[libvirt] [PATCH 0/2] Improve whitespace syntax checks
by Thorsten Behrens
Check for whitespace around assignments / compount assignment
operators. Fix syntax-check fallout in PATCH 2/2.
Thorsten Behrens (2):
Make syntax check notice assignments w/o surrounding spaces.
maint: align whitespace with project conventions.
build-aux/bracket-spacing.pl | 8 +++++
examples/object-events/event-test.c | 20 +++++------
src/conf/nwfilter_conf.c | 72 ++++++++++++++++++-------------------
src/esx/esx_vi.c | 2 +-
src/libvirt.c | 2 +-
src/nwfilter/nwfilter_learnipaddr.c | 2 +-
src/openvz/openvz_conf.c | 2 +-
src/openvz/openvz_driver.c | 2 +-
src/phyp/phyp_driver.c | 2 +-
src/util/virlog.c | 4 +--
src/util/virsysinfo.c | 2 +-
src/xen/xen_driver.c | 4 +--
src/xen/xs_internal.c | 10 +++---
src/xenapi/xenapi_driver.c | 22 ++++++------
tests/commandtest.c | 4 +--
tests/qemumonitorjsontest.c | 2 +-
tools/virsh-domain.c | 6 ++--
tools/virsh-host.c | 2 +-
tools/virt-login-shell.c | 2 +-
19 files changed, 89 insertions(+), 81 deletions(-)
--
1.8.4
10 years, 11 months
[libvirt] [PATCH 0/9] Fix corner cases in nodedev detach and reattach
by Jiri Denemark
https://bugzilla.redhat.com/show_bug.cgi?id=1046919
The first two patches fix bugs in PCI device handling code, the third
patch provides a nice error message when nodedev detach is not supported
and the rest are tests for testing the bugs fixed in the first two
patches.
Jincheng Miao (1):
qemu: Don't detach devices if passthrough doesn't work
Jiri Denemark (8):
pci: Make reattach work for unbound devices
pci: Fix failure paths in detach
virpcitest: Show PCI device tested by each test
pci: Publish some internal code for virpcitest
virpcimock: Mock /sys/bus/pci/drivers_probe
virpcitest: More tests for device detach and reattach
virpcimock: Add PCI driver which always fails
virpcitest: Test virPCIDeviceDetach failure
src/libvirt_private.syms | 2 +
src/qemu/qemu_driver.c | 32 +++++---
src/util/virpci.c | 121 +++++++++++++++++-----------
src/util/virpci.h | 5 ++
tests/virpcimock.c | 76 ++++++++++++------
tests/virpcitest.c | 199 ++++++++++++++++++++++++++++++++++++++++++++++-
6 files changed, 355 insertions(+), 80 deletions(-)
--
1.8.5.3
10 years, 11 months
[libvirt] [PATCH 0/6] Add BlkIO and CPU/mem stat API implementations for lxc
by Thorsten Behrens
This patch set adds block io, memory and domain cpu statistics API
slot implementations to the LXC driver, in order to get linux
container monitoring and accounting a bit closer to qemu standards.
The last patch is a tad quirky (happy to hear suggestions on
alternative ways), in that it widens the permissible value set
at the .domainBlockStats slot: for lxc guests, it is relatively
likely to have zero disk devices, since host filesystems can be
used via passthrough bind mounts. Therefore, passing the null ptr
or the zero-length string as device path, is interpreted as 'return
summary stats for the entire domains's block io'.
Thorsten Behrens (6):
Add util virCgroupGetBlkioIo*Serviced methods.
Implement domainMemoryStats API slot for LXC driver.
Make qemuGetDomainTotalCPUStats a virCgroup function.
Implement domainGetCPUStats for lxc driver.
Implemet lxcDomainBlockStats for lxc driver
Widening API change - accept empty path for virDomainBlockStats
src/libvirt.c | 1 -
src/libvirt_private.syms | 3 +
src/lxc/lxc_driver.c | 245 ++++++++++++++++++++++++++++++++++++++++++
src/qemu/qemu_driver.c | 56 +---------
src/remote/remote_driver.c | 2 +
src/test/test_driver.c | 2 +
src/util/vircgroup.c | 261 +++++++++++++++++++++++++++++++++++++++++++++
src/util/vircgroup.h | 17 +++
src/xen/xen_driver.c | 2 +
9 files changed, 536 insertions(+), 53 deletions(-)
--
1.8.4
10 years, 11 months
[libvirt] Help out
by Giorgio Zoppi
Hi all,
how could I help out? Is there a bug list or a todo list? Are u able to pin
a virtualization sandbox to a given processor?
