June 2011 - Devel - libvirt List Archives

[libvirt] [PATCH 1/4] vcpupin: improve vcpupin definition of virsh vcpupin
by Taku Izumi 09 Jun '11

09 Jun '11

When using vcpupin command, we have to speficy comma-separated list as cpulist, but this is tedious in case the number of phsycal cpus is large. This patch improves this by introducing special markup "-" and "^" which are similar to XML schema of "cpuset" attribute. That is: # virsh vcpupin Guest 0 0-15,^8 is identical to # virsh vcpupin Guest 0 0,1,2,3,4,5,6,7,9,10,11,12,13,14,15 NOTE: The expression is sequencially evaluated, so "0-15,^8" is not identical to "^8,0-15". Signed-off-by: Taku Izumi <izumi.taku(a)jp.fujitsu.com> --- tools/virsh.c | 125 +++++++++++++++++++++++++++++++------------------------- tools/virsh.pod | 4 + 2 files changed, 73 insertions(+), 56 deletions(-) Index: libvirt/tools/virsh.c =================================================================== --- libvirt.orig/tools/virsh.c +++ libvirt/tools/virsh.c @@ -2946,8 +2946,9 @@ cmdVcpupin(vshControl *ctl, const vshCmd bool ret = true; unsigned char *cpumap; int cpumaplen; - int i; - enum { expect_num, expect_num_or_comma } state; + int i, cpu, lastcpu, maxcpu; + bool unuse = false; + char *cur; int config = vshCommandOptBool(cmd, "config"); int live = vshCommandOptBool(cmd, "live"); int current = vshCommandOptBool(cmd, "current"); @@ -3003,66 +3004,74 @@ cmdVcpupin(vshControl *ctl, const vshCmd return false; } - /* Check that the cpulist parameter is a comma-separated list of - * numbers and give an intelligent error message if not. - */ - if (cpulist[0] == '\0') { - vshError(ctl, "%s", _("cpulist: Invalid format. Empty string.")); - virDomainFree (dom); - return false; - } + maxcpu = VIR_NODEINFO_MAXCPUS(nodeinfo); + cpumaplen = VIR_CPU_MAPLEN(maxcpu); + cpumap = vshCalloc(ctl, 0, cpumaplen); + + /* Parse cpulist */ + cur = cpulist; + if (*cur == 0) + goto parse_error; + + while (*cur != 0) { + + /* the char '^' denotes exclusive */ + if (*cur == '^') { + cur++; + unuse = true; + } + + /* parse physical CPU number */ + if (!c_isdigit(*cur)) + goto parse_error; + cpu = virParseNumber(&cur); + if (cpu < 0) { + goto parse_error; + } + if (cpu >= maxcpu) { + vshError(ctl, _("Physical CPU %d doesn't exist."), cpu); + goto parse_error; + } + virSkipSpaces(&cur); - state = expect_num; - for (i = 0; cpulist[i]; i++) { - switch (state) { - case expect_num: - if (!c_isdigit (cpulist[i])) { - vshError(ctl, _("cpulist: %s: Invalid format. Expecting " - "digit at position %d (near '%c')."), - cpulist, i, cpulist[i]); - virDomainFree (dom); - return false; + if ((*cur == ',') || (*cur == 0)) { + if (unuse) { + VIR_UNUSE_CPU(cpumap, cpu); + } else { + VIR_USE_CPU(cpumap, cpu); } - state = expect_num_or_comma; - break; - case expect_num_or_comma: - if (cpulist[i] == ',') - state = expect_num; - else if (!c_isdigit (cpulist[i])) { - vshError(ctl, _("cpulist: %s: Invalid format. Expecting " - "digit or comma at position %d (near '%c')."), - cpulist, i, cpulist[i]); - virDomainFree (dom); - return false; + } else if (*cur == '-') { + /* the char '-' denotes range */ + if (unuse) { + goto parse_error; + } + cur++; + virSkipSpaces(&cur); + /* parse the end of range */ + lastcpu = virParseNumber(&cur); + if (lastcpu < cpu) { + goto parse_error; + } + if (lastcpu >= maxcpu) { + vshError(ctl, _("Physical CPU %d doesn't exist."), maxcpu); + goto parse_error; + } + for (i = cpu; i <= lastcpu; i++) { + VIR_USE_CPU(cpumap, i); } + virSkipSpaces(&cur); } - } - if (state == expect_num) { - vshError(ctl, _("cpulist: %s: Invalid format. Trailing comma " - "at position %d."), - cpulist, i); - virDomainFree (dom); - return false; - } - cpumaplen = VIR_CPU_MAPLEN(VIR_NODEINFO_MAXCPUS(nodeinfo)); - cpumap = vshCalloc(ctl, 1, cpumaplen); - - do { - unsigned int cpu = atoi(cpulist); - - if (cpu < VIR_NODEINFO_MAXCPUS(nodeinfo)) { - VIR_USE_CPU(cpumap, cpu); + if (*cur == ',') { + cur++; + virSkipSpaces(&cur); + unuse = false; + } else if (*cur == 0) { + break; } else { - vshError(ctl, _("Physical CPU %d doesn't exist."), cpu); - VIR_FREE(cpumap); - virDomainFree(dom); - return false; + goto parse_error; } - cpulist = strchr(cpulist, ','); - if (cpulist) - cpulist++; - } while (cpulist); + } if (flags == -1) { if (virDomainPinVcpu(dom, vcpu, cpumap, cpumaplen) != 0) { @@ -3074,9 +3083,15 @@ cmdVcpupin(vshControl *ctl, const vshCmd } } +cleanup: VIR_FREE(cpumap); virDomainFree(dom); return ret; + +parse_error: + vshError(ctl, "%s", _("cpulist: Invalid format.")); + ret = false; + goto cleanup; } /* Index: libvirt/tools/virsh.pod =================================================================== --- libvirt.orig/tools/virsh.pod +++ libvirt/tools/virsh.pod @@ -794,7 +794,9 @@ vCPUs, the running time, the affinity to I<--current> Pin domain VCPUs to host physical CPUs. The I<vcpu> number must be provided -and I<cpulist> is a comma separated list of physical CPU numbers. +and I<cpulist> is a list of physical CPU numbers. Its syntax is a comma +separated list and a special markup using '-' and '^' (ex. '0-4', '0-3,^2') can +also be allowed. The '-' denotes the range and the '^' denotes exclusive. If I<--live> is specified, affect a running guest. If I<--config> is specified, affect the next boot of a persistent guest. If I<--current> is specified, affect the current guest state.

