February 2015 - Devel - libvirt List Archives

[libvirt] [PATCH] qemu: Check for negative port values in network drive configuration
by Erik Skultety 16 Mar '15

16 Mar '15

We interpret port values as signed int (convert them from char *), so if a negative value is provided in network disk's configuration, we accept it as valid, however there's an 'unknown cause' error raised later. This error is only accidental because we return the port value in the return code. This patch adds just a minor tweak to the already existing check so we reject negative values the same way as we reject non-numerical strings. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1163553 --- src/qemu/qemu_command.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 743d6f0..c1e9559 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -2954,7 +2954,7 @@ qemuNetworkDriveGetPort(int protocol, int ret = 0; if (port) { - if (virStrToLong_i(port, NULL, 10, &ret) < 0) { + if (virStrToLong_i(port, NULL, 10, &ret) < 0 || ret < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("failed to parse port number '%s'"), port); -- 1.9.3

4 4

[libvirt] [libvirt-test-API][PATCH 0/2] Add coredump_with_format test case
by jiahu 13 Mar '15

13 Mar '15

The coredump_with_format.py uses coreDumpWithFormat() to validate new API virDomainCoreDumpWithFormat of libvirt. jiahu (2): Add coredump_with_format test case Add coredump_with_format test case to linux_domain conf cases/linux_domain.conf | 44 +++++++ repos/domain/coredump_with_format.py | 239 +++++++++++++++++++++++++++++++++++ 2 files changed, 283 insertions(+) create mode 100644 repos/domain/coredump_with_format.py -- 1.8.3.1

2 3

[libvirt] [libvirt-test-API][PATCH] Rewrite case for listAllInterfaces() API
by jiahu 12 Mar '15

