[libvirt] [RFC] [PATCH 1/3] vepa+vsi: Introduce dependency on libnl
by Stefan Berger
This patch introduces a dependency on libnl, which subsequent patches
will then use.
Signed-off-by: Stefan Berger <stefanb(a)us.ibm.com>
Index: libvirt-acl/configure.ac
===================================================================
--- libvirt-acl.orig/configure.ac
+++ libvirt-acl/configure.ac
@@ -42,6 +42,7 @@ HAL_REQUIRED=0.5.0
DEVMAPPER_REQUIRED=1.0.0
LIBCURL_REQUIRED="7.18.0"
LIBPCAP_REQUIRED="1.0.0"
+LIBNL_REQUIRED="1.1"
dnl Checks for C compiler.
AC_PROG_CC
@@ -2005,6 +2006,24 @@ fi
AM_CONDITIONAL([WITH_MACVTAP], [test "$with_macvtap" = "yes"])
+dnl netlink library
+
+LIBNL_CFLAGS=""
+LIBNL_LIBS=""
+
+if test "$with_macvtap" = "yes"; then
+ PKG_CHECK_MODULES([LIBNL], [libnl-1 >= $LIBNL_REQUIRED], [
+ ], [
+ AC_MSG_ERROR([libnl >= $LIBNL_REQUIRED is required for macvtap support])
+ ])
+fi
+
+AC_SUBST([LIBNL_CFLAGS])
+AC_SUBST([LIBNL_LIBS])
+
+
+
+
# Only COPYING.LIB is under version control, yet COPYING
# is included as part of the distribution tarball.
# Copy one to the other, but only if this is a srcdir-build.
@@ -2183,6 +2202,11 @@ AC_MSG_NOTICE([ pcap: $LIBPCAP_CFLAGS
else
AC_MSG_NOTICE([ pcap: no])
fi
+if test "$with_macvtap" = "yes" ; then
+AC_MSG_NOTICE([ nl: $LIBNL_CFLAGS $LIBNL_LIBS])
+else
+AC_MSG_NOTICE([ nl: no])
+fi
AC_MSG_NOTICE([])
AC_MSG_NOTICE([Test suite])
AC_MSG_NOTICE([])
Index: libvirt-acl/libvirt.spec.in
===================================================================
--- libvirt-acl.orig/libvirt.spec.in
+++ libvirt-acl/libvirt.spec.in
@@ -63,6 +63,7 @@
%define with_yajl 0%{!?_without_yajl:0}
%define with_nwfilter 0%{!?_without_nwfilter:0}
%define with_libpcap 0%{!?_without_libpcap:0}
+%define with_macvtap 0%{!?_without_macvtap:0}
# Non-server/HV driver defaults which are always enabled
%define with_python 0%{!?_without_python:1}
@@ -153,6 +154,11 @@
%if %{with_qemu}
%define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}}
%define with_libpcap 0%{!?_without_libpcap:%{server_drivers}}
+%define with_macvtap 0%{!?_without_macvtap:%{server_drivers}}
+%endif
+
+%if %{with_macvtap}
+%define with_libnl 1
%endif
# Force QEMU to run as non-root
@@ -282,6 +288,9 @@ BuildRequires: yajl-devel
%if %{with_libpcap}
BuildRequires: libpcap-devel
%endif
+%if %{with_libnl}
+BuildRequires: libnl-devel
+%endif
%if %{with_avahi}
BuildRequires: avahi-devel
%endif
@@ -531,6 +540,10 @@ of recent versions of Linux (and other O
%define _without_libpcap --without-libpcap
%endif
+%if ! %{with_macvtap}
+%define _without_macvtap --without-macvtap
+%endif
+
%configure %{?_without_xen} \
%{?_without_qemu} \
%{?_without_openvz} \
@@ -560,6 +573,7 @@ of recent versions of Linux (and other O
%{?_without_udev} \
%{?_without_yajl} \
%{?_without_libpcap} \
+ %{?_without_macvtap} \
--with-qemu-user=%{qemu_user} \
--with-qemu-group=%{qemu_group} \
