[libvirt] [PATCH v3 0/6] Add setting CPU features (CPUID) with libxenlight driver.
by Marek Marczykowski-Górecki
Add support for CPUID setting based on <cpu> element. Since libxl format
support only adjusting specific bits over host CPU, only
mode='host-passthrough' is supported - other values are rejected (including
default 'custom'). This will break some configurations working before (bare
<cpu> element with for example NUMA configuration), but libxl driver never
supported full 'custom' mode - it was silently ignored, which might lead to
some unexpected effects.
Since mode='host-passthrough' is now necessary to specify CPU options, do not
enable nested HVM feature by mere presence of this element, require explicit
enabling "vmx" or "svm" bits. Nested HVM is still in "preview" state, so better
be explicit here.
v2 of this patch series:
https://www.redhat.com/archives/libvir-list/2017-July/msg00050.html
Marek Marczykowski-Górecki (6):
libxl: error out on not supported CPU mode, instead of silently ignoring
libxl: do not enable nested HVM by mere presence of <cpu> element
libxl: add support for CPUID features policy
tests: check CPU features handling in libxl driver
xenconfig: add CPUID handling to domXML <-> xl.cfg conversion
tests: add test case for CPUID in xenconfig driver
src/libxl/libxl_conf.c | 53 +-
src/xenconfig/xen_xl.c | 260 ++++++++-
src/xenconfig/xen_xl.h | 2 +-
tests/libxlxml2domconfigdata/fullvirt-cpuid.json | 64 ++-
tests/libxlxml2domconfigdata/fullvirt-cpuid.xml | 37 +-
tests/libxlxml2domconfigdata/vnuma-hvm.json | 1 +-
tests/libxlxml2domconfigtest.c | 1 +-
tests/xlconfigdata/test-fullvirt-cpuid.cfg | 25 +-
tests/xlconfigdata/test-fullvirt-cpuid.xml | 36 +-
tests/xlconfigdata/test-fullvirt-nestedhvm.xml | 4 +-
tests/xlconfigdata/test-fullvirt-vnuma-autocomplete.xml | 2 +-
tests/xlconfigdata/test-fullvirt-vnuma-nodistances.xml | 2 +-
tests/xlconfigdata/test-fullvirt-vnuma-partialdist.xml | 2 +-
tests/xlconfigdata/test-fullvirt-vnuma.xml | 2 +-
tests/xlconfigtest.c | 1 +-
15 files changed, 453 insertions(+), 39 deletions(-)
create mode 100644 tests/libxlxml2domconfigdata/fullvirt-cpuid.json
create mode 100644 tests/libxlxml2domconfigdata/fullvirt-cpuid.xml
create mode 100644 tests/xlconfigdata/test-fullvirt-cpuid.cfg
create mode 100644 tests/xlconfigdata/test-fullvirt-cpuid.xml
base-commit: 984c534a3f2219444f4cb4df61d77b8c6e5054d7
--
git-series 0.9.1
6 years, 11 months
[libvirt] [PATCH V3] blockjob: Fix error checking of blockjob status
by Jie Wang
offset and len can also be equal to 0 on failed if blockjob return
status:"BLOCK_JOB_COMPLETED" with error:"File descriptor in bad state",
so it's better to make our decision based on whether 'error' is non-NULL.
---
src/qemu/qemu_monitor_json.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
index e45868b..18b2ad6 100644
--- a/src/qemu/qemu_monitor_json.c
+++ b/src/qemu/qemu_monitor_json.c
@@ -885,8 +885,7 @@ qemuMonitorJSONHandleBlockJobImpl(qemuMonitorPtr mon,
switch ((virConnectDomainEventBlockJobStatus) event) {
case VIR_DOMAIN_BLOCK_JOB_COMPLETED:
error = virJSONValueObjectGetString(data, "error");
- /* Make sure the whole device has been processed */
- if (offset != len)
+ if (offset != len || error)
event = VIR_DOMAIN_BLOCK_JOB_FAILED;
break;
case VIR_DOMAIN_BLOCK_JOB_CANCELED:
--
1.8.3.1
6 years, 11 months
[libvirt] [PATCH] qemu_hotplug: use VIR_ERR_NO_DEVICE when target detaching device is not found
by Chen Hanxiao
From: Chen Hanxiao <chenhanxiao(a)gmail.com>
We used VIR_ERR_OPERATION_FAILED when target detaching device
is not found.