12 Mar '15

Using actual python API to validate test case, rather than use virsh iface-* command lines. --- cases/basic_interface.conf | 12 ++ repos/interface/iface_list.py | 299 ++++++++++++------------------------------ 2 files changed, 99 insertions(+), 212 deletions(-) diff --git a/cases/basic_interface.conf b/cases/basic_interface.conf index e2125bb..43e37e8 100644 --- a/cases/basic_interface.conf +++ b/cases/basic_interface.conf @@ -15,3 +15,15 @@ interface:define interface:create ifacename $testnic + +interface:iface_list + flags + all + +interface:iface_list + flags + active + +interface:iface_list + flags + inactive diff --git a/repos/interface/iface_list.py b/repos/interface/iface_list.py index 49f0c05..85f9df9 100644 --- a/repos/interface/iface_list.py +++ b/repos/interface/iface_list.py @@ -1,65 +1,26 @@ #!/usr/bin/env python +# test listAllInterfaces() API import os -import sys -import re -import commands +import libvirt -required_params = ('ifaceopt',) -optional_params = {} - -VIRSH_QUIET_IFACE_LIST = "virsh --quiet iface-list %s | awk '{print ""$%s""}'" -NETWORK_CONFIG = "/etc/sysconfig/network-scripts/" -IFCONFIG_DRIVER = "ifconfig %s | sed 's/[ \t].*//;/^$/d'" -GET_MAC = "ip link show %s |sed -n '2p'| awk '{print $2}'" -VIRSH_IFACE_LIST = "virsh iface-list %s" - -names = [] -state = [] -macs = [] - -def get_option_list(params): - """return options we need to test - """ - logger = params['logger'] - option_list=[] +from libvirt import libvirtError +from src import sharedmod +from utils import utils - value = params['ifaceopt'] - if value == 'all': - option_list = [' ', '--all', '--inactive'] - elif value == '--all' or value == '--inactive': - option_list.append(value) - else: - logger.error("value %s is not supported" % value) - return 1, option_list +required_params = ('flags',) +optional_params = {} - return 0, option_list +NETWORK_CONFIG = "/etc/sysconfig/network-scripts/" +IFCONFIG_DRIVER = "ifconfig %s | sed 's/[ \t].*//;/^$/d'| cut -d \":\" -f -1" -def get_output(command, logger): - """execute shell command +def get_inteface_list_from_ifcfg(logger): + """ + return host interface list from ifcfg-* """ - status, ret = commands.getstatusoutput(command) - if status: - logger.error("executing "+ "\"" + command + "\"" + " failed") - logger.error(ret) - return status, ret - -def get_interface_list(option, logger): - """ return active host interface list """ - interface_list = [] - status, interface_str = get_output(IFCONFIG_DRIVER % option, logger) - if not status: - interface_list = interface_str.split('\n') - return interface_list - else: - logger.error("\"" + IFCONFIG_DRIVER % option + "\"" + "error") - logger.error(interface_str) - return interface_list - -def check_ifacename(names, option, logger): - """ verify the validity of output data """ ifcfg_files = [] + nic_names = [] for f in os.listdir(NETWORK_CONFIG): if f.startswith("ifcfg-"): f_path = os.path.join(NETWORK_CONFIG, f) @@ -67,18 +28,6 @@ def check_ifacename(names, option, logger): ifcfg_files.append(f_path) else: logger.warn("%s is not a regular file" % f_path) - - interface_active = get_interface_list('', logger) - logger.debug("list of active host interface: %s" % interface_active) - if interface_active == None: - return 1 - - interface_all = get_interface_list('-a', logger) - logger.debug("list of all host interface: %s" % interface_all) - if interface_all == None: - return 1 - - for ifcfg_file in ifcfg_files: fp = open(ifcfg_file, 'r') fp.seek(0,0) @@ -87,165 +36,91 @@ def check_ifacename(names, option, logger): device_str = eachLine.rstrip() nic_string = device_str.split("=")[1] if nic_string.startswith("\""): - nic_name = nic_string[1:-1] + nic_names = nic_string[1:-1] else: - nic_name = nic_string + nic_names.append(nic_string) break - fp.close() + return list(set(nic_names)) - if option == ' ': - if nic_name not in interface_active: - continue - else: - if nic_name in names: - logger.info("it contains interface %s in %s" % (nic_name, ifcfg_file)) - else: - logger.error("interface %s in %s couldn't \n\ - be in the output of virsh iface-list with option %s" % \ - (nic_name, ifcfg_file, option)) - return 1 - elif option == '--all': - if nic_name in names: - logger.info("it contains interface %s in %s" % (nic_name, ifcfg_file)) - else: - logger.error("interface %s in %s couldn't \n\ - be in the output of virsh iface-list with option %s" % \ - (nic_name, ifcfg_file, option)) - - return 1 - elif option == '--inactive': - if nic_name in interface_active: - continue - else: - if nic_name in names: - logger.info("it contains interface %s in %s" % (nic_name, ifcfg_file)) - else: - logger.error("interface %s in %s couldn't \n\ - be in the output of virsh iface-list with option %s" % \ - (nic_name, ifcfg_file, option)) - return 1 - - return 0 - -def check_ifacestate(names, state, logger): - """ check the state of give host interface """ - - interface_active = get_interface_list('', logger) - if interface_active == None: - return 1 - - interface_all = get_interface_list('-a', logger) - if interface_all == None: - return 1 - - index = 0 - count = len(names) - while(index < count): - if names[index] in interface_active and state[index] == 'active': - logger.info("interface %s is %s" % (names[index], state[index])) - elif