1:04 p.m.
I am working with virsh
The version of VIRSH as it shows is :
virsh # version
Compiled against library: libvir 0.4.4
Using library: libvir 0.4.4
Using API: QEMU 0.4.4
Running hypervisor: QEMU 0.9.1
Under virsh I do the following :
1. suspend a running VM
2. save it to a file with the 'save' command
3. restore the saved domain file with the 'restore' command while the
domain is still in the suspend mode
or after it was shutdown/destroyed (not seen with 'list --all)
In either case I get the error message saying :
virsh # restore /home/dubi/xml/vm_dubi2.sav
libvir: QEMU error : operation failed: failed to start VM
error: Failed to restore domain from /home/dubi/xml/vm_dubi2.xml
Any idea what is the failure reason ?
The content of the saved domain file isattached:
Zvi Dubitzky
Virtualization and System Architecture Email:dubi@il.ibm.com
IBM Haifa Research Laboratory Phone: +972-4-8296182
Haifa, 31905, ISRAEL
4:36 a.m.
On Sun, Mar 22, 2009 at 08:04:17PM +0200, Zvi Dubitzky wrote:
I am working with virsh
The version of VIRSH as it shows is :
virsh # version
Compiled against library: libvir 0.4.4
Using library: libvir 0.4.4
Using API: QEMU 0.4.4
Running hypervisor: QEMU 0.9.1
Under virsh I do the following :
1. suspend a running VM
2. save it to a file with the 'save' command
3. restore the saved domain file with the 'restore' command while the
domain is still in the suspend mode
or after it was shutdown/destroyed (not seen with 'list --all)
In either case I get the error message saying :
virsh # restore /home/dubi/xml/vm_dubi2.sav
libvir: QEMU error : operation failed: failed to start VM
error: Failed to restore domain from /home/dubi/xml/vm_dubi2.xml
Any idea what is the failure reason ?
Check the /var/log/libvirt/qemu/$HOME.log file for more information from
QEMU
Daniel
--
|: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :|
|: http://libvirt.org -o- http://virt-manager.org -o- http://ovirt.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
6:03 a.m.
Here is the /var/log/libvirt/qemu/vm_dubi2.log file. It shows a trailing
'-incoming stdio' which is rejected by QEMU,
The rest is correct and is probably the translation of the XML.
The XML as appears in the saved file vm_dubi2.sav (also below) looks
fine . But that file has some prefix binary section which I do not know
its content
Again , the saved VM state file is :
thanks
Zvi Dubitzky
Virtualization and System Architecture Email:dubi@il.ibm.com
IBM Haifa Research Laboratory Phone: +972-4-8296182
Haifa, 31905, ISRAEL
"Daniel P. Berrange" <berrange(a)redhat.com>
Sent by: libvir-list-bounces(a)redhat.com
23/03/2009 11:36
Please respond to
"Daniel P. Berrange" <berrange(a)redhat.com>
To
Zvi Dubitzky/Haifa/IBM@IBMIL
cc
libvir-list(a)redhat.com
Subject
Re: [libvirt] save/ restore a domain with kvm
On Sun, Mar 22, 2009 at 08:04:17PM +0200, Zvi Dubitzky wrote:
I am working with virsh
The version of VIRSH as it shows is :
virsh # version
Compiled against library: libvir 0.4.4
Using library: libvir 0.4.4
Using API: QEMU 0.4.4
Running hypervisor: QEMU 0.9.1
Under virsh I do the following :
1. suspend a running VM
2. save it to a file with the 'save' command
3. restore the saved domain file with the 'restore' command while the
domain is still in the suspend mode
or after it was shutdown/destroyed (not seen with 'list --all)
In either case I get the error message saying :
virsh # restore /home/dubi/xml/vm_dubi2.sav
libvir: QEMU error : operation failed: failed to start VM
error: Failed to restore domain from /home/dubi/xml/vm_dubi2.xml
Any idea what is the failure reason ?
Check the /var/log/libvirt/qemu/$HOME.log file for more information from
QEMU
Daniel
--
|: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/
:|
|: http://libvirt.org -o- http://virt-manager.org -o- http://ovirt.org
:|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/
:|
|: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505
:|
--
Libvir-list mailing list
Libvir-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
8:18 a.m.
Forgot to say: I am working with kvm-72
Does that have implication on the correctness of the save/restore of VM
state ?
Zvi Dubitzky
Virtualization and System Architecture Email:dubi@il.ibm.com
IBM Haifa Research Laboratory Phone: +972-4-8296182
Haifa, 31905, ISRAEL
"Daniel P. Berrange" <berrange(a)redhat.com>
23/03/2009 11:36
Please respond to
"Daniel P. Berrange" <berrange(a)redhat.com>
To
Zvi Dubitzky/Haifa/IBM@IBMIL
cc
libvir-list(a)redhat.com
Subject
Re: [libvirt] save/ restore a domain with kvm
On Sun, Mar 22, 2009 at 08:04:17PM +0200, Zvi Dubitzky wrote:
I am working with virsh
The version of VIRSH as it shows is :
virsh # version
Compiled against library: libvir 0.4.4
Using library: libvir 0.4.4
Using API: QEMU 0.4.4
Running hypervisor: QEMU 0.9.1
Under virsh I do the following :
1. suspend a running VM
2. save it to a file with the 'save' command
3. restore the saved domain file with the 'restore' command while the
domain is still in the suspend mode
or after it was shutdown/destroyed (not seen with 'list --all)
In either case I get the error message saying :
virsh # restore /home/dubi/xml/vm_dubi2.sav
libvir: QEMU error : operation failed: failed to start VM
error: Failed to restore domain from /home/dubi/xml/vm_dubi2.xml
Any idea what is the failure reason ?
