April 2019 - Devel - Libvirt List Archives

[libvirt] [PATCH] qemu.conf: Make nvram list obsolete

by Michal Privoznik

Now that libvirt has firmware auto selection feature the nvram config knob is more or less obsolete. It still makes sense in cases where distro users are using does not provide FW descriptor files, therefore I'm not removing it. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- src/qemu/qemu.conf | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/qemu/qemu.conf b/src/qemu/qemu.conf index 334b4cd4ee..ecde8f0181 100644 --- a/src/qemu/qemu.conf +++ b/src/qemu/qemu.conf @@ -740,6 +740,8 @@ # Location of master nvram file # +# This is now obsoleted by firmware auto selection feature. +# Prefer that before this. # When a domain is configured to use UEFI instead of standard # BIOS it may use a separate storage for UEFI variables. If # that's the case libvirt creates the variable store per domain -- 2.21.0

5 years, 8 months

2
1
0 / 0

[libvirt] [PATCH v2 00/11] conf: partial net model enum conversion

by Cole Robinson

v1 here: https://www.redhat.com/archives/libvir-list/2019-January/msg00763.html Changes since v1: - patch #7, case insensitive model input comparison - Add xml2xml testing - compile tested on freebsd12.0 This series partially converts the net->model value from a string to an enum. We wrap the existing ->model string in accessor functions, rename it to ->modelstr, add a ->model enum, and convert internal driver usage bit by bit. At the end, all driver code that is acting on specific network model values is comparing against an enum, not a string. This is only partial because of xen/libxl/xm and qemu drivers, which if they don't know anything particular about the model string will just place it on the qemu command line/xen config and see what happens. So basically if I were to pass in <model type='idontexist'/> qemu would turn that into -device idontexist,... That behavior is untouched by this series, as fully unwinding that will take some more work: * Figuring out all reasonable qemu + xen values that could actually result in a working VM config, and adding them to the enum * Figuring out a long term plan for disabling passthrough entirely. There's some discussion in the v1 thread about this. Some caveats: * vz driver is not compile tested. What's the sdk magic to actually get this building? * net model enum lookup is done case insensitive. this is to maintain the behavior of the vmx and virtualbox drivers, but it's different than all our other enum usage. Cole Robinson (11): tests: Add several net model passthrough tests conf: net: Add wrapper functions for <model> value conf: net: Rename 'model' to 'modelstr' conf: net: Add model enum, and netfront value vz: convert to net model enum bhyve: convert to net model enum qemu: Partially convert to net model enum conf: Make net model enum compare case insensitive vmx: convert to net model enum vbox: Convert to net enum model conf: Add VIR_DOMAIN_DEF_FEATURE_NET_MODEL_STRING src/bhyve/bhyve_command.c | 15 +-- src/bhyve/bhyve_parse_command.c | 10 +- src/conf/domain_conf.c | 111 ++++++++++++++---- src/conf/domain_conf.h | 35 +++++- src/libvirt_private.syms | 4 + src/libxl/libxl_conf.c | 8 +- src/libxl/libxl_domain.c | 1 + src/qemu/qemu_command.c | 13 +- src/qemu/qemu_domain.c | 32 +++-- src/qemu/qemu_domain_address.c | 13 +- src/qemu/qemu_driver.c | 14 ++- src/qemu/qemu_hotplug.c | 15 ++- src/qemu/qemu_parse_command.c | 5 +- src/security/virt-aa-helper.c | 3 +- src/vbox/vbox_common.c | 29 ++--- src/vmx/vmx.c | 55 ++++----- src/vz/vz_driver.c | 7 +- src/vz/vz_sdk.c | 17 ++- src/xenconfig/xen_common.c | 31 ++--- src/xenconfig/xen_sxpr.c | 30 ++--- tests/qemuxml2argvdata/net-many-models.args | 39 ++++++ tests/qemuxml2argvdata/net-many-models.xml | 38 ++++++ tests/qemuxml2argvtest.c | 1 + tests/qemuxml2xmloutdata/net-many-models.xml | 53 +++++++++ tests/qemuxml2xmltest.c | 1 + tests/xlconfigdata/test-net-fakemodel.cfg | 24 ++++ tests/xlconfigdata/test-net-fakemodel.xml | 39 ++++++ tests/xlconfigtest.c | 1 + .../test-paravirt-net-fakemodel.cfg | 13 ++ .../test-paravirt-net-fakemodel.xml | 40 +++++++ .../test-paravirt-net-modelstr.cfg | 13 ++ tests/xmconfigtest.c | 1 + .../xml2sexpr-fv-net-many-models.sexpr | 1 + .../xml2sexpr-fv-net-many-models.xml | 43 +++++++ tests/xml2sexprtest.c | 1 + 35 files changed, 586 insertions(+), 170 deletions(-) create mode 100644 tests/qemuxml2argvdata/net-many-models.args create mode 100644 tests/qemuxml2argvdata/net-many-models.xml create mode 100644 tests/qemuxml2xmloutdata/net-many-models.xml create mode 100644 tests/xlconfigdata/test-net-fakemodel.cfg create mode 100644 tests/xlconfigdata/test-net-fakemodel.xml create mode 100644 tests/xmconfigdata/test-paravirt-net-fakemodel.cfg create mode 100644 tests/xmconfigdata/test-paravirt-net-fakemodel.xml create mode 100644 tests/xmconfigdata/test-paravirt-net-modelstr.cfg create mode 100644 tests/xml2sexprdata/xml2sexpr-fv-net-many-models.sexpr create mode 100644 tests/xml2sexprdata/xml2sexpr-fv-net-many-models.xml -- 2.20.1