--with-init-script=redhat \
Index: libvirt-acl/src/Makefile.am
===================================================================
--- libvirt-acl.orig/src/Makefile.am
+++ libvirt-acl/src/Makefile.am
@@ -997,7 +997,7 @@ libvirt_la_LDFLAGS = $(VERSION_SCRIPT_FL
$(CYGWIN_EXTRA_LDFLAGS) $(MINGW_EXTRA_LDFLAGS)
libvirt_la_BUILT_LIBADD += ../gnulib/lib/libgnu.la
libvirt_la_LIBADD += $(LIBXML_LIBS) \
- $(LIBPCAP_LIBS) \
+ $(LIBPCAP_LIBS) $(LIBNL_LIBS) \
$(DRIVER_MODULE_LIBS) \
$(CYGWIN_EXTRA_LIBADD)
libvirt_la_CFLAGS = $(COVERAGE_CFLAGS) -DIN_LIBVIRT
@@ -1056,7 +1056,7 @@ libvirt_lxc_SOURCES = \
libvirt_lxc_LDFLAGS = $(WARN_CFLAGS) $(COVERAGE_LDFLAGS)
libvirt_lxc_LDADD = $(CAPNG_LIBS) $(YAJL_LIBS) \
$(LIBXML_LIBS) $(NUMACTL_LIBS) $(LIB_PTHREAD) \
- ../gnulib/lib/libgnu.la
+ $(LIBNL_LIBS) ../gnulib/lib/libgnu.la
libvirt_lxc_CFLAGS = \
$(LIBPARTED_CFLAGS) \
$(NUMACTL_CFLAGS) \
14 years, 7 months
[libvirt] VIR_ERROR and VIR_DEBUG normalization
by Jim Meyering
Most of the following changes have been induced automatically.
The few outliers done manually are marked as such.
[PATCH 01/10] maint: use VIR_ERROR0 rather than VIR_ERROR with a bare "%s"
[PATCH 02/10] maint: mark translatable string args of VIR_ERROR0
[PATCH 03/10] maint: mark translatable string args of VIR_ERROR
[PATCH 04/10] maint: VIR_ERROR/VIR_ERROR0: mark up the remaining ones manually
[PATCH 05/10] maint: more of same, but manual: convert VIR_ERROR("%s" to VIR_ERROR0(
[PATCH 06/10] maint: change "" in err ? err->message : "" to _("unknown error"), ...
[PATCH 07/10] maint: enforce policy wrt VIR_ERROR and VIR_ERROR0
[PATCH 08/10] maint: don't mark VIR_DEBUG or VIR_DEBUG0 diagnostics for translation
[PATCH 09/10] maint: enforce policy wrt VIR_DEBUG and VIR_DEBUG0
[PATCH 10/10] maint: update po/POTFILES.in
14 years, 7 months
[libvirt] [PATCH v2] qemu: Use ShutdownVMDaemon for all startup cleanup paths
by Cole Robinson
The current cleanup: in StartVMDaemon path is a poor duplication.
qemuShutdownVMDaemon can handle teardown for inactive VMs, so let's use it.
v2: Remove old abort: label, only use cleanup:
Signed-off-by: Cole Robinson <crobinso(a)redhat.com>
---
src/qemu/qemu_driver.c | 37 ++++++++++---------------------------
1 files changed, 10 insertions(+), 27 deletions(-)
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index d387e69..3823dbd 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -3516,29 +3516,29 @@ static int qemudStartVMDaemon(virConnectPtr conn,
DEBUG0("Waiting for monitor to show up");
if (qemudWaitForMonitor(driver, vm, pos) < 0)
- goto abort;
+ goto cleanup;
DEBUG0("Detecting VCPU PIDs");
if (qemuDetectVcpuPIDs(driver, vm) < 0)
- goto abort;
+ goto cleanup;
DEBUG0("Setting any required VM passwords");
if (qemuInitPasswords(conn, driver, vm, qemuCmdFlags) < 0)
- goto abort;
+ goto cleanup;
/* If we have -device, then addresses are assigned explicitly.
