Using 'domain-id' to represent domain name, domain id or uuid, as introduced in the DOMAIN COMMANDS section. --- tools/virsh.pod | 86 +++++++++++++++++++++++++++--------------------------- 1 files changed, 43 insertions(+), 43 deletions(-) diff --git a/tools/virsh.pod b/tools/virsh.pod index 4bddf15..ed1efde 100644 --- a/tools/virsh.pod +++ b/tools/virsh.pod @@ -580,11 +580,11 @@ If I<--graceful> is specified, don't resort to extreme measures (e.g. SIGKILL) when the guest doesn't stop after a reasonable timeout; return an error instead. -=item B<domblkstat> I<domain> I<block-device> [I<--human>] +=item B<domblkstat> I<domain-id> I<block-device> [I<--human>] Get device block stats for a running domain. A I<block-device> corresponds to a unique target name (<target dev='name'/>) or source file (<source -file='name'/>) for one of the disk devices attached to I<domain> (see +file='name'/>) for one of the disk devices attached to I<domain-id> (see also B<domblklist> for listing these names). Use I<--human> for a more human readable output. @@ -605,11 +605,11 @@ B<Explanation of fields> (fields appear in the folowing order): flush_total_times - total time flush operations took (ns) <-- other fields provided by hypervisor --> -=item B<domifstat> I<domain> I<interface-device> +=item B<domifstat> I<domain-id> I<interface-device> Get network interface stats for a running domain. -=item B<domif-setlink> I<domain> I<interface-device> I<state> [I<--config>] +=item B<domif-setlink> I<domain-id> I<interface-device> I<state> [I<--config>] Modify link state of the domain's virtual interface. Possible values for state are "up" and "down. If I<--config> is specified, only the persistent @@ -617,7 +617,7 @@ configuration of the domain is modified, for compatibility purposes, I<--persistent> is alias of I<--config>. I<interface-device> can be the interface's target name or the MAC address. -=item B<domif-getlink> I<domain> I<interface-device> [I<--config>] +=item B<domif-getlink> I<domain-id> I<interface-device> [I<--config>] Query link state of the domain's virtual interface. If I<--config> is specified, query the persistent configuration, for compatibility @@ -625,7 +625,7 @@ purposes, I<--persistent> is alias of I<--config>. I<interface-device> can be the interface's target name or the MAC address. -=item B<domiftune> I<domain> I<interface-device> +=item B<domiftune> I<domain-id> I<interface-device> [[I<--config>] [I<--live>] | [I<--current>]] [I<--inbound average,peak,burst>] [I<--outbound average,peak,burst>] @@ -646,7 +646,7 @@ Both I<--live> and I<--current> flags may be given, but I<--current> is exclusive. If no flag is specified, behavior is different depending on hypervisor. -=item B<dommemstat> I<domain> +=item B<dommemstat> I<domain-id> Get memory stats for a running domain. @@ -657,17 +657,17 @@ B<domstate> command says that a domain was paused due to I/O error. The B<domblkerror> command lists all block devices in error state and the error seen on each of them. -=item B<domblkinfo> I<domain> I<block-device> +=item B<domblkinfo> I<domain-id> I<block-device> Get block device size info for a domain. A I<block-device> corresponds to a unique target name (<target dev='name'/>) or source file (<source -file='name'/>) for one of the disk devices attached to I<domain> (see +file='name'/>) for one of the disk devices attached to I<domain-id> (see also B<domblklist> for listing these names). -=item B<domblklist> I<domain> [I<--inactive>] [I<--details>] +=item B<domblklist> I<domain-id> [I<--inactive>] [I<--details>] Print a table showing the brief information of all block devices -associated with I<domain>. If I<--inactive> is specified, query the +associated with I<domain-id>. If I<--inactive> is specified, query the block devices that will be used on the next boot, rather than those currently in use by a running domain. If I<--details> is specified, disk type and device value will also be