5 years, 8 months

3
24
0 / 0

[libvirt] [PATCH v3 0/4] Don't pm suspend guest if it's unable to wake up

by Michal Privoznik

This is v3 of: https://www.redhat.com/archives/libvir-list/2019-April/msg00690.html I've taken Daniel's patches and reworked them. Diff to v2: - Patches 1-2/3 are split into three patches - Capability is checked for when querying other capabilities - Fixed a small security issue in 3/3 Daniel Henrique Barboza (2): qemu_capabilities: Add QEMU_CAPS_QUERY_CURRENT_MACHINE qemuDomainPMSuspendForDuration: check for QEMU_CAPS_PM_WAKEUP_SUPPORT Michal Prívozník (2): qemu_monitor: Introduce handler for 'query-current-machine' command qemu_capabilities: Introduce QEMU_CAPS_PM_WAKEUP_SUPPORT src/qemu/qemu_capabilities.c | 26 ++++++++++ src/qemu/qemu_capabilities.h | 4 ++ src/qemu/qemu_driver.c | 21 ++++++++ src/qemu/qemu_monitor.c | 10 ++++ src/qemu/qemu_monitor.h | 9 ++++ src/qemu/qemu_monitor_json.c | 50 +++++++++++++++++++ src/qemu/qemu_monitor_json.h | 5 ++ .../caps_4.0.0.riscv32.replies | 11 ++++ .../caps_4.0.0.riscv32.xml | 2 + .../caps_4.0.0.riscv64.replies | 11 ++++ .../caps_4.0.0.riscv64.xml | 2 + .../caps_4.0.0.x86_64.replies | 11 ++++ .../caps_4.0.0.x86_64.xml | 2 + 13 files changed, 164 insertions(+) -- 2.21.0

