March 2010 - Devel - libvirt List Archives

[libvirt] [PATCH 0/1] Support domain restore from root-squash NFS
by Laine Stump 03 Mar '10

03 Mar '10

Most of the explanation is in the commit message with the patch proper. When reveiwing please take pains to point out any places where I may not be diligent enough cleaning up loose ends, especially in terms of assuring that the child process always terminates properly no matter what happens. The (unrelated) race condition in qemudDomainRestore() remains - I solved it locally by putting a sleep(10) just before qemuMonitorStartCPUs(), but it needs something with a bit higher comfort factor ;-)

5 11

[libvirt] [PATCH] virsh: silence compiler warning
by Eric Blake 03 Mar '10

03 Mar '10

gcc warns: virsh.c:1879: warning: '0' flag ignored with '-' flag in gnu_printf format * tools/virsh.c (cmdDomjobinfo): Delete useless flag. --- tools/virsh.c | 18 +++++++++--------- 1 files changed, 9 insertions(+), 9 deletions(-) diff --git a/tools/virsh.c b/tools/virsh.c index a6a637d..65487ed 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -1876,27 +1876,27 @@ cmdDomjobinfo(vshControl *ctl, const vshCmd *cmd) vshPrint(ctl, "%-17s %-12llu ms\n", _("Time remaining:"), info.timeRemaining); if (info.dataTotal || info.dataRemaining || info.dataProcessed) { val = prettyCapacity(info.dataProcessed, &unit); - vshPrint(ctl, "%-17s %-0.3lf %s\n", _("Data processed:"), val, unit); + vshPrint(ctl, "%-17s %-.3lf %s\n", _("Data processed:"), val, unit); val = prettyCapacity(info.dataRemaining, &unit); - vshPrint(ctl, "%-17s %-0.3lf %s\n", _("Data remaining:"), val, unit); + vshPrint(ctl, "%-17s %-.3lf %s\n", _("Data remaining:"), val, unit); val = prettyCapacity(info.dataTotal, &unit); - vshPrint(ctl, "%-17s %-0.3lf %s\n", _("Data total:"), val, unit); + vshPrint(ctl, "%-17s %-.3lf %s\n", _("Data total:"), val, unit); } if (info.memTotal || info.memRemaining || info.memProcessed) { val = prettyCapacity(info.memProcessed, &unit); - vshPrint(ctl, "%-17s %-0.3lf %s\n", _("Memory processed:"), val, unit); + vshPrint(ctl, "%-17s %-.3lf %s\n", _("Memory processed:"), val, unit); val = prettyCapacity(info.memRemaining, &unit); - vshPrint(ctl, "%-17s %-0.3lf %s\n", _("Memory remaining:"), val, unit); + vshPrint(ctl, "%-17s %-.3lf %s\n", _("Memory remaining:"), val, unit); val = prettyCapacity(info.memTotal, &unit); - vshPrint(ctl, "%-17s %-0.3lf %s\n", _("Memory total:"), val, unit); + vshPrint(ctl, "%-17s %-.3lf %s\n", _("Memory total:"), val, unit); } if (info.fileTotal || info.fileRemaining || info.fileProcessed) { val = prettyCapacity(info.fileProcessed, &unit); - vshPrint(ctl, "%-17s %-0.3lf %s\n", _("File processed:"), val, unit); + vshPrint(ctl, "%-17s %-.3lf %s\n", _("File processed:"), val, unit); val = prettyCapacity(info.fileRemaining, &unit); - vshPrint(ctl, "%-17s %-0.3lf %s\n", _("File remaining:"), val, unit); + vshPrint(ctl, "%-17s %-.3lf %s\n", _("File remaining:"), val, unit); val = prettyCapacity(info.fileTotal, &unit); - vshPrint(ctl, "%-17s %-0.3lf %s\n", _("File total:"), val, unit); + vshPrint(ctl, "%-17s %-.3lf %s\n", _("File total:"), val, unit); } } else { ret = FALSE; -- 1.6.6.1

3 4

[libvirt] [PATCH] Add TCK script for host USB device hotplug/unplug
by Daniel P. Berrange 03 Mar '10