1 0

[libvirt] [PATCH 0/4] RFC: vcpupin: some improvements of virsh vcpupin command
by Taku Izumi 08 Jun '11

08 Jun '11

Hi all, This patchset improves virsh vcpupin command like the following: (i) introduce special markup "-" and "^" which are similar to XML schema of "cpuset" attribute # virsh vcpupin VM 0 0-8,^4 --config # virsh dumpxml VM ... <vcpu>4</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0-3,5-8'/> </cputune> ... (ii) allow to receive the special keyword 'r' as a cpulist parameter when resetting vcpupin setting. # virsh vcpupin VM 0 r --config (iii) when resetting, that is, pinning the specified virtual cpu to all host physical cpus, vcpupin setting will be deleted # virsh dumpxml VM ... <vcpu>4</vcpu> <cputune> </cputune> ... The following my patchset is the prerequisite of this: http://www.redhat.com/archives/libvir-list/2011-June/msg00390.html *[PATCH 1/4] vcpupin: improve vcpupin definition of virsh vcpupin *[PATCH 2/4] vcpupin: add reset option to virsh vcpupin command *[PATCH 3/4] vcpupin: add virDomainVcpupinDel function *[PATCH 4/4] vcpupin: add vcpupin resetting feature to qemu driver Best regards, Taku Izumi

1 0

[libvirt] [PATCH v4 0/4] vcpupin: configure inactive domain's CPU affinity setting
by Taku Izumi 08 Jun '11

08 Jun '11

Hi all, This patchset enables us to configure inactive domains' CPU affinity setting. This is the rebased version, but retains the version number. *[PATCH v4 1/4] vcpupin: introduce a new libvirt API (virDomainPinVcpuFlags) *[PATCH v4 2/4] vcpupin: implement the code to address the new API in the qemu driver *[PATCH v4 3/4] vcpupin: implement the remote protocol to address the new API *[PATCH v4 4/4] vcpupin: add the new option to "virsh vcpupin" command Best regards, Taku Izumi

