[libvirt] [PATCH] Add XML config switch to enable/disable vhost-net support
by Laine Stump
This patch is in response to
https://bugzilla.redhat.com/show_bug.cgi?id=643050
The existing libvirt support for the vhost-net backend to the virtio
network driver happens automatically - if the vhost-net device is
available, it is always enabled, otherwise the standard userland
virtio backend is used.
This patch makes it possible to force whether or not vhost-net is used
with a bit of XML. Adding a <driver> element to the interface XML, eg:
<interface type="network">
<model type="virtio"/>
<driver name="vhost"/>
will force use of vhost-net (if it's not available, the domain will
fail to start). if driver name="qemu", vhost-net will not be used even
if it is available.
If there is no <driver name='xxx'/> in the config, libvirt will revert
to the pre-existing automatic behavior - use vhost-net if it's
available, and userland backend if vhost-net isn't available.
---
Note that I don't really like the "name='vhost|qemu'" nomenclature,
but am including it here just to get the patches on the list. I could
live with it this way, or with any of the following (anyone have a
strong opinion?) (note that in all cases, nothing specified means "try
to use vhost, but fallback to userland if necessary")
vhost='on|off'
vhost='required|disabled'
mode='vhost|qemu'
mode='kernel|user'
backend='kernel|user'
(So far the strongest opinion has been for the current "name='vhost|qemu'")
Oh, and also - sorry Eric, but I didn't have the brain cells left
tonight to add this new bit to the documentation, and I really want to
get the patch up/in now, so that will have to wait for a followup next
week :-)
docs/schemas/domain.rng | 13 ++++++++
src/conf/domain_conf.c | 27 +++++++++++++++++-
src/conf/domain_conf.h | 10 ++++++
src/qemu/qemu_command.c | 71 +++++++++++++++++++++++++++++++++++++++--------
src/qemu/qemu_command.h | 3 --
5 files changed, 108 insertions(+), 16 deletions(-)
diff --git a/docs/schemas/domain.rng b/docs/schemas/domain.rng
index a524e4b..6d0654d 100644
--- a/docs/schemas/domain.rng
+++ b/docs/schemas/domain.rng
@@ -1005,6 +1005,19 @@
</element>
</optional>
<optional>
+ <element name="driver">
+ <optional>
+ <attribute name="name">
+ <choice>
+ <value>qemu</value>
+ <value>vhost</value>
+ </choice>
+ </attribute>
+ </optional>
+ <empty/>
+ </element>
+ </optional>
+ <optional>
<ref name="address"/>
</optional>
<optional>
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index b4df38c..04ed502 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -184,6 +184,10 @@ VIR_ENUM_IMPL(virDomainNet, VIR_DOMAIN_NET_TYPE_LAST,
"internal",
"direct")
+VIR_ENUM_IMPL(virDomainNetBackend, VIR_DOMAIN_NET_BACKEND_TYPE_LAST,
+ "qemu",
+ "vhost")
+
VIR_ENUM_IMPL(virDomainChrChannelTarget,
VIR_DOMAIN_CHR_CHANNEL_TARGET_TYPE_LAST,
"guestfwd",
@@ -2289,6 +2293,7 @@ virDomainNetDefParseXML(virCapsPtr caps,
char *address = NULL;
char *port = NULL;
char *model = NULL;
+ char *backend = NULL;
char *filter = NULL;
char *internal = NULL;
char *devaddr = NULL;
@@ -2371,6 +2376,8 @@ virDomainNetDefParseXML(virCapsPtr caps,
script = virXMLPropString(cur, "path");
} else if (xmlStrEqual (cur->name, BAD_CAST "model")) {
model = virXMLPropString(cur, "type");
+ } else if (xmlStrEqual (cur->name, BAD_CAST "driver")) {
+ backend = virXMLPropString(cur, "name");
} else if (xmlStrEqual (cur->name, BAD_CAST "filterref")) {
filter = virXMLPropString(cur, "filter");
VIR_FREE(filterparams);
@@ -2558,6 +2565,18 @@ virDomainNetDefParseXML(virCapsPtr caps,
model = NULL;
}
+ if ((backend != NULL) &&
+ (def->model && STREQ(def->model, "virtio"))) {
+ int b;
+ if ((b = virDomainNetBackendTypeFromString(backend)) < 0) {
+ virDomainReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Unkown interface <driver name='%s'> has been specified"),
+ backend);
+ goto error;
+ }
+ def->backend = b;
+ def->backend_specified = 1;
+ }
if (filter != NULL) {
switch (def->type) {
case VIR_DOMAIN_NET_TYPE_ETHERNET:
@@ -2584,6 +2603,7 @@ cleanup:
VIR_FREE(script);
VIR_FREE(bridge);
VIR_FREE(model);
+ VIR_FREE(backend);
VIR_FREE(filter);
VIR_FREE(type);
VIR_FREE(internal);
@@ -6275,9 +6295,14 @@ virDomainNetDefFormat(virBufferPtr buf,
if (def->ifname)
virBufferEscapeString(buf, " <target dev='%s'/>\n",
def->ifname);
- if (def->model)
+ if (def->model) {
virBufferEscapeString(buf, " <model type='%s'/>\n",
def->model);
+ if (STREQ(def->model, "virtio") && def->backend_specified) {
+ virBufferVSprintf(buf, " <driver name='%s'/>\n",
+ virDomainNetBackendTypeToString(def->backend));
+ }
+ }
if (def->filter) {
virBufferEscapeString(buf, " <filterref filter='%s'",
def->filter);
diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
index a459a22..451ccad 100644
--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
@@ -292,6 +292,13 @@ enum virDomainNetType {
VIR_DOMAIN_NET_TYPE_LAST,
};
+/* the backend driver used for virtio interfaces */
+enum virDomainNetBackendType {
+ VIR_DOMAIN_NET_BACKEND_TYPE_QEMU, /* userland */
+ VIR_DOMAIN_NET_BACKEND_TYPE_VHOST, /* kernel */
+
+ VIR_DOMAIN_NET_BACKEND_TYPE_LAST,
+};
/* the mode type for macvtap devices */
enum virDomainNetdevMacvtapType {
@@ -310,6 +317,8 @@ struct _virDomainNetDef {
enum virDomainNetType type;
unsigned char mac[VIR_MAC_BUFLEN];
char *model;
+ enum virDomainNetBackendType backend;
+ int backend_specified : 1;
union {
struct {
char *dev;
@@ -1264,6 +1273,7 @@ VIR_ENUM_DECL(virDomainControllerModel)
VIR_ENUM_DECL(virDomainFS)
VIR_ENUM_DECL(virDomainFSAccessMode)
VIR_ENUM_DECL(virDomainNet)
+VIR_ENUM_DECL(virDomainNetBackend)
VIR_ENUM_DECL(virDomainChrDevice)
VIR_ENUM_DECL(virDomainChrChannelTarget)
VIR_ENUM_DECL(virDomainChrConsoleTarget)
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index 86c5bb5..9eb54a1 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -302,24 +302,61 @@ cleanup:
}
-int
+static int
qemuOpenVhostNet(virDomainNetDefPtr net,
- unsigned long long qemuCmdFlags)
+ unsigned long long qemuCmdFlags,
+ int *vhostfd)
{
- /* If qemu supports vhost-net mode (including the -netdev command
- * option), the nic model is virtio, and we can open
- * /dev/vhost_net, assume that vhost-net mode is available and
- * return the fd to /dev/vhost_net. Otherwise, return -1.