That error code VIR_ERR_OPERATION_FAILED is widely used,
so the tools powered by libvirt, such as nova,
can't catch the exact errors from libvirt.
This patch uses VIR_ERR_NO_DEVICE instead.
Signed-off-by: Chen Hanxiao <chenhanxiao(a)gmail.com>
---
src/libvirt_private.syms | 2 ++
src/qemu/qemu_hotplug.c | 51 +++++++++++++++++++++++++++++++-----------------
2 files changed, 35 insertions(+), 18 deletions(-)
diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms
index d5c3b9abb..31e83f152 100644
--- a/src/libvirt_private.syms
+++ b/src/libvirt_private.syms
@@ -203,6 +203,7 @@ virDomainChrConsoleTargetTypeToString;
virDomainChrDefForeach;
virDomainChrDefFree;
virDomainChrDefNew;
+virDomainChrDeviceTypeToString;
virDomainChrEquals;
virDomainChrFind;
virDomainChrGetDomainPtrs;
@@ -427,6 +428,7 @@ virDomainMemoryDefFree;
virDomainMemoryFindByDef;
virDomainMemoryFindInactiveByDef;
virDomainMemoryInsert;
+virDomainMemoryModelTypeToString;
virDomainMemoryRemove;
virDomainMemorySourceTypeFromString;
virDomainMemorySourceTypeToString;
diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c
index 7de04c85a..0fa3c54c0 100644
--- a/src/qemu/qemu_hotplug.c
+++ b/src/qemu/qemu_hotplug.c
@@ -3454,7 +3454,7 @@ qemuDomainChangeGraphics(virQEMUDriverPtr driver,
int ret = -1;
if (!olddev) {
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ virReportError(VIR_ERR_NO_DEVICE, "%s",
_("cannot find existing graphics device to modify"));
goto cleanup;
}
@@ -4743,7 +4743,7 @@ int qemuDomainDetachControllerDevice(virQEMUDriverPtr driver,
if ((idx = virDomainControllerFind(vm->def,
dev->data.controller->type,
dev->data.controller->idx)) < 0) {
- virReportError(VIR_ERR_OPERATION_FAILED,
+ virReportError(VIR_ERR_NO_DEVICE,
_("controller %s:%d not found"),
virDomainControllerTypeToString(dev->data.controller->type),
dev->data.controller->idx);
@@ -4972,18 +4972,18 @@ int qemuDomainDetachHostDevice(virQEMUDriverPtr driver,
if (idx < 0) {
switch (subsys->type) {
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI:
- virReportError(VIR_ERR_OPERATION_FAILED,
+ virReportError(VIR_ERR_NO_DEVICE,
_("host pci device %.4x:%.2x:%.2x.%.1x not found"),
pcisrc->addr.domain, pcisrc->addr.bus,
pcisrc->addr.slot, pcisrc->addr.function);
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB:
if (usbsrc->bus && usbsrc->device) {
- virReportError(VIR_ERR_OPERATION_FAILED,
+ virReportError(VIR_ERR_NO_DEVICE,
_("host usb device %03d.%03d not found"),
usbsrc->bus, usbsrc->device);
} else {
- virReportError(VIR_ERR_OPERATION_FAILED,
+ virReportError(VIR_ERR_NO_DEVICE,
_("host usb device vendor=0x%.4x product=0x%.4x not found"),
usbsrc->vendor, usbsrc->product);
}
@@ -4992,13 +4992,13 @@ int qemuDomainDetachHostDevice(virQEMUDriverPtr driver,
if (scsisrc->protocol ==
VIR_DOMAIN_HOSTDEV_SCSI_PROTOCOL_TYPE_ISCSI) {
virDomainHostdevSubsysSCSIiSCSIPtr iscsisrc = &scsisrc->u.iscsi;
- virReportError(VIR_ERR_OPERATION_FAILED,
+ virReportError(VIR_ERR_NO_DEVICE,
_("host scsi iSCSI path %s not found"),
iscsisrc->src->path);
} else {
virDomainHostdevSubsysSCSIHostPtr scsihostsrc =
&scsisrc->u.host;
- virReportError(VIR_ERR_OPERATION_FAILED,
+ virReportError(VIR_ERR_NO_DEVICE,
_("host scsi device %s:%u:%u.%llu not found"),