* If not, then we have to detect dynamic ones here */
if (!(qemuCmdFlags & QEMUD_CMD_FLAG_DEVICE)) {
DEBUG0("Determining domain device PCI addresses");
if (qemuInitPCIAddresses(driver, vm) < 0)
- goto abort;
+ goto cleanup;
}
DEBUG0("Setting initial memory amount");
qemuDomainObjEnterMonitorWithDriver(driver, vm);
if (qemuMonitorSetBalloon(priv->mon, vm->def->memory) < 0) {
qemuDomainObjExitMonitorWithDriver(driver, vm);
- goto abort;
+ goto cleanup;
}
if (migrateFrom == NULL) {
@@ -3549,7 +3549,7 @@ static int qemudStartVMDaemon(virConnectPtr conn,
qemuReportError(VIR_ERR_INTERNAL_ERROR,
"%s", _("resume operation failed"));
qemuDomainObjExitMonitorWithDriver(driver, vm);
- goto abort;
+ goto cleanup;
}
}
qemuDomainObjExitMonitorWithDriver(driver, vm);
@@ -3557,7 +3557,7 @@ static int qemudStartVMDaemon(virConnectPtr conn,
DEBUG0("Writing domain status to disk");
if (virDomainSaveStatus(driver->caps, driver->stateDir, vm) < 0)
- goto abort;
+ goto cleanup;
if (logfile != -1)
close(logfile);
@@ -3565,26 +3565,9 @@ static int qemudStartVMDaemon(virConnectPtr conn,
return 0;
cleanup:
- /* We jump here if we failed to start the VM for any reason
- * XXX investigate if we can kill this block and safely call
- * qemudShutdownVMDaemon even though no PID is running */
- qemuDomainReAttachHostDevices(driver, vm->def);
-
- if (driver->securityDriver &&
- driver->securityDriver->domainRestoreSecurityAllLabel)
- driver->securityDriver->domainRestoreSecurityAllLabel(vm, 0);
- if (driver->securityDriver &&
- driver->securityDriver->domainReleaseSecurityLabel)
- driver->securityDriver->domainReleaseSecurityLabel(vm);
- qemuRemoveCgroup(driver, vm, 1);
- if (logfile != -1)
- close(logfile);
- vm->def->id = -1;
- return -1;
-
-abort:
- /* We jump here if we failed to initialize the now running VM
- * killing it off and pretend we never started it */
+ /* We jump here if we failed to start the VM for any reason, or
+ * if we failed to initialize the now running VM. kill it off and
+ * pretend we never started it */
qemudShutdownVMDaemon(driver, vm, 0);
if (logfile != -1)
--
1.6.6.1
14 years, 7 months
[libvirt] [PATCH] daemon: A few initscript corrections
by Cole Robinson
Fedora bug https://bugzilla.redhat.com/show_bug.cgi?id=565238
- Avahi service is called 'avahi-daemon'
- chkconfig descriptions must use \ for line continuations
Signed-off-by: Cole Robinson <crobinso(a)redhat.com>
---
daemon/libvirtd.init.in | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/daemon/libvirtd.init.in b/daemon/libvirtd.init.in
index d4dc98b..809433e 100644
--- a/daemon/libvirtd.init.in
+++ b/daemon/libvirtd.init.in
@@ -9,7 +9,7 @@
# Should-Start: $named
# Should-Start: xend
# Should-Start: hal
-# Should-Start: avahi
+# Should-Start: avahi-daemon
# Required-Stop: $network messagebus
# Should-Stop: $named
# Default-Start: 3 4 5
@@ -24,8 +24,8 @@
# libvirtd: guest and virtual network management daemon
#
# chkconfig: 345 97 03
-# description: This is a daemon for managing guest instances
-# and libvirt virtual networks
+# description: This is a daemon for managing guest instances \
+# and libvirt virtual networks \
# See http://libvirt.org
#
# processname: libvirtd
--
1.6.6.1
14 years, 7 months
Re: [libvirt] libvirt and Ruby
by Chris Lalancette
On 05/20/2010 01:53 PM, Jaromír Červenka wrote:
> Hi Chris,
>
> thank you for your answer. That will be great! :) I decided that I
> will write this deamon with Ruby and with old ruby bindings at least,
> so this is good news for me :)
>
> My friend from suse (Michal Hrusecky) did two patches till now - one
> is for virNodeGetFreememory a the second implements
> virConnectGetLibVersion. He sent these patches to David Lutterkort,
> but without answer. Do you want them?
>
> Sorry for my EN :/
(please leave the list CC'ed; other people might be interested in the
status of the Ruby bindings).
Your English is just fine :). If you could send those patches to the libvirt
list (and CC me), that would be great; I also have commit access to the ruby
repository, so assuming they are OK I can add them.
Thanks,
--
Chris Lalancette
14 years, 7 months
[libvirt] [PATCH] qemu: Genericize tapfds/ntapfds
by Alex Williamson
There doesn't seem to be anything specific to tap devices for this
array of file descriptors which need to stay open of the guest to use.
Rename then for others to make use of.
Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com>
---
src/qemu/qemu_conf.c | 28 ++++++++++++++--------------
src/qemu/qemu_driver.c | 18 +++++++++---------
2 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c
index 3e334dc..d7bc798 100644
--- a/src/qemu/qemu_conf.c
+++ b/src/qemu/qemu_conf.c
@@ -3422,8 +3422,8 @@ int qemudBuildCommandLine(virConnectPtr conn,
unsigned long long qemuCmdFlags,
const char ***retargv,
const char ***retenv,
- int **tapfds,
- int *ntapfds,
+ int **vmfds,
+ int *nvmfds,
const char *migrateFrom,
virDomainSnapshotObjPtr current_snapshot)
{
@@ -4116,7 +4116,7 @@ int qemudBuildCommandLine(virConnectPtr conn,
if (tapfd < 0)
goto error;
- if (VIR_REALLOC_N(*tapfds, (*ntapfds)+1) < 0) {
+ if (VIR_REALLOC_N(*vmfds, (*nvmfds)+1) < 0) {
virNWFilterTearNWFilter(net);
close(tapfd);
goto no_memory;
@@ -4124,7 +4124,7 @@ int qemudBuildCommandLine(virConnectPtr conn,
last_good_net = i;
- (*tapfds)[(*ntapfds)++] = tapfd;
+ (*vmfds)[(*nvmfds)++] = tapfd;
if (snprintf(tapfd_name, sizeof(tapfd_name), "%d", tapfd) >= sizeof(tapfd_name))
goto no_memory;
@@ -4136,7 +4136,7 @@ int qemudBuildCommandLine(virConnectPtr conn,
if (tapfd < 0)
goto error;
- if (VIR_REALLOC_N(*tapfds, (*ntapfds)+1) < 0) {
+ if (VIR_REALLOC_N(*vmfds, (*nvmfds)+1) < 0) {
virNWFilterTearNWFilter(net);
close(tapfd);
goto no_memory;
@@ -4144,7 +4144,7 @@ int qemudBuildCommandLine(virConnectPtr conn,
last_good_net = i;
- (*tapfds)[(*ntapfds)++] = tapfd;
+ (*vmfds)[(*nvmfds)++] = tapfd;
if (snprintf(tapfd_name, sizeof(tapfd_name), "%d", tapfd) >= sizeof(tapfd_name))
goto no_memory;
@@ -4157,12 +4157,12 @@ int qemudBuildCommandLine(virConnectPtr conn,
network device */
int vhostfd = qemudOpenVhostNet(net, qemuCmdFlags);
if (vhostfd >= 0) {
- if (VIR_REALLOC_N(*tapfds, (*ntapfds)+1) < 0) {
+ if (VIR_REALLOC_N(*vmfds, (*nvmfds)+1) < 0) {
close(vhostfd);
goto no_memory;
}
- (*tapfds)[(*ntapfds)++] = vhostfd;
+ (*vmfds)[(*nvmfds)++] = vhostfd;
if (snprintf(vhostfd_name, sizeof(vhostfd_name), "%d", vhostfd)
>= sizeof(vhostfd_name))
goto no_memory;
@@ -4653,12 +4653,12 @@ int qemudBuildCommandLine(virConnectPtr conn,
error:
for (i = 0; i <= last_good_net; i++)
virNWFilterTearNWFilter(def->nets[i]);
- if (tapfds &&
- *tapfds) {
- for (i = 0; i < *ntapfds; i++)
- close((*tapfds)[i]);
- VIR_FREE(*tapfds);
- *ntapfds = 0;
+ if (vmfds &&
+ *vmfds) {
+ for (i = 0; i < *nvmfds; i++)
+ close((*vmfds)[i]);
+ VIR_FREE(*vmfds);
+ *nvmfds = 0;
}
if (qargv) {
for (i = 0 ; i < qargc ; i++)
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index 65ca117..dd5bd24 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -3253,8 +3253,8 @@ static int qemudStartVMDaemon(virConnectPtr conn,
const char **progenv = NULL;
int i, ret;
struct stat sb;
- int *tapfds = NULL;
- int ntapfds = 0;
+ int *vmfds = NULL;
+ int nvmfds = 0;
unsigned long long qemuCmdFlags;
fd_set keepfd;
const char *emulator;
@@ -3411,7 +3411,7 @@ static int qemudStartVMDaemon(virConnectPtr conn,
vm->def->id = driver->nextvmid++;
if (qemudBuildCommandLine(conn, driver, vm->def, priv->monConfig,
priv->monJSON, qemuCmdFlags, &argv, &progenv,
- &tapfds, &ntapfds, migrateFrom,
+ &vmfds, &nvmfds, migrateFrom,
vm->current_snapshot) < 0)
goto cleanup;
@@ -3462,8 +3462,8 @@ static int qemudStartVMDaemon(virConnectPtr conn,
