November 2013 - Devel - libvirt List Archives

[libvirt] [PATCH v2] virsh domxml-from-native to treat SCSI as the bus type for pseries by default
by Shivaprasad G Bhat 15 Nov '13

15 Nov '13

The bus type IDE being enum Zero, the bus type on pseries system appears as IDE for all the disk types. Pseries platform needs this to appear as SCSI instead of IDE. Signed-off-by: Shivaprasad G Bhat <sbhat(a)linux.vnet.ibm.com> --- src/qemu/qemu_domain.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index b8aec2d..df06c13 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -827,6 +827,12 @@ qemuDomainDeviceDefPostParse(virDomainDeviceDefPtr dev, if (dev->type == VIR_DOMAIN_DEVICE_DISK) { virDomainDiskDefPtr disk = dev->data.disk; + if ((def->os.arch == VIR_ARCH_PPC64) && + def->os.machine && STREQ(def->os.machine, "pseries") && + (disk->bus == VIR_DOMAIN_DISK_BUS_IDE)) { + disk->bus = VIR_DOMAIN_DISK_BUS_SCSI; + } + /* both of these require data from the driver config */ if (driver && (cfg = virQEMUDriverGetConfig(driver))) { /* assign default storage format and driver according to config */ @@ -868,6 +874,11 @@ qemuDomainDeviceDefPostParse(virDomainDeviceDefPtr dev, (def->os.arch == VIR_ARCH_S390 || def->os.arch == VIR_ARCH_S390X)) dev->data.chr->targetType = VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_VIRTIO; + if (dev->type == VIR_DOMAIN_DEVICE_CONTROLLER && + dev->data.controller->type == VIR_DOMAIN_CONTROLLER_TYPE_IDE && + def->os.machine && STREQ(def->os.machine, "pseries")) + dev->data.controller->type = VIR_DOMAIN_CONTROLLER_TYPE_SCSI; + /* set the default USB model to none for s390 unless an address is found */ if (dev->type == VIR_DOMAIN_DEVICE_CONTROLLER && dev->data.controller->type == VIR_DOMAIN_CONTROLLER_TYPE_USB &&

5 12

[libvirt] [PATCH not-for-inclusion] accomodate new qemu migration status 'setup'
by Serge Hallyn 15 Nov '13

