April 2016 - Devel - libvirt List Archives

[libvirt] [PATCH] vz: fix disk enumeration
by Mikhail Feoktistov 28 Apr '16

28 Apr '16

If we want to delete all disks for container or vm we should make a loop from 0 to NumberOfDisks and always use zero index in PrlVmCfg_GetHardDisk to get disk handle. When we delete first disk after that numbers of other disks will be changed, start from 0 to NumberOfDisks-1. That's why we should always use zero index. --- src/vz/vz_sdk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/vz/vz_sdk.c b/src/vz/vz_sdk.c index 8cc8430..70d61e5 100644 --- a/src/vz/vz_sdk.c +++ b/src/vz/vz_sdk.c @@ -3810,7 +3810,7 @@ prlsdkDetachDomainHardDisks(PRL_HANDLE sdkdom) prlsdkCheckRetGoto(pret, cleanup); for (i = 0; i < hddCount; ++i) { - pret = PrlVmCfg_GetHardDisk(sdkdom, i, &sdkdisk); + pret = PrlVmCfg_GetHardDisk(sdkdom, 0, &sdkdisk); prlsdkCheckRetGoto(pret, cleanup); pret = PrlVmDev_Remove(sdkdisk); -- 1.8.3.1

3 2

[libvirt] [PATCH] virsh: support up to 64 migration options for command: again
by Nikolay Shirokovskiy 28 Apr '16

28 Apr '16

Add ULL suffix to all related operands of << or shift will give all zeros instead of correct mask. Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy(a)virtuozzo.com> --- tools/vsh.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/tools/vsh.c b/tools/vsh.c index a80e851..605c574 100644 --- a/tools/vsh.c +++ b/tools/vsh.c @@ -376,17 +376,17 @@ vshCmddefOptParse(const vshCmdDef *cmd, uint64_t *opts_need_arg, } if (opt->flags & VSH_OFLAG_REQ_OPT) { if (opt->flags & VSH_OFLAG_REQ) - *opts_required |= 1 << i; + *opts_required |= 1ULL << i; else optional = true; continue; } - *opts_need_arg |= 1 << i; + *opts_need_arg |= 1ULL << i; if (opt->flags & VSH_OFLAG_REQ) { if (optional && opt->type != VSH_OT_ARGV) return -1; /* mandatory options must be listed first */ - *opts_required |= 1 << i; + *opts_required |= 1ULL << i; } else { optional = true; } @@ -440,11 +440,11 @@ vshCmddefGetOption(vshControl *ctl, const vshCmdDef *cmd, const char *name, } continue; } - if ((*opts_seen & (1 << i)) && opt->type != VSH_OT_ARGV) { + if ((*opts_seen & (1ULL << i)) && opt->type != VSH_OT_ARGV) { vshError(ctl, _("option --%s already seen"), name); goto cleanup; } - *opts_seen |= 1 << i; + *opts_seen |= 1ULL << i; *opt_index = i; ret = opt; goto cleanup; @@ -474,8 +474,8 @@ vshCmddefGetData(const vshCmdDef *cmd, uint64_t *opts_need_arg, i = ffsl(*opts_need_arg) - 1; opt = &cmd->opts[i]; if (opt->type != VSH_OT_ARGV) - *opts_need_arg &= ~(1 << i); - *opts_seen |= 1 << i; + *opts_need_arg &= ~(1ULL << i); + *opts_seen |= 1ULL << i; return opt; } @@ -494,7 +494,7 @@ vshCommandCheckOpts(vshControl *ctl, const vshCmd *cmd, uint64_t opts_required, return 0; for (i = 0; def->opts[i].name; i++) { - if (opts_required & (1 << i)) { + if (opts_required & (1ULL << i)) { const vshCmdOptDef *opt = &def->opts[i]; vshError(ctl, @@ -1419,7 +1419,7 @@ vshCommandParse(vshControl *ctl, vshCommandParser *parser) goto syntaxError; } if (opt->type != VSH_OT_ARGV) - opts_need_arg &= ~(1 << opt_index); + opts_need_arg &= ~(1ULL << opt_index); } else { tkdata = NULL; if (optstr) { -- 1.8.3.1

2 1

[libvirt] [PATCH 0/8] (incomplete) fix of "peer" address feature
by Laine Stump 28 Apr '16

