July 2018 - Devel - libvirt List Archives

[libvirt] [PATCH 0/5] Couple of LXC fixes & improvements
by Michal Privoznik 26 Jul '18

26 Jul '18

*** BLURB HERE *** Michal Prívozník (5): lxc: Refresh capabilities on virConnectGetCapabilities lxc: Report supported huge pages lxc: Enable under valgrind again lxc: Don't leak @veths in virLXCProcessStart lxc: Don't mangle @cfg refs in virLXCProcessBuildControllerCmd src/lxc/lxc_conf.c | 4 ++++ src/lxc/lxc_driver.c | 13 +------------ src/lxc/lxc_process.c | 15 +++++++++------ 3 files changed, 14 insertions(+), 18 deletions(-) -- 2.16.4

2 10

[libvirt] [PATCH] networkGetDHCPLeases: Don't always report error if unable to read leases file
by Michal Privoznik 26 Jul '18

26 Jul '18

https://bugzilla.redhat.com/show_bug.cgi?id=1600468 If we are unable to read leases file (no matter what the reason is), we return 0 - just like if there were no leases. However, because we use virFileReadAll() an error is printed into the log. Note that not all networks have leases file - only those for which we start dnsmasq. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- src/network/bridge_driver.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index a7826e9b63..5839021caf 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -4235,13 +4235,20 @@ networkGetDHCPLeases(virNetworkPtr net, custom_lease_file = networkDnsmasqLeaseFileNameCustom(driver, def->bridge); /* Read entire contents */ - if ((custom_lease_file_len = virFileReadAll(custom_lease_file, - VIR_NETWORK_DHCP_LEASE_FILE_SIZE_MAX, - &lease_entries)) < 0) { - /* Even though src/network/leaseshelper.c guarantees the existence of - * leases file (even if no leases are present), and the control reaches - * here, instead of reporting error, return 0 leases */ - rv = 0; + if ((custom_lease_file_len = virFileReadAllQuiet(custom_lease_file, + VIR_NETWORK_DHCP_LEASE_FILE_SIZE_MAX, + &lease_entries)) < 0) { + /* Not all networks are guaranteed to have leases file. + * Only those which run dnsmasq. Therefore, if we failed + * to read the leases file, don't report error. Return 0 + * leases instead. */ + if (errno != ENOENT) { + virReportSystemError(errno, + _("Unable to read leases file: %s"), + custom_lease_file); + } else { + rv = 0; + } goto error; } -- 2.16.4

2 2

[libvirt] [PATCH v1 00/40] use GNU C's cleanup attribute in src/util (batch II)
by Sukrit Bhatnagar 26 Jul '18

26 Jul '18

This second series of patches also modifies a few files in src/util to use VIR_AUTOFREE and VIR_AUTOPTR for automatic freeing of memory and get rid of some VIR_FREE macro invocations and *Free function calls. The argument type of virCgroupFree is changed from virCgroupPtr * to virCgroupPtr. Sukrit Bhatnagar (40): util: cgroup: modify virCgroupFree to take virCgroupPtr util: error: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC util: buffer: typedef and Free helper for struct _virBufferEscapePair util: buffer: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC util: buffer: use VIR_AUTOFREE instead of VIR_FREE for scalar types util: buffer: use VIR_AUTOPTR for aggregate types util: hash: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC util: cgroup: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC util: cgroup: use VIR_AUTOFREE instead of VIR_FREE for scalar types util: cgroup: use VIR_AUTOPTR for aggregate types util: mdev: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC util: mdev: use VIR_AUTOFREE instead of VIR_FREE for scalar types util: mdev: use VIR_AUTOPTR for aggregate types util: firewall: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC util: firewall: use VIR_AUTOFREE instead of VIR_FREE for scalar types util: firewall: use VIR_AUTOPTR for aggregate types util: hook: use VIR_AUTOFREE instead of VIR_FREE for scalar types util: hook: use VIR_AUTOPTR for aggregate types util: pci: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC util: pci: use VIR_AUTOFREE instead of VIR_FREE for scalar types util: pci: use VIR_AUTOPTR for aggregate types util: netdevvlan: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC util: usb: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC util: usb: use VIR_AUTOFREE instead of VIR_FREE for scalar types util: usb: use VIR_AUTOPTR for aggregate types util: scsi: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC util: scsi: use VIR_AUTOFREE instead of VIR_FREE for scalar types util: scsi: use VIR_AUTOPTR for aggregate types util: scsivhost: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC util: scsivhost: use VIR_AUTOPTR for aggregate types util: hostdev: use VIR_AUTOFREE instead of VIR_FREE for scalar types util: hostdev: use VIR_AUTOPTR for aggregate types util: hostmem: use VIR_AUTOFREE instead of VIR_FREE for scalar types util: iptables: use VIR_AUTOFREE instead of VIR_FREE for scalar types util: iscsi: use VIR_AUTOFREE instead of VIR_FREE for scalar types util: iscsi: use VIR_AUTOPTR for aggregate types util: kmod: use VIR_AUTOFREE instead of VIR_FREE for scalar types util: kmod: use VIR_AUTOPTR for aggregate types util: lease: use VIR_AUTOFREE instead of VIR_FREE for scalar types util: lease: use VIR_AUTOPTR for aggregate types src/libvirt-lxc.c | 4 +- src/lxc/lxc_cgroup.c | 4 +- src/lxc/lxc_container.c | 2 +- src/lxc/lxc_controller.c | 2 +- src/lxc/lxc_domain.c | 2 +- src/lxc/lxc_process.c | 10 +- src/qemu/qemu_cgroup.c | 16 +- src/qemu/qemu_domain.c | 2 +- src/qemu/qemu_driver.c | 34 ++- src/qemu/qemu_process.c | 2 +- src/util/virbuffer.c | 34 ++- src/util/virbuffer.h | 9 +- src/util/vircgroup.c | 718 +++++++++++++++++------------------------------ src/util/vircgroup.h | 11 +- src/util/vircgrouppriv.h | 2 +- src/util/virerror.c | 1 - src/util/virerror.h | 3 + src/util/virfirewall.c | 53 ++-- src/util/virfirewall.h | 3 + src/util/virhash.c | 1 - src/util/virhash.h | 4 + src/util/virhook.c | 20 +- src/util/virhostdev.c | 162 ++++------- src/util/virhostmem.c | 57 ++-- src/util/viriptables.c | 52 ++-- src/util/viriscsi.c | 89 ++---- src/util/virkmod.c | 38 +-- src/util/virlease.c | 82 ++---- src/util/virmdev.c | 84 ++---- src/util/virmdev.h | 4 + src/util/virnetdevvlan.c | 1 - src/util/virnetdevvlan.h | 4 + src/util/virpci.c | 323 +++++++-------------- src/util/virpci.h | 4 + src/util/virscsi.c | 64 ++--- src/util/virscsi.h | 3 + src/util/virscsivhost.c | 8 +- src/util/virscsivhost.h | 3 + src/util/virusb.c | 22 +- src/util/virusb.h | 3 + tests/vircgrouptest.c | 42 +-- 41 files changed, 739 insertions(+), 1243 deletions(-) -- 1.8.3.1

