March 2012 - Devel - libvirt List Archives

[libvirt] [PATCH 0/2] atomic snapshots, round 2
by Eric Blake 23 Mar '12

23 Mar '12

Depends on round 1 v2 being applied first: https://www.redhat.com/archives/libvir-list/2012-March/msg00747.html So far, I've tested that the error handling path works when targeting the qemu of Fedora 16; I still plan to test that the success path works with a self-built qemu using the code that has been accepted for the upcoming qemu 1.1. Eric Blake (2): snapshot: add support for qemu transaction command snapshot: wire up qemu transaction command src/qemu/qemu_driver.c | 112 ++++++++++++++++++++++++++++++++++++++++-- src/qemu/qemu_monitor.c | 33 ++++++++++-- src/qemu/qemu_monitor.h | 4 ++ src/qemu/qemu_monitor_json.c | 82 ++++++++++++++++++++++++------- src/qemu/qemu_monitor_json.h | 2 + 5 files changed, 205 insertions(+), 28 deletions(-) -- 1.7.7.6

2 6

[libvirt] [PATCH 0/3] atomic snapshots, round 1
by Eric Blake 23 Mar '12

23 Mar '12

I figured it's better to post small patch series for incremental review than to slam the list with a 20 patch series. I'm in the middle of coding up my RFC for interaction with the new qemu 1.1 'transaction' monitor command, and this is the first step. [1] https://www.redhat.com/archives/libvir-list/2012-March/msg00578.html To avoid a merge conflict, this patch [2] needs to be applied first. [2] https://www.redhat.com/archives/libvir-list/2012-March/msg00744.html Eric Blake (3): snapshot: add qemu capability for 'transaction' command snapshot: add atomic create flag snapshot: rudimentary qemu support for atomic disk snapshot include/libvirt/libvirt.h.in | 2 ++ src/libvirt.c | 21 ++++++++++++++------- src/qemu/qemu_capabilities.c | 1 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_driver.c | 40 +++++++++++++++++++++++++++------------- src/qemu/qemu_monitor_json.c | 3 +++ tools/virsh.c | 6 ++++++ tools/virsh.pod | 16 ++++++++++++++-- 8 files changed, 68 insertions(+), 22 deletions(-) -- 1.7.7.6

2 13

[libvirt] [PATCH 00/14] Support reading auth credentials from a config file
by Daniel P. Berrange 23 Mar '12

23 Mar '12

When connecting to a remote libvirtd, or hypervisor that requires authentication we have callbacks which can be used to prompt for various credentials. This is tedious if you are looking to automate stuff though. While we could let each application implement a custom auth callback for fetching credentials from a config file, it is nicer if we provide this ability directly in libvirt, so that all apps can benefit from it. So this series introduces a new config file in which authentication credentials can be placed. It supports setting multiple sets of credentials, of varying types in one file. I use the '.ini' config file syntax, since this makes it easy to reuse the same config file in virt-viewer & similar apps to store VNC / SPICE credentials. To find the config file we check for each of - Path from LIBVIRT_AUTH_FILE env var - Query param 'authfile=PATH' in the URI params - /etc/libvirt/auth.conf - $HOME/.libvirt/auth.conf if no config file is present, everything should carry on as normal. If the config is present, then it is consulted to fill in credentials first. Only if there are still missing credentials, will the auth callbacks then be invoked. See the docs in patch 12 of this series for the config file syntax examples. This is supported for all drivers that do auth, remote, esx, xenapi, hyperv and phyp, though I have only tested it with the remote driver. I would appreciate someone giving it a go with the other drivers. The first 7 patches are actually all related to the viruri.[ch] file, expanding its functionality & adding tests. This is to make sure the auth config patches can have easy access to the query params. The last 7 patches are related to the auth config file support again including tests