1 0

[libvirt] Driver development
by Carlos N. A. Corrêa 08 Jun '11

08 Jun '11

Hi, I'm interested in developing a new network driver for libvirt (one for the definition and management of OpenVSwitch datapaths). I've read some of the code already, and by now my general directions are: - Change the function virNetworkDefParseXML in src/conf/network_conf.c to define and parse new configuration directives needed by my driver - Use src/network/bridge_driver.c as a template for my new driver, replacing code from the services provided by the driver (listed on "virNetworkDriver" type) with my own code, for my own net type. Have you any other directions in this matter? Any tips? If it works, would be this code of any use to you? Best regards, Carlos "Bill" Nilton CISSP, RHCE, ITIL Foundations http://carlosnilton.com.br/

2 2

[libvirt] [RFC PATCH] Set and reset MAC for PASSTHROUGH mode
by D. Herrendoerfer 08 Jun '11

08 Jun '11

Hi to all, there is a problem present in libvirt that when a PASSTHROUGH mode DIRECT NIC connection is made the MAC address of the NIC is not automatically set and reset to the configured VM MAC and back again. The attached patch fixes this problem by setting and resetting the MAC while remembering the previous setting while the VM is running. This also works if libvirtd is restarted while the VM is running. The storing of the previous MAC address is done in a link ( currently in /tmp, but should probably go into /var/run somewhere ). Why a link ? It only uses one inode, no need to waste a whole data block for 16 bytes or less. It's also more readable by simply looking at it with 'ls -l'. Best regards Dirk Signed-off-by: Dirk Herrendoerfer <d.herrendoerfer at herrendoerfer.name> diff --git a/src/libvirt_macvtap.syms b/src/libvirt_macvtap.syms index b48565b..0520cb5 100644 --- a/src/libvirt_macvtap.syms +++ b/src/libvirt_macvtap.syms @@ -6,5 +6,7 @@ # macvtap.h delMacvtap; openMacvtapTap; +get_macaddr; +set_macaddr; vpAssociatePortProfileId; vpDisassociatePortProfileId; diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index ef2d002..4cddbba 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -118,6 +118,7 @@ qemuPhysIfaceConnect(virDomainDefPtr def, int rc; #if WITH_MACVTAP char *res_ifname = NULL; + unsigned char old_macaddr[6]; int vnet_hdr = 0; int err; @@ -125,6 +126,53 @@ qemuPhysIfaceConnect(virDomainDefPtr def, net->model && STREQ(net->model, "virtio")) vnet_hdr = 1; + /** Note: When using PASSTHROUGH mode with MACVTAP devices the link + * devices's MAC address must be set to the VMs MAC address. In + * order to not confuse the first switch or bridge in line this MAC + * address must be reset when the VM is shut down. + * This is especially important when using SRIOV capable cards that + * emulate their switch in firmware. + */ + if ( net->data.direct.mode == VIR_DOMAIN_NETDEV_MACVTAP_MODE_PASSTHRU ) { + rc = get_macaddr(&old_macaddr, 6, net->data.direct.linkdev); + if (rc) { + virReportSystemError(rc, + _("Getting MAC address from '%s' " + "to '%02x:%02x:%02x:%02x:%02x:%02x' failed."), + net->data.direct.linkdev, + old_macaddr[0],old_macaddr[1],old_macaddr[2], + old_macaddr[3],old_macaddr[4],old_macaddr[5]); + } else { + char