scsihostsrc->adapter, scsihostsrc->bus,
scsihostsrc->target, scsihostsrc->unit);
@@ -5036,8 +5036,10 @@ qemuDomainDetachShmemDevice(virQEMUDriverPtr driver,
qemuDomainObjPrivatePtr priv = vm->privateData;
if ((idx = virDomainShmemDefFind(vm->def, dev)) < 0) {
- virReportError(VIR_ERR_OPERATION_INVALID, "%s",
- _("device not present in domain configuration"));
+ virReportError(VIR_ERR_NO_DEVICE,
+ _("Shmem device of model '%s' not found "
+ "in domain configuration"),
+ virDomainShmemModelTypeToString(dev->model));
return -1;
}
@@ -5093,8 +5095,10 @@ qemuDomainDetachWatchdog(virQEMUDriverPtr driver,
watchdog->model == dev->model &&
watchdog->action == dev->action &&
virDomainDeviceInfoAddressIsEqual(&dev->info, &watchdog->info))) {
- virReportError(VIR_ERR_OPERATION_INVALID, "%s",
- _("watchdog device not present in domain configuration"));
+ virReportError(VIR_ERR_NO_DEVICE,
+ _("watchdog device of model '%s' is not "
+ "found in domain configuration"),
+ virDomainWatchdogModelTypeToString(watchdog->model));
return -1;
}
@@ -5134,8 +5138,13 @@ qemuDomainDetachNetDevice(virQEMUDriverPtr driver,
virDomainNetDefPtr detach = NULL;
qemuDomainObjPrivatePtr priv = vm->privateData;
- if ((detachidx = virDomainNetFindIdx(vm->def, dev->data.net)) < 0)
+ if ((detachidx = virDomainNetFindIdx(vm->def, dev->data.net)) < 0) {
+ char mac[VIR_MAC_STRING_BUFLEN];
+ virReportError(VIR_ERR_NO_DEVICE,
+ _("netdev '%s' not found in domain configuration"),
+ virMacAddrFormat(&dev->data.net->mac, mac));
goto cleanup;
+ }
detach = vm->def->nets[detachidx];
@@ -5321,8 +5330,10 @@ int qemuDomainDetachChrDevice(virQEMUDriverPtr driver,
char *devstr = NULL;
if (!(tmpChr = virDomainChrFind(vmdef, chr))) {
- virReportError(VIR_ERR_OPERATION_INVALID, "%s",
- _("device not present in domain configuration"));
+ virReportError(VIR_ERR_NO_DEVICE,
+ _("Chr device of type '%s' not found "
+ "in domain configuration"),
+ virDomainChrDeviceTypeToString(chr->deviceType));
goto cleanup;
}
@@ -5368,8 +5379,10 @@ qemuDomainDetachRNGDevice(virQEMUDriverPtr driver,
int ret = -1;
if ((idx = virDomainRNGFind(vm->def, rng)) < 0) {
- virReportError(VIR_ERR_OPERATION_INVALID, "%s",
- _("device not present in domain configuration"));
+ virReportError(VIR_ERR_NO_DEVICE,
+ _("RNG device of model '%s' not found "
+ "in domain configuration"),
+ virDomainRNGBackendTypeToString(rng->model));
return -1;
}
@@ -5411,8 +5424,10 @@ qemuDomainDetachMemoryDevice(virQEMUDriverPtr driver,
qemuDomainMemoryDeviceAlignSize(vm->def, memdef);
if ((idx = virDomainMemoryFindByDef(vm->def, memdef)) < 0) {
- virReportError(VIR_ERR_OPERATION_INVALID, "%s",
- _("device not present in domain configuration"));
+ virReportError(VIR_ERR_NO_DEVICE,
+ _("memory device of model '%s' not found "
+ "in domain configuration"),
+ virDomainMemoryModelTypeToString(memdef->model));
return -1;
}
--
2.14.3
6 years, 11 months
[libvirt] [PATCH V2] blockjob: Fix error checking of blockjob status
by Jie Wang
offset and len can also be equal to 0 on failed if blockjob return
status:"BLOCK_JOB_COMPLETED" with error:"File descriptor in bad state",
so it's better to make our decision based on whether 'error' is non-NULL.
