September 2010 - Devel - libvirt List Archives

[libvirt] [Patch v3 0/5] nwfilter: Support comment attribute in filter rule descriptions
by Stefan Berger 30 Sep '10

30 Sep '10

V3: - moved MAX_COMMENT_LENGTH #define into include file (1/5) - renamed IPTABLES_MAX_COMMENT_SIZE to IPTABLES_MAX_COMMENT_LENGTH (2/5) - removal of regex from string patter in schema for comment attribute (3/5) - added libvirt version since when comment attribute is available (4/5) - added test cases (5/5) V2: - work on the iptables instantiation patch (2/5) - work on the parser patch (1/5) - small changes to the test cases (5/5) The following patch series adds support for a comment node to the XML attributes of all protocols. If possible, as for example in case of iptables, the comments are instantiated (iptables ... -m comment --comment ...). The patches do the following: - extend the parser and XML generator to parse and create XML with the comment attribute - instantiate the comment in case of ip(6)tables - extend the nwfilter.rng schema with the comment attribute - add the information to the web docs - add a test case for the XML parser/generator to be run during 'make check' Regards, Stefan

3 7

[libvirt] [PATCH] autogen: allow aclocal to receive arguments via an environment variable
by Justin Clift 30 Sep '10

30 Sep '10

On Mac OS X, the "Homebrew" build system (one of the three main ones) has its m4 macro directory placed in a user configurable location. This patch adds a simple way to pass this configuration information to aclocal, using an environment variable called ACLOCAL_FLAGS. This allows the packaging of libvirt into the Homebrew build system. ie: $ export ACLOCAL_FLAGS="-I /path/to/m4/macro/dir/" --- Although this patch works, I'm kind of expecting Eric will have a better way of achieving what this is trying to do, so this will get NACKed. No stress. :) README-hacking | 6 ++++++ bootstrap | 2 +- 2 files changed, 7 insertions(+), 1 deletions(-) diff --git a/README-hacking b/README-hacking index 80b022c..74f3bed 100644 --- a/README-hacking +++ b/README-hacking @@ -33,6 +33,12 @@ reduce download time and disk space requirements: $ export GNULIB_SRCDIR=/path/to/gnulib +Also, if you have M4 macro files (.m4) in a non-standard location, +you can include them in the build process with the ACLOCAL_FLAGS +environment variable: + + $ export ACLOCAL_FLAGS="-I /path/to/extra/macro/dir" + The next step is to get all required pieces from gnulib, to run autoreconf, and to invoke ./configure: diff --git a/bootstrap b/bootstrap index 2422549..593e0b2 100755 --- a/bootstrap +++ b/bootstrap @@ -775,7 +775,7 @@ grep -E '^[ ]*AC_CONFIG_HEADERS?\>' configure.ac >/dev/null || for command in \ libtool \ - "${ACLOCAL-aclocal} --force -I m4" \ + "${ACLOCAL-aclocal} --force -I m4 ${ACLOCAL_FLAGS}" \ "${AUTOCONF-autoconf} --force" \ "${AUTOHEADER-autoheader} --force" \ "${AUTOMAKE-automake} --add-missing --copy --force-missing" -- 1.7.2.1

2 1

[libvirt] [PATCH V2] Rework configure logic for virtualport support
by Stefan Berger 29 Sep '10