printed. Other contexts @@ -675,16 +675,16 @@ that require a block device name (such as I<domblkinfo> or I<snapshot-create> for disk snapshots) will accept either target or unique source names printed by this command. -=item B<domiflist> I<domain> [I<--inactive>] +=item B<domiflist> I<domain-id> [I<--inactive>] Print a table showing the brief information of all virtual interfaces -associated with I<domain>. If I<--inactive> is specified, query the +associated with I<domain-id>. If I<--inactive> is specified, query the virtual interfaces that will be used on the next boot, rather than those currently in use by a running domain. Other contexts that require a MAC address of virtual interface (such as I<detach-interface> or I<domif-setlink>) will accept the MAC address printed by this command. -=item B<blockcopy> I<domain> I<path> I<dest> [I<bandwidth>] [I<--shallow>] +=item B<blockcopy> I<domain-id> I<path> I<dest> [I<bandwidth>] [I<--shallow>] [I<--reuse-external>] [I<--raw>] [I<--wait> [I<--verbose] [{I<--pivot> | I<--finish>}] [I<--timeout> B<seconds>] [I<--async>]] @@ -725,7 +725,7 @@ is done cleaning up. I<path> specifies fully-qualified path of the disk. I<bandwidth> specifies copying bandwidth limit in Mbps. -=item B<blockpull> I<domain> I<path> [I<bandwidth>] [I<base>] +=item B<blockpull> I<domain-id> I<path> [I<bandwidth>] [I<base>] [I<--wait> [I<--verbose>] [I<--timeout> B<seconds>] [I<--async]] Populate a disk from its backing image chain. By default, this command @@ -748,19 +748,19 @@ longer until the job is done cleaning up. I<path> specifies fully-qualified path of the disk; it corresponds to a unique target name (<target dev='name'/>) or source file (<source -file='name'/>) for one of the disk devices attached to I<domain> (see +file='name'/>) for one of the disk devices attached to I<domain-id> (see also B<domblklist> for listing these names). I<bandwidth> specifies copying bandwidth limit in Mbps. -=item B<blkdeviotune> I<domain> I<device> +=item B<blkdeviotune> I<domain-id> I<device> [[I<--config>] [I<--live>] | [I<--current>]] [[I<total-bytes-sec>] | [I<read-bytes-sec>] [I<write-bytes-sec>]] [[I<total-iops-sec>] | [I<read-iops-sec>] [I<write-iops-sec>]] -Set or query the block disk io parameters for a block device of I<domain>. +Set or query the block disk io parameters for a block device of I<domain-id>. I<device> specifies a unique target name (<target dev='name'/>) or source file (<source file='name'/>) for one of the disk devices attached to -I<domain> (see also B<domblklist> for listing these names). +I<domain-id> (see also B<domblklist> for listing these names). If no limit is specified, it will query current I/O limits setting. Otherwise, alter the limits with these flags: @@ -786,7 +786,7 @@ Both I<--live> and I<--current> flags may be given, but I<--current> is exclusive. If no flag is specified, behavior is different depending on hypervisor. -=item B<blockjob> I<domain> I<path> { [I<--abort>] [I<--async>] [I<--pivot>] | +=item B<blockjob> I<domain-id> I<path> { [I<--abort>] [I<--async>] [I<--pivot>] | [I<--info>] | [I<bandwidth>] } Manage active block operations. There are three modes: I<--info>, @@ -795,7 +795,7 @@ or I<--pivot> implies I<--abort>. I<path> specifies fully-qualified path of the disk; it corresponds to a unique target name (<target dev='name'/>) or source file (<source -file='name'/>) for one of the disk devices attached to I<domain> (see +file='name'/>) for one of the disk devices attached to I<domain-id> (see also B<domblklist> for listing these names). If I<--abort> is specified, the active job on the specified disk will @@ -807,12 +807,12 @@ If I<--info> is specified, the active job information on the specified disk will be printed. I<bandwidth> can be used to set bandwidth limit for the active job. -=item B<blockresize> I<domain> I<path> I<size> +=item B<blockresize> I<domain-id> I<path> I<size> Resize a block device of domain while the domain