5 years, 8 months

3
14
0 / 0

[libvirt] [PATCH v2 0/3] Add 'label' arg to VIR_ENUM_IMPL

by Cole Robinson

5 years, 8 months

4
9
0 / 0

[libvirt] On the content of 'nvram' section in /etc/libvirt/qemu.conf

by Kashyap Chamarthy

I learnt from Dan Berrangé that the 'nvram' section in `/etc/libvirt/qemu.conf` will now go away in light of all the work done in QEMU ('firmware.json', et al) and libvirt (the firmware auto-selection). But for my own education, can anyone confirm that the current content of 'nvram' is out of date in terms of mapping of OVMF binaries to their corresponding variable store ("VARS") files? Let's see what I mean. On my Fedora 29 box, in `/etc/libvirt/qemu.conf`, I see the following mapping of OVMF binaries to their correspoindg "VARS" file under the 'nvram' section: #nvram = [ # "/usr/share/OVMF/OVMF_CODE.fd:/usr/share/OVMF/OVMF_VARS.fd", # "/usr/share/OVMF/OVMF_CODE.secboot.fd:/usr/share/OVMF/OVMF_VARS.fd", # "/usr/share/AAVMF/AAVMF_CODE.fd:/usr/share/AAVMF/AAVMF_VARS.fd", # "/usr/share/AAVMF/AAVMF32_CODE.fd:/usr/share/AAVMF/AAVMF32_VARS.fd" #] Now let's enumerate the content of 'edk2-ovmf' package: $> rpm -ql edk2-ovmf /usr/share/OVMF /usr/share/OVMF/OVMF_CODE.fd /usr/share/OVMF/OVMF_CODE.secboot.fd /usr/share/OVMF/OVMF_VARS.fd /usr/share/OVMF/OVMF_VARS.secboot.fd /usr/share/OVMF/UefiShell.iso /usr/share/doc/edk2-ovmf /usr/share/doc/edk2-ovmf/README /usr/share/doc/edk2-ovmf/ovmf-whitepaper-c770f8c.txt /usr/share/edk2 /usr/share/edk2/ovmf /usr/share/edk2/ovmf/EnrollDefaultKeys.efi /usr/share/edk2/ovmf/OVMF_CODE.fd /usr/share/edk2/ovmf/OVMF_CODE.secboot.fd /usr/share/edk2/ovmf/OVMF_VARS.fd /usr/share/edk2/ovmf/OVMF_VARS.secboot.fd /usr/share/edk2/ovmf/Shell.efi /usr/share/edk2/ovmf/UefiShell.iso /usr/share/licenses/edk2-ovmf /usr/share/licenses/edk2-ovmf/LICENSE.openssl /usr/share/licenses/edk2-ovmf/License.txt There is the /usr/share/edk2/ovmf/OVMF_VARS.secboot.fd file (which comes with the default UEFI keys enrolled). So, the mapping of OVMF binary to VARS file in the earlier mentioned 'nvram' section should have been: /usr/share/OVMF/OVMF_CODE.secboot.fd:/usr/share/edk2/ovmf/OVMF_VARS.secboot.fd Yes? -- /kashyap

5 years, 8 months

2
2
0 / 0

[libvirt] Virtual machine

by achamusse＠isutc.transcom.co.mz

My Ubuntu16.04.5 server is installed qemo-kvm and libvirt-manager but virt-manager is not starting. consequently when I install vncserver the keyboard does not work on the virtual machine. But in ubuntu 14.04 it works perfectly. can my help ?? ERRO when try run : virt-manager Could not connect: Connection refused Failed to connect to Mir: Failed to connect to server socket: No such file or directory Unable to init server: Could not connect: Connection refused (virt-manager:7676): Gtk-CRITICAL **: gtk_settings_get_for_screen: assertion 'GDK_IS_SCREEN (screen)' failed Melhores Cumprimentos Armando Chamusse Departamento de Operações e Infraestruturas Prolongamento Av. Kim Il Sung, Edf. D1, C.P. 2088 - Maputo - Moçambique Telefone: (+258) 21 48 87 92/5 Celular: (+258) 82 30 62 620 |82 31 26 200 | 84 31 29 246 | 87 16 28 785 <http://www.facebook.com/isutc> www.facebook.com/isutc <http://www.transcom.co.mz/isutc/> www.transcom.co.mz/isutc

