +
src/conf/netdev_vlan_conf.c | 2 +-
src/util/virnetdevopenvswitch.c | 7 +++++++
src/util/virnetdevvlan.h | 1 +
5 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in
index 363a72b..3c1ae62 100644
--- a/docs/formatnetwork.html.in
+++ b/docs/formatnetwork.html.in
@@ -688,16 +688,17 @@
</p>
<p>
For network connections using Open vSwitch it is also possible
- to configure 'native-tagged' and 'native-untagged' VLAN modes
+ to configure 'native-tagged' and 'native-untagged' and 'dot1q-tunnel'
+ VLAN modes.
<span class="since">Since 1.1.0.</span> This is done with the
- optional <code>nativeMode</code> attribute on
- the <code><tag></code> subelement: <code>nativeMode</code>
- may be set to 'tagged' or 'untagged'. The <code>id</code>
- attribute of the <code><tag></code> subelement
- containing <code>nativeMode</code> sets which VLAN is considered
- to be the "native" VLAN for this interface, and
+ optional <code>nativeMode</code> attribute on the
+ <code><tag></code> subelement: <code>nativeMode</code>
+ may be set to 'tagged' or 'untagged' or 'dot1q-tunnel'.
+ The <code>id</code> attribute of the <code><tag></code>
+ subelement containing <code>nativeMode</code> sets which VLAN is
+ considered to be the "native" VLAN for this interface, and
the <code>nativeMode</code> attribute determines whether or not
- traffic for that VLAN will be tagged.
+ traffic for that VLAN will be tagged or QinQ.
</p>
<p>
<code><vlan></code> elements can also be specified in
diff --git a/docs/schemas/networkcommon.rng b/docs/schemas/networkcommon.rng
index 2699555..11c48ff 100644
--- a/docs/schemas/networkcommon.rng
+++ b/docs/schemas/networkcommon.rng
@@ -223,6 +223,7 @@
<choice>
<value>tagged</value>
<value>untagged</value>
+ <value>dot1q-tunnel</value>
</choice>
</attribute>
</optional>
diff --git a/src/conf/netdev_vlan_conf.c b/src/conf/netdev_vlan_conf.c
index dff49c6..79710d9 100644
--- a/src/conf/netdev_vlan_conf.c
+++ b/src/conf/netdev_vlan_conf.c
@@ -29,7 +29,7 @@
#define VIR_FROM_THIS VIR_FROM_NONE
VIR_ENUM_IMPL(virNativeVlanMode, VIR_NATIVE_VLAN_MODE_LAST,
- "default", "tagged", "untagged")
+ "default", "tagged", "untagged", "dot1q-tunnel")
int
virNetDevVlanParse(xmlNodePtr node, xmlXPathContextPtr ctxt, virNetDevVlanPtr def)
diff --git a/src/util/virnetdevopenvswitch.c b/src/util/virnetdevopenvswitch.c
index 8fe06fd..9fec30b 100644
--- a/src/util/virnetdevopenvswitch.c
+++ b/src/util/virnetdevopenvswitch.c
@@ -91,6 +91,11 @@ virNetDevOpenvswitchConstructVlans(virCommandPtr cmd, virNetDevVlanPtr virtVlan)
virCommandAddArg(cmd, "vlan_mode=native-untagged");
virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag);
break;
+ case VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL:
+ virCommandAddArg(cmd, "vlan_mode=dot1q-tunnel");
+ virCommandAddArg(cmd, "other_config:qinq-ethtype=802.1q");
+ virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag);
+ break;
case VIR_NATIVE_VLAN_MODE_DEFAULT:
default:
break;
@@ -504,6 +509,8 @@ int virNetDevOpenvswitchUpdateVlan(const char *ifname,
"--", "--if-exists", "clear", "Port", ifname, "tag",
"--", "--if-exists", "clear", "Port", ifname, "trunk",
"--", "--if-exists", "clear", "Port", ifname, "vlan_mode",
+ "--", "--if-exists", "remove", "Port", ifname, "other_config",
+ "qinq-ethtype", NULL,
"--", "--if-exists", "set", "Port", ifname, NULL);
if (virNetDevOpenvswitchConstructVlans(cmd, virtVlan) < 0)
diff --git a/src/util/virnetdevvlan.h b/src/util/virnetdevvlan.h
index be85f59..0667f9d 100644
--- a/src/util/virnetdevvlan.h
+++ b/src/util/virnetdevvlan.h
@@ -29,6 +29,7 @@ typedef enum {
VIR_NATIVE_VLAN_MODE_DEFAULT = 0,
VIR_NATIVE_VLAN_MODE_TAGGED,
VIR_NATIVE_VLAN_MODE_UNTAGGED,
+ VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL,
VIR_NATIVE_VLAN_MODE_LAST
} virNativeVlanMode;
--
1.8.3.1
1 year, 2 months
[libvirt] [PATCH] Fix compile error for stable 1.2.9
by Yang hongyang
Seems a backport miss. An extra member is passed to struct
virLXCBasicMountInfo.
