[libvirt] libvirt log
by Steve Oliphant
I have a quick question. I am trying to debug a remote access problem
and have set the following parameters:
# Override the default config file
#LIBVIRTD_CONFIG=/etc/libvirt/libvirtd.conf
# Listen for TCP/IP connections
# NB. must setup TLS/SSL keys prior to using this
LIBVIRTD_ARGS="--listen --verbose"
# Override Kerberos service keytab for SASL/GSSAPI
#KRB5_KTNAME=/etc/libvirt/krb5.tab
I have not been able to find the libvirtd log.
Where is it located?
Thanks for your help
Steve
16 years, 4 months
[libvirt] [PATCH] virsh edit command
by Richard W.M. Jones
One thing which is very apparent is that sys admins using libvirt /
virsh have a great deal of difficulty understanding "where the
configuration files have gone" and how to edit them.
This patch adds a "virsh edit <domain>" command which is basically the
equivalent of:
virsh dumpxml dom > /tmp/dom.xml
$EDITOR /tmp/dom.xml && virsh define /tmp/dom.xml
but with much more sanity checking. The editor is $EDITOR or vi, and
it does the right thing if the user doesn't modify the file, or if
another user edits the configuration at the same time.
Rich.
--
Richard Jones, Emerging Technologies, Red Hat http://et.redhat.com/~rjones
virt-p2v converts physical machines to virtual machines. Boot with a
live CD or over the network (PXE) and turn machines into Xen guests.
http://et.redhat.com/~rjones/virt-p2v
16 years, 4 months
[libvirt] [PATCH] don't dump core on NULL ifname
by Guido Günther
Hi,
actually I thought I sent this out already, but it seems I didn't:
Don't dump core on NULL ifname when getting interface statistic.
Not all networking types have a target ifname set
(user,client,server,mcast).
Cheers,
-- Guido
16 years, 4 months
[libvirt] Small regression with domain refactoring
by Chris Lalancette
Hey,
I've run into another regression when using a KVM guest with libvirt tip.
If I have a guest with some XML:
<graphics type='vnc' port='-1' listen='127.0.0.1'/>
Then when I "virsh define" that guest, it ends up looking like:
<graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'/>
So far, so good. Now, when I actually "virsh start" the guest, it ends up like:
<graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'/>
That is, there is no change to the XML when the domain is running. What is
supposed to happen is that the "port" field should be filled in with the port
that libvirt ended up choosing for this guest. This is important for tools like
virt-viewer, which parse this part of the XML to find out where to connect to.
Looking at the code, I believe the problem is in
src/domain_conf.c:virDomainGraphicsDefFormat(). It looks like:
case VIR_DOMAIN_GRAPHICS_TYPE_VNC:
if (def->data.vnc.autoport)
virBufferAddLit(buf, " port='-1'");
else if (def->data.vnc.port)
virBufferVSprintf(buf, " port='%d'",
def->data.vnc.port);
The problem is that we are missing some sort of "isActive" check in there, so
that it fills in the actual port it is using if the domain is running.
Unfortunately, from a quick perusal, I couldn't easily figure out how to do
this; does someone have a suggestion on how to fix this?
Thanks,
Chris Lalancette
16 years, 4 months
[libvirt] [PATCH] Fix logical storage pool operation on SLES10-SP2
by David Lively
The attached patch adjusts for a difference in behavior in the LVM
utilities 'lvs' and 'vgs'. The SLES10-SP2 versions of these (and
presumably others) append a trailing separator. This patch simply
adjusts the regexps to allow (but not require) this.
I thought just adding the ":?" to the regexps would do this, but this
was leaving the trailing separator in the last group match, so I ended
up tweaking the preceding group pattern as well.
Dave
16 years, 4 months
[Libvir] [PATCH] Add bus attribute to disk target definition
by Soren Hansen
Hi!
I'd like to propose that the following patch gets applied against
libvirt. It adds the option of putting a bus attribute on a disk target.
To acommodate this, it also changes the way drives are defined for kvm
from the old "-hda /path/to/file -boot c" style to the new "-drive
file=/path/to/file,if=ide,boot=on". This makes it possible to specify
virtio, scsi, and ide disks.
