October 2009 - Devel - Libvirt List Archives

[libvirt] [PATCH 0/7] Series short description

by Amy Griffis

The following patches fix logging for the lxc controller. The lxc controller makes use of the libvirt logging module, but because it doesn't re-initialize the logging configuration the messages are currently going nowhere. There are a couple of options in fixing this. The lxc controller could use libvirtd's logging configuration exactly, or it adopt a more independent mode of logging to the container log file. After talking with Daniel Veillard a while back, it seemed clear that both behaviors are desirable. I resolved this by adding a lxc.conf file for the lxc driver, with a boolean variable to toggle between modes. I hope this looks good to both libvirt and container folks. libvirt.spec.in | 16 ++++++ src/Makefile.am | 25 +++++++-- src/libvirt_private.syms | 3 + src/lxc/libvirtd_lxc.aug | 30 +++++++++++ src/lxc/lxc.conf | 13 +++++ src/lxc/lxc_conf.c | 24 +++++++++ src/lxc/lxc_conf.h | 1 src/lxc/lxc_controller.c | 3 + src/lxc/lxc_driver.c | 86 ++++++++++++++++++++++++++++---- src/lxc/test_libvirtd_lxc.aug | 31 ++++++++++++ src/util/logging.c | 109 ++++++++++++++++++++++++++++++++++++++--- src/util/logging.h | 14 +++++ src/util/util.c | 49 ++++++++++++++++++ src/util/util.h | 3 + 14 files changed, 379 insertions(+), 28 deletions(-) create mode 100644 src/lxc/libvirtd_lxc.aug create mode 100644 src/lxc/lxc.conf create mode 100644 src/lxc/test_libvirtd_lxc.aug Regards, Amy

15 years, 2 months

6
35
0 / 0

[libvirt] Resubmission #2: [PATCH 0/3] sVirt AppArmor security driver

by Jamie Strandboge

Resubmitting again based on feedback from this list. Notably, the driver has been reworked to use: xml = virDomainDefFormat(conn, vm->def, ... Then the helper program uses: ctl->def = virDomainDefParseString(... xmlStr ...); This simplifies adding new files. Part of this process involved adding support for kernel, initrd, loader, serial, and console. I have commented out code for hostdev (and pci would be easy enough), but it requires a patch to to move the _usbDevice struct fully into hostusb.h. I figure once the AppArmor driver is in, I can submit a patch for that. This iteration also properly works with attach/detach. While I use virDomainDefFormat() primarily, this does not work with attach because the definition is not updated with the information yet (neither def nor newDef), so I pass the disk file on the command line. For now this is ok since SetSecurityImageLabel currently only deals with a single file, but this will need to be adjusted depending on how the storage backend patch works out. I thought about creating a new def and inserting the disk into it and sending it off to virt-aa-helper, but I couldn't find an easy way to get an accurate virCapsPtr in security_apparmor.c. I had a similar problem with virt-aa-helper, but there I just created a fake virCapsPtr (which defaults to 'hvm', which was a compromise I was willing to make at this time since sVirt only supports qemu right now). The issues with virCapsPtr aside, the code is overall cleaner and much more easily extendable, so thanks for the excellent feedback. :) The patches are against up to date trunk, compiles with no warnings, 'make check' passes for the tests I added, and the code passes syntax-check. With the exception of the three calls to strncpy I had to convert to virStr*, this is the code that is currently in Ubuntu 9.10 (0.7.0-1ubuntu8). Among other things, that means 9.10 now has your preferred licensing. [PATCH 1] patch_1_reenable-nonfile-labels.patch (Updated based on prior feedback): When James Morris originally submitted his sVirt patches (as seen in libvirt 0.6.1), he did not require on disk labelling for virSecurityDomainRestoreImageLabel. A later commit[2] changed this behavior to assume on disk labelling, which halts implementations for path-based MAC systems such as AppArmor and TOMOYO where vm->def->seclabel is required to obtain the label. This patch simply adds the 'virDomainObjPtr vm' argument back to *RestoreImageLabel. [PATCH 2] patch_2_apparmor_driver.patch (updated and merged into one patch based on prior feedback): - Updates src/security.c for AppArmor - Adds security_apparmor.c, security_apparmor.h, virt-aa-helper.c and updates po/POTFILES.in. virt-aa-helper.c is a new binary which is used exclusively by the AppArmor security driver to manipulate AppArmor. - Adds tests for virt-aa-helper and the security driver. secaatest.c is identical to seclabeltest.c except it initializes the 'apparmor' driver instead of 'selinux'. These tests are integrated into 'make check' and pass. - Updates configure.in, Makefile.am, src/Makefile.am, tests/Makefile.am, and tools/Makefile.am for AppArmor. It is based on and should operate the same as the SELinux configuration. [PATCH 3] patch_3_docs.patch (Updated based on prior feedback): Updates docs/drvqemu.html.in for AppArmor and adds profile examples to examples/apparmor. Updated based on prior feedback. Jamie On Fri, 04 Sep 2009, Jamie Strandboge wrote: > This patch series implements the AppArmor security driver for sVirt. > This implementation was developed for the Ubuntu AppArmorLibvirtProfile > specification[1], but is general enough for any AppArmor deployment > (such as Ubuntu, *SUSE and Mandriva). > > This patch has seen quite a bit of real world testing in Ubuntu 9.10 > (our development release) in our 0.7.0-1ubuntu3 package. I did make a > few small changes after going through HACKING, but mostly I got the > tests going and added documentation. > > DESIGN > ------ > When a virtual machine is started, determine if a profile is currently > defined for the machine, and use it if available. If not, generate a new > profile for the machine based on a template, which is by default a very > restrictive profile allowing access to disk files, and anything else > needed to run, such as the pid, monitor and log files. > > Virtual machines should have a unique profile specific to that machine. > To ensure uniqueness, the profile name will be derived from the UUID of > the virtual machine. These profiles should be configurable, either by > adjusting the profile template for new machines, creating/modifying the > VM profile directly or through the use of AppArmor abstractions. This > will allow for administrators to fine-tune confinement for individual > machines if desired. > > If enabled at compile time, the sVirt security model will be activated > if AppArmor is available on the host OS and a profile for the libvirtd > daemon is loaded when libvirtd is started. > > libvirtd should not be allowed to create arbitrary profiles or modify > profiles directly, so as to not allow libvirtd to potentially (ie via a > security bug in libvirtd itself) bootstrap out of AppArmor confinement. > > Because root privileges are needed to manipulate AppArmor profiles, > qemu:///session will not be supported at this time, but the > implementation must allow for a confined libvirtd with qemu:///session > guests running unconfined. This can be revisited when AppArmor supports > per-user profiles. > > Please see the specification[1] for more details. -- Jamie Strandboge | http://www.canonical.com

