[libvirt] Modern CPU models cannot be used with libvirt
by Jiri Denemark
Hi,
Recently I realized that all modern CPU models defined in
/etc/qemu/target-x86_64.conf are useless when qemu is used through libvirt.
That's because we start qemu with -nodefconfig which results in qemu ignoring
that file with CPU model definitions. We have a very good reason for using
-nodefconfig because we need to control the ABI presented to a guest OS and we
don't want any configuration file that can contain lots of things including
device definitions to be read by qemu. However, we would really like the new
CPU models to be understood by qemu even if used through libvirt. What would
be the best way to solve this?
I suspect this could have been already discussed in the past but obviously a
workable solution was either not found or just not implemented.
Jirka
12 years, 1 month
[libvirt] [PATCHv4 0/3] Xen: Fix <clock> handling
by Philipp Hahn
Before version 3.1 xen only implemented clock/@offset='utc' and 'localtime'.
With the introduction of managed domains in 3.1 xend keeps track of the
rtc_timeoffset, even over reboots. This translates to libvirts
clock/@offset='variable' variant. Be advised that only HV domains have a RTC.
In addition xen also supports a variant where the offset is tracked to
'localtime', which is currently not supported by libvirt. To make matters
worse, this was somehow broken in some versions of xen and was finally fixed
with version xen-3.4.
The following patch set ...
* adds support for handling variable offsets relative to localtime,
* fixes libvirt to use clock/@offset='variable' for newer xen versions,
* adapts the test suit accordingly
I've tested this on CenOS5 (xend-3.0.3 + 3.1.2 hypervisor?), UCS-2.3
(xen-3.2.1), UCS-2.4 (xen-3.4.3) and UCS-3.0 (xen-4.1.2).
Since v1:
+ fix handling of direct-PV-domains
+ added handling of localtime=1 + rtc_timeoffset
+ fixed test suite
Since v2: (on feedback by Eric)
+ add the adjustment='reset' attribute to force the old behaviour
+ handle adjustment='$timeDelta' as a short-cut for the conversion to variable.
+ simplify error path handling
+ update version numbers to 0.9.11
Since v3:
+ Add missing offset=VARIALE for adjustment='$timeDelta' conversion.
Philipp Hahn (3):
Support clock=variable relative to localtime
Xen: Fix <clock> handling
Xen: Adapt <clock> tests
docs/formatdomain.html.in | 18 ++-
docs/schemas/domaincommon.rng | 30 +++-
src/conf/domain_conf.c | 61 +++++++-
src/conf/domain_conf.h | 17 ++-
src/libvirt_private.syms | 1 +
src/qemu/qemu_command.c | 8 +-
src/qemu/qemu_process.c | 2 +-
src/xenxs/xen_sxpr.c | 167 +++++++++++++++-----
src/xenxs/xen_xm.c | 123 ++++++++++++---
.../qemuxml2argv-clock-variable.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-boot-grub.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-bridge-ipaddr.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-curmem.xml | 2 +-
.../sexpr2xml-disk-block-shareable.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-disk-block.xml | 2 +-
.../sexpr2xml-disk-drv-blktap-qcow.xml | 2 +-
.../sexpr2xml-disk-drv-blktap-raw.xml | 2 +-
.../sexpr2xml-disk-drv-blktap2-raw.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-disk-file.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-autoport.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-empty-kernel.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-force-hpet.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-force-nohpet.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-kernel.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-legacy-vfb.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-localtime.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-net-ioemu.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-net-netfront.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-parallel-tcp.xml | 2 +-
.../sexpr2xml-fv-serial-dev-2-ports.xml | 2 +-
.../sexpr2xml-fv-serial-dev-2nd-port.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-serial-file.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-serial-null.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-serial-pipe.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-serial-pty.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-serial-stdio.xml | 2 +-