is running, I<path> specifies the absolute path of the block device; it corresponds to a unique target name (<target dev='name'/>) or source file (<source -file='name'/>) for one of the disk devices attached to I<domain> (see +file='name'/>) for one of the disk devices attached to I<domain-id> (see also B<domblklist> for listing these names). I<size> is a scaled integer (see B<NOTES> above) which defaults to KiB @@ -838,11 +838,11 @@ Convert a domain name or id to domain UUID Convert a domain name (or UUID) to a domain id -=item B<domjobabort> I<domain-id-or-uuid> +=item B<domjobabort> I<domain-id> Abort the currently running domain job. -=item B<domjobinfo> I<domain-id-or-uuid> +=item B<domjobinfo> I<domain-id> Returns information about jobs running on a domain. @@ -959,7 +959,7 @@ Provide the maximum number of virtual CPUs supported for a guest VM on this connection. If provided, the I<type> parameter must be a valid type attribute for the <domain> element of XML. -=item B<cpu-stats> I<domain> [I<--total>] [I<start>] [I<count>] +=item B<cpu-stats> I<domain-id> [I<--total>] [I<start>] [I<count>] Provide cpu statistics information of a domain. The domain should be running. Default it shows stats for all CPUs, and a total. Use @@ -1045,7 +1045,7 @@ migrated to another host. Get the maximum migration bandwidth (in Mbps) for a domain. -=item B<numatune> I<domain> [I<--mode> B<mode>] [I<--nodeset> B<nodeset>] +=item B<numatune> I<domain-id> [I<--mode> B<mode>] [I<--nodeset> B<nodeset>] [[I<--config>] [I<--live>] | [I<--current>]] Set or get a domain's numa parameters, corresponding to the <numatune> @@ -1470,7 +1470,7 @@ By default the hypervisor will try to pick a suitable shutdown method. To specify an alternative method, the I<--mode> parameter can specify C<acpi> or C<agent>. -=item B<start> I<domain-name> [I<--console>] [I<--paused>] [I<--autodestroy>] +=item B<start> I<domain-name-or-uuid> [I<--console>] [I<--paused>] [I<--autodestroy>] [I<--bypass-cache>] [I<--force-boot>] Start a (previously defined) inactive domain, either from the last @@ -2424,11 +2424,11 @@ used to represent properties of snapshots. =over 4 -=item B<snapshot-create> I<domain> [I<xmlfile>] {[I<--redefine> [I<--current>]] +=item B<snapshot-create> I<domain-id> [I<xmlfile>] {[I<--redefine> [I<--current>]] | [I<--no-metadata>] [I<--halt>] [I<--disk-only>] [I<--reuse-external>] [I<--quiesce>] [I<--atomic>]} -Create a snapshot for domain I<domain> with the properties specified in +Create a snapshot for domain I<domain-id> with the properties specified in I<xmlfile>. Normally, the only properties settable for a domain snapshot are the <name> and <description> elements, as well as <disks> if I<--disk-only> is given; the rest of the fields are @@ -2484,12 +2484,12 @@ a persistent domain. However, for transient domains, snapshot metadata is silently lost when the domain quits running (whether by command such as B<destroy> or by internal guest action). -=item B<snapshot-create-as> I<domain> {[I<--print-xml>] +=item B<snapshot-create-as> I<domain-id> {[I<--print-xml>] | [I<--no-metadata>] [I<--halt>] [I<--reuse-external>]} [I<name>] [I<description>] [I<--disk-only> [I<--quiesce>] [I<--atomic>] [[I<--diskspec>] B<diskspec>]...] -Create a snapshot for domain I<domain> with the given <name> and +Create a snapshot for domain I<domain-id> with the given <name> and <description>; if either value is omitted, libvirt will choose a value. If I<--print-xml> is specified, then XML appropriate for I<snapshot-create> is output, rather than actually creating a snapshot. @@ -2503,7 +2503,7 @@ arguments to add <disk> elements to the xml. Each <diskspec> is in the form B<disk[,snapshot=type][,driver=type][,file=name]>. To include a literal comma in B<disk> or in B<file=name>, escape it with a second comma. A literal I<--diskspec> must preceed each B<diskspec> unless -all three of I<domain>, I<name>, and I<description> are also