February 2016 - Devel - libvirt List Archives

[libvirt] [PATCH] qemu: Move PORT definitions to qemu_conf.c
by Cole Robinson 17 Feb '16

17 Feb '16

Which is the only user. That was the only reason for including qemu_command.h, though we need to explicitly include qemu_domain.h afterwards. --- Had this sitting in a branch. jferlan: this is in your neck of the woods, not sure if it's going to conflict with any of your reorg patches though... src/qemu/qemu_command.h | 16 ---------------- src/qemu/qemu_conf.c | 18 +++++++++++++++++- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/src/qemu/qemu_command.h b/src/qemu/qemu_command.h index 776954e..fb684d0 100644 --- a/src/qemu/qemu_command.h +++ b/src/qemu/qemu_command.h @@ -39,22 +39,6 @@ # define QEMU_DRIVE_HOST_PREFIX "drive-" # define QEMU_FSDEV_HOST_PREFIX "fsdev-" -/* These are only defaults, they can be changed now in qemu.conf and - * explicitly specified port is checked against these two (makes - * sense to limit the values). - * - * This limitation is mentioned in qemu.conf, so bear in mind that the - * configuration file should reflect any changes made to these values. - */ -# define QEMU_REMOTE_PORT_MIN 5900 -# define QEMU_REMOTE_PORT_MAX 65535 - -# define QEMU_WEBSOCKET_PORT_MIN 5700 -# define QEMU_WEBSOCKET_PORT_MAX 65535 - -# define QEMU_MIGRATION_PORT_MIN 49152 -# define QEMU_MIGRATION_PORT_MAX 49215 - VIR_ENUM_DECL(qemuVideo) typedef struct _qemuBuildCommandLineCallbacks qemuBuildCommandLineCallbacks; diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c index 14683f5..fd3055f 100644 --- a/src/qemu/qemu_conf.c +++ b/src/qemu/qemu_conf.c @@ -36,8 +36,8 @@ #include "virerror.h" #include "qemu_conf.h" -#include "qemu_command.h" #include "qemu_capabilities.h" +#include "qemu_domain.h" #include "viruuid.h" #include "virbuffer.h" #include "virconf.h" @@ -58,6 +58,22 @@ VIR_LOG_INIT("qemu.qemu_conf"); +/* These are only defaults, they can be changed now in qemu.conf and + * explicitly specified port is checked against these two (makes + * sense to limit the values). + * + * This limitation is mentioned in qemu.conf, so bear in mind that the + * configuration file should reflect any changes made to these values. + */ +#define QEMU_REMOTE_PORT_MIN 5900 +#define QEMU_REMOTE_PORT_MAX 65535 + +#define QEMU_WEBSOCKET_PORT_MIN 5700 +#define QEMU_WEBSOCKET_PORT_MAX 65535 + +#define QEMU_MIGRATION_PORT_MIN 49152 +#define QEMU_MIGRATION_PORT_MAX 49215 + static virClassPtr virQEMUDriverConfigClass; static void virQEMUDriverConfigDispose(void *obj); -- 2.5.0

2 2

[libvirt] [PATCH] libvirt-guests: emit most messages to stderr
by Michael Chapman 17 Feb '16