=== modified file 'src/qemu_conf.c'
--- src/qemu_conf.c 2008-04-28 15:14:59 +0000
+++ src/qemu_conf.c 2008-04-29 07:43:11 +0000
@@ -568,6 +568,7 @@
xmlChar *source = NULL;
xmlChar *target = NULL;
xmlChar *type = NULL;
+ xmlChar *bus = NULL;
int typ = 0;
type = xmlGetProp(node, BAD_CAST "type");
@@ -598,6 +599,7 @@
} else if ((target == NULL) &&
(xmlStrEqual(cur->name, BAD_CAST "target"))) {
target = xmlGetProp(cur, BAD_CAST "dev");
+ bus = xmlGetProp(cur, BAD_CAST "bus");
} else if (xmlStrEqual(cur->name, BAD_CAST "readonly")) {
disk->readonly = 1;
}
@@ -646,7 +648,9 @@
strcmp((const char *)target, "hda") &&
strcmp((const char *)target, "hdb") &&
strcmp((const char *)target, "hdc") &&
- strcmp((const char *)target, "hdd")) {
+ strcmp((const char *)target, "hdd") &&
+ strcmp((const char *)target, "hdd") &&
+ strncmp((const char *)target, "vd", 2)) {
qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR,
_("Invalid harddisk device name: %s"), target);
goto error;
@@ -673,6 +677,20 @@
goto error;
}
+ if (!bus)
+ disk->bus = QEMUD_DISK_BUS_IDE;
+ else if (!strcmp((const char *)bus, "ide"))
+ disk->bus = QEMUD_DISK_BUS_IDE;
+ else if (!strcmp((const char *)bus, "scsi"))
+ disk->bus = QEMUD_DISK_BUS_SCSI;
+ else if (!strcmp((const char *)bus, "virtio"))
+ disk->bus = QEMUD_DISK_BUS_VIRTIO;
+ else {
+ qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, "Invalid bus type: %s", bus);
+ goto error;
+ }
+
+ xmlFree(bus);
xmlFree(device);
xmlFree(target);
xmlFree(source);
@@ -688,6 +706,8 @@
xmlFree(source);
if (device)
xmlFree(device);
+ if (bus)
+ xmlFree(bus);
return -1;
}
@@ -1350,6 +1370,68 @@
return -1;
}
+static int qemudDiskCompare(const void *aptr, const void *bptr) {
+ struct qemud_vm_disk_def *a = (struct qemud_vm_disk_def *) aptr;
+ struct qemud_vm_disk_def *b = (struct qemud_vm_disk_def *) bptr;
+ if (a->device == b->device)
+ return virDiskNameToIndex(a->dst) - virDiskNameToIndex(b->dst);
+ else
+ return a->device - b->device;
+}
+
+static const char *qemudBusIdToName(int busId) {
+ const char *busnames[] = { "ide",
+ "scsi",
+ "virtio" };
+
+ if (busId >= 0 && busId < 3)
+ return busnames[busId];
+ else
+ return 0;
+}
+
+static char *qemudDriveOpt(struct qemud_vm_disk_def *disk, int boot)
+{
+ char opt[PATH_MAX];
+
+ switch (disk->device) {
+ case QEMUD_DISK_CDROM:
+ snprintf(opt, PATH_MAX, "file=%s,if=ide,media=cdrom%s",
+ disk->src, boot ? ",boot=on" : "");
+ break;
+ case QEMUD_DISK_FLOPPY:
+ snprintf(opt, PATH_MAX, "file=%s,if=floppy%s",
+ disk->src, boot ? ",boot=on" : "");
+ break;
+ case QEMUD_DISK_DISK:
+ snprintf(opt, PATH_MAX, "file=%s,if=%s%s",
+ disk->src, qemudBusIdToName(disk->bus), boot ? ",boot=on" : "");
+ break;
+ default:
+ return 0;
+ }
+ return strdup(opt);
+}
+
+static char *qemudAddBootDrive(virConnectPtr conn,
+ struct qemud_vm_def *def,
+ char *handledDisks,
+ int type) {
+ int j = 0;
+ struct qemud_vm_disk_def *disk = def->disks;
+
+ while (disk) {
+ if (!handledDisks[j] && disk->device == type) {
+ handledDisks[j] = 1;
+ return qemudDriveOpt(disk, 1);
+ }
+ j++;
+ disk = disk->next;
+ }
+ qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR,
+ "Requested boot device type %d, but no such device defined.", type);
+ return 0;
+}
/*
* Parses a libvirt XML definition of a guest, and populates the
@@ -1739,7 +1821,6 @@