3 37

[libvirt] [PATCH] build: fix incorrect enum declaration
by Eric Blake 23 Mar '12

23 Mar '12

Recent changes have caused build failures on builds where pdwtags works: commit a26a196 mistakenly exported a public variable commits a26a196, 57ddcc2, 487c063 all had copy-paste bugs in hand-updating the golden API rather than rerunning pdwtags * include/libvirt/libvirt.h.in (virDomainEventTrayChangeReason): Make this a typedef, not external storage. * src/remote_protocol-structs (remote_procedure): Fix spelling. --- Pushing under the build-breaker rule, as 'make -C src check' failed. The build is still broken, though, due to a missing qparams.h file causing 'make -C tests check' to fail. include/libvirt/libvirt.h.in | 2 +- src/remote_protocol-structs | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in index c702e66..8bb5c57 100644 --- a/include/libvirt/libvirt.h.in +++ b/include/libvirt/libvirt.h.in @@ -3684,7 +3684,7 @@ typedef void (*virConnectDomainEventDiskChangeCallback)(virConnectPtr conn, * * The reason describing why the callback was called */ -enum { +typedef enum { VIR_DOMAIN_EVENT_TRAY_CHANGE_OPEN = 0, VIR_DOMAIN_EVENT_TRAY_CHANGE_CLOSE, diff --git a/src/remote_protocol-structs b/src/remote_protocol-structs index 474e574..9b2414f 100644 --- a/src/remote_protocol-structs +++ b/src/remote_protocol-structs @@ -1654,13 +1654,13 @@ struct remote_domain_event_tray_change_msg { remote_nonnull_domain dom; remote_nonnull_string devAlias; int reason; -} +}; struct remote_domain_event_pmwakeup_msg { remote_nonnull_domain dom; -} +}; struct remote_domain_event_pmsuspend_msg { remote_nonnull_domain dom; -} +}; struct remote_domain_managed_save_args { remote_nonnull_domain dom; u_int flags; @@ -2189,7 +2189,7 @@ enum remote_procedure { REMOTE_PROC_DOMAIN_GET_METADATA = 265, REMOTE_PROC_DOMAIN_BLOCK_REBASE = 266, REMOTE_PROC_DOMAIN_PM_WAKEUP = 267, - REMOTE_PROC_DOMAIN_TRAY_CHANGE = 268, - REMOTE_PROC_DOMAIN_PMWAKEUP = 269, - REMOTE_PROC_DOMAIN_PMSUSPEND = 270, + REMOTE_PROC_DOMAIN_EVENT_TRAY_CHANGE = 268, + REMOTE_PROC_DOMAIN_EVENT_PMWAKEUP = 269, + REMOTE_PROC_DOMAIN_EVENT_PMSUSPEND = 270, }; -- 1.7.7.6

1 0

[libvirt] [PATCH 0/6] atomic snapshots, rounds 4 and 5
by Eric Blake 23 Mar '12

23 Mar '12

I was originally going to send this as two rounds, one for the XML additions of adding mirrors, and one for the flag addition to virDomainSnapshotDelete for mapping to drive-reopen; but it turned out that testing is easier if I finish the series. Note that this is minimally tested at the moment; I'm posting it to get review started, but I plan on hammering it tomorrow, and possibly coming up with slight alterations for a v2. This assumes that rounds 1-3 (ending here) have been applied: https://www.redhat.com/archives/libvir-list/2012-March/msg00846.html This should finish out my RFC here: https://www.redhat.com/archives/libvir-list/2012-March/msg00578.html but with one major caveat: https://lists.gnu.org/archive/html/qemu-devel/2012-03/msg01524.html Upstream qemu has not yet committed the 'drive-mirror' or 'drive-reopen' monitor commands, which this series (rounds 4-5) depends on. There are still bugs being worked out under the hood on the qemu side, and there is a slight possibility that fixing those bugs may change the public interface. Therefore, part of the review of this series should be to determine whether we take the risk of applying the patch now, or waiting for qemu to stabilize a bit further. I will probably push rounds 1-3 tomorrow, since they have been ACK'd (well, round 3 is still awaiting review), and since qemu has committed to the 'transaction' monitor command for qemu 1.1. For reference, it is likely that RHEL 6.3 will not wait for qemu 1.1, but will instead provide RHEL-specific monitor commands named __com.redhat_drive-mirror and __com.redhat_drive-reopen; I have hopefully structured things well enough that it will be a couple lines of patching to qemu_monitor_json.c to recognize that alternate command name. Eric Blake (6): snapshot: allow for creation of mirrored snapshots snapshot: add new snapshot delete flags snapshot: make it possible to check for mirrored snapshot snapshot: expose qemu commands for mirrored storage migration snapshot: implement new snapshot delete flags in qemu snapshot: enable mirrored snapshots on transient vm docs/formatsnapshot.html.in | 31 +++ docs/schemas/domainsnapshot.rng | 8 + include/libvirt/libvirt.h.in | 6 + src/conf/domain_conf.c | 58 +++++- src/conf/domain_conf.h | 4 + src/libvirt.c | 37 +++- src/libvirt_private.syms | 2 + src/qemu/qemu_capabilities.c | 3 + src/qemu/qemu_capabilities.h | 2 + src/qemu/qemu_driver.c | 242 +++++++++++++++++++- src/qemu/qemu_monitor.c | 50 ++++ src/qemu/qemu_monitor.h | 14 ++ src/qemu/qemu_monitor_json.c | 70 ++++++- src/qemu/qemu_monitor_json.h | 21 ++- .../disk_snapshot_mirror.xml | 13 + .../disk_snapshot_mirror.xml | 49 ++++ tests/domainsnapshotxml2xmltest.c | 4 +- tools/virsh.c | 13 + tools/virsh.pod | 21 ++- 19 files changed, 622 insertions(+), 26 deletions(-) create mode 100644 tests/domainsnapshotxml2xmlin/disk_snapshot_mirror.xml create mode 100644 tests/domainsnapshotxml2xmlout/disk_snapshot_mirror.xml -- 1.7.7.6