Signed-off-by: Yang hongyang <hongyang.yang(a)easystack.cn>
---
src/lxc/lxc_container.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/src/lxc/lxc_container.c b/src/lxc/lxc_container.c
index 28dabec..1c65fa9 100644
--- a/src/lxc/lxc_container.c
+++ b/src/lxc/lxc_container.c
@@ -760,7 +760,7 @@ typedef struct {
static const virLXCBasicMountInfo lxcBasicMounts[] = {
{ "proc", "/proc", "proc", MS_NOSUID|MS_NOEXEC|MS_NODEV, false, false },
- { "/proc/sys", "/proc/sys", NULL, MS_BIND|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false, false },
+ { "/proc/sys", "/proc/sys", NULL, MS_BIND|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false },
{ "sysfs", "/sys", "sysfs", MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false },
{ "securityfs", "/sys/kernel/security", "securityfs", MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, true, true },
#if WITH_SELINUX
--
1.7.1
1 year, 2 months
[libvirt] Supporting vhost-net and macvtap in libvirt for QEMU
by Anthony Liguori
Disclaimer: I am neither an SR-IOV nor a vhost-net expert, but I've CC'd
people that are who can throw tomatoes at me for getting bits wrong :-)
I wanted to start a discussion about supporting vhost-net in libvirt.
vhost-net has not yet been merged into qemu but I expect it will be soon
so it's a good time to start this discussion.
There are two modes worth supporting for vhost-net in libvirt. The
first mode is where vhost-net backs to a tun/tap device. This is
behaves in very much the same way that -net tap behaves in qemu today.
Basically, the difference is that the virtio backend is in the kernel
instead of in qemu so there should be some performance improvement.
Current, libvirt invokes qemu with -net tap,fd=X where X is an already
open fd to a tun/tap device. I suspect that after we merge vhost-net,
libvirt could support vhost-net in this mode by just doing -net
vhost,fd=X. I think the only real question for libvirt is whether to
provide a user visible switch to use vhost or to just always use vhost
when it's available and it makes sense. Personally, I think the later
makes sense.
The more interesting invocation of vhost-net though is one where the
vhost-net device backs directly to a physical network card. In this
mode, vhost should get considerably better performance than the current
implementation. I don't know the syntax yet, but I think it's
reasonable to assume that it will look something like -net
tap,dev=eth0. The effect will be that eth0 is dedicated to the guest.
On most modern systems, there is a small number of network devices so
this model is not all that useful except when dealing with SR-IOV
adapters. In that case, each physical device can be exposed as many
virtual devices (VFs). There are a few restrictions here though. The
biggest is that currently, you can only change the number of VFs by
reloading a kernel module so it's really a parameter that must be set at
startup time.
I think there are a few ways libvirt could support vhost-net in this
second mode. The simplest would be to introduce a new tag similar to
<source network='br0'>. In fact, if you probed the device type for the
network parameter, you could probably do something like <source
network='eth0'> and have it Just Work.
Another model would be to have libvirt see an SR-IOV adapter as a
network pool whereas it handled all of the VF management. Considering
how inflexible SR-IOV is today, I'm not sure whether this is the best model.
Has anyone put any more thought into this problem or how this should be
modeled in libvirt? Michael, could you share your current thinking for
-net syntax?
