July 2011 - Devel - libvirt List Archives

[libvirt] [PATCH v2] rpc: Make the dispatch generator handle 'void name(void)' style procedures
by Matthias Bolte 21 Jul '11

21 Jul '11

The only 'void name(void)' style procedure in the protocol is 'close' that is handled special, but also programming errors like a missing _args or _ret suffix on the structs in the .x files can create such a situation by accident. Making the generator aware of this avoids bogus errors from the generator such as: Use of uninitialized value in exists at ./rpc/gendispatch.pl line 967. Also this allows to get rid of the -c option and the special case code for the 'close' procedure, as the generator handles it now correctly. Reported by Michal Privoznik --- v2: - remove the special handling of the 'close' procedure daemon/Makefile.am | 2 +- src/Makefile.am | 2 +- src/rpc/gendispatch.pl | 32 +++++++++++++++++--------------- 3 files changed, 19 insertions(+), 17 deletions(-) diff --git a/daemon/Makefile.am b/daemon/Makefile.am index 8ed29b8..63c731e 100644 --- a/daemon/Makefile.am +++ b/daemon/Makefile.am @@ -44,7 +44,7 @@ QEMU_PROTOCOL = $(top_srcdir)/src/remote/qemu_protocol.x $(srcdir)/remote_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \ $(REMOTE_PROTOCOL) - $(AM_V_GEN)perl -w $(srcdir)/../src/rpc/gendispatch.pl -c -b remote \ + $(AM_V_GEN)perl -w $(srcdir)/../src/rpc/gendispatch.pl -b remote \ $(REMOTE_PROTOCOL) > $@ $(srcdir)/qemu_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \ diff --git a/src/Makefile.am b/src/Makefile.am index fadde28..00e78ac 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -188,7 +188,7 @@ REMOTE_DRIVER_PROTOCOL = $(REMOTE_PROTOCOL) $(QEMU_PROTOCOL) $(srcdir)/remote/remote_client_bodies.h: $(srcdir)/rpc/gendispatch.pl \ $(REMOTE_PROTOCOL) $(AM_V_GEN)perl -w $(srcdir)/rpc/gendispatch.pl \ - -c -k remote $(REMOTE_PROTOCOL) > $@ + -k remote $(REMOTE_PROTOCOL) > $@ $(srcdir)/remote/qemu_client_bodies.h: $(srcdir)/rpc/gendispatch.pl \ $(QEMU_PROTOCOL) diff --git a/src/rpc/gendispatch.pl b/src/rpc/gendispatch.pl index e068b53..6e26e2d 100755 --- a/src/rpc/gendispatch.pl +++ b/src/rpc/gendispatch.pl @@ -9,7 +9,7 @@ # for both remote_protocol.x and qemu_protocol.x, you would run the # following: # -# gendispatch.pl -c -t remote ../src/remote/remote_protocol.x +# gendispatch.pl -t remote ../src/remote/remote_protocol.x # gendispatch.pl -t qemu ../src/remote/qemu_protocol.x # # By Richard Jones <rjones(a)redhat.com> @@ -20,8 +20,8 @@ use strict; use Getopt::Std; # Command line options. -our ($opt_p, $opt_t, $opt_a, $opt_r, $opt_d, $opt_c, $opt_b, $opt_k); -getopts ('ptardcbk'); +our ($opt_p, $opt_t, $opt_a, $opt_r, $opt_d, $opt_b, $opt_k); +getopts ('ptardbk'); my $structprefix = shift or die "missing prefix argument"; my $protocol = shift or die "missing protocol argument"; @@ -45,18 +45,6 @@ sub name_to_ProcName { # opinion about the name, args and return type of each RPC. my ($name, $ProcName, $id, $flags, %calls, @calls); -# only generate a close method if -c was passed -if ($opt_c) { - # REMOTE_PROC_CLOSE has no args or ret. - $calls{close} = { - name => "close", - ProcName => "Close", - UC_NAME => "CLOSE", - args => "void", - ret => "void", - }; -} - my $collect_args_members = 0; my $collect_ret_members = 0; my $last_name; @@ -143,6 +131,20 @@ while (<PROTOCOL>) { $flags = $3; $ProcName = name_to_ProcName ($name); + if (!exists $calls{$name}) { + # that the argument and return value cases have not yet added + # this procedure to the calls hash means that it has no arguments + # and no return value. add it to the calls hash now because all + # procedures have to be listed in the calls hash + $calls{$name} = { + name => $name, + ProcName => $ProcName, + UC_NAME => uc $name, + args => "void", + ret => "void" + } + } + if ($opt_b or $opt_k) { if (!($flags =~ m/^\s*\/\*\s*(\S+)\s+(\S+)\s*(.*)\*\/\s*$/)) { die "invalid generator flags for ${procprefix}_PROC_${name}" -- 1.7.4.1