2 9

[libvirt] [PATCH 0/11 v2] Add supports for three new QMP events
by Osier Yang 23 Mar '12

23 Mar '12

v1 ~ v2: * Two more patches, [5/11] to prohibit tray='open' for block type disk. And [9/11] to introduce a new domain state 'pmsuspended' * Definition (including name) for DEVICE_TRAY_MOVED event is changed into: typedef void (*virConnectDomainEventTrayChangeCallback)(virConnectPtr conn, virDomainPtr dom, const char *devAlias, int reason, void *opaque); * Definition for both SUSPEND and WAKEUP event are changed, one more parameter 'int reason' for future extension. * While SUSPEND event is emitted, the running domain will be transfered into the new domain state "pmsuspended", instead of "paused". And while WAKEUP is emitted, it will transfer the domain state to running only if the domain state is "pmsuspended". This patch series adds support for 3 new QMP events: WAKEUP, SUSPEND, and DEVICE_TRAY_MOVED, and related changes on domain's conf and status. [1/11] Add support for tray moved event [2/11] ~ [6/11]: New attribute "tray" is added to disk target, it indicates the tray status of removable disk, i.e. CDROM and Floppy disks, its value could be either of "open" or "closed", defaults to "closed", and a removable disk with tray == "open" won't have the source when domain is started. The value of "tray" will be updated while tray moved event is emitted from guest. tray status 'open' is prohibited for block type disk. Prior to these patches, if the user ejected the medium of removable disk from guest side, and then do migration or save/restoring, the guest will still starts the medium source ,and thus the medium will still exists in guest, which is strange. These patches fix it. [7/11] + [11/11]: Add support for wakeup event, and update the domain status to running if the domain is in pmsuspended state, while the wakeup event is emitted. [9/11] Introduce new domain state "pmsuspended", which indicates the domain has been suspended by guest power management, e.g, entered into s3 state. [8/11] + [10/11]: Add support for suspend event, and update the domain status to pmsuspended if the domain was running, while the suspend event is emitted. Osier Yang(11) Add support for event tray moved of removable disks docs: Add documentation for new attribute tray of disk target conf: Parse and for the tray attribute qemu: Do not start with source for removable disks if tray is open qemu: Prohibit setting tray status as open for block type disk qemu: Update tray status while tray moved event is emitted Add support for the wakeup event Add support for the suspend event New domain state pmsuspended qemu: Update domain state to pmsuspended while suspend event occurs qemu: Update domain status to running while wakeup event is emitted daemon/remote.c | 79 ++++++++++ docs/formatdomain.html.in | 13 ++- docs/schemas/domaincommon.rng | 8 + examples/domain-events/events-c/event-test.c | 66 +++++++++- examples/domain-events/events-python/event-test.py | 12 ++ include/libvirt/libvirt.h.in | 98 ++++++++++++- python/libvirt-override-virConnect.py | 27 ++++ python/libvirt-override.c | 150 ++++++++++++++++++++ src/conf/domain_conf.c | 71 ++++++++-- src/conf/domain_conf.h | 9 ++ src/conf/domain_event.c | 115 +++++++++++++++ src/conf/domain_event.h | 10 ++ src/libvirt_private.syms | 6 + src/qemu/qemu_command.c | 31 ++++- src/qemu/qemu_monitor.c | 33 +++++ src/qemu/qemu_monitor.h | 16 ++- src/qemu/qemu_monitor_json.c | 45 ++++++ src/qemu/qemu_process.c | 121 ++++++++++++++++ src/remote/remote_driver.c | 95 ++++++++++++ src/remote/remote_protocol.x | 19 +++- src/remote_protocol-structs | 14 ++ tests/qemuxml2argvdata/qemuxml2argv-boot-cdrom.xml | 2 +- .../qemuxml2argv-boot-complex-bootindex.xml | 6 +- .../qemuxml2argvdata/qemuxml2argv-boot-complex.xml | 6 +- .../qemuxml2argvdata/qemuxml2argv-boot-floppy.xml | 2 +- ...uxml2argv-boot-menu-disable-drive-bootindex.xml | 2 +- .../qemuxml2argv-boot-menu-disable-drive.xml | 2 +- .../qemuxml2argv-boot-menu-disable.xml | 2 +- .../qemuxml2argv-boot-menu-enable.xml | 2 +- tests/qemuxml2argvdata/qemuxml2argv-boot-multi.xml | 2 +- tests/qemuxml2argvdata/qemuxml2argv-boot-order.xml | 4 +- tests/qemuxml2argvdata/qemuxml2argv-bootloader.xml | 2 +- tests/qemuxml2argvdata/qemuxml2argv-disk-aio.xml | 2 +- .../qemuxml2argv-disk-cdrom-empty.xml | 2 +- ...qemuxml2argv-disk-cdrom-tray-no-device-cap.args | 4 + .../qemuxml2argv-disk-cdrom-tray-no-device-cap.xml | 32 ++++ .../qemuxml2argv-disk-cdrom-tray.args | 10 ++ .../qemuxml2argv-disk-cdrom-tray.xml | 43 ++++++ tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom.xml | 2 +- .../qemuxml2argv-disk-copy_on_read.xml | 2 +- .../qemuxml2argv-disk-drive-boot-cdrom.xml | 2 +- .../qemuxml2argv-disk-drive-boot-disk.xml | 2 +- .../qemuxml2argv-disk-drive-cache-directsync.xml | 2 +- .../qemuxml2argv-disk-drive-cache-unsafe.xml | 2 +- .../qemuxml2argv-disk-drive-cache-v1-none.xml | 2 +- .../qemuxml2argv-disk-drive-cache-v1-wb.xml | 2 +- .../qemuxml2argv-disk-drive-cache-v1-wt.xml | 2 +- .../qemuxml2argv-disk-drive-cache-v2-none.xml | 2 +- .../qemuxml2argv-disk-drive-cache-v2-wb.xml | 2 +- .../qemuxml2argv-disk-drive-cache-v2-wt.xml | 2 +- ...muxml2argv-disk-drive-error-policy-enospace.xml | 2 +- .../qemuxml2argv-disk-drive-error-policy-stop.xml | 2 +- ...rgv-disk-drive-error-policy-wreport-rignore.xml | 2 +- .../qemuxml2argv-disk-drive-fmt-qcow.xml | 2 +- .../qemuxml2argv-disk-drive-no-boot.xml | 4 +- .../qemuxml2argv-disk-drive-readonly-disk.xml | 2 +- .../qemuxml2argv-disk-drive-readonly-no-device.xml | 2 +- .../qemuxml2argv-disk-drive-shared.xml | 2 +- ...emuxml2argv-disk-floppy-tray-no-device-cap.args | 4 + ...qemuxml2argv-disk-floppy-tray-no-device-cap.xml | 37 +++++ .../qemuxml2argv-disk-floppy-tray.args | 10 ++ .../qemuxml2argv-disk-floppy-tray.xml | 37 +++++ .../qemuxml2argvdata/qemuxml2argv-disk-floppy.xml | 4 +- .../qemuxml2argv-disk-ioeventfd.xml | 2 +- tests/qemuxml2argvdata/qemuxml2argv-disk-order.xml | 2 +- .../qemuxml2argv-disk-snapshot.xml | 2 +- .../qemuxml2argvdata/qemuxml2argv-disk-virtio.xml | 2 +- .../qemuxml2argvdata/qemuxml2argv-disk-xenvbd.xml | 2 +- tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml | 2 +- .../qemuxml2argv-floppy-drive-fat.xml | 2 +- .../qemuxml2argv-graphics-spice-timeout.xml | 2 +- tests/qemuxml2argvdata/qemuxml2argv-lease.xml | 2 +- .../qemuxml2argv-net-bandwidth.xml | 2 +- tests/qemuxml2argvtest.c | 6 + .../qemuxml2xmlout-graphics-spice-timeout.xml | 2 +- tests/vmx2xmldata/vmx2xml-cdrom-ide-device.xml | 2 +- tests/vmx2xmldata/vmx2xml-cdrom-ide-file.xml | 2 +- tests/vmx2xmldata/vmx2xml-cdrom-scsi-device.xml | 2 +- tests/vmx2xmldata/vmx2xml-cdrom-scsi-file.xml | 2 +- tests/vmx2xmldata/vmx2xml-esx-in-the-wild-2.xml | 8 +- tests/vmx2xmldata/vmx2xml-esx-in-the-wild-3.xml | 4 +- tests/vmx2xmldata/vmx2xml-esx-in-the-wild-5.xml | 2 +- tests/vmx2xmldata/vmx2xml-esx-in-the-wild-6.xml | 2 +- tests/vmx2xmldata/vmx2xml-floppy-device.xml | 2 +- tests/vmx2xmldata/vmx2xml-floppy-file.xml | 2 +- tests/vmx2xmldata/vmx2xml-ws-in-the-wild-1.xml | 2 +- tests/vmx2xmldata/vmx2xml-ws-in-the-wild-2.xml | 2 +- tools/virsh.c | 12 ++ tools/virsh.pod | 7 +- 89 files changed, 1277 insertions(+), 99 deletions(-) Osier