oldmacname[256], newmacname[256]; + + sprintf(oldmacname,"%02x:%02x:%02x:%02x:%02x:%02x", + old_macaddr[0],old_macaddr[1],old_macaddr[2], + old_macaddr[3],old_macaddr[4],old_macaddr[5]); + + sprintf(newmacname,"/tmp/%s@%02x:%02x:%02x:%02x:%02x:%02x", + net->data.direct.linkdev, + net->mac[0],net->mac[1],net->mac[2], + net->mac[3],net->mac[4],net->mac[5]); + + rc = symlink (oldmacname, newmacname); + if (rc) { + virReportSystemError(rc, + _("MAC link file creation failed for %s."), + net->data.direct.linkdev); + } + } + + rc = set_macaddr(net->mac, 6, net->data.direct.linkdev); + if (rc) { + virReportSystemError(rc, + _("Setting MAC address on '%s' to " + "'%02x:%02x:%02x:%02x:%02x:%02x' failed."), + net->data.direct.linkdev, + net->mac[0],net->mac[1],net->mac[2], + net->mac[3],net->mac[4],net->mac[5]); + } + } + rc = openMacvtapTap(net->ifname, net->mac, net- >data.direct.linkdev, net->data.direct.mode, vnet_hdr, def->uuid, &net->data.direct.virtPortProfile, &res_ifname, diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 1efe024..127acb8 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -2663,6 +2663,51 @@ void qemuProcessStop(struct qemud_driver *driver, if (net->type == VIR_DOMAIN_NET_TYPE_DIRECT) { delMacvtap(net->ifname, net->mac, net- >data.direct.linkdev, &net->data.direct.virtPortProfile); + + if ( net->data.direct.mode == VIR_DOMAIN_NETDEV_MACVTAP_MODE_PASSTHRU ) { + char newmacname[256], linkdata[64]; + unsigned int old_macaddr[6]; + + sprintf(newmacname,"/tmp/%s@%02x:%02x:%02x:%02x:%02x: %02x", + net->data.direct.linkdev, + net->mac[0],net->mac[1],net->mac[2], + net->mac[3],net->mac[4],net->mac[5]); + + ret = readlink (newmacname, linkdata, 64); + if ( ret == 17 ) { + linkdata[17] = 0; + + ret = sscanf(linkdata,"%x:%x:%x:%x:%x:%x", + &old_macaddr[0],&old_macaddr[1],&old_macaddr[2], + &old_macaddr[3],&old_macaddr[4],&old_macaddr[5]); + if ( ret == 6 ) { + unsigned char oldmac[6]; + oldmac[0] = (unsigned char)(old_macaddr[0] & 0xFF) ; + oldmac[1] = (unsigned char)(old_macaddr[1] & 0xFF) ; + oldmac[2] = (unsigned char)(old_macaddr[2] & 0xFF) ; + oldmac[3] = (unsigned char)(old_macaddr[3] & 0xFF) ; + oldmac[4] = (unsigned char)(old_macaddr[4] & 0xFF) ; + oldmac[5] = (unsigned char)(old_macaddr[5] & 0xFF) ; + + VIR_WARN(("Resetting MAC address on '%s' " + "to '%02x:%02x:%02x:%02x:%02x: %02x'."), + net->data.direct.linkdev, + oldmac[0],oldmac[1],oldmac[2], + oldmac[3],oldmac[4],oldmac[5]); + /*reset mac and remove link file-ignore restults*/ + ret = set_macaddr(oldmac, 6, net- >data.direct.linkdev); + ret = unlink(newmacname); + } else { + VIR_WARN(("Scanning MAC address from '%s' " + "failed ! Got %i values."), + linkdata, ret); + } + } else { + VIR_WARN(("Reading MAC address from '%s' failed ! " + "Got %i bytes."), + newmacname, ret); + } + } VIR_FREE(net->ifname); } } diff --git a/src/util/macvtap.c b/src/util/macvtap.c index 068638e..1026a84 100644 --- a/src/util/macvtap.c +++ b/src/util/macvtap.c @@ -191,6 +191,155 @@ err_exit: # if WITH_MACVTAP +/** + * get_macaddr: + * Get the MAC address of a network device + * + * @macaddress: Pointer where the MAC address will be stored + * @macaddrsize: Size of the MAC address. + * @srcdev: The interface name of the NIC to get the MAC from + * + * Returns zero in case of success, + * negative value otherwise with error reported. + * + */ +int +get_macaddr(const unsigned char *macaddress, int macaddrsize, + const char *srcdev ) +{ + int sockfd; + int io; + char buffer[1024]; + struct ifreq ifr; + + strcpy(ifr.ifr_name, srcdev); + + sockfd = socket(AF_INET, SOCK_STREAM, 0); + if(sockfd < 0){ + return -1; + } + + io = ioctl(sockfd, SIOCGIFHWADDR, (char *)&ifr); + if(io < 0){ + return -1; + } + + bcopy( ifr.ifr_ifru.ifru_hwaddr.sa_data, macaddress, macaddrsize); + + return 0; +} + +/** + * Set_macaddr: + * Set the MAC address of a network device + * + * @macaddress: MAC address to assign to the NIC + * @macaddrsize: Size of the MAC address. + * @srcdev: The interface name of the NIC + * + * Returns zero in case of success, + * negative value otherwise with error reported. + * + */ +int +set_macaddr(const unsigned char *macaddress, int macaddrsize, + const char *srcdev ) +{ + int rc = 0; + struct nlmsghdr *resp; + struct nlmsgerr *err; + struct ifinfomsg ifinfo = { .ifi_family = AF_UNSPEC }; + int ifindex; + unsigned char *recvbuf = NULL; + unsigned int recvbuflen; + struct nl_msg *nl_msg; + struct nlattr *linkinfo; + + if (ifaceGetIndex(true, srcdev, &ifindex) != 0) + return -1; + + nl_msg = nlmsg_alloc_simple(RTM_SETLINK, NLM_F_REQUEST); + + if (!nl_msg) { + virReportOOMError(); + return -1; + } + + if (nlmsg_append(nl_msg, &ifinfo, sizeof(ifinfo), NLMSG_ALIGNTO) < 0) + goto buffer_too_small; + + if (nla_put_u32(nl_msg, IFLA_LINK, ifindex) < 0) + goto buffer_too_small; + + if (nla_put(nl_msg, IFLA_ADDRESS, macaddrsize, macaddress) < 0) + goto buffer_too_small; + + if (srcdev && + nla_put(nl_msg, IFLA_IFNAME, strlen(srcdev)+1, srcdev) < 0) + goto buffer_too_small; + + if (nlComm(nl_msg, &recvbuf, &recvbuflen, 0) < 0) { + rc = -1; + goto err_exit; + } + + if (recvbuflen < NLMSG_LENGTH(0) || recvbuf == NULL) + goto malformed_resp; + + resp = (struct nlmsghdr *)recvbuf; + + switch (resp->nlmsg_type) { + case NLMSG_ERROR: + err = (struct nlmsgerr *)NLMSG_DATA(resp); + if (resp->nlmsg_len < NLMSG_LENGTH(sizeof(*err))) + goto malformed_resp; + + switch (err->error) { + + case 0: + break; + + case -EEXIST: + rc = -1; + break; + + default: + macvtapError(VIR_ERR_INTERNAL_ERROR, "%s", + _("error setting device mac address")); + rc = -1; + } + break; + + case NLMSG_DONE: + break; + + default: + goto malformed_resp; + } + +err_exit: + nlmsg_free(nl_msg); + + VIR_FREE(recvbuf); + + return rc; + +malformed_resp: + nlmsg_free(nl_msg); + + macvtapError(VIR_ERR_INTERNAL_ERROR, "%s", + _("malformed netlink response message")); + VIR_FREE(recvbuf); + return -1; + +buffer_too_small: + nlmsg_free(nl_msg); + + macvtapError(VIR_ERR_INTERNAL_ERROR, "%s", + _("allocated netlink buffer is too small")); + return -1; +} + static int link_add(const char *type, const unsigned char *macaddress, int macaddrsize, diff --git a/src/util/macvtap.h b/src/util/macvtap.h index a1383c4..d71546a 100644 --- a/src/util/macvtap.h +++ b/src/util/macvtap.h @@ -75,6 +75,12 @@ enum virVMOperationType { # include "internal.h" +int get_macaddr(const unsigned char *macaddress, int macaddrsize, + const char *srcdev ); + +int set_macaddr(const unsigned char *macaddress, int macaddrsize, + const char *srcdev ); + int openMacvtapTap(const char *ifname, const unsigned char *macaddress, const char *linkdev,