15 Nov '13

Hi, newer qemu introduces a new migration state 'setup', which libvirt does not yet know about. This upsets our qa-regression-tests :) I know Eric is working on a fix but is short on time, so I thought I would send the patch that is working for me. I don't expect it to be a proper fix, as I suspect the proper fix should actually add a new migration state in libvirt itself. But it appears to be working. This patch treats the new setup state as as active, but doesn't try to query for status info yet. Signed-off-by: Serge Hallyn <serge.hallyn(a)ubuntu.com> --- src/qemu/qemu_migration.c | 48 ++++++++++++++++++++++++++++---------------- src/qemu/qemu_monitor.c | 8 +++++--- src/qemu/qemu_monitor.h | 3 ++- src/qemu/qemu_monitor_json.c | 8 +++++++- src/qemu/qemu_monitor_text.c | 9 ++++++++- 5 files changed, 53 insertions(+), 23 deletions(-) Index: libvirt-1.1.4/src/qemu/qemu_migration.c =================================================================== --- libvirt-1.1.4.orig/src/qemu/qemu_migration.c 2013-11-13 20:47:05.100085000 +0100 +++ libvirt-1.1.4/src/qemu/qemu_migration.c 2013-11-13 20:47:05.092085000 +0100 @@ -1614,7 +1614,7 @@ enum qemuDomainAsyncJob asyncJob) { qemuDomainObjPrivatePtr priv = vm->privateData; - int ret; + int ret, setting_up; qemuMonitorMigrationStatus status; memset(&status, 0, sizeof(status)); @@ -1624,7 +1624,7 @@ /* Guest already exited; nothing further to update. */ return -1; } - ret = qemuMonitorGetMigrationStatus(priv->mon, &status); + ret = qemuMonitorGetMigrationStatus(priv->mon, &status, &setting_up); qemuDomainObjExitMonitor(driver, vm); @@ -1645,21 +1645,35 @@ break; case QEMU_MONITOR_MIGRATION_STATUS_ACTIVE: - priv->job.info.fileTotal = priv->job.status.disk_total; - priv->job.info.fileRemaining = priv->job.status.disk_remaining; - priv->job.info.fileProcessed = priv->job.status.disk_transferred; - - priv->job.info.memTotal = priv->job.status.ram_total; - priv->job.info.memRemaining = priv->job.status.ram_remaining; - priv->job.info.memProcessed = priv->job.status.ram_transferred; - - priv->job.info.dataTotal = - priv->job.status.ram_total + priv->job.status.disk_total; - priv->job.info.dataRemaining = - priv->job.status.ram_remaining + priv->job.status.disk_remaining; - priv->job.info.dataProcessed = - priv->job.status.ram_transferred + - priv->job.status.disk_transferred; + if (setting_up) { + priv->job.info.fileTotal = -1; + priv->job.info.fileRemaining = -1; + priv->job.info.fileProcessed = 0; + + priv->job.info.memTotal = -1; + priv->job.info.memRemaining = -1; + priv->job.info.memProcessed = 0; + + priv->job.info.dataTotal = -1; + priv->job.info.dataRemaining = -1; + priv->job.info.dataProcessed = 0; + } else { + priv->job.info.fileTotal = priv->job.status.disk_total; + priv->job.info.fileRemaining = priv->job.status.disk_remaining; + priv->job.info.fileProcessed = priv->job.status.disk_transferred; + + priv->job.info.memTotal = priv->job.status.ram_total; + priv->job.info.memRemaining = priv->job.status.ram_remaining; + priv->job.info.memProcessed = priv->job.status.ram_transferred; + + priv->job.info.dataTotal = + priv->job.status.ram_total + priv->job.status.disk_total; + priv->job.info.dataRemaining = + priv->job.status.ram_remaining + priv->job.status.disk_remaining; + priv->job.info.dataProcessed = + priv->job.status.ram_transferred + + priv->job.status.disk_transferred; + } ret = 0; break; Index: libvirt-1.1.4/src/qemu/qemu_monitor.c =================================================================== --- libvirt-1.1.4.orig/src/qemu/qemu_monitor.c 2013-11-13 20:47:05.100085000 +0100 +++ libvirt-1.1.4/src/qemu/qemu_monitor.c 2013-11-13 20:57:06.932085000 +0100 @@ -2087,7 +2087,8 @@ int qemuMonitorGetMigrationStatus(qemuMonitorPtr mon, - qemuMonitorMigrationStatusPtr status) + qemuMonitorMigrationStatusPtr status, + int *setting_up) { int ret; VIR_DEBUG("mon=%p", mon); @@ -2098,10 +2099,11 @@ return -1; } + *setting_up = 0; if (mon->json) - ret = qemuMonitorJSONGetMigrationStatus(mon, status); + ret = qemuMonitorJSONGetMigrationStatus(mon, status, setting_up); else - ret = qemuMonitorTextGetMigrationStatus(mon, status); + ret = qemuMonitorTextGetMigrationStatus(mon, status, setting_up); return ret; } Index: libvirt-1.1.4/src/qemu/qemu_monitor.h =================================================================== --- libvirt-1.1.4.orig/src/qemu/qemu_monitor.h 2013-11-13 20:47:05.100085000 +0100 +++ libvirt-1.1.4/src/qemu/qemu_monitor.h 2013-11-13 