28 Apr '16

This patch series fixes this feature enoough that it works: 1) emits "peer" attribute in formatted XML when present in the NetDef object, so that the config will "stick" 2) swaps "address" and "peer" for qemu, so that "address" consistently refers to the IP address used by the guest, and "peer" to the address used by the host. 3) ... and the rest *BUT* it doesn't address the sub-optimal naming of the new attribute, nor does it fix the documentation which is incorrect not only in its description, but also in the starting version number for QEMU support. Also, I'm skeptical that this new feature is useful for the types of lxc interfaces that are supported (macvtap i.e. "direct", and a veth connected to a bridge) - from my understanding, it would only be useful for a type='ethernet' interface (a tap/veth pair not connected to any bridge), and that isn't supported by lxc yet; for type='bridge' and type='network' (which is also connecting to a bridge) I don't see the use case. So I'm torn about whether these patches should be put in for this release in order to made the already-pushed code work, or if we should just hold off until we: 1) find/agree on a better name for the new attribute (see my earlier mail titled 'interface "peer address" patches are broken for details on my opinion) 2) decide if it's actually useful to support the "peer" address for type='network|bridge" in lxc (it isn't in qemu). 3) fix the documentation (I started into that when I realized the By not pushing the fixes, we guarantee that nobody can use the feature, and thus will technically still be able to change the name of the attribute even after arelease has passed (because we won't break anyone's usable config). Opinions on what to do? (I would consider reverting the original patches temporarily until it's all sorted out, but I don't know what kind of conflicts that would cause; I know that there has been at least one bugfix patch) Laine Stump (8): conf: clean up virDomainNetIpParseXML() tests: mock virNetDevSetIPAddress conf: emit an IP address "peer" attribute in XML when present util: allow calling virSocketAddrGetIpPrefix with NULL netmask or address qemu/lxc: use correct prefix when setting tap/veth IP address qemu/lxc: log peer address when setting a domain interface's IP qemu: swap "address" and "peer" when setting IP address for tap interfaces qemu: require "peer" if ip address is supplied for an interface src/conf/domain_conf.c | 46 +++++++++++++--------- src/lxc/lxc_container.c | 36 +++++++++++++---- src/qemu/qemu_domain.c | 44 ++++++++++++++++++--- src/qemu/qemu_interface.c | 44 +++++++++++++++------ src/util/virsocketaddr.c | 8 ++-- src/util/virsocketaddr.h | 3 +- .../qemuxml2argv-net-eth-peer.args | 20 ++++++++++ .../qemuxml2argvdata/qemuxml2argv-net-eth-peer.xml | 30 ++++++++++++++ tests/qemuxml2argvmock.c | 10 ++++- tests/qemuxml2argvtest.c | 1 + .../qemuxml2xmlout-net-eth-peer.xml | 33 ++++++++++++++++ tests/qemuxml2xmltest.c | 1 + 12 files changed, 226 insertions(+), 50 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-net-eth-peer.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-net-eth-peer.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-net-eth-peer.xml -- 2.5.5

2 9

[libvirt] RFC backup API
by Maxim Nestratov 28 Apr '16

28 Apr '16

Hi all, It's been already quite a long time since qemu implemented QMP "drive-backup" command to create block devices backups. Even more, since qemu 2.4 there is a possibility to create incremental backups. Though it is possible to backup all attached to a domain disk drives by combining them into a single QMP transaction command, this way of creating them, not to mention managing, remains inconvenient for an end user of libvirt. Moreover, creating a single drive backup via QMP interface isn't handy either. That said, it looks reasonable to introduce a *new backup API* based on QMP "drive-backup" facilities. Though we can start from a single simple function, allowing to create a disk backup by means of QMP "drive-backup" command, I'd like to discuss here the level of management libvirt could provide for backup operations. To begin with, here is the preliminary list of possible functions that I think make sense for libvirt API. virDomainCreateBackup - which creates a backup full/incremental of all/selected disks, virListBackups - which lists all backups created for a particular domain/target, virRestoreBackup - which restores all/selected disks from a backup, virDeleteBackup - which deletes all/selected disks from a backup. It looks like backup management functions, except create one, shouldn't be or might not be bound to a particular domain and we could possibly leverage storage pool API with some extension. Specifically, volume definition could be extended with necessary meta data related to backups. The *question* is: if the whole idea about this new API as described above or something similar makes sense? If yes, then let's find out requirements for it (if any) and I will try to prepare a patch set with the first RFC implementation to discuss the API in more details. Looking forward for your opinions on the matter. Maxim