- */
+ *vhostfd = -1; /* assume we won't use vhost */
+ /* If the config says explicitly to not use vhost, return now */
+ if (net->backend_specified &&
+ (net->backend == VIR_DOMAIN_NET_BACKEND_TYPE_QEMU)) {
+ return 0;
+ }
+
+ /* If qemu doesn't support vhost-net mode (including the -netdev command
+ * option), don't try to open the device.
+ */
if (!(qemuCmdFlags & QEMUD_CMD_FLAG_VNET_HOST &&
qemuCmdFlags & QEMUD_CMD_FLAG_NETDEV &&
- qemuCmdFlags & QEMUD_CMD_FLAG_DEVICE &&
- net->model && STREQ(net->model, "virtio")))
- return -1;
+ qemuCmdFlags & QEMUD_CMD_FLAG_DEVICE)) {
+ if (net->backend_specified &&
+ (net->backend == VIR_DOMAIN_NET_BACKEND_TYPE_VHOST)) {
+ qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ "%s", _("vhost-net is not supported with "
+ "this QEMU binary"));
+ return -1;
+ }
+ return 0;
+ }
- return open("/dev/vhost-net", O_RDWR, 0);
+ /* If the nic model isn't virtio, don't try to open. */
+ if (!(net->model && STREQ(net->model, "virtio"))) {
+ if (net->backend_specified &&
+ (net->backend == VIR_DOMAIN_NET_BACKEND_TYPE_VHOST)) {
+ qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ "%s", _("vhost-net is only supported for "
+ "virtio network interfaces"));
+ return -1;
+ }
+ return 0;
+ }
+
+ *vhostfd = open("/dev/vhost-net", O_RDWR, 0);
+
+ /* If the config says explicitly to use vhost and we couldn't open it,
+ * report an error.
+ */
+ if ((*vhostfd < 0) && net->backend_specified &&
+ (net->backend == VIR_DOMAIN_NET_BACKEND_TYPE_VHOST)) {
+ qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ "%s", _("vhost-net was requested for an interface, "
+ "but is unavailable"));
+ return -1;
+ }
+ return 0;
}
@@ -3278,7 +3315,10 @@ qemuBuildCommandLine(virConnectPtr conn,
net->type == VIR_DOMAIN_NET_TYPE_DIRECT) {
/* Attempt to use vhost-net mode for these types of
network device */
- int vhostfd = qemuOpenVhostNet(net, qemuCmdFlags);
+ int vhostfd;
+
+ if (qemuOpenVhostNet(net, qemuCmdFlags, &vhostfd) < 0)
+ goto error;
if (vhostfd >= 0) {
virCommandTransferFD(cmd, vhostfd);
@@ -4618,6 +4658,13 @@ qemuParseCommandLineNet(virCapsPtr caps,
} else if (STREQ(keywords[i], "model")) {
def->model = values[i];
values[i] = NULL;
+ } else if (STREQ(keywords[i], "vhost")) {
+ if ((values[i] == NULL) || STREQ(values[i], "on")) {
+ def->backend = VIR_DOMAIN_NET_BACKEND_TYPE_VHOST;
+ } else if (STREQ(keywords[i], "off")) {
+ def->backend = VIR_DOMAIN_NET_BACKEND_TYPE_QEMU;
+ }
+ def->backend_specified = 1;
}
}
diff --git a/src/qemu/qemu_command.h b/src/qemu/qemu_command.h
index 4c42a10..5439184 100644
--- a/src/qemu/qemu_command.h
+++ b/src/qemu/qemu_command.h
@@ -116,9 +116,6 @@ int qemuNetworkIfaceConnect(virConnectPtr conn,
unsigned long long qemCmdFlags)
ATTRIBUTE_NONNULL(1);
-int qemuOpenVhostNet(virDomainNetDefPtr net,
- unsigned long long qemuCmdFlags);
-
int qemuPhysIfaceConnect(virConnectPtr conn,
struct qemud_driver *driver,
virDomainNetDefPtr net,
--
1.7.3.4
13 years, 9 months
[libvirt] [PATCH 1/2] qemu: add -incoming fd:n capability checking
by Eric Blake
* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_MIGRATE_QEMU_FD):
New enum value.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Populate
flags according to qemu version.
* tests/qemuhelptest.c (mymain): Adjust test.
---
I feel a bit dirty relying on just a version test for whether
-incoming fd:n is supported, but it's no different than the
existing code for -incoming unix:path which was added about the
same time. Unfortunately, 'qemu -help' doesn't list which
particular protocols it supports for -incoming.
