June 2016 - Devel - libvirt List Archives

[libvirt] [PATCH] qemu: Shorten domain name for watchdog coredump
by Martin Kletzander 16 Jun '16

16 Jun '16

Similarly to commit d294f6b0dff7, if the name is long enough, the filename can be longer than filesystem's limit. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1334237 Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- src/qemu/qemu_driver.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index efb3f854fb10..80d1d209a80c 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -3906,6 +3906,10 @@ static void processWatchdogEvent(virQEMUDriverPtr driver, virDomainObjPtr vm, in { int ret; virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver); + char *domname = virDomainObjGetShortName(vm); + + if (!domname) + goto cleanup; switch (action) { case VIR_DOMAIN_WATCHDOG_ACTION_DUMP: @@ -3915,7 +3919,7 @@ static void processWatchdogEvent(virQEMUDriverPtr driver, virDomainObjPtr vm, in if (virAsprintf(&dumpfile, "%s/%s-%u", cfg->autoDumpPath, - vm->def->name, + domname, (unsigned int)time(NULL)) < 0) goto cleanup; @@ -3959,6 +3963,7 @@ static void processWatchdogEvent(virQEMUDriverPtr driver, virDomainObjPtr vm, in qemuDomainObjEndAsyncJob(driver, vm); cleanup: + VIR_FREE(domname); virObjectUnref(cfg); } -- 2.8.4

2 2

[libvirt] [PATCH] logging: remove concept of default log priority
by Daniel P. Berrange 16 Jun '16