names[index] not in interface_active and \ - names[index] in interface_all and \ - state[index] == 'inactive': - logger.info("interface %s is %s" % (names[index], state[index])) - else: - logger.error("interface %s is %s, but not we expected" % \ - (names[index], state[index])) - return 1 - - index = index + 1 - - return 0 - -def check_ifacemac(names, macs, logger): - """ check if the mac corresponding to approriate name is correct """ - index = 0 - count = len(names) - while(index < count): - status, mac_shell = get_output(GET_MAC % names[index], logger) - if not status: - if mac_shell == macs[index]: - logger.info("interface %s's mac address is %s" % \ - (names[index], macs[index])) - else: - logger.error("interface %s's mac address from iface-list: %s \ - is different from one from ip link show: %s" % \ - (name[index], macs[indesx], mac_shell)) - return 1 - index = index + 1 - - return 0 - -def iface_list_output(option, logger): - """ check the output of virsh iface-list with appropriate option """ - global names, state, macs - - status, ret = get_output(VIRSH_QUIET_IFACE_LIST % (option, 1), logger) - if not status: - names = ret.split('\n') - logger.info("interface names from option '%s' : %s" % (option, names)) - - else: - return 1 - - status, ret = get_output(VIRSH_QUIET_IFACE_LIST % (option, 2), logger) - if not status: - state = ret.split('\n') - logger.info("interface state from option '%s' : %s" % (option, state)) - else: - return 1 - - status, ret = get_output(VIRSH_QUIET_IFACE_LIST % (option, 3), logger) +def get_interface_list(option, logger): + """ + return host interface list + """ + nic_names = [] + status, nic_names = utils.exec_cmd(IFCONFIG_DRIVER % option, shell=True) if not status: - macs = ret.split('\n') - logger.info("interface macs from option '%s' : %s" % (option, macs)) + return nic_names else: - return 1 + logger.error("\"" + IFCONFIG_DRIVER % option + "\"" + "error") + logger.error(nic_names) + return nic_names - return 0 +def iface_list_output_from_ifconfig(flags, logger): + """ + get all host interface using ifconfig command + """ + nic_names = [] + if flags == 0: + nic_names = get_interface_list('-a', logger) + elif flags == 1: + interface_all = get_interface_list('-a', logger) + interface_active = get_interface_list('', logger) + nic_names = list(set(interface_all) - set(interface_active)) + elif flags == 2: + nic_names = get_interface_list('', logger) + + if nic_names == None: + return False + return nic_names + +def iface_list_output_from_api(flags,logger): + """ + get interface list using listAllInterfaces() + """ + nic_names_api = [] + for interface in conn.listAllInterfaces(flags): + nic_names_api.append(str(interface.name())) + return nic_names_api def iface_list(params): - """ test the validity of the output of iface_list with - default, --all, --inactive option, including - interface name, state, and mac + """ + test listAllInterfaces() api """ + global conn logger = params['logger'] - ret, option_list = get_option_list(params) - global names, state, macs - - if ret: - return 1 - - for option in option_list: - logger.info("CHECK the output of virsh pool-list with option '%s'" % option) - logger.info("get the name, corresponding state and mac address of interfaces") - if iface_list_output(option, logger): - logger.error("faied to name, state, and mac from iface-list") - return 1 + flags = params['flags'] + conn = sharedmod.libvirtobj['conn'] + logger.info("The given flags is %s " % flags) + if flags == "all": + flag = 0 + elif flags == "inactive": + flag = 1 + elif flags == "active": + flag = 2 + try: + iface_list = iface_list_output_from_api(flag, logger) + iface_list_ifconfig = iface_list_output_from_ifconfig(flag, logger) + if iface_list_ifconfig == False: + return 1 + ifcfg = get_inteface_list_from_ifcfg(logger) + logger.info("interface list from API: %s" % iface_list) + logger.debug("interface list from ifcfg: %s" % ifcfg) + for interface in iface_list_ifconfig: + if interface not in ifcfg: + iface_list_ifconfig.remove(interface) + logger.debug("%s has not regular ifcfg file" % interface) + + logger.info("interface list from ifconfig cmd: %s" % iface_list_ifconfig) + for interface in iface_list: + if interface in iface_list_ifconfig: + logger.debug("%s :Pass" % interface) else: - logger.info("then, check the validity of these interface names") - if check_ifacename(names, option, logger): - logger.error("checking interface names FAILED") - return 1 - else: - logger.info("checking interface names SUCCESSFULLY") - - logger.info("check the state of these interfaces") - if check_ifacestate(names, state, logger): - logger.error("checking interface state FAILED") - return 1 - else: - logger.info("checking interface state SUCCESSFULLY") - - logger.info("check the interface mac address") - if check_ifacemac(names, macs, logger): - logger.error("checking interface mac address FAILED") - return 1 - else: - logger.info("checking interface mac address SUCESSFULLY") - - status, ret = get_output(VIRSH_IFACE_LIST % option, logger) - if not status: - logger.info("\n" + ret) + logger.debug("%s :Fail" % interface) + return 1 + + except libvirtError, e: + logger.error("API error message: %s" % e.message) + return 1 return 0 -- 1.8.3.1