2 2

[libvirt] [PATCH 00/13] New API: virDominDestroyWithFlags
by Michal Privoznik 21 Jul '11

21 Jul '11

This series creates new API which adds flags to virDomainDestroy. As mentioned here many times, it is a bad luck all APIs don't have flags parameter. Parameter for this might be needed to select different ways of destroying a domain. For example, qemu has 'quit' command, which force it to flush internal caches a thus preventing from data loss. Or vice versa - in cases where we are doing hypervisor assisted destroy we might want to send signals, because hypervisor is not responding. Currently, no new functionality is implemented, but this paves the way for creating multiple ways of domain destroying. Therefore, calling this new API is the same as calling its predecessor. Michal Privoznik (13): destroy: Define new public API virDomainDestroyWithFlags destroy: Wire up the remote protocol destroy: Implement internal API for qemu driver destroy: Implement internal API for ESX driver destroy: Implement internal API for libxl driver destroy: Implement internal API for lxc driver destroy: Implement internal API for openvz driver destroy: Implement internal API for phyp driver destroy: Implement internal API for uml driver destroy: Implement internal API for vbox driver destroy: Implement internal API for vmware driver destroy: Implement internal API for xen driver destroy: Implement internal API for xenapi driver include/libvirt/libvirt.h.in | 7 +++++ src/driver.h | 4 +++ src/esx/esx_driver.c | 12 +++++++++- src/libvirt.c | 52 ++++++++++++++++++++++++++++++++++++++++++ src/libvirt_public.syms | 1 + src/libxl/libxl_driver.c | 12 +++++++++- src/lxc/lxc_driver.c | 23 +++++++++++++++++- src/openvz/openvz_driver.c | 13 +++++++++- src/phyp/phyp_driver.c | 12 +++++++++- src/qemu/qemu_driver.c | 13 +++++++++- src/remote/remote_driver.c | 1 + src/remote/remote_protocol.x | 8 +++++- src/remote_protocol-structs | 5 ++++ src/uml/uml_driver.c | 14 ++++++++++- src/vbox/vbox_tmpl.c | 14 ++++++++++- src/vmware/vmware_driver.c | 12 +++++++++- src/xen/xen_driver.c | 28 ++++++++++++++++++++++ src/xen/xen_driver.h | 1 + src/xen/xen_hypervisor.c | 24 +++++++++++++++++- src/xen/xen_hypervisor.h | 3 ++ src/xen/xen_inotify.c | 1 + src/xen/xend_internal.c | 24 +++++++++++++++++- src/xen/xm_internal.c | 1 + src/xen/xs_internal.c | 1 + src/xenapi/xenapi_driver.c | 22 ++++++++++++++++- 25 files changed, 291 insertions(+), 17 deletions(-) -- 1.7.5.rc3

3 19

[libvirt] [PATCH] error: preserve errno when saving last error
by Eric Blake 21 Jul '11