3 92

[libvirt] [PATCH] conf: Don't parse edev of non-passthrough input device
by Han Han 26 Jul '18

26 Jul '18

In input devices, edev attribute is only for passthrough devices. Don't parse this for other input devices. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1591151 Signed-off-by: Han Han <hhan(a)redhat.com> --- src/conf/domain_conf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 7396616eda..ea2e796b78 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -13050,7 +13050,8 @@ virDomainInputDefParseXML(virDomainXMLOptionPtr xmlopt, goto error; } - if ((evdev = virXPathString("string(./source/@evdev)", ctxt))) + if ((evdev = virXPathString("string(./source/@evdev)", ctxt)) && + (def->type == VIR_DOMAIN_INPUT_TYPE_PASSTHROUGH)) def->source.evdev = virFileSanitizePath(evdev); if (def->type == VIR_DOMAIN_INPUT_TYPE_PASSTHROUGH && !def->source.evdev) { virReportError(VIR_ERR_XML_ERROR, "%s", -- 2.17.1

2 2

[libvirt] [PATCH] nwfilter: Resolve SEGV for NWFilter Snoop processing
by John Ferlan 26 Jul '18

26 Jul '18

https://bugzilla.redhat.com/show_bug.cgi?id=1599973 Commit id fca9afa08 changed the @req->ifname to use @req->binding->portdevname fillingin the @req->binding in a similar way that @req->ifname would have been filled in during virNWFilterDHCPSnoopReq processing. However, in doing so it did not take into account some code paths where the @req->binding should be checked instead of @req->binding->portdevname. These checks led to SEGVs in some cases during libvirtd reload processing in virNWFilterSnoopRemAllReqIter (for stop during nwfilterStateCleanup processing) and virNWFilterSnoopReqLeaseDel (for start during nwfilterStateInitialize processing). In particular, when reading the nwfilter.leases file a new @req is created, but the @req->binding is not filled in. That's left to virNWFilterDHCPSnoopReq processing which checks if the @req already exists in the @virNWFilterSnoopState.snoopReqs hash table after adding a virNWFilterSnoopState.ifnameToKey entry for the @req->binding->portdevname by a @ref->ikey value. NB: virNWFilterSnoopIPLeaseInstallRule and virNWFilterDHCPSnoopThread do not need the req->binding check since they can only be called after the filter->binding is created/assigned. Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- src/nwfilter/nwfilter_dhcpsnoop.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/src/nwfilter/nwfilter_dhcpsnoop.c b/src/nwfilter/nwfilter_dhcpsnoop.c index c7fd370598..2330ba0479 100644 --- a/src/nwfilter/nwfilter_dhcpsnoop.c +++ b/src/nwfilter/nwfilter_dhcpsnoop.c @@ -846,7 +846,7 @@ virNWFilterSnoopReqLeaseDel(virNWFilterSnoopReqPtr req, int ret = 0; virNWFilterSnoopIPLeasePtr ipl; char *ipstr = NULL; - int ipAddrLeft; + int ipAddrLeft = 0; /* protect req->start, req->ifname and the lease */ virNWFilterSnoopReqLock(req); @@ -867,7 +867,8 @@ virNWFilterSnoopReqLeaseDel(virNWFilterSnoopReqPtr req, if (update_leasefile) virNWFilterSnoopLeaseFileSave(ipl); - ipAddrLeft = virNWFilterIPAddrMapDelIPAddr(req->binding->portdevname, ipstr); + if (req->binding) + ipAddrLeft = virNWFilterIPAddrMapDelIPAddr(req->binding->portdevname, ipstr); if (!req->threadkey || !instantiate) goto skip_instantiate; @@ -2037,7 +2038,7 @@ virNWFilterSnoopRemAllReqIter(const void *payload, /* protect req->binding->portdevname */ virNWFilterSnoopReqLock(req); - if (req->binding->portdevname) { + if (req->binding && req->binding->portdevname) { ignore_value(virHashRemoveEntry(virNWFilterSnoopState.ifnameToKey, req->binding->portdevname)); -- 2.17.1