03 Mar '10

This adds support for testing host USB device hotplug/unplug in libvirt drivers. This currently fails in all known libvirt drivers :-) The QEMU driver only support the hotplug action, not unplug, hence the failure. Since the TCK can't assume there are any host USB devices that can be safely messed around with, the person running the test suite must first list one or more devices in the config file. If no devices are listed, the test will automatically skip all parts, rather than failing. * conf/default.cfg: Config entry to specify USB devices that the TCK can mess around with * lib/Sys/Virt/TCK.pm: API for getting a host USB device from the config * scripts/domain/240-usb-host-hotplug.t: Test case for USB device hotplug/unplug. --- conf/default.cfg | 13 +++++ lib/Sys/Virt/TCK.pm | 18 +++++++ scripts/domain/240-usb-host-hotplug.t | 89 +++++++++++++++++++++++++++++++++ 3 files changed, 120 insertions(+), 0 deletions(-) create mode 100644 scripts/domain/240-usb-host-hotplug.t diff --git a/conf/default.cfg b/conf/default.cfg index 556225e..f9c2b5c 100644 --- a/conf/default.cfg +++ b/conf/default.cfg @@ -99,3 +99,16 @@ kernels = ( # ostype = exe # } ) + +# Host USB devices that the test suite can safely mess around with +# without risk of breaking the host OS +host_usb_devices = ( +# Must list either vendor+product, or bus+dev, or both +# { +# vendor = 0x0627 +# product = 0x0001 +# bus = 001 +# device = 002 +# } +# Can list more than one USB device if many are available +) diff --git a/lib/Sys/Virt/TCK.pm b/lib/Sys/Virt/TCK.pm index 9e6b554..ce03935 100644 --- a/lib/Sys/Virt/TCK.pm +++ b/lib/Sys/Virt/TCK.pm @@ -769,4 +769,22 @@ sub xpath { return $xp->find($path); } +sub get_host_usb_device { + my $self = shift; + my $devindex = @_ ? shift : 0; + + my $devs = $self->config("host_usb_devices", []); + + if ($devindex > $#{$devs}) { + return (); + } + + my $bus = $self->config("host_usb_devices/[$devindex]/bus", undef); + my $device = $self->config("host_usb_devices/[$devindex]/device", undef); + my $vendor = $self->config("host_usb_devices/[$devindex]/vendor", undef); + my $product = $self->config("host_usb_devices/[$devindex]/product", undef); + + return ($bus, $device, $vendor, $product); +} + 1; diff --git a/scripts/domain/240-usb-host-hotplug.t b/scripts/domain/240-usb-host-hotplug.t new file mode 100644 index 0000000..4729300 --- /dev/null +++ b/scripts/domain/240-usb-host-hotplug.t @@ -0,0 +1,89 @@ +# -*- perl -*- +# +# Copyright (C) 2009 Red Hat +# Copyright (C) 2009 Daniel P. Berrange +# +# This program is free software; You can redistribute it and/or modify +# it under the GNU General Public License as published by the Free +# Software Foundation; either version 2, or (at your option) any +# later version +# +# The file "LICENSE" distributed along with this file provides full +# details of the terms and conditions +# + +=pod + +=head1 NAME + +domain/240-usb-host-hotplug.t - verify hot plug & unplug of a host USB device + +=head1 DESCRIPTION + +The test case validates that it is possible to hotplug a usb +host device to a running domain, and then unplug it again. +This requires that the TCK configuration file have at least +one host USB device listed. + +=cut + +use strict; +use warnings; + +use Test::More tests => 5; + +use Sys::Virt::TCK; +use Test::Exception; + +my $tck = Sys::Virt::TCK->new(); +my $conn = eval { $tck->setup(); }; +BAIL_OUT "failed to setup test harness: $@" if $@; +END { + $tck->cleanup if $tck; +} + + +my $xml = $tck->generic_domain("tck")->as_xml; + +diag "Creating a new transient domain"; +my $dom; +ok_domain(sub { $dom = $conn->create_domain($xml) }, "created transient domain object"); + + +my ($bus, $device, $vendor, $product) = $tck->get_host_usb_device(); + +SKIP: { + # Must have one of the pairs at least + unless (($bus && $device) || ($vendor && $product)) { + skip "No host usb device available in configuration file", 4; + } + + my $devxml = "<hostdev mode='subsystem' type='usb'>\n" . + "<source>\n"; + if ($bus && $device) { + $devxml .= "<address bus='$bus' device='$device'/>\n" + } + if ($vendor && $product) { + $devxml .= "<vendor id='$vendor'/>\n"; + $devxml .= "<product id='$product'/>\n"; + } + $devxml .= "</source>\n" . + "</hostdev>\n"; + + my $initialxml = $dom->get_xml_description; + + diag "Attaching the new dev $devxml"; + lives_ok(sub { $dom->attach_device($devxml); }, "USB dev has been attached"); + + my $newxml = $dom->get_xml_description; + ok($newxml =~ m|<hostdev|, "new XML has extra USB dev present"); + + diag "Detaching the new dev $devxml"; + lives_ok(sub { $dom->detach_device($devxml); }, "USB dev has been detached"); + + + my $finalxml = $dom->get_xml_description; + + is($initialxml, $finalxml, "final XML has removed the disk") +} + -- 1.6.5.2