16 Jun '16

The logging framework has categories which can be selectively enabled/disabled by setting a suitable LIBVIRT_LOG_FILTERS environment variable or config file setting. Along side that we also have the LIBVIRT_DEBUG environment variable which unconditionally enables every single category at DEBUG level. With the amount of logging produced by libvirt these days, the signal/noise ratio in the output from setting LIBVIRT_DEBUG is to poor for it to be useful. Originally the LIBVIRT_DEBUG env variable had a very specific use case - it resulted in logging of anything in our public API entrypoints. eg it turned on src/libvirt.c debugging and nothing else. Additionally it would always result in log messages being sent to stderr. When applied to any of the daemons, the log output no longers gets sent to stderr, but rather to whatever default log output has been configured by the daemon. If no log_outputs setting or LIBVIRT_LOG_OUTPUTS env is set, then messages will often go to the systemd journal or a /var/log/libvirt/libvirtd.log file rather than stderr. These factors have conspired to make the LIBVIRT_DEBUG env and/or default log priority to be pretty useless in the real world. This change attempts to take us back towards the original semantics of the LIBVIRT_DEBUG env variable as follows. If LIBVIRT_DEBUG is set to a plain integer, or log level string, then it will turn on logging for the "libvirt" log category at that level. Any other string will be parsed in the same way as LIBVIRT_LOG_FILTERS would be. In all cases use of LIBVIRT_DEBUG will result in an explicit output being added for stderr. This ensures that messages always go to stderr, even if other outputs are already configured. IOW, LIBVIRT_DEBUG=1 virsh or LIBVIRT_DEBUG=1 libvirtd will both result in printing logs of libvirt public API calls to stderr. Meanwhile setting LIBVIRT_DEBUG="1:qemu" is equivalent to setting LIBVIRT_LOG_FILTERS="1:qemu" and LIBVIRT_LOG_OUTPUTS="1:stderr" Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> --- daemon/libvirtd.c | 27 ++++++------ src/libvirt_private.syms | 1 + src/libxl/libxl_conf.c | 3 +- src/locking/lock_daemon.c | 29 ++++++------- src/logging/log_daemon.c | 29 ++++++------- src/lxc/lxc_process.c | 7 ---- src/util/vircommand.c | 4 -- src/util/virlog.c | 104 +++++++++++++++++++--------------------------- src/util/virlog.h | 11 ++--- tests/eventtest.c | 6 +-- 10 files changed, 97 insertions(+), 124 deletions(-) diff --git a/daemon/libvirtd.c b/daemon/libvirtd.c index cc5190f..e88a982 100644 --- a/daemon/libvirtd.c +++ b/daemon/libvirtd.c @@ -668,6 +668,8 @@ daemonSetupLogging(struct daemonConfig *config, bool verbose, bool godaemon) { + int level = VIR_LOG_WARN; + virLogReset(); /* @@ -684,9 +686,6 @@ daemonSetupLogging(struct daemonConfig *config, * level has been set, we must process variables in the opposite * order, each one overriding the previous. */ - if (config->log_level != 0) - virLogSetDefaultPriority(config->log_level); - virLogSetFromEnv(); if (virLogGetNbFilters() == 0) @@ -695,11 +694,14 @@ daemonSetupLogging(struct daemonConfig *config, if (virLogGetNbOutputs() == 0) virLogParseOutputs(config->log_outputs); - /* - * Command line override for --verbose - */ - if ((verbose) && (virLogGetDefaultPriority() > VIR_LOG_INFO)) - virLogSetDefaultPriority(VIR_LOG_INFO); + if (config->log_level != 0 || verbose) { + level = config->log_level; + if (verbose && level > VIR_LOG_INFO) + level = VIR_LOG_INFO; + virLogDefineFilter("libvirt", level, 0); + if (virLogGetNbOutputs() == 0) + virLogParseOutputs("1:stderr"); + } /* * If no defined outputs, and either running @@ -711,7 +713,7 @@ daemonSetupLogging(struct daemonConfig *config, (godaemon || !isatty(STDIN_FILENO))) { char *tmp; if (access("/run/systemd/journal/socket", W_OK) >= 0) { - virLogPriority priority = virLogGetDefaultPriority(); + virLogPriority priority = level; /* By default we don't want to log too much stuff into journald as * it may employ rate limiting and thus block libvirt execution. */ @@ -735,8 +737,7 @@ daemonSetupLogging(struct daemonConfig *config, if (godaemon) { if (privileged) { if (virAsprintf(&tmp, "%d:file:%s/log/libvirt/libvirtd.log", - virLogGetDefaultPriority(), - LOCALSTATEDIR) == -1) + level, LOCALSTATEDIR) == -1) goto error; } else { char *logdir = virGetUserCacheDirectory(); @@ -753,14 +754,14 @@ daemonSetupLogging(struct daemonConfig *config, umask(old_umask); if (virAsprintf(&tmp, "%d:file:%s/libvirtd.log", - virLogGetDefaultPriority(), logdir) == -1) { + level, logdir) == -1) { VIR_FREE(logdir); goto error; } VIR_FREE(logdir); } } else { - if (virAsprintf(&tmp, "%d:stderr", virLogGetDefaultPriority()) < 