20:47:05.096085000 +0100 @@ -432,7 +432,8 @@ }; int qemuMonitorGetMigrationStatus(qemuMonitorPtr mon, - qemuMonitorMigrationStatusPtr status); + qemuMonitorMigrationStatusPtr status, + int *setting_up); int qemuMonitorGetSpiceMigrationStatus(qemuMonitorPtr mon, bool *spice_migrated); Index: libvirt-1.1.4/src/qemu/qemu_monitor_json.c =================================================================== --- libvirt-1.1.4.orig/src/qemu/qemu_monitor_json.c 2013-11-13 20:47:05.100085000 +0100 +++ libvirt-1.1.4/src/qemu/qemu_monitor_json.c 2013-11-13 21:02:16.492085000 +0100 @@ -2351,7 +2351,8 @@ static int qemuMonitorJSONGetMigrationStatusReply(virJSONValuePtr reply, - qemuMonitorMigrationStatusPtr status) + qemuMonitorMigrationStatusPtr status, + int *setting_up) { virJSONValuePtr ret; const char *statusstr; @@ -2369,6 +2370,11 @@ return -1; } + if (strncmp(statusstr, "setup", 5) == 0) { + status->status = QEMU_MONITOR_MIGRATION_STATUS_ACTIVE; + *setting_up = 1; + return 0; + } status->status = qemuMonitorMigrationStatusTypeFromString(statusstr); if (status->status < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, @@ -2509,7 +2515,8 @@ int qemuMonitorJSONGetMigrationStatus(qemuMonitorPtr mon, - qemuMonitorMigrationStatusPtr status) + qemuMonitorMigrationStatusPtr status, + int *setting_up) { int ret; virJSONValuePtr cmd = qemuMonitorJSONMakeCommand("query-migrate", @@ -2527,7 +2534,7 @@ ret = qemuMonitorJSONCheckError(cmd, reply); if (ret == 0 && - qemuMonitorJSONGetMigrationStatusReply(reply, status) < 0) + qemuMonitorJSONGetMigrationStatusReply(reply, status, &setting_up) < 0) ret = -1; if (ret < 0) Index: libvirt-1.1.4/src/qemu/qemu_monitor_text.c =================================================================== --- libvirt-1.1.4.orig/src/qemu/qemu_monitor_text.c 2013-11-13 20:47:05.100085000 +0100 +++ libvirt-1.1.4/src/qemu/qemu_monitor_text.c 2013-11-13 20:47:05.096085000 +0100 @@ -1419,7 +1419,8 @@ #define MIGRATION_DISK_TOTAL_PREFIX "total disk: " int qemuMonitorTextGetMigrationStatus(qemuMonitorPtr mon, - qemuMonitorMigrationStatusPtr status) + qemuMonitorMigrationStatusPtr status, + int *setting_up) { char *reply; char *tmp; @@ -1441,6 +1442,12 @@ } *end = '\0'; + if (strncmp(tmp, "setup", 5) == 0) { + status->status = QEMU_MONITOR_MIGRATION_STATUS_ACTIVE; + *setting_up = 1; + goto done; + } + status->status = qemuMonitorMigrationStatusTypeFromString(tmp); if (status->status < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, Index: libvirt-1.1.4/tests/qemumonitorjsontest.c =================================================================== --- libvirt-1.1.4.orig/tests/qemumonitorjsontest.c 2013-10-18 23:15:06.000000000 +0200 +++ libvirt-1.1.4/tests/qemumonitorjsontest.c 2013-11-13 20:58:46.348085000 +0100 @@ -1660,7 +1660,7 @@ { virDomainXMLOptionPtr xmlopt = (virDomainXMLOptionPtr)data; qemuMonitorTestPtr test = qemuMonitorTestNewSimple(true, xmlopt); - int ret = -1; + int ret = -1, setting_up; qemuMonitorMigrationStatus status, expectedStatus; if (!test) @@ -1689,7 +1689,7 @@ "}") < 0) goto cleanup; - if (qemuMonitorJSONGetMigrationStatus(qemuMonitorTestGetMonitor(test), &status) < 0) + if (qemuMonitorJSONGetMigrationStatus(qemuMonitorTestGetMonitor(test), &status, &setting_up) < 0) goto cleanup; if (memcmp(&status, &expectedStatus, sizeof(status)) != 0) { Index: libvirt-1.1.4/src/qemu/qemu_monitor_json.h =================================================================== --- libvirt-1.1.4.orig/src/qemu/qemu_monitor_json.h 2013-11-13 21:00:07.052085000 +0100 +++ libvirt-1.1.4/src/qemu/qemu_monitor_json.h 2013-11-13 21:00:42.028085000 +0100 @@ -130,7 +130,8 @@ unsigned long long cacheSize); int qemuMonitorJSONGetMigrationStatus(qemuMonitorPtr mon, - qemuMonitorMigrationStatusPtr status); + qemuMonitorMigrationStatusPtr status, + int *setting_up); int qemuMonitorJSONGetMigrationCapability(qemuMonitorPtr mon, qemuMonitorMigrationCaps capability); Index: libvirt-1.1.4/src/qemu/qemu_monitor_text.h =================================================================== --- libvirt-1.1.4.orig/src/qemu/qemu_monitor_text.h 2013-11-13 21:00:15.432085000 +0100 +++ libvirt-1.1.4/src/qemu/qemu_monitor_text.h 2013-11-13 21:01:00.124085000 +0100 @@ -117,7 +117,8 @@ unsigned long long downtime); int qemuMonitorTextGetMigrationStatus(qemuMonitorPtr mon, - qemuMonitorMigrationStatusPtr status); + qemuMonitorMigrationStatusPtr status, + int *setting_up); int qemuMonitorTextMigrate(qemuMonitorPtr mon, unsigned int flags,