--
Regards,
Anthony Liguori
1 year, 2 months
[PATCH-for-5.2] target/mips: Deprecate nanoMIPS ISA
by Philippe Mathieu-Daudé
The nanoMIPS ISA has been announced in 2018 for various projects:
GCC: https://gcc.gnu.org/legacy-ml/gcc/2018-05/msg00012.html
Linux: https://lwn.net/Articles/753605/
QEMU: https://www.mail-archive.com/qemu-devel@nongnu.org/msg530721.html
Unfortunately the links referenced doesn't work anymore (www.mips.com).
>From this Wayback machine link [1] we can get to a working place to
download a toolchain (a more recent release than the one referenced
in the announcement mails):
http://codescape.mips.com/components/toolchain/nanomips/2018.04-02/downlo...
The toolchain page mention LLVM but simply links http://llvm.org/
where there is no reference on nanoMIPS.
The only reference in the GCC mailing list, is the nanoMIPS
announcement: https://gcc.gnu.org/pipermail/gcc/2018-May.txt
The developer who authored the announcements have been emailed [2]
to ask for more information but all their emails are now bouncing:
- Your message to Stefan.Markovic(a)mips.com couldn't be delivered.
- Your message to smarkovic(a)wavecomp.com couldn't be delivered.
- Couldn't deliver the message to the following recipients:
Robert.Suchanek(a)mips.com, matthew.fortune(a)mips.com,
marcin.nowakowski(a)mips.com
Our deprecation policy do not allow feature removal before 2 release,
therefore declare the nanoMIPS ISA code deprecated as of QEMU 5.2.
This gives time to developers to update the QEMU community, or
interested parties to step in to maintain this code.
[1] https://web.archive.org/web/20180904044530/https://www.mips.com/develop/t...
[2] https://www.mail-archive.com/qemu-devel@nongnu.org/msg756392.html
Signed-off-by: Philippe Mathieu-Daudé <f4bug(a)amsat.org>
---
docs/system/deprecated.rst | 23 +++++++++++++++++++++++
MAINTAINERS | 6 +++++-
2 files changed, 28 insertions(+), 1 deletion(-)
diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst
index 32a0e620dbb..a26af200c73 100644
--- a/docs/system/deprecated.rst
+++ b/docs/system/deprecated.rst
@@ -310,6 +310,13 @@ to build binaries for it.
``Icelake-Client`` CPU Models are deprecated. Use ``Icelake-Server`` CPU
Models instead.
+MIPS ``I7200`` CPU Model (since 5.2)
+''''''''''''''''''''''''''''''''''''
+
+The ``I7200`` guest CPU relies on the nanoMIPS ISA, which is deprecated
+(the ISA has never been upstreamed to a compiler toolchain). Therefore
+this CPU is also deprecated.
+
System emulator devices
-----------------------
@@ -413,6 +420,13 @@ The ``ppc64abi32`` architecture has a number of issues which regularly
trip up our CI testing and is suspected to be quite broken. For that
reason the maintainers strongly suspect no one actually uses it.
+MIPS ``I7200`` CPU (since 5.2)
+''''''''''''''''''''''''''''''
+
+The ``I7200`` guest CPU relies on the nanoMIPS ISA, which is deprecated
+(the ISA has never been upstreamed to a compiler toolchain). Therefore
+this CPU is also deprecated.
+
Related binaries
----------------
@@ -477,6 +491,15 @@ versions, aliases will point to newer CPU model versions
depending on the machine type, so management software must
resolve CPU model aliases before starting a virtual machine.
+Guest Emulator ISAs
+-------------------
+
+nanoMIPS ISA
+''''''''''''
+
+The ``nanoMIPS`` ISA has never been upstreamed to any compiler toolchain.
+As it is hard to generate binaries for it, declare it deprecated.