0) + if (virAsprintf(&tmp, "%d:stderr", level) < 0) goto error; } virLogParseOutputs(tmp); diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index a980a32..5586d8b 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -1801,6 +1801,7 @@ virLogProbablyLogMessage; virLogReset; virLogSetDefaultPriority; virLogSetFromEnv; +virLogSourceGetPriority; virLogUnlock; virLogVMessage; diff --git a/src/libxl/libxl_conf.c b/src/libxl/libxl_conf.c index d927b37..51d6037 100644 --- a/src/libxl/libxl_conf.c +++ b/src/libxl/libxl_conf.c @@ -52,6 +52,7 @@ #define VIR_FROM_THIS VIR_FROM_LIBXL VIR_LOG_INIT("libxl.libxl_conf"); +VIR_LOG_INIT_FULL("libxl.libxl_context", virLogLibXL); /* see xen-unstable.hg/xen/include/asm-x86/cpufeature.h */ #define LIBXL_X86_FEATURE_PAE_MASK 0x40 @@ -1724,7 +1725,7 @@ libxlDriverConfigNew(void) } VIR_FREE(log_file); - switch (virLogGetDefaultPriority()) { + switch (virLogSourceGetPriority(&virLogLibXL)) { case VIR_LOG_DEBUG: log_level = XTL_DEBUG; break; diff --git a/src/locking/lock_daemon.c b/src/locking/lock_daemon.c index f889a34..426fe6b 100644 --- a/src/locking/lock_daemon.c +++ b/src/locking/lock_daemon.c @@ -454,6 +454,8 @@ virLockDaemonSetupLogging(virLockDaemonConfigPtr config, bool verbose, bool godaemon) { + int level = VIR_LOG_WARN; + virLogReset(); /* @@ -470,9 +472,6 @@ virLockDaemonSetupLogging(virLockDaemonConfigPtr config, * level has been set, we must process variables in the opposite * order, each one overriding the previous. */ - if (config->log_level != 0) - virLogSetDefaultPriority(config->log_level); - virLogSetFromEnv(); if (virLogGetNbFilters() == 0) @@ -481,6 +480,15 @@ virLockDaemonSetupLogging(virLockDaemonConfigPtr config, if (virLogGetNbOutputs() == 0) virLogParseOutputs(config->log_outputs); + if (config->log_level != 0 || verbose) { + level = config->log_level; + if (verbose && level > VIR_LOG_INFO) + level = VIR_LOG_INFO; + virLogDefineFilter("libvirt", level, 0); + if (virLogGetNbOutputs() == 0) + virLogParseOutputs("1:stderr"); + } + /* * If no defined outputs, and either running * as daemon or not on a tty, then first try @@ -491,7 +499,7 @@ virLockDaemonSetupLogging(virLockDaemonConfigPtr config, (godaemon || !isatty(STDIN_FILENO))) { char *tmp; if (access("/run/systemd/journal/socket", W_OK) >= 0) { - if (virAsprintf(&tmp, "%d:journald", virLogGetDefaultPriority()) < 0) + if (virAsprintf(&tmp, "%d:journald", level) < 0) goto error; virLogParseOutputs(tmp); VIR_FREE(tmp); @@ -508,8 +516,7 @@ virLockDaemonSetupLogging(virLockDaemonConfigPtr config, if (godaemon) { if (privileged) { if (virAsprintf(&tmp, "%d:file:%s/log/libvirt/virtlockd.log", - virLogGetDefaultPriority(), - LOCALSTATEDIR) == -1) + level, LOCALSTATEDIR) == -1) goto error; } else { char *logdir = virGetUserCacheDirectory(); @@ -527,26 +534,20 @@ virLockDaemonSetupLogging(virLockDaemonConfigPtr config, umask(old_umask); if (virAsprintf(&tmp, "%d:file:%s/virtlockd.log", - virLogGetDefaultPriority(), logdir) == -1) { + level, logdir) == -1) { VIR_FREE(logdir); goto error; } VIR_FREE(logdir); } } else { - if (virAsprintf(&tmp, "%d:stderr", virLogGetDefaultPriority()) < 0) + if (virAsprintf(&tmp, "%d:stderr", level) < 0) goto error; } virLogParseOutputs(tmp); VIR_FREE(tmp); } - /* - * Command line override for --verbose - */ - if ((verbose) && (virLogGetDefaultPriority() > VIR_LOG_INFO)) - virLogSetDefaultPriority(VIR_LOG_INFO); - return 0; error: diff --git a/src/logging/log_daemon.c b/src/logging/log_daemon.c index 90f8427..f344ba2 100644 --- a/src/logging/log_daemon.c +++ b/src/logging/log_daemon.c @@ -377,6 +377,8 @@ virLogDaemonSetupLogging(virLogDaemonConfigPtr config, bool verbose, bool godaemon) { + int level = VIR_LOG_WARN; + virLogReset(); /* @@ -393,9 +395,6 @@ virLogDaemonSetupLogging(virLogDaemonConfigPtr config, * level has been set, we must process variables in the opposite * order, each one overriding the previous. */ - if (config->log_level != 0) - virLogSetDefaultPriority(config->log_level); - virLogSetFromEnv(); if (virLogGetNbFilters() == 0) @@ -404,6 +403,15 @@ virLogDaemonSetupLogging(virLogDaemonConfigPtr config, if (virLogGetNbOutputs() == 0) virLogParseOutputs(config->log_outputs); + if (config->log_level != 0 || verbose) { + level = config->log_level; + if (verbose && level > VIR_LOG_INFO) + level = VIR_LOG_INFO; + virLogDefineFilter("libvirt", level, 0); + if (virLogGetNbOutputs() == 0) + virLogParseOutputs("1:stderr"); + } + /* * If no defined outputs, and either running * as daemon or not on a tty, then first try @@ -414,7 +422,7 @@ virLogDaemonSetupLogging(virLogDaemonConfigPtr config, (godaemon || !isatty(STDIN_FILENO))) { char *tmp; if (access("/run/systemd/journal/socket", W_OK) >= 0) { - if (virAsprintf(&tmp, "%d:journald", virLogGetDefaultPriority()) < 0) + if (virAsprintf(&tmp, "%d:journald", level) < 0) goto error; virLogParseOutputs(tmp); VIR_FREE(tmp); @@ -431,8 +439,7 @@ virLogDaemonSetupLogging(virLogDaemonConfigPtr config, if (godaemon) { if (privileged) { if (virAsprintf(&tmp, "%d:file:%s/log/libvirt/virtlogd.log", - virLogGetDefaultPriority(), - LOCALSTATEDIR) == -1) + level, LOCALSTATEDIR) == -1) goto error; } else { char *logdir = virGetUserCacheDirectory(); @@ -450,26 +457,20 @@ virLogDaemonSetupLogging(virLogDaemonConfigPtr config, umask(old_umask); if (virAsprintf(&tmp, "%d:file:%s/virtlogd.log", - virLogGetDefaultPriority(), logdir) == -1) { + level, logdir) == -1) { VIR_FREE(logdir); goto error; } VIR_FREE(logdir); } } else { - if (virAsprintf(&tmp, "%d:stderr", virLogGetDefaultPriority()) < 0) + if (virAsprintf(&tmp, "%d:stderr", level) < 0) goto error; } virLogParseOutputs(tmp); VIR_FREE(tmp); } - /* - * Command line override for --verbose - */ - if ((verbose) && (virLogGetDefaultPriority() > VIR_LOG_INFO)) - virLogSetDefaultPriority(VIR_LOG_INFO); - return 0; error: diff --git a/src/lxc/lxc_process.c b/src/lxc/lxc_process.c index 8981d9a..9fca007 100644 --- a/src/lxc/lxc_process.c +++ b/src/lxc/lxc_process.c @@ -918,9 +918,6 @@ virLXCProcessBuildControllerCmd(virLXCDriverPtr driver, /* The controller may call ip command, so we have to retain PATH. */ virCommandAddEnvPassBlockSUID(cmd, "PATH", "/bin:/usr/bin"); - virCommandAddEnvFormat(cmd, "LIBVIRT_DEBUG=%d", - virLogGetDefaultPriority()); - if (virLogGetNbFilters() > 0) { filterstr = virLogGetFilters(); if (!filterstr) { @@ -943,10 +940,6 @@ virLXCProcessBuildControllerCmd(virLXCDriverPtr driver, virCommandAddEnvPair(cmd, "LIBVIRT_LOG_OUTPUTS", outputstr); VIR_FREE(outputstr); } - } else { - virCommandAddEnvFormat(cmd, - "LIBVIRT_LOG_OUTPUTS=%d:stderr", - virLogGetDefaultPriority()); } virCommandAddArgList(cmd, "--name", vm->def->name, NULL); diff --git a/src/util/vircommand.c b/src/util/vircommand.c index 027cb64..07cd005 100644 --- a/src/util/vircommand.c +++ b/src/util/vircommand.c @@ -342,8 +342,6 @@ virFork(void) } else { /* child process */ - - int logprio; size_t i; /* Remove any error callback so errors in child now get sent @@ -354,9 +352,7 @@ virFork(void) /* Make sure any hook logging is sent to stderr, since child * process may close the logfile FDs */ - logprio = virLogGetDefaultPriority(); virLogReset(); - virLogSetDefaultPriority(logprio); /* Clear out all signal handlers from parent so nothing * unexpected can happen in our child once we unblock diff --git a/src/util/virlog.c b/src/util/virlog.c index 738eaac..82fb4dc 100644 --- a/src/util/virlog.c +++ b/src/util/virlog.c @@ -112,11 +112,6 @@ typedef virLogOutput *virLogOutputPtr; static virLogOutputPtr virLogOutputs; static int virLogNbOutputs; -/* - * Default priorities - */ -static virLogPriority virLogDefaultPriority = VIR_LOG_DEFAULT; - static int virLogResetFilters(void); static int virLogResetOutputs(void); static void virLogOutputToFd(virLogSourcePtr src, @@ -175,7 +170,6 @@ virLogOnceInit(void) return -1; virLogLock(); - virLogDefaultPriority = VIR_LOG_DEFAULT; if (VIR_ALLOC_QUIET(virLogRegex) >= 0) { if (regcomp(virLogRegex, VIR_LOG_REGEX, REG_EXTENDED) != 0) @@ -205,35 +199,10 @@ virLogReset(void) virLogLock(); virLogResetFilters(); virLogResetOutputs(); - virLogDefaultPriority = VIR_LOG_DEFAULT; virLogUnlock(); return 0; } -/** - * virLogSetDefaultPriority: - * @priority: the default priority level - * - * Set the default priority level, i.e. any logged data of a priority - * equal or superior to this level will be logged, unless a specific rule - * was defined for the log category of the message. - * - * Returns 0 if successful, -1 in case of error. - */ -int -virLogSetDefaultPriority(virLogPriority priority) -{ - if ((priority < VIR_LOG_DEBUG) || (priority > VIR_LOG_ERROR)) { - VIR_WARN("Ignoring invalid log level setting."); - return -1; - } - if (virLogInitialize() < 0) - return -1; - - virLogDefaultPriority = priority; - return 0; -} - /** * virLogResetFilters: @@ -472,7 +441,7 @@ virLogSourceUpdate(virLogSourcePtr source) { virLogLock(); if (source->serial < virLogFiltersSerial) { - unsigned int priority = virLogDefaultPriority; + unsigned int priority = VIR_LOG_DEFAULT; unsigned int flags = 0; size_t i; @@ -1310,18 +1279,6 @@ virLogParseFilters(const char *filters) /** - * virLogGetDefaultPriority: - * - * Returns the current logging priority level. - */ -virLogPriority -virLogGetDefaultPriority(void) -{ - return