2 1

[libvirt] interactions between virDomainSetVcpusFlags and NUMA/pinning?
by Chris Friesen 26 Jul '18

26 Jul '18

Hi, Just wondering about interactions between virDomainSetVcpusFlags() and virDomainPinVcpuFlags() and the domain XML. 1) If I add a vCPU to a domain, do I need to pin it after or does it respect the vCPU-to-pCPU mapping specified in the domain XML? 2) Are vCPUs added/removed in strict numerical order such that at any given time the active vCPUs are numbered 0-(N-1) where N is the number of active vCPUs? 3) Will the newly-added vCPUs respect the NUMA topology specified in the domain XML? Thanks, Chris

1 0

[libvirt] [PATCH v3 0/3] Alter qemu live/cold device attach algorithm
by John Ferlan 25 Jul '18

25 Jul '18

v2: https://www.redhat.com/archives/libvir-list/2018-July/msg00361.html Differences to v2: Patch1: NEW - As a result of code review the suggestion was to utilize the virDomainDefCompatibleDevice in order to make the check more generic to include <disk>'s which were also afflicted with the same problem that I was trying to solve with the former patch1 just for <hostdev>'s. However, this led me down into the abyss of more changes since <disk>'s have multiple <address type='drive'...> target bus types (IDE and SCSI). That means we need to have a mechanism to pass the target bus along so that a SCSI drive address doesn't inadvertently match an IDE drive address. All that is complicated by the way virDomainDefHasDeviceAddress iterates through all the device lists. Whether there are more similar devices I'm assuming will fall out of code review. Patch2: This moves the virDomainDefHasDeviceAddress into the more common config checking virDomainDefCompatibleDevice method, but now needs to also account for the disk bus issue. This theoretically could be combined with Patch1, but keeping them separate I would hope makes for simpler code review. I could also move code out of virDomainDefHasDeviceAddressIterator into patch2, but if just felt better in patch1. Patch3: No changes were made (amazingly so). In the end quite a bit more complicated John Ferlan (3): conf: Add @target_bus to virDomainDefHasDeviceAddress qemu: Check for existing address when cold attach device qemu: Use the correct vm def on cold attach src/conf/domain_conf.c | 54 +++++++++++++++++++++++++++++++++++--- src/conf/domain_conf.h | 3 ++- src/qemu/qemu_driver.c | 59 ++++++++++++++++-------------------------- 3 files changed, 75 insertions(+), 41 deletions(-) -- 2.17.1

3 8

[libvirt] [PATCH 0/2] Allow for further expected failures when listening on sockets
by Daniel P. Berrangé 25 Jul '18

25 Jul '18

Daniel P. Berrangé (2): socket: preserve real errno when socket/bind calls fail rpc: treat EADDRNOTAVAIL as non-fatal when listening src/rpc/virnetsocket.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) -- 2.17.1

2 5

[libvirt] [PATCH v3 0/2] Support network stats for VF representor interface
by Jai Singh Rana 25 Jul '18

25 Jul '18

With availability of switchdev model in linux, it is possible to capture stats for SR-IOV device with interface_type as 'hostdev' provided device supports VF represontor in switchdev mode[1] on host. These stats are supported by adding helper APIs for getting/verifying VF representor name based on PCI Bus:Device:Function information in domains 'hostdev' structure and querying required net sysfs directory and file entries on host according to switchdev model. These helper APIs are then used in qemu/conf to get the interface stats for VF representor on host of pci SR-IOV device. [1] https://www.kernel.org/doc/Documentation/networking/switchdev.txt V2 https://www.redhat.com/archives/libvir-list/2018-February/msg00561.html Jai Singh Rana (2): util: Add helper APIs to get/verify VF Representor name qemu: conf: Network stats support for VF Representors docs/news.xml | 9 ++ po/POTFILES.in | 1 + src/conf/domain_conf.c | 15 ++ src/libvirt_private.syms | 7 + src/qemu/qemu_driver.c | 33 +++- src/util/Makefile.inc.am | 2 + src/util/virhostdev.c | 2 +- src/util/virhostdev.h | 8 + src/util/virnetdevhostdev.c | 374 ++++++++++++++++++++++++++++++++++++++++++++ src/util/virnetdevhostdev.h | 35 +++++ 10 files changed, 481 insertions(+), 5 deletions(-) create mode 100644 src/util/virnetdevhostdev.c create mode 100644 src/util/virnetdevhostdev.h -- 2.13.6