src/qemu/qemu_capabilities.c | 6 +++++-
src/qemu/qemu_capabilities.h | 1 +
tests/qemuhelptest.c | 12 ++++++++----
3 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c
index 913fbf7..3d10b42 100644
--- a/src/qemu/qemu_capabilities.c
+++ b/src/qemu/qemu_capabilities.c
@@ -943,6 +943,8 @@ qemuCapsComputeCmdFlags(const char *help,
* Handling of -incoming arg with varying features
* -incoming tcp (kvm >= 79, qemu >= 0.10.0)
* -incoming exec (kvm >= 80, qemu >= 0.10.0)
+ * -incoming unix (qemu >= 0.12.0)
+ * -incoming fd (qemu >= 0.12.0)
* -incoming stdio (all earlier kvm)
*
* NB, there was a pre-kvm-79 'tcp' support, but it
@@ -952,8 +954,10 @@ qemuCapsComputeCmdFlags(const char *help,
if (version >= 10000) {
flags |= QEMUD_CMD_FLAG_MIGRATE_QEMU_TCP;
flags |= QEMUD_CMD_FLAG_MIGRATE_QEMU_EXEC;
- if (version >= 12000)
+ if (version >= 12000) {
flags |= QEMUD_CMD_FLAG_MIGRATE_QEMU_UNIX;
+ flags |= QEMUD_CMD_FLAG_MIGRATE_QEMU_FD;
+ }
} else if (kvm_version >= 79) {
flags |= QEMUD_CMD_FLAG_MIGRATE_QEMU_TCP;
if (kvm_version >= 80)
diff --git a/src/qemu/qemu_capabilities.h b/src/qemu/qemu_capabilities.h
index 83afd9b..ee648f0 100644
--- a/src/qemu/qemu_capabilities.h
+++ b/src/qemu/qemu_capabilities.h
@@ -82,6 +82,7 @@ enum qemuCapsFlags {
QEMUD_CMD_FLAG_VGA_QXL = (1LL << 45), /* The 'qxl' arg for '-vga' */
QEMUD_CMD_FLAG_SPICE = (1LL << 46), /* Is -spice avail */
QEMUD_CMD_FLAG_VGA_NONE = (1LL << 47), /* The 'none' arg for '-vga' */
+ QEMUD_CMD_FLAG_MIGRATE_QEMU_FD = (1LL << 48), /* -incoming fd:n */
};
virCapsPtr qemuCapsInit(virCapsPtr old_caps);
diff --git a/tests/qemuhelptest.c b/tests/qemuhelptest.c
index 553abbc..18a71fa 100644
--- a/tests/qemuhelptest.c
+++ b/tests/qemuhelptest.c
@@ -286,7 +286,8 @@ mymain(int argc, char **argv)
QEMUD_CMD_FLAG_BOOT_MENU |
QEMUD_CMD_FLAG_NAME_PROCESS |
QEMUD_CMD_FLAG_SMBIOS_TYPE |
- QEMUD_CMD_FLAG_VGA_NONE,
+ QEMUD_CMD_FLAG_VGA_NONE |
+ QEMUD_CMD_FLAG_MIGRATE_QEMU_FD,
12001, 0, 0);
DO_TEST("qemu-kvm-0.12.1.2-rhel60",
QEMUD_CMD_FLAG_VNC_COLON |
@@ -324,7 +325,8 @@ mymain(int argc, char **argv)
QEMUD_CMD_FLAG_SMBIOS_TYPE |
QEMUD_CMD_FLAG_VGA_QXL |
QEMUD_CMD_FLAG_SPICE |
- QEMUD_CMD_FLAG_VGA_NONE,
+ QEMUD_CMD_FLAG_VGA_NONE |
+ QEMUD_CMD_FLAG_MIGRATE_QEMU_FD,
12001, 1, 0);
DO_TEST("qemu-kvm-0.12.3",
QEMUD_CMD_FLAG_VNC_COLON |
@@ -360,7 +362,8 @@ mymain(int argc, char **argv)
QEMUD_CMD_FLAG_NESTING |
QEMUD_CMD_FLAG_NAME_PROCESS |
QEMUD_CMD_FLAG_SMBIOS_TYPE |
- QEMUD_CMD_FLAG_VGA_NONE,
+ QEMUD_CMD_FLAG_VGA_NONE |
+ QEMUD_CMD_FLAG_MIGRATE_QEMU_FD,
12003, 1, 0);
DO_TEST("qemu-kvm-0.13.0",
QEMUD_CMD_FLAG_VNC_COLON |
@@ -403,7 +406,8 @@ mymain(int argc, char **argv)
QEMUD_CMD_FLAG_NAME_PROCESS |
QEMUD_CMD_FLAG_SMBIOS_TYPE |
QEMUD_CMD_FLAG_SPICE |
- QEMUD_CMD_FLAG_VGA_NONE,
+ QEMUD_CMD_FLAG_VGA_NONE |
+ QEMUD_CMD_FLAG_MIGRATE_QEMU_FD,
13000, 1, 0);
return ret == 0 ? EXIT_SUCCESS : EXIT_FAILURE;
--
1.7.3.3
13 years, 10 months
[libvirt] [PATCH] Add support for multiple serial ports into the Xen driver
by Michal Novotny
Hi,
this is the patch to add support for multiple serial ports to the
libvirt Xen driver. It support both old style (serial = "pty") and
new style (serial = [ "/dev/ttyS0", "/dev/ttyS1" ]) definition and
tests for xml2sexpr, sexpr2xml and xmconfig have been added as well.
Written and tested on RHEL-5 Xen dom0 and working as designed but
the Xen version have to have patch for RHBZ #614004.
Also, this patch is addressing issue described in RHBZ #670789.
Michal
Signed-off-by: Michal Novotny <minovotn(a)redhat.com>
---
src/xen/xend_internal.c | 73 ++++++++++-
src/xen/xm_internal.c | 141 +++++++++++++++++---
.../sexpr2xml-fv-serial-dev-2-ports.sexpr | 1 +
.../sexpr2xml-fv-serial-dev-2-ports.xml | 53 ++++++++
tests/sexpr2xmltest.c | 1 +
.../test-fullvirt-serial-dev-2-ports.cfg | 25 ++++
.../test-fullvirt-serial-dev-2-ports.xml | 55 ++++++++
tests/xmconfigtest.c | 1 +
.../xml2sexpr-fv-serial-dev-2-ports.sexpr | 1 +
.../xml2sexpr-fv-serial-dev-2-ports.xml | 44 ++++++
tests/xml2sexprtest.c | 1 +
11 files changed, 370 insertions(+), 26 deletions(-)
create mode 100644 tests/sexpr2xmldata/sexpr2xml-fv-serial-dev-2-ports.sexpr
create mode 100644 tests/sexpr2xmldata/sexpr2xml-fv-serial-dev-2-ports.xml
create mode 100644 tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.cfg
create mode 100644 tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.xml
create mode 100644 tests/xml2sexprdata/xml2sexpr-fv-serial-dev-2-ports.sexpr
create mode 100644 tests/xml2sexprdata/xml2sexpr-fv-serial-dev-2-ports.xml
diff --git a/src/xen/xend_internal.c b/src/xen/xend_internal.c
index 44d5a22..493736e 100644
--- a/src/xen/xend_internal.c
+++ b/src/xen/xend_internal.c
@@ -1218,6 +1218,9 @@ xenDaemonParseSxprChar(const char *value,
if (value[0] == '/') {
def->source.type = VIR_DOMAIN_CHR_TYPE_DEV;
+ def->data.file.path = strdup(value);
+ if (!def->data.file.path)
+ goto error;
} else {
if ((tmp = strchr(value, ':')) != NULL) {
*tmp = '\0';
@@ -2334,6 +2337,8 @@ xenDaemonParseSxpr(virConnectPtr conn,
tty = xenStoreDomainGetConsolePath(conn, def->id);
xenUnifiedUnlock(priv);
if (hvm) {
+
+
tmp = sexpr_node(root, "domain/image/hvm/serial");