3 2

[libvirt] [PATCH]docs: fix a typo in formatnwfilter.html.in
by Chen Hanxiao 15 Nov '13

15 Nov '13

From: Chen Hanxiao <chenhanxiao(a)cn.fujitsu.com> s/insallations/installations/ Signed-off-by: Chen Hanxiao <chenhanxiao(a)cn.fujitsu.com> --- docs/formatnwfilter.html.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/formatnwfilter.html.in b/docs/formatnwfilter.html.in index c5ab68d..4b95fce 100644 --- a/docs/formatnwfilter.html.in +++ b/docs/formatnwfilter.html.in @@ -2355,7 +2355,7 @@ on the source system are equivalent to those on the target system and vice versa. <br/><br/> - Migration must occur between libvirt insallations of version + Migration must occur between libvirt installations of version 0.8.1 or later in order not to lose the network traffic filters associated with an interface. </p> -- 1.8.2.1

2 1

[libvirt] [PATCH] docs: improve job info details
by Eric Blake 15 Nov '13

15 Nov '13

Noticed while revieweing the patches for qemu's new migration state. * include/libvirt/libvirt.h.in (_virDomainJobInfo): Fix typo, grammar. * src/libvirt.c (virDomainGetJobInfo): Add cross reference. Signed-off-by: Eric Blake <eblake(a)redhat.com> --- Pushing under the trivial rule. include/libvirt/libvirt.h.in | 8 ++++---- src/libvirt.c | 3 +++ 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in index 80b2d78..d656634 100644 --- a/include/libvirt/libvirt.h.in +++ b/include/libvirt/libvirt.h.in @@ -4067,20 +4067,20 @@ struct _virDomainJobInfo { /* One of virDomainJobType */ int type; - /* Time is measured in mill-seconds */ + /* Time is measured in milliseconds */ unsigned long long timeElapsed; /* Always set */ unsigned long long timeRemaining; /* Only for VIR_DOMAIN_JOB_BOUNDED */ /* Data is measured in bytes unless otherwise specified - * and is measuring the job as a whole + * and is measuring the job as a whole. * * For VIR_DOMAIN_JOB_UNBOUNDED, dataTotal may be less * than the final sum of dataProcessed + dataRemaining * in the event that the hypervisor has to repeat some - * data eg due to dirtied pages during migration + * data, such as due to dirtied pages during migration. * * For VIR_DOMAIN_JOB_BOUNDED, dataTotal shall always - * equal sum of dataProcessed + dataRemaining + * equal the sum of dataProcessed + dataRemaining. */ unsigned long long dataTotal; unsigned long long dataProcessed; diff --git a/src/libvirt.c b/src/libvirt.c index 90608ab..6a17db8 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -18666,6 +18666,9 @@ error: * Extract information about progress of a background job on a domain. * Will return an error if the domain is not active. * + * This function returns a limited amount of information in comparison + * to virDomainGetJobStats(). + * * Returns 0 in case of success and -1 in case of failure. */ int -- 1.8.3.1

1 0

[libvirt] [PATCH] qemu: Call qemuSetupHostdevCGroup later during hotplug
by Jiri Denemark 15 Nov '13

15 Nov '13

https://bugzilla.redhat.com/show_bug.cgi?id=1025108 So far qemuSetupHostdevCGroup was called very early during hotplug, even before we knew the device we were about to hotplug was actually available. By calling the function later, we make sure QEMU won't be allowed to access devices used by other domains. Another important effect of this change is that hopluging USB devices specified by vendor and product (but not by their USB address) works again. This was broken since v1.0.5-171-g7d763ac, when the call to qemuFindHostdevUSBDevice was moved after the call to qemuSetupHostdevCGroup, which then used an uninitialized USB address. Signed-off-by: Jiri Denemark <jdenemar(a)redhat.com> --- src/qemu/qemu_hotplug.c | 36 +++++++++++++++++++++++++++--------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index 6eb483c..0d9a3aa 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -1135,6 +1135,7 @@ int qemuDomainAttachHostPciDevice(virQEMUDriverPtr driver, int configfd = -1; char *configfd_name = NULL; bool releaseaddr = false; + bool teardowncgroup = false; int backend = hostdev->source.subsys.u.pci.backend; if (VIR_REALLOC_N(vm->def->hostdevs, vm->def->nhostdevs + 1) < 0) @@ -1171,6 +1172,10 @@ int qemuDomainAttachHostPciDevice(virQEMUDriverPtr driver, break; } + if (qemuSetupHostdevCGroup(vm, hostdev) < 0) + goto error; + teardowncgroup = true; + if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) { if (qemuAssignDeviceHostdevAlias(vm->def, hostdev, -1) < 0) goto error; @@ -1226,6 +1231,9 @@ int qemuDomainAttachHostPciDevice(virQEMUDriverPtr driver, return 0; error: + if (teardowncgroup && qemuTeardownHostdevCgroup(vm, hostdev) < 0) + VIR_WARN("Unable to remove host device cgroup ACL on hotplug fail"); + if (releaseaddr) qemuDomainReleaseDeviceAddress(vm, hostdev->info, NULL); @@ -1418,6 +1426,7 @@ int qemuDomainAttachHostUsbDevice(virQEMUDriverPtr driver, virUSBDevicePtr usb = NULL; char *devstr = NULL; bool added = false; + bool teardowncgroup = false; int ret = -1; if (qemuFindHostdevUSBDevice(hostdev, true, &usb) < 0) @@ -1435,6 +1444,10 @@ int qemuDomainAttachHostUsbDevice(virQEMUDriverPtr driver, added = true; virUSBDeviceListSteal(list, usb); + if (qemuSetupHostdevCGroup(vm, hostdev) < 0) + goto cleanup; + teardowncgroup = true; + if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) { if (qemuAssignDeviceHostdevAlias(vm->def, hostdev, -1) < 0) goto cleanup; @@ -1461,6 +1474,10 @@ int qemuDomainAttachHostUsbDevice(virQEMUDriverPtr driver, ret = 0; cleanup: + if (ret < 0 && + teardowncgroup && + qemuTeardownHostdevCgroup(vm, hostdev) < 0) + VIR_WARN("Unable to remove host device cgroup ACL on hotplug fail"); if (added) virUSBDeviceListSteal(driver->activeUsbHostdevs, usb); virUSBDeviceFree(usb); @@ -1478,6 +1495,7 @@ qemuDomainAttachHostScsiDevice(virQEMUDriverPtr driver, qemuDomainObjPrivatePtr priv = vm->privateData; char *devstr = NULL; char *drvstr = NULL; + bool teardowncgroup = false; if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DRIVE) || !virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE) || @@ -1498,6 +1516,10 @@ qemuDomainAttachHostScsiDevice(virQEMUDriverPtr driver, return -1; } + if (qemuSetupHostdevCGroup(vm, hostdev) < 0) + goto cleanup; + teardowncgroup = true; + if (qemuAssignDeviceHostdevAlias(vm->def, hostdev, -1) < 0) goto cleanup; @@ -1535,8 +1557,11 @@ qemuDomainAttachHostScsiDevice(virQEMUDriverPtr driver, ret = 0; cleanup: - if (ret < 0) + if (ret < 0) { qemuDomainReAttachHostScsiDevices(driver, vm->def->name, &hostdev, 1); + if (teardowncgroup && qemuTeardownHostdevCgroup(vm, hostdev) < 0) + VIR_WARN("Unable to remove host device cgroup ACL on hotplug fail"); + } VIR_FREE(drvstr); VIR_FREE(devstr); return ret; @@ -1553,12 +1578,9 @@ int qemuDomainAttachHostDevice(virQEMUDriverPtr driver, return -1; } - if (qemuSetupHostdevCGroup(vm, hostdev) < 0) - return -1; - if (virSecurityManagerSetHostdevLabel(driver->securityManager, vm->def, hostdev, NULL) < 0) - goto cleanup; + return -1; switch (hostdev->source.subsys.type) { case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI: @@ -1592,10 +1614,6 @@ error: if (virSecurityManagerRestoreHostdevLabel(driver->securityManager, vm->def, hostdev, NULL) < 0) VIR_WARN("Unable to restore host device labelling on hotplug fail"); - -cleanup: - if (qemuTeardownHostdevCgroup(vm, hostdev) < 0) - VIR_WARN("Unable to remove host device cgroup ACL on hotplug fail"); return -1; } -- 1.8.4.3