17 Feb '16

Some of the shell functions in this script (e.g. check_guests_shutdown) produce output that is captured and processed by other parts of the script. Any error messages from these shell functions must go to stderr, not stdout. Rather than trying to determine which messages are safe for stdout and which are not (and maintaining this safety as the script is refactored), simplify things by emitting all messages to stderr, except for the output from gueststatus(), rh_status() and usage(). Signed-off-by: Michael Chapman <mike(a)very.puzzling.org> --- tools/libvirt-guests.sh.in | 94 +++++++++++++++++++++++----------------------- 1 file changed, 47 insertions(+), 47 deletions(-) diff --git a/tools/libvirt-guests.sh.in b/tools/libvirt-guests.sh.in index 7f74b85..80b1ec7 100644 --- a/tools/libvirt-guests.sh.in +++ b/tools/libvirt-guests.sh.in @@ -92,16 +92,16 @@ test_connect() i=${CONNECT_RETRIES} while [ $i -gt 0 ]; do - run_virsh "$uri" connect 2>/dev/null + run_virsh "$uri" connect >/dev/null 2>/dev/null if [ $? -eq 0 ]; then return 0; fi sleep ${RETRIES_SLEEP} - eval_gettext "Unable to connect to libvirt currently. Retrying .. \$i" + eval_gettext "Unable to connect to libvirt currently. Retrying .. \$i" >&2 i=$(($i-1)) done - eval_gettext "Can't connect to \$uri. Skipping." - echo + eval_gettext "Can't connect to \$uri. Skipping." >&2 + echo >&2 return 1 } @@ -163,8 +163,8 @@ start() { [ -f "$LISTFILE" ] || { started; return 0; } if [ "x$ON_BOOT" != xstart ]; then - gettext "libvirt-guests is configured not to start any guests on boot" - echo + gettext "libvirt-guests is configured not to start any guests on boot" >&2 + echo >&2 rm -f "$LISTFILE" started return 0 @@ -187,19 +187,19 @@ start() { done set +f if ! "$configured"; then - eval_gettext "Ignoring guests on \$uri URI"; echo + eval_gettext "Ignoring guests on \$uri URI" >&2; echo >&2 continue fi test_connect "$uri" || continue - eval_gettext "Resuming guests on \$uri URI..."; echo + eval_gettext "Resuming guests on \$uri URI..." >&2; echo >&2 for guest in $list; do name=$(guest_name "$uri" "$guest") - eval_gettext "Resuming guest \$name: " + eval_gettext "Resuming guest \$name: " >&2 if guest_is_on "$uri" "$guest"; then if "$guest_running"; then - gettext "already active"; echo + gettext "already active" >&2; echo >&2 else if "$isfirst"; then isfirst=false @@ -208,7 +208,7 @@ start() { fi retval run_virsh "$uri" start $bypass "$name" \ >/dev/null && \ - gettext "done"; echo + gettext "done" >&2; echo >&2 if "$sync_time"; then run_virsh "$uri" domtime --sync "$name" >/dev/null fi @@ -234,7 +234,7 @@ suspend_guest() bypass= slept=0 test "x$BYPASS_CACHE" = x0 || bypass=--bypass-cache - printf '%s...\n' "$label" + printf '%s...\n' "$label" >&2 run_virsh "$uri" managedsave $bypass "$guest" >/dev/null & virsh_pid=$! while true; do @@ -246,9 +246,9 @@ suspend_guest() progress=$(run_virsh_c "$uri" domjobinfo "$guest" 2>/dev/null | \ awk '/^Data processed:/{print $3, $4}') if [ -n "$progress" ]; then - printf '%s%s\n' "$label" "$progress" + printf '%s%s\n' "$label" "$progress" >&2 else - printf '%s%s\n' "$label" "..." + printf '%s%s\n' "$label" "..." >&2 fi fi done @@ -264,8 +264,8 @@ shutdown_guest() guest=$2 name=$(guest_name "$uri" "$guest") - eval_gettext "Starting shutdown on guest: \$name" - echo + eval_gettext "Starting shutdown on guest: \$name" >&2 + echo >&2 retval run_virsh "$uri" shutdown "$guest" >/dev/null || return timeout=$SHUTDOWN_TIMEOUT check_timeout=false @@ -283,24 +283,24 @@ shutdown_guest() if $check_timeout; then if [ $(($timeout % 5)) -eq 0 ]; then - printf "$format" "$name" "$timeout" + printf "$format" "$name" "$timeout" >&2 fi timeout=$(($timeout - 1)) else slept=$(($slept + 1)) if [ $(($slept % 5)) -eq 0 ]; then - printf "$format" "$name" + printf "$format" "$name" >&2 fi fi done if guest_is_on "$uri" "$guest"; then if "$guest_running"; then - eval_gettext "Shutdown of guest \$name failed to complete in time." + eval_gettext "Shutdown of guest \$name failed to complete in time." >&2 else - eval_gettext "Shutdown of guest \$name complete." + eval_gettext "Shutdown of guest \$name complete." >&2 fi - echo + echo >&2 fi } @@ -313,8 +313,8 @@ shutdown_guest_async() guest=$2 name=$(guest_name "$uri" "$guest") - eval_gettext "Starting shutdown on guest: \$name" - echo + eval_gettext "Starting shutdown on guest: \$name" >&2 + echo >&2 retval run_virsh "$uri" shutdown "$guest" > /dev/null } @@ -337,8 +337,8 @@ check_guests_shutdown() guests_up= for guest in $guests; do if ! guest_is_on "$uri" "$guest" >/dev/null 2>&1; then - eval_gettext "Failed to determine state of guest: \$guest. Not tracking it anymore." - echo + eval_gettext "Failed to determine state of guest: \$guest. Not tracking it anymore." >&2 + echo >&2 continue fi if "$guest_running"; then @@ -363,8 +363,8 @@ print_guests_shutdown() esac name=$(guest_name "$uri" "$guest") - eval_gettext "Shutdown of guest \$name complete." - echo + eval_gettext "Shutdown of guest \$name complete." >&2 + echo >&2 done } @@ -404,18 +404,18 @@ shutdown_guests_parallel() if $check_timeout; then if [ $(($timeout % 5)) -eq 0 ]; then - printf "$format" $(($guestcount + $shutdowncount)) "$timeout" + printf "$format" $(($guestcount + $shutdowncount)) "$timeout" >&2 fi timeout=$(($timeout - 1)) if [ $timeout -le 0 ]; then - eval_gettext "Timeout expired while shutting down domains"; echo + eval_gettext "Timeout expired while shutting down domains" >&2; echo >&2 RETVAL=1 return fi else slept=$(($slept + 1)) if [ $(($slept % 5)) -eq 0 ]; then - printf "$format" $(($guestcount + $shutdowncount)) + printf "$format" $(($guestcount + $shutdowncount)) >&2 fi fi @@ -435,8 +435,8 @@ stop() { if [ "x$ON_SHUTDOWN" = xshutdown ]; then suspending=false if [ $SHUTDOWN_TIMEOUT -lt 0 ]; then - gettext "SHUTDOWN_TIMEOUT must be equal or greater than 0" - echo + gettext "SHUTDOWN_TIMEOUT must be equal or greater than 0" >&2 + echo >&2 RETVAL=6 return fi @@ -449,21 +449,21 @@ stop() { test_connect "$uri" || continue - eval_gettext "Running guests on \$uri URI: " + eval_gettext "Running guests on \$uri URI: " >&2 list=$(list_guests "$uri") if [ $? -eq 0 ]; then empty=true for uuid in $list; do - "$empty" || printf ", " - printf %s "$(guest_name "$uri" "$uuid")" + "$empty" || printf ", " >&2 + printf %s "$(guest_name "$uri" "$uuid")" >&2 empty=false done if "$empty"; then - gettext "no running guests." + gettext "no running guests." >&2 fi - echo + echo >&2 fi if "$suspending"; then @@ -472,26 +472,26 @@ stop() { empty=true for uuid in $transient; do if "$empty"; then - eval_gettext "Not suspending transient guests on URI: \$uri: " + eval_gettext "Not suspending transient guests on URI: \$uri: " >&2 empty=false else - printf ", " + printf ", " >&2 fi - printf %s "$(guest_name "$uri" "$uuid")" + printf %s "$(guest_name "$uri" "$uuid")" >&2 done - echo + echo >&2 # reload domain list to contain only persistent guests list=$(list_guests "$uri" "--persistent") if [ $? -ne 0 ]; then - eval_gettext "Failed to list persistent guests on \$uri" - echo + eval_gettext "Failed to list persistent guests on \$uri" >&2 + echo >&2 RETVAL=1 set +f return fi else - gettext "Failed to list transient guests" - echo + gettext "Failed to list transient guests" >&2 + echo >&2 RETVAL=1 set +f return @@ -507,9 +507,9 @@ stop() { if [ -s "$LISTFILE" ]; then while read uri list; do if "$suspending"; then - eval_gettext "Suspending guests on \$uri URI..."; echo + eval_gettext "Suspending guests on \$uri URI..." >&2; echo >&2 else - eval_gettext "Shutting down guests on \$uri URI..."; echo + eval_gettext "Shutting down guests on \$uri URI..." >&2; echo >&2 fi if [ "$PARALLEL_SHUTDOWN" -gt 1 ] && -- 2.4.3