2 1

[libvirt] [PATCHv2 0/4]add support for graphics to get a IPv6 address
by Luyao Huang 11 Mar '15

11 Mar '15

https://bugzilla.redhat.com/show_bug.cgi?id=1192318 We already support add a IPv6 address to graphics listen address and xml like this: <graphics type='spice' port='5900' autoport='yes' listen='2001b8:ca2:2::1' keymap='en-us'> <listen type='address' address='2001b8:ca2:2::1'/> </graphics> However we do not support get a IPv6 address for the network. add some helpers and rework networkGetNetworkAddress to make it can get a IPv6 address when we need. Luyao Huang (4): util: introduce 2 new helpers for get interface IPv6 address conf: introduce new family attribute in graphics listen for chose IP family network: rework networkGetNetworkAddress to make it can get IPv6 address qemu: fix a error coverd issue in 2 place docs/formatdomain.html.in | 10 ++- docs/schemas/domaincommon.rng | 8 ++ src/conf/domain_conf.c | 20 +++++ src/conf/domain_conf.h | 9 ++ src/libvirt_private.syms | 1 + src/network/bridge_driver.c | 15 ++-- src/network/bridge_driver.h | 6 +- src/qemu/qemu_command.c | 22 +++-- src/util/virnetdev.c | 98 ++++++++++++++++++++++ src/util/virnetdev.h | 4 + .../qemuxml2argv-graphics-listen-network-ipv6.xml | 35 ++++++++ .../qemuxml2argv-graphics-listen-network.xml | 2 +- .../qemuxml2xmlout-graphics-listen-network2.xml | 2 +- tests/qemuxml2xmltest.c | 1 + 14 files changed, 209 insertions(+), 24 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-graphics-listen-network-ipv6.xml -- 1.8.3.1

3 19

[libvirt] [libvirt-test-API][PATCH 0/2] Add securitylabel test case
by jiahu 11 Mar '15

11 Mar '15

The test case will check securityLabel() and securityLabelList() APIs. jiahu (2): Add securitylabel test case to linux_domain.conf Add securitylabel test case cases/linux_domain.conf | 4 + repos/domain/securitylabel.py | 170 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 174 insertions(+) create mode 100644 repos/domain/securitylabel.py -- 1.8.3.1

2 3

[libvirt] [PATCH v2] docs: add a note that spice channel is usable only with spice graphics
by Pavel Hrdina 09 Mar '15

09 Mar '15

To prevent a confusion about missing chardev argument in qemu command line add a note about that behavior into documentation. Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com> --- docs/formatdomain.html.in | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index fb0a0d1..2f2976c 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -5372,6 +5372,10 @@ qemu-kvm -net nic,model=? /dev/null under a channel name specified in the <code>channel</code> attribute. Since 1.2.2 + + Note: in order for the spiceport to be usable, the domain must have + spice graphics as well. + <pre> ... -- 2.0.5

2 2

[libvirt] [PATCH 0/3] update and unify some documentation texts
by Pavel Hrdina 09 Mar '15