3 3

Re: [libvirt] [Qemu-devel] -vga std vs. -device VGA
by Eric Blake 15 Nov '13

15 Nov '13

[adding libvirt] On 11/13/2013 10:01 PM, Alexey Kardashevskiy wrote: > Hi everyone. > > Here is a problem with the SPAPR machine and a libvirt's habit to use > "-nodefaults". > > When we run QEMU with "-vga std", a VGA device is created from the > machine_init callback and if VGA is added, then we automatically add a PCI > USB OHCI adapter with a keyboard and everybody (SLOF, yaboot, guest kernel) > is happy - there are both input and output devices. > > However libvirt uses "-device VGA" to create a VGA device. In this case the > actual VGA device is created in vl.c and we (SPAPR) do not have control > over this process so we do not automatically create anything in addition to > VGA. As a result, yaboot fails as there is no input device. > > x86 creates a whole bunch of various devices including a keyboard > controller (i8042) even with "-nodefaults" but this is not true for SPAPR. Then libvirt needs to be taught to provide the same devices via -device that would be present during -vga. > > Since we (POWERPC folks) want everything to work as close to x86 as > possible, we need to do something about it :) Hmm, but adding automatic devices in a future qemu release compared to what you do now could be a regression - once libvirt is taught how to provide the correct devices for the qemu that exists now, wouldn't that mean that your automatic device adding creates duplicates? Libvirt uses -nodefaults for a reason - we really don't like automatic devices (especially when the set of WHAT is automatic is prone to change between qemu builds), and would much rather call out everything explicitly so that we can guarantee guest ABI stability across qemu upgrades. > > So the question is - is there any proper (i. e. qemu-upstreamable) way to > detect a VGA device presence and create additional devices (OHCI, keyboard, > mouse) as "-vga" does it now? The machine reset callback is too late for that. > > Or we should just print an error (in QEMU or SLOF) and do nothing and let > the user configure all required devices in libvirt? I'm in favor of printing an error if not enough devices were supplied, and fixing libvirt to supply the correct devices when it doesn't use -vga. -- Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org