.../sexpr2xml-fv-serial-tcp-telnet.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-serial-tcp.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-serial-udp.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-serial-unix.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-sound-all.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-sound.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-usbmouse.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-usbtablet.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-utc.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv-v2.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-fv.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-net-bridged.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-net-e1000.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-net-routed.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-pci-devs.xml | 2 +-
.../sexpr2xml-pv-bootloader-cmdline.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-pv-bootloader.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-pv-localtime.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml | 2 +-
.../sexpr2xml-pv-vfb-new-vncdisplay.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-pv-vfb-new.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-pv-vfb-orig.xml | 2 +-
.../sexpr2xmldata/sexpr2xml-pv-vfb-type-crash.xml | 2 +-
tests/sexpr2xmldata/sexpr2xml-pv.xml | 2 +-
tests/xmconfigdata/sexpr2xml-pv-bootloader.cfg | 1 +
tests/xmconfigdata/test-escape-paths.xml | 2 +-
tests/xmconfigdata/test-fullvirt-force-hpet.cfg | 2 +-
tests/xmconfigdata/test-fullvirt-force-hpet.xml | 2 +-
tests/xmconfigdata/test-fullvirt-force-nohpet.cfg | 2 +-
tests/xmconfigdata/test-fullvirt-force-nohpet.xml | 2 +-
tests/xmconfigdata/test-fullvirt-localtime.xml | 2 +-
tests/xmconfigdata/test-fullvirt-net-ioemu.xml | 2 +-
tests/xmconfigdata/test-fullvirt-net-netfront.xml | 2 +-
tests/xmconfigdata/test-fullvirt-new-cdrom.xml | 2 +-
tests/xmconfigdata/test-fullvirt-old-cdrom.cfg | 2 +-
tests/xmconfigdata/test-fullvirt-old-cdrom.xml | 2 +-
tests/xmconfigdata/test-fullvirt-parallel-tcp.xml | 2 +-
.../test-fullvirt-serial-dev-2-ports.xml | 2 +-
.../test-fullvirt-serial-dev-2nd-port.xml | 2 +-
tests/xmconfigdata/test-fullvirt-serial-file.xml | 2 +-
tests/xmconfigdata/test-fullvirt-serial-null.xml | 2 +-
tests/xmconfigdata/test-fullvirt-serial-pipe.xml | 2 +-
tests/xmconfigdata/test-fullvirt-serial-pty.xml | 2 +-
tests/xmconfigdata/test-fullvirt-serial-stdio.xml | 2 +-
.../test-fullvirt-serial-tcp-telnet.xml | 2 +-
tests/xmconfigdata/test-fullvirt-serial-tcp.xml | 2 +-
tests/xmconfigdata/test-fullvirt-serial-udp.xml | 2 +-
tests/xmconfigdata/test-fullvirt-serial-unix.xml | 2 +-
tests/xmconfigdata/test-fullvirt-sound.xml | 2 +-
tests/xmconfigdata/test-fullvirt-usbmouse.xml | 2 +-
.../test-fullvirt-usbtablet-no-bus.xml | 2 +-
tests/xmconfigdata/test-fullvirt-usbtablet.xml | 2 +-
tests/xmconfigdata/test-fullvirt-utc.xml | 2 +-
tests/xmconfigdata/test-no-source-cdrom.xml | 2 +-
tests/xmconfigdata/test-paravirt-net-e1000.cfg | 1 +
tests/xmconfigdata/test-paravirt-net-e1000.xml | 2 +-
tests/xmconfigdata/test-paravirt-net-vifname.cfg | 1 +
tests/xmconfigdata/test-paravirt-net-vifname.xml | 2 +-
.../test-paravirt-new-pvfb-vncdisplay.cfg | 1 +
.../test-paravirt-new-pvfb-vncdisplay.xml | 2 +-
tests/xmconfigdata/test-paravirt-new-pvfb.cfg | 1 +
tests/xmconfigdata/test-paravirt-new-pvfb.xml | 2 +-
.../test-paravirt-old-pvfb-vncdisplay.cfg | 1 +
.../test-paravirt-old-pvfb-vncdisplay.xml | 2 +-
tests/xmconfigdata/test-paravirt-old-pvfb.cfg | 1 +
tests/xmconfigdata/test-paravirt-old-pvfb.xml | 2 +-
tests/xmconfigdata/test-paravirt-vcpu.cfg | 1 +
tests/xmconfigdata/test-paravirt-vcpu.xml | 2 +-
tests/xmconfigdata/test-pci-devs.xml | 2 +-
tests/xml2sexprdata/xml2sexpr-boot-grub.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-bridge-ipaddr.sexpr | 4 +-
tests/xml2sexprdata/xml2sexpr-curmem.sexpr | 1 +
.../xml2sexpr-disk-block-shareable.sexpr | 4 +-