3 5

[libvirt] [PATCHv3] replace 'if' type conditions with 'switch' for VIR_NETWORK_FORWARD_
by Shi Lei 25 Jul '18

25 Jul '18

Signed-off-by: Shi Lei <shilei.massclouds(a)gmx.com> --- v2 here: https://www.redhat.com/archives/libvir-list/2018-July/msg01423.html since v2: - typecast def->forward.type to virNetworkForwardType explicitly in all the switches rather than change its type to enum in the struct definition v1 here: https://www.redhat.com/archives/libvir-list/2018-July/msg01314.html since v1: - Change the type declaration of _virNetworkForwardDef.type from int to virNetworkForwardType - use the default case to report out of range error with virReportEnumRangeError src/conf/domain_conf.c | 49 ++++--- src/conf/network_conf.c | 75 +++++++--- src/conf/virnetworkobj.c | 24 +++- src/esx/esx_network_driver.c | 19 ++- src/libvirt_private.syms | 1 + src/network/bridge_driver.c | 317 ++++++++++++++++++++++++++++--------------- src/qemu/qemu_process.c | 10 +- 7 files changed, 334 insertions(+), 161 deletions(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 178c6d2..33b0b4a 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -29975,40 +29975,49 @@ virDomainNetResolveActualType(virDomainNetDefPtr iface) if (!(def = virNetworkDefParseString(xml))) goto cleanup; - if ((def->forward.type == VIR_NETWORK_FORWARD_NONE) || - (def->forward.type == VIR_NETWORK_FORWARD_NAT) || - (def->forward.type == VIR_NETWORK_FORWARD_ROUTE) || - (def->forward.type == VIR_NETWORK_FORWARD_OPEN)) { + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: /* for these forward types, the actual net type really *is* * NETWORK; we just keep the info from the portgroup in * iface->data.network.actual */ ret = VIR_DOMAIN_NET_TYPE_NETWORK; + break; - } else if ((def->forward.type == VIR_NETWORK_FORWARD_BRIDGE) && - def->bridge) { - - /* <forward type='bridge'/> <bridge name='xxx'/> - * is VIR_DOMAIN_NET_TYPE_BRIDGE - */ - - ret = VIR_DOMAIN_NET_TYPE_BRIDGE; - - } else if (def->forward.type == VIR_NETWORK_FORWARD_HOSTDEV) { - + case VIR_NETWORK_FORWARD_HOSTDEV: ret = VIR_DOMAIN_NET_TYPE_HOSTDEV; + break; - } else if ((def->forward.type == VIR_NETWORK_FORWARD_BRIDGE) || - (def->forward.type == VIR_NETWORK_FORWARD_PRIVATE) || - (def->forward.type == VIR_NETWORK_FORWARD_VEPA) || - (def->forward.type == VIR_NETWORK_FORWARD_PASSTHROUGH)) { + case VIR_NETWORK_FORWARD_BRIDGE: + if (def->bridge) { + /* <forward type='bridge'/> <bridge name='xxx'/> + * is VIR_DOMAIN_NET_TYPE_BRIDGE + */ + ret = VIR_DOMAIN_NET_TYPE_BRIDGE; + break; + } + + /* intentionally fall through to the direct case for + * VIR_NETWORK_FORWARD_BRIDGE with no bridge device defined + */ + ATTRIBUTE_FALLTHROUGH; + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: /* <forward type='bridge|private|vepa|passthrough'> are all * VIR_DOMAIN_NET_TYPE_DIRECT. */ - ret = VIR_DOMAIN_NET_TYPE_DIRECT; + break; + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto cleanup; } cleanup: diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index 630a87f..c08456b 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -1874,7 +1874,7 @@ virNetworkDefParseXML(xmlXPathContextPtr ctxt) /* Validate some items in the main NetworkDef that need to align * with the chosen forward mode. */ - switch (def->forward.type) { + switch ((virNetworkForwardType) def->forward.type) { case VIR_NETWORK_FORWARD_NONE: break; @@ -1955,21 +1955,40 @@ virNetworkDefParseXML(xmlXPathContextPtr ctxt) goto error; } break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto error; } VIR_FREE(stp); - if (def->mtu && - (def->forward.type != VIR_NETWORK_FORWARD_NONE && - def->forward.type != VIR_NETWORK_FORWARD_NAT && - def->forward.type != VIR_NETWORK_FORWARD_ROUTE && - def->forward.type != VIR_NETWORK_FORWARD_OPEN)) { - virReportError(VIR_ERR_XML_ERROR, - _("mtu size only allowed in open, route, nat, " - "and isolated mode, not in %s (network '%s')"), - virNetworkForwardTypeToString(def->forward.type), - def->name); - goto error; + if (def->mtu) { + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: + break; + + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: + virReportError(VIR_ERR_XML_ERROR, + _("mtu size only allowed in open, route, nat, " + "and isolated mode, not in %s (network '%s')"), + virNetworkForwardTypeToString(def->forward.type), + def->name); + goto error; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto error; + } } /* Extract custom metadata */ @@ -2349,6 +2368,7 @@ virNetworkDefFormatBuf(virBufferPtr buf, char uuidstr[VIR_UUID_STRING_BUFLEN]; size_t i; bool shortforward; + bool hasbridge = false; virBufferAddLit(buf, "<network"); if (!