5 18

[libvirt] [PATCH v3] qemu: Regenerate VNC socket paths
by Martin Kletzander 28 Apr '16

28 Apr '16

Similarly to what commit 714080791778 did with some internal paths, clear vnc socket paths that were generated by us. Having such path in the definition can cause trouble when restoring the domain. The path is generated to the per-domain directory that contains the domain ID. However, that ID will be different upon restoration, so qemu won't be able to create that socket because the directory will not be prepared. To be able to migrate to older libvirt, skip formatting the socket path in migratable XML if it was autogenerated. And mark it as autogenerated if it already exists and we're parsing live XML. Best viewed with '-C'. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1326270 Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- v3: - Let the new boolean survive daemon restarts (or rather make it even more inteligent than just remembering it v2: - Be able to migrate to older libvirt as well - https://www.redhat.com/archives/libvir-list/2016-April/msg01803.html v1: - https://www.redhat.com/archives/libvir-list/2016-April/msg01735.html src/conf/domain_conf.c | 6 +++- src/conf/domain_conf.h | 1 + src/qemu/qemu_command.c | 11 +++--- src/qemu/qemu_domain.c | 26 ++++++++++++++- .../qemuxml2argv-graphics-vnc-autosocket.args | 22 ++++++++++++ .../qemuxml2argv-graphics-vnc-autosocket.xml | 34 +++++++++++++++++++ .../qemuxml2xmlout-graphics-vnc-autosocket.xml | 39 ++++++++++++++++++++++ tests/qemuxml2xmltest.c | 7 ++++ 8 files changed, 140 insertions(+), 6 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-graphics-vnc-autosocket.xml diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index b46cd2a64f75..d8bed670f243 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -21342,7 +21342,11 @@ virDomainGraphicsDefFormat(virBufferPtr buf, switch (def->type) { case VIR_DOMAIN_GRAPHICS_TYPE_VNC: if (def->data.vnc.socket) { - virBufferEscapeString(buf, " socket='%s'", def->data.vnc.socket); + if (!def->data.vnc.socketAutogenerated || + !(flags & VIR_DOMAIN_DEF_FORMAT_MIGRATABLE)) { + virBufferEscapeString(buf, " socket='%s'", + def->data.vnc.socket); + } } else { if (def->data.vnc.port && (!def->data.vnc.autoport || !(flags & VIR_DOMAIN_DEF_FORMAT_INACTIVE))) diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index ee66e6d6aa45..31e7a86d4746 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -1564,6 +1564,7 @@ struct _virDomainGraphicsDef { bool autoport; char *keymap; char *socket; + bool socketAutogenerated; virDomainGraphicsAuthDef auth; int sharePolicy; } vnc; diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 9597b307e9de..6fbfe215bf29 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -7277,10 +7277,13 @@ qemuBuildGraphicsVNCCommandLine(virQEMUDriverConfigPtr cfg, } if (graphics->data.vnc.socket || cfg->vncAutoUnixSocket) { - if (!graphics->data.vnc.socket && - virAsprintf(&graphics->data.vnc.socket, - "%s/vnc.sock", domainLibDir) == -1) - goto error; + if (!graphics->data.vnc.socket) { + if (virAsprintf(&graphics->data.vnc.socket, + "%s/vnc.sock", domainLibDir) < 0) + goto error; + + graphics->data.vnc.socketAutogenerated = true; + } virBufferAsprintf(&opt, "unix:%s", graphics->data.vnc.socket); diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index a2f981043915..6262bfee47d0 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -1659,10 +1659,32 @@ qemuCanonicalizeMachine(virDomainDefPtr def, virQEMUCapsPtr qemuCaps) } +static void +qemuDomainRecheckInternalPaths(virDomainDefPtr def, + virQEMUDriverConfigPtr cfg, + unsigned int flags) +{ + size_t i = 0; + + for (i = 0; i < def->ngraphics; ++i) { + virDomainGraphicsDefPtr graphics = def->graphics[i]; + + if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_VNC && + graphics->data.vnc.socket && + STRPREFIX(graphics->data.vnc.socket, cfg->libDir)) { + if (flags & VIR_DOMAIN_DEF_PARSE_INACTIVE) + VIR_FREE(graphics->data.vnc.socket); + else + graphics->data.vnc.socketAutogenerated = true; + } + } +} + + static int qemuDomainDefPostParse(virDomainDefPtr