obj = xmlXPathEval(BAD_CAST "/domain/devices/disk", ctxt);
if ((obj != NULL) && (obj->type == XPATH_NODESET) &&
(obj->nodesetval != NULL) && (obj->nodesetval->nodeNr >= 0)) {
- struct qemud_vm_disk_def *prev = NULL;
for (i = 0; i < obj->nodesetval->nodeNr; i++) {
struct qemud_vm_disk_def *disk = calloc(1, sizeof(*disk));
if (!disk) {
@@ -1752,13 +1833,20 @@
goto error;
}
def->ndisks++;
- disk->next = NULL;
if (i == 0) {
+ disk->next = NULL;
def->disks = disk;
} else {
- prev->next = disk;
+ struct qemud_vm_disk_def *ptr = def->disks;
+ while (ptr) {
+ if (!ptr->next || qemudDiskCompare(ptr->next, disk) < 0) {
+ disk->next = ptr->next;
+ ptr->next = disk;
+ break;
+ }
+ ptr = ptr->next;
+ }
}
- prev = disk;
}
}
xmlXPathFreeObject(obj);
@@ -2207,30 +2295,32 @@
goto no_memory;
}
- for (i = 0 ; i < vm->def->os.nBootDevs ; i++) {
- switch (vm->def->os.bootDevs[i]) {
- case QEMUD_BOOT_CDROM:
- boot[i] = 'd';
- break;
- case QEMUD_BOOT_FLOPPY:
- boot[i] = 'a';
- break;
- case QEMUD_BOOT_DISK:
- boot[i] = 'c';
- break;
- case QEMUD_BOOT_NET:
- boot[i] = 'n';
- break;
- default:
- boot[i] = 'c';
- break;
+ if (vm->def->virtType != QEMUD_VIRT_KVM) {
+ for (i = 0 ; i < vm->def->os.nBootDevs ; i++) {
+ switch (vm->def->os.bootDevs[i]) {
+ case QEMUD_BOOT_CDROM:
+ boot[i] = 'd';
+ break;
+ case QEMUD_BOOT_FLOPPY:
+ boot[i] = 'a';
+ break;
+ case QEMUD_BOOT_DISK:
+ boot[i] = 'c';
+ break;
+ case QEMUD_BOOT_NET:
+ boot[i] = 'n';
+ break;
+ default:
+ boot[i] = 'c';
+ break;
+ }
}
+ boot[vm->def->os.nBootDevs] = '\0';
+ if (!((*argv)[++n] = strdup("-boot")))
+ goto no_memory;
+ if (!((*argv)[++n] = strdup(boot)))
+ goto no_memory;
}
- boot[vm->def->os.nBootDevs] = '\0';
- if (!((*argv)[++n] = strdup("-boot")))
- goto no_memory;
- if (!((*argv)[++n] = strdup(boot)))
- goto no_memory;
if (vm->def->os.kernel[0]) {
if (!((*argv)[++n] = strdup("-kernel")))
@@ -2251,28 +2341,74 @@
goto no_memory;
}
- while (disk) {
- char dev[NAME_MAX];
- char file[PATH_MAX];
- if (!strcmp(disk->dst, "hdc") &&
- disk->device == QEMUD_DISK_CDROM) {
- if (disk->src[0])
- snprintf(dev, NAME_MAX, "-%s", "cdrom");
- else {
- /* Don't put anything on the cmdline for an empty cdrom*/
- disk = disk->next;
- continue;
- }
- } else
- snprintf(dev, NAME_MAX, "-%s", disk->dst);
- snprintf(file, PATH_MAX, "%s", disk->src);
-
- if (!((*argv)[++n] = strdup(dev)))
- goto no_memory;
- if (!((*argv)[++n] = strdup(file)))
- goto no_memory;
-
- disk = disk->next;
+ if (vm->def->virtType == QEMUD_VIRT_KVM) {
+ char *handledDisks = NULL;
+ int j;
+
+ handledDisks = calloc(sizeof(*handledDisks), vm->def->ndisks);
+
+ if (!handledDisks)
+ goto no_memory;
+
+ /* When using -drive notation, we need to provide the devices in boot
+ * preference order. */
+ for (i = 0 ; i < vm->def->os.nBootDevs ; i++) {
+ if (!((*argv)[++n] = strdup("-drive")))
+ goto no_memory;
+
+ switch (vm->def->os.bootDevs[i]) {
+ case QEMUD_BOOT_CDROM:
+ if (!((*argv)[++n] = qemudAddBootDrive(conn, vm->def, handledDisks, QEMUD_DISK_CDROM)))
+ goto error;
+ break;
+ case QEMUD_BOOT_FLOPPY:
+ if (!((*argv)[++n] = qemudAddBootDrive(conn, vm->def, handledDisks, QEMUD_DISK_FLOPPY)))
+ goto error;
+ break;
+ case QEMUD_BOOT_DISK:
+ if (!((*argv)[++n] = qemudAddBootDrive(conn, vm->def, handledDisks, QEMUD_DISK_DISK)))
+ goto error;
+ break;
+ }