VIR_WARN("Unable to seek to end of logfile: %s",
virStrerror(errno, ebuf, sizeof ebuf));
- for (i = 0 ; i < ntapfds ; i++)
- FD_SET(tapfds[i], &keepfd);
+ for (i = 0 ; i < nvmfds ; i++)
+ FD_SET(vmfds[i], &keepfd);
ret = virExecDaemonize(argv, progenv, &keepfd, &child,
stdin_fd, &logfile, &logfile,
@@ -3504,11 +3504,11 @@ static int qemudStartVMDaemon(virConnectPtr conn,
if (ret == -1) /* The VM failed to start; tear filters before taps */
virNWFilterTearVMNWFilters(vm);
- if (tapfds) {
- for (i = 0 ; i < ntapfds ; i++) {
- close(tapfds[i]);
+ if (vmfds) {
+ for (i = 0 ; i < nvmfds ; i++) {
+ close(vmfds[i]);
}
- VIR_FREE(tapfds);
+ VIR_FREE(vmfds);
}
if (ret == -1) /* The VM failed to start */
14 years, 7 months
[libvirt] [PATCH] qemu driver: fix version check typos
by Chris Wright
Looks like some cut'n paste error to me.
Signed-off-by: Chris Wright <chrisw(a)redhat.com>
---
src/qemu/qemu_conf.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c
index 3e334dc..6d2ac6e 100644
--- a/src/qemu/qemu_conf.c
+++ b/src/qemu/qemu_conf.c
@@ -1291,13 +1291,13 @@ int qemudParseHelpStr(const char *qemu,
++p;
minor = virParseNumber(&p);
- if (major == -1 || *p != '.')
+ if (minor == -1 || *p != '.')
goto fail;
++p;
micro = virParseNumber(&p);
- if (major == -1)
+ if (micro == -1)
goto fail;
SKIP_BLANKS(p);
14 years, 7 months
[libvirt] How to enable vhost for virtIO NIC?
by Huang, Zhiteng
Hi gurus on the list,
I'm trying to bring up a Linux with virtio vhost backend. My system is running on kernel 2.6.34-rc7, libvirt 0.8.0.
Two questions regarding to vhost:
1) XML format for vhost
I didn't find any documents on libvirt.org description the XML or QMU argument format for vhost.
According to http://www.linux-kvm.org/page/VhostNet#vhost-net_driver_projects, I tried *domxml-from-native* to convert following qemu argument to XML
qemu-system-x86_64 -m 1G disk-c.qcow2 \
-net nic,model=virtio,netdev=foo \
-netdev tap,id=foo,ifname=msttap0,script=/home/mst/ifup,downscript=no,vhost=on
But the output clearly ignore the network.
<domain type='qemu'>
<name>unnamed</name>
<uuid>9cc877c1-7ac2-463d-3d3f-fa8f8918fe23</uuid>
<memory>1048576</memory>
<currentMemory>1048576</currentMemory>
<vcpu>1</vcpu>
<os>
<type arch='x86_64'>hvm</type>
</os>
<features>
<acpi/>
</features>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<emulator>qemu-system-x86_64</emulator>
<input type='mouse' bus='ps2'/>
<graphics type='sdl'/>
<video>
<model type='cirrus' vram='9216' heads='1'/>
</video>
</devices>
</domain>
What's the problem here?
2) Virtio driver.
It's said that vhost require guest kernel version > 2.6.31 because vhost requires MSI-X. How about frontend of virtio driver? Say I'm running a Windows 2008 (with MSI-X support) + virtio NIC, is it necessary to upgrade frontend driver too?
Regards,
HUANG, Zhiteng
14 years, 7 months
[libvirt] [PATCH 0/4] qemu: Unify cleanup paths in qemuStartVMDaemon
by Cole Robinson
Many of the cleanup paths in qemuStartVMDaemon have the potential of
squashing a legitimate startup error message. qemuShutdownVMDaemon
already properly handles this, so let's unify all the cleanup to use it.
This series fixes a few teardown issues, and changes ShutdownVMDaemon to
not reject non-running VMs. This could be an issue if some caller was
depending on this functionality, but I couldn't find one.