def, virCapsPtr caps, - unsigned int parseFlags ATTRIBUTE_UNUSED, + unsigned int parseFlags, void *opaque) { virQEMUDriverPtr driver = opaque; @@ -1708,6 +1730,8 @@ qemuDomainDefPostParse(virDomainDefPtr def, qemuDomainDefEnableDefaultFeatures(def); + qemuDomainRecheckInternalPaths(def, cfg, parseFlags); + if (virSecurityManagerVerify(driver->securityManager, def) < 0) goto cleanup; diff --git a/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.args b/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.args new file mode 100644 index 000000000000..7e1fb6b3717f --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.args @@ -0,0 +1,22 @@ +LC_ALL=C \ +PATH=/bin \ +HOME=/home/test \ +USER=test \ +LOGNAME=test \ +QEMU_AUDIO_DRV=none \ +/usr/bin/qemu \ +-name QEMUGuest1 \ +-S \ +-M pc \ +-m 214 \ +-smp 1 \ +-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \ +-nodefaults \ +-monitor unix:/tmp/lib/domain--1-QEMUGuest1/monitor.sock,server,nowait \ +-no-acpi \ +-boot c \ +-usb \ +-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ +-device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ +-vnc unix:/tmp/lib/domain--1-QEMUGuest1/vnc.socket \ +-vga cirrus diff --git a/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.xml b/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.xml new file mode 100644 index 000000000000..fa59c39873a5 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.xml @@ -0,0 +1,34 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219100</memory> + <currentMemory unit='KiB'>219100</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='disk'> + <driver name='qemu' type='raw'/> + <source dev='/dev/HostVG/QEMUGuest1'/> + <target dev='hda' bus='ide'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <controller type='usb' index='0'/> + <controller type='ide' index='0'/> + <controller type='pci' index='0' model='pci-root'/> + <input type='mouse' bus='ps2'/> + <input type='keyboard' bus='ps2'/> + <graphics type='vnc' socket='/tmp/lib/domain-99-QEMUGuest1/delete.this.socket'/> + <video> + <model type='cirrus' vram='16384' heads='1'/> + </video> + <memballoon model='none'/> + </devices> +</domain> diff --git a/tests/qemuxml2xmloutdata/qemuxml2xmlout-graphics-vnc-autosocket.xml b/tests/qemuxml2xmloutdata/qemuxml2xmlout-graphics-vnc-autosocket.xml new file mode 100644 index 000000000000..744053368745 --- /dev/null +++ b/tests/qemuxml2xmloutdata/qemuxml2xmlout-graphics-vnc-autosocket.xml @@ -0,0 +1,39 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219100</memory> + <currentMemory unit='KiB'>219100</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='disk'> + <driver name='qemu' type='raw'/> + <source dev='/dev/HostVG/QEMUGuest1'/> + <target dev='hda' bus='ide'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <controller type='usb' index='0'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> + </controller> + <controller type='ide' index='0'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> + </controller> + <controller type='pci' index='0' model='pci-root'/> + <input type='mouse' bus='ps2'/> + <input type='keyboard' bus='ps2'/> + <graphics type='vnc' port='-1' autoport='yes'/> + <video> + <model type='cirrus' vram='16384' heads='1' primary='yes'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> + </video> + <memballoon model='none'/> + </devices> +</domain> diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c index f766f4dc521e..62f8f96c2274 100644 --- a/tests/qemuxml2xmltest.c +++ b/tests/qemuxml2xmltest.c @@ -263,6 +263,7 @@ mymain(void) { int ret = 0; struct testInfo info; + virQEMUDriverConfigPtr cfg = NULL; if (qemuTestDriverInit(&driver) < 0) return EXIT_FAILURE; @@ -774,6 +775,12 @@ mymain(void) DO_TEST("virtio-input"); DO_TEST("virtio-input-passthrough"); + cfg = virQEMUDriverGetConfig(&driver); + cfg->vncAutoUnixSocket = true; + DO_TEST_FULL("graphics-vnc-autosocket", WHEN_INACTIVE, NONE); + cfg->vncAutoUnixSocket = false; + + virObjectUnref(cfg); qemuTestDriverFree(&driver); return ret == 0 ? EXIT_SUCCESS : EXIT_FAILURE; -- 2.8.1