Best Regards,
Giorgio
10 years, 11 months
[libvirt] [libvirt-glib] Fix GVirConfigDomainTimerPit parent class/object
by Christophe Fergeau
GVirConfigDomainTimerPit is correctly define as inheriting from
GVirConfigDomainTimer in the G_DEFINE_TYPE macro, but it only
embeds GVirConfigObject/GVirConfigObjectClass structs.
This is an ABI break as this changes the size of the
GVirConfigDomainTimerPit/GVirConfigDomainTimerPitClass structs
However, since these structs only have non-public members, users of the
library will not be trying to access fields of the struct past the first
field (which is the one which changed size). This would also be an issue
if anything had subclassed GVirConfigDomainTimerPit, which is unlikely at
this point.
All in all, it's imo more convenient to silently fix this without an soname
bump. I've tested that GNOME Boxes built with an older version of
libvirt-gconfig still generates the correct GVirConfigDomainTimerPit
elements when using a version of libvirt-gconfig with this patch.
---
libvirt-gconfig/libvirt-gconfig-domain-timer-pit.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/libvirt-gconfig/libvirt-gconfig-domain-timer-pit.h b/libvirt-gconfig/libvirt-gconfig-domain-timer-pit.h
index b644c52..7802ac4 100644
--- a/libvirt-gconfig/libvirt-gconfig-domain-timer-pit.h
+++ b/libvirt-gconfig/libvirt-gconfig-domain-timer-pit.h
@@ -42,7 +42,7 @@ typedef struct _GVirConfigDomainTimerPitClass GVirConfigDomainTimerPitClass;
struct _GVirConfigDomainTimerPit
{
- GVirConfigObject parent;
+ GVirConfigDomainTimer parent;
GVirConfigDomainTimerPitPrivate *priv;
@@ -51,7 +51,7 @@ struct _GVirConfigDomainTimerPit
struct _GVirConfigDomainTimerPitClass
{
- GVirConfigObjectClass parent_class;
+ GVirConfigDomainTimerClass parent_class;
gpointer padding[20];
};
--
1.8.4.2
10 years, 11 months
[libvirt] [PATCH] doc: Add missing space in <clock> documentation
by Christophe Fergeau
---
Pushed under the trivial rule.
docs/formatdomain.html.in | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index 68860ef..80d9495 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -1348,7 +1348,7 @@
</dl>
<p>
A <code>clock</code> may have zero or more
- <code>timer</code>sub-elements. <span class="since">Since
+ <code>timer</code> sub-elements. <span class="since">Since
0.8.0</span>
</p>
</dd>
--
1.8.4.2
10 years, 11 months
[libvirt] [PATCH] build: add $(prefix) to SYSTEMD_UNIT_DIR
by Laine Stump
I noticed this problem when adding systemd support to netcf, because I
setup the configure.ac to automatically prefer using systemd over
initscripts when possible - although I had copied the
install-data-local target from the example of libvirt's
"libvirt-guests" service more or less verbatim, "make distcheck" would
fail because it was trying to install the service file directly into
/lib/systemd/system rather than into
/home/user/some/unimportant/name/lib/systemd/system.
This is caused by the install/uninstall rules for the systemd unit
files relying on $(DESTDIR) pointing the installed files to the right
place, but in reality $(DESTDIR) is empty during this part of make
distcheck - it instead sets $(prefix) with the toplevel directory used
for its test build/install/uninstall cycle.
(This problem hasn't been seen when running "make distcheck" in
libvirt because libvirt will never build/install systemd support
unless explicitly told to do so on the configure commandline, and
"make distcheck" doesn't put the "--with-initscript=..." option on the
configure commandline.)
I verified that the same problem does exist in libvirt by modifying
libvirt's configure.ac to set:
init_systemd=yes
with_init_script=systemd+redhat
This forces a build/install of the systemd unit files during
distcheck, which yields an error like this:
/usr/bin/install -c -m 644 virtlockd.service \
/lib/systemd/system/
libtool: install: warning: relinking `libvirt-qemu.la'
/usr/bin/install: cannot remove '/lib/systemd/system/virtlockd.service': Permission denied
make[4]: *** [install-systemd] Error 1
After adding $(prefix) to all the definitions of SYSTEMD_UNIT_DIR,
make distcheck now completes successfully with the modified
configure.ac, and the above lines change to something like this:
/usr/bin/install -c -m 644 virtlockd.service \
/home/laine/devel/libvirt/libvirt-1.2.1/_inst/lib/systemd/system/
---
daemon/Makefile.am | 4 ++--
src/Makefile.am | 4 ++--
tools/Makefile.am | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/daemon/Makefile.am b/daemon/Makefile.am
index e5c5db8..00221ab 100644
--- a/daemon/Makefile.am
+++ b/daemon/Makefile.am
@@ -1,6 +1,6 @@
## Process this file with automake to produce Makefile.in
-## Copyright (C) 2005-2013 Red Hat, Inc.
