August 2017 - Devel - libvirt List Archives

[libvirt] [PATCH 0/2] conf: check address type for USB hostdevs
by Ján Tomko 23 Aug '17

23 Aug '17

*** BRB HERE *** Ján Tomko (2): conf: move hostdev address validation to virDomainHostdevDefValidate conf: check address type for USB hostdevs src/conf/domain_conf.c | 83 ++++++++++++++++++++++++++++++++++---------------- 1 file changed, 56 insertions(+), 27 deletions(-) -- 2.13.0

2 3

[libvirt] [PATCH] vmx: do not treat controllers as implicit devices
by Ján Tomko 23 Aug '17

23 Aug '17

When parsing the config, we look for the SCSI controllers one by one, remembering their models, then let virDomainDefAddImplicitDevices add them if any SCSI disk is using them. Since these controllers are not really implicit (they are present in the source config), add them explicitly. This patch maintains the behavior of not adding a controller if it was present in the config, but no disk was using it. This also resolves the memory leak of virVMXParseConfig overwriting the video device added by calling virDomainDefAddImplicitDevices before the parsing is finished. Reported-by: Michal Privoznik <mprivozn(a)redhat.com> --- src/vmx/vmx.c | 32 ++++++++++++-------------------- 1 file changed, 12 insertions(+), 20 deletions(-) diff --git a/src/vmx/vmx.c b/src/vmx/vmx.c index 3e2f4c3e1..849cfc6b1 100644 --- a/src/vmx/vmx.c +++ b/src/vmx/vmx.c @@ -1650,6 +1650,18 @@ virVMXParseConfig(virVMXContext *ctx, if (def->disks[def->ndisks] != NULL) ++def->ndisks; } + + } + + /* add all the SCSI controllers we've seen, up until the last one that is + * currently used by a disk */ + if (def->ndisks != 0) { + virDomainDeviceInfoPtr info = &def->disks[def->ndisks - 1]->info; + for (controller = 0; controller <= info->addr.drive.controller; controller++) { + if (virDomainDefAddController(def, VIR_DOMAIN_CONTROLLER_TYPE_SCSI, + controller, scsi_virtualDev[controller]) < 0) + goto cleanup; + } } /* def:disks (ide) */ @@ -1689,26 +1701,6 @@ virVMXParseConfig(virVMXContext *ctx, ++def->ndisks; } - /* def:controllers */ - if (virDomainDefAddImplicitDevices(def) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("Could not add controllers")); - goto cleanup; - } - - for (controller = 0; controller < def->ncontrollers; ++controller) { - if (def->controllers[controller]->type == VIR_DOMAIN_CONTROLLER_TYPE_SCSI) { - if (def->controllers[controller]->idx > 3) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("SCSI controller index %d out of [0..3] range"), - def->controllers[controller]->idx); - goto cleanup; - } - - def->controllers[controller]->model = - scsi_virtualDev[def->controllers[controller]->idx]; - } - } - /* def:fss */ if (virVMXGetConfigBoolean(conf, "isolation.tools.hgfs.disable", &hgfs_disabled, true, true) < 0) { -- 2.13.0

2 1

[libvirt] [PATCH] tests: Fix leak in securityselinuxtest
by John Ferlan 23 Aug '17

23 Aug '17

If we jump to the error: label and @secbuf is allocated, then it's not free'd at all. Found by Coverity Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- tests/securityselinuxtest.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tests/securityselinuxtest.c b/tests/securityselinuxtest.c index f6bc07a..0ac2828 100644 --- a/tests/securityselinuxtest.c +++ b/tests/securityselinuxtest.c @@ -68,7 +68,7 @@ testBuildDomainDef(bool dynamic, const char *baselabel) { virDomainDefPtr def; - virSecurityLabelDefPtr secdef; + virSecurityLabelDefPtr secdef = NULL; if (!(def = virDomainDefNew())) goto error; @@ -98,6 +98,7 @@ testBuildDomainDef(bool dynamic, error: virDomainDefFree(def); + virSecurityLabelDefFree(secdef); return NULL; } -- 2.9.5

2 1

[libvirt] [PATCH 0/2] Yet another namespace fix, kinda
by Martin Kletzander 23 Aug '17

23 Aug '17

Fixing easy problem (patch 1) lead me to finding out that there is yet another problem that needs fixing (patch 2). For more information read the code. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1443434 Martin Kletzander (2): qemu: Don't mangle the storage format for type='dir' qemu: Also treat directories properly when using namespaces src/qemu/qemu_domain.c | 38 +++++++++++++++++++--- src/storage/storage_source.c | 5 +++ .../qemuxml2argv-floppy-drive-noformat.args | 24 ++++++++++++++ .../qemuxml2argv-floppy-drive-noformat.xml | 31 ++++++++++++++++++ tests/qemuxml2argvtest.c | 2 ++ 5 files changed, 95 insertions(+), 5 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-noformat.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-noformat.xml -- 2.14.1

2 5

[libvirt] [PATCH v2] vz: support disabled items in vz boot order
by Nikolay Shirokovskiy 23 Aug '17