if (tmp && STRNEQ(tmp, "none")) {
virDomainChrDefPtr chr;
@@ -2346,6 +2351,54 @@ xenDaemonParseSxpr(virConnectPtr conn,
chr->deviceType = VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL;
def->serials[def->nserials++] = chr;
}
+
+
+ const struct sexpr *serial_root;
+ bool have_multiple_serials = false;
+
+ serial_root = sexpr_lookup(root, "domain/image/hvm/serial");
+ if (serial_root) {
+ const struct sexpr *cur, *node, *cur2;
+
+ for (cur = serial_root; cur->kind == SEXPR_CONS; cur = cur->u.s.cdr) {
+ node = cur->u.s.car;
+
+ for (cur2 = node; cur2->kind == SEXPR_CONS; cur2 = cur2->u.s.cdr) {
+ tmp = cur2->u.s.car->u.value;
+
+ if (tmp && STRNEQ(tmp, "none")) {
+ virDomainChrDefPtr chr;
+ if ((chr = xenDaemonParseSxprChar(tmp, tty)) == NULL)
+ goto error;
+ if (VIR_REALLOC_N(def->serials, def->nserials+1) < 0) {
+ virDomainChrDefFree(chr);
+ goto no_memory;
+ }
+ chr->targetType = VIR_DOMAIN_CHR_TARGET_TYPE_SERIAL;
+ chr->target.port = def->nserials;
+ def->serials[def->nserials++] = chr;
+ }
+ have_multiple_serials = true;
+ }
+ }
+ }
+
+ /* If no serial port has been defined (using the new-style definition) use the old way */
+ if (!have_multiple_serials) {
+ tmp = sexpr_node(root, "domain/image/hvm/serial");
+ if (tmp && STRNEQ(tmp, "none")) {
+ virDomainChrDefPtr chr;
+ if ((chr = xenDaemonParseSxprChar(tmp, tty)) == NULL)
+ goto error;
+ if (VIR_REALLOC_N(def->serials, def->nserials+1) < 0) {
+ virDomainChrDefFree(chr);
+ goto no_memory;
+ }
+ chr->targetType = VIR_DOMAIN_CHR_TARGET_TYPE_SERIAL;
+ def->serials[def->nserials++] = chr;
+ }
+ }
+
tmp = sexpr_node(root, "domain/image/hvm/parallel");
if (tmp && STRNEQ(tmp, "none")) {
virDomainChrDefPtr chr;
@@ -5958,10 +6011,22 @@ xenDaemonFormatSxpr(virConnectPtr conn,
virBufferAddLit(&buf, "(parallel none)");
}
if (def->serials) {
- virBufferAddLit(&buf, "(serial ");
- if (xenDaemonFormatSxprChr(def->serials[0], &buf) < 0)
- goto error;
- virBufferAddLit(&buf, ")");
+ if (def->nserials > 1) {
+ virBufferAddLit(&buf, "(serial (");
+ for (i = 0; i < def->nserials; i++) {
+ if (xenDaemonFormatSxprChr(def->serials[i], &buf) < 0)
+ goto error;
+ if (i < def->nserials - 1)
+ virBufferAddLit(&buf, " ");
+ }
+ virBufferAddLit(&buf, "))");
+ }
+ else {
+ virBufferAddLit(&buf, "(serial ");
+ if (xenDaemonFormatSxprChr(def->serials[0], &buf) < 0)
+ goto error;
+ virBufferAddLit(&buf, ")");
+ }
} else {
virBufferAddLit(&buf, "(serial none)");
}
diff --git a/src/xen/xm_internal.c b/src/xen/xm_internal.c
index bfb6698..f457d80 100644
--- a/src/xen/xm_internal.c
+++ b/src/xen/xm_internal.c
@@ -1432,20 +1432,54 @@ xenXMDomainConfigParse(virConnectPtr conn, virConfPtr conf) {
chr = NULL;
}
- if (xenXMConfigGetString(conf, "serial", &str, NULL) < 0)
- goto cleanup;
- if (str && STRNEQ(str, "none") &&
- !(chr = xenDaemonParseSxprChar(str, NULL)))
- goto cleanup;
+ /* Try to get the list of values to support multiple serial ports */
+ list = virConfGetValue(conf, "serial");
+ if (list && list->type == VIR_CONF_LIST) {
+ list = list->list;
+ while (list) {
+ char *port;
+
+ if ((list->type != VIR_CONF_STRING) || (list->str == NULL)) {
+ xenXMError(VIR_ERR_INTERNAL_ERROR,
+ _("config value %s was malformed"), port);
+ goto cleanup;
+ }
- if (chr) {
- if (VIR_ALLOC_N(def->serials, 1) < 0) {
- virDomainChrDefFree(chr);
- goto no_memory;
+ port = list->str;
+ if (VIR_ALLOC(chr) < 0)
+ goto no_memory;
+ if (!(chr = xenDaemonParseSxprChar(port, NULL)))
+ goto cleanup;
+
+ if (VIR_REALLOC_N(def->serials, def->nserials+1) < 0)
+ goto no_memory;
+
+ chr->targetType = VIR_DOMAIN_CHR_TARGET_TYPE_SERIAL;
+ chr->target.port = def->nserials;
+
+ def->serials[def->nserials++] = chr;
+ chr = NULL;
+
+ list = list->next;
+ }
+ }
+ /* If domain is not using multiple serial ports we parse data old way */
+ else {
+ if (xenXMConfigGetString(conf, "serial", &str, NULL) < 0)
+ goto cleanup;
+ if (str && STRNEQ(str, "none") &&
+ !(chr = xenDaemonParseSxprChar(str, NULL)))
+ goto cleanup;
+
+ if (chr) {
+ if (VIR_ALLOC_N(def->serials, 1) < 0) {
+ virDomainChrDefFree(chr);
+ goto no_memory;
+ }
+ chr->targetType = VIR_DOMAIN_CHR_TARGET_TYPE_SERIAL;
+ def->serials[0] = chr;
+ def->nserials++;
}
- chr->deviceType = VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL;
- def->serials[0] = chr;
- def->nserials++;
}
} else {
if (!(def->console = xenDaemonParseSxprChar("pty", NULL)))
@@ -2123,6 +2157,45 @@ cleanup:
return -1;
}
+static int xenXMDomainConfigFormatSerial(virConfValuePtr list,
+ virDomainChrDefPtr serial)
+{
+ virBuffer buf = VIR_BUFFER_INITIALIZER;
+ virConfValuePtr val, tmp;
+ int ret;
+
+ ret = xenDaemonFormatSxprChr(serial, &buf);
+ if (ret < 0) {
+ virReportOOMError();
+ goto cleanup;
+ }
+ if (virBufferError(&buf)) {
+ virReportOOMError();
+ goto cleanup;
+ }
+
+ if (VIR_ALLOC(val) < 0) {
+ virReportOOMError();
+ goto cleanup;
+ }
+
+ val->type = VIR_CONF_STRING;
+ val->str = virBufferContentAndReset(&buf);
+ tmp = list->list;
+ while (tmp && tmp->next)
+ tmp = tmp->next;
+ if (tmp)
+ tmp->next = val;
+ else
+ list->list = val;
+
+ return 0;
+
+cleanup:
+ virBufferFreeAndReset(&buf);
+ return -1;
+}
+