21 Jul '11

It is common to see the sequence: virErrorPtr save_err = virSaveLastError(); // do cleanup virSetError(save_err); virFreeError(save_err); on cleanup paths. But for functions where it is desirable to return the errno that caused failure, this sequence can clobber that errno. virFreeError was already safe; this makes the other two functions in the sequence safe as well, assuming all goes well (on OOM, errno will be clobbered, but then again, save_err won't reflect the real error that happened, so you are no longer preserving the real situation - that's life with OOM). * src/util/virterror.c (virSaveLastError, virSetError): Preserve errno. --- Fixes an errno-clobbering situation pointed out here: https://www.redhat.com/archives/libvir-list/2011-July/msg01382.html src/util/virterror.c | 17 +++++++++++++---- 1 files changed, 13 insertions(+), 4 deletions(-) diff --git a/src/util/virterror.c b/src/util/virterror.c index 0c7698a..07f8b45 100644 --- a/src/util/virterror.c +++ b/src/util/virterror.c @@ -295,18 +295,24 @@ virGetLastError(void) * Can be used to re-set an old error, which may have been squashed by * other functions (like cleanup routines). * - * Returns 0 on success, 1 on failure + * Returns 0 on success, -1 on failure. Leaves errno unchanged. */ int virSetError(virErrorPtr newerr) { virErrorPtr err; + int saved_errno = errno; + int ret = -1; + err = virLastErrorObject(); if (!err) - return -1; + goto cleanup; virResetError(err); - return virCopyError(newerr, err); + ret = virCopyError(newerr, err); +cleanup: + errno = saved_errno; + return ret; } /** @@ -339,7 +345,8 @@ virCopyLastError(virErrorPtr to) /** * virSaveLastError: * - * Save the last error into a new error object. + * Save the last error into a new error object. On success, errno is + * unchanged; on failure, errno is ENOMEM. * * Returns a pointer to the copied error or NULL if allocation failed. * It is the caller's responsibility to free the error with @@ -349,11 +356,13 @@ virErrorPtr virSaveLastError(void) { virErrorPtr to; + int saved_errno = errno; if (VIR_ALLOC(to) < 0) return NULL; virCopyLastError(to); + errno = saved_errno; return to; } -- 1.7.4.4

2 2

[libvirt] [PATCH] python: Fix makefile rule for code generation
by Matthias Bolte 21 Jul '11

21 Jul '11

Commit 8665f85523f0451c changed generated.stamp to $(GENERATE).stamp, but missed one instance in the CLEANFILES list. This can break the build in case the generated code is deleted but the .stamp file stays around and therefore the code isn't regenerated. --- python/Makefile.am | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/python/Makefile.am b/python/Makefile.am index a4c9a6b..51f005d 100644 --- a/python/Makefile.am +++ b/python/Makefile.am @@ -71,7 +71,7 @@ install-data-local: uninstall-local: rm -f $(DESTDIR)$(pyexecdir)/libvirt.py -CLEANFILES= $(GENERATED) generated.stamp +CLEANFILES= $(GENERATED) $(GENERATE).stamp else all: -- 1.7.4.1

2 2

[libvirt] [PATCH v2 0/7] Add support for setting QoS
by Michal Privoznik 21 Jul '11

21 Jul '11

This patch series add support for setting traffic shaping and policing on both domain's interface and network's virtual bridge. Basically, this is done via 'tc' from iproute2 package. For shaping is HTB used, for policing we need u32 match selector. Both should be available in RHEL-6 kernel. How this works: On an virtual interface which has limits defined a root qdisc are replaced. Ingress root for outbound traffic shaping and egress for inbound. Basically, in inbound traffic policing is applied, on outbound shaping. New qdiscs are set to limit the traffic to rate set in XML. For shaping it is possible to set the size of buffer. Accepted values for rate, peak and burst have same format as 'tc' command and are documented. Supported devices are VIR_DOMAIN_NET_TYPE_NETWORK, VIR_DOMAIN_NET_TYPE_BRIDGE and VIR_DOMAIN_NET_TYPE_DIRECT. diff to v1: -rebase to current HEAD -add support for macvtap devices Michal Privoznik (7): bandwidth: Define schema and create documentation bandwidth: Declare internal structures bandwidth: Add format parsing functions bandwidth: Create format functions bandwitdh: Implement functions to enable and disable QoS bandwidth: Add test cases for network bandwidth: Add domain schema test suite configure.ac | 4 + docs/formatdomain.html.in | 32 ++ docs/formatnetwork.html.in | 30 ++ docs/schemas/domain.rng | 50 +++ docs/schemas/network.rng | 50 +++ src/conf/domain_conf.c | 6 + src/conf/domain_conf.h | 1 + src/conf/network_conf.c | 8 + src/conf/network_conf.h | 1 + src/libvirt_private.syms | 6 + src/network/bridge_driver.c | 12 + src/qemu/qemu_command.c | 10 +- src/util/macvtap.c | 12 +- src/util/macvtap.h | 5 +- src/util/network.c | 517 +++++++++++++++++++++++++ src/util/network.h | 28 ++ tests/domainschemadata/domain-bandwidth.xml | 72 ++++ tests/networkxml2xmlin/bandwidth-network.xml | 16 + tests/networkxml2xmlout/bandwidth-network.xml | 16 + tests/networkxml2xmltest.c | 1 + 20 files changed, 873 insertions(+), 4 deletions(-) create mode 100644 tests/domainschemadata/domain-bandwidth.xml create mode 100644 tests/networkxml2xmlin/bandwidth-network.xml create mode 100644 tests/networkxml2xmlout/bandwidth-network.xml -- 1.7.5.rc3