2 1

[libvirt] [PATCH 0/8] Add support for virtio-scsi-{pci, ccw} iothread support
by John Ferlan 28 Apr '16

28 Apr '16

Add support for virtio-scsi-{pci,ccw} iothreads. Each patch has details. John Ferlan (8): qemu: Add capability for virtio-scsi iothreads docs: clarify disk iothread support docs: Reformat the Controllers description conf: Move virDomainControllerModelTypeToString conf: Add disk iothread bus check in device post parse conf: Add support for virtio-scsi iothreads qemu: Use switch for qemuCheckIOThreads qemu: Add 'iothread' to command line for supported controller docs/formatdomain.html.in | 87 ++++++--- docs/schemas/domaincommon.rng | 3 + src/conf/domain_conf.c | 61 +++++-- src/conf/domain_conf.h | 1 + src/qemu/qemu_capabilities.c | 9 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 115 ++++++++++-- tests/qemucapabilitiesdata/caps_1.2.2-1.replies | 80 +++++---- tests/qemucapabilitiesdata/caps_1.3.1-1.replies | 80 +++++---- tests/qemucapabilitiesdata/caps_1.4.2-1.replies | 88 +++++---- tests/qemucapabilitiesdata/caps_1.5.3-1.replies | 88 +++++---- tests/qemucapabilitiesdata/caps_1.6.0-1.replies | 88 +++++---- tests/qemucapabilitiesdata/caps_1.6.50-1.replies | 88 +++++---- tests/qemucapabilitiesdata/caps_2.1.1-1.replies | 88 +++++---- tests/qemucapabilitiesdata/caps_2.4.0-1.caps | 1 + tests/qemucapabilitiesdata/caps_2.4.0-1.replies | 177 ++++++++++++++---- tests/qemucapabilitiesdata/caps_2.5.0-1.caps | 1 + tests/qemucapabilitiesdata/caps_2.5.0-1.replies | 197 +++++++++++++++++---- tests/qemucapabilitiesdata/caps_2.6.0-1.caps | 1 + tests/qemucapabilitiesdata/caps_2.6.0-1.replies | 192 ++++++++++++++++---- .../qemuxml2argv-iothreads-virtio-scsi-ccw.args | 28 +++ .../qemuxml2argv-iothreads-virtio-scsi-ccw.xml | 39 ++++ .../qemuxml2argv-iothreads-virtio-scsi-pci.args | 32 ++++ .../qemuxml2argv-iothreads-virtio-scsi-pci.xml | 47 +++++ tests/qemuxml2argvtest.c | 6 + .../qemuxml2xmlout-iothreads-virtio-scsi-ccw.xml | 39 ++++ .../qemuxml2xmlout-iothreads-virtio-scsi-pci.xml | 51 ++++++ tests/qemuxml2xmltest.c | 7 + 28 files changed, 1314 insertions(+), 381 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-iothreads-virtio-scsi-ccw.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-iothreads-virtio-scsi-ccw.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-iothreads-virtio-scsi-pci.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-iothreads-virtio-scsi-pci.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-iothreads-virtio-scsi-ccw.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-iothreads-virtio-scsi-pci.xml -- 2.5.5

3 14

[libvirt] [PATCH v2 0/3] Add panic device support for S390
by Boris Fiuczynski 28 Apr '16