+
Recently removed features
=========================
diff --git a/MAINTAINERS b/MAINTAINERS
index 2c22bbca5ac..4f701012eea 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -227,7 +227,7 @@ R: Aleksandar Rikalo <aleksandar.rikalo(a)syrmia.com>
S: Odd Fixes
F: target/mips/
F: default-configs/*mips*
-F: disas/*mips*
+F: disas/mips.c
F: docs/system/cpu-models-mips.rst.inc
F: hw/intc/mips_gic.c
F: hw/mips/
@@ -240,6 +240,10 @@ F: include/hw/timer/mips_gictimer.h
F: tests/tcg/mips/
K: ^Subject:.*(?i)mips
+MIPS TCG CPUs (nanoMIPS ISA)
+S: Orphan
+F: disas/nanomips.*
+
Moxie TCG CPUs
M: Anthony Green <green(a)moxielogic.com>
S: Maintained
--
2.26.2
3 years, 9 months
[PATCH] remote: Add libvirtd dependency to virt-guest-shutdown.target
by Jim Fehlig
When restarting libvirt services and sockets *and* libvirt-guests.service
is running, the latter will sometimes hang when trying to connect to
libvirtd. Even though libvirt-guests has 'Wants=libvirtd.service' and
'After=libvirtd.service', we can see via journalctl that it is not
shutdown before libvirtd when executing something like
systemctl try-restart libvirtd.service libvirtd.socket \
libvirtd-ro.socket virtlockd.service virtlockd.socket \
virtlogd.service virtlogd.socket virt-guest-shutdown.target
Oct 28 15:53:31 systemd[1]: Stopping Virtualization daemon...
Oct 28 15:53:31 systemd[1]: libvirtd.service: Succeeded.
Oct 28 15:53:31 systemd[1]: Stopped Virtualization daemon.
Oct 28 15:53:31 systemd[1]: libvirtd-admin.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Libvirt admin socket.
Oct 28 15:53:31 systemd[1]: Stopping Libvirt admin socket.
Oct 28 15:53:31 systemd[1]: libvirtd-ro.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Libvirt local read-only socket.
Oct 28 15:53:31 systemd[1]: Stopping Libvirt local read-only socket.
Oct 28 15:53:31 systemd[1]: libvirtd.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Libvirt local socket.
Oct 28 15:53:31 systemd[1]: Stopping Libvirt local socket.
Oct 28 15:53:31 systemd[1]: Listening on Libvirt local socket.
Oct 28 15:53:31 systemd[1]: Listening on Libvirt admin socket.
Oct 28 15:53:31 systemd[1]: Listening on Libvirt local read-only socket.
Oct 28 15:53:31 systemd[1]: virtlockd.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Virtual machine lock manager socket.
Oct 28 15:53:31 systemd[1]: Stopping Virtual machine lock manager socket.
Oct 28 15:53:31 systemd[1]: Listening on Virtual machine lock manager socket.
Oct 28 15:53:31 systemd[1]: virtlogd.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Virtual machine log manager socket.
Oct 28 15:53:31 systemd[1]: Stopping Virtual machine log manager socket.
Oct 28 15:53:31 systemd[1]: Listening on Virtual machine log manager socket.
Oct 28 15:53:31 systemd[1]: Stopping Suspend/Resume Running libvirt Guests...
In this case, the try-restart command hung and libvirt-guests was stuck
trying to connect to libvirtd. In the following case, the try-restart
worked since libvirtd was started again before libvirt-guests was stopped!
Oct 28 15:19:02 systemd[1]: Stopping Virtualization daemon...
Oct 28 15:19:02 systemd[1]: Stopped Virtualization daemon.
Oct 28 15:19:02 systemd[1]: Closed Libvirt admin socket.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt admin socket.
Oct 28 15:19:02 systemd[1]: Closed Virtual machine lock manager socket.
Oct 28 15:19:02 systemd[1]: Stopping Virtual machine lock manager socket.
Oct 28 15:19:02 systemd[1]: Listening on Virtual machine lock manager socket.
Oct 28 15:19:02 systemd[1]: Closed Libvirt local read-only socket.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt local read-only socket.
Oct 28 15:19:02 systemd[1]: Closed Libvirt local socket.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt local socket.
Oct 28 15:19:02 systemd[1]: Listening on Libvirt local socket.
Oct 28 15:19:02 systemd[1]: Listening on Libvirt admin socket.
Oct 28 15:19:02 systemd[1]: Listening on Libvirt local read-only socket.
Oct 28 15:19:02 systemd[1]: Closed Virtual machine log manager socket.