Cole Robinson (4):
qemu: Properly cleanup in security startup error path
qemu: Remove explicit VNC XML cleanup
qemu: Don't deny ShutdownVMDaemon for non-running VMs
qemu: Use ShutdownVMDaemon for all startup cleanup paths
src/qemu/qemu_driver.c | 31 +++++--------------------------
1 files changed, 5 insertions(+), 26 deletions(-)
14 years, 7 months
[libvirt] [PATCH 1/2] maint: avoid unwanted newline at end of diagnostic
by Jim Meyering
While I was in the virtual vicinity,
Jiri mentioned the possibility of detecting one more minor
formatting problem: the stray newline at the end of a diagnostic.
Here are two corrections and the heuristic that caught them
(and that will prevent introduction of some new ones -- but not if the
end of the message is more than 2 lines after the function name).
Currently there are no false positives.
>From 122b1e31fb33c092a53802b56a0f2f5586c95bd5 Mon Sep 17 00:00:00 2001
From: Jim Meyering <meyering(a)redhat.com>
Date: Thu, 20 May 2010 11:12:17 +0200
Subject: [PATCH 1/2] maint: remove unwanted newline at end of diagnostic
* src/xen/xend_internal.c (xenDaemonDomainDefineXML): Remove \n.
* src/network/bridge_driver.c (networkAddMasqueradingIptablesRules):
Likewise.
---
src/network/bridge_driver.c | 2 +-
src/xen/xend_internal.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c
index 3b9b4f4..5d7ef19 100644
--- a/src/network/bridge_driver.c
+++ b/src/network/bridge_driver.c
@@ -642,7 +642,7 @@ networkAddMasqueradingIptablesRules(struct network_driver *driver,
network->def->network,
network->def->forwardDev))) {
virReportSystemError(err,
- _("failed to add iptables rule to enable masquerading to '%s'\n"),
+ _("failed to add iptables rule to enable masquerading to '%s'"),
network->def->forwardDev ? network->def->forwardDev : NULL);
goto masqerr3;
}
diff --git a/src/xen/xend_internal.c b/src/xen/xend_internal.c
index ea5addd..a203a8d 100644
--- a/src/xen/xend_internal.c
+++ b/src/xen/xend_internal.c
@@ -4731,7 +4731,7 @@ virDomainPtr xenDaemonDomainDefineXML(virConnectPtr conn, const char *xmlDesc) {
VIR_FREE(sexpr);
if (ret != 0) {
virXendError(VIR_ERR_XEN_CALL,
- _("Failed to create inactive domain %s\n"), def->name);
+ _("Failed to create inactive domain %s"), def->name);
goto error;
}
--
1.7.1.259.g3aef8
>From 532672f3a0c53213609dab49df2e7efcaf0eb594 Mon Sep 17 00:00:00 2001
From: Jim Meyering <meyering(a)redhat.com>
Date: Thu, 20 May 2010 11:13:41 +0200
Subject: [PATCH 2/2] maint: prohibit newline at end of diagnostic
* cfg.mk (sc_prohibit_newline_at_end_of_diagnostic): New rule.
Idea proposed by Jiri Denemark.
---
cfg.mk | 14 ++++++++++++++
1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/cfg.mk b/cfg.mk
index 2909e3e..b024c75 100644
--- a/cfg.mk
+++ b/cfg.mk
@@ -391,6 +391,20 @@ sc_libvirt_unmarked_diagnostics:
{ echo '$(ME): found unmarked diagnostic(s)' 1>&2; \
exit 1; } || :
+# Like the above, but prohibit a newline at the end of a diagnostic.
+# This is subject to false positives partly because it naively looks for
+# `\n"', which may not be the end of the string, and also because it takes
+# two lines of context (the -A2) after the line with the function name.
+# FIXME: this rule might benefit from a separate function list, in case
+# there are functions to which this one applies but that do not get marked
+# diagnostics.
+sc_prohibit_newline_at_end_of_diagnostic:
+ @grep -A2 -nE \
+ '\<$(func_re) *\(' $$($(VC_LIST_EXCEPT)) \
+ | grep '\\n"' \
+ && { echo '$(ME): newline at end of message(s)' 1>&2; \
+ exit 1; } || :
+
# Disallow trailing blank lines.
sc_prohibit_trailing_blank_lines:
@$(VC_LIST_EXCEPT) | xargs perl -ln -0777 -e \
--
1.7.1.259.g3aef8
14 years, 7 months