---
src/qemu/qemu_monitor_json.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
index e45868b..ae64a5a 100644
--- a/src/qemu/qemu_monitor_json.c
+++ b/src/qemu/qemu_monitor_json.c
@@ -885,8 +885,7 @@ qemuMonitorJSONHandleBlockJobImpl(qemuMonitorPtr mon,
switch ((virConnectDomainEventBlockJobStatus) event) {
case VIR_DOMAIN_BLOCK_JOB_COMPLETED:
error = virJSONValueObjectGetString(data, "error");
- /* Make sure the whole device has been processed */
- if (offset != len)
+ if (error != NULL)
event = VIR_DOMAIN_BLOCK_JOB_FAILED;
break;
case VIR_DOMAIN_BLOCK_JOB_CANCELED:
--
1.8.3.1
6 years, 11 months
[libvirt] [PATCH v2 0/3] Storage pool common object fixes
by John Ferlan
v1: https://www.redhat.com/archives/libvir-list/2017-December/msg00543.html
Changes since v1...
* Added a patch to handle a NULL return with pool obj lock
* Alter the IsDuplicate API to use a bool parameter
* Use the IsDuplicate API from the test driver. This would have generated
the correct error message about a duplicate UUID instead of the Duplicate
key that was generated. Ran virt-manager tests prior to Cole's fixes and
of course after.
John Ferlan (3):
conf: Need to unlock pools on object allocation failure
conf: Use bool for @check_active parameter
test: Use virStoragePoolObjIsDuplicate for storage define/create
src/conf/virstorageobj.c | 4 ++--
src/conf/virstorageobj.h | 2 +-
src/storage/storage_driver.c | 4 ++--
src/test/test_driver.c | 11 ++++-------
4 files changed, 9 insertions(+), 12 deletions(-)
--
2.13.6
6 years, 11 months
[libvirt] [PATCH] rpc: remove redundant logic
by Pavel Hrdina
Introduced by commit <0eaa59dce1>. That comparison already returns
true or false.
Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com>
---
Pushed under trivial rule.
src/rpc/virnetserverclient.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/rpc/virnetserverclient.c b/src/rpc/virnetserverclient.c
index cae5375359..1f335d3b1e 100644
--- a/src/rpc/virnetserverclient.c
+++ b/src/rpc/virnetserverclient.c
@@ -1090,7 +1090,7 @@ virNetServerClientClose(virNetServerClientPtr client)
bool
virNetServerClientIsClosedLocked(virNetServerClientPtr client)
{
- return client->sock == NULL ? true : false;
+ return client->sock == NULL;
}
--
2.14.3
6 years, 11 months
[libvirt] [PATCH 0/4] Resolve issue with duplicated SCSI hostdev addresses
by John Ferlan
Details in the various patches.