29 Sep '10

V2: - added missing AC_ARG_WITH() for --with-virtualport In this patch I am reworking the logic around detecting virtual port support and requiring the libnl dependency. - It requires --with-macvtap and displays an error in case of --without-macvtap --with-virtualport. - It tests for availability of certain data in include files and displays an error in case the include file is not at the correct level and --with-virtualport was chosen - displays 'checking' messages for macvtap and virtualport support and results - libnl support is required when macvtap is found or requested; if libnl is not there, please supply without-macvtap Signed-off-by: Stefan Berger <stefanb(a)us.ibm.com> diff --git a/configure.ac b/configure.ac index 6100610..da38b8b 100644 --- a/configure.ac +++ b/configure.ac @@ -2058,6 +2058,7 @@ AC_ARG_WITH([macvtap], [with_macvtap=${withval}], [with_macvtap=check]) +AC_MSG_CHECKING([whether to compile with macvtap support]) if test "$with_macvtap" != "no" ; then AC_TRY_COMPILE([ #include <sys/socket.h> #include <linux/rtnetlink.h> ], @@ -2075,19 +2076,35 @@ if test "$with_macvtap" != "no" ; then AC_DEFINE_UNQUOTED([WITH_MACVTAP], $val, [whether macvtap support is enabled]) fi AM_CONDITIONAL([WITH_MACVTAP], [test "$with_macvtap" = "yes"]) +AC_MSG_RESULT([$with_macvtap]) -AC_TRY_COMPILE([ #include <sys/socket.h> - #include <linux/rtnetlink.h> ], - [ int x = IFLA_PORT_MAX; ], - [ with_virtualport=yes ], - [ with_virtualport=no ]) -if test "$with_virtualport" = "yes"; then - val=1 -else - val=0 +AC_ARG_WITH([virtualport], + AC_HELP_STRING([--with-virtualport],[enable virtual port support @<:@default=check@:>@]), + [with_virtualport=${withval}], + [with_virtualport=check]) + +if test "$with_virtualport" != "no"; then + if test "$with_macvtap" = "no"; then + AC_MSG_ERROR([--with-virtualport requires --with-macvtap]) + fi + AC_MSG_CHECKING([whether to compile with virtual port support]) + AC_TRY_COMPILE([ #include <sys/socket.h> + #include <linux/rtnetlink.h> ], + [ int x = IFLA_PORT_MAX; ], + [ with_virtualport=yes ], + [ if test "$with_virtualport" = "yes" ; then + AC_MSG_ERROR([Installed linux headers don't show support for virtual port support.]) + fi + with_virtualport=no ]) + if test "$with_virtualport" = "yes"; then + val=1 + else + val=0 + fi + AC_DEFINE_UNQUOTED([WITH_VIRTUALPORT], $val, + [whether vsi vepa support is enabled]) + AC_MSG_RESULT([$with_virtualport]) fi -AC_DEFINE_UNQUOTED([WITH_VIRTUALPORT], $val, - [whether vsi vepa support is enabled]) AM_CONDITIONAL([WITH_VIRTUALPORT], [test "$with_virtualport" = "yes"]) @@ -2096,7 +2113,7 @@ dnl netlink library LIBNL_CFLAGS="" LIBNL_LIBS="" -if test "$with_macvtap" = "yes" || test "$with_virtualport" = "yes"; then +if test "$with_macvtap" = "yes"; then PKG_CHECK_MODULES([LIBNL], [libnl-1 >= $LIBNL_REQUIRED], [ ], [ AC_MSG_ERROR([libnl >= $LIBNL_REQUIRED is required for macvtap support])

3 9

[libvirt] [PATCH] mpath: disable devmapper-multipath checking on non-linux
by Justin Clift 29 Sep '10

29 Sep '10

The configure script was breaking on MacOS X unless passed: --without-storage-mpath This patch leverages Stefan Bergers earlier work for nwfilter, so non-linux systems don't even attempt to build multipath. --- configure.ac | 18 +++++++++--------- 1 files changed, 9 insertions(+), 9 deletions(-) diff --git a/configure.ac b/configure.ac index 8dcd756..ee6f9b1 100644 --- a/configure.ac +++ b/configure.ac @@ -1503,7 +1503,15 @@ if test "$with_storage_scsi" = "check"; then fi AM_CONDITIONAL([WITH_STORAGE_SCSI], [test "$with_storage_scsi" = "yes"]) -if test "$with_storage_mpath" = "check"; then +with_linux=no +case "$host" in + *-*-linux*) + with_linux=yes + ;; +esac +AM_CONDITIONAL([WITH_LINUX], [test "$with_linux" = "yes"]) + +if test "$with_storage_mpath" = "check" && test "$with_linux" = "yes"; then with_storage_mpath=yes AC_DEFINE_UNQUOTED([WITH_STORAGE_MPATH], 1, @@ -2022,14 +2030,6 @@ then fi AM_CONDITIONAL([WITH_NODE_DEVICES], [test "$with_nodedev" = "yes"]) -with_linux=no -case "$host" in - *-*-linux*) - with_linux=yes - ;; -esac -AM_CONDITIONAL([WITH_LINUX], [test "$with_linux" = "yes"]) - with_nwfilter=yes if test "$with_libvirtd" = "no" || test "$with_linux" != "yes"; then -- 1.7.3