present. +all three of I<domain-id>, I<name>, and I<description> are also present. For example, a diskspec of "vda,snapshot=external,file=/path/to,,new" results in the following XML: <disk name='vda' snapshot='external'> @@ -2532,7 +2532,7 @@ this. If this flag is not specified, then some hypervisors may fail after partially performing the action, and B<dumpxml> must be used to see whether any partial changes occurred. -=item B<snapshot-current> I<domain> {[I<--name>] | [I<--security-info>] +=item B<snapshot-current> I<domain-id> {[I<--name>] | [I<--security-info>] | [I<snapshotname>]} Without I<snapshotname>, this will output the snapshot XML for the domain's @@ -2544,7 +2544,7 @@ the XML. With I<snapshotname>, this is a request to make the existing named snapshot become the current snapshot, without reverting the domain. -=item B<snapshot-edit> I<domain> [I<snapshotname>] [I<--current>] +=item B<snapshot-edit> I<domain-id> [I<snapshotname>] [I<--current>] {[I<--rename>] | [I<--clone>]} Edit the XML configuration file for I<snapshotname> of a domain. If @@ -2572,12 +2572,12 @@ a snapshot name must be done with care, since the contents of some snapshots, such as internal snapshots within a single qcow2 file, are accessible only from the original name. -=item B<snapshot-info> I<domain> {I<snapshot> | I<--current>} +=item B<snapshot-info> I<domain-id> {I<snapshot> | I<--current>} Output basic information about a named <snapshot>, or the current snapshot with I<--current>. -=item B<snapshot-list> I<domain> [{I<--parent> | I<--roots> | I<--tree>}] +=item B<snapshot-list> I<domain-id> [{I<--parent> | I<--roots> | I<--tree>}] [{[I<--from>] B<snapshot> | I<--current>} [I<--descendants>]] [I<--metadata>] [I<--no-metadata>] [I<--leaves>] [I<--no-leaves>] @@ -2613,18 +2613,18 @@ a transient domain. Likewise, if I<--no-metadata> is specified, the list will be filtered to just snapshots that exist without the need for libvirt metadata. -=item B<snapshot-dumpxml> I<domain> I<snapshot> [I<--security-info>] +=item B<snapshot-dumpxml> I<domain-id> I<snapshot> [I<--security-info>] Output the snapshot XML for the domain's snapshot named I<snapshot>. Using I<--security-info> will also include security sensitive information. Use B<snapshot-current> to easily access the XML of the current snapshot. -=item B<snapshot-parent> I<domain> {I<snapshot> | I<--current>} +=item B<snapshot-parent> I<domain-id> {I<snapshot> | I<--current>} Output the name of the parent snapshot, if any, for the given I<snapshot>, or for the current snapshot with I<--current>. -=item B<snapshot-revert> I<domain> {I<snapshot> | I<--current>} +=item B<snapshot-revert> I<domain-id> {I<snapshot> | I<--current>} [{I<--running> | I<--paused>}] [I<--force>] Revert the given domain to the snapshot specified by I<snapshot>, or to @@ -2658,7 +2658,7 @@ snapshot that uses a provably incompatible configuration, as well as with an inactive snapshot that is combined with the I<--start> or I<--pause> flag. -=item B<snapshot-delete> I<domain> {I<snapshot> | I<--current>} [I<--metadata>] +=item B<snapshot-delete> I<domain-id> {I<snapshot> | I<--current>} [I<--metadata>] [{I<--children> | I<--children-only>}] Delete the snapshot for the domain named I<snapshot>, or the current @@ -2761,9 +2761,9 @@ attaching to an externally launched QEMU process. There may be issues with the guest ABI changing upon migration, and hotunplug may not work. -=item B<qemu-monitor-command> I<domain> [I<--hmp>] I<command>... +=item B<qemu-monitor-command> I<domain-id> [I<--hmp>] I<command>... -Send an arbitrary monitor command I<command> to domain I<domain> through the +Send an arbitrary monitor command I<command> to domain I<domain-id> through the qemu monitor. The results of the command will be printed on stdout. If I<--hmp> is passed, the command is considered to be a human monitor command and libvirt will automatically convert it into QMP if needed. In that case -- 1.7.8.6