tests/xml2sexprdata/xml2sexpr-disk-block.sexpr | 4 +-
.../xml2sexprdata/xml2sexpr-disk-drv-blkback.sexpr | 4 +-
.../xml2sexpr-disk-drv-blktap-qcow.sexpr | 4 +-
.../xml2sexpr-disk-drv-blktap-raw.sexpr | 4 +-
.../xml2sexprdata/xml2sexpr-disk-drv-blktap.sexpr | 4 +-
.../xml2sexpr-disk-drv-blktap2-raw.sexpr | 4 +-
.../xml2sexprdata/xml2sexpr-disk-drv-blktap2.sexpr | 4 +-
tests/xml2sexprdata/xml2sexpr-disk-drv-loop.sexpr | 4 +-
tests/xml2sexprdata/xml2sexpr-disk-file.sexpr | 4 +-
tests/xml2sexprdata/xml2sexpr-escape.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-fv-force-hpet.sexpr | 1 +
.../xml2sexprdata/xml2sexpr-fv-force-nohpet.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-fv-kernel.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-fv-localtime.sexpr | 5 +-
tests/xml2sexprdata/xml2sexpr-fv-net-ioemu.sexpr | 3 +-
.../xml2sexprdata/xml2sexpr-fv-net-netfront.sexpr | 3 +-
.../xml2sexprdata/xml2sexpr-fv-parallel-tcp.sexpr | 1 +
.../xml2sexpr-fv-serial-dev-2-ports.sexpr | 3 +-
.../xml2sexpr-fv-serial-dev-2nd-port.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-fv-serial-file.sexpr | 3 +-
tests/xml2sexprdata/xml2sexpr-fv-serial-null.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-fv-serial-pipe.sexpr | 3 +-
tests/xml2sexprdata/xml2sexpr-fv-serial-pty.sexpr | 1 +
.../xml2sexprdata/xml2sexpr-fv-serial-stdio.sexpr | 1 +
.../xml2sexpr-fv-serial-tcp-telnet.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-fv-serial-tcp.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-fv-serial-udp.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-fv-serial-unix.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-fv-sound.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-fv-usbmouse.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-fv-usbtablet.sexpr | 3 +-
tests/xml2sexprdata/xml2sexpr-fv-utc.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-fv-v2.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-fv-vncunused.sexpr | 3 +-
tests/xml2sexprdata/xml2sexpr-fv.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-net-bridged.sexpr | 2 +-
tests/xml2sexprdata/xml2sexpr-net-e1000.sexpr | 2 +-
tests/xml2sexprdata/xml2sexpr-net-routed.sexpr | 2 +-
.../xml2sexprdata/xml2sexpr-no-source-cdrom.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-pci-devs.sexpr | 2 +-
.../xml2sexpr-pv-bootloader-cmdline.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-pv-bootloader.sexpr | 4 +-
tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr | 2 +-
.../xml2sexprdata/xml2sexpr-pv-vfb-new-auto.sexpr | 2 +-
tests/xml2sexprdata/xml2sexpr-pv-vfb-new.sexpr | 2 +-
tests/xml2sexprdata/xml2sexpr-pv-vfb-orig.sexpr | 1 +
tests/xml2sexprdata/xml2sexpr-pv.sexpr | 2 +-
157 files changed, 526 insertions(+), 200 deletions(-)
12 years, 2 months
[libvirt] [PATCHv3] python: Avoid memory leaks on libvirt_virNodeGetMemoryStats
by ajia＠redhat.com
From: Alex Jia <ajia(a)redhat.com>
Detected by valgrind. Leaks are introduced in commit 17c7795.
* python/libvirt-override.c (libvirt_virNodeGetMemoryStats): fix memory leaks
and improve codes return value.
For details, please see the following link:
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=770944
Signed-off-by: Alex Jia <ajia(a)redhat.com>
---
python/libvirt-override.c | 46 ++++++++++++++++++++++++++++++--------------
1 files changed, 31 insertions(+), 15 deletions(-)
diff --git a/python/libvirt-override.c b/python/libvirt-override.c
index 792cfa3..fb98627 100644
--- a/python/libvirt-override.c
+++ b/python/libvirt-override.c
@@ -2550,7 +2550,9 @@ libvirt_virNodeGetCPUStats(PyObject *self ATTRIBUTE_UNUSED, PyObject *args)
static PyObject *
libvirt_virNodeGetMemoryStats(PyObject *self ATTRIBUTE_UNUSED, PyObject *args)
{
- PyObject *ret;
+ PyObject *ret = NULL;
+ PyObject *key = NULL;
+ PyObject *val = NULL;
PyObject *pyobj_conn;
virConnectPtr conn;
unsigned int flags;
@@ -2559,39 +2561,53 @@ libvirt_virNodeGetMemoryStats(PyObject *self ATTRIBUTE_UNUSED, PyObject *args)
virNodeMemoryStatsPtr stats = NULL;
if (!PyArg_ParseTuple(args, (char *)"Oii:virNodeGetMemoryStats", &pyobj_conn, &cellNum, &flags))
- return(NULL);
+ return ret;
conn = (virConnectPtr)(PyvirConnect_Get(pyobj_conn));
