June 2016 - Devel - libvirt List Archives

[libvirt] [PATCH] Fix python error reporting for some storage operations
by Cole Robinson 07 Mar '25

07 Mar '25

In the python bindings, all vir* classes expect to be passed a virConnect object when instantiated. Before the storage stuff, these classes were only instantiated in virConnect methods, so the generator is hardcoded to pass 'self' as the connection instance to these classes. Problem is there are some methods that return pool or vol instances which aren't called from virConnect: you can lookup a storage volume's associated pool, and can lookup volumes from a pool. In these cases passing 'self' doesn't give the vir* instance a connection, so when it comes time to raise an exception crap hits the fan. Rather than rework the generator to accomodate this edge case, I just fixed the init functions for virStorage* to pull the associated connection out of the passed value if it's not a virConnect instance. Thanks, Cole diff --git a/python/generator.py b/python/generator.py index 01a17da..c706b19 100755 --- a/python/generator.py +++ b/python/generator.py @@ -962,8 +962,12 @@ def buildWrappers(): list = reference_keepers[classname] for ref in list: classes.write(" self.%s = None\n" % ref[1]) - if classname in [ "virDomain", "virNetwork", "virStoragePool", "virStorageVol" ]: + if classname in [ "virDomain", "virNetwork" ]: classes.write(" self._conn = conn\n") + elif classname in [ "virStorageVol", "virStoragePool" ]: + classes.write(" self._conn = conn\n" + \ + " if not isinstance(conn, virConnect):\n" + \ + " self._conn = conn._conn\n") classes.write(" if _obj != None:self._o = _obj;return\n") classes.write(" self._o = None\n\n"); destruct=None

4 3

[libvirt] [PATCH] Fix compile error for stable 1.2.9
by Yang hongyang 26 Oct '23

26 Oct '23

Seems a backport miss. An extra member is passed to struct virLXCBasicMountInfo. Signed-off-by: Yang hongyang <hongyang.yang(a)easystack.cn> --- src/lxc/lxc_container.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/lxc/lxc_container.c b/src/lxc/lxc_container.c index 28dabec..1c65fa9 100644 --- a/src/lxc/lxc_container.c +++ b/src/lxc/lxc_container.c @@ -760,7 +760,7 @@ typedef struct { static const virLXCBasicMountInfo lxcBasicMounts[] = { { "proc", "/proc", "proc", MS_NOSUID|MS_NOEXEC|MS_NODEV, false, false }, - { "/proc/sys", "/proc/sys", NULL, MS_BIND|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false, false }, + { "/proc/sys", "/proc/sys", NULL, MS_BIND|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false }, { "sysfs", "/sys", "sysfs", MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false }, { "securityfs", "/sys/kernel/security", "securityfs", MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, true, true }, #if WITH_SELINUX -- 1.7.1

3 2

[libvirt] [PATCH] web docs -- macvtap mode explanation
by Stefan Berger 26 Oct '23

26 Oct '23

This adds more information about the different macvtap device modes. Regards, Stefan

3 2

[libvirt] Supporting vhost-net and macvtap in libvirt for QEMU
by Anthony Liguori 26 Oct '23

26 Oct '23

Disclaimer: I am neither an SR-IOV nor a vhost-net expert, but I've CC'd people that are who can throw tomatoes at me for getting bits wrong :-) I wanted to start a discussion about supporting vhost-net in libvirt. vhost-net has not yet been merged into qemu but I expect it will be soon so it's a good time to start this discussion. There are two modes worth supporting for vhost-net in libvirt. The first mode is where vhost-net backs to a tun/tap device. This is behaves in very much the same way that -net tap behaves in qemu today. Basically, the difference is that the virtio backend is in the kernel instead of in qemu so there should be some performance improvement. Current, libvirt invokes qemu with -net tap,fd=X where X is an already open fd to a tun/tap device. I suspect that after we merge vhost-net, libvirt could support vhost-net in this mode by just doing -net vhost,fd=X. I think the only real question for libvirt is whether to provide a user visible switch to use vhost or to just always use vhost when it's available and it makes sense. Personally, I think the later makes sense. The more interesting invocation of vhost-net though is one where the vhost-net device backs directly to a physical network card. In this mode, vhost should get considerably better performance than the current implementation. I don't know the syntax yet, but I think it's reasonable to assume that it will look something like -net tap,dev=eth0. The effect will be that eth0 is dedicated to the guest. On most modern systems, there is a small number of network devices so this model is not all that useful except when dealing with SR-IOV adapters. In that case, each physical device can be exposed as many virtual devices (VFs). There are a few restrictions here though. The biggest is that currently, you can only change the number of VFs by reloading a kernel module so it's really a parameter that must be set at startup time. I think there are a few ways libvirt could support vhost-net in this second mode. The simplest would be to introduce a new tag similar to <source network='br0'>. In fact, if you probed the device type for the network parameter, you could probably do something like <source network='eth0'> and have it Just Work. Another model would be to have libvirt see an SR-IOV adapter as a network pool whereas it handled all of the VF management. Considering how inflexible SR-IOV is today, I'm not sure whether this is the best model. Has anyone put any more thought into this problem or how this should be modeled in libvirt? Michael, could you share your current thinking for -net syntax? -- Regards, Anthony Liguori