2 1

[libvirt] [PATCHv3] maint: Kill usage of atoi()
by Peter Krempa 15 Nov '13

15 Nov '13

Kill the use of atoi() and introduce syntax check to forbid it and it's friends (atol, atoll, atof, atoq). Also fix a typo in variable name holding the cylinders count of a disk pool (apparently unused). examples/domsuspend/suspend.c will need a larger scale refactor as the whole example file is broken thus it will be exempted from the syntax check for now. --- Notes: Version 3: - add TODO to examples/domsuspend/suspend.c to remove the exemption of the syntax check - exemption rule made specific for this file only cfg.mk | 9 +++++++++ examples/domsuspend/suspend.c | 1 + src/conf/storage_conf.h | 2 +- src/qemu/qemu_command.c | 8 ++++++-- src/storage/storage_backend_disk.c | 14 +++++++++----- src/xen/xend_internal.c | 17 +++++++++++++---- 6 files changed, 39 insertions(+), 12 deletions(-) diff --git a/cfg.mk b/cfg.mk index befd231..838934a 100644 --- a/cfg.mk +++ b/cfg.mk @@ -869,6 +869,12 @@ sc_prohibit_getenv: halt='Use virGetEnv{Allow,Block}SUID instead of getenv' \ $(_sc_search_regexp) +sc_prohibit_atoi: + @prohibit='\bato(i|f|l|ll|q) *\(' \ + halt='Use virStrToLong* instead of atoi, atol, atof, atoq, atoll' \ + $(_sc_search_regexp) + + # We don't use this feature of maint.mk. prev_version_file = /dev/null @@ -1040,3 +1046,6 @@ exclude_file_name_regexp--sc_prohibit_int_ijk = \ exclude_file_name_regexp--sc_prohibit_getenv = \ ^tests/.*\.[ch]$$ + +exclude_file_name_regexp--sc_prohibit_atoi= \ + ^examples/domsuspend/suspend.c$$ diff --git a/examples/domsuspend/suspend.c b/examples/domsuspend/suspend.c index 6a0f5c9..5f7a890 100644 --- a/examples/domsuspend/suspend.c +++ b/examples/domsuspend/suspend.c @@ -104,6 +104,7 @@ int main(int argc, char **argv) { } if (argc > 1) { + /* TODO: remove exclusion of this file from syntax check denying atoi */ id = atoi(argv[1]); } if (id == 0) { diff --git a/src/conf/storage_conf.h b/src/conf/storage_conf.h index f062bd8..05c291e 100644 --- a/src/conf/storage_conf.h +++ b/src/conf/storage_conf.h @@ -227,7 +227,7 @@ struct _virStoragePoolSourceDevice { * the geometry data is needed */ struct _geometry { - int cyliders; + int cylinders; int heads; int sectors; } geometry; diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 966aa0d..25beedf 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -3663,8 +3663,12 @@ qemuBuildDriveURIString(virConnectPtr conn, if (disk->src && virAsprintf(&volimg, "/%s", disk->src) < 0) goto cleanup; - if (disk->hosts->port) { - port = atoi(disk->hosts->port); + if (disk->hosts->port && + virStrToLong_i(disk->hosts->port, NULL, 0, &port) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("failed to parse network port '%s'"), + disk->hosts->port); + goto cleanup; } if (disk->hosts->socket && diff --git a/src/storage/storage_backend_disk.c b/src/storage/storage_backend_disk.c index 4e53ec5..a7a7d0e 100644 --- a/src/storage/storage_backend_disk.c +++ b/src/storage/storage_backend_disk.c @@ -280,12 +280,16 @@ virStorageBackendDiskMakePoolGeometry(virStoragePoolObjPtr pool, char **const groups, void *data ATTRIBUTE_UNUSED) { + virStoragePoolSourceDevicePtr device = &(pool->def->source.devices[0]); + if (virStrToLong_i(groups[0], NULL, 0, &device->geometry.cylinders) < 0 || + virStrToLong_i(groups[1], NULL, 0, &device->geometry.heads) < 0 || + virStrToLong_i(groups[2], NULL, 0, &device->geometry.sectors) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("Failed to create disk pool geometry")); + return -1; + } - pool->def->source.devices[0].geometry.cyliders = atoi(groups[0]); - pool->def->source.devices[0].geometry.heads = atoi(groups[1]); - pool->def->source.devices[0].geometry.sectors = atoi(groups[2]); - - return 0; + return 0; } static int diff --git a/src/xen/xend_internal.c b/src/xen/xend_internal.c index dc57350..771288c 100644 --- a/src/xen/xend_internal.c +++ b/src/xen/xend_internal.c @@ -290,10 +290,19 @@ xend_req(int fd, char **content) if (STREQ(buffer, "\r\n")) break; - if (istartswith(buffer, "Content-Length: ")) - content_length = atoi(buffer + 16); - else if (istartswith(buffer, "HTTP/1.1 ")) - retcode = atoi(buffer + 9); + if (istartswith(buffer, "Content-Length: ")) { + if (virStrToLong_i(buffer + 16, NULL, 10, &content_length) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("failed to parse Xend response content length")); + return -1; + } + } else if (istartswith(buffer, "HTTP/1.1 ")) { + if (virStrToLong_i(buffer + 9, NULL, 10, &retcode) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("failed to parse Xend response return code")); + return -1; + } + } } VIR_FREE(buffer); -- 1.8.4.3

2 1

[libvirt] [PATCH] qemuMonitorIO: Don't use @mon after it's unrefed
by Michal Privoznik 15 Nov '13