John Ferlan (4):
qemu: Tolerate storage source private data being NULL for hotplug SCSI
hostdev
qemu: Use same model when adding hostdev SCSI controller
conf: Use existing SCSI hostdev model to create new
conf: Fix generating addresses for SCSI hostdev
src/conf/domain_conf.c | 44 ++++++++++++----------
src/qemu/qemu_hotplug.c | 19 +++++++---
.../hostdev-scsi-autogen-address.xml | 2 +-
3 files changed, 39 insertions(+), 26 deletions(-)
--
2.13.6
6 years, 11 months
[libvirt] Qemu Commandline options are ignored during migration
by Tim Foerster
Heyho Guys,
The domain defintion xml allows to extend the qemu command.
For example:
```
<qemu:commandline>
<qemu:arg value='-cpu'/>
<qemu:arg value='SandyBridge,-kvm_steal_time'/>
</qemu:commandline>
```
The options are correctly passed on startup, but the migration will
ignore them. The desination xml is dumped with the flags 1|2|8. (secure,
inactive and migrateable)
`secure` flag is required to keep vnc passwords, and inactive to keep
the metadata section. But i also mentioned that qemu:commandline section
needs inactive flag too.
--
Tim Foerster
6 years, 11 months
[libvirt] [PATCH] vhost-user: no need to remove chardev when remove netdev
by linzhecheng
We use virsh detach-device to hot-unplug a vhost-user net card,
and libvirtd will issue qmp_netdev_del, qmp_chardev_remove and
qmp_netdev_del. However, in qmp_netdev_del, qemu will remove
the chardev when cleanup the netdev. So libvirtd has no need to issue
qmp_chardev_remove to qemu any more.
Change-Id: I4883c17bbb8dce088406f6a8a9ca4e02612d21f4
diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c
index 7de04c85a..c4787dd60 100644
--- a/src/qemu/qemu_hotplug.c
+++ b/src/qemu/qemu_hotplug.c
@@ -4014,7 +4014,6 @@ qemuDomainRemoveNetDevice(virQEMUDriverPtr driver,
qemuDomainObjPrivatePtr priv = vm->privateData;
virObjectEventPtr event;
char *hostnet_name = NULL;
- char *charDevAlias = NULL;
size_t i;
int ret = -1;
int actualType = virDomainNetGetActualType(net);
@@ -4029,8 +4028,7 @@ qemuDomainRemoveNetDevice(virQEMUDriverPtr driver,
VIR_DEBUG("Removing network interface %s from domain %p %s",
net->info.alias, vm, vm->def->name);
- if (virAsprintf(&hostnet_name, "host%s", net->info.alias) < 0 ||
- !(charDevAlias = qemuAliasChardevFromDevAlias(net->info.alias)))
+ if (virAsprintf(&hostnet_name, "host%s", net->info.alias) < 0)
goto cleanup;
@@ -4057,15 +4055,6 @@ qemuDomainRemoveNetDevice(virQEMUDriverPtr driver,
}
}
- if (actualType == VIR_DOMAIN_NET_TYPE_VHOSTUSER) {
- /* vhostuser has a chardev too */
- if (qemuMonitorDetachCharDev(priv->mon, charDevAlias) < 0) {
- /* well, this is a messy situation. Guest visible PCI device has
- * been removed, netdev too but chardev not. The best seems to be
- * to just ignore the error and carry on.
- */
- }
- }
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
@@ -4108,7 +4097,6 @@ qemuDomainRemoveNetDevice(virQEMUDriverPtr driver,
cleanup:
virObjectUnref(cfg);
- VIR_FREE(charDevAlias);
VIR_FREE(hostnet_name);
return ret;
}
--
2.12.2.windows.2
6 years, 11 months
[libvirt] [PATCH 0/2] Introducing testDomainRename().
by Julio Faracco
This commit introduces the testDomainRename() for test driver. It includes:
- testDomainRename() implementation.
- Testcase script to test 'domrename' command.
Julio Faracco (2):
test: Implementing testDomainRename().
tests: Adding test case for virsh 'domrename' command.
src/test/test_driver.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++++++
tests/Makefile.am | 1 +
tests/virsh-rename | 43 ++++++++++++++++++++++
3 files changed, 140 insertions(+)
create mode 100755 tests/virsh-rename
--
2.7.4
6 years, 11 months