2 3

[libvirt] [PATCH 0/6] NSS module for libvirt
by Michal Privoznik 17 Feb '16

17 Feb '16

Are you tired of remembering IP addresses for your domains? Do you have enough of configuring static IPs so that you can add them to your hosts file? Then libvirt NSS module is exactly what you need! NSS does a lot in a Linux host. These patches aim at translating domain names into IP addresses. All you need to do, is install libnss_libvirt.so.2 (e.g. via 'make install' ran from source dir), enable the module in nsswitch.conf: $ grep libvirt /etc/nsswitch.conf hosts: files dns libvirt and you're all set. Now you can just: $ ping $mydomain $ ssh user@$mydomain or anything you'd like. The only limitation is that it has to be libvirt who has assigned the domain IP address. The limitation comes from implementation in which '/var/lib/libvirt/dnsmasq/*.status' files are parsed when looking up a hostname. What's beautiful on this feature is that it helps any users regardless of their systemd attitude. On systemd hosts there already exists a similar module 'mymachines' which takes its data from machined. And libvirt does communicate with machined when creating a domain. But unfortunately at that time we know nothing about guest's IPs and therefore do not tell them to machined, which in turn can't tell anything to mymachines module. To make things worse, machined seems to be lacking an API to tell it the addresses later on when libvirt finds out. Therefore even systemd distros will benefit from this feature. If the feature makes its way in, I'll describe all the steps in a wiki (hence, no documentation in this patch set - although, if you have a bright idea where should I put it, I'm all ears). Enjoy! Michal Privoznik (6): Export virLease* functions for leases file handling virjson: Resolve const correctness Initial support for NSS plugin skeleton nss: Implement _nss_libvirt_gethostbyname3_r Implement _nss_libvirt_gethostbyname4_r nss: Introduce a test cfg.mk | 2 +- configure.ac | 2 + m4/virt-nss.m4 | 51 ++++++ po/POTFILES.in | 1 + src/Makefile.am | 1 + src/libvirt_private.syms | 6 + src/network/leaseshelper.c | 271 +-------------------------- src/util/virjson.c | 58 +++--- src/util/virjson.h | 54 +++--- src/util/virlease.c | 304 ++++++++++++++++++++++++++++++ src/util/virlease.h | 44 +++++ tests/Makefile.am | 18 ++ tests/nssdata/virbr0.status | 14 ++ tests/nssmock.c | 140 ++++++++++++++ tests/nsstest.c | 184 +++++++++++++++++++ tools/Makefile.am | 45 +++++ tools/nss/libvirt_nss.c | 436 ++++++++++++++++++++++++++++++++++++++++++++ tools/nss/libvirt_nss.h | 52 ++++++ tools/nss/libvirt_nss.syms | 12 ++ 19 files changed, 1368 insertions(+), 327 deletions(-) create mode 100644 m4/virt-nss.m4 create mode 100644 src/util/virlease.c create mode 100644 src/util/virlease.h create mode 100644 tests/nssdata/virbr0.status create mode 100644 tests/nssmock.c create mode 100644 tests/nsstest.c create mode 100644 tools/nss/libvirt_nss.c create mode 100644 tools/nss/libvirt_nss.h create mode 100644 tools/nss/libvirt_nss.syms -- 2.4.10

3 14

[libvirt] devAlias correct parsing
by Alexander Burluka 17 Feb '16

17 Feb '16

Hello, I would be grateful if you help me with next thing: I've successfully subscribed on VIR_DOMAIN_EVENT_ID_TRAY_CHANGE event in my application (QEMU based). It perfectly works and returns to me an device alias (e.g. "drive-scsi0-0-1-0"). Of course I can split this string by delimiter '-'. However, I've found private virDomainDefFindDevice function within libvirt and seems that its make correct parsing. How can I use it in my code? Thank you! -- Regards, Alexander Burluka

2 2

[libvirt] [PATCH] vircgroup: Update virCgroupDenyDevicePath stub
by Michal Privoznik 17 Feb '16