15 years, 2 months

3
12
0 / 0

[libvirt] [PATCH] cgroup -Werror fix

by Cole Robinson

Building with -Werror, I'm getting this error: make[3]: *** [libvirt_lxc-cgroup.o] Error 1 make[3]: *** Waiting for unfinished jobs.... cc1: warnings being treated as errors util/cgroup.c: In function 'virCgroupGetMemoryUsage': util/cgroup.c:743: error: passing argument 4 of 'virCgroupGetValueU64' from incompatible pointer type util/cgroup.c:381: note: expected 'long long unsigned int *' but argument is of type 'uint64_t *' Patch below fixes it, though I'm not familiar with the code. - Cole diff --git a/src/util/cgroup.c b/src/util/cgroup.c index 77f19a5..f728a2f 100644 --- a/src/util/cgroup.c +++ b/src/util/cgroup.c @@ -736,7 +736,7 @@ */ int virCgroupGetMemoryUsage(virCgroupPtr group, unsigned long *kb) { - uint64_t usage_in_bytes; + long long unsigned int usage_in_bytes; int ret; ret = virCgroupGetValueU64(group, VIR_CGROUP_CONTROLLER_MEMORY,

15 years, 2 months

2
1
0 / 0

[libvirt] [PATCH] in vbox driver, interface type bridge should really be type ethernet

by Florian Vichot

If I understand correctly, the "bridge" type for an interface means libvirt is in charge of creating a tun device and adding it to the specified bridge in the <source bridge=".."> attribute. This is not what the (badly named IHMO) "Bridged Networking" mode in vbox does: all it does is read and write its packets on the specified interface. Which is what a type "ethernet" interface does in my opinion. I joined a quick patch for that, Pritesh could you check it ? Also, I was about to patch to add support for the proper "bridge" mode in the vbox driver (because it's what I need in the end), but I see no way of storing the fact that it's not just an "ethernet" interface using the vbox API, so that the config would persist over libvirtd restarts. There is always the possibility of naming the interface a special way like "br1_myTap", and assume any type "ethernet" interface with a device containing a "br1_" prefix would actually be a type "bridge" interface with an associated "vbox_br1" bridge. Would that be acceptable, or is it too hackish ? BTW, just to make sure, I can use pretty much anything as a <target> ie. ethN, panN etc in a type "ethernet" interface, right ? If <target> is specified, it's not going to create a tun and use that ? Thanks, Florian

15 years, 2 months

4
6
0 / 0

[libvirt] [PATCH 0/6] correctly migrate paused VMs (and a bunch of bugfixes)

by Paolo Bonzini

Currently, the QEMU driver tries to migrate paused VMs, but the effect is that the migrated virtual machine will always run on the destination. Furthermore, the state is erroneously stored as paused, so that the driver is left confused and it is not possible to re-pause the VM without doing a (useless except to make the libvirtd state consistent) "virsh resume" first. While pausing is not very used, this feature is still nice-to-have in case for example you're migrating all VMs in emergency, or (when QEMU will have asynchronous notifications) if you want to run QEMU with the werror=stop option (*). This set of patches is structured as follows: 1) patches 1 and 2 fix two bugs that were introduced by the recent reorganization. 2) patch 3 fixes a bug that happens to be in the paths touched later on; 3) patch 4 adds the possibility to migrate a VM and leave it suspended on the destination VM. I added the feature for debugging and thought I might as well submit it for inclusion. Especially if the last two patches turn out to be a no-go (at least in their current form), this patch at least provides the infrastructure and a way to test it. 4) patches 5 and 6 actually fix the bug. Unfortunately, this requires a change to the RPC protocol. I'm not sure whether it is required the libvirtd's on both sides of the migration to have the same version, or rather if this is a deal breaker. The change to the protocol is in patch 5; the bug fix is in patch 6. Please review and ack (or, for the last two, nack). Paolo (*) While the state of the migrated VM is currently fetched at the beginning of migration, the communication happens at the end of it (from Perform to Finish), so this is ready for being improved in the future once QEMU provides asynchronous notifications.