LIBVIRT_BEGIN_ALLOW_THREADS;
c_retval = virNodeGetMemoryStats(conn, cellNum, NULL, &nparams, flags);
LIBVIRT_END_ALLOW_THREADS;
if (c_retval < 0)
- return VIR_PY_NONE;
+ return ret;
if (nparams) {
if (VIR_ALLOC_N(stats, nparams) < 0)
- return VIR_PY_NONE;
+ return PyErr_NoMemory();
LIBVIRT_BEGIN_ALLOW_THREADS;
c_retval = virNodeGetMemoryStats(conn, cellNum, stats, &nparams, flags);
LIBVIRT_END_ALLOW_THREADS;
- if (c_retval < 0) {
- VIR_FREE(stats);
- return VIR_PY_NONE;
- }
- }
- if (!(ret = PyDict_New())) {
- VIR_FREE(stats);
- return VIR_PY_NONE;
+ if (c_retval < 0)
+ goto error;
}
+
+ if (!(ret = PyDict_New()))
+ goto error;
+
for (i = 0; i < nparams; i++) {
- PyDict_SetItem(ret,
- libvirt_constcharPtrWrap(stats[i].field),
- libvirt_ulonglongWrap(stats[i].value));
+ key = libvirt_constcharPtrWrap(stats[i].field);
+ val = libvirt_ulonglongWrap(stats[i].value);
+
+ if (!key || !val)
+ goto error;
+
+ if (PyDict_SetItem(ret, key, val) < 0) {
+ Py_DECREF(ret);
+ goto error;
+ }
+
+ Py_DECREF(key);
+ Py_DECREF(val);
}
VIR_FREE(stats);
return ret;
+
+error:
+ VIR_FREE(stats);
+ Py_XDECREF(key);
+ Py_XDECREF(val);
+ return ret;
}
static PyObject *
--
1.7.1
12 years, 2 months
[libvirt] [PATCH v2 0/5] Allow hibernation on guests
by Michal Privoznik
As we've added guest agent recently, the whole world
of new functionality has opened. As this patch set,
which allows domains to enter S4 state.
What is needed for this?
Patched qemu. As this is not in qemu git, but patches
are await to be pushed in very short future. They can
be found here:
http://lists.gnu.org/archive/html/qemu-devel/2012-01/msg03261.html
Despite that, if anybody is willing to give me review
if I am going the right way, I'd appreciate it.
One thing, that you'll probably notice is this
'set-support-level' command. Basically, it tells GA what qemu version
is it running on. Ideally, this should be done as soon as
GA starts up. However, that cannot be determined from outside
world as GA doesn't emit any events yet.
Ideally^2 this command should be left out as it should be qemu
who tells its own agent this kind of information.
Anyway, I was going to call this command in qemuProcess{Startup,
Reconnect,Attach}, but it won't work. We need to un-pause guest CPUs
so guest can boot and start GA, but that implies returning from qemuProcess*.
So I am setting this just before 'guest-suspend' command, as
there is one more thing about GA. It is unable to remember anything
upon its restart (GA process). Which has BTW show flaw
in our current code with FS freeze & thaw. If we freeze guest
FS, and somebody restart GA, the simple FS Thaw will not succeed as
GA thinks FS are not frozen. But that's a different cup of tea.
Because of what written above, we need to call set-level
on every suspend.
diff to v1:
-move from misusing virDomainSuspend to brand new
virDomainSuspendForDuration API
Michal Privoznik (5):
qemu-agent: Allow setting supported level
qemu-agent: Create suspend function
Introduce virDomainSuspendForDuration API
qemu: Wire up virDomainSuspendForDuration API
virsh: Expose new virDomainSuspendForDuration API
include/libvirt/libvirt.h.in | 5 ++-
src/driver.h | 6 ++
src/libvirt.c | 58 +++++++++++++++++++++++
src/libvirt_public.syms | 1 +
src/qemu/qemu_agent.c | 105 ++++++++++++++++++++++++++++++++++++++++++
src/qemu/qemu_agent.h | 13 +++++
src/qemu/qemu_driver.c | 93 +++++++++++++++++++++++++++++++++++++
src/qemu/qemu_process.c | 45 +++++++++++++++++-
src/remote/remote_driver.c | 1 +
src/remote/remote_protocol.x | 11 ++++-
src/remote_protocol-structs | 7 +++
tools/virsh.c | 67 +++++++++++++++++++++++++++
tools/virsh.pod | 8 +++
13 files changed, 415 insertions(+), 5 deletions(-)
--
1.7.3.4
12 years, 2 months
Re: [libvirt] Using Libvirt to change the bridge a virtual network card of a running vm is connected to
by Hendrik Schwartke
I wrote a patch to change the mapping between a virtual bridge interface
and the host bridge while the host is up. It's based on commit
6fba577e505611e6c25c68e322942eab7754de7e. The host and the interface
definition I used for testing are also attached.
I would be glad if the patch could be added to the repo.