6 19

[libvirt] [PATCH 0/7] Add support for setting QoS
by Michal Privoznik 21 Jul '11

21 Jul '11

This patch series add support for setting traffic shaping and policing on both domain's interface and network's virtual bridge. Basically, this is done via 'tc' from iproute2 package. For shaping is HTB used, for policing we need u32 match selector. Both should be available in RHEL-6 kernel. How this works: On an virtual interface which has limits defined a root qdisc are replaced. Ingress root for outbound traffic shaping and egress for inbound. Basically, in inbound traffic policing is applied, on outbound shaping. New qdiscs are set to limit the traffic to rate set in XML. For shaping it is possible to set the size of buffer. Accepted values for rate, peak and burst are integer numbers. Units are kilobytes per second for rate or kilobytes for size. Supported devices are VIR_DOMAIN_NET_TYPE_NETWORK, VIR_DOMAIN_NET_TYPE_BRIDGE and VIR_DOMAIN_NET_TYPE_DIRECT. diff to v2: -Jirka's review included diff to v1: -rebase to current HEAD -add support for macvtap devices Michal Privoznik (7): bandwidth: Define schema and create documentation bandwidth: Declare internal structures bandwidth: Add parsing functions bandwidth: Create format functions bandwitdh: Implement functions to enable and disable QoS bandwidth: Add test cases for network bandwidth: Add domain schema test suite configure.ac | 4 + docs/formatdomain.html.in | 33 +++ docs/formatnetwork.html.in | 30 +++ docs/schemas/bandwidth.rng | 52 ++++ docs/schemas/domain.rng | 4 + docs/schemas/network.rng | 4 + src/conf/domain_conf.c | 6 + src/conf/domain_conf.h | 1 + src/conf/network_conf.c | 8 + src/conf/network_conf.h | 1 + src/libvirt_private.syms | 4 + src/network/bridge_driver.c | 12 + src/qemu/qemu_command.c | 10 +- src/util/macvtap.c | 12 +- src/util/macvtap.h | 5 +- src/util/network.c | 345 +++++++++++++++++++++++++ src/util/network.h | 23 ++ tests/domainschemadata/domain-bandwidth.xml | 72 +++++ tests/networkxml2xmlin/bandwidth-network.xml | 16 ++ tests/networkxml2xmlout/bandwidth-network.xml | 16 ++ tests/networkxml2xmltest.c | 1 + 21 files changed, 655 insertions(+), 4 deletions(-) create mode 100644 docs/schemas/bandwidth.rng create mode 100644 tests/domainschemadata/domain-bandwidth.xml create mode 100644 tests/networkxml2xmlin/bandwidth-network.xml create mode 100644 tests/networkxml2xmlout/bandwidth-network.xml -- 1.7.5.rc3

5 24

[libvirt] Schedule for release of 0.9.4
by Daniel Veillard 21 Jul '11

21 Jul '11

I should have posted this beginning of this week... Basically I would like to freeze for 0.9.4 next Monday, which means we need to finish ACK'ing and pushing the number of patch sets which are well advanced already. Then try to get a final 0.9.4 release on Aug 1 or 2. So let's make sure we have updated patches on the list and let's review the patches and apply them ! This includes: - virtual switch support - support for cpu bandwith (Wen can you provide a patchset including latest feedback ?) - New virDomainBlockPull API (Adam can you provide a new patchset too ?) - and various other patch(set)s floating around And if you sent a patch which got no feedback, please raise it again, thanks everybody ! Daniel -- Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/ http://veillard.com/ | virtualization library http://libvirt.org/