8 26

[libvirt] [PATCH 0/2] qemu_cgroup: allow access to /dev/dri/render*
by Ján Tomko 14 Dec '16

14 Dec '16

Technically a v2, but v1 is already pushed. This version is based on the <gl enable> in <spice> instead of accel3d="yes" in <video><model type="virtio". It also only allows access to the render* devices, instead of all of them. https://bugzilla.redhat.com/show_bug.cgi?id=1337290 Ján Tomko (2): Revert "qemu_cgroup: allow access to /dev/dri for virtio-vga" qemu_cgroup: allow access to /dev/dri/render* src/qemu/qemu_cgroup.c | 71 ++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 57 insertions(+), 14 deletions(-) -- 2.7.3

6 17

[libvirt] RFC: add recreate option to domain events conf
by Nikolay Shirokovskiy 09 Dec '16

09 Dec '16

Hi, all. Does it make sense to anybody else that rebooting and resetting a persistent domain from outside or from inside should bring upon pending configuration changes? For this purpose we can add another option to on_reboot and other events, say 'recreate'. From technical POV qemu has enough capabilities, namely -no-reboot option. Nikolay

1 1

Re: [libvirt] question about rdma migration
by Michael R. Hines 25 Oct '16

25 Oct '16

Hi Roy, On 02/09/2016 03:57 AM, Roy Shterman wrote: > Hi, > > I tried to understand the rdma-migration in qemu code and i have two > questions about it: > > 1. I'm working with qemu-kvm using libvirt and i'm getting > > MEMLOCK max locked-in-memory address space 65536 65536 bytes > > in qemu process so I don't understand how can you use rdma-pin-all > with such low MEMLOCK. > > I found a solution in libvirt to lock all vm memory in advance and to > enlarge MEMLOCK. > It uses memoryBacking locking and memory tuning hard_limit of vm > memory but I couldn't find a usage of this in rdma-migration code. > You're absolutey right, the RDMA migration code itself doesn't set this lock limit explicitly because there are system-wide restrictions in both appArmour, /etc/security, as well as SELINUX that restrict applications from arbitrarily setting their maximum memory lock limits. The other problem is CGROUPS: If someone sets a cgroup control for maximum memory and forgets about that mlock() limits, then there will be a conflict. So, libvirt must have a policy to deal with all of these possibilities, not just handle a special case for RDMA migration. The only way "simple" way (without patching the problems above) to apply a higher lock limit to QEMU is to set the ulimit for libvirt (or for QEMU if starting QEMU manually) in your environment or the command line with $ ulimit # before attempting the migration, then the RDMA subsystem will be able to lock the memory successfully. The other option is to use /etc/security/limits.conf and set the option for a specific libvirt process user and make sure your libvirt/qemu are not running as root. QEMU itself also has a "mlock" option built into the command line, but it also suffers from the same problem --- you have to find a way (currently) to increase the limit before using the option. > 2. Do you have any comparison of IOPS and bandwidth between TCP > migration and rdma migration? > Yes, lots of comparisons. http://wiki.qemu.org/Features/RDMALiveMigration http://www.canturkisci.com/ETC/papers/IBMJRD2011/preprint.pdf > Regards, > Roy > >

5 15

[libvirt] Qemu: create empty cdrom
by Gromak Yuriy 18 Oct '16

18 Oct '16

Hello. Qemu is latest from master branch. Tryingto start a domain, which is connected toa blankcdrom: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='sdb' bus='scsi'/> <readonly/> <address type='drive' controller='0' target='1' bus='0' unit='0'/> </disk> But I get an error: qemu-system-x86_64: -drive if=none,id=drive-scsi0-0-1-0,readonly=on,format=raw: Can't use 'raw' as a block driver for the protocol level.

3 2

[libvirt] [PATCH 0/3] add option to keep nvram file on undefine
by Nikolay Shirokovskiy 13 Sep '16