+ }
+
+ /* Pick up the rest of the devices */
+ j=0;
+ while (disk) {
+ if (!handledDisks[j]) {
+ handledDisks[j] = 1;
+ if (!((*argv)[++n] = strdup("-drive")))
+ goto no_memory;
+ if (!((*argv)[++n] = qemudDriveOpt(disk, 0)))
+ goto no_memory;
+ }
+ disk = disk->next;
+ j++;
+ }
+ } else {
+ while (disk) {
+ char dev[NAME_MAX];
+ char file[PATH_MAX];
+
+ if (!strcmp(disk->dst, "hdc") &&
+ disk->device == QEMUD_DISK_CDROM)
+ if (disk->src[0])
+ snprintf(dev, NAME_MAX, "-%s", "cdrom");
+ else {
+ disk = disk->next;
+ continue;
+ }
+ else
+ snprintf(dev, NAME_MAX, "-%s", disk->dst);
+ snprintf(file, PATH_MAX, "%s", disk->src);
+
+ if (!((*argv)[++n] = strdup(dev)))
+ goto no_memory;
+ if (!((*argv)[++n] = strdup(file)))
+ goto no_memory;
+
+ disk = disk->next;
+ }
}
if (!net) {
@@ -3565,6 +3701,7 @@
virBufferVSprintf(&buf, " <source %s='%s'/>\n",
typeAttrs[disk->type], disk->src);
+ virBufferVSprintf(&buf, " <target dev='%s' bus='%s'/>\n", disk->dst, qemudBusIdToName(disk->bus));
virBufferVSprintf(&buf, " <target dev='%s'/>\n", disk->dst);
if (disk->readonly)
=== modified file 'src/qemu_conf.h'
--- src/qemu_conf.h 2008-04-25 20:46:13 +0000
+++ src/qemu_conf.h 2008-04-29 07:13:16 +0000
@@ -56,10 +56,17 @@
QEMUD_DISK_FLOPPY,
};
+enum qemud_vm_disk_bus {
+ QEMUD_DISK_BUS_IDE,
+ QEMUD_DISK_BUS_SCSI,
+ QEMUD_DISK_BUS_VIRTIO
+};
+
/* Stores the virtual disk configuration */
struct qemud_vm_disk_def {
int type;
int device;
+ int bus;
char src[PATH_MAX];
char dst[NAME_MAX];
int readonly;
=== modified file 'src/util.c'
--- src/util.c 2008-04-25 14:53:05 +0000
+++ src/util.c 2008-04-29 06:59:49 +0000
@@ -771,3 +771,43 @@
return -1;
}
+
+/* Translates a device name of the form (regex) "[fhv]d[a-z]+" into
+ * the corresponding index (e.g. sda => 1, hdz => 26, vdaa => 27)
+ * @param name The name of the device
+ * @return name's index, or 0 on failure
+ */
+int virDiskNameToIndex(const char *name) {
+ const char *ptr = NULL;
+ int idx = 0;
+
+ if (strlen(name) < 3)
+ return 0;
+
+ switch (*name) {
+ case 'f':
+ case 'h':
+ case 'v':
+ break;
+ default:
+ return 0;
+ }
+
+ if (*(name + 1) != 'd')
+ return 0;
+
+ ptr = name+2;
+
+ while (*ptr) {
+ idx = idx * 26;
+
+ if ('a' > *ptr || 'z' < *ptr)
+ return 0;
+
+ idx += *ptr - 'a' + 1;
+ ptr++;
+ }
+
+ return idx;
+}
+
=== modified file 'src/util.h'
--- src/util.h 2008-04-25 14:53:05 +0000
+++ src/util.h 2008-04-29 06:59:57 +0000
@@ -92,4 +92,6 @@
int virParseMacAddr(const char* str, unsigned char *addr);
+int virDiskNameToIndex(const char* str);
+
#endif /* __VIR_UTIL_H__ */
--
Soren Hansen |
Virtualisation specialist | Ubuntu Server Team
Canonical Ltd. | http://www.ubuntu.com/
16 years, 4 months
[libvirt] [PATCH]: Fix Qemu CD-ROM with no source
by Chris Lalancette
The new generic domain re-factor introduced a small regression into the drive
handling code. In particular, if you had a section of XML like:
<disk type='file' device='cdrom'>
<target dev='hdc' bus='ide'/>
<readonly/>
</disk>
This used to work with older libvirt, but now fails. This is because we are
actually passing the literal string (null) to the qemu command-line, which qemu
barfs on. This patch fixes it up by making it blank, which allows qemu to
continue on it's merry way.
Signed-off-by: Chris Lalancette <clalance(a)redhat.com>
16 years, 4 months