(flags & VIR_NETWORK_XML_INACTIVE) && (def->connections > 0)) @@ -2469,22 +2489,33 @@ virNetworkDefFormatBuf(virBufferPtr buf, virBufferAddLit(buf, "</forward>\n"); } + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: + hasbridge = true; + break; - if (def->forward.type == VIR_NETWORK_FORWARD_NONE || - def->forward.type == VIR_NETWORK_FORWARD_NAT || - def->forward.type == VIR_NETWORK_FORWARD_ROUTE || - def->forward.type == VIR_NETWORK_FORWARD_OPEN || - def->bridge || def->macTableManager) { + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: + break; + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto error; + } + + if (hasbridge || def->bridge || def->macTableManager) { virBufferAddLit(buf, "<bridge"); virBufferEscapeString(buf, " name='%s'", def->bridge); - if (def->forward.type == VIR_NETWORK_FORWARD_NONE || - def->forward.type == VIR_NETWORK_FORWARD_NAT || - def->forward.type == VIR_NETWORK_FORWARD_ROUTE || - def->forward.type == VIR_NETWORK_FORWARD_OPEN) { + if (hasbridge) virBufferAsprintf(buf, " stp='%s' delay='%ld'", def->stp ? "on" : "off", def->delay); - } if (def->macTableManager) { virBufferAsprintf(buf, " macTableManager='%s'", virNetworkBridgeMACTableManagerTypeToString(def->macTableManager)); diff --git a/src/conf/virnetworkobj.c b/src/conf/virnetworkobj.c index e00c8a7..b13e5a7 100644 --- a/src/conf/virnetworkobj.c +++ b/src/conf/virnetworkobj.c @@ -1009,19 +1009,31 @@ virNetworkLoadConfig(virNetworkObjListPtr nets, goto error; } - if (def->forward.type == VIR_NETWORK_FORWARD_NONE || - def->forward.type == VIR_NETWORK_FORWARD_NAT || - def->forward.type == VIR_NETWORK_FORWARD_ROUTE || - def->forward.type == VIR_NETWORK_FORWARD_OPEN) { - + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: if (!def->mac_specified) { virNetworkSetBridgeMacAddr(def); virNetworkSaveConfig(configDir, def); } - } else { + break; + + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: /* Throw away MAC address for other forward types, * which could have been generated by older libvirt RPMs */ def->mac_specified = false; + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto error; } if (!(obj = virNetworkObjAssignDef(nets, def, 0))) diff --git a/src/esx/esx_network_driver.c b/src/esx/esx_network_driver.c index 04118b4..31bceb7 100644 --- a/src/esx/esx_network_driver.c +++ b/src/esx/esx_network_driver.c @@ -326,12 +326,27 @@ esxNetworkDefineXML(virConnectPtr conn, const char *xml) } /* FIXME: Add support for NAT */ - if (def->forward.type != VIR_NETWORK_FORWARD_NONE && - def->forward.type != VIR_NETWORK_FORWARD_BRIDGE) { + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_BRIDGE: + break; + + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: virReportError(VIR_ERR_CONFIG_UNSUPPORTED, _("Unsupported forward mode '%s'"), virNetworkForwardTypeToString(def->forward.type)); goto cleanup; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto cleanup; } /* Verify that specified HostPortGroups don't exist already */ diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 1a4cf98..fc386e1 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -2369,6 +2369,7 @@ virNetDevMacVLanCreate; virNetDevMacVLanCreateWithVPortProfile; virNetDevMacVLanDelete; virNetDevMacVLanDeleteWithVPortProfile; +virNetDevMacVLanModeTypeFromString; virNetDevMacVLanReleaseName; virNetDevMacVLanReserveName; virNetDevMacVLanRestartWithVPortProfile; diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index da3c32e..ed8a8bf 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -446,7 +446,7 @@ networkUpdateState(virNetworkObjPtr obj, } def = virNetworkObjGetDef(obj); - switch (def->forward.type) { + switch ((virNetworkForwardType) def->forward.type) { case VIR_NETWORK_FORWARD_NONE: case VIR_NETWORK_FORWARD_NAT: case VIR_NETWORK_FORWARD_ROUTE: @@ -485,6 +485,11 @@ networkUpdateState(virNetworkObjPtr obj, case VIR_NETWORK_FORWARD_HOSTDEV: /* so far no extra checks */ break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto cleanup; } /* Try and read dnsmasq/radvd pids of active networks */ @@ -2088,20 +2093,37 @@ networkRefreshDaemonsHelper(virNetworkObjPtr