5 years, 8 months

2
1
0 / 0

[libvirt] [PATCH] qemu: Simplify interface handling in qemuConnectDomainXMLToNative()

by Michal Privoznik

Firstly, VIR_STRDUP() accepts NULL, so there is no need to check if the string we want to duplicate is not-NULL. Secondly, virDomainNetSetModelString() also accepts NULL. Thirdly, we have VIR_AUTOFREE(). Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- src/qemu/qemu_driver.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 0fb90c4049..c443c881d5 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -7411,12 +7411,11 @@ static char *qemuConnectDomainXMLToNative(virConnectPtr conn, for (i = 0; i < vm->def->nnets; i++) { virDomainNetDefPtr net = vm->def->nets[i]; unsigned int bootIndex = net->info.bootIndex; - char *model = NULL; + VIR_AUTOFREE(char *) model = NULL; virMacAddr mac = net->mac; char *script = net->script; - if (virDomainNetGetModelString(net) && - VIR_STRDUP(model, virDomainNetGetModelString(net)) < 0) + if (VIR_STRDUP(model, virDomainNetGetModelString(net)) < 0) goto cleanup; net->script = NULL; @@ -7428,11 +7427,8 @@ static char *qemuConnectDomainXMLToNative(virConnectPtr conn, net->mac = mac; net->script = script; - if (model && virDomainNetSetModelString(net, model) < 0) { - VIR_FREE(model); + if (virDomainNetSetModelString(net, model) < 0) goto cleanup; - } - VIR_FREE(model); } if (!(cmd = qemuProcessCreatePretendCmd(driver, vm, NULL, -- 2.21.0

5 years, 8 months

2
1
0 / 0

[libvirt] [PATCH] docs: index.html.in: Deduplicate the link of QEMU and KVM

by Han Han

Because the page of QEMU and KVM use the same doc drvqemu.html, merge the into one and name it as QEMU/KVM. Signed-off-by: Han Han <hhan(a)redhat.com> --- docs/index.html.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/index.html.in b/docs/index.html.in index f593445d06..97a4e9eef7 100644 --- a/docs/index.html.in +++ b/docs/index.html.in @@ -31,8 +31,8 @@ <li>is a toolkit to manage <a href="platforms.html">virtualization platforms</a></li> <li>is accessible from C, Python, Perl, Java and more</li> <li>is licensed under open source licenses</li> - <li>supports <a href="drvqemu.html">KVM</a>, - <a href="drvqemu.html">QEMU</a>, <a href="drvxen.html">Xen</a>, + <li>supports <a href="drvqemu.html">QEMU/KVM</a>, + <a href="drvxen.html">Xen</a>, <a href="drvvirtuozzo.html">Virtuozzo</a>, <a href="drvesx.html">VMWare ESX</a>, <a href="drvlxc.html">LXC</a>, -- 2.20.1

5 years, 8 months

3
2
0 / 0

[libvirt] [PATCH] qemu: Fix uninitialized variable

by Andrea Bolognani

It has made Clang very unhappy ever since 6bf7c6769925. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- Pushed under the build breaker rule. src/qemu/qemu_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index aac50475ee..0fb90c4049 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -7411,7 +7411,7 @@ static char *qemuConnectDomainXMLToNative(virConnectPtr conn, for (i = 0; i < vm->def->nnets; i++) { virDomainNetDefPtr net = vm->def->nets[i]; unsigned int bootIndex = net->info.bootIndex; - char *model; + char *model = NULL; virMacAddr mac = net->mac; char *script = net->script; -- 2.20.1

5 years, 8 months

1
0
0 / 0

[libvirt] [PATCH 0/2] rpc: client: stream bugfix and improvement

by Nikolay Shirokovskiy

Nikolay Shirokovskiy (2): rpc: client: fix race on stream error and stream creation rpc: client: stream: notify streams of closing connection src/rpc/virnetclient.c | 13 ++++++++++--- src/rpc/virnetclientstream.c | 30 ++++++++++++++++++++++++++++-- src/rpc/virnetclientstream.h | 2 ++ 3 files changed, 40 insertions(+), 5 deletions(-) -- 1.8.3.1

5 years, 8 months

2
6
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Devel April 2019