10:27 p.m.
These patches delete the caching of pci, virtioSerial and ccw address sets.
I am deleting them, because they can be recalculated from the domain definition,
and there's no point in keeping redundant data, especially because handling
a persistent cache of addresses required using functions that released addresses.
These functions aren't useful anymore, so they are dropped too.
Tomasz Flendrich (10):
add virDomainVirtioSerialAddrSetCreateFromDomain
qemu_hotplug: generate vioserial address list on demand
qemu: remove vioserialaddrs caching
Add qemuDomainCCWAddrSetCreateFromDomain
qemu_hotplug: generate ccw address list on demand
qemu: remove ccwaddrs caching
add qemuDomainPCIAddrSetCreateFromDomain
qemu_hotplug: generate pci address list on demand
qemu: remove pciaddrs caching
Remove unused functions that release addresses
src/conf/domain_addr.c | 123 ++++++++-----------------------
src/conf/domain_addr.h | 15 +---
src/libvirt_private.syms | 4 +-
src/qemu/qemu_domain.c | 3 -
src/qemu/qemu_domain.h | 4 --
src/qemu/qemu_domain_address.c | 160 ++++++++++++++++++-----------------------
src/qemu/qemu_domain_address.h | 11 ++-
src/qemu/qemu_hotplug.c | 153 ++++++++++++++++++++++-----------------
8 files changed, 200 insertions(+), 273 deletions(-)
--
2.7.4 (Apple Git-66)
10:27 p.m.
New subject: [libvirt] [PATCH 01/10] add virDomainVirtioSerialAddrSetCreateFromDomain
The address sets (pci, ccw, virtio serial) are currently cached
in qemu private data, but all the information required to recreate
these sets is in the domain definition. Therefore I am removing
the redundant data and adding a way to recalculate these sets.
Add a function that calculates the virtio serial address set
from the domain definition.
Credit goes to Cole Robinson.
---
src/conf/domain_addr.c | 31 +++++++++++++++++++++++++++++++
src/conf/domain_addr.h | 3 +++
src/libvirt_private.syms | 1 +
src/qemu/qemu_domain_address.c | 9 +--------
4 files changed, 36 insertions(+), 8 deletions(-)
diff --git a/src/conf/domain_addr.c b/src/conf/domain_addr.c
index 794270d..fc3b9be 100644
--- a/src/conf/domain_addr.c
+++ b/src/conf/domain_addr.c
@@ -975,6 +975,37 @@ virDomainVirtioSerialAddrSetFree(virDomainVirtioSerialAddrSetPtr
addrs)
}
}
+
+/* virDomainVirtioSerialAddrSetCreateFromDomain
++ *
++ * @def: Domain def to introspect
++ *
++ * Inspect the domain definition and return an address set containing
++ * every virtio serial address we find
++ */
+virDomainVirtioSerialAddrSetPtr
+virDomainVirtioSerialAddrSetCreateFromDomain(virDomainDefPtr def)
+{
+ virDomainVirtioSerialAddrSetPtr addrs;
+ virDomainVirtioSerialAddrSetPtr ret = NULL;
+
+ if (!(addrs = virDomainVirtioSerialAddrSetCreate()))
+ goto cleanup;
+
+ if (virDomainVirtioSerialAddrSetAddControllers(addrs, def) < 0)
+ goto cleanup;
+
+ if (virDomainDeviceInfoIterate(def, virDomainVirtioSerialAddrReserve,
+ addrs) < 0)
+ goto cleanup;
+
+ ret = addrs;
+ cleanup:
+ if (!ret)
+ virDomainVirtioSerialAddrSetFree(addrs);
+ return ret;
+}
+
static int
virDomainVirtioSerialAddrSetAutoaddController(virDomainDefPtr def,
virDomainVirtioSerialAddrSetPtr addrs,
diff --git a/src/conf/domain_addr.h b/src/conf/domain_addr.h
index f3eda89..73d7474 100644
--- a/src/conf/domain_addr.h
+++ b/src/conf/domain_addr.h
@@ -208,6 +208,9 @@
virDomainVirtioSerialAddrSetAddControllers(virDomainVirtioSerialAddrSetPtr addrs
ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2);
void
virDomainVirtioSerialAddrSetFree(virDomainVirtioSerialAddrSetPtr addrs);
+virDomainVirtioSerialAddrSetPtr
+virDomainVirtioSerialAddrSetCreateFromDomain(virDomainDefPtr def)
+ ATTRIBUTE_NONNULL(1);
bool
virDomainVirtioSerialAddrIsComplete(virDomainDeviceInfoPtr info);
int
diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms
index ba718b8..f0a904c 100644
--- a/src/libvirt_private.syms
+++ b/src/libvirt_private.syms
@@ -114,6 +114,7 @@ virDomainVirtioSerialAddrRelease;
virDomainVirtioSerialAddrReserve;
virDomainVirtioSerialAddrSetAddControllers;
virDomainVirtioSerialAddrSetCreate;
+virDomainVirtioSerialAddrSetCreateFromDomain;
virDomainVirtioSerialAddrSetFree;
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index ee44d45..3033ab9 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -114,14 +114,7 @@ qemuDomainAssignVirtioSerialAddresses(virDomainDefPtr def,
virDomainVirtioSerialAddrSetPtr addrs = NULL;
qemuDomainObjPrivatePtr priv = NULL;
- if (!(addrs = virDomainVirtioSerialAddrSetCreate()))
- goto cleanup;
-
- if (virDomainVirtioSerialAddrSetAddControllers(addrs, def) < 0)
- goto cleanup;
-
- if (virDomainDeviceInfoIterate(def, virDomainVirtioSerialAddrReserve,
- addrs) < 0)
+ if (!(addrs = virDomainVirtioSerialAddrSetCreateFromDomain(def)))
goto cleanup;
VIR_DEBUG("Finished reserving existing ports");
--
2.7.4 (Apple Git-66)
10:27 p.m.
New subject: [libvirt] [PATCH 02/10] qemu_hotplug: generate vioserial address list on demand
Dropping the caching of virtio serial address set.
Instead of using the cached address set, a function in qemu_hotplug.c
now recalculates it on demand.
Credit goes to Cole Robinson.
---
src/qemu/qemu_hotplug.c | 38 ++++++++++++++++++++++++++------------
1 file changed, 26 insertions(+), 12 deletions(-)
diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c
index 04e11b4..5101ae1 100644
--- a/src/qemu/qemu_hotplug.c
+++ b/src/qemu/qemu_hotplug.c
@@ -1470,38 +1470,52 @@ qemuDomainChrRemove(virDomainDefPtr vmdef,
}
static int
-qemuDomainAttachChrDeviceAssignAddr(qemuDomainObjPrivatePtr priv,
+qemuDomainAttachChrDeviceAssignAddr(virDomainDefPtr def,
+ qemuDomainObjPrivatePtr priv,
virDomainChrDefPtr chr)
{
+ int ret = -1;
+ virDomainVirtioSerialAddrSetPtr vioaddrs = NULL;
+
+ if (!(vioaddrs = virDomainVirtioSerialAddrSetCreateFromDomain(def)))
+ goto cleanup;
+
if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE &&
chr->targetType == VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_VIRTIO) {
- if (virDomainVirtioSerialAddrAutoAssign(NULL, priv->vioserialaddrs,
+ if (virDomainVirtioSerialAddrAutoAssign(NULL, vioaddrs,
&chr->info, true) < 0)
- return -1;
- return 1;
+ goto cleanup;
+ ret = 1;
} else if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL &&
chr->targetType == VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_PCI) {
if (virDomainPCIAddressEnsureAddr(priv->pciaddrs, &chr->info) < 0)
- return -1;
- return 1;
+ goto cleanup;
+ ret = 1;
} else if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_CHANNEL &&
chr->targetType == VIR_DOMAIN_CHR_CHANNEL_TARGET_TYPE_VIRTIO) {
- if (virDomainVirtioSerialAddrAutoAssign(NULL, priv->vioserialaddrs,
+ if (virDomainVirtioSerialAddrAutoAssign(NULL, vioaddrs,
&chr->info, false) < 0)
- return -1;
- return 1;
+ goto cleanup;
+ ret = 1;
}
+ if (ret == 1)
+ goto cleanup;
+
if (chr->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_SERIAL ||
chr->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("Unsupported address type for character device"));
- return -1;
+ goto cleanup;
}
- return 0;
+ ret = 0;
+
+ cleanup:
+ virDomainVirtioSerialAddrSetFree(vioaddrs);
+ return ret;
}
int qemuDomainAttachChrDevice(virQEMUDriverPtr driver,
@@ -1522,7 +1536,7 @@ int qemuDomainAttachChrDevice(virQEMUDriverPtr driver,
if (qemuAssignDeviceChrAlias(vmdef, chr, -1) < 0)
goto cleanup;
- if ((rc = qemuDomainAttachChrDeviceAssignAddr(priv, chr)) < 0)
+ if ((rc = qemuDomainAttachChrDeviceAssignAddr(vm->def, priv, chr)) < 0)
goto cleanup;
if (rc == 1)
need_release = true;
--
2.7.4 (Apple Git-66)
10:27 p.m.