15 Nov '13

https://bugzilla.redhat.com/show_bug.cgi?id=1018267 The aim of virObject refing and urefing is to tell where the object is to be used and when is no longer needed. Hence any object shouldn't be used after it has been unrefed, as we might be the last to hold the reference. The better way is to call virObjectUnref() *after* the last object usage. In this specific case, the monitor EOF handler was called after the qemuMonitorIO called virObjectUnref. Not only that @mon was disposed (which is not used in the handler anyway) but the @mon->vm which is causing a SIGSEGV: 2013-11-15 10:17:54.425+0000: 20110: error : qemuMonitorIO:688 : internal error: early end of file from monitor: possible problem: qemu-kvm: -incoming tcp:01.01.01.0:49152: Failed to bind socket: Cannot assign requested address Program received signal SIGSEGV, Segmentation fault. qemuProcessHandleMonitorEOF (mon=<optimized out>, vm=0x7fb728004170) at qemu/qemu_process.c:299 299 if (priv->beingDestroyed) { (gdb) p *priv Cannot access memory at address 0x0 (gdb) p vm $1 = (virDomainObj *) 0x7fb728004170 (gdb) p *vm $2 = {parent = {parent = {magic = 3735928559, refs = 0, klass = 0xdeadbeef}, lock = {lock = {__data = {__lock = 2, __count = 0, __owner = 20110, __nusers = 1, __kind = 0, __spins = 0, __list = {__prev = 0x0, __next = 0x0}}, __size = "\002\000\000\000\000\000\000\000\216N\000\000\001", '\000' <repeats 26 times>, __align = 2}}}, pid = 0, state = {state = 0, reason = 0}, autostart = 0, persistent = 0, updated = 0, def = 0x0, newDef = 0x0, snapshots = 0x0, current_snapshot = 0x0, hasManagedSave = false, privateData = 0x0, privateDataFreeFunc = 0x0, taint = 304} Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- src/qemu/qemu_monitor.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c index 30315b3..935f140 100644 --- a/src/qemu/qemu_monitor.c +++ b/src/qemu/qemu_monitor.c @@ -721,33 +721,33 @@ qemuMonitorIO(int watch, int fd, int events, void *opaque) { /* We have to unlock to avoid deadlock against command thread, * but is this safe ? I think it is, because the callback * will try to acquire the virDomainObjPtr mutex next */ if (eof) { qemuMonitorEofNotifyCallback eofNotify = mon->cb->eofNotify; virDomainObjPtr vm = mon->vm; /* Make sure anyone waiting wakes up now */ virCondSignal(&mon->notify); virObjectUnlock(mon); - virObjectUnref(mon); VIR_DEBUG("Triggering EOF callback"); (eofNotify)(mon, vm, mon->callbackOpaque); + virObjectUnref(mon); } else if (error) { qemuMonitorErrorNotifyCallback errorNotify = mon->cb->errorNotify; virDomainObjPtr vm = mon->vm; /* Make sure anyone waiting wakes up now */ virCondSignal(&mon->notify); virObjectUnlock(mon); - virObjectUnref(mon); VIR_DEBUG("Triggering error callback"); (errorNotify)(mon, vm, mon->callbackOpaque); + virObjectUnref(mon); } else { virObjectUnlock(mon); virObjectUnref(mon); } } static qemuMonitorPtr qemuMonitorOpenInternal(virDomainObjPtr vm, int fd, -- 1.8.3.2