virLogDefaultPriority; -} - - -/** * virLogGetFilters: * * Returns a string listing the current filters, in the format originally @@ -1423,35 +1380,53 @@ virLogGetNbOutputs(void) /** - * virLogParseDefaultPriority: + * virLogParseDebug: * @priority: string defining the desired logging level * - * Parses and sets the default log priority level. It can take a string or - * number corresponding to the following levels: + * This method is a shortcut for setting a filter + * along with output to stderr. + * + * It can take one of the following strings or numbers: + * * 1: DEBUG * 2: INFO * 3: WARNING * 4: ERROR * + * in which case it will set the priority level on the + * "libvirt" log source filter. If it does not match any + * of these standard strings it will be treated as a full + * filter string. + * + * In all cases an output to stderr will be defined. + * * Returns 0 if successful, -1 in case of error. */ int -virLogParseDefaultPriority(const char *priority) +virLogParseDebug(const char *debug) { - int ret = -1; + unsigned int priority = VIR_LOG_DEFAULT; + if (STREQ(debug, "1") || STREQ(debug, "debug")) + priority = VIR_LOG_DEBUG; + else if (STREQ(debug, "2") || STREQ(debug, "info")) + priority = VIR_LOG_INFO; + else if (STREQ(debug, "3") || STREQ(debug, "warning")) + priority = VIR_LOG_WARN; + else if (STREQ(debug, "4") || STREQ(debug, "error")) + priority = VIR_LOG_ERROR; + + if (priority == VIR_LOG_DEFAULT) { + if (virLogParseFilters(debug) < 0) + return -1; + } else { + if (virLogDefineFilter("libvirt", priority, 0) < 0) + return -1; + } - if (STREQ(priority, "1") || STREQ(priority, "debug")) - ret = virLogSetDefaultPriority(VIR_LOG_DEBUG); - else if (STREQ(priority, "2") || STREQ(priority, "info")) - ret = virLogSetDefaultPriority(VIR_LOG_INFO); - else if (STREQ(priority, "3") || STREQ(priority, "warning")) - ret = virLogSetDefaultPriority(VIR_LOG_WARN); - else if (STREQ(priority, "4") || STREQ(priority, "error")) - ret = virLogSetDefaultPriority(VIR_LOG_ERROR); - else - VIR_WARN("Ignoring invalid log level setting"); + if (virLogParseOutputs("1:stderr") < 0) + return -1; - return ret; + return 0; } @@ -1471,7 +1446,7 @@ virLogSetFromEnv(void) debugEnv = virGetEnvAllowSUID("LIBVIRT_DEBUG"); if (debugEnv && *debugEnv) - virLogParseDefaultPriority(debugEnv); + virLogParseDebug(debugEnv); debugEnv = virGetEnvAllowSUID("LIBVIRT_LOG_FILTERS"); if (debugEnv && *debugEnv) virLogParseFilters(debugEnv); @@ -1495,3 +1470,10 @@ bool virLogProbablyLogMessage(const char *str) ret = true; return ret; } + + +int virLogSourceGetPriority(virLogSourcePtr source) +{ + virLogSourceUpdate(source); + return source->priority; +} diff --git a/src/util/virlog.h b/src/util/virlog.h index 3ad00d4..aace409 100644 --- a/src/util/virlog.h +++ b/src/util/virlog.h @@ -73,13 +73,14 @@ struct _virLogSource { * log statements in a file are conditionally disabled * at compile time due to configure options. */ -# define VIR_LOG_INIT(n) \ - static ATTRIBUTE_UNUSED virLogSource virLogSelf = { \ +# define VIR_LOG_INIT_FULL(n, _var) \ + static ATTRIBUTE_UNUSED virLogSource _var = { \ .name = "" n "", \ .priority = VIR_LOG_ERROR, \ .serial = 0, \ .flags = 0, \ }; +# define VIR_LOG_INIT(n) VIR_LOG_INIT_FULL(n, virLogSelf) /* * If configured with --enable-debug=yes then library calls @@ -174,8 +175,6 @@ int virLogGetNbFilters(void); int virLogGetNbOutputs(void); char *virLogGetFilters(void); char *virLogGetOutputs(void); -virLogPriority virLogGetDefaultPriority(void); -int virLogSetDefaultPriority(virLogPriority priority); void virLogSetFromEnv(void); int virLogDefineFilter(const char *match, virLogPriority priority, @@ -195,7 +194,7 @@ int virLogDefineOutput(virLogOutputFunc f, void virLogLock(void); void virLogUnlock(void); int virLogReset(void); -int virLogParseDefaultPriority(const char *priority); +int virLogParseDebug(const char *debug); int virLogParseFilters(const char *filters); int virLogParseOutputs(const char *output); int virLogPriorityFromSyslog(int priority); @@ -217,4 +216,6 @@ void virLogVMessage(virLogSourcePtr source, bool virLogProbablyLogMessage(const char *str); +int virLogSourceGetPriority(virLogSourcePtr source); + #endif diff --git a/tests/eventtest.c b/tests/eventtest.c index c4be606..0a31672 100644 --- a/tests/eventtest.c +++ b/tests/eventtest.c @@ -310,11 +310,7 @@ mymain(void) if (virThreadInitialize() < 0) return EXIT_FAILURE; - char *debugEnv = getenv("LIBVIRT_DEBUG"); - if (debugEnv && *debugEnv && (virLogParseDefaultPriority(debugEnv) == -1)) { - fprintf(stderr, "Invalid log level setting.\n"); - return EXIT_FAILURE; - } + virLogSetFromEnv(); virEventPollInit(); -- 2.5.5