static int xenXMDomainConfigFormatNet(virConnectPtr conn,
virConfValuePtr list,
virDomainNetDefPtr net,
@@ -2685,17 +2758,41 @@ virConfPtr xenXMDomainConfigFormat(virConnectPtr conn,
}
if (def->nserials) {
- virBuffer buf = VIR_BUFFER_INITIALIZER;
- char *str;
- int ret;
+ /* If there's a single serial port definition use the old approach not to break old configs */
+ if (def->nserials == 1) {
+ virBuffer buf = VIR_BUFFER_INITIALIZER;
+ char *str;
+ int ret;
+
+ ret = xenDaemonFormatSxprChr(def->serials[0], &buf);
+ str = virBufferContentAndReset(&buf);
+ if (ret == 0)
+ ret = xenXMConfigSetString(conf, "serial", str);
+ VIR_FREE(str);
+ if (ret < 0)
+ goto no_memory;
+ }
+ else {
+ virConfValuePtr serialVal = NULL;
- ret = xenDaemonFormatSxprChr(def->serials[0], &buf);
- str = virBufferContentAndReset(&buf);
- if (ret == 0)
- ret = xenXMConfigSetString(conf, "serial", str);
- VIR_FREE(str);
- if (ret < 0)
- goto no_memory;
+ if (VIR_ALLOC(serialVal) < 0)
+ goto no_memory;
+ serialVal->type = VIR_CONF_LIST;
+ serialVal->list = NULL;
+
+ for (i = 0; i < def->nserials; i++) {
+ if (xenXMDomainConfigFormatSerial(serialVal, def->serials[i]) < 0)
+ goto cleanup;
+ }
+
+ if (serialVal->list != NULL) {
+ int ret = virConfSetValue(conf, "serial", serialVal);
+ serialVal = NULL;
+ if (ret < 0)
+ goto no_memory;
+ }
+ VIR_FREE(serialVal);
+ }
} else {
if (xenXMConfigSetString(conf, "serial", "none") < 0)
goto no_memory;
diff --git a/tests/sexpr2xmldata/sexpr2xml-fv-serial-dev-2-ports.sexpr b/tests/sexpr2xmldata/sexpr2xml-fv-serial-dev-2-ports.sexpr
new file mode 100644
index 0000000..e709eb0
--- /dev/null
+++ b/tests/sexpr2xmldata/sexpr2xml-fv-serial-dev-2-ports.sexpr
@@ -0,0 +1 @@
+(domain (domid 1)(name 'fvtest')(memory 400)(maxmem 400)(vcpus 1)(uuid 'b5d70dd275cdaca517769660b059d8ff')(on_poweroff 'destroy')(on_reboot 'restart')(on_crash 'restart')(image (hvm (kernel '/usr/lib/xen/boot/hvmloader')(vcpus 1)(boot c)(cdrom '/root/boot.iso')(acpi 1)(usb 1)(parallel none)(serial (/dev/ttyS0 /dev/ttyS1))(device_model '/usr/lib64/xen/bin/qemu-dm')(vnc 1)))(device (vbd (dev 'ioemu:hda')(uname 'file:/root/foo.img')(mode 'w')))(device (vif (mac '00:16:3e:1b:b1:47')(bridge 'xenbr0')(script 'vif-bridge')(type ioemu))))
diff --git a/tests/sexpr2xmldata/sexpr2xml-fv-serial-dev-2-ports.xml b/tests/sexpr2xmldata/sexpr2xml-fv-serial-dev-2-ports.xml
new file mode 100644
index 0000000..783cd67
--- /dev/null
+++ b/tests/sexpr2xmldata/sexpr2xml-fv-serial-dev-2-ports.xml
@@ -0,0 +1,53 @@
+<domain type='xen' id='1'>
+ <name>fvtest</name>
+ <uuid>b5d70dd2-75cd-aca5-1776-9660b059d8ff</uuid>
+ <memory>409600</memory>
+ <currentMemory>409600</currentMemory>
+ <vcpu>1</vcpu>
+ <os>
+ <type>hvm</type>
+ <loader>/usr/lib/xen/boot/hvmloader</loader>
+ <boot dev='hd'/>
+ </os>
+ <features>
+ <acpi/>
+ </features>
+ <clock offset='utc'/>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>restart</on_crash>
+ <devices>
+ <emulator>/usr/lib64/xen/bin/qemu-dm</emulator>
+ <disk type='file' device='disk'>
+ <driver name='file'/>
+ <source file='/root/foo.img'/>
+ <target dev='hda' bus='ide'/>
+ </disk>
+ <disk type='file' device='cdrom'>
+ <driver name='file'/>
+ <source file='/root/boot.iso'/>
+ <target dev='hdc' bus='ide'/>
+ <readonly/>
+ </disk>
+ <interface type='bridge'>
+ <mac address='00:16:3e:1b:b1:47'/>
+ <source bridge='xenbr0'/>
+ <script path='vif-bridge'/>
+ <target dev='vif1.0'/>
+ </interface>
+ <serial type='dev'>
+ <source path='/dev/ttyS0'/>
+ <target port='0'/>
+ </serial>
+ <serial type='dev'>
+ <source path='/dev/ttyS1'/>
+ <target port='1'/>
+ </serial>
+ <console type='dev'>
+ <source path='/dev/ttyS0'/>
+ <target port='0'/>
+ </console>
+ <input type='mouse' bus='ps2'/>
+ <graphics type='vnc' port='5901' autoport='no'/>
+ </devices>
+</domain>
diff --git a/tests/sexpr2xmltest.c b/tests/sexpr2xmltest.c
index f100dd8..4b5766d 100644
--- a/tests/sexpr2xmltest.c
+++ b/tests/sexpr2xmltest.c
@@ -158,6 +158,7 @@ mymain(int argc, char **argv)
DO_TEST("fv-serial-null", "fv-serial-null", 1);
DO_TEST("fv-serial-file", "fv-serial-file", 1);
+ DO_TEST("fv-serial-dev-2-ports", "fv-serial-dev-2-ports", 1);
DO_TEST("fv-serial-stdio", "fv-serial-stdio", 1);
DO_TEST("fv-serial-pty", "fv-serial-pty", 1);
DO_TEST("fv-serial-pipe", "fv-serial-pipe", 1);
diff --git a/tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.cfg b/tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.cfg
new file mode 100644
index 0000000..86e7998
--- /dev/null
+++ b/tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.cfg
@@ -0,0 +1,25 @@
+name = "XenGuest2"
+uuid = "c7a5fdb2-cdaf-9455-926a-d65c16db1809"
+maxmem = 579
+memory = 394
+vcpus = 1
+builder = "hvm"
+kernel = "/usr/lib/xen/boot/hvmloader"
+boot = "d"
+pae = 1
+acpi = 1
+apic = 1
+localtime = 0
+on_poweroff = "destroy"
+on_reboot = "restart"
+on_crash = "restart"
+device_model = "/usr/lib/xen/bin/qemu-dm"
+sdl = 0
+vnc = 1
+vncunused = 1
+vnclisten = "127.0.0.1"
+vncpasswd = "123poi"
+disk = [ "phy:/dev/HostVG/XenGuest2,hda,w", "file:/root/boot.iso,hdc:cdrom,r" ]
+vif = [ "mac=00:16:3e:66:92:9c,bridge=xenbr1,script=vif-bridge,model=e1000,type=ioemu" ]