17 Feb '16

In cf113e8d we changed the declaration of virCgroupAllowDevicePath() and virCgroupDenyDevicePath(). However, while updating the stub for non-cgroup platforms for the former we forgot to update the latter too causing a build failure. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- Pushed under trivial and build-breaker rules. src/util/vircgroup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/src/util/vircgroup.c b/src/util/vircgroup.c index d032c60..38398fd 100644 --- a/src/util/vircgroup.c +++ b/src/util/vircgroup.c @@ -4689,7 +4689,8 @@ virCgroupDenyDevice(virCgroupPtr group ATTRIBUTE_UNUSED, int virCgroupDenyDevicePath(virCgroupPtr group ATTRIBUTE_UNUSED, const char *path ATTRIBUTE_UNUSED, - int perms ATTRIBUTE_UNUSED) + int perms ATTRIBUTE_UNUSED, + bool ignoreEacces ATTRIBUTE_UNUSED) { virReportSystemError(ENOSYS, "%s", _("Control groups not supported on this platform")); -- 2.4.10

1 0

[libvirt] [PATCH 0/2] Clean up rest of migration code
by Peter Krempa 17 Feb '16

17 Feb '16

As requested in review. Peter Krempa (2): qemu: monitor: Remove unused qemuMonitorMigrateToFile qemu: Remove unnecessary calculations in qemuDomainSaveMemory src/qemu/qemu_driver.c | 30 ++---------------------- src/qemu/qemu_monitor.c | 61 ------------------------------------------------- src/qemu/qemu_monitor.h | 17 -------------- 3 files changed, 2 insertions(+), 106 deletions(-) -- 2.6.2

2 3

[libvirt] [PATCH 00/10] Reorganizing qemu_command.c continued
by John Ferlan 17 Feb '16

17 Feb '16

Figure I'll do these in smaller chunks - it's a large module. Suffice to say there's a lot of "movement" and patches for each is tedius, but I hope in the end it will be easier to deal with. For the most part all patches are primarily code motion, although git diff may have you believe otherwise. Essentially, I'm starting at the top of qemuBuildCommandLine and working my way through either moving functions in a top down order from the beginning of the module or more usually creating a qemuBuildXXXXCommandLine function and calling it from the main processing code. I did not "manage" any of the QEMU_CAPS_DEVICE changes (e.g, remove code), but I could while I'm at if that's desired. Hopefully not many people are touching this module right now ;-)! John Ferlan (10): qemu: Move qemuDeviceDriveHostAlias qemu: Remove local emulator qemu: Make basic upfront checks before creating command qemu: Reorganize -machine arguments qemu: Reorganize -cpu arguments qemu: Reorganize qemuBuildDomainLoaderCommandLine call qemu: Reorganize -m arguments qemu: Reorganize -smp argument qemu: Reorganize IOThread -object arguments qemu: Reorganize -numa arguments src/qemu/qemu_alias.c | 16 + src/qemu/qemu_alias.h | 4 + src/qemu/qemu_command.c | 9010 ++++++++++++++++++++++++----------------------- src/qemu/qemu_command.h | 3 - src/qemu/qemu_hotplug.c | 6 +- 5 files changed, 4583 insertions(+), 4456 deletions(-) -- 2.5.0

2 18

[libvirt] [PATCH] syms: add forgotten virAdmConnectClass symbol
by Erik Skultety 17 Feb '16

17 Feb '16

Although it currently doesn't cause any linking issues, the symbol should be exported correctly according to our conventions. --- Pushed under trivial rule. src/libvirt_admin_private.syms | 1 + 1 file changed, 1 insertion(+) diff --git a/src/libvirt_admin_private.syms b/src/libvirt_admin_private.syms index ffaf4f3..f22137b 100644 --- a/src/libvirt_admin_private.syms +++ b/src/libvirt_admin_private.syms @@ -12,6 +12,7 @@ xdr_admin_connect_list_servers_ret; xdr_admin_connect_open_args; # datatypes.h +virAdmConnectClass; virAdmGetServer; virAdmServerClass; -- 2.4.3

1 0

[libvirt] [PATCH v4 0/7] admin: Introduce server listing API
by Erik Skultety 17 Feb '16