15 years, 2 months

5
26
0 / 0

[libvirt] [PATCH] Misc win32 build fixes

by Daniel P. Berrange

* daemon/Makefile.am: Fix missing sasl rule * src/datatypes.c: Add unistd.h to avoid gnulib bug * src/util/cgroup.c: Disable mntent if not available --- daemon/Makefile.am | 3 ++ src/datatypes.c | 1 + src/util/cgroup.c | 66 ++++++++++++++++++++++++++++++++++++++++++--------- 3 files changed, 58 insertions(+), 12 deletions(-) diff --git a/daemon/Makefile.am b/daemon/Makefile.am index 26347d6..84aab04 100644 --- a/daemon/Makefile.am +++ b/daemon/Makefile.am @@ -243,6 +243,9 @@ install-data-sasl: uninstall-data-sasl: rm -f $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf rmdir $(DESTDIR)$(sysconfdir)/sasl2/ +else +install-data-sasl: +uninstall-data-sasl: endif diff --git a/src/datatypes.c b/src/datatypes.c index 6741b9e..89ad309 100644 --- a/src/datatypes.c +++ b/src/datatypes.c @@ -20,6 +20,7 @@ */ #include <config.h> +#include <unistd.h> #include "datatypes.h" #include "virterror_internal.h" diff --git a/src/util/cgroup.c b/src/util/cgroup.c index 2e646fd..66297b9 100644 --- a/src/util/cgroup.c +++ b/src/util/cgroup.c @@ -13,7 +13,9 @@ #include <stdio.h> #include <stdint.h> #include <inttypes.h> +#ifdef HAVE_MNTENT_H #include <mntent.h> +#endif #include <fcntl.h> #include <string.h> #include <errno.h> @@ -68,7 +70,7 @@ void virCgroupFree(virCgroupPtr *group) VIR_FREE(*group); } - +#ifdef HAVE_MNTENT_H /* * Process /proc/mounts figuring out what controllers are * mounted and where @@ -233,6 +235,7 @@ static int virCgroupDetect(virCgroupPtr group) return rc; } +#endif static int virCgroupPathOfController(virCgroupPtr group, @@ -317,12 +320,12 @@ static int virCgroupGetValueStr(virCgroupPtr group, static int virCgroupSetValueU64(virCgroupPtr group, int controller, const char *key, - uint64_t value) + unsigned long long int value) { char *strval = NULL; int rc; - if (virAsprintf(&strval, "%" PRIu64, value) == -1) + if (virAsprintf(&strval, "%llu", value) == -1) return -ENOMEM; rc = virCgroupSetValueStr(group, controller, key, strval); @@ -339,12 +342,12 @@ static int virCgroupSetValueU64(virCgroupPtr group, static int virCgroupSetValueI64(virCgroupPtr group, int controller, const char *key, - int64_t value) + long long int value) { char *strval = NULL; int rc; - if (virAsprintf(&strval, "%" PRIi64, value) == -1) + if (virAsprintf(&strval, "%lld", value) == -1) return -ENOMEM; rc = virCgroupSetValueStr(group, controller, key, strval); @@ -357,7 +360,7 @@ static int virCgroupSetValueI64(virCgroupPtr group, static int virCgroupGetValueI64(virCgroupPtr group, int controller, const char *key, - int64_t *value) + long long int *value) { char *strval = NULL; int rc = 0; @@ -378,7 +381,7 @@ out: static int virCgroupGetValueU64(virCgroupPtr group, int controller, const char *key, - uint64_t *value) + unsigned long long int *value) { char *strval = NULL; int rc = 0; @@ -387,7 +390,7 @@ static int virCgroupGetValueU64(virCgroupPtr group, if (rc != 0) goto out; - if (sscanf(strval, "%" SCNu64, value) != 1) + if (virStrToLong_ull(strval, NULL, 10, value) < 0) rc = -EINVAL; out: VIR_FREE(strval); @@ -396,6 +399,7 @@ out: } +#ifdef HAVE_MNTENT_H static int virCgroupCpuSetInherit(virCgroupPtr parent, virCgroupPtr group) { int i; @@ -546,7 +550,7 @@ cleanup: virCgroupFree(&rootgrp); return rc; } - +#endif /** * virCgroupRemove: @@ -617,6 +621,7 @@ int virCgroupAddTask(virCgroupPtr group, pid_t pid) * * Returns 0 on success */ +#ifdef HAVE_MNTENT_H int virCgroupForDriver(const char *name, virCgroupPtr *group, int privileged, @@ -650,6 +655,16 @@ out: return rc; } +#else +int virCgroupForDriver(const char *name ATTRIBUTE_UNUSED, + virCgroupPtr *group ATTRIBUTE_UNUSED, + int privileged ATTRIBUTE_UNUSED, + int create ATTRIBUTE_UNUSED) +{ + /* Claim no support */ + return -ENXIO; +} +#endif /** @@ -661,6 +676,7 @@ out: * * Returns 0 on success */ +#ifdef HAVE_MNTENT_H int virCgroupForDomain(virCgroupPtr driver, const char *name, virCgroupPtr *group, @@ -684,6 +700,15 @@ int virCgroupForDomain(virCgroupPtr driver, return rc; } +#else +int virCgroupForDomain(virCgroupPtr driver ATTRIBUTE_UNUSED, + const char *name ATTRIBUTE_UNUSED, + virCgroupPtr *group ATTRIBUTE_UNUSED, + int create ATTRIBUTE_UNUSED) +{ + return -ENXIO; +} +#endif /** * virCgroupSetMemory: @@ -786,6 +811,7 @@ int virCgroupAllowDeviceMajor(virCgroupPtr group, char type, int major) * * Returns: 0 on success */ +#if defined(major) && defined(minor) int virCgroupAllowDevicePath(virCgroupPtr group, const char *path) { struct stat sb; @@ -801,6 +827,14 @@ int virCgroupAllowDevicePath(virCgroupPtr group, const char *path) major(sb.st_rdev), minor(sb.st_rdev)); } +#else +int virCgroupAllowDevicePath(virCgroupPtr group ATTRIBUTE_UNUSED, + const char *path ATTRIBUTE_UNUSED) +{ + return -ENOSYS; +} +#endif + /** * virCgroupDenyDevice: @@ -861,6 +895,7 @@ int virCgroupDenyDeviceMajor(virCgroupPtr group, char type, int major) return rc; } +#if defined(major) && defined(minor) int virCgroupDenyDevicePath(virCgroupPtr group, const char *path) { struct stat sb; @@ -876,26 +911,33 @@ int virCgroupDenyDevicePath(virCgroupPtr group, const char *path) major(sb.st_rdev), minor(sb.st_rdev)); } +#else +int virCgroupDenyDevicePath(virCgroupPtr group ATTRIBUTE_UNUSED, + const char *path ATTRIBUTE_UNUSED) +{ + return -ENOSYS; +} +#endif int virCgroupSetCpuShares(virCgroupPtr group, unsigned long long shares) { return virCgroupSetValueU64(group, VIR_CGROUP_CONTROLLER_CPU, - "cpu.shares", (uint64_t)shares); + "cpu.shares", shares); } int virCgroupGetCpuShares(virCgroupPtr group, unsigned long long *shares) { return virCgroupGetValueU64(group, VIR_CGROUP_CONTROLLER_CPU, - "cpu.shares", (uint64_t *)shares); + "cpu.shares", shares); } int virCgroupGetCpuacctUsage(virCgroupPtr group, unsigned long long *usage) { return virCgroupGetValueU64(group, VIR_CGROUP_CONTROLLER_CPUACCT, - "cpuacct.usage", (uint64_t *)usage); + "cpuacct.usage", usage); } int virCgroupSetFreezerState(virCgroupPtr group, const char *state) -- 1.6.2.5