+parallel = "none"
+serial = [ "/dev/ttyS0", "/dev/ttyS1" ]
diff --git a/tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.xml b/tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.xml
new file mode 100644
index 0000000..e4d3f16
--- /dev/null
+++ b/tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.xml
@@ -0,0 +1,55 @@
+<domain type='xen'>
+ <name>XenGuest2</name>
+ <uuid>c7a5fdb2-cdaf-9455-926a-d65c16db1809</uuid>
+ <memory>592896</memory>
+ <currentMemory>403456</currentMemory>
+ <vcpu>1</vcpu>
+ <os>
+ <type arch='i686' machine='xenfv'>hvm</type>
+ <loader>/usr/lib/xen/boot/hvmloader</loader>
+ <boot dev='cdrom'/>
+ </os>
+ <features>
+ <acpi/>
+ <apic/>
+ <pae/>
+ </features>
+ <clock offset='utc'/>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>restart</on_crash>
+ <devices>
+ <emulator>/usr/lib/xen/bin/qemu-dm</emulator>
+ <disk type='block' device='disk'>
+ <driver name='phy'/>
+ <source dev='/dev/HostVG/XenGuest2'/>
+ <target dev='hda' bus='ide'/>
+ </disk>
+ <disk type='file' device='cdrom'>
+ <driver name='file'/>
+ <source file='/root/boot.iso'/>
+ <target dev='hdc' bus='ide'/>
+ <readonly/>
+ </disk>
+ <interface type='bridge'>
+ <mac address='00:16:3e:66:92:9c'/>
+ <source bridge='xenbr1'/>
+ <script path='vif-bridge'/>
+ <model type='e1000'/>
+ </interface>
+ <serial type='dev'>
+ <source path='/dev/ttyS0'/>
+ <target port='0'/>
+ </serial>
+ <serial type='dev'>
+ <source path='/dev/ttyS1'/>
+ <target port='1'/>
+ </serial>
+ <console type='dev'>
+ <source path='/dev/ttyS0'/>
+ <target port='0'/>
+ </console>
+ <input type='mouse' bus='ps2'/>
+ <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1' passwd='123poi'/>
+ </devices>
+</domain>
diff --git a/tests/xmconfigtest.c b/tests/xmconfigtest.c
index ea00747..0de890c 100644
--- a/tests/xmconfigtest.c
+++ b/tests/xmconfigtest.c
@@ -218,6 +218,7 @@ mymain(int argc, char **argv)
DO_TEST("fullvirt-usbtablet", 2);
DO_TEST("fullvirt-usbmouse", 2);
DO_TEST("fullvirt-serial-file", 2);
+ DO_TEST("fullvirt-serial-dev-2-ports", 2);
DO_TEST("fullvirt-serial-null", 2);
DO_TEST("fullvirt-serial-pipe", 2);
DO_TEST("fullvirt-serial-pty", 2);
diff --git a/tests/xml2sexprdata/xml2sexpr-fv-serial-dev-2-ports.sexpr b/tests/xml2sexprdata/xml2sexpr-fv-serial-dev-2-ports.sexpr
new file mode 100644
index 0000000..2048159
--- /dev/null
+++ b/tests/xml2sexprdata/xml2sexpr-fv-serial-dev-2-ports.sexpr
@@ -0,0 +1 @@
+(vm (name 'fvtest')(memory 400)(maxmem 400)(vcpus 1)(uuid 'b5d70dd2-75cd-aca5-1776-9660b059d8bc')(on_poweroff 'destroy')(on_reboot 'restart')(on_crash 'restart')(image (hvm (kernel '/usr/lib/xen/boot/hvmloader')(vcpus 1)(boot c)(cdrom '/root/boot.iso')(acpi 1)(usb 1)(parallel none)(serial (/dev/ttyS0 /dev/ttyS1))(device_model '/usr/lib64/xen/bin/qemu-dm')(vnc 1)))(device (vbd (dev 'ioemu:hda')(uname 'file:/root/foo.img')(mode 'w')))(device (vif (mac '00:16:3e:1b:b1:47')(bridge 'xenbr0')(script 'vif-bridge')(model 'e1000')(type ioemu))))
\ No newline at end of file
diff --git a/tests/xml2sexprdata/xml2sexpr-fv-serial-dev-2-ports.xml b/tests/xml2sexprdata/xml2sexpr-fv-serial-dev-2-ports.xml
new file mode 100644
index 0000000..e5d1817
--- /dev/null
+++ b/tests/xml2sexprdata/xml2sexpr-fv-serial-dev-2-ports.xml
@@ -0,0 +1,44 @@
+<domain type='xen'>
+ <name>fvtest</name>
+ <uuid>b5d70dd275cdaca517769660b059d8bc</uuid>
+ <os>
+ <type>hvm</type>
+ <loader>/usr/lib/xen/boot/hvmloader</loader>
+ <boot dev='hd'/>
+ </os>
+ <memory>409600</memory>
+ <vcpu>1</vcpu>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>restart</on_crash>
+ <features>
+ <acpi/>
+ </features>
+ <devices>
+ <emulator>/usr/lib64/xen/bin/qemu-dm</emulator>
+ <interface type='bridge'>
+ <source bridge='xenbr0'/>
+ <mac address='00:16:3e:1b:b1:47'/>
+ <script path='vif-bridge'/>
+ <model type='e1000'/>
+ </interface>
+ <disk type='file' device='cdrom'>
+ <source file='/root/boot.iso'/>
+ <target dev='hdc'/>
+ <readonly/>
+ </disk>
+ <disk type='file'>
+ <source file='/root/foo.img'/>
+ <target dev='ioemu:hda'/>
+ </disk>
+ <serial type='dev'>
+ <source path='/dev/ttyS0'/>
+ <target port='0'/>
+ </serial>
+ <serial type='dev'>
+ <source path='/dev/ttyS1'/>
+ <target port='1'/>
+ </serial>
+ <graphics type='vnc' port='5917' keymap='ja'/>
+ </devices>
+</domain>
diff --git a/tests/xml2sexprtest.c b/tests/xml2sexprtest.c
index 8a5d115..ed10dec 100644
--- a/tests/xml2sexprtest.c
+++ b/tests/xml2sexprtest.c
@@ -148,6 +148,7 @@ mymain(int argc, char **argv)
DO_TEST("fv-serial-null", "fv-serial-null", "fvtest", 1);
DO_TEST("fv-serial-file", "fv-serial-file", "fvtest", 1);
+ DO_TEST("fv-serial-dev-2-ports", "fv-serial-dev-2-ports", "fvtest", 1);
DO_TEST("fv-serial-stdio", "fv-serial-stdio", "fvtest", 1);
DO_TEST("fv-serial-pty", "fv-serial-pty", "fvtest", 1);
DO_TEST("fv-serial-pipe", "fv-serial-pipe", "fvtest", 1);
--
1.7.3.2
13 years, 10 months
[libvirt] [PATCH 1/2] build-sys: fix build when daemon is disabled by not installing libvirtd.8
by Diego Elio Pettenò
Since the rule to build libvirtd.8 is within the WITH_LIBVIRTD conditional,
so declare the man page in there as well. Without this change, build
without daemon will fail.