Check the /var/log/libvirt/qemu/$HOME.log file for more information from
QEMU
Daniel
--
|: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/
:|
|: http://libvirt.org -o- http://virt-manager.org -o- http://ovirt.org
:|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/
:|
|: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505
:|
8:24 a.m.
Zvi Dubitzky wrote:
Forgot to say: I am working with kvm-72
Does that have implication on the correctness of the save/restore of VM
state ?
Save-restore on upstream kvm versions is rather error prone.
I'm note sure one version is better than the other. Evan today mainline
kvm's
migration is not stable. We'll send patches this week to fix that.
So bottom line, if it works for you, use it.
Zvi Dubitzky
Virtualization and System Architecture Email:dubi@il.ibm.com
IBM Haifa Research Laboratory Phone: +972-4-8296182
Haifa, 31905, ISRAEL
"Daniel P. Berrange" <berrange(a)redhat.com>
23/03/2009 11:36
Please respond to
"Daniel P. Berrange" <berrange(a)redhat.com>
To
Zvi Dubitzky/Haifa/IBM@IBMIL
cc
libvir-list(a)redhat.com
Subject
Re: [libvirt] save/ restore a domain with kvm
On Sun, Mar 22, 2009 at 08:04:17PM +0200, Zvi Dubitzky wrote:
> I am working with virsh
>
> The version of VIRSH as it shows is :
> virsh # version
> Compiled against library: libvir 0.4.4
> Using library: libvir 0.4.4
> Using API: QEMU 0.4.4
> Running hypervisor: QEMU 0.9.1
>
> Under virsh I do the following :
> 1. suspend a running VM
> 2. save it to a file with the 'save' command
> 3. restore the saved domain file with the 'restore' command while the
> domain is still in the suspend mode
> or after it was shutdown/destroyed (not seen with 'list --all)
> In either case I get the error message saying :
>
> virsh # restore /home/dubi/xml/vm_dubi2.sav
> libvir: QEMU error : operation failed: failed to start VM
> error: Failed to restore domain from /home/dubi/xml/vm_dubi2.xml
>
> Any idea what is the failure reason ?
>
Check the /var/log/libvirt/qemu/$HOME.log file for more information from
QEMU
Daniel
10:07 a.m.
Thanks
a Question if I may.
Are you familiar with the cpuTime of a VM that we get by libvirt from
virDomainInfoPtr struct .
Is that the real cpuTime of all the vcpus of a VM together ?
e.g if I sample this cpuTime at 2 times apart by 'n' secs and get
cpuTime1 and cpuTime2 , then if the VM has 4 vcpus and they are fully
utilized,
I will get : (vcpuTime- vcpuTime1) = 4 *n . That is each of the 4
vcpus are fully utilizing the 'n' secs .
thanks
Zvi Dubitzky
Virtualization and System Architecture Email:dubi@il.ibm.com
IBM Haifa Research Laboratory Phone: +972-4-8296182
Haifa, 31905, ISRAEL
Dor Laor <dlaor(a)redhat.com>
23/03/2009 15:24
Please respond to
dlaor(a)redhat.com
To
Zvi Dubitzky/Haifa/IBM@IBMIL
cc
"Daniel P. Berrange" <berrange(a)redhat.com>, libvir-list(a)redhat.com
Subject
Re: [libvirt] save/ restore a domain with kvm
Zvi Dubitzky wrote:
Forgot to say: I am working with kvm-72
Does that have implication on the correctness of the save/restore of VM
state ?
Save-restore on upstream kvm versions is rather error prone.
I'm note sure one version is better than the other. Evan today mainline
kvm's
migration is not stable. We'll send patches this week to fix that.
So bottom line, if it works for you, use it.
Zvi Dubitzky
Virtualization and System Architecture Email:dubi@il.ibm.com
IBM Haifa Research Laboratory Phone: +972-4-8296182
Haifa, 31905, ISRAEL
"Daniel P. Berrange" <berrange(a)redhat.com>
23/03/2009 11:36
Please respond to
"Daniel P. Berrange" <berrange(a)redhat.com>
To
Zvi Dubitzky/Haifa/IBM@IBMIL
cc
libvir-list(a)redhat.com
Subject
Re: [libvirt] save/ restore a domain with kvm
On Sun, Mar 22, 2009 at 08:04:17PM +0200, Zvi Dubitzky wrote:
> I am working with virsh
>
> The version of VIRSH as it shows is :
> virsh # version
> Compiled against library: libvir 0.4.4
> Using library: libvir 0.4.4
> Using API: QEMU 0.4.4
> Running hypervisor: QEMU 0.9.1
>
> Under virsh I do the following :
> 1. suspend a running VM
> 2. save it to a file with the 'save' command
> 3. restore the saved domain file with the 'restore' command while the
> domain is still in the suspend mode
> or after it was shutdown/destroyed (not seen with 'list --all)
> In either case I get the error message saying :
>
> virsh # restore /home/dubi/xml/vm_dubi2.sav
> libvir: QEMU error : operation failed: failed to start VM
> error: Failed to restore domain from /home/dubi/xml/vm_dubi2.xml
>
> Any idea what is the failure reason ?
>
Check the /var/log/libvirt/qemu/$HOME.log file for more information from
QEMU
Daniel
5757
days inactive
5759
days old
5 comments
3 participants
participants (3)
-
Daniel P. Berrange -
Dor Laor -
Zvi Dubitzky