28 Apr '16

S390 architecture inherently provides a crash detection capability which has not been reflected in the domain xml. This series adds an s390 model to the panic device which does not allow an address to be specified and is by default created on S390 guests unless already provided. v3: Grouped default panic device creation and required test code changes into one patch. v2: Added an s390 model instead of using default model for toleration. Boris Fiuczynski (3): qemu: add panic device support for S390 qemu: add default panic device to S390 guests tests: add tests for panic device model s390 docs/formatdomain.html.in | 7 +++++- docs/schemas/domaincommon.rng | 1 + src/conf/domain_conf.c | 3 ++- src/conf/domain_conf.h | 1 + src/qemu/qemu_command.c | 21 +++++++++++++++- src/qemu/qemu_domain.c | 9 ++++++- .../qemuargv2xml-machine-aeskeywrap-off-argv.xml | 1 + .../qemuargv2xml-machine-aeskeywrap-on-argv.xml | 1 + .../qemuargv2xml-machine-deakeywrap-off-argv.xml | 1 + .../qemuargv2xml-machine-deakeywrap-on-argv.xml | 1 + .../qemuargv2xml-machine-keywrap-none-argv.xml | 1 + tests/qemuxml2argvdata/qemuxml2argv-panic-s390.xml | 22 ++++++++++++++++ .../qemuxml2argv-s390-panic-address.xml | 26 +++++++++++++++++++ .../qemuxml2argv-s390-panic-missing.args | 25 +++++++++++++++++++ .../qemuxml2argv-s390-panic-missing.xml | 23 +++++++++++++++++ .../qemuxml2argv-s390-panic-no-address.args | 25 +++++++++++++++++++ .../qemuxml2argv-s390-panic-no-address.xml | 24 ++++++++++++++++++ tests/qemuxml2argvtest.c | 11 +++++++- .../qemuxml2xmlout-iothreads-disk-virtio-ccw.xml | 1 + .../qemuxml2xmlout-panic-s390.xml | 28 +++++++++++++++++++++ .../qemuxml2xmlout-s390-defaultconsole.xml | 1 + .../qemuxml2xmlout-s390-panic-missing.xml | 29 ++++++++++++++++++++++ tests/qemuxml2xmltest.c | 4 +++ 23 files changed, 261 insertions(+), 5 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-panic-s390.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-s390-panic-address.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-s390-panic-missing.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-s390-panic-missing.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-s390-panic-no-address.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-s390-panic-no-address.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-panic-s390.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-s390-panic-missing.xml -- 2.3.0

2 9

[libvirt] [PATCH v2] qemu: Regenerate VNC socket paths
by Martin Kletzander 28 Apr '16