4 5

[libvirt] [PATCH] A word error about net-dumpxml --inactive
by sannyshao 16 Jun '16

16 Jun '16

--- tools/virsh-network.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/virsh-network.c b/tools/virsh-network.c index 5abcda3..fcf1f0b 100644 --- a/tools/virsh-network.c +++ b/tools/virsh-network.c @@ -282,7 +282,7 @@ static const vshCmdOptDef opts_network_dumpxml[] = { VIRSH_COMMON_OPT_NETWORK, {.name = "inactive", .type = VSH_OT_BOOL, - .help = N_("network information of an inactive domain") + .help = N_("network information of an inactive network") }, {.name = NULL} }; -- 1.8.3.1

2 1

[libvirt] [PATCH v2 0/6] Some patches for native TLS encrypted chardev TCP support
by John Ferlan 16 Jun '16

16 Jun '16

v1: http://www.redhat.com/archives/libvir-list/2016-June/msg00824.html Based on Dan's review from patch 4, alter the methodology to use the libvirt qemu config file to add support for a 'default' and (at first) a 'chartcp' (I could use chardev, but I was concerned that would imply more options - udp, unix, etc.). I have started on the authentication portion of this (e.g. a passwordid= parameter pointing at a secret object), but I'm a bit held up by the need to have the secret key patches. I've separated those out and will post a separate set shortly as well to hopefully get some traction. For the chartcp, I went with the 'default' location for the /etc/pki path - that will at least test patch 1. I also tested those locally by removing the code in qemuxml2xmltest.c to specify the specific -vnc or -spice paths as the test has. John Ferlan (6): conf: Add new default TLS X.509 certificate default directory conf: Introduce chartcp_tls_x509_cert_dir qemu: Make qemuBuildShmemBackendStr private qemu: Add cfg pointer to various command line helpers qemu: Add support for TLS X.509 path to TCP chardev backend qemu: Add the ability to hotplug the TLS X.509 environment src/conf/domain_conf.h | 1 + src/qemu/libvirtd_qemu.aug | 9 +- src/qemu/qemu.conf | 52 ++++--- src/qemu/qemu_command.c | 158 ++++++++++++++++++--- src/qemu/qemu_command.h | 12 +- src/qemu/qemu_conf.c | 45 +++++- src/qemu/qemu_conf.h | 5 + src/qemu/qemu_hotplug.c | 29 +++- src/qemu/qemu_monitor_json.c | 9 ++ src/qemu/test_libvirtd_qemu.aug.in | 3 + .../qemuxml2argv-serial-tcp-tlsx509-chardev.args | 33 +++++ .../qemuxml2argv-serial-tcp-tlsx509-chardev.xml | 41 ++++++ tests/qemuxml2argvtest.c | 6 + .../qemuxml2xmlout-serial-tcp-tlsx509-chardev.xml | 50 +++++++ tests/qemuxml2xmltest.c | 1 + 15 files changed, 399 insertions(+), 55 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-tcp-tlsx509-chardev.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-tcp-tlsx509-chardev.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-serial-tcp-tlsx509-chardev.xml -- 2.5.5