Patch:
diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c
index 4b60839..f791795 100644
--- a/src/qemu/qemu_hotplug.c
+++ b/src/qemu/qemu_hotplug.c
@@ -40,6 +40,7 @@
#include "qemu_cgroup.h"
#include "locking/domain_lock.h"
#include "network/bridge_driver.h"
+#include "util/virnetdevbridge.h"
#define VIR_FROM_THIS VIR_FROM_QEMU
@@ -1163,6 +1164,28 @@ static virDomainNetDefPtr
qemuDomainFindNet(virDomainObjPtr vm,
return NULL;
}
+int qemuDomainChangeNetBridge(virDomainNetDefPtr olddev,
+ virDomainNetDefPtr newdev)
+{
+ const char *oldbridge=olddev->data.bridge.brname;
+ const char *newbridge=newdev->data.bridge.brname;
+ VIR_DEBUG("Change bridge for interface %s: %s -> %s",
olddev->ifname, oldbridge, newbridge);
+ if(virNetDevBridgeRemovePort(oldbridge, olddev->ifname)<0) {
+ qemuReportError(VIR_ERR_OPERATION_FAILED,
+ _("unable to remove port from bridge"));
+ return -1;
+ }
+ if(virNetDevBridgeAddPort(newbridge, newdev->ifname)<0) {
+ qemuReportError(VIR_ERR_OPERATION_FAILED,
+ _("unable to add port to bridge"));
+ return -1;
+ }
+ VIR_FREE(olddev->data.bridge.brname);
+ olddev->data.bridge.brname=strdup(newbridge);
+ return 0;
+}
+
+
int qemuDomainChangeNetLinkState(struct qemud_driver *driver,
virDomainObjPtr vm,
virDomainNetDefPtr dev,
@@ -1293,6 +1316,12 @@ int qemuDomainChangeNet(struct qemud_driver *driver,
return -1;
}
+ if(olddev->type==VIR_DOMAIN_NET_TYPE_BRIDGE
+ && dev->type==VIR_DOMAIN_NET_TYPE_BRIDGE
+ && STRNEQ(olddev->data.bridge.brname, dev->data.bridge.brname)) {
+ qemuDomainChangeNetBridge(olddev, dev);
+ }
+
if (olddev->linkstate != dev->linkstate) {
if ((ret = qemuDomainChangeNetLinkState(driver, vm, olddev,
dev->linkstate)) < 0)
return ret;
diff --git a/src/qemu/qemu_hotplug.h b/src/qemu/qemu_hotplug.h
index 0310361..1e1f75c 100644
--- a/src/qemu/qemu_hotplug.h
+++ b/src/qemu/qemu_hotplug.h
@@ -80,6 +80,8 @@ int qemuDomainChangeNetLinkState(struct qemud_driver
*driver,
virDomainObjPtr vm,
virDomainNetDefPtr dev,
int linkstate);
+int qemuDomainChangeNetBridge(virDomainNetDefPtr olddev,
+ virDomainNetDefPtr newdev);
int qemuDomainDetachPciDiskDevice(struct qemud_driver *driver,
virDomainObjPtr vm,
virDomainDeviceDefPtr dev);
Host definition:
<domain type='kvm'>
<name>test</name>
<memory>32768</memory>
<currentMemory>32768</currentMemory>
<vcpu>1</vcpu>
<os>
<type arch='x86_64' machine='pc-0.12'>hvm</type>
<boot dev='cdrom'/>
<bootmenu enable='no'/>
</os>
<features>
<acpi/>
<apic/>
<pae/>
</features>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/bin/kvm</emulator>
<controller type='ide' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
<interface type='bridge'>
<mac address='52:54:00:ab:cd:02'/>
<source bridge='br0'/>
<target dev='testif'/>
<link state='up'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
<serial type='pty'>
<target port='0'/>
</serial>
<console type='pty'>
<target type='serial' port='0'/>
</console>
<input type='tablet' bus='usb'/>
<input type='mouse' bus='ps2'/>
<graphics type='vnc' port='-1' autoport='yes'/>
<video>
<model type='cirrus' vram='9216' heads='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<memballoon model='virtio'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</memballoon>
</devices>
</domain>
Interface definition:
<interface type="bridge">
<mac address="52:54:00:ab:cd:02"/>
<source bridge="br1"/>
<target dev="testif"/>
<link state="up"/>
<alias name="net0"/>
<address type="pci" domain="0x0000" bus="0x00" slot="0x03" function="0x0"/>
</interface>
Best regards
Hendrik Schwartke
12 years, 2 months
[libvirt] [PATCH v2 0/3] Use guest agent to quiesce disks
by Michal Privoznik
Since we have qemu guest agent support in libvirt,
we can start wiring up some things that GA already
knows how to do. One of them is file system freeze
and thaw. Domain snapshots can profit from this
functionality.