09 Mar '15

Pavel Hrdina (3): iface-define: update and unify documentation pool-define: update and unify documentation net-define: update or unify documentation src/libvirt-interface.c | 3 ++- src/libvirt-network.c | 3 ++- src/libvirt-storage.c | 4 ++-- tools/virsh-interface.c | 5 +++-- tools/virsh-network.c | 5 +++-- tools/virsh-pool.c | 5 +++-- tools/virsh.pod | 11 ++++++----- 7 files changed, 21 insertions(+), 15 deletions(-) -- 2.0.5

2 5

[libvirt] [RFC PATCH v2 0/4] Enable spapr-pci-vfio-host-bridge controllers for VFIO passthrough support
by Shivaprasad G Bhat 09 Mar '15

09 Mar '15

The following series of patches enable spapr-pci-vfio-host-bridge controllers on PPC64-pseries machine which is required for supporting host device passthrough using VFIO. There were some initial enablement work on the same at http://www.redhat.com/archives/libvir-list/2013-September/msg00838.html. On pseries(ppc64), the vfio host devices(will refer as hostdevs here on) cannot be assigned to the default emulated pci-host-bus(phb) controller(like the default pci.0). The hostdevs goto spapr-pci-vfio-host-bridge. The hostdevs belonging to the same iommu group share the same spapr-pci-vfio-host-bridge. Henceforth, new spapr-pci-host-bridge needs to be added for every hostdev belonging to any new iommu group. The hostdevs should be attached to their respective spapr-pci-vfio-host-bridge. Libvirt today adds all the devices to the default pci domain. The patch series take care to add the new controller. A new pci domain in the guest per controller is created. The hostdevs get their pci address in the respective domain. The patch series taskes care of device addressing in vfio hostdevs, SR-IOV interfaces and network interfaces from SRIOV virtual function pools. Reference: ====== v1: http://www.redhat.com/archives/libvir-list/2014-October/msg00500.html Changes Since v1: * Some minor code clean up and rebase to latest code base after review with Prerna * Patch 2 : Added logic to remove redundant spapr-vfio controllers. * : Moved domaincommon.rng from Patch 4 to Patch 2. --- Shivaprasad G Bhat (4): qemu: Add SPAPR_VFIO_HOST_BRIDGE capability for PPC platform qemu: parse spapr-vfio-pci controller from xml qemu: assign addresses for spapr vfio hostdevices and generate cli qemu: add test case for spapr-pci-vfio-host-bridge docs/schemas/domaincommon.rng | 28 ++ src/bhyve/bhyve_domain.c | 2 src/conf/domain_addr.c | 8 - src/conf/domain_addr.h | 2 src/conf/domain_conf.c | 165 +++++++++++- src/conf/domain_conf.h | 19 + src/libvirt_private.syms | 2 src/qemu/qemu_capabilities.c | 2 src/qemu/qemu_capabilities.h | 1 src/qemu/qemu_command.c | 276 +++++++++++++++++++- src/qemu/qemu_command.h | 17 + src/qemu/qemu_domain.c | 12 - src/qemu/qemu_driver.c | 6 tests/qemuhotplugtest.c | 2 .../qemuxml2argv-hostdev-spapr-vfio.args | 20 + .../qemuxml2argv-hostdev-spapr-vfio.xml | 75 +++++ tests/qemuxml2argvtest.c | 8 + 17 files changed, 609 insertions(+), 36 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-spapr-vfio.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-spapr-vfio.xml -- Signature

3 10

[libvirt] [PATCHv2 0/7] Automaticaly fill <memory> element for NUMA enabled guests
by Peter Krempa 09 Mar '15