2 2

[libvirt] [PATCH] autogen: added glibtool and pkg-config checks
by Justin Clift 29 Sep '10

29 Sep '10

OSX MacPorts has libtool named as glibtool, with libtoolize named as glibtoolize. This patch adds support for this, and also adds a check for pkg-config, to warn when it is missing. --- autogen.sh | 25 ++++++++++++++++++++----- 1 files changed, 20 insertions(+), 5 deletions(-) diff --git a/autogen.sh b/autogen.sh index 01ba59c..810a189 100755 --- a/autogen.sh +++ b/autogen.sh @@ -25,11 +25,18 @@ DIE=0 } (libtool --version) < /dev/null > /dev/null 2>&1 || { - echo - echo "You must have libtool installed to compile libvirt." - echo "Download the appropriate package for your distribution," - echo "or see http://www.gnu.org/software/libtool" - DIE=1 + # GNU libtool wasn't found as "libtool", + # so we check if it's known as "glibtool" + (glibtool --version) < /dev/null > /dev/null 2>&1 || { + echo + echo "You must have libtool installed to compile libvirt." + echo "Download the appropriate package for your distribution," + echo "or see http://www.gnu.org/software/libtool" + DIE=1 + } + # These are only used if glibtool is what we want + export LIBTOOL=glibtool + export LIBTOOLIZE=glibtoolize } (automake --version) < /dev/null > /dev/null 2>&1 || { @@ -40,6 +47,14 @@ DIE=0 echo "or see http://www.gnu.org/software/automake" } +(pkg-config --version) < /dev/null > /dev/null 2>&1 || { + echo + DIE=1 + echo "You must have pkg-config installed to compile libvirt." + echo "Download the appropriate package for your distribution," + echo "or see http://pkg-config.freedesktop.org" +} + if test "$DIE" -eq 1; then exit 1 fi -- 1.7.2.2

3 9

[libvirt] RFC: add <currentVcpu> element
by Eric Blake 29 Sep '10

29 Sep '10

Some hypervisors have the ability to hot-plug VCPUs exposed to the guest. Right now, libvirt XML only has the ability to describe the total number of vcpus assigned to a domain (the <vcpu> element under <domain>). It has the following APIs: virConnectGetMaxVcpus - provide maximum that host can assign to guests virDomainGetMaxVcpus - if domain is active, then max it was booted with; if inactive, then same as virConnectGetMaxVcpus virDomainSetVcpus - change current vcpus assigned to domain; active domain only virDomainPinVcpu - control how vcpus are pinned; active domain only virDomainGetVcpus - detailed map of how vcpus are mapped to host cpus And virsh has these commands: setvcpus - maps to virDomainSetVcpus vcpuinfo - maps to virDomainGetVcpus vcpupin - maps to virDomainPinVcpu https://bugzilla.redhat.com/show_bug.cgi?id=545118 describes the use case of booting a Xen HV with one value set for the maximum vcpu count, but another value for the current count. Technically, this can already be approximated by calling virDomainSetVcpus immediately after the guest is booted, but that can be resource-intensive, compared to the alternative of using xen's command line options to boot with a smaller current value than the maximum, and only later hot-plugging additional vcpus when needed (up to the maximum set at boot time). And it is not persistent, so the extra vcpus must be manually unplugged every boot. At the XML layer, I'm proposing the addition of a new element <currentVcpu>: <domain ...> <vcpu>2</vcpu> <currentVcpu>1</vcpu> ... If absent, then we keep the status quo of starting the domain with the same number of vcpus as the maximum. If present, it must be between 1 and <vcpu> inclusive (where supported, and exactly <vcpu> for hypervisors that lack vcpu hot-plug support), and dumping the xml of a domain will update the element to match virDomainSetVcpus; this provides the persistence aspect, and allows domain startup to take advantage of any command line options to start with a reduced current vcpu count rather than having to unplug vcpus after the fact. At the library API layer, I plan on adding: virDomainSetMaxVcpus - alter the <vcpu> xml aspect of a domain for next boot; only affects persistent state virDomainSetVcpusFlags - alter the <currentVcpu> xml aspect of a domain, with a flag to state whether the change is persistent (inactive domains or affecting next boot of active domain) or live (active domains only). and altering: virDomainSetVcpus - can additionally be used on inactive domains to affect next boot; no change to active semantics, basically now a wrapper for virDomainSetVcpusFlags(,0) virDomainGetMaxVcpus - on inactive domains, this value now matches the <vcpu> setting rather than blindly matching virConnectGetMaxVcpus I think that the existing virDomainGetVcpus is adequate for determining the number of current vcpus in an active domain. Any other API changes that you think might be necessary? Finally, at the virsh layer, I plan on: vcpuinfo: add --count flag; if flag is present, then inactive domains show current and max vcpus rather than erroring out, and active domains add current and max vcpu information to the overall output setvcpus: add --max and --persistent flags; without flags, this still maps to virDomainSetVcpus and only affects active domains; with --max, it maps to virDomainSetMaxVcpus, with --persistent, it maps to virDomainSetVcpusFlags Any thoughts on this plan of attack before I start submitting code patches? -- Eric Blake eblake(a)redhat.com +1-801-349-2682 Libvirt virtualization library http://libvirt.org