2 2

[libvirt] [PATCH] maint: fix typos on guaranteed
by Eric Blake 21 Jul '11

21 Jul '11

* src/conf/domain_event.c (virDomainEventDispatch): Fix typo. * src/internal.h (ATTRIBUTE_FMT_PRINTF): Likewise. * src/libvirt.c (virStreamEventUpdateCallback): Likewise. * src/remote/remote_driver.c (doRemoteOpen): Likewise. * src/storage/storage_backend_fs.c (virStorageBackendProbeTarget): Likewise. * src/util/virterror.c (virConnCopyLastError, virCopyLastError): Likewise. * src/xen/xend_internal.h (xend_wait_for_devices): Likewise. --- Pushing under the trivial rule. src/conf/domain_event.c | 2 +- src/internal.h | 2 +- src/libvirt.c | 2 +- src/remote/remote_driver.c | 2 +- src/storage/storage_backend_fs.c | 2 +- src/util/virterror.c | 4 ++-- src/xen/xend_internal.h | 2 +- 7 files changed, 8 insertions(+), 8 deletions(-) diff --git a/src/conf/domain_event.c b/src/conf/domain_event.c index c435484..d43331f 100644 --- a/src/conf/domain_event.c +++ b/src/conf/domain_event.c @@ -1069,7 +1069,7 @@ void virDomainEventDispatch(virDomainEventPtr event, { int i; /* Cache this now, since we may be dropping the lock, - and have more callbacks added. We're guarenteed not + and have more callbacks added. We're guaranteed not to have any removed */ int cbCount = callbacks->count; diff --git a/src/internal.h b/src/internal.h index 5747a90..1997031 100644 --- a/src/internal.h +++ b/src/internal.h @@ -140,7 +140,7 @@ * Macro used to check printf like functions, if compiling * with gcc. * - * We use gnulib which guarentees we always have GNU style + * We use gnulib which guarantees we always have GNU style * printf format specifiers even on broken Win32 platforms * hence we have to force 'gnu_printf' for new GCC */ diff --git a/src/libvirt.c b/src/libvirt.c index 2f5241a..16a9a02 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -13390,7 +13390,7 @@ error: * Changes the set of events to monitor for a stream. This allows * for event notification to be changed without having to * unregister & register the callback completely. This method - * is guarenteed to succeed if a callback is already registered + * is guaranteed to succeed if a callback is already registered * * Returns 0 on success, -1 if no callback is registered */ diff --git a/src/remote/remote_driver.c b/src/remote/remote_driver.c index 6ba58ed..82b938c 100644 --- a/src/remote/remote_driver.c +++ b/src/remote/remote_driver.c @@ -584,7 +584,7 @@ doRemoteOpen (virConnectPtr conn, if (!(priv->client = virNetClientNewExternal(cmd_argv))) goto failed; - /* Do not set 'is_secure' flag since we can't guarentee + /* Do not set 'is_secure' flag since we can't guarantee * an external program is secure, and this flag must be * pessimistic */ } break; diff --git a/src/storage/storage_backend_fs.c b/src/storage/storage_backend_fs.c index 8d6f76d..1656215 100644 --- a/src/storage/storage_backend_fs.c +++ b/src/storage/storage_backend_fs.c @@ -143,7 +143,7 @@ virStorageBackendProbeTarget(virStorageVolTargetPtr target, } /* XXX ideally we'd fill in secret UUID here - * but we cannot guarentee 'conn' is non-NULL + * but we cannot guarantee 'conn' is non-NULL * at this point in time :-( So we only fill * in secrets when someone first queries a vol */ diff --git a/src/util/virterror.c b/src/util/virterror.c index 75058f3..0c7698a 100644 --- a/src/util/virterror.c +++ b/src/util/virterror.c @@ -327,7 +327,7 @@ int virCopyLastError(virErrorPtr to) { virErrorPtr err = virLastErrorObject(); - /* We can't guarentee caller has initialized it to zero */ + /* We can't guarantee caller has initialized it to zero */ memset(to, 0, sizeof(*to)); if (err) virCopyError(err, to); @@ -464,7 +464,7 @@ virConnGetLastError(virConnectPtr conn) int virConnCopyLastError(virConnectPtr conn, virErrorPtr to) { - /* We can't guarentee caller has initialized it to zero */ + /* We can't guarantee caller has initialized it to zero */ memset(to, 0, sizeof(*to)); if (conn == NULL) diff --git a/src/xen/xend_internal.h b/src/xen/xend_internal.h index c4ed9ba..4a0cd69 100644 --- a/src/xen/xend_internal.h +++ b/src/xen/xend_internal.h @@ -36,7 +36,7 @@ xenDaemonOpen_unix(virConnectPtr conn, const char *path); * \return 0 for success; -1 (with errno) on error * * xen_create() returns after a domain has been allocated including - * its memory. This does not guarentee, though, that the devices + * its memory. This does not guarantee, though, that the devices * have come up properly. For instance, if you create a VBD with an * invalid filename, the error won't occur until after this function * returns. -- 1.7.4.4