17 Feb '16

Since v3: - refactors to virHashForEach and hash iterators - servers are now stored in a hash table instead of an array - added forgotten virObjectLock in remoteAdminConnectListServers Erik Skultety (7): util: Add a return value to void hash iterators util: Refactor virHashForEach so it returns as soon as an iterator fails virnetdaemon: Store servers in a hash table admin: Move admin_server.{h,c} to admin.{h,c} admin: Introduce virAdmServer structure admin: Introduce adminDaemonConnectListServers API virt-admin: Introduce cmdSrvList daemon/Makefile.am | 5 +- daemon/admin.c | 181 +++++++++++++++ daemon/admin.h | 36 +++ daemon/admin_server.c | 111 +++------- daemon/admin_server.h | 26 +-- daemon/libvirtd.c | 6 +- include/libvirt/libvirt-admin.h | 25 ++- po/POTFILES.in | 3 +- src/admin/admin_protocol.x | 26 ++- src/admin/admin_remote.c | 71 ++++++ src/admin_protocol-structs | 15 ++ src/conf/network_conf.c | 15 +- src/conf/nwfilter_params.c | 8 +- src/conf/snapshot_conf.c | 31 +-- src/conf/virchrdev.c | 7 +- src/conf/virdomainobjlist.c | 17 +- src/datatypes.c | 35 +++ src/datatypes.h | 38 ++++ src/libvirt-admin.c | 79 +++++++ src/libvirt_admin_private.syms | 5 + src/libvirt_admin_public.syms | 3 + src/locking/lock_daemon.c | 10 +- src/logging/log_daemon.c | 3 +- src/lxc/lxc_controller.c | 2 +- src/nwfilter/nwfilter_dhcpsnoop.c | 3 +- src/nwfilter/nwfilter_gentech_driver.c | 5 +- src/qemu/qemu_domain.c | 7 +- src/qemu/qemu_domain.h | 6 +- src/qemu/qemu_driver.c | 13 +- src/rpc/virnetdaemon.c | 225 +++++++++++++------ src/rpc/virnetdaemon.h | 8 +- src/test/test_driver.c | 14 +- src/uml/uml_driver.c | 13 +- src/util/virclosecallbacks.c | 9 +- src/util/virhash.c | 28 ++- src/util/virhash.h | 6 +- src/xen/xm_internal.c | 7 +- tests/virhashtest.c | 54 +++-- .../input-data-admin-server-names.json | 129 +++++++++++ .../virnetdaemondata/output-data-admin-nomdns.json | 8 +- .../output-data-admin-server-names.json | 126 +++++++++++ .../virnetdaemondata/output-data-anon-clients.json | 6 +- .../output-data-initial-nomdns.json | 6 +- tests/virnetdaemondata/output-data-initial.json | 6 +- .../output-data-no-keepalive-required.json | 242 +++++++++++---------- tests/virnetdaemontest.c | 63 +++--- tools/virt-admin.c | 61 ++++++ 47 files changed, 1361 insertions(+), 442 deletions(-) create mode 100644 daemon/admin.c create mode 100644 daemon/admin.h create mode 100644 tests/virnetdaemondata/input-data-admin-server-names.json create mode 100644 tests/virnetdaemondata/output-data-admin-server-names.json -- 2.4.3

2 13

[libvirt] [PATCH 00/10] Setup cgroups for firmware devices and related refactors
by Peter Krempa 17 Feb '16

17 Feb '16

Peter Krempa (10): qemu: cgroup: Remove abandoned function qemuAddToCgroup qemu: migration: Refactor code now that we assume support for fd migration util: cgroup: Instrument virCgroupDenyDevice to handle -1 device number as * util: cgroup: Drop virCgroup(Allow|Deny)DeviceMajor util: cgroup: Allow ignoring EACCES in virCgroup(Allow|Deny)DevicePath qemu: cgroup: Avoid reporting errors from inaccessible NFS volumes qemu: cgroup: Switch to qemu(Setup|Teardown)ImageCgroup qemu: cgroup: Split up qemuSetImageCgroupInternal qemu: cgroup: Extract guts of qemuSetupImageCgroupInternal qemu: cgroup: Setup cgroups for bios/firmware images src/libvirt_private.syms | 2 - src/lxc/lxc_cgroup.c | 16 ++--- src/lxc/lxc_driver.c | 9 ++- src/qemu/qemu_cgroup.c | 151 +++++++++++++++++++++++++++------------------- src/qemu/qemu_cgroup.h | 8 +-- src/qemu/qemu_driver.c | 8 +-- src/qemu/qemu_migration.c | 114 ++++++++++++---------------------- src/qemu/qemu_migration.h | 2 +- src/util/vircgroup.c | 142 ++++++++++++++----------------------------- src/util/vircgroup.h | 14 ++--- 10 files changed, 199 insertions(+), 267 deletions(-) -- 2.6.2

2 21