15 years, 2 months

2
3
0 / 0

[libvirt] [PATCH] Fix handling the return value of qemuMonitorSetBalloon

by Ryota Ozaki

Hi, The current code doesn't correctly handle the positive return value of qemuMonitorSetBalloon, i.e., the success case. The return value is directly passed to the return of qemudDomainSetMemory which treats a positive value as a failure. This patch fixes the defect. Thanks, ozaki-r >From f94b4c920ea30ae4a7f55fda343b4fff3bba040f Mon Sep 17 00:00:00 2001 From: Ryota Ozaki <ozaki.ryota(a)gmail.com> Date: Mon, 5 Oct 2009 03:14:58 +0900 Subject: [PATCH] Fix handling the return value of qemuMonitorSetBalloon * src/qemu/qemu_driver.c: The positive return value of qemuMonitorSetBalloon should be handled as a success --- src/qemu/qemu_driver.c | 13 ++++++++----- 1 files changed, 8 insertions(+), 5 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 95e672b..8cf9002 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -3020,17 +3020,20 @@ static int qemudDomainSetMemory(virDomainPtr dom, unsigned long newmem) { } if (virDomainIsActive(vm)) { - ret = qemuMonitorSetBalloon(vm, newmem); - /* Turn lack of balloon support into a fatal error */ - if (ret == 0) { + int r = qemuMonitorSetBalloon(vm, newmem); + if (r < 0) + goto cleanup; + + /* Lack of balloon support is a fatal error */ + if (r == 0) { qemudReportError(dom->conn, dom, NULL, VIR_ERR_NO_SUPPORT, "%s", _("cannot set memory of an active domain")); - ret = -1; + goto cleanup; } } else { vm->def->memory = newmem; - ret = 0; } + ret = 0; cleanup: if (vm) -- 1.6.5.rc2

15 years, 2 months

3
2
0 / 0

[libvirt] [PATCH] lxc: implement missing APIs to control the amount of memory

by Ryota Ozaki

Hi, The patch implements the missing memory control APIs for lxc, i.e., domainGetMaxMemory, domainSetMaxMemory, domainSetMemory, and improves domainGetInfo to return proper amount of used memory via cgroup. And also it includes trivial two fixes; add missing virCgroupSetMemory in libvirt_private.syms and fix invalid lxcError argument in lxcDomainGetInfo. Thanks, ozaki-r >From 530e56db9367fcb325aeaa7fb0d52a008db2f19f Mon Sep 17 00:00:00 2001 From: Ryota Ozaki <ozaki.ryota(a)gmail.com> Date: Mon, 5 Oct 2009 02:07:04 +0900 Subject: [PATCH] lxc: implement missing APIs to control the amount of memory * src/libvirt_private.syms: Export virCgroupGetMemoryUsage and add missing virCgroupSetMemory * src/lxc/lxc_driver.c: Implement missing memory functions * src/util/cgroup.c, src/util/cgroup.h: Add the function to get used memory --- src/libvirt_private.syms | 2 + src/lxc/lxc_driver.c | 122 ++++++++++++++++++++++++++++++++++++++++++++-- src/util/cgroup.c | 20 ++++++++ src/util/cgroup.h | 1 + 4 files changed, 140 insertions(+), 5 deletions(-) diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 49bbf96..3be3724 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -53,6 +53,8 @@ virCgroupForDriver; virCgroupRemove; virCgroupFree; virCgroupAddTask; +virCgroupSetMemory; +virCgroupGetMemoryUsage; virCgroupSetCpuShares; virCgroupGetCpuShares; virCgroupDenyDevicePath; diff --git a/src/lxc/lxc_driver.c b/src/lxc/lxc_driver.c index 5fb4105..8ec4ae4 100644 --- a/src/lxc/lxc_driver.c +++ b/src/lxc/lxc_driver.c @@ -450,6 +450,7 @@ static int lxcDomainGetInfo(virDomainPtr dom, if (!virDomainIsActive(vm) || driver->cgroup == NULL) { info->cpuTime = 0; + info->memory = vm->def->memory; } else { if (virCgroupForDomain(driver->cgroup, vm->def->name, &cgroup, 0) != 0) { lxcError(dom->conn, dom, VIR_ERR_INTERNAL_ERROR, @@ -458,13 +459,18 @@ static int lxcDomainGetInfo(virDomainPtr dom, } if (virCgroupGetCpuacctUsage(cgroup, &(info->cpuTime)) < 0) { - lxcError(dom->conn, dom, VIR_ERR_OPERATION_FAILED, ("cannot read cputime for domain")); + lxcError(dom->conn, dom, VIR_ERR_OPERATION_FAILED, + "%s", _("cannot read cputime for domain")); + goto cleanup; + } + if (virCgroupGetMemoryUsage(cgroup, &(info->memory)) < 0) { + lxcError(dom->conn, dom, VIR_ERR_OPERATION_FAILED, + "%s", _("cannot read memory usage for domain")); goto cleanup; } } info->maxMem = vm->def->maxmem; - info->memory = vm->def->memory; info->nrVirtCpu = 1; ret = 0; @@ -501,6 +507,112 @@ cleanup: return ret; } +/* Returns max memory in kb, 0 if error */ +static unsigned long lxcDomainGetMaxMemory(virDomainPtr dom) { + lxc_driver_t *driver = dom->conn->privateData; + virDomainObjPtr vm; + unsigned long ret = 0; + + lxcDriverLock(driver); + vm = virDomainFindByUUID(&driver->domains, dom->uuid); + lxcDriverUnlock(driver); + + if (!vm) { + char uuidstr[VIR_UUID_STRING_BUFLEN]; + virUUIDFormat(dom->uuid, uuidstr); + lxcError(dom->conn, dom, VIR_ERR_NO_DOMAIN, + _("no domain with matching uuid '%s'"), uuidstr); + goto cleanup; + } + + ret = vm->def->maxmem; + +cleanup: + if (vm) + virDomainObjUnlock(vm); + return ret; +} + +static int lxcDomainSetMaxMemory(virDomainPtr dom, unsigned long newmax) { + lxc_driver_t *driver = dom->conn->privateData; + virDomainObjPtr vm; + int ret = -1; + + lxcDriverLock(driver); + vm = virDomainFindByUUID(&driver->domains, dom->uuid); + lxcDriverUnlock(driver); + + if (!vm) { + char uuidstr[VIR_UUID_STRING_BUFLEN]; + virUUIDFormat(dom->uuid, uuidstr); + lxcError(dom->conn, dom, VIR_ERR_NO_DOMAIN, + _("no domain with matching uuid '%s'"), uuidstr); + goto cleanup; + } + + if (newmax < vm->def->memory) { + lxcError(dom->conn, dom, VIR_ERR_INVALID_ARG, + "%s", _("cannot set max memory lower than current memory")); + goto cleanup; + } + + vm->def->maxmem = newmax; + ret = 0; + +cleanup: + if (vm) + virDomainObjUnlock(vm); + return ret; +} + +static int lxcDomainSetMemory(virDomainPtr dom, unsigned long newmem) { + lxc_driver_t *driver = dom->conn->privateData; + virDomainObjPtr vm; + virCgroupPtr cgroup = NULL; + int ret = -1; + + lxcDriverLock(driver); + vm = virDomainFindByUUID(&driver->domains, dom->uuid); + lxcDriverUnlock(driver); + if (!vm) { + char uuidstr[VIR_UUID_STRING_BUFLEN]; + virUUIDFormat(dom->uuid, uuidstr); + lxcError(dom->conn, dom, VIR_ERR_NO_DOMAIN, + _("no domain with matching uuid '%s'"), uuidstr); + goto cleanup; + } + + if (newmem > vm->def->maxmem) { + lxcError(dom->conn, dom, VIR_ERR_INVALID_ARG, + "%s", _("cannot set memory higher than max memory")); + goto cleanup; + } + + if (virDomainIsActive(vm)) { + if (virCgroupForDomain(driver->cgroup, vm->def->name, &cgroup, 0) != 0) { + lxcError(dom->conn, dom, VIR_ERR_INTERNAL_ERROR, + _("Unable to get cgroup for %s¥n"), vm->def->name); + goto cleanup; + } + + if (virCgroupSetMemory(cgroup, newmem) < 0) { + lxcError(dom->conn, dom, VIR_ERR_OPERATION_FAILED, + "%s", _("cannot set memory for domain")); + goto cleanup; + } + } else { + vm->def->memory = newmem; + } + ret = 0; + +cleanup: + if (vm) + virDomainObjUnlock(vm); + if (cgroup) + virCgroupFree(&cgroup); + return ret; +} + static char *lxcDomainDumpXML(virDomainPtr dom, int flags) { @@ -2103,9 +2215,9 @@ static virDriver lxcDriver = { NULL, /* domainReboot */ lxcDomainDestroy, /* domainDestroy */ lxcGetOSType, /* domainGetOSType */ - NULL, /* domainGetMaxMemory */ - NULL, /* domainSetMaxMemory */ - NULL, /* domainSetMemory */ + lxcDomainGetMaxMemory, /* domainGetMaxMemory */ + lxcDomainSetMaxMemory, /* domainSetMaxMemory */ + lxcDomainSetMemory, /* domainSetMemory */ lxcDomainGetInfo, /* domainGetInfo */ NULL, /* domainSave */ NULL, /* domainRestore */ diff --git a/src/util/cgroup.c b/src/util/cgroup.c index 2e646fd..e56d293 100644 --- a/src/util/cgroup.c +++ b/src/util/cgroup.c @@ -702,6 +702,26 @@ int virCgroupSetMemory(virCgroupPtr group, unsigned long kb) } /** + * virCgroupGetMemoryUsage: + * + * @group: The cgroup to change memory for + * @kb: Pointer to returned used memory in kilobytes + * + * Returns: 0 on success + */ +int virCgroupGetMemoryUsage(virCgroupPtr group, unsigned long *kb) +{ + uint64_t usage_in_bytes; + int ret; + ret = virCgroupGetValueU64(group, + VIR_CGROUP_CONTROLLER_MEMORY, + "memory.usage_in_bytes", &usage_in_bytes); + if (ret == 0) + *kb = (unsigned long) usage_in_bytes >> 10; + return ret; +} + +/** * virCgroupDenyAllDevices: * * @group: The cgroup to deny devices for diff --git a/src/util/cgroup.h b/src/util/cgroup.h index aba56c6..aa36632 100644 --- a/src/util/cgroup.h +++ b/src/util/cgroup.h @@ -41,6 +41,7 @@ int virCgroupForDomain(virCgroupPtr driver, int virCgroupAddTask(virCgroupPtr group, pid_t pid); int virCgroupSetMemory(virCgroupPtr group, unsigned long kb); +int virCgroupGetMemoryUsage(virCgroupPtr group, unsigned long *kb); int virCgroupDenyAllDevices(virCgroupPtr group); -- 1.6.5.rc2