2 13

[libvirt] [PATCH 0/2] qemu: active blockjob error tweaks
by Cole Robinson 16 Jun '16

16 Jun '16

Just a couple error message tweaks/cleanups regarding active block jobs, noticed while looking at https://bugzilla.redhat.com/show_bug.cgi?id=1342276 Cole Robinson (2): qemu: More usage of qemuDomainDiskBlockJobIsActive qemu: migration: use consistent error message src/qemu/qemu_driver.c | 7 +------ src/qemu/qemu_hotplug.c | 6 +----- src/qemu/qemu_migration.c | 2 +- 3 files changed, 3 insertions(+), 12 deletions(-) -- 2.7.4

2 5

[libvirt] [PATCH 0/2] Don't add a pci-bridge unless needed on Q35/aarch64
by Laine Stump 16 Jun '16

16 Jun '16

I had these in a branch waiting for further work to make them more useful, and abologna asked about this topic, so I'm posting these two patches. Note that in most cases we'll still get a pci-bridge device added (since most devices are legacy PCI) but at least if the config doesn't have any unaddressed PCI devices, that won't happen. As patch 1 states, the dmi-to-pci-bridge will still be there in all cases for Q35/aarch64. That needs more work to eliminate. Laine Stump (2): qemu: don't be as insistent about adding dmi-to-pci-bridge or pci-bridge qemu: don't add pci-bridge to Q35/arm domains unless it's needed src/qemu/qemu_domain.c | 14 +++++++------- .../qemuxml2argv-aarch64-virt-2.6-virtio-pci-default.args | 1 - .../qemuxml2argv-aarch64-virtio-pci-default.args | 1 - tests/qemuxml2argvdata/qemuxml2argv-pcie-root.args | 3 +-- .../qemuxml2xmlout-aarch64-virtio-pci-default.xml | 5 ----- tests/qemuxml2xmloutdata/qemuxml2xmlout-pcie-root.xml | 5 ----- 6 files changed, 8 insertions(+), 21 deletions(-) -- 2.5.5

2 4

[libvirt] [PATCH] util: Fix broken syntax-check
by John Ferlan 16 Jun '16

16 Jun '16

Commit id '743db933' broke at least one syntax check rule regard open/close braces and perhaps more with spacing. Just remove the braces Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- Pushed as build breaker src/util/virauthconfig.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/src/util/virauthconfig.c b/src/util/virauthconfig.c index b58937c..91c9c0c 100644 --- a/src/util/virauthconfig.c +++ b/src/util/virauthconfig.c @@ -123,9 +123,8 @@ int virAuthConfigLookup(virAuthConfigPtr auth, if (!virKeyFileHasGroup(auth->keyfile, authgroup)) { VIR_FREE(authgroup); - if (virAsprintf(&authgroup, "auth-%s-%s", service, "default") < 0){ + if (virAsprintf(&authgroup, "auth-%s-%s", service, "default") < 0) goto cleanup; - } } if (!virKeyFileHasGroup(auth->keyfile, authgroup)) { -- 2.5.5