2 1

[libvirt] [PATCHv2] maint: Kill usage of atoi()
by Peter Krempa 15 Nov '13

15 Nov '13

Kill the use of atoi() and introduce syntax check to forbit it and it's friends (atol, atoll, atof, atoq). Also fix a typo in variable name holding the cylinders count of a disk pool (apparently unused). --- cfg.mk | 9 +++++++++ src/conf/storage_conf.h | 2 +- src/qemu/qemu_command.c | 8 ++++++-- src/storage/storage_backend_disk.c | 14 +++++++++----- src/xen/xend_internal.c | 17 +++++++++++++---- 5 files changed, 38 insertions(+), 12 deletions(-) diff --git a/cfg.mk b/cfg.mk index befd231..901e307 100644 --- a/cfg.mk +++ b/cfg.mk @@ -869,6 +869,12 @@ sc_prohibit_getenv: halt='Use virGetEnv{Allow,Block}SUID instead of getenv' \ $(_sc_search_regexp) +sc_prohibit_atoi: + @prohibit='\bato(i|f|l|ll|q) *\(' \ + halt='Use virStrToLong* instead of atoi, atol, atof, atoq, atoll' \ + $(_sc_search_regexp) + + # We don't use this feature of maint.mk. prev_version_file = /dev/null @@ -1040,3 +1046,6 @@ exclude_file_name_regexp--sc_prohibit_int_ijk = \ exclude_file_name_regexp--sc_prohibit_getenv = \ ^tests/.*\.[ch]$$ + +exclude_file_name_regexp--sc_prohibit_atoi= \ + ^examples/.*\.[ch]$$ diff --git a/src/conf/storage_conf.h b/src/conf/storage_conf.h index f062bd8..05c291e 100644 --- a/src/conf/storage_conf.h +++ b/src/conf/storage_conf.h @@ -227,7 +227,7 @@ struct _virStoragePoolSourceDevice { * the geometry data is needed */ struct _geometry { - int cyliders; + int cylinders; int heads; int sectors; } geometry; diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 966aa0d..25beedf 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -3663,8 +3663,12 @@ qemuBuildDriveURIString(virConnectPtr conn, if (disk->src && virAsprintf(&volimg, "/%s", disk->src) < 0) goto cleanup; - if (disk->hosts->port) { - port = atoi(disk->hosts->port); + if (disk->hosts->port && + virStrToLong_i(disk->hosts->port, NULL, 0, &port) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("failed to parse network port '%s'"), + disk->hosts->port); + goto cleanup; } if (disk->hosts->socket && diff --git a/src/storage/storage_backend_disk.c b/src/storage/storage_backend_disk.c index 4e53ec5..a7a7d0e 100644 --- a/src/storage/storage_backend_disk.c +++ b/src/storage/storage_backend_disk.c @@ -280,12 +280,16 @@ virStorageBackendDiskMakePoolGeometry(virStoragePoolObjPtr pool, char **const groups, void *data ATTRIBUTE_UNUSED) { + virStoragePoolSourceDevicePtr device = &(pool->def->source.devices[0]); + if (virStrToLong_i(groups[0], NULL, 0, &device->geometry.cylinders) < 0 || + virStrToLong_i(groups[1], NULL, 0, &device->geometry.heads) < 0 || + virStrToLong_i(groups[2], NULL, 0, &device->geometry.sectors) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("Failed to create disk pool geometry")); + return -1; + } - pool->def->source.devices[0].geometry.cyliders = atoi(groups[0]); - pool->def->source.devices[0].geometry.heads = atoi(groups[1]); - pool->def->source.devices[0].geometry.sectors = atoi(groups[2]); - - return 0; + return 0; } static int diff --git a/src/xen/xend_internal.c b/src/xen/xend_internal.c index dc57350..771288c 100644 --- a/src/xen/xend_internal.c +++ b/src/xen/xend_internal.c @@ -290,10 +290,19 @@ xend_req(int fd, char **content) if (STREQ(buffer, "\r\n")) break; - if (istartswith(buffer, "Content-Length: ")) - content_length = atoi(buffer + 16); - else if (istartswith(buffer, "HTTP/1.1 ")) - retcode = atoi(buffer + 9); + if (istartswith(buffer, "Content-Length: ")) { + if (virStrToLong_i(buffer + 16, NULL, 10, &content_length) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("failed to parse Xend response content length")); + return -1; + } + } else if (istartswith(buffer, "HTTP/1.1 ")) { + if (virStrToLong_i(buffer + 9, NULL, 10, &retcode) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("failed to parse Xend response return code")); + return -1; + } + } } VIR_FREE(buffer); -- 1.8.4.3

2 5

[libvirt] [PATCH] Fix migration with qemu 1.6
by whitearchey 15 Nov '13

15 Nov '13

QEMU 1.6.0 introduced new migration status: setup Libvirt does not expect such string in QMP and refuses to migrate with error "unexpected migration status in setup" This patch fixes it. diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c index a3d986f..4b5fdba 100644 --- a/src/qemu/qemu_migration.c +++ b/src/qemu/qemu_migration.c @@ -1644,6 +1644,10 @@ qemuMigrationUpdateJobStatus(virQEMUDriverPtr driver, _("%s: %s"), job, _("is not active")); break; + case QEMU_MONITOR_MIGRATION_STATUS_SETUP: + ret = 0; + break; + case QEMU_MONITOR_MIGRATION_STATUS_ACTIVE: priv->job.info.fileTotal = priv->job.status.disk_total; priv->job.info.fileRemaining = priv->job.status.disk_remaining; diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c index 30315b3..0d4598e 100644 --- a/src/qemu/qemu_monitor.c +++ b/src/qemu/qemu_monitor.c @@ -114,7 +114,7 @@ VIR_ONCE_GLOBAL_INIT(qemuMonitor) VIR_ENUM_IMPL(qemuMonitorMigrationStatus, QEMU_MONITOR_MIGRATION_STATUS_LAST, - "inactive", "active", "completed", "failed", "cancelled") + "inactive", "active", "completed", "failed", "cancelled", "setup") VIR_ENUM_IMPL(qemuMonitorMigrationCaps, QEMU_MONITOR_MIGRATION_CAPS_LAST, diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h index f893b1f..eabf000 100644 --- a/src/qemu/qemu_monitor.h +++ b/src/qemu/qemu_monitor.h @@ -397,6 +397,7 @@ enum { QEMU_MONITOR_MIGRATION_STATUS_COMPLETED, QEMU_MONITOR_MIGRATION_STATUS_ERROR, QEMU_MONITOR_MIGRATION_STATUS_CANCELLED, + QEMU_MONITOR_MIGRATION_STATUS_SETUP, QEMU_MONITOR_MIGRATION_STATUS_LAST };

3 2