15 years, 2 months

3
2
0 / 0

[libvirt] [PATCH] Make dnsmasq run from libvirtd reading /etc/ethers

by Satoru SATOH

The following small patch makes dnsmasq run from libvirtd reading /etc/ethers and enables static ip address assignment with it. Libvirtd already supports static ip address assignment by //ip/dhcp/host element in network xml definition file, however the number of the assignments looks limited by ARG_MAX or similar parameters when dnsmasq is exec-ed. This patch implements a workaround for this issue and the number of static ip assignments becomes only limited by dnsmasq (I'm not sure the exact number but it should large enough for most cases, I guess). Signed-off-by: Satoru SATOH <satoru.satoh(a)gmail.com> --- src/network/bridge_driver.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index 95bc810..725d340 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -391,6 +391,7 @@ networkBuildDnsmasqArgv(virConnectPtr conn, 1 + /* dnsmasq */ 1 + /* --strict-order */ 1 + /* --bind-interfaces */ + 1 + /* --read-ethers */ (network->def->domain?2:0) + /* --domain name */ 2 + /* --pid-file /var/run/libvirt/network/$NAME.pid */ 2 + /* --conf-file "" */ @@ -427,6 +428,7 @@ networkBuildDnsmasqArgv(virConnectPtr conn, */ APPEND_ARG(*argv, i++, "--strict-order"); APPEND_ARG(*argv, i++, "--bind-interfaces"); + APPEND_ARG(*argv, i++, "--read-ethers"); if (network->def->domain) { APPEND_ARG(*argv, i++, "--domain"); -- 1.6.2.5