---
.gnulib | 2 +-
daemon/Makefile.am | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/.gnulib b/.gnulib
index 1629006..11fbc57 160000
--- a/.gnulib
+++ b/.gnulib
@@ -1 +1 @@
-Subproject commit 1629006348e1f66f07ce3ddcf3ebd2d14556cfce
+Subproject commit 11fbc57405a118e6ec9a3ebc19bbf5ececdae4d6
diff --git a/daemon/Makefile.am b/daemon/Makefile.am
index 963d64f..dbf0ac3 100644
--- a/daemon/Makefile.am
+++ b/daemon/Makefile.am
@@ -41,12 +41,12 @@ EXTRA_DIST = \
$(AVAHI_SOURCES) \
$(DAEMON_SOURCES)
-man_MANS = libvirtd.8
-
BUILT_SOURCES =
if WITH_LIBVIRTD
+man_MANS = libvirtd.8
+
sbin_PROGRAMS = libvirtd
confdir = $(sysconfdir)/libvirt/
--
1.7.2
13 years, 10 months
[libvirt] draft ~ l10n/i18n
by Zdenek Styblik
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello,
this is a draft of libvirt l10n/i18n translator's how-to. It is nowhere
definite and it actually is meant ...
It's practically summarized what we've talked about in last couple days.
~~~ DRAFT ~~~
# How-to libvirt l10n/i18n
We are glad you've decided to help with
localization/internationalization of libvirt. Before you do anything
else, stop!
Please, pay attention to following lines to save yourself from eventual
pitfalls.
'.po' files located in this directory are synchronized from Fedora
Project[https://translate.fedoraproject.org/projects/p/libvirt/], thus
it makes little sense to start translating them.
Here are two ways how you can translate and contribute:
## Optimal way
1st step: Create a "Fedora Project" account:
https://admin.fedoraproject.org/accounts/
(New Account, etc)
2nd step: Sign in to the libvirt transifex project
https://translate.fedoraproject.org/projects/p/libvirt/
It uses the just created Fedora Project account
3rd step: "Request to be a translator"
Once you've signed in with step 3, there's a button under the
"Translation files" heading that says something like "Request to
become a translator". Press that.
This is going to take some time.
4th step: Download '.po' file
'.po' file can be downloaded at
https://translate.fedoraproject.org/projects/p/libvirt/
5th step: Translate
See translator's tools section.
6th step: Upload translated file
!!! This point is still a mystery !!!
Upload modified file via web interface.
## Alternate way
If for some reason you don't want to or can't register at Fedora
Project, you still can translate and contribute to libvirt.
1st step: Get '.po' file
Download '.po' file from
https://translate.fedoraproject.org/projects/p/libvirt/ with language
you're going to translate to.
Make a backup copy of it
2nd step: Translate
See translator's tools section.
3rd step: Make a diff
Make a % diff; of the original file and the one you've translated.
eg. % diff -urN lang.po.org lang.po > lang.po.patch;
Send patch file back to mailing-list and somebody from the team
is going to push it at Fedora Project.
Why diff? Because it's easier to validate the work you've done,
solve eventual conflicts etc.
However, this approach has its downsides. First is it brings more
workload to libvirt team, second is '.po' file can change in the
meantime, because you are not able to "lock it" while you're working at
translations.
## Translator's tools
* KAider KDE4 ~ seems to be dead
* gtranslator ~ http://projects.gnome.org/gtranslator/
* poedit ~ http://www.poedit.net/
In case '.po' file in upstream got changed and you need to sync your
current work with upstream, you can try your luck with tool written in
Perl > http://www.zeratul.org/git/?p=scripts/perl/po-sync/.git;a=summary
~~~ DRAFT ~~~
Have a nice weekend,
Z.
- --
Zdenek Styblik
Net/Linux admin
OS TurnovFree.net
email: stybla(a)turnovfree.net
jabber: stybla(a)jabber.turnovfree.net
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk1DFJ4ACgkQ8MreUbSH7inLvQCeOg3CXKgxkdMz8EKlgQL8hSqK
F6gAoI2LbWBPL2WQir0tW2wEjm5NeSlr
=/2qM
-----END PGP SIGNATURE-----
13 years, 10 months
[libvirt] fork of php-libvirt
by Lyre
I've added many APIs to php-libvirt, including network, node device,
interface, and snapshot support.
Unfortunately, I wasn't able to contact original author Radek, I really hope
he can see this.
So I forked it, the address is: https://github.com/4179e1/php-libvirt
But there's something undone, as a new php extension writer, I don't know
how the documents are generated. Any clues are appreciated.
BTW, I've pack php-libvirt into rpm via opensuse build service, currently:
it's ready on openSuSE 11.3 & SLES 11 SP1; fedora 14 should works too (it
works on my VM), but the obs environment is not ready yet; and there's
something need to workaround on rhel6. check here:
http://download.opensuse.org/repositories/home:/midmay/
13 years, 10 months
[libvirt] [PATCH 0/2] fix some bugs in libvirtd
by Wen Congyang
Steps to reproduce this bug:
1. service libvirtd start
2. virsh start <domain>
3. kill -STOP $(cat /var/run/libvirt/qemu/<domain>.pid)
4. service libvirtd restart
5. kill -9 $(cat /var/run/libvirt/qemu/<domain>.pid)
Then libvirtd will core dump or be in deadlock state.