Michal Privoznik (3):
qemu_agent: Create file system freeze and thaw functions
snapshots: Introduce VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE flag
virsh: Expose new VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE flag
include/libvirt/libvirt.h.in | 4 ++
src/libvirt.c | 6 +++
src/qemu/qemu_agent.c | 74 +++++++++++++++++++++++++++++++++++
src/qemu/qemu_agent.h | 3 +
src/qemu/qemu_driver.c | 87 ++++++++++++++++++++++++++++++++++++++----
tools/virsh.c | 6 +++
tools/virsh.pod | 16 +++++++-
7 files changed, 186 insertions(+), 10 deletions(-)
--
1.7.3.4
12 years, 2 months
[libvirt] [PATCH] qemu: Copy console definition from serial
by Michal Privoznik
Now, when we support multiple consoles per domain,
the vm->def->console[0] can still remain an alias
for vm->def->serial[0]; However, we need to copy
it's source definition as well otherwise we'll regress
on virDomainOpenConsole.
---
src/conf/domain_conf.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++
src/conf/domain_conf.h | 2 +
src/libvirt_private.syms | 1 +
src/qemu/qemu_process.c | 19 +++++++++--
4 files changed, 90 insertions(+), 4 deletions(-)
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index 6b78d97..9b2eb86 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -956,6 +956,78 @@ virDomainChrSourceDefClear(virDomainChrSourceDefPtr def)
}
}
+int
+virDomainChrSourceDefCopy(virDomainChrSourceDefPtr dest,
+ virDomainChrSourceDefPtr src)
+{
+ if (!dest || !src)
+ return -1;
+
+ switch (src->type) {
+ case VIR_DOMAIN_CHR_TYPE_PTY:
+ case VIR_DOMAIN_CHR_TYPE_DEV:
+ case VIR_DOMAIN_CHR_TYPE_FILE:
+ case VIR_DOMAIN_CHR_TYPE_PIPE:
+ if (src->data.file.path &&
+ !(dest->data.file.path = strdup(src->data.file.path))) {
+ virReportOOMError();
+ return -1;
+ }
+ break;
+
+ case VIR_DOMAIN_CHR_TYPE_UDP:
+ if (src->data.udp.bindHost &&
+ !(dest->data.udp.bindHost = strdup(src->data.udp.bindHost))) {
+ virReportOOMError();
+ return -1;
+ }
+
+ if (src->data.udp.bindService &&
+ !(dest->data.udp.bindService = strdup(src->data.udp.bindService))) {
+ virReportOOMError();
+ return -1;
+ }
+
+ if (src->data.udp.connectHost &&
+ !(dest->data.udp.connectHost = strdup(src->data.udp.connectHost))) {
+ virReportOOMError();
+ return -1;
+ }
+
+
+ if (src->data.udp.connectService &&
+ !(dest->data.udp.connectService = strdup(src->data.udp.connectService))) {
+ virReportOOMError();
+ return -1;
+ }
+ break;
+
+ case VIR_DOMAIN_CHR_TYPE_TCP:
+ if (src->data.tcp.host &&
+ !(dest->data.tcp.host = strdup(src->data.tcp.host))) {
+ virReportOOMError();
+ return -1;
+ }
+
+ if (src->data.tcp.service &&
+ !(dest->data.tcp.service = strdup(src->data.tcp.service))) {
+ virReportOOMError();
+ return -1;
+ }
+ break;
+
+ case VIR_DOMAIN_CHR_TYPE_UNIX:
+ if (src->data.nix.path &&
+ !(dest->data.nix.path = strdup(src->data.nix.path))) {
+ virReportOOMError();
+ return -1;
+ }
+ break;
+ }
+
+ return 0;
+}
+
void virDomainChrSourceDefFree(virDomainChrSourceDefPtr def)
{
if (!def)
diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
index c360674..76a8dd7 100644
--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
@@ -1662,6 +1662,8 @@ void virDomainNetDefFree(virDomainNetDefPtr def);
void virDomainSmartcardDefFree(virDomainSmartcardDefPtr def);
void virDomainChrDefFree(virDomainChrDefPtr def);
void virDomainChrSourceDefFree(virDomainChrSourceDefPtr def);
+int virDomainChrSourceDefCopy(virDomainChrSourceDefPtr src,
+ virDomainChrSourceDefPtr dest);
void virDomainSoundDefFree(virDomainSoundDefPtr def);
void virDomainMemballoonDefFree(virDomainMemballoonDefPtr def);