2 12

[libvirt] [PATCH] Rework configure logic for virtualport support
by Stefan Berger 28 Sep '10

28 Sep '10

In this patch I am reworking the logic around detecting virtual port support and requiring the libnl dependency. - It requires --with-macvtap and displays an error in case of --without-macvtap --with-virtualport. - It tests for availability of certain data in include files and displays an error in case the include file is not at the correct level and --with-virtualport was chosen - displays 'checking' messages for macvtap and virtualport support and results - libnl support is required when macvtap is found or requested; if libnl is not there, please supply without-macvtap Signed-off-by: Stefan Berger <stefanb(a)us.ibm.com> diff --git a/configure.ac b/configure.ac index 6100610..d94b510 100644 --- a/configure.ac +++ b/configure.ac @@ -2058,6 +2058,7 @@ AC_ARG_WITH([macvtap], [with_macvtap=${withval}], [with_macvtap=check]) +AC_MSG_CHECKING([whether to compile with macvtap support]) if test "$with_macvtap" != "no" ; then AC_TRY_COMPILE([ #include <sys/socket.h> #include <linux/rtnetlink.h> ], @@ -2075,19 +2076,31 @@ if test "$with_macvtap" != "no" ; then AC_DEFINE_UNQUOTED([WITH_MACVTAP], $val, [whether macvtap support is enabled]) fi AM_CONDITIONAL([WITH_MACVTAP], [test "$with_macvtap" = "yes"]) +AC_MSG_RESULT([$with_macvtap]) -AC_TRY_COMPILE([ #include <sys/socket.h> - #include <linux/rtnetlink.h> ], - [ int x = IFLA_PORT_MAX; ], - [ with_virtualport=yes ], - [ with_virtualport=no ]) -if test "$with_virtualport" = "yes"; then - val=1 -else - val=0 +val=0 +if test "$with_virtualport" != "no"; then + if test "$with_macvtap" = "no"; then + AC_MSG_ERROR([--with-virtualport requires --with-macvtap]) + fi + AC_MSG_CHECKING([whether to compile with virtual port support]) + AC_TRY_COMPILE([ #include <sys/socket.h> + #include <linux/rtnetlink.h> ], + [ int x = IFLA_PORT_MAX; ], + [ with_virtualport=yes ], + [ if test "$with_virtualport" = "yes" ; then + AC_MSG_ERROR([Installed linux headers don't show support for virtual port support.]) + fi + with_virtualport=no ]) + if test "$with_virtualport" = "yes"; then + val=1 + else + val=0 + fi + AC_DEFINE_UNQUOTED([WITH_VIRTUALPORT], $val, + [whether vsi vepa support is enabled]) + AC_MSG_RESULT([$with_virtualport]) fi -AC_DEFINE_UNQUOTED([WITH_VIRTUALPORT], $val, - [whether vsi vepa support is enabled]) AM_CONDITIONAL([WITH_VIRTUALPORT], [test "$with_virtualport" = "yes"]) @@ -2096,7 +2109,7 @@ dnl netlink library LIBNL_CFLAGS="" LIBNL_LIBS="" -if test "$with_macvtap" = "yes" || test "$with_virtualport" = "yes"; then +if test "$with_macvtap" = "yes"; then PKG_CHECK_MODULES([LIBNL], [libnl-1 >= $LIBNL_REQUIRED], [ ], [ AC_MSG_ERROR([libnl >= $LIBNL_REQUIRED is required for macvtap support])

