January 2015 - Devel - libvirt List Archives

[libvirt] [libvirt-test-API][PATCH] Add global IPv6 default values to network part
by jiahu 25 Jan '15

25 Jan '15

Added below variables into global.cfg. netip6addr/netip6prefix/netip6start/netip6end --- global.cfg | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/global.cfg b/global.cfg index db8f71e..56677a5 100644 --- a/global.cfg +++ b/global.cfg @@ -195,6 +195,15 @@ defaultnetstart = 192.168.111.2 # default the ending address ip defaultnetend = 192.168.111.254 +# default bridge ipv6 addr +netip6addr = 2001:db8:ca2:99::1 +# default bridge ipv6 prefix +netip6prefix = 64 +# default the starting ipv6 address +netip6start = 2001:db8:ca2:99::11 +# default the ending ipv6 address +netip6end = 2001:db8:ca2:99::ff + ################################################################ # # host interface -- 1.8.1.4

1 0

[libvirt] Missing libxl_device_nic settings
by Kim Larry 25 Jan '15

25 Jan '15

Hi, I was trying to pass ip address to scripts/vif-bridge by putting <ip address=""/> in guest config xml file, however, I found that libxlMakeNic(which located in libxl/libxl_conf.c:956) doesn't set x_nic->ip. So I patched myself but I'm not so sure about VIR_DOMAIN_NET_TYPE_ETHERNET. It seems like vif-route, correct? Here is my patch: diff --git a/src/libxl/libxl_conf.c b/src/libxl/libxl_conf.c index 0555b91..0effc59 100644 --- a/src/libxl/libxl_conf.c +++ b/src/libxl/libxl_conf.c @@ -1047,10 +1047,18 @@ libxlMakeNic(virDomainDefPtr def, if (VIR_STRDUP(x_nic->bridge, virDomainNetGetActualBridgeName(l_nic)) < 0) return -1; - /* fallthrough */ + if (VIR_STRDUP(x_nic->script, l_nic->script) < 0) + return -1; + if (VIR_STRDUP(x_nic->ip, l_nic->data.bridge.ipaddr) < 0) + return -1; + break; case VIR_DOMAIN_NET_TYPE_ETHERNET: if (VIR_STRDUP(x_nic->script, l_nic->script) < 0) return -1; + if (VIR_STRDUP(x_nic->ip, l_nic->data.ethernet.ipaddr) < 0) + return -1; + if (VIR_STRDUP(x_nic->gatewaydev, l_nic->data.ethernet.dev) < 0) + return -1; break; case VIR_DOMAIN_NET_TYPE_NETWORK: { Regards, Jihoon

1 0

[libvirt] Entering freeze for libvirt-1.2.12
by Daniel Veillard 24 Jan '15

24 Jan '15

As planned I tagged the release candidate 1 in git and pushed signed tarballs and rpms to the usual place: ftp://libvirt.org/libvirt/ Seems to work fine for me, but my testing is limited. Give it a try especially on other architectures or OSes. Plan is to release an rc2 by the dn of the week and the final next Tuesday assuming everythings goes smoothly ! thanks, Daniel -- Daniel Veillard | Open Source and Standards, Red Hat veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

2 2

[libvirt] libvirt domXML -> libxl_domain_config conversion testing
by Jim Fehlig 23 Jan '15

23 Jan '15

Hi All, I've been attempting to revive the libvirt domXML -> libxl_domain_config tests originally started by Daniel all the way back in May! https://www.redhat.com/archives/libvir-list/2014-May/msg01102.html In a reply to patch5 of the series, Ian Campbell noted that the doc produced by libxl_domain_config_to_json() may change as new config is added, defaults changed, etc. Some suggestions for coping with this included 1. json template files per libxl version 2. a new API in libvirt's json toolbox to compare json docs (with ability to control the comparison, e.g. ignore certain content) 3. make use of new functionality in Xen 4.5 such as libxl_domain_config_from_json() and libxl_domain_config_compare() Option 1 is simple-minded. Option 2 is an improvement, but a growing list of content must be ignored as additions/changes are made to the libxl_domain_config object. (Example of ignored content in this discussion - https://www.redhat.com/archives/libvir-list/2014-September/msg00627.html) In some cases, we might actually want to test some of the new content instead of ignoring it. Option 3 is promising, but doesn't help with Xen versions 4.2-4.4. Also, 4.5 is missing libxl_domain_config_compare(). After a bit of hacking on a combination of 2 and 3, I'm reconsidering 1 :-). At least for Xen 4.2-4.5. It's a simple solution that doesn't prevent testing new content in the libxl_domain_config object. Going forward, I could work on libxl_domain_config_compare() for xen-unstable/4.6, and then use option 3 to stop the template bloom. Any thoughts on this approach? Smarter options? Regards, Jim

1 0

[libvirt] [PATCH] aarch64: Support versioned machine types.
by Richard W.M. Jones 23 Jan '15