2 1

[libvirt] [PATCH] virt-aa-helper: add missing include
by Eric Blake 08 Jun '11

08 Jun '11

Regression introduced in commit 02e8691. * src/security/virt-aa-helper.c (includes): Reflect move of virRun. --- Pushing under the build-breaker rule, for Ubuntu. src/security/virt-aa-helper.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/src/security/virt-aa-helper.c b/src/security/virt-aa-helper.c index 41ba4a3..afc0d33 100644 --- a/src/security/virt-aa-helper.c +++ b/src/security/virt-aa-helper.c @@ -31,6 +31,7 @@ #include "buf.h" #include "util.h" #include "memory.h" +#include "command.h" #include "security_driver.h" #include "security_apparmor.h" -- 1.7.4.4

1 0

[libvirt] [libvirt-php][PATCH] screenshot of remote host is available
by warp.kawada＠gmail.com 08 Jun '11

08 Jun '11

screenshot of remote host is available. get_domain_object make so many error to message log, so you had better not use . diff --git a/examples/libvirt.php b/examples/libvirt.php index 1ca71b6..bf903f6 100644 --- a/examples/libvirt.php +++ b/examples/libvirt.php @@ -29,9 +29,9 @@ } function domain_get_screenshot($domain) { - $dom = $this->get_domain_object($domain); - - $tmp = libvirt_domain_get_screenshot($dom); + $dom = libvirt_domain_lookup_by_uuid_string($this->conn, $domain); + $hostname = $this->get_hostname(); + $tmp = libvirt_domain_get_screenshot($dom, $hostname); return ($tmp) ? $tmp : $this->_set_last_error(); } diff --git a/src/libvirt-php.cb/src/libvirt-php.c index 87e0467..4a53e33 100644 --- a/src/libvirt-php.c +++ b/src/libvirt-php.c @@ -1880,6 +1880,7 @@ PHP_FUNCTION(libvirt_domain_get_screenshot) int port = -1; int scancode = 10; char *path; + char *hostname; path = get_feature_binary("screenshot"); if (access(path, X_OK) != 0) { @@ -1887,7 +1888,7 @@ PHP_FUNCTION(libvirt_domain_get_screenshot) RETURN_FALSE; } - GET_DOMAIN_FROM_ARGS("r|l",&zdomain, &scancode); + GET_DOMAIN_FROM_ARGS("rs|l",&zdomain, &hostname, &scancode); xml=virDomainGetXMLDesc(domain->domain, 0); if (xml==NULL) { @@ -1912,10 +1913,16 @@ PHP_FUNCTION(libvirt_domain_get_screenshot) RETURN_FALSE; if (childpid == 0) { + char *prm = NULL; char tmpp[8] = { 0 }; - + snprintf(tmpp, sizeof(tmpp), ":%d", port); - retval = execlp(path, basename(path), tmpp, file, NULL); + prm = emalloc((sizeof(tmpp) + sizeof(hostname)) * sizeof(char)); + sprintf(prm, "%s%s", hostname, tmpp); + + retval = execlp(path, basename(path), prm, file, NULL); + + free(prm); _exit( retval ); } else {

3 3

[libvirt] [libvirt-php] Work on ./example
by David Streibl 08 Jun '11

08 Jun '11

Hello, as part of my student project I am working on simple web interface which would support multiple virtualisation platforms. This of course led me to libvirt and libvirt-php more specificly. Right now I'm using modfied code of exapme Libvirt class and the plan is: - add phpdoc - refactor it to match libvirt convetion (get_domain_someting -> dmain_get_something) - split Libvirt to subclasses for domain, connection, network, storage (not completly sure if it is good idea) - add few unit tests (dont know about time and usefulness of this) Would it be welcomed if I send to whole think or even parts of it as patches to libvirt-php/example? Thanks for any reply and sorry for my english, David