15 years, 2 months

2
2
0 / 0

[libvirt] [PATCH] Fix up "make check"

by Chris Lalancette

While running make check, I noticed that it was actually using the virsh binary from my system, in /usr/bin/virsh, and not the one that was just compiled. This is actually caused by a bug in Makefile.am, where we didn't update the PATH to include tools. While here, I also updated all of the scripts to properly define the srcdir, abs_top_srcdir, and abs_top_builddir environment variables. This is required if you want to be able to run the tests standalone (i.e. ./test instead of from make check). I've tested this on both RHEL-5 and Fedora-10 machines, and make check works on both, as does running the individual tests by hand. Signed-off-by: Chris Lalancette <clalance(a)redhat.com> --- tests/Makefile.am | 2 +- tests/cpuset | 12 ++++++++---- tests/daemon-conf | 18 +++++++++++------- tests/define-dev-segfault | 10 ++++++---- tests/int-overflow | 20 ++++++++++---------- tests/libvirtd-fail | 10 ++++++---- tests/libvirtd-pool | 10 ++++++---- tests/read-bufsiz | 15 ++++++++------- tests/read-non-seekable | 12 ++++++++---- tests/start | 10 ++++++---- tests/test_conf.sh | 14 ++++++++------ tests/undefine | 14 +++++++++----- tests/vcpupin | 12 ++++++++---- tests/virsh-all | 12 +++++++----- tests/virsh-synopsis | 11 +++++++---- 15 files changed, 109 insertions(+), 73 deletions(-) diff --git a/tests/Makefile.am b/tests/Makefile.am index abda4ad..4caca8f 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -150,7 +150,7 @@ TESTS += nodedevxml2xmltest TESTS += interfacexml2xmltest -path_add = $$abs_top_builddir/src$(PATH_SEPARATOR)$$abs_top_builddir/daemon +path_add = $$abs_top_builddir/src$(PATH_SEPARATOR)$$abs_top_builddir/daemon$(PATH_SEPARATOR)$$abs_top_builddir/tools # NB, automake < 1.10 does not provide the real # abs_top_{src/build}dir variables, so don't rely diff --git a/tests/cpuset b/tests/cpuset index eeb0ee2..9f43269 100755 --- a/tests/cpuset +++ b/tests/cpuset @@ -16,17 +16,21 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. +test -z "$srcdir" && srcdir=$(pwd) +test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. +test -z "$abs_top_builddir" && abs_top_builddir=$(pwd)/.. + if test "$VERBOSE" = yes; then set -x - virsh --version + $abs_top_builddir/tools/virsh --version fi -. $srcdir/test-lib.sh +. "$srcdir/test-lib.sh" fail=0 # generate input -virsh --connect test:///default dumpxml 1 > xml || fail=1 +$abs_top_builddir/tools/virsh --connect test:///default dumpxml 1 > xml || fail=1 # require the presence of the string we'll transform grep '<vcpu>' xml > /dev/null || fail=1 @@ -34,7 +38,7 @@ grep '<vcpu>' xml > /dev/null || fail=1 sed "s/vcpu>/vcpu cpuset='aaa'>/" xml > xml-invalid || fail=1 # Require failure and a diagnostic. -virsh --connect test:///default define xml-invalid > out 2>&1 && fail=1 +$abs_top_builddir/tools/virsh --connect test:///default define xml-invalid > out 2>&1 && fail=1 cat <<\EOF > exp || fail=1 error: Failed to define domain from xml-invalid error: failed Xen syscall topology cpuset syntax error diff --git a/tests/daemon-conf b/tests/daemon-conf index 071497e..722fe4e 100755 --- a/tests/daemon-conf +++ b/tests/daemon-conf @@ -1,16 +1,20 @@ #!/bin/sh # Get coverage of libvirtd's config-parsing code. +test -z "$srcdir" && srcdir=$(pwd) +test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. +test -z "$abs_top_builddir" && abs_top_builddir=$(pwd)/.. + if test "$VERBOSE" = yes; then set -x - libvirtd --version + $abs_top_builddir/daemon/libvirtd --version fi -test -z "$srcdir" && srcdir=$(pwd) -test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. -. $srcdir/test-lib.sh +. "$srcdir/test-lib.sh" + +test -z "$CONFIG_HEADER" && CONFIG_HEADER="$abs_top_builddir/config.h" -grep '^#define WITH_QEMU 1' $CONFIG_HEADER > /dev/null || +grep '^#define WITH_QEMU 1' "$CONFIG_HEADER" > /dev/null || skip_test_ "configured without QEMU support" conf="$abs_top_srcdir/daemon/libvirtd.conf" @@ -40,7 +44,7 @@ while :; do esac # Run libvirtd, expecting it to fail. - libvirtd --config=$f 2> err && fail=1 + $abs_top_builddir/daemon/libvirtd --config=$f 2> err && fail=1 case $rhs in # '"'*) msg='should be a string';; @@ -73,7 +77,7 @@ sed 's,^log_outputs.*,log_outputs="3:file:'"$(pwd)/log"'",' tmp.conf > k \ mv k tmp.conf || fail=1 printf "running libvirtd with a valid config file ($sleep_secs seconds)\n" 1>&2 -libvirtd --pid-file=pid-file --config=tmp.conf > log 2>&1 & pid=$! +$abs_top_builddir/daemon/libvirtd --pid-file=pid-file --config=tmp.conf > log 2>&1 & pid=$! sleep $sleep_secs kill $pid diff --git a/tests/define-dev-segfault b/tests/define-dev-segfault index 4ae286f..e0b953a 100755 --- a/tests/define-dev-segfault +++ b/tests/define-dev-segfault @@ -2,13 +2,15 @@ # Exercise a bug whereby defining a valid domain could kill libvirtd. # The bug can also be exercised with a simple define/dumpxml pair to virsh. +test -z "$srcdir" && srcdir=$(pwd) +test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. +test -z "$abs_top_builddir" && abs_top_builddir=$(pwd)/.. + if test "$VERBOSE" = yes; then set -x - virsh --version + $abs_top_builddir/tools/virsh --version fi -test -z "$srcdir" && srcdir=$(pwd) -test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. . "$srcdir/test-lib.sh" fail=0 @@ -62,7 +64,7 @@ cat <<\EOF > D.xml || fail=1 EOF url=test:///default -virsh --connect "$url" 'define D.xml; dumpxml D' > out 2>&1 || fail=1 +$abs_top_builddir/tools/virsh --connect "$url" 'define D.xml; dumpxml D' > out 2>&1 || fail=1 cat > exp <<EOF || fail=1 Domain D defined from D.xml diff --git a/tests/int-overflow b/tests/int-overflow index ac3119b..c9f5de9 100755 --- a/tests/int-overflow +++ b/tests/int-overflow @@ -2,16 +2,16 @@ # Ensure that an invalid domain ID isn't interpreted as a valid one. # Before, an ID of 2^32+2 would be treated just like an ID of 2. -# Boilerplate code to set up a test directory, cd into it, -# and to ensure we remove it upon completion. -this_test_() { echo "./$0" | sed 's,.