1 0

[libvirt] [PATCH] web docs -- macvtap mode explanation
by Stefan Berger 03 Mar '10

03 Mar '10

This adds more information about the different macvtap device modes. Regards, Stefan

1 0

[libvirt] Xen Daemon error : internal error domain information incomplete, missing cpu_cap
by "J. Oriol Fitó" 03 Mar '10

03 Mar '10

Hi all, I'm using VirtMonitor on top of Xen and I'm wondering when the 'cpu_cap' feature will be available. Best regards, Oriol

1 0

[libvirt] [PATCH] esx: don't ignore failure on close
by Eric Blake 03 Mar '10

03 Mar '10

Another warning caught by coverity. Continue to perform best-effort closing and resource release, but warn the caller about the failure. * src/esx/esx_driver.c (esxClose): Return an error on failure to close. --- src/esx/esx_driver.c | 18 +++++++++++------- 1 files changed, 11 insertions(+), 7 deletions(-) diff --git a/src/esx/esx_driver.c b/src/esx/esx_driver.c index e125a09..45b389f 100644 --- a/src/esx/esx_driver.c +++ b/src/esx/esx_driver.c @@ -2,6 +2,7 @@ /* * esx_driver.c: core driver methods for managing VMware ESX hosts * + * Copyright (C) 2010 Red Hat, Inc. * Copyright (C) 2009, 2010 Matthias Bolte <matthias.bolte(a)googlemail.com> * Copyright (C) 2009 Maximilian Wilhelm <max(a)rfc2324.org> * @@ -559,16 +560,19 @@ static int esxClose(virConnectPtr conn) { esxPrivate *priv = conn->privateData; + int result = 0; - esxVI_EnsureSession(priv->host); - - esxVI_Logout(priv->host); + if (esxVI_EnsureSession(priv->host) < 0 || + esxVI_Logout(priv->host) < 0) { + result = -1; + } esxVI_Context_Free(&priv->host); if (priv->vCenter != NULL) { - esxVI_EnsureSession(priv->vCenter); - - esxVI_Logout(priv->vCenter); + if (esxVI_EnsureSession(priv->vCenter) < 0 || + esxVI_Logout(priv->vCenter) < 0) { + result = -1; + } esxVI_Context_Free(&priv->vCenter); } @@ -579,7 +583,7 @@ esxClose(virConnectPtr conn) conn->privateData = NULL; - return 0; + return result; } -- 1.6.6.1

3 2

[libvirt] [PATCH 1/2] Use AC_SEARCH_LIBS to find the library to use for dlopen().
by Diego Elio Pettenò 03 Mar '10