Oct 28 15:19:02 systemd[1]: Stopping Virtual machine log manager socket.
Oct 28 15:19:02 systemd[1]: Listening on Virtual machine log manager socket.
Oct 28 15:19:02 systemd[1]: Starting Virtualization daemon...
Oct 28 15:19:02 systemd[1]: Stopping Suspend/Resume Running libvirt Guests...
Oct 28 15:19:02 systemd[1]: Started Virtualization daemon.
Oct 28 15:19:02 libvirt-guests.sh[4912]: Running guests on default URI: no running guests.
Oct 28 15:19:02 systemd[1]: Stopped Suspend/Resume Running libvirt Guests.
Oct 28 15:19:02 systemd[1]: Stopped target Libvirt guests shutdown.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt guests shutdown.
Oct 28 15:19:02 systemd[1]: Reached target Libvirt guests shutdown.
Oct 28 15:19:02 systemd[1]: Starting Suspend/Resume Running libvirt Guests...
Oct 28 15:19:02 systemd[1]: Started Suspend/Resume Running libvirt Guests.
Adding 'Requires=libvirtd.service' to virt-guest-shutdown.target results
in expected behavior
Oct 28 15:40:00 systemd[1]: Stopping Suspend/Resume Running libvirt Guests...
Oct 28 15:40:00 libvirt-guests.sh[5245]: Running guests on default URI: no running guests.
Oct 28 15:40:00 systemd[1]: Stopped Suspend/Resume Running libvirt Guests.
Oct 28 15:40:00 systemd[1]: Stopped target Libvirt guests shutdown.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt guests shutdown.
Oct 28 15:40:00 systemd[1]: Stopping Virtualization daemon...
Oct 28 15:40:00 systemd[1]: Stopped Virtualization daemon.
Oct 28 15:40:00 systemd[1]: Closed Virtual machine log manager socket.
Oct 28 15:40:00 systemd[1]: Stopping Virtual machine log manager socket.
Oct 28 15:40:00 systemd[1]: Listening on Virtual machine log manager socket.
Oct 28 15:40:00 systemd[1]: Closed Libvirt admin socket.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt admin socket.
Oct 28 15:40:00 systemd[1]: Closed Libvirt local read-only socket.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt local read-only socket.
Oct 28 15:40:00 systemd[1]: Closed Libvirt local socket.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt local socket.
Oct 28 15:40:00 systemd[1]: Listening on Libvirt local socket.
Oct 28 15:40:00 systemd[1]: Listening on Libvirt admin socket.
Oct 28 15:40:00 systemd[1]: Listening on Libvirt local read-only socket.
Oct 28 15:40:00 systemd[1]: Closed Virtual machine lock manager socket.
Oct 28 15:40:00 systemd[1]: Stopping Virtual machine lock manager socket.
Oct 28 15:40:00 systemd[1]: Listening on Virtual machine lock manager socket.
Oct 28 15:40:00 systemd[1]: Starting Virtualization daemon...
Oct 28 15:40:00 systemd[1]: Started Virtualization daemon.
Oct 28 15:40:00 systemd[1]: Reached target Libvirt guests shutdown.
Oct 28 15:40:00 systemd[1]: Starting Suspend/Resume Running libvirt Guests...
Oct 28 15:40:00 systemd[1]: Started Suspend/Resume Running libvirt Guests.
Signed-off-by: Jim Fehlig <jfehlig(a)suse.com>
---
I asked about this on the dev list but it is probably best to send a
patch for discussion instead.
https://www.redhat.com/archives/libvir-list/2020-October/msg01492.html
src/remote/virt-guest-shutdown.target | 1 +
1 file changed, 1 insertion(+)
diff --git a/src/remote/virt-guest-shutdown.target b/src/remote/virt-guest-shutdown.target
index 25d4aaa267..e2efa3e63a 100644
--- a/src/remote/virt-guest-shutdown.target
+++ b/src/remote/virt-guest-shutdown.target
@@ -1,3 +1,4 @@
[Unit]
Description=Libvirt guests shutdown
+Requires=libvirtd.service
Documentation=https://libvirt.org
--
2.28.0
3 years, 11 months
[PATCH v4 0/7] migration/dirtyrate: Introduce APIs for getting domain memory dirty rate
by Hao Wang
V3 -> V4:
define flags to unsigned int
fix some compile warnings
V2 -> V3:
reorganize patchset to fix compile warning
V1 -> V2:
replace QEMU_JOB_ASYNC with QEMU_JOB_QUERY
Sometimes domain's memory dirty rate is expected by user in order to
decide whether it's proper to be migrated out or not.