09 Mar '15

This series changes the behavior of the <memory> element in case the guest has NUMA enabled and fills automatically the sum of sizes of numa nodes instead of relying on the user passing correct data. Peter Krempa (7): qemu: Forbid setting maximum memory size with the API with NUMA enabled qemu: lxc: Clarify error message when setting current memory conf: Replace access to def->mem.max_balloon with accessor functions phyp: Fix error messages mentioning memory qemu: command: Add helper to align memory sizes conf: numa: Add helper to count total memory size configured in NUMA conf: Automatically use NUMA memory size in case NUMA is enabled src/conf/domain_conf.c | 72 +++++++++++++++++++--- src/conf/domain_conf.h | 4 ++ src/conf/numa_conf.c | 13 ++++ src/conf/numa_conf.h | 2 + src/hyperv/hyperv_driver.c | 2 +- src/libvirt_private.syms | 4 ++ src/libxl/libxl_conf.c | 2 +- src/libxl/libxl_driver.c | 8 +-- src/lxc/lxc_cgroup.c | 2 +- src/lxc/lxc_driver.c | 28 +++++---- src/lxc/lxc_fuse.c | 4 +- src/lxc/lxc_native.c | 4 +- src/openvz/openvz_driver.c | 2 +- src/parallels/parallels_driver.c | 2 +- src/parallels/parallels_sdk.c | 12 ++-- src/phyp/phyp_driver.c | 15 +++-- src/qemu/qemu_command.c | 23 ++++--- src/qemu/qemu_domain.c | 21 +++++++ src/qemu/qemu_domain.h | 2 + src/qemu/qemu_driver.c | 49 ++++++++++----- src/qemu/qemu_hotplug.c | 8 ++- src/qemu/qemu_process.c | 2 +- src/test/test_driver.c | 8 +-- src/uml/uml_driver.c | 8 +-- src/vbox/vbox_common.c | 4 +- src/vmware/vmware_driver.c | 2 +- src/vmx/vmx.c | 12 ++-- src/xen/xm_internal.c | 14 ++--- src/xenapi/xenapi_driver.c | 2 +- src/xenapi/xenapi_utils.c | 4 +- src/xenconfig/xen_common.c | 8 ++- src/xenconfig/xen_sxpr.c | 9 +-- .../qemuxml2argv-numatune-memnode.args | 2 +- 33 files changed, 243 insertions(+), 111 deletions(-) -- 2.2.2

2 21

[libvirt] [PATCH 0/2] Add some tiny tests for latest commits
by Martin Kletzander 06 Mar '15

06 Mar '15

Two commits (hashes mentioned in commit messages) were added lately without tests and I feel like both deserve one, so here goes. Martin Kletzander (2): tests: Add test for virtio-mmio address type tests: Add test for os interleaving ...=> qemuxml2argv-aarch64-aavmf-virtio-mmio.args} | 4 ++-- ... => qemuxml2argv-aarch64-aavmf-virtio-mmio.xml} | 27 +++++++++++----------- ...l => qemuxml2argv-bios-nvram-os-interleave.xml} | 2 +- tests/qemuxml2argvtest.c | 4 ++++ .../qemuxml2xmlout-bios-nvram-os-interleave.xml} | 0 tests/qemuxml2xmltest.c | 2 ++ 6 files changed, 23 insertions(+), 16 deletions(-) copy tests/qemuxml2argvdata/{qemuxml2argv-aarch64-virt-virtio.args => qemuxml2argv-aarch64-aavmf-virtio-mmio.args} (85%) copy tests/qemuxml2argvdata/{qemuxml2argv-aarch64-virt-virtio.xml => qemuxml2argv-aarch64-aavmf-virtio-mmio.xml} (68%) copy tests/qemuxml2argvdata/{qemuxml2argv-bios-nvram.xml => qemuxml2argv-bios-nvram-os-interleave.xml} (100%) copy tests/{qemuxml2argvdata/qemuxml2argv-bios-nvram.xml => qemuxml2xmloutdata/qemuxml2xmlout-bios-nvram-os-interleave.xml} (100%) -- 2.3.0

2 3