13 Sep '16

There is already a patch [1] on this topic with a different approach - keep nvram file by default. There is also some discussion there. To sum up keeping nvram on undefine could be useful in some usecases so there should be an option to do it. On the other hand there is a danger of leaving domain assets after its undefine and unsing them unintentionally on defining domain with the same name. AFAIU keeping nvram by default was motivated by domain disks behaviour. I think there is a difference as libvirt never create disks for domain as opposed to nvram and managed save and without disks domain will not start so user is quite aware of disks files. On the other hand one can start using nvram file solely putting <nvram> in config and managed save is created on daemon shutdown. So user is much less aware of nvram and managed save existence. Thus one can easily mess up by unaware define $name/using/undefine/define $name again usecase. Thus I vote for keeping said assets only if it is specified explicitly so user knows what he is doing. Adding option to undefine is best solution I come up with. The other options are add checks on define or start and both are impossible. Such a check should be done without any extra flags for it to be useful but this way we break existing users. As this a proof of concept this series does not add extra flag for managed save. [1] https://www.redhat.com/archives/libvir-list/2015-February/msg00915.html Nikolay Shirokovskiy (3): api: add VIR_DOMAIN_UNDEFINE_KEEP_NVRAM flag qemu: add VIR_DOMAIN_UNDEFINE_KEEP_NVRAM support virsh: add --keep-nvram option to undefine command include/libvirt/libvirt-domain.h | 1 + src/qemu/qemu_driver.c | 26 +++++++++++++++++--------- tools/virsh-domain.c | 8 ++++++++ tools/virsh.pod | 6 +++--- 4 files changed, 29 insertions(+), 12 deletions(-) -- 1.8.3.1

5 10

[libvirt] [libvirt-glib/libvirt-gconfig 00/17] Graphics: Introduce the new Remote and Local classes (and also implement a few missing methods).
by Fabiano Fidêncio 06 Sep '16

06 Sep '16

While trying to use libvirt-gobject and libvirt-gconfig for accessing VMs and looking at their config, instead of using libvirt and parsing XML directly, I found out that a few methods have been missing and that libvirt-gconfig is not exactly thought for the "reading their config" use case (see more explanations on the 10th and 14th commits. This series, unfortunately, introduces an ABI breakage. Fabiano Fidêncio (17): gconfig: Implement gvir_config_domain_graphics_vnc_get_autoport() gconfig: Implement gvir_config_domain_graphics_spice_get_autoport() gconfig: Implement gvir_config_domain_graphics_rdp_get_autoport() gconfig: Implement gvir_config_domain_graphics_sdl_get_display() gconfig: Implement gvir_config_domain_graphics_sdl_get_fullscreen() gconfig: Implement gvir_config_domain_graphics_spice_get_tls_port() gconfig: Implement gvir_config_domain_graphics_spice_{get,set}_host() gconfig: Implement gvir_config_domain_graphics_vnc_{get,set}_host() gconfig: Implement gvir_config_domain_graphics_rdp_{get,set}_host() gconfig: Add GVirCofigDomainGraphicsRemote class gconfig: Adapt GVirConfigDomainGraphicsSpice to GVirConfigDomainGraphicsRemote gconfig: Adapt GVirConfigDomainGraphicsRdp to GVirConfigDomainGraphicsRemote gconfig: Adapt GVirConfigDomainGraphicsVnc to GVirConfigDomainGraphicsRemote gconfig: Add GVirCofigDomainGraphicsLocal class gconfig: Adapt GVirConfigDomainGraphicsSdl to GVirConfigDomainGraphicsLocal gconfig: Adapt GVirConfigDomainGraphicsDesktop to GVirConfigDomainGraphicsLocal gconfig,graphics: Avoid crash when gvir_config_object_new_from_xml() returns NULL libvirt-gconfig/Makefile.am | 4 + .../libvirt-gconfig-domain-graphics-desktop.c | 14 ++- .../libvirt-gconfig-domain-graphics-desktop.h | 4 +- .../libvirt-gconfig-domain-graphics-local.c | 97 +++++++++++++++++++ .../libvirt-gconfig-domain-graphics-local.h | 68 ++++++++++++++ .../libvirt-gconfig-domain-graphics-rdp.c | 32 ++++++- .../libvirt-gconfig-domain-graphics-rdp.h | 9 +- .../libvirt-gconfig-domain-graphics-remote.c | 103 +++++++++++++++++++++ .../libvirt-gconfig-domain-graphics-remote.h | 70 ++++++++++++++ .../libvirt-gconfig-domain-graphics-sdl.c | 19 +++- .../libvirt-gconfig-domain-graphics-sdl.h | 6 +- .../libvirt-gconfig-domain-graphics-spice.c | 40 +++++++- .../libvirt-gconfig-domain-graphics-spice.h | 10 +- .../libvirt-gconfig-domain-graphics-vnc.c | 32 ++++++- .../libvirt-gconfig-domain-graphics-vnc.h | 9 +- libvirt-gconfig/libvirt-gconfig.h | 2 + libvirt-gconfig/libvirt-gconfig.sym | 20 ++++ po/POTFILES.in | 2 + 18 files changed, 513 insertions(+), 28 deletions(-) create mode 100644 libvirt-gconfig/libvirt-gconfig-domain-graphics-local.c create mode 100644 libvirt-gconfig/libvirt-gconfig-domain-graphics-local.h create mode 100644 libvirt-gconfig/libvirt-gconfig-domain-graphics-remote.c create mode 100644 libvirt-gconfig/libvirt-gconfig-domain-graphics-remote.h -- 2.5.0

2 30