03 Mar '10

Instead of using AC_CHECK_LIB and hardcoding -ldl, search for the library needed to get dlopen() and then use the cached value. --- configure.ac | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/configure.ac b/configure.ac index 5b1eb5f..a3f28c4 100644 --- a/configure.ac +++ b/configure.ac @@ -1705,7 +1705,7 @@ if test "x$with_driver_modules" = "xyes" ; then old_libs="$LIBS" fail=0 AC_CHECK_HEADER([dlfcn.h],[],[fail=1]) - AC_CHECK_LIB([dl], [dlopen],[],[fail=1]) + AC_SEARCH_LIBS([dlopen], [dl], [], [fail=1]) test $fail = 1 && AC_MSG_ERROR([You must have dlfcn.h / dlopen() support to build driver modules]) @@ -1714,7 +1714,7 @@ if test "x$with_driver_modules" = "xyes" ; then fi if test "$with_driver_modules" = "yes"; then DRIVER_MODULES_CFLAGS="-export-dynamic" - DRIVER_MODULES_LIBS="-ldl" + DRIVER_MODULES_LIBS="$ac_cv_search_dlopen" AC_DEFINE_UNQUOTED([WITH_DRIVER_MODULES], 1, [whether to build drivers as modules]) fi AM_CONDITIONAL([WITH_DRIVER_MODULES], [test "$with_driver_modules" != "no"]) -- 1.7.0

4 5

[libvirt] [PATCH] HACKING: add a section on preprocessor conventions
by Eric Blake 03 Mar '10

03 Mar '10

* HACKING: Document recently-discussed style issues. Signed-off-by: Eric Blake <eblake(a)redhat.com> --- Turn recent discussions: https://www.redhat.com/archives/libvir-list/2010-March/msg00058.html https://www.redhat.com/archives/libvir-list/2010-March/msg00120.html into policy, so I don't keep debating style points ;) Can wait till after 0.7.7 (particularly since the vararg macro series is also waiting). HACKING | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-) diff --git a/HACKING b/HACKING index be8725d..50b24ee 100644 --- a/HACKING +++ b/HACKING @@ -102,6 +102,17 @@ Usually they're in macro definitions or strings, and should be converted anyhow. +Preprocessor +============ +For variadic macros, stick with C99 syntax: + +#define vshPrint(_ctl, ...) fprintf(stdout, __VA_ARGS__) + +Use parenthesis when checking if a macro is defined: + +#if defined(HAVE_POSIX_FALLOCATE) && !defined(HAVE_FALLOCATE) + + C types ======= Use the right type. -- 1.6.6.1

2 1

[libvirt] Update on 0.7.7 release schedule
by Daniel Veillard 02 Mar '10

02 Mar '10

As you can have noticed we still have patches queued up and not yet pushed, plus added a new interface yesterday. I'm travelling all of this week, so my bandwidth is limited. Plus February is a short month and we skipped a bit for 0.7.6, so time to validate and push patches has been shorter than usual. So I suggest to still push patches today and tomorrow for features, and start the freeze on thusday evening, and delaying the release to mid of next week. But still try to keep the expected cycle for 0.7.8 with a freeze on March 19 and a release on the 26 :-) Hope this doesn't disrupt other people schedules ! Daniel -- Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/ http://veillard.com/ | virtualization library http://libvirt.org/

1 1

[libvirt] [PATCH] Fix detection of errors in QEMU device_add command
by Daniel P. Berrange 02 Mar '10

02 Mar '10

The code assumed that 'device_add' returned an empty string upon success. This is not true, it sometimes prints random debug info. THus we need to check for an explicit fail string * src/qemu/qemu_monitor_text.c: Fix error checking of the device_add monitor command --- src/qemu/qemu_monitor_text.c | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-) diff --git a/src/qemu/qemu_monitor_text.c b/src/qemu/qemu_monitor_text.c index 7604ae8..c60e840 100644 --- a/src/qemu/qemu_monitor_text.c +++ b/src/qemu/qemu_monitor_text.c @@ -2122,9 +2122,11 @@ int qemuMonitorTextAddDevice(qemuMonitorPtr mon, goto cleanup; } - if (STRNEQ(reply, "")) { + /* If the command failed qemu prints: + * Could not add ... */ + if (strstr(reply, "Could not add ")) { qemuReportError(VIR_ERR_OPERATION_FAILED, - _("adding %s device failed: %s"), devicestr, reply); + _("adding %s device failed"), devicestr); goto cleanup; } -- 1.6.5.2

2 1