1 0

[libvirt] [PATCH] rpc: Pass through DISPLAY so ssh can launch askpass
by Cole Robinson 20 Jul '11

20 Jul '11

Though we prefer users to have SSH keys setup, virt-manager users still depend on remote SSH connections to launch a password dialog. This fixes launch ssh-askpass Fix suggested by danpb --- src/rpc/virnetsocket.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/src/rpc/virnetsocket.c b/src/rpc/virnetsocket.c index 4403fc4..6605aa3 100644 --- a/src/rpc/virnetsocket.c +++ b/src/rpc/virnetsocket.c @@ -604,6 +604,7 @@ int virNetSocketNewConnectSSH(const char *nodename, virCommandAddEnvPassCommon(cmd); virCommandAddEnvPass(cmd, "SSH_AUTH_SOCK"); virCommandAddEnvPass(cmd, "SSH_ASKPASS"); + virCommandAddEnvPass(cmd, "DISPLAY"); virCommandClearCaps(cmd); if (service) -- 1.7.4.4

3 3

[libvirt] remote driver RPC API usage breaks launching ssh askpass
by Cole Robinson 20 Jul '11

20 Jul '11

This commit broke launching SSH askpass from virt-manager: http://libvirt.org/git/?p=libvirt.git;a=commit;h=c1b226447781ba8367606f760d… Using upstream virt-manager, running python src/virt-manager.py and trying to connect to a remote SSH connection without SSH keys causes a segfault: #0 virNetSocketRead (sock=0xc, buf=0x7f746c006458 "", len=4) at rpc/virnetsocket.c:969 #1 0x00007f7477ea7374 in virNetClientIOReadMessage (client=0x7f746c006400) at rpc/virnetclient.c:712 #2 virNetClientIOHandleInput (client=0x7f746c006400) at rpc/virnetclient.c:731 #3 0x00007f7477ea7ae0 in virNetClientIncomingEvent (sock=0x7f746c002040, events=<value optimized out>, opaque=0x7f746c006400) at rpc/virnetclient.c:1120 #4 0x00007f74782332ce in libvirt_virEventInvokeHandleCallback ( self=<value optimized out>, args=<value optimized out>) at libvirt-override.c:2997 #5 0x0000003075ee965b in call_function (f=<value optimized out>, throwflag=<value optimized out>) at /usr/src/debug/Python-2.7/Python/ceval.c:4071 #6 PyEval_EvalFrameEx (f=<value optimized out>, throwflag=<value optimized out>) at /usr/src/debug/Python-2.7/Python/ceval.c:2721 ... If you apply the following patch to virt-manager: $ cat a diff --git a/src/virt-manager.py.in b/src/virt-manager.py.in index cf0a20e..4d3f1c6 100755 --- a/src/virt-manager.py.in +++ b/src/virt-manager.py.in @@ -357,8 +357,8 @@ def main(): "disabling DBus service") # Hook libvirt events into glib main loop - import virtManager.libvirtglib - virtManager.libvirtglib.register_event_impl() + #import virtManager.libvirtglib + #virtManager.libvirtglib.register_event_impl() # At this point we're either starting a brand new controlling instance, # or the dbus comms to existing instance has failed rerun make, and reproduce the error, libvirt raises an exception from virConnectOpenAuth: libvirtError: Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password). : Connection reset by peer I haven't poked at it yet, putting it here incase anyone else has ideas. - Cole

2 2