We have already completed the QEMU part of the capability:
https://patchew.org/QEMU/1600237327-33618-1-git-send-email-zhengchuan@hua...
And this serial of patches introduce the corresponding LIBVIRT part --
DomainGetDirtyRateInfo API and corresponding virsh api -- "getdirtyrate".
instructions:
bash# virsh getdirtyrate --help
NAME
getdirtyrate - Get a vm's memory dirty rate
SYNOPSIS
getdirtyrate <domain> [--seconds <number>] [--calculate] [--query]
DESCRIPTION
Get memory dirty rate of a domain in order to decide whether it's proper to be migrated out or not.
OPTIONS
[--domain] <string> domain name, id or uuid
--seconds <number> calculate memory dirty rate within specified seconds, a valid range of values is [1, 60], and would default to 1s.
--calculate calculate dirty rate only, can be used together with --query, either or both is expected, otherwise would default to both.
--query query dirty rate only, can be used together with --calculate, either or both is expected, otherwise would default to both.
example:
bash# virsh getdirtyrate --calculate --query --domain vm0 --seconds 1
status: measured
startTime: 820148
calcTime: 1 s
dirtyRate: 6 MB/s
*** BLURB HERE ***
Hao Wang (7):
migration/dirtyrate: Introduce virDomainDirtyRateInfo structure
migration/dirtyrate: set up framwork of domainGetDirtyRateInfo API
migration/dirtyrate: Implement qemuDomainCalculateDirtyRate
migration/dirtyrate: Implement qemuDomainQueryDirtyRate
migration/dirtyrate: Implement qemuMonitorJSONExtractDirtyRateInfo
migration/dirtyrate: Implement qemuDomainGetDirtyRateInfo
migration/dirtyrate: Introduce getdirtyrate virsh api
include/libvirt/libvirt-domain.h | 57 ++++++++++++++++
src/driver-hypervisor.h | 7 ++
src/libvirt-domain.c | 46 +++++++++++++
src/libvirt_public.syms | 5 ++
src/qemu/qemu_driver.c | 68 +++++++++++++++++++
src/qemu/qemu_migration.c | 59 ++++++++++++++++
src/qemu/qemu_migration.h | 10 +++
src/qemu/qemu_monitor.c | 24 +++++++
src/qemu/qemu_monitor.h | 8 +++
src/qemu/qemu_monitor_json.c | 97 ++++++++++++++++++++++++++
src/qemu/qemu_monitor_json.h | 8 +++
src/remote/remote_driver.c | 1 +
src/remote/remote_protocol.x | 21 +++++-
tools/virsh-domain.c | 112 +++++++++++++++++++++++++++++++
14 files changed, 522 insertions(+), 1 deletion(-)
--
2.23.0
3 years, 11 months
Adding an nftables backend in addition to iptables?
by Aljoscha Lautenbach
Hi!
First of all, thanks for your work on libvirt, it is highly appreciated!
When I wanted to create a new VM using virt-manager on my Debian
Testing machine yesterday, I ran into the following problem:
~# virsh net-list --all
Name State Autostart Persistent
----------------------------------------------
default inactive yes yes
~# virsh net-start default
error: Failed to start network default
error: internal error: Failed to apply firewall rules
/usr/sbin/iptables --table filter --list-rules: iptables v1.8.6
(nf_tables): table `filter' is incompatible, use 'nft' tool.
It turns out the Debian package for iptables includes two versions of
iptables: iptables-nft and iptables-legacy. It looks like iptables-nft
has been the default in Debian for a while, which led to the error
above.
After setting iptables-legacy to be the default and restarting the
libvirtd service, everything worked as expected.
But it did make me wonder, are there any plans to add a backend for nftables?
Thanks,
Aljoscha
3 years, 11 months