+## Copyright (C) 2005-2014 Red Hat, Inc.
##
## This library is free software; you can redistribute it and/or
## modify it under the terms of the GNU Lesser General Public
@@ -387,7 +387,7 @@ endif ! LIBVIRT_INIT_SCRIPT_UPSTART
if LIBVIRT_INIT_SCRIPT_SYSTEMD
-SYSTEMD_UNIT_DIR = /lib/systemd/system
+SYSTEMD_UNIT_DIR = $(prefix)/lib/systemd/system
BUILT_SOURCES += libvirtd.service
install-init-systemd: install-sysconfig libvirtd.service
diff --git a/src/Makefile.am b/src/Makefile.am
index 57e163f..8f77658 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -1,6 +1,6 @@
## Process this file with automake to produce Makefile.in
-## Copyright (C) 2005-2013 Red Hat, Inc.
+## Copyright (C) 2005-2014 Red Hat, Inc.
##
## This library is free software; you can redistribute it and/or
## modify it under the terms of the GNU Lesser General Public
@@ -2220,7 +2220,7 @@ EXTRA_DIST += \
if WITH_LIBVIRTD
if LIBVIRT_INIT_SCRIPT_SYSTEMD
-SYSTEMD_UNIT_DIR = /lib/systemd/system
+SYSTEMD_UNIT_DIR = $(prefix)/lib/systemd/system
BUILT_SOURCES += virtlockd.service virtlockd.socket
DISTCLEANFILES += virtlockd.service virtlockd.socket
diff --git a/tools/Makefile.am b/tools/Makefile.am
index 256a8f3..6847f13 100644
--- a/tools/Makefile.am
+++ b/tools/Makefile.am
@@ -1,4 +1,4 @@
-## Copyright (C) 2005-2013 Red Hat, Inc.
+## Copyright (C) 2005-2014 Red Hat, Inc.
##
## This library is free software; you can redistribute it and/or
## modify it under the terms of the GNU Lesser General Public
@@ -306,7 +306,7 @@ libvirt-guests.init: libvirt-guests.init.in libvirt-guests.sh
EXTRA_DIST += libvirt-guests.service.in
-SYSTEMD_UNIT_DIR = /lib/systemd/system
+SYSTEMD_UNIT_DIR = $(prefix)/lib/systemd/system
if LIBVIRT_INIT_SCRIPT_SYSTEMD
install-systemd: libvirt-guests.service install-sysconfig libvirt-guests.sh
--
1.8.4.2
10 years, 11 months
[libvirt] [libvirt-security-notice PATCH] templates: Include charset info in <head/>
by Michal Privoznik
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
templates/lsn2html.xsl | 3 ++-
templates/lsn2indexhtml.xsl | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/templates/lsn2html.xsl b/templates/lsn2html.xsl
index aaac6e8..46501ab 100644
--- a/templates/lsn2html.xsl
+++ b/templates/lsn2html.xsl
@@ -21,7 +21,8 @@
<html>
<head>
<title>Libvirt Security Notice: LSN-<xsl:value-of select="lsn:id"/></title>
- <link rel="stylesheet" type="text/css" href="../main.css" />
+ <link rel="stylesheet" type="text/css" href="../main.css" />
+ <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
</head>
<body>
<h1>Libvirt Security Notice: LSN-<xsl:value-of select="lsn:id"/></h1>
diff --git a/templates/lsn2indexhtml.xsl b/templates/lsn2indexhtml.xsl
index 3573ac3..2e6f9c2 100644
--- a/templates/lsn2indexhtml.xsl
+++ b/templates/lsn2indexhtml.xsl
@@ -12,7 +12,8 @@
<html>
<head>
<title>Libvirt Security Notice Index</title>
- <link rel="stylesheet" type="text/css" href="main.css" />
+ <link rel="stylesheet" type="text/css" href="main.css" />
+ <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
</head>
<body>
<h1>Libvirt Security Notice Index</h1>
--
1.8.5.2
10 years, 11 months