23 Aug '17

At the time the check was written virtuozzo did not use disabled items in boot order configuration. Boot items were always enabled. Now they can be disabled as well. Supporting such items is easy - they just should be ignored. --- src/vz/vz_sdk.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/src/vz/vz_sdk.c b/src/vz/vz_sdk.c index 8ccd7ea..a6eb0dd 100644 --- a/src/vz/vz_sdk.c +++ b/src/vz/vz_sdk.c @@ -1736,11 +1736,8 @@ prlsdkConvertBootOrderVm(PRL_HANDLE sdkdom, virDomainDefPtr def) pret = PrlBootDev_IsInUse(bootDev, &inUse); prlsdkCheckRetGoto(pret, cleanup); - if (!inUse) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("Boot ordering with disabled items is not supported")); - goto cleanup; - } + if (!inUse) + continue; pret = PrlBootDev_GetSequenceIndex(bootDev, &bootIndex); prlsdkCheckRetGoto(pret, cleanup); -- 1.8.3.1

2 3

[libvirt] [PATCH 0/3] Add support for virtio-vga/gpu's max_outputs= parameter
by Martin Kletzander 23 Aug '17

23 Aug '17

The subject of this cover letter goes very nicely together with the subjects of the subsequent messages. I hope my literature teachers are proud of me. Martin Kletzander (3): qemu: Add capabilities for virtio-vga/gpu's max_outputs= parameter qemu: Add support for virtio-vga/gpu's max_outputs= parameter docs: Update news with virtio-vga/gpu's max_outputs= parameter docs/news.xml | 5 +++++ src/qemu/qemu_capabilities.c | 2 ++ src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 5 +++++ tests/qemucapabilitiesdata/caps_2.4.0.x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_2.5.0.x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_2.6.0-gicv2.aarch64.xml | 1 + tests/qemucapabilitiesdata/caps_2.6.0-gicv3.aarch64.xml | 1 + tests/qemucapabilitiesdata/caps_2.6.0.ppc64le.xml | 1 + tests/qemucapabilitiesdata/caps_2.6.0.x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_2.7.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.7.0.x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_2.8.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.8.0.x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_2.9.0.ppc64le.xml | 1 + tests/qemucapabilitiesdata/caps_2.9.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml | 1 + tests/qemuxml2argvdata/qemuxml2argv-video-virtio-vga.args | 2 +- tests/qemuxml2argvtest.c | 3 ++- 19 files changed, 29 insertions(+), 2 deletions(-) -- 2.14.1

2 4

[libvirt] [PATCH] docs: Define anchors correctly in pci-hotplug
by Andrea Bolognani 23 Aug '17

23 Aug '17

HTML5 obsoletes the 'name' attribute in favor of 'id', and our TOC generator apparently follows the recommendation to the letter, resulting in a broken TOC if you use the old-school attribute. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- Pushed as trivial. docs/pci-hotplug.html.in | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/docs/pci-hotplug.html.in b/docs/pci-hotplug.html.in index cddc6f81b..6e0648ee2 100644 --- a/docs/pci-hotplug.html.in +++ b/docs/pci-hotplug.html.in @@ -33,9 +33,9 @@ types, hence the way it's organized. </p> - <h2><a name="x86_64">x86_64 architecture</a></h2> + <h2><a id="x86_64">x86_64 architecture</a></h2> - <h3><a name="x86_64-q35">q35 machine type</a></h3> + <h3><a id="x86_64-q35">q35 machine type</a></h3> <p> This is a PCI Express native machine type. The default PCI topology @@ -104,7 +104,7 @@ from 0x01 to 0x1f of the <code>pci-bridge</code> controller. </p> - <h3><a name="x86_64-i440fx">i440fx (pc) machine type</a></h3> + <h3><a id="x86_64-i440fx">i440fx (pc) machine type</a></h3> <p> This is a legacy PCI native machine type. The default PCI @@ -121,9 +121,9 @@ assigned from the guest. </p> - <h2><a name="ppc64">ppc64 architecture</a></h2> + <h2><a id="ppc64">ppc64 architecture</a></h2> - <h3><a name="ppc64-pseries">pseries machine type</a></h3> + <h3><a id="ppc64-pseries">pseries machine type</a></h3> <p> The default PCI topology for the <code>pseries</code> machine @@ -162,9 +162,9 @@ from the host. </p> - <h2><a name="aarch64">aarch64 architecture</a></h2> + <h2><a id="aarch64">aarch64 architecture</a></h2> - <h3><a name="aarch64-virt">mach-virt (virt) machine type</a></h3> + <h3><a id="aarch64-virt">mach-virt (virt) machine type</a></h3> <p> This machine type mostly behaves the same as the -- 2.13.5

1 0

[libvirt] [PATCH v2] qemu: command: align disk serial check to schema
by Nikolay Shirokovskiy 23 Aug '17