2 2

[libvirt] [PATCH] mac os x: don't compile failing example program on 32 bit mac os x
by Justin Clift 28 Sep '10

28 Sep '10

This addresses a compilation failure issue reported last year on OS X: https://www.redhat.com/archives/libvir-list/2009-May/msg00166.html In testing here, the compilation only fails on 32 bit OS X, but works on 64 bit, even when using exact same compile and linking flags. This commit surgically disables compilation of this one example program on 32 bit Mac OS X (only). Compilation still occurs, with a working executable produced, on 64 bit Mac OS X. --- examples/domain-events/events-c/event-test.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/examples/domain-events/events-c/event-test.c b/examples/domain-events/events-c/event-test.c index 74eabba..3dff13b 100644 --- a/examples/domain-events/events-c/event-test.c +++ b/examples/domain-events/events-c/event-test.c @@ -5,7 +5,7 @@ #include <string.h> #include <signal.h> -#if HAVE_SYS_POLL_H +#if HAVE_SYS_POLL_H && !(defined(__i386__) && defined(__APPLE__) && defined(__MACH__)) # include <sys/types.h> # include <sys/poll.h> # include <libvirt/libvirt.h> -- 1.7.3

2 3

[libvirt] [PATCH] mac os x: use awk selected by build system rather than first in path
by Justin Clift 28 Sep '10

28 Sep '10

Prior to this patch, the ChangeLog generation was hard coded to use "awk", when it should have been using the AWK variable set by our build system. This breaks compilation on a newly installed OS X system, where the default path has the Mac (non GNU) awk in the default search PATH before any installed GNU awk (gawk). --- docs/Makefile.am | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/docs/Makefile.am b/docs/Makefile.am index 114ea1f..7fae40d 100644 --- a/docs/Makefile.am +++ b/docs/Makefile.am @@ -88,7 +88,7 @@ api: libvirt-api.xml libvirt-refs.xml web: $(dot_html) html/index.html devhelp/index.html ChangeLog.xml: ../ChangeLog ChangeLog.awk - awk -f ChangeLog.awk < $< > $@ + $(AWK) -f ChangeLog.awk < $< > $@ ChangeLog.html.in: ChangeLog.xml ChangeLog.xsl @if [ -x $(XSLTPROC) ] ; then \ -- 1.7.2.3

2 2

[libvirt] [PATCH v2] nwfilter: Don't compile nwfilter driver on other systems than Linux
by Stefan Berger 28 Sep '10

28 Sep '10

v2: check 'with_linux' rather than using uname -s for checking for target system Don't compile the nwfilter driver (instantiating the rules) on other systems than Linux. Signed-off-by: Stefan Berger <stefanb(a)us.ibm.com> diff --git a/configure.ac b/configure.ac index 23181dd..6100610 100644 --- a/configure.ac +++ b/configure.ac @@ -1360,15 +1360,6 @@ if test "$with_secrets" = "yes" ; then fi AM_CONDITIONAL([WITH_SECRETS], [test "$with_secrets" = "yes"]) -with_nwfilter=yes -if test "$with_libvirtd" = "no"; then - with_nwfilter=no -fi -if test "$with_nwfilter" = "yes" ; then - AC_DEFINE([WITH_NWFILTER], 1, [whether local network filter management driver is available]) -fi -AM_CONDITIONAL([WITH_NWFILTER], [test "$with_nwfilter" = "yes"]) - AC_ARG_WITH([storage-fs], AC_HELP_STRING([--with-storage-fs], [with FileSystem backend for the storage driver @<:@default=check@:>@]),[],[with_storage_fs=check]) @@ -2040,6 +2031,16 @@ esac AM_CONDITIONAL([WITH_LINUX], [test "$with_linux" = "yes"]) +with_nwfilter=yes +if test "$with_libvirtd" = "no" || test "$with_linux" != "yes"; then + with_nwfilter=no +fi +if test "$with_nwfilter" = "yes" ; then + AC_DEFINE([WITH_NWFILTER], 1, [whether local network filter management driver is available]) +fi +AM_CONDITIONAL([WITH_NWFILTER], [test "$with_nwfilter" = "yes"]) + + AC_ARG_WITH([qemu-user], AC_HELP_STRING([--with-qemu-user], [username to run QEMU system instance as @<:@default=root@:>@]), [QEMU_USER=${withval}],

3 6