23 Jan '15

From: "Richard W.M. Jones" <rjones(a)redhat.com> For distros that want to add versioned machine types, they will add (downstream) machine types like "virt-foo-1.2.3". Detect these as MMIO too. Signed-off-by: Richard W.M. Jones <rjones(a)redhat.com> --- src/qemu/qemu_command.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 434ac7c..3c75de5 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -1158,7 +1158,8 @@ qemuDomainAssignARMVirtioMMIOAddresses(virDomainDefPtr def, if (((def->os.arch == VIR_ARCH_ARMV7L) || (def->os.arch == VIR_ARCH_AARCH64)) && (STRPREFIX(def->os.machine, "vexpress-") || - STREQ(def->os.machine, "virt")) && + STREQ(def->os.machine, "virt") || + STRPREFIX(def->os.machine, "virt-")) && virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_VIRTIO_MMIO)) { qemuDomainPrimeVirtioDeviceAddresses( def, VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_MMIO); -- 1.8.3.1

2 1

[libvirt] [PATCH] Use correct location for qcow1 encryption header
by Ján Tomko 23 Jan '15

23 Jan '15

After the 8-byte size header, there are two one-byte headers and two bytes of padding before the crypt_header field. Our QCOW1_HDR_CRYPT constant did not skip the padding. http://git.qemu.org/?p=qemu.git;a=blob;f=block/qcow.c;h=ece22697#l41 https://bugzilla.redhat.com/show_bug.cgi?id=1185165 --- src/util/virstoragefile.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/util/virstoragefile.c b/src/util/virstoragefile.c index 7a4f9a0..8568ebb 100644 --- a/src/util/virstoragefile.c +++ b/src/util/virstoragefile.c @@ -161,7 +161,7 @@ qedGetBackingStore(char **, int *, const char *, size_t); #define QCOWX_HDR_BACKING_FILE_SIZE (QCOWX_HDR_BACKING_FILE_OFFSET+8) #define QCOWX_HDR_IMAGE_SIZE (QCOWX_HDR_BACKING_FILE_SIZE+4+4) -#define QCOW1_HDR_CRYPT (QCOWX_HDR_IMAGE_SIZE+8+1+1) +#define QCOW1_HDR_CRYPT (QCOWX_HDR_IMAGE_SIZE+8+1+1+2) #define QCOW2_HDR_CRYPT (QCOWX_HDR_IMAGE_SIZE+8) #define QCOW1_HDR_TOTAL_SIZE (QCOW1_HDR_CRYPT+4+8) -- 2.0.4

2 1

[libvirt] [PATCH v2 0/4] qemu: fix PCI bridge auto-add to extend default bus
by Erik Skultety 23 Jan '15

23 Jan '15

Erik Skultety (4): qemu: reorder PCI slot assignment functions qemu: move PCI slot assignment for PIIX3, Q35 into a separate function qemu: Fix auto-adding PCI bridge when all slots are reserved qemu: Add check for PCI bridge placement if there are too many PCI devices src/qemu/qemu_command.c | 265 ++++++++++++++++++++++++++++-------------------- 1 file changed, 154 insertions(+), 111 deletions(-) -- 1.9.3

2 10

[libvirt] [PATCH 0/5] Const correctnes/random fixes
by Peter Krempa 23 Jan '15

23 Jan '15

Few fixes/tweaks that have accumulated in my memory hotplug branch. They should be trivial enough and semantically inert. Peter Krempa (5): conf: Fix comment mentioning actual type of @multi member of virDevicePCIAddress qemu: command: Honor const-correctnes in qemuBuildNumaArgStr util: json: Make argument of virJSONValueArraySize const schemas: Move definition of 'hexuint' to basictypes util: bitmap: Tolerate NULL bitmaps in virBitmapEqual docs/schemas/basictypes.rng | 6 ++++++ docs/schemas/nodedev.rng | 6 ------ src/conf/device_conf.h | 2 +- src/qemu/qemu_command.c | 2 +- src/util/virbitmap.c | 6 ++++++ src/util/virbitmap.h | 3 +-- src/util/virjson.c | 2 +- src/util/virjson.h | 2 +- 8 files changed, 17 insertions(+), 12 deletions(-) -- 2.2.1

2 8

[libvirt] [PATCH 0/5] Revert and fix PCI bridge auto-add to extend default bus
by Erik Skultety 23 Jan '15

23 Jan '15

Erik Skultety (5): qemu: Remove dead code in qemuDomainAssignPCIAddresses revert patch conf: virDomainDefMaybeAddController tweak return code qemu: Fix auto-adding PCI bridge when all slots are reserved qemu: move PCI slot assignment for PIIX3, Q35 into a separate function qemu: reorder PCI slot assignment functions src/conf/domain_conf.c | 2 +- src/qemu/qemu_command.c | 264 ++++++++++++++++++++++++++++-------------------- 2 files changed, 154 insertions(+), 112 deletions(-) -- 1.9.3

2 11

[libvirt] [PATCH 0/3] Update example apparmor profile
by Mike Latimer 23 Jan '15

23 Jan '15

The apparmor profile example for libvirtd is rather outdated. The changes in this patch series are intended to bring this sample up to date with the latest working configuration. This series addresses issues applicable to general libvirt, Xen and libvirt-TCK operations - each in their own patch. Mike Latimer (3): Fix apparmor issues for Xen Grant access to helpers Fix apparmor issues for tck examples/apparmor/usr.sbin.libvirtd | 6 ++++++ 1 file changed, 6 insertions(+) -- 1.8.4.5

2 10