2 26

[libvirt] [PATCH v3 0/3] Sysinfo improvements for PowerPC & x86
by Prerna 23 Mar '12

23 Mar '12

This series of patches implements the following: Patch 1/2 : Implement sysinfo for PowerPC. OnPowerPC, sysinfo is obtained by reading /proc/cpuinfo since dmidecode is not available. Patch 2/2 : Based on Eric's suggestion (http://www.redhat.com/archives/libvir-list/2012-February/msg00509.html) Allow x86 to read host system's processor information from /proc/cpuinfo in the event dmidecode is not available. Changelog : ----------- v1->v2 : * Rebased and cleanups done. v2->v3: * Patch 1/2 : rebased. * Patch 2/2 : As reported by Daniel, it was found that 'dmidecode' lists socket (and not core-level) information under the <processor> XML tag. The /proc/cpuinfo fallback is also accordingly modified to display a listing of the available sockets under the '<processor>' XML tag under sysinfo. (http://www.spinics.net/linux/fedora/libvir/msg53922.html) Thanks, -- Prerna Saxena Linux Technology Centre, IBM Systems and Technology Lab, Bangalore, India

2 5

[libvirt] clarify freecell documentation v2
by Dave Allan 23 Mar '12

23 Mar '12

Modified per Eric's feedback: removed incorrect virsh help change, removed unnecessary examples in the manpage. I also fixed two instances in which I referred to nodes instead of cells. Dave

2 3

[libvirt] [PATCH] libvirt:docs: fix typo
by Zhou Peng 22 Mar '12

22 Mar '12

--- docs/formatdomain.html.in | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index 4edada3..3a504a1 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -2903,8 +2903,8 @@ qemu-kvm -net nic,model=? /dev/null 0.9.3. - Mouse mode is set by the <code>mouse<code/> element, - setting it's <code>mode<code/> attribute to one of + Mouse mode is set by the <code>mouse</code> element, + setting it's <code>mode</code> attribute to one of <code>server</code> or <code>client</code> , since 0.9.11. If no mode is specified, the qemu default will be used (client mode). -- 1.7.7.6

2 1

Re: [libvirt] [libvirt PATCHv6 1/1] add DHCP snooping
by David Stevens 22 Mar '12

22 Mar '12

Stefan Berger/Watson/IBM wrote on 03/22/2012 05:33:41 PM: > > Ok. > An idea may be that the threat has to 'find' its snoop request in a > global list every time it processes a packet. Once it cannot find it > anymore, it dies. Removing the request from the global list would be > the way to terminate the threat. Also, it would have to hold a look > to the snoop request while it does anything else than waiting for > packets in the pcap library. Actually, that's exactly what I was going to do -- a hash list of valid threads and exit if it isn't in the list; then still remove the req's and free them as the current code does, which means they won't interfere with each other, but the cancel code can be separated, in the same place, but synchronous with no signal; Thread management independent of req management. +_DLS

1 0