23 Aug '17

Disk serial schema has extra '.+' allowed characters in comparison with check in code. Looks like there is no reason for that as qemu allows any character AFAIK for serial. This discrepancy is originated in 85d15b51 where ability to add serial was added. --- Diff from v1: * fix xml2argv disk serial test to use all valid chars Looks like there is no existing infrastructure to test every invalid character. src/qemu/qemu_command.c | 2 +- tests/qemuxml2argvdata/qemuxml2argv-disk-serial.args | 2 +- tests/qemuxml2argvdata/qemuxml2argv-disk-serial.xml | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index c76f923..c5369b0 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -432,7 +432,7 @@ qemuBuildIoEventFdStr(virBufferPtr buf, } #define QEMU_SERIAL_PARAM_ACCEPTED_CHARS \ - "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789-_ " + "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789-_ .+" static int qemuSafeSerialParamValue(const char *value) diff --git a/tests/qemuxml2argvdata/qemuxml2argv-disk-serial.args b/tests/qemuxml2argvdata/qemuxml2argv-disk-serial.args index 2cefdca..fa0fc93 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-disk-serial.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-disk-serial.args @@ -18,6 +18,6 @@ QEMU_AUDIO_DRV=none \ -boot c \ -usb \ -drive 'file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-1,\ -serial=\ \ WD-WMAP9A966149' \ +serial=abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789-_\ .+' \ -device ide-drive,bus=ide.0,unit=1,drive=drive-ide0-0-1,id=ide0-0-1 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-disk-serial.xml b/tests/qemuxml2argvdata/qemuxml2argv-disk-serial.xml index 565462e..d54d73b 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-disk-serial.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-disk-serial.xml @@ -17,7 +17,7 @@ <disk type='block' device='disk'> <source dev='/dev/HostVG/QEMUGuest1'/> <target dev='hda' bus='ide'/> - <serial> WD-WMAP9A966149</serial> + <serial>abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789-_ .+</serial> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0'/> -- 1.8.3.1

2 3

[libvirt] [PATCH v4 00/17] virObject adjustments for common object
by John Ferlan 22 Aug '17

22 Aug '17

v3: https://www.redhat.com/archives/libvir-list/2017-June/msg00916.html Changes since v3 - honestly it's been too long to remember exactly what changes have taken place. This series provide the util/virobject changes and the implementation for nodedev, secret, interface, and network drivers/vir*obj's. The nwfilter is awaiting more upstream review and work and some more Storage Pool/Volume patches will be posted in conjunction with these. These changes also use the rwlocks Michal recently added to virobject as the means to provide locks for the LookupHash table(s). Although I understand it's not the preference of one reviewer, I've kept with the virObject model. If that still doesn't pass muster and someone else wants to create some other mechanism to combine the existing drivers in a more sane manner, then have at it. This is the model I've chosen. I personally don't see the value in just a shim API. This set of patches moves away from using a strict "uuid/name" designation in favor of using "key1" and "key2". While some may find that "too generic", I think that's the whole purpose of it. After some soul searching I feel using "name" or "uuid" is too restrictive and lends more towards the shim API model. Besides for some consumers they don't have a uuid (nodedev, interface, and nwfilter). In the long run it doesn't matter whether it's a uuid, name, or whatever as long as it's a character string. FWIW: Patches 1, 12, and 16 could be easily separated out, but since I was working in the area - they were added here as well. John Ferlan (17): util: Use VIR_ERROR instead of VIR_WARN util: Introduce virObjectLookupKeys util: Introduce virObjectLookupHash util: Introduce virObjectLookupKeys*Active API's util: Introduce virObjectLookupHash{Add|Remove} util: Introduce virObjectLookupHashFind[Locked] util: Introduce virObjectLookupHashForEach util: Introduce virObjectLookupHashSearch[Locked] nodedev: Use virObjectLookup{Keys|Hash} secret: Use virObjectLookup{Keys|Hash} util: Introduce virObjectLookupHashClone Revert "interface: Consume @def in virInterfaceObjNew" interface: Use virObjectLookup{Keys|Hash} test: Clean up test driver Interface interactions util: Introduce virObjectLookupHashPrune network: Fix virNetworkObjBridgeInUse return type network: Use virObjectLookup{Keys|Hash} src/conf/virinterfaceobj.c | 301 ++++++++++---------- src/conf/virnetworkobj.c | 293 ++++++-------------- src/conf/virnetworkobj.h | 5 +- src/conf/virnodedeviceobj.c | 286 ++++++------------- src/conf/virsecretobj.c | 263 +++++------------- src/libvirt_private.syms | 15 + src/test/test_driver.c | 55 +--- src/util/virobject.c | 658 +++++++++++++++++++++++++++++++++++++++++++- src/util/virobject.h | 119 ++++++++ tests/networkxml2conftest.c | 4 +- 10 files changed, 1190 insertions(+), 809 deletions(-) -- 2.9.4

2 21

[libvirt] [PATCHv2 0/3] conf: do not count per-device boot elements when parsing <os><boot>
by Ján Tomko 22 Aug '17

22 Aug '17

Ján Tomko (3): conf: rename virDomain*PostParseInternal to virDomain*PostParseCommon conf: create a thin wrapper above virDomainDefPostParse conf: do not count per-device boot elements when parsing <os><boot> src/conf/domain_conf.c | 82 +++++++++++++++++++++++++++----------------------- 1 file changed, 45 insertions(+), 37 deletions(-) -- 2.13.0

2 6