obj, virObjectLock(obj); def = virNetworkObjGetDef(obj); - if (virNetworkObjIsActive(obj) && - ((def->forward.type == VIR_NETWORK_FORWARD_NONE) || - (def->forward.type == VIR_NETWORK_FORWARD_NAT) || - (def->forward.type == VIR_NETWORK_FORWARD_ROUTE) || - (def->forward.type == VIR_NETWORK_FORWARD_OPEN))) { - /* Only the three L3 network types that are configured by - * libvirt will have a dnsmasq or radvd daemon associated - * with them. Here we send a SIGHUP to an existing - * dnsmasq and/or radvd, or restart them if they've - * disappeared. - */ - networkRefreshDhcpDaemon(driver, obj); - networkRefreshRadvd(driver, obj); + if (virNetworkObjIsActive(obj)) { + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: + /* Only the three L3 network types that are configured by + * libvirt will have a dnsmasq or radvd daemon associated + * with them. Here we send a SIGHUP to an existing + * dnsmasq and/or radvd, or restart them if they've + * disappeared. + */ + networkRefreshDhcpDaemon(driver, obj); + networkRefreshRadvd(driver, obj); + break; + + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto cleanup; + } } + + cleanup: virObjectUnlock(obj); return 0; } @@ -2128,20 +2150,37 @@ networkReloadFirewallRulesHelper(virNetworkObjPtr obj, virObjectLock(obj); def = virNetworkObjGetDef(obj); - if (virNetworkObjIsActive(obj) && - ((def->forward.type == VIR_NETWORK_FORWARD_NONE) || - (def->forward.type == VIR_NETWORK_FORWARD_NAT) || - (def->forward.type == VIR_NETWORK_FORWARD_ROUTE))) { - /* Only three of the L3 network types that are configured by - * libvirt need to have iptables rules reloaded. The 4th L3 - * network type, forward='open', doesn't need this because it - * has no iptables rules. - */ - networkRemoveFirewallRules(def); - if (networkAddFirewallRules(def) < 0) { - /* failed to add but already logged */ + if (virNetworkObjIsActive(obj)) { + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + /* Only three of the L3 network types that are configured by + * libvirt need to have iptables rules reloaded. The 4th L3 + * network type, forward='open', doesn't need this because it + * has no iptables rules. + */ + networkRemoveFirewallRules(def); + /* No need to check return value since already logged internally */ + ignore_value(networkAddFirewallRules(def)); + break; + + case VIR_NETWORK_FORWARD_OPEN: + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto cleanup; } } + + cleanup: virObjectUnlock(obj); return 0; } @@ -2687,7 +2726,7 @@ networkCreateInterfacePool(virNetworkDefPtr netdef) virNetworkForwardIfDefPtr thisIf = &netdef->forward.ifs[netdef->forward.nifs]; - switch (netdef->forward.type) { + switch ((virNetworkForwardType) netdef->forward.type) { case VIR_NETWORK_FORWARD_BRIDGE: case VIR_NETWORK_FORWARD_PRIVATE: case VIR_NETWORK_FORWARD_VEPA: @@ -2719,9 +2758,13 @@ networkCreateInterfacePool(virNetworkDefPtr netdef) case VIR_NETWORK_FORWARD_NAT: case VIR_NETWORK_FORWARD_ROUTE: case VIR_NETWORK_FORWARD_OPEN: - case VIR_NETWORK_FORWARD_LAST: /* by definition these will never be encountered here */ break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, netdef->forward.type); + goto cleanup; } } @@ -2811,7 +2854,7 @@ networkStartNetwork(virNetworkDriverStatePtr driver, VIR_HOOK_SUBOP_BEGIN) < 0) goto cleanup; - switch (def->forward.type) { + switch ((virNetworkForwardType) def->forward.type) { case VIR_NETWORK_FORWARD_NONE: case VIR_NETWORK_FORWARD_NAT: @@ -2840,6 +2883,11 @@ networkStartNetwork(virNetworkDriverStatePtr driver, if (networkStartNetworkExternal(obj) < 0) goto cleanup; break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto cleanup; } /* finally we can call the 'started' hook script if any */ @@ -2893,7 +2941,7 @@ networkShutdownNetwork(virNetworkDriverStatePtr driver, unlink(stateFile); VIR_FREE(stateFile); - switch (def->forward.type) { + switch ((virNetworkForwardType) def->forward.type) { case VIR_NETWORK_FORWARD_NONE: case VIR_NETWORK_FORWARD_NAT: @@ -2919,6 +2967,11 @@ networkShutdownNetwork(virNetworkDriverStatePtr driver, case VIR_NETWORK_FORWARD_HOSTDEV: ret = networkShutdownNetworkExternal(obj); break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + return -1; } /* now that we know it's stopped call the hook if present */ @@ -3273,11 +3326,11 @@ networkValidate(virNetworkDriverStatePtr driver, /* Only the three L3 network types