*/,,'; } -t_=$(this_test_)-$$ -init_cwd_=$(pwd) -trap 'st=$?; d='"$t_"'; - cd '"$init_cwd_"' && chmod -R u+rwx "$d" && rm -rf "$d" && exit $st' 0 -trap '(exit $?); exit $?' 1 2 13 15 -mkdir "$t_" || fail=1 -cd "$t_" || fail=1 +test -z "$srcdir" && srcdir=$(pwd) +test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. +test -z "$abs_top_builddir" && abs_top_builddir=$(pwd)/.. + +if test "$VERBOSE" = yes; then + set -x + $abs_top_builddir/tools/virsh --version +fi + +. "$srcdir/test-lib.sh" echo "error: failed to get domain '4294967298'" > exp || fail=1 echo domname 4294967298 | $abs_top_builddir/tools/virsh --quiet \ diff --git a/tests/libvirtd-fail b/tests/libvirtd-fail index eeb1ee6..c6b6876 100755 --- a/tests/libvirtd-fail +++ b/tests/libvirtd-fail @@ -1,18 +1,20 @@ #!/bin/sh # Ensure that libvirt fails when given nonexistent --config=FILE +test -z "$srcdir" && srcdir=$(pwd) +test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. +test -z "$abs_top_builddir" && abs_top_builddir=$(pwd)/.. + if test "$VERBOSE" = yes; then set -x - libvirtd --version + $abs_top_builddir/daemon/libvirtd --version fi -test -z "$srcdir" && srcdir=$(pwd) -test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. . "$srcdir/test-lib.sh" fail=0 -libvirtd --config=no-such-conf --timeout=5 2> log +$abs_top_builddir/daemon/libvirtd --config=no-such-conf --timeout=5 2> log RET=$? test "$RET" != "0" && exit 0 || exit 1 diff --git a/tests/libvirtd-pool b/tests/libvirtd-pool index 59da5a6..ca1db94 100755 --- a/tests/libvirtd-pool +++ b/tests/libvirtd-pool @@ -1,20 +1,22 @@ #!/bin/sh # Get coverage of virsh pool-define-as XML formatting +test -z "$srcdir" && srcdir=$(pwd) +test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. +test -z "$abs_top_builddir" && abs_top_builddir=$(pwd)/.. + if test "$VERBOSE" = yes; then set -x - virsh --version + $abs_top_builddir/tools/virsh --version fi -test -z "$srcdir" && srcdir=$(pwd) -test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. . "$srcdir/test-lib.sh" fail=0 pwd=$(pwd) || fail=1 -virsh --connect test:///default \ +$abs_top_builddir/tools/virsh --connect test:///default \ pool-define-as --print-xml \ P dir src-host /src/path /src/dev S /target-path \ 1>out 2>&1 diff --git a/tests/read-bufsiz b/tests/read-bufsiz index 7d53735..5baa7c5 100755 --- a/tests/read-bufsiz +++ b/tests/read-bufsiz @@ -16,20 +16,21 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. +test -z "$srcdir" && srcdir=`pwd` +test -z "$abs_top_srcdir" && abs_top_srcdir=`pwd`/.. +test -z "$abs_top_builddir" && abs_top_builddir=`pwd`/.. + if test "$VERBOSE" = yes; then set -x - virsh --version + $abs_top_builddir/tools/virsh --version fi -test -z "$srcdir" && srcdir=`pwd` -test -z "$abs_top_srcdir" && abs_top_srcdir=`pwd`/.. - -. $srcdir/test-lib.sh +. "$srcdir/test-lib.sh" fail=0 # Output a valid definition, to be used as input. -virsh -c test:///default dumpxml 1 > xml || fail=1 +$abs_top_builddir/tools/virsh -c test:///default dumpxml 1 > xml || fail=1 for i in before after; do # The largest BUFSIZ I've seen is 128K. This is slightly larger. @@ -38,7 +39,7 @@ for i in before after; do # Append or prepend enough spaces to push the size over the limit: ( test $i = before && cat sp xml || cat xml sp ) > $in || fail=1 - virsh --connect test:///default define $in > out || fail=1 + $abs_top_builddir/tools/virsh --connect test:///default define $in > out || fail=1 printf "Domain test defined from $in\n\n" > exp || fail=1 compare exp out || fail=1 done diff --git a/tests/read-non-seekable b/tests/read-non-seekable index 8a7bdcd..59c2389 100755 --- a/tests/read-non-seekable +++ b/tests/read-non-seekable @@ -16,12 +16,16 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. +test -z "$srcdir" && srcdir=`pwd` +test -z "$abs_top_srcdir" && abs_top_srcdir=`pwd`/.. +test -z "$abs_top_builddir" && abs_top_builddir=`pwd`/.. + if test "$VERBOSE" = yes; then set -x - virsh --version + $abs_top_builddir/tools/virsh --version fi -. $srcdir/test-lib.sh +. "$srcdir/test-lib.sh" fail=0 @@ -40,11 +44,11 @@ cat <<\EOF > dom </domain> EOF -virsh -c test:///default define dom > /dev/null || fail=1 +$abs_top_builddir/tools/virsh -c test:///default define dom > /dev/null || fail=1 mkfifo_or_skip_ fifo cat dom > fifo & -virsh -c test:///default define fifo > /dev/null || fail=1 +$abs_top_builddir/tools/virsh -c test:///default define fifo > /dev/null || fail=1 (exit $fail); exit $fail diff --git a/tests/start b/tests/start index f457d59..930a6d9 100755 --- a/tests/start +++ b/tests/start @@ -16,13 +16,15 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. +test -z "$srcdir" && srcdir=$(pwd) +test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. +test -z "$abs_top_builddir" && abs_top_builddir=$(pwd)/.. + if test "$VERBOSE" = yes; then set -x - virsh --version + $abs_top_builddir/tools/virsh --version fi -test -z "$srcdir" && srcdir=$(pwd) -test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. . "$srcdir/test-lib.sh" fail=0 @@ -30,7 +32,7 @@ fail=0 test_url=test:///default # expect this to fail -virsh -c $test_url start test > out 2> err && fail=1 +$abs_top_builddir/tools/virsh -c $test_url start test > out 2> err && fail=1 # stdout gets a newline echo > exp || fail=1 diff --git a/tests/test_conf.sh b/tests/test_conf.sh index 62c2324..682f1f5 100755 --- a/tests/test_conf.sh +++ b/tests/test_conf.sh @@ -1,17 +1,19 @@ #!