2 1

[libvirt] [PATCH] build: Fix typos in configure.ac
by Osier Yang 08 Jun '11

08 Jun '11

--- configure.ac | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/configure.ac b/configure.ac index 5307a1d..7982e21 100644 --- a/configure.ac +++ b/configure.ac @@ -1705,9 +1705,9 @@ if test "$with_storage_lvm" = "yes" || test "$with_storage_lvm" = "check"; then AC_DEFINE_UNQUOTED([PVCREATE],["$PVCREATE"],[Location of pvcreate program]) AC_DEFINE_UNQUOTED([VGCREATE],["$VGCREATE"],[Location of vgcreate program]) AC_DEFINE_UNQUOTED([LVCREATE],["$LVCREATE"],[Location of lvcreate program]) - AC_DEFINE_UNQUOTED([PVREMOVE],["$PVREMOVE"],[Location of pvcreate program]) - AC_DEFINE_UNQUOTED([VGREMOVE],["$VGREMOVE"],[Location of vgcreate program]) - AC_DEFINE_UNQUOTED([LVREMOVE],["$LVREMOVE"],[Location of lvcreate program]) + AC_DEFINE_UNQUOTED([PVREMOVE],["$PVREMOVE"],[Location of pvremove program]) + AC_DEFINE_UNQUOTED([VGREMOVE],["$VGREMOVE"],[Location of vgremove program]) + AC_DEFINE_UNQUOTED([LVREMOVE],["$LVREMOVE"],[Location of lvremove program]) AC_DEFINE_UNQUOTED([VGCHANGE],["$VGCHANGE"],[Location of vgchange program]) AC_DEFINE_UNQUOTED([VGSCAN],["$VGSCAN"],[Location of vgscan program]) AC_DEFINE_UNQUOTED([PVS],["$PVS"],[Location of pvs program]) -- 1.7.4

1 1

[libvirt] [PATCH] virsh: Expose virDomainMigrateSetMaxSpeed API to virsh
by Osier Yang 07 Jun '11

07 Jun '11

API virDomainMigrateSetMaxSpeed was introduced since 0.9.0, but no command in virsh yet. --- tools/virsh.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++ tools/virsh.pod | 5 +++++ 2 files changed, 51 insertions(+), 0 deletions(-) diff --git a/tools/virsh.c b/tools/virsh.c index d98be1c..ab83ba9 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -4301,6 +4301,50 @@ done: } /* + * "migrate-setspeed" command + */ +static const vshCmdInfo info_migrate_setspeed[] = { + {"help", N_("Set the maximum migration bandwidth")}, + {"desc", N_("Set the maximum migration bandwidth (in Mbps) for a domain " + "which is being migrated to another host.")}, + {NULL, NULL} +}; + +static const vshCmdOptDef opts_migrate_setspeed[] = { + {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or uuid")}, + {"bandwidth", VSH_OT_INT, VSH_OFLAG_REQ, N_("migration bandwidth limit in Mbps")}, + {NULL, 0, 0, NULL} +}; + +static bool +cmdMigrateSetMaxSpeed(vshControl *ctl, const vshCmd *cmd) +{ + virDomainPtr dom = NULL; + unsigned long bandwidth = 0; + bool ret = false; + + if (!vshConnectionUsability(ctl, ctl->conn)) + return false; + + if (!(dom = vshCommandOptDomain(ctl, cmd, NULL))) + return false; + + if (vshCommandOptUL(cmd, "bandwidth", &bandwidth) < 0) { + vshError(ctl, "%s", _("migrate: Invalid bandwidth")); + goto done; + } + + if (virDomainMigrateSetMaxSpeed(dom, bandwidth, 0) < 0) + goto done; + + ret = true; + +done: + virDomainFree(dom); + return ret; +} + +/* * "net-autostart" command */ static const vshCmdInfo info_network_autostart[] = { @@ -11080,6 +11124,8 @@ static const vshCmdDef domManagementCmds[] = { {"migrate", cmdMigrate, opts_migrate, info_migrate, 0}, {"migrate-setmaxdowntime", cmdMigrateSetMaxDowntime, opts_migrate_setmaxdowntime, info_migrate_setmaxdowntime, 0}, + {"migrate-setspeed", cmdMigrateSetMaxSpeed, + opts_migrate_setspeed, info_migrate_setspeed, 0}, {"reboot", cmdReboot, opts_reboot, info_reboot, 0}, {"restore", cmdRestore, opts_restore, info_restore, 0}, {"resume", cmdResume, opts_resume, info_resume, 0}, diff --git a/tools/virsh.pod b/tools/virsh.pod index 7ed3003..98adc90 100644 --- a/tools/virsh.pod +++ b/tools/virsh.pod @@ -542,6 +542,11 @@ Set maximum tolerable downtime for a domain which is being live-migrated to another host. The I<downtime> is a number of milliseconds the guest is allowed to be down at the end of live migration. +=item B<migrate-setspeed> I<domain-id> I<bandwidth> + +Set the maximum migration bandwidth (in Mbps) for a domain which is being +migrated to another host. + =item B<reboot> I<domain-id> Reboot a domain. This acts just as if the domain had the B<reboot> -- 1.7.4

2 2