28 Apr '16

Similarly to what commit 714080791778 did with some internal paths, clear vnc socket paths that were generated by us. Having such path in the definition can cause trouble when restoring the domain. The path is generated to the per-domain directory that contains the domain ID. However, that ID will be different upon restoration, so qemu won't be able to create that socket because the directory will not be prepared. To be able to migrate to older libvirt, skip formatting the socket path in migratable XML if it was autogenerated. Best viewed with '-C'. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1326270 Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- v2: - Be able to migrate to older libvirt as well v1: - https://www.redhat.com/archives/libvir-list/2016-April/msg01735.html src/conf/domain_conf.c | 6 +++- src/conf/domain_conf.h | 1 + src/qemu/qemu_command.c | 11 +++--- src/qemu/qemu_domain.c | 21 +++++++++++- .../qemuxml2argv-graphics-vnc-autosocket.args | 22 ++++++++++++ .../qemuxml2argv-graphics-vnc-autosocket.xml | 34 +++++++++++++++++++ .../qemuxml2xmlout-graphics-vnc-autosocket.xml | 39 ++++++++++++++++++++++ tests/qemuxml2xmltest.c | 7 ++++ 8 files changed, 135 insertions(+), 6 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-graphics-vnc-autosocket.xml diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index b46cd2a64f75..d8bed670f243 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -21342,7 +21342,11 @@ virDomainGraphicsDefFormat(virBufferPtr buf, switch (def->type) { case VIR_DOMAIN_GRAPHICS_TYPE_VNC: if (def->data.vnc.socket) { - virBufferEscapeString(buf, " socket='%s'", def->data.vnc.socket); + if (!def->data.vnc.socketAutogenerated || + !(flags & VIR_DOMAIN_DEF_FORMAT_MIGRATABLE)) { + virBufferEscapeString(buf, " socket='%s'", + def->data.vnc.socket); + } } else { if (def->data.vnc.port && (!def->data.vnc.autoport || !(flags & VIR_DOMAIN_DEF_FORMAT_INACTIVE))) diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index ee66e6d6aa45..31e7a86d4746 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -1564,6 +1564,7 @@ struct _virDomainGraphicsDef { bool autoport; char *keymap; char *socket; + bool socketAutogenerated; virDomainGraphicsAuthDef auth; int sharePolicy; } vnc; diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 9597b307e9de..6fbfe215bf29 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -7277,10 +7277,13 @@ qemuBuildGraphicsVNCCommandLine(virQEMUDriverConfigPtr cfg, } if (graphics->data.vnc.socket || cfg->vncAutoUnixSocket) { - if (!graphics->data.vnc.socket && - virAsprintf(&graphics->data.vnc.socket, - "%s/vnc.sock", domainLibDir) == -1) - goto error; + if (!graphics->data.vnc.socket) { + if (virAsprintf(&graphics->data.vnc.socket, + "%s/vnc.sock", domainLibDir) < 0) + goto error; + + graphics->data.vnc.socketAutogenerated = true; + } virBufferAsprintf(&opt, "unix:%s", graphics->data.vnc.socket); diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index a2f981043915..d6f704d6f91b 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -1659,10 +1659,26 @@ qemuCanonicalizeMachine(virDomainDefPtr def, virQEMUCapsPtr qemuCaps) } +static void +qemuDomainCleanupInternalPaths(virDomainDefPtr def, virQEMUDriverConfigPtr cfg) +{ + size_t i = 0; + + for (i = 0; i < def->ngraphics; ++i) { + virDomainGraphicsDefPtr graphics = def->graphics[i]; + + if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_VNC && + graphics->data.vnc.socket && + STRPREFIX(graphics->data.vnc.socket, cfg->libDir)) + VIR_FREE(graphics->data.vnc.socket); + } +} + + static int qemuDomainDefPostParse(virDomainDefPtr def, virCapsPtr caps, - unsigned int parseFlags ATTRIBUTE_UNUSED, + unsigned int parseFlags, void *opaque) { virQEMUDriverPtr driver = opaque; @@ -1708,6 +1724,9 @@ qemuDomainDefPostParse(virDomainDefPtr def, qemuDomainDefEnableDefaultFeatures(def); + if (parseFlags & VIR_DOMAIN_DEF_PARSE_INACTIVE) + qemuDomainCleanupInternalPaths(def, cfg); + if (virSecurityManagerVerify(driver->securityManager, def) < 0) goto cleanup; diff --git a/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.args b/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.args new file mode 100644 index 000000000000..7e1fb6b3717f --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.args @@ -0,0 +1,22 @@ +LC_ALL=C \ +PATH=/bin \ +HOME=/home/test \ +USER=test \ +LOGNAME=test \ +QEMU_AUDIO_DRV=none \ +/usr/bin/qemu \ +-name QEMUGuest1 \ +-S \ +-M pc \ +-m 214 \ +-smp 1 \ +-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \ +-nodefaults \ +-monitor unix:/tmp/lib/domain--1-QEMUGuest1/monitor.sock,server,nowait \ +-no-acpi \ +-boot c \ +-usb \ +-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \ +-device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ +-vnc unix:/tmp/lib/domain--1-QEMUGuest1/vnc.socket \ +-vga cirrus diff --git a/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.xml b/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.xml new file mode 100644 index 000000000000..fa59c39873a5 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-autosocket.xml @@ -0,0 +1,34 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219100</memory> + <currentMemory unit='KiB'>219100</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='disk'> + <driver name='qemu' type='raw'/> + <source dev='/dev/HostVG/QEMUGuest1'/> + <target dev='hda' bus='ide'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <controller type='usb' index='0'/> + <controller type='ide' index='0'/> + <controller type='pci' index='0' model='pci-root'/> + <input type='mouse' bus='ps2'/> + <input type='keyboard' bus='ps2'/> + <graphics type='vnc' socket='/tmp/lib/domain-99-QEMUGuest1/delete.this.socket'/> + <video> + <model type='cirrus' vram='16384' heads='1'/> + </video> + <memballoon model='none'/> + </devices> +</domain> diff --git a/tests/qemuxml2xmloutdata/qemuxml2xmlout-graphics-vnc-autosocket.xml b/tests/qemuxml2xmloutdata/qemuxml2xmlout-graphics-vnc-autosocket.xml new file mode 100644 index 000000000000..744053368745 --- /dev/null +++ b/tests/qemuxml2xmloutdata/qemuxml2xmlout-graphics-vnc-autosocket.xml @@ -0,0 +1,39 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219100</memory> + <currentMemory unit='KiB'>219100</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='disk'> + <driver name='qemu' type='raw'/> + <source dev='/dev/HostVG/QEMUGuest1'/> + <target dev='hda' bus='ide'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <controller type='usb' index='0'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> + </controller> + <controller type='ide' index='0'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> + </controller> + <controller type='pci' index='0' model='pci-root'/> + <input type='mouse' bus='ps2'/> + <input type='keyboard' bus='ps2'/> + <graphics type='vnc' port='-1' autoport='yes'/> + <video> + <model type='cirrus' vram='16384' heads='1' primary='yes'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> + </video> + <memballoon model='none'/> + </devices> +</domain> diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c index f766f4dc521e..62f8f96c2274 100644 --- a/tests/qemuxml2xmltest.c +++ b/tests/qemuxml2xmltest.c @@ -263,6 +263,7 @@ mymain(void) { int ret = 0; struct testInfo info; + virQEMUDriverConfigPtr cfg = NULL; if (qemuTestDriverInit(&driver) < 0) return EXIT_FAILURE; @@ -774,6 +775,12 @@ mymain(void) DO_TEST("virtio-input"); DO_TEST("virtio-input-passthrough"); + cfg = virQEMUDriverGetConfig(&driver); + cfg->vncAutoUnixSocket = true; + DO_TEST_FULL("graphics-vnc-autosocket", WHEN_INACTIVE, NONE); + cfg->vncAutoUnixSocket = false; + + virObjectUnref(cfg); qemuTestDriverFree(&driver); return ret == 0 ? EXIT_SUCCESS : EXIT_FAILURE; -- 2.8.1