void virDomainWatchdogDefFree(virDomainWatchdogDefPtr def);
diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms
index b9d537e..e6ccf9d 100644
--- a/src/libvirt_private.syms
+++ b/src/libvirt_private.syms
@@ -242,6 +242,7 @@ virDomainChrConsoleTargetTypeToString;
virDomainChrDefForeach;
virDomainChrDefFree;
virDomainChrDefNew;
+virDomainChrSourceDefCopy;
virDomainChrSourceDefFree;
virDomainChrSpicevmcTypeFromString;
virDomainChrSpicevmcTypeToString;
diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
index 2882ef8..e0b1824 100644
--- a/src/qemu/qemu_process.c
+++ b/src/qemu/qemu_process.c
@@ -1163,11 +1163,22 @@ qemuProcessFindCharDevicePTYs(virDomainObjPtr vm,
for (i = 0 ; i < vm->def->nconsoles ; i++) {
virDomainChrDefPtr chr = vm->def->consoles[i];
- if (chr->source.type == VIR_DOMAIN_CHR_TYPE_PTY &&
- chr->targetType == VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_VIRTIO) {
- if ((ret = qemuProcessExtractTTYPath(output, &offset,
- &chr->source.data.file.path)) != 0)
+ /* For historical reasons, console[0] can be just an alias
+ * for serial[0]; That's why we need to update it as well */
+ if (i == 0 && vm->def->nserials &&
+ chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE &&
+ chr->targetType == VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL) {
+ if ((ret = virDomainChrSourceDefCopy(&chr->source,
+ &((vm->def->serials[0])->source))) != 0)
return ret;
+ chr->source.type = VIR_DOMAIN_CHR_TYPE_PTY;
+ } else {
+ if (chr->source.type == VIR_DOMAIN_CHR_TYPE_PTY &&
+ chr->targetType == VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_VIRTIO) {
+ if ((ret = qemuProcessExtractTTYPath(output, &offset,
+ &chr->source.data.file.path)) != 0)
+ return ret;
+ }
}
}
--
1.7.3.4
12 years, 2 months
[libvirt] [PATCH] vmware: detect when a domain was shut down from the inside
by Jean-Baptiste Rouault
This patch adds an internal function vmwareGetVMStatus to
get the real state of the domain. This function is used in
various places in the driver, in particular to detect when
the domain has been shut down by the user with the "halt"
command.
---
src/vmware/vmware_driver.c | 83 +++++++++++++++++++++++++++++++++++++-------
1 files changed, 70 insertions(+), 13 deletions(-)
diff --git a/src/vmware/vmware_driver.c b/src/vmware/vmware_driver.c
index 56e9d2d..6f75f86 100644
--- a/src/vmware/vmware_driver.c
+++ b/src/vmware/vmware_driver.c
@@ -28,6 +28,7 @@
#include "datatypes.h"
#include "virfile.h"
#include "memory.h"
+#include "util.h"
#include "uuid.h"
#include "command.h"
#include "vmx.h"
@@ -181,6 +182,50 @@ vmwareGetVersion(virConnectPtr conn, unsigned long *version)
}
static int
+vmwareGetVMStatus(struct vmware_driver *driver,
+ virDomainObjPtr vm,
+ int *status,
+ int *reason)
+{
+ virCommandPtr cmd;
+ char *outbuf;
+ char *vmxAbsolutePath;
+ int state;
+ int ret = -1;
+
+ cmd = virCommandNewArgList(VMRUN, "-T", vmw_types[driver->type],
+ "list", NULL);
+ virCommandSetOutputBuffer(cmd, &outbuf);
+ if (virCommandRun(cmd, NULL) < 0)
+ goto cleanup;
+
+ state = virDomainObjGetState(vm, reason);
+
+ if (virFileResolveAllLinks(((vmwareDomainPtr) vm->privateData)->vmxPath,
+ &vmxAbsolutePath) == -1)
+ goto cleanup;
+
+ if (strstr(outbuf, vmxAbsolutePath)) {
+ /* If the vmx path is in the output, the domain is running or
+ * is paused but we have no way to detect if it is paused or not. */
+ if (state == VIR_DOMAIN_PAUSED)
+ *status = state;
+ else
+ *status = VIR_DOMAIN_RUNNING;
+ } else {
+ *status = VIR_DOMAIN_SHUTOFF;
+ }
+
+ ret = 0;
+
+cleanup:
+ virCommandFree(cmd);
+ VIR_FREE(outbuf);