/bin/sh +test -z "$srcdir" && srcdir=$(pwd) +test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. +test -z "$abs_top_builddir" && abs_top_builddir=$(pwd)/.. +test -z "$abs_srcdir" && abs_srcdir=$(pwd) +test -z "$abs_builddir" && abs_builddir=$(pwd) + if test "$VERBOSE" = yes; then set -x - virsh --version + $abs_top_builddir/tools/virsh --version fi -. $srcdir/test-lib.sh +. "$srcdir/test-lib.sh" set -e -if test "x$abs_srcdir" = x; then - abs_srcdir=`pwd` - abs_builddir=`pwd` -fi fail=0 i=1 diff --git a/tests/undefine b/tests/undefine index fafdae7..48b0ad9 100755 --- a/tests/undefine +++ b/tests/undefine @@ -16,17 +16,21 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. +test -z "$srcdir" && srcdir=$(pwd) +test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. +test -z "$abs_top_builddir" && abs_top_builddir=$(pwd)/.. + if test "$VERBOSE" = yes; then set -x - virsh --version + $abs_top_builddir/tools/virsh --version fi -. $srcdir/test-lib.sh +. "$srcdir/test-lib.sh" fail=0 # Attempt to undefine a running domain, by domain name. -virsh -q -c test:///default undefine test > out 2>&1 +$abs_top_builddir/tools/virsh -q -c test:///default undefine test > out 2>&1 test $? = 1 || fail=1 cat <<\EOF > exp || fail=1 error: Failed to undefine domain test @@ -35,7 +39,7 @@ EOF compare exp out || fail=1 # A different diagnostic when specifying a domain ID -virsh -q -c test:///default undefine 1 > out 2>&1 +$abs_top_builddir/tools/virsh -q -c test:///default undefine 1 > out 2>&1 test $? = 1 || fail=1 cat <<\EOF > exp || fail=1 error: a running domain like 1 cannot be undefined; @@ -44,7 +48,7 @@ EOF compare exp out || fail=1 # Succeed, now: first shut down, then undefine, both via name. -virsh -q -c test:///default 'shutdown test; undefine test' > out 2>&1 +$abs_top_builddir/tools/virsh -q -c test:///default 'shutdown test; undefine test' > out 2>&1 test $? = 0 || fail=1 cat <<\EOF > exp || fail=1 Domain test is being shutdown diff --git a/tests/vcpupin b/tests/vcpupin index 79b02dc..a72ad4c 100755 --- a/tests/vcpupin +++ b/tests/vcpupin @@ -16,17 +16,21 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. +test -z "$srcdir" && srcdir=$(pwd) +test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. +test -z "$abs_top_builddir" && abs_top_builddir=$(pwd)/.. + if test "$VERBOSE" = yes; then set -x - virsh --version + $abs_top_builddir/tools/virsh --version fi -. $srcdir/test-lib.sh +. "$srcdir/test-lib.sh" fail=0 # Invalid syntax. -virsh --connect test:///default vcpupin test a 0,1 > out 2>&1 +$abs_top_builddir/tools/virsh --connect test:///default vcpupin test a 0,1 > out 2>&1 test $? = 1 || fail=1 cat <<\EOF > exp || fail=1 error: vcpupin: Invalid or missing vCPU number. @@ -35,7 +39,7 @@ EOF compare exp out || fail=1 # An out-of-range vCPU number deserves a diagnostic, too. -virsh --connect test:///default vcpupin test 100 0,1 > out 2>&1 +$abs_top_builddir/tools/virsh --connect test:///default vcpupin test 100 0,1 > out 2>&1 test $? = 1 || fail=1 cat <<\EOF > exp || fail=1 error: vcpupin: Invalid vCPU number. diff --git a/tests/virsh-all b/tests/virsh-all index 03ea466..81b3e57 100755 --- a/tests/virsh-all +++ b/tests/virsh-all @@ -16,27 +16,29 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. +test -z "$srcdir" && srcdir=$(pwd) +test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. +test -z "$abs_top_builddir" && abs_top_builddir=$(pwd)/.. + if test "$VERBOSE" = yes; then set -x - virsh --version + $abs_top_builddir/tools/virsh --version fi -test -z "$srcdir" && srcdir=$(pwd) -test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. . "$srcdir/test-lib.sh" fail=0 test_url=test:///default -virsh -c $test_url help > cmds || framework_failure +$abs_top_builddir/tools/virsh -c $test_url help > cmds || framework_failure cmds=$(sed -n 's/^ $[^ ][^ ]*$ .*/\1/p' cmds) || framework_failure test -n "$cmds" || framework_failure for i in $cmds; do echo testing $i... 1>&2 # For now, just run the command and ignore output and exit status. - virsh -c $test_url $i < /dev/null > /dev/null 2>&1 + $abs_top_builddir/tools/virsh -c $test_url $i < /dev/null > /dev/null 2>&1 done (exit $fail); exit $fail diff --git a/tests/virsh-synopsis b/tests/virsh-synopsis index 24038dd..d72e887 100755 --- a/tests/virsh-synopsis +++ b/tests/virsh-synopsis @@ -16,24 +16,27 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. +test -z "$srcdir" && srcdir=$(pwd) +test -z "$abs_top_srcdir" && abs_top_srcdir=$(pwd)/.. +test -z "$abs_top_builddir" && abs_top_builddir=$(pwd)/.. + if test "$VERBOSE" = yes; then set -x - virsh --version + $abs_top_builddir/tools/virsh --version fi -test -z "$srcdir" && srcdir=$(pwd) . "$srcdir/test-lib.sh" fail=0 test_url=test:///default -virsh -c $test_url help > cmds || framework_failure +$abs_top_builddir/tools/virsh -c $test_url help > cmds || framework_failure cmds=$(sed -n 's/^ $[^ ][^ ]*$ .*/\1/p' cmds) || framework_failure test -n "$cmds" || framework_failure for i in $cmds; do - virsh -c $test_url help $i > help || fail=1 + $abs_top_builddir/tools/virsh -c $test_url help $i > help || fail=1 grep -A1 '^ SYNOPSIS$' help > synopsis \ || { echo 1>&2 missing or invalid help SYNOPSIS for $i; fail=1; } sed -n 2p synopsis > s2 || framework_failure -- 1.6.0.6

15 years, 2 months

2
2
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Devel October 2009