that are configured by libvirt * need to have a bridge device name / mac address provided */ - if (def->forward.type == VIR_NETWORK_FORWARD_NONE || - def->forward.type == VIR_NETWORK_FORWARD_NAT || - def->forward.type == VIR_NETWORK_FORWARD_ROUTE || - def->forward.type == VIR_NETWORK_FORWARD_OPEN) { - + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: /* if no bridge name was given in the config, find a name * unused by any other libvirt networks and assign it. */ @@ -3285,7 +3338,13 @@ networkValidate(virNetworkDriverStatePtr driver, return -1; virNetworkSetBridgeMacAddr(def); - } else { + break; + + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: /* They are also the only types that currently support setting * a MAC or IP address for the host-side device (bridge), DNS * configuration, or network-wide bandwidth limits. @@ -3331,6 +3390,12 @@ networkValidate(virNetworkDriverStatePtr driver, return -1; } bandwidthAllowed = false; + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + return -1; } /* we support configs with a single PF defined: @@ -3755,9 +3820,10 @@ networkUpdate(virNetworkPtr net, /* Take care of anything that must be done before updating the * live NetworkDef. */ - if (def->forward.type == VIR_NETWORK_FORWARD_NONE || - def->forward.type == VIR_NETWORK_FORWARD_NAT || - def->forward.type == VIR_NETWORK_FORWARD_ROUTE) { + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: switch (section) { case VIR_NETWORK_SECTION_FORWARD: case VIR_NETWORK_SECTION_FORWARD_INTERFACE: @@ -3768,14 +3834,26 @@ networkUpdate(virNetworkPtr net, * old rules (and remember to load new ones after the * update). */ - if (def->forward.type != VIR_NETWORK_FORWARD_OPEN) { - networkRemoveFirewallRules(def); - needFirewallRefresh = true; - } + networkRemoveFirewallRules(def); + needFirewallRefresh = true; break; default: break; } + break; + + case VIR_NETWORK_FORWARD_OPEN: + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto cleanup; } } @@ -4440,10 +4518,11 @@ networkAllocateActualDevice(virDomainDefPtr dom, iface->data.network.actual->trustGuestRxFilters = netdef->trustGuestRxFilters; - if ((netdef->forward.type == VIR_NETWORK_FORWARD_NONE) || - (netdef->forward.type == VIR_NETWORK_FORWARD_NAT) || - (netdef->forward.type == VIR_NETWORK_FORWARD_ROUTE) || - (netdef->forward.type == VIR_NETWORK_FORWARD_OPEN)) { + switch ((virNetworkForwardType) netdef->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: /* for these forward types, the actual net type really *is* * NETWORK; we just keep the info from the portgroup in * iface->data.network.actual @@ -4463,46 +4542,9 @@ networkAllocateActualDevice(virDomainDefPtr dom, if (networkPlugBandwidth(obj, iface) < 0) goto error; + break; - } else if ((netdef->forward.type == VIR_NETWORK_FORWARD_BRIDGE) && - netdef->bridge) { - - /* <forward type='bridge'/> <bridge name='xxx'/> - * is VIR_DOMAIN_NET_TYPE_BRIDGE - */ - - iface->data.network.actual->type = actualType = VIR_DOMAIN_NET_TYPE_BRIDGE; - if (VIR_STRDUP(iface->data.network.actual->data.bridge.brname, - netdef->bridge) < 0) - goto error; - iface->data.network.actual->data.bridge.macTableManager - = netdef->macTableManager; - - /* merge virtualports from interface, network, and portgroup to - * arrive at actual virtualport to use - */ - if (virNetDevVPortProfileMerge3(&iface->data.network.actual->virtPortProfile, - iface->virtPortProfile, - netdef->virtPortProfile, - portgroup - ? portgroup->virtPortProfile : NULL) < 0) { - goto error; - } - virtport = iface->data.network.actual->virtPortProfile; - if (virtport) { - /* only type='openvswitch' is allowed for bridges */ - if (virtport->virtPortType != VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("<virtualport type='%s'> not supported for network " - "'%s' which uses a bridge device"), - virNetDevVPortTypeToString(virtport->virtPortType), - netdef->name); - goto error; - } - } - - } else if (netdef->forward.type == VIR_NETWORK_FORWARD_HOSTDEV) { - + case VIR_NETWORK_FORWARD_HOSTDEV: { virDomainHostdevSubsysPCIBackendType backend; iface->data.network.actual->type = actualType = VIR_DOMAIN_NET_TYPE_HOSTDEV; @@ -4575,32 +4617,67 @@ networkAllocateActualDevice(virDomainDefPtr dom, goto error; } } + break; + } + + case VIR_NETWORK_FORWARD_BRIDGE: + if (netdef->bridge) { + /* <forward type='bridge'/> <bridge name='xxx'/> + * is