+ VIR_FREE(vmxAbsolutePath);
+ return ret;
+}
+
+static int
vmwareStopVM(struct vmware_driver *driver,
virDomainObjPtr vm,
virDomainShutoffReason reason)
@@ -212,12 +257,6 @@ vmwareStartVM(struct vmware_driver *driver, virDomainObjPtr vm)
};
const char *vmxPath = ((vmwareDomainPtr) vm->privateData)->vmxPath;
- if (virDomainObjGetState(vm, NULL) != VIR_DOMAIN_SHUTOFF) {
- vmwareError(VIR_ERR_OPERATION_INVALID, "%s",
- _("domain is not in shutoff state"));
- return -1;
- }
-
vmwareSetSentinal(cmd, vmw_types[driver->type]);
vmwareSetSentinal(cmd, vmxPath);
if (!((vmwareDomainPtr) vm->privateData)->gui)
@@ -317,6 +356,7 @@ vmwareDomainShutdownFlags(virDomainPtr dom,
{
struct vmware_driver *driver = dom->conn->privateData;
virDomainObjPtr vm;
+ int status;
int ret = -1;
virCheckFlags(0, -1);
@@ -331,7 +371,10 @@ vmwareDomainShutdownFlags(virDomainPtr dom,
goto cleanup;
}
- if (virDomainObjGetState(vm, NULL) != VIR_DOMAIN_RUNNING) {
+ if (vmwareGetVMStatus(driver, vm, &status, NULL) == -1)
+ goto cleanup;
+
+ if (status != VIR_DOMAIN_RUNNING) {
vmwareError(VIR_ERR_INTERNAL_ERROR, "%s",
_("domain is not in running state"));
goto cleanup;
@@ -467,6 +510,7 @@ vmwareDomainReboot(virDomainPtr dom, unsigned int flags)
VMRUN, "-T", PROGRAM_SENTINAL,
"reset", PROGRAM_SENTINAL, "soft", NULL
};
+ int status;
int ret = -1;
virCheckFlags(0, -1);
@@ -485,8 +529,10 @@ vmwareDomainReboot(virDomainPtr dom, unsigned int flags)
vmwareSetSentinal(cmd, vmw_types[driver->type]);
vmwareSetSentinal(cmd, vmxPath);
+ if (vmwareGetVMStatus(driver, vm, &status, NULL) == -1)
+ goto cleanup;
- if (virDomainObjGetState(vm, NULL) != VIR_DOMAIN_RUNNING) {
+ if (status != VIR_DOMAIN_RUNNING) {
vmwareError(VIR_ERR_INTERNAL_ERROR, "%s",
_("domain is not in running state"));
goto cleanup;
@@ -582,6 +628,7 @@ vmwareDomainCreateWithFlags(virDomainPtr dom,
{
struct vmware_driver *driver = dom->conn->privateData;
virDomainObjPtr vm;
+ int status;
int ret = -1;
virCheckFlags(0, -1);
@@ -596,7 +643,10 @@ vmwareDomainCreateWithFlags(virDomainPtr dom,
goto cleanup;
}
- if (virDomainObjIsActive(vm)) {
+ if (vmwareGetVMStatus(driver, vm, &status, NULL) == -1)
+ goto cleanup;
+
+ if (status != VIR_DOMAIN_SHUTOFF) {
vmwareError(VIR_ERR_OPERATION_INVALID,
"%s", _("Domain is already running"));
goto cleanup;
@@ -623,6 +673,7 @@ vmwareDomainUndefineFlags(virDomainPtr dom,
{
struct vmware_driver *driver = dom->conn->privateData;
virDomainObjPtr vm;
+ int status;
int ret = -1;
virCheckFlags(0, -1);
@@ -645,7 +696,10 @@ vmwareDomainUndefineFlags(virDomainPtr dom,
goto cleanup;
}
- if (virDomainObjIsActive(vm)) {
+ if (vmwareGetVMStatus(driver, vm, &status, NULL) == -1)
+ goto cleanup;
+
+ if (status == VIR_DOMAIN_RUNNING) {
vm->persistent = 0;
} else {
virDomainRemoveInactive(&driver->domains, vm);
@@ -902,6 +956,7 @@ vmwareDomainGetInfo(virDomainPtr dom, virDomainInfoPtr info)
{
struct vmware_driver *driver = dom->conn->privateData;
virDomainObjPtr vm;
+ int state;
int ret = -1;
vmwareDriverLock(driver);
@@ -914,7 +969,10 @@ vmwareDomainGetInfo(virDomainPtr dom, virDomainInfoPtr info)
goto cleanup;
}
- info->state = virDomainObjGetState(vm, NULL);
+ if (vmwareGetVMStatus(driver, vm, &state, NULL) == -1)
+ goto cleanup;
+
+ info->state = state;
info->cpuTime = 0;
info->maxMem = vm->def->mem.max_balloon;
info->memory = vm->def->mem.cur_balloon;
@@ -949,8 +1007,7 @@ vmwareDomainGetState(virDomainPtr dom,
goto cleanup;
}
- *state = virDomainObjGetState(vm, reason);
- ret = 0;
+ ret = vmwareGetVMStatus(driver, vm, state, reason);
cleanup:
if (vm)
--
1.7.8.3
12 years, 2 months