Make sure that json is built into libvirt and the version
of qemu is newer than 0.13.0.
Wen Congyang (2):
avoid vm to be deleted if qemuConnectMonitor failed
avoid closing monitor twice
src/qemu/qemu_driver.c | 31 ++++++++++++++++++++++---------
src/qemu/qemu_monitor.c | 10 ++++++++++
2 files changed, 32 insertions(+), 9 deletions(-)
13 years, 11 months
[libvirt] libvirt 0.8.7 LOCALSTATEDIR ubuntu patch
by Philipp Schmid
Hi,
I'm using ubuntu for our libvirt/kvm host server and needed IPv6 connectivity, so I started to update the latest ubuntu libvirt package (0.8.5) to 0.8.7.
I got all but one ubuntu specific patch to apply. The patch moves the ebiptables script from /tmp to "LOCALSTATEDIR" /lib/libvirt.
I renamed LOCAL_STATE_DIR in the patch below to LOCALSTATEDIR, because this seems to have changed between 0.8.5 and 0.8.7, but I still get the following compile error.
Since this is my first contact with the libvirt source or build system, I would be happy for any pointers on how to fix this and make LOCALSTATEDIR visible to nwfilter/nwfilter_ebiptables_driver.c.
Best regards,
Philipp Schmid
PS: if anyone is interested in working (at least for me with kvm) packages (without the mentioned patch), you can grab them here: http://www.schmidp.com/public/libvirt_0.8.7_ubuntu_natty/
-Wall -Wformat -Wformat-security -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wextra -Wshadow -Wcast-align -Wwrite-strings -Waggregate-return -Wstrict-prototypes -Winline -Wredundant-decls -Wno-sign-compare -Wlogical-op -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fasynchronous-unwind-tables -fdiagnostics-show-option -DIN_LIBVIRT -I../src/conf -g -O2 -g -O2 -c nwfilter/nwfilter_ebiptables_driver.c -fPIC -DPIC -o .libs/libvirt_driver_nwfilter_la-nwfilter_ebiptables_driver.o
nwfilter/nwfilter_ebiptables_driver.c: In function 'ebiptablesWriteToTempFile':
nwfilter/nwfilter_ebiptables_driver.c:2444:23: error: 'LOCALSTATEDIR' undeclared (first use in this function)
nwfilter/nwfilter_ebiptables_driver.c:2444:23: note: each undeclared identifier is reported only once for each function it appears in
nwfilter/nwfilter_ebiptables_driver.c:2444:37: error: expected ',' or ';' before string constant
make[4]: *** [libvirt_driver_nwfilter_la-nwfilter_ebiptables_driver.lo] Error 1
make[4]: Leaving directory `/tmp/buildd/libvirt-0.8.7/src'
make[3]: *** [all] Error 2
make[3]: Leaving directory `/tmp/buildd/libvirt-0.8.7/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/tmp/buildd/libvirt-0.8.7'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/tmp/buildd/libvirt-0.8.7'
make: *** [debian/stamp-makefile-build] Error 2
#########
Author: Jamie Strandboge <jamie(a)canonical.com>
Description: move ebiptables script from /tmp to /var/lib/libvirt
Forwarded: yes
Index: libvirt-0.8.7/src/nwfilter/nwfilter_ebiptables_driver.c
===================================================================
--- libvirt-0.8.7.orig/src/nwfilter/nwfilter_ebiptables_driver.c 2011-01-30 20:57:49.132301999 +0000
+++ libvirt-0.8.7/src/nwfilter/nwfilter_ebiptables_driver.c 2011-01-30 20:58:35.762302000 +0000
@@ -2441,7 +2441,7 @@
*/
static char *
ebiptablesWriteToTempFile(const char *string) {
- char filename[] = "/tmp/virtdXXXXXX";
+ char filename[] = LOCAL_STATE_DIR "/lib/libvirt/virtdXXXXXX";
int len;
char *filnam;
virBuffer buf = VIR_BUFFER_INITIALIZER;
13 years, 11 months
Re: [libvirt] Rudimentary (basic) s390x architecture functions for libvirt
by Patrick Siegl
A few more details for s390x: why you can't set param '-S' and need
'-chardev vc,id=cons -device virtio-serial-s390 -device
virtconsole,chardev=cons' on s390x:
1) qemu-system-s390x -M s390-virtio -vnc :0 -enable-kvm -smp 1 -m 1024
-k de -kernel /boot/image-2.6.34-tue01 -initrd
/boot/initrd-2.6.34-tue01_GUEST -drive file=/data/sle11.img -append
"root=/dev/vda1 rw"
=> screenshot 1
2) qemu-system-s390x -S -M s390-virtio -vnc :0 -enable-kvm -smp 1 -m
1024 -k de -kernel /boot/image-2.6.34-tue01 -initrd
/boot/initrd-2.6.34-tue01_GUEST -drive file=/data/sle11.img -append
"root=/dev/vda1 rw"
=> screenshot 2
3) qemu-system-s390x -M s390-virtio -vnc :0 -enable-kvm -smp 1 -m 1024
-k de -kernel /boot/image-2.6.34-tue01 -initrd
/boot/initrd-2.6.34-tue01_GUEST -drive file=/data/sle11.img -append
"root=/dev/vda1 rw" -chardev vc,id=cons -device virtio-serial-s390
-device virtconsole,chardev=cons
=> RUN
4) qemu-system-s390x -S -M s390-virtio -vnc :0 -enable-kvm -smp 1 -m
1024 -k de -kernel /boot/image-2.6.34-tue01 -initrd
/boot/initrd-2.6.34-tue01_GUEST -drive file=/data/sle11.img -append
"root=/dev/vda1 rw" -chardev vc,id=cons -device virtio-serial-s390
-device virtconsole,chardev=cons
=> screenshot 4
Regards,
Patrick Siegl
Am 25.01.2011 19:37, schrieb Justin Clift:
> On 26/01/2011, at 5:11 AM, Patrick Siegl wrote:
>> <screenshot_paramS.png>
> Interestingly, I'm guessing that's the QEMU "monitor console".
>
> Apparently it's a key feature of QEMU, but it's not something I've personally had
> anything to do with (yet). :)
>
> Just mentioning, in case it's a useful thought. The guys on the mailing list
> have a lot deeper knowledge about this stuff that me. ;)
>
> Regards and best wishes,
>
> Justin Clift
13 years, 11 months