VIR_DOMAIN_NET_TYPE_BRIDGE + */ + + iface->data.network.actual->type = actualType = VIR_DOMAIN_NET_TYPE_BRIDGE; + if (VIR_STRDUP(iface->data.network.actual->data.bridge.brname, + netdef->bridge) < 0) + goto error; + iface->data.network.actual->data.bridge.macTableManager + = netdef->macTableManager; + + /* merge virtualports from interface, network, and portgroup to + * arrive at actual virtualport to use + */ + if (virNetDevVPortProfileMerge3(&iface->data.network.actual->virtPortProfile, + iface->virtPortProfile, + netdef->virtPortProfile, + portgroup + ? portgroup->virtPortProfile : NULL) < 0) { + goto error; + } + virtport = iface->data.network.actual->virtPortProfile; + if (virtport) { + /* only type='openvswitch' is allowed for bridges */ + if (virtport->virtPortType != VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("<virtualport type='%s'> not supported for network " + "'%s' which uses a bridge device"), + virNetDevVPortTypeToString(virtport->virtPortType), + netdef->name); + goto error; + } + } + break; + } - } else if ((netdef->forward.type == VIR_NETWORK_FORWARD_BRIDGE) || - (netdef->forward.type == VIR_NETWORK_FORWARD_PRIVATE) || - (netdef->forward.type == VIR_NETWORK_FORWARD_VEPA) || - (netdef->forward.type == VIR_NETWORK_FORWARD_PASSTHROUGH)) { + /* intentionally fall through to the direct case for + * VIR_NETWORK_FORWARD_BRIDGE with no bridge device defined + */ + ATTRIBUTE_FALLTHROUGH; + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: /* <forward type='bridge|private|vepa|passthrough'> are all * VIR_DOMAIN_NET_TYPE_DIRECT. */ /* Set type=direct and appropriate <source mode='xxx'/> */ iface->data.network.actual->type = actualType = VIR_DOMAIN_NET_TYPE_DIRECT; - switch (netdef->forward.type) { - case VIR_NETWORK_FORWARD_BRIDGE: - iface->data.network.actual->data.direct.mode = VIR_NETDEV_MACVLAN_MODE_BRIDGE; - break; - case VIR_NETWORK_FORWARD_PRIVATE: - iface->data.network.actual->data.direct.mode = VIR_NETDEV_MACVLAN_MODE_PRIVATE; - break; - case VIR_NETWORK_FORWARD_VEPA: - iface->data.network.actual->data.direct.mode = VIR_NETDEV_MACVLAN_MODE_VEPA; - break; - case VIR_NETWORK_FORWARD_PASSTHROUGH: - iface->data.network.actual->data.direct.mode = VIR_NETDEV_MACVLAN_MODE_PASSTHRU; - break; - } + + /* NO need to check the value returned from virNetDevMacVLanModeTypeFromString + * it must be valid for these forward type(bridge|private|vepa|passthrough) + */ + iface->data.network.actual->data.direct.mode = + virNetDevMacVLanModeTypeFromString(virNetworkForwardTypeToString(netdef->forward.type)); /* merge virtualports from interface, network, and portgroup to * arrive at actual virtualport to use @@ -4680,6 +4757,12 @@ networkAllocateActualDevice(virDomainDefPtr dom, dev->device.dev) < 0) goto error; } + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, netdef->forward.type); + goto error; } if (virNetworkObjMacMgrAdd(obj, driver->dnsmasqStateDir, @@ -5037,13 +5120,27 @@ networkReleaseActualDevice(virDomainDefPtr dom, } netdef = virNetworkObjGetDef(obj); - if (iface->data.network.actual && - (netdef->forward.type == VIR_NETWORK_FORWARD_NONE || - netdef->forward.type == VIR_NETWORK_FORWARD_NAT || - netdef->forward.type == VIR_NETWORK_FORWARD_ROUTE || - netdef->forward.type == VIR_NETWORK_FORWARD_OPEN) && - networkUnplugBandwidth(obj, iface) < 0) + switch ((virNetworkForwardType) netdef->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: + if (iface->data.network.actual && networkUnplugBandwidth(obj, iface) < 0) + goto error; + break; + + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, netdef->forward.type); goto error; + } if ((!iface->data.network.actual) || ((actualType != VIR_DOMAIN_NET_TYPE_DIRECT) && diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index bba157b..27bd8b9 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -4545,7 +4545,7 @@ qemuProcessGetNetworkAddress(const char *netname, if (!netdef) goto cleanup; - switch (netdef->forward.type) { + switch ((virNetworkForwardType) netdef->forward.type) { case VIR_NETWORK_FORWARD_NONE: case VIR_NETWORK_FORWARD_NAT: case VIR_NETWORK_FORWARD_ROUTE: @@ -4582,6 +4582,14 @@ qemuProcessGetNetworkAddress(const char *netname, goto cleanup; } break; + + case VIR_NETWORK_FORWARD_HOSTDEV: + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, netdef->forward.type); + goto cleanup; } if (dev_name) { -- 2.7.4

2 2