New subject: [libvirt] [PATCH 03/10] qemu: remove vioserialaddrs caching
Dropping the caching of virtio serial address set.
The cached set is not required anymore, because the set is now being
recalculated from the domain definition on demand, so the cache
can be deleted.
Credit goes to Cole Robinson.
---
src/qemu/qemu_domain.c | 1 -
src/qemu/qemu_domain.h | 1 -
src/qemu/qemu_domain_address.c | 17 ++---------------
3 files changed, 2 insertions(+), 17 deletions(-)
diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c
index 286f096..543f21a 100644
--- a/src/qemu/qemu_domain.c
+++ b/src/qemu/qemu_domain.c
@@ -1300,7 +1300,6 @@ qemuDomainObjPrivateFree(void *data)
virCgroupFree(&priv->cgroup);
virDomainPCIAddressSetFree(priv->pciaddrs);
virDomainCCWAddressSetFree(priv->ccwaddrs);
- virDomainVirtioSerialAddrSetFree(priv->vioserialaddrs);
virDomainChrSourceDefFree(priv->monConfig);
qemuDomainObjFreeJob(priv);
VIR_FREE(priv->lockState);
diff --git a/src/qemu/qemu_domain.h b/src/qemu/qemu_domain.h
index 114db98..cbdbdfc 100644
--- a/src/qemu/qemu_domain.h
+++ b/src/qemu/qemu_domain.h
@@ -186,7 +186,6 @@ struct _qemuDomainObjPrivate {
virDomainPCIAddressSetPtr pciaddrs;
virDomainCCWAddressSetPtr ccwaddrs;
- virDomainVirtioSerialAddrSetPtr vioserialaddrs;
virQEMUCapsPtr qemuCaps;
char *lockState;
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index 3033ab9..ec8ce40 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -106,13 +106,11 @@ qemuDomainSetSCSIControllerModel(const virDomainDef *def,
static int
-qemuDomainAssignVirtioSerialAddresses(virDomainDefPtr def,
- virDomainObjPtr obj)
+qemuDomainAssignVirtioSerialAddresses(virDomainDefPtr def)
{
int ret = -1;
size_t i;
virDomainVirtioSerialAddrSetPtr addrs = NULL;
- qemuDomainObjPrivatePtr priv = NULL;
if (!(addrs = virDomainVirtioSerialAddrSetCreateFromDomain(def)))
goto cleanup;
@@ -137,13 +135,6 @@ qemuDomainAssignVirtioSerialAddresses(virDomainDefPtr def,
goto cleanup;
}
- if (obj && obj->privateData) {
- priv = obj->privateData;
- /* if this is the live domain object, we persist the addresses */
- virDomainVirtioSerialAddrSetFree(priv->vioserialaddrs);
- priv->vioserialaddrs = addrs;
- addrs = NULL;
- }
ret = 0;
cleanup:
@@ -1621,7 +1612,7 @@ qemuDomainAssignAddresses(virDomainDefPtr def,
virDomainObjPtr obj,
bool newDomain ATTRIBUTE_UNUSED)
{
- if (qemuDomainAssignVirtioSerialAddresses(