1 0

[libvirt] RFC: New CPU hot(un)plug API and XML
by Peter Krempa 16 Jun '16

16 Jun '16

Hi list, I'm planing on adding API that will be used instead of virDomainSetVcpus and will allow a more granular control of which virtual CPUs are enabled for a guest. The new approach will allow to use cpu hotplug properly with NUMA guests as the old APIs would not allow adding CPUs to very specific cgroups. The old APIs should still work fine with the current approach although the final implementation should also allow to unplug vcpus from the guest by using new qemu features. I'm still not sure though whether it will be possible to use this in a backward compatible fashion though depending how this stuff will exactly need to be set up in qemu. # API # As for the new API I'm thinking of the following design: int virDomainVcpu(virDomainPtr domain, unsigned int id, unsigned int flags); The flags for this API would be following: - usual domain modification impact: * VIR_DOMAIN_SET_VCPU_CURRENT * VIR_DOMAIN_SET_VCPU_LIVE * VIR_DOMAIN_SET_VCPU_CONFIG - for specifying the operation as the default operation would query the cpu state: * VIR_DOMAIN_SET_VCPU_ENABLE * VIR_DOMAIN_SET_VCPU_DISABLE - misc: * VIR_DOMAIN_SET_VCPU_GUEST - use the guest agent instead of ACPI hotplug * VIR_DOMAIN_SET_VCPU_NUMA_NODE - 'id' is the ID of a numa node where the cpu should be enabled/disabled rather than CPU id. This is a convenience flag that will allow to add cpu to a given numa node rather than having to find the correct ID. * VIR_DOMAIN_SET_VCPU_CORE - use thread level hotplug (see [1]). This makes sure that the CPU will be plugged in on platforms that require to plug in multiple threads at once. VIR_DOMAIN_SET_VCPU_NUMA_NODE and VIR_DOMAIN_SET_VCPU_GUEST are mutually exclusive as the guest agent doesn't report the guest numa node the CPU is belonging to . If the idea of one API that will both query and set is too nonconformist to our existing API design I have no problem adding Get/Set versions and/or explode the ADD/REMOVE flags into a separate parameter. # XML # The new API will require us to add new XML that will allow to track the state of VCPUs individually. Internally we now have a data structure allowing to keep the relevant data in one place. Currently we are setting data relevant to VCPUs in many places. <domain> [...] <vcpu current='1'>3</vcpu> [...] <cputune> <cpupin ... /> </cputune> [...] <cpu> <numa> <cell id='0' cpus='0' memory='102400' unit='KiB/> <cell id='1' cpus='1-2' memory='102400' unit='KiB/> </numa> As we'll be required to keep the state for every single cpu I'm thinking of adding a new subelement called '<vcpus>' to <domain>. This will have a '<vcpu>' subelement for every configured cpu. I'm specifically not going to add any of the cpupin or numa node ids to the /domain/vcpus/vcpu as input parameters to avoid introducing very compicated checking code that would be required to keep the data in sync. I'm thinking of adding the numa node id as an output only attribute since it's relevant to the hotplug case and it's misplaced otherwise. I certainly can add the duplicated data as output-only attributes. The XML with the new elements should look like: <domain> [...] <vcpu current='1'>3</vcpu> <vcpus> <vcpu id='0' state='enabled'/> <-- option 1, no extra data <vcpu id='1' state='disabled' cell='1'/> <--- option 2, just numa node, since it's non-obvious <vcpu id='2' state='disabled' cell='1' pin='1-2' scheduler='...'/>  </vcpus> [...] <cputune> <cpupin ... /> </cputune> [...] <cpu> <numa> <cell id='0' cpus='0' memory='102400' unit='KiB/> <cell id='1' cpus='1-2' memory='102400' unit='KiB/> </numa> # migration # To ensure migration compatibility a new libvirt will set a new migration feature flag in cases where a sparse topology was created by any means. Older versions of libvirt will reject it. As the new cpu data will be ignored by the parser of older libvirt we don't need to stop formatting them on migration. (fortunately schemas are not validated during migration) # qemu/platform implementation caveats # When starting the VM for the first time it might be necessary to start a throw-away qemu process to query some details that we'll need to pass in on a command line. I'm not sure if this is still necessary and I'll try to avoid it at all cost. [1] Some architectures (ppc64) don't directly support thread-level hotplug and thus require us to plug in a core which translates into multiple threads (8 in case of power 8). Possibly other yet unknown problems. Thanks for your feedback. Peter

3 4

[libvirt] [PATCH] syntax-check: drop prohibit_undesirable_word_seq
by Ján Tomko 16 Jun '16

16 Jun '16

This checks forbids using "can not" and checks the placement of some texinfo tags. Drop it since we do not use texinfo and the check takes almost twice as much as the rest of the checks. --- cfg.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/cfg.mk b/cfg.mk index 297ca3a..d82070d 100644 --- a/cfg.mk +++ b/cfg.mk @@ -64,6 +64,7 @@ local-checks-to-skip = \ sc_prohibit_quote_without_use \ sc_prohibit_quotearg_without_use \ sc_prohibit_stat_st_blocks \ + sc_prohibit_undesirable_word_seq \ sc_root_tests \ sc_space_tab \ sc_sun_os_names \ -- 2.7.3

2 1

[libvirt] Patch review request for Red Hat Bugzilla Bug 1341866
by Ashish Mittal 15 Jun '16

15 Jun '16

Hi, This is a patch review request in response to the following bugzilla: Bug 1341866 RFE: Request to upstream libvirt dependencies for qemu based network block driver from Veritas (1) This patch is required to enable Veritas OpenFlame functionality on RedHat OSP8 platform. (2) Patch has been created on top of libvirt-1.2.17-13.el7.x86_64. Please let me know in case patch has to be rebased on top of the latest libvirt git master branch instead. Regards, Ashish

2 5