2 3

[libvirt] [PATCH] qemu: Error out if setting vcpu count would lead to invalid config
by Peter Krempa 28 Apr '16

28 Apr '16

When the domain definition describes a machine with NUMA, setting the maximum vCPU count via the API might lead to an invalid config. Add a check that will forbid this until we add more advanced cpu config capabilities. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1327499 --- src/libvirt_private.syms | 1 + src/qemu/qemu_driver.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index ad5c382..769bdb7 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -673,6 +673,7 @@ virNodeDeviceObjUnlock; virDomainNumaCheckABIStability; virDomainNumaEquals; virDomainNumaFree; +virDomainNumaGetCPUCountTotal; virDomainNumaGetMaxCPUID; virDomainNumaGetMemorySize; virDomainNumaGetNodeCount; diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 542d13c..44ec42d 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -4898,6 +4898,13 @@ qemuDomainSetVcpusFlags(virDomainPtr dom, unsigned int nvcpus, if (persistentDef) { if (flags & VIR_DOMAIN_VCPU_MAXIMUM) { + if (virDomainNumaGetCPUCountTotal(persistentDef->numa) > nvcpus) { + virReportError(VIR_ERR_INVALID_ARG, "%s", + _("Number of CPUs in <numa> exceeds the desired " + "maximum vcpu count")); + goto endjob; + } + if (virDomainDefSetVcpusMax(persistentDef, nvcpus) < 0) goto endjob; } else { -- 2.8.1

2 2

[libvirt] [PATCH v2] qemu: conf: Set default logging approach in virQEMUDriverConfigNew
by Peter Krempa 28 Apr '16

28 Apr '16

Instead of setting the default qemu stdio logging approach in virQEMUDriverConfigLoadFile set it in virQEMUDriverConfigNew so that it's properly set even when the config is not present. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1325075 --- src/qemu/qemu_conf.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c index 77ef4fe..5ed5776 100644 --- a/src/qemu/qemu_conf.c +++ b/src/qemu/qemu_conf.c @@ -324,6 +324,7 @@ virQEMUDriverConfigPtr virQEMUDriverConfigNew(bool privileged) cfg->seccompSandbox = -1; cfg->logTimestamp = true; + cfg->stdioLogD = true; #ifdef DEFAULT_LOADER_NVRAM if (virQEMUDriverConfigLoaderNVRAMParse(cfg, DEFAULT_LOADER_NVRAM) < 0) @@ -812,8 +813,6 @@ int virQEMUDriverConfigLoadFile(virQEMUDriverConfigPtr cfg, goto cleanup; } VIR_FREE(stdioHandler); - } else { - cfg->stdioLogD = true; } GET_VALUE_ULONG("max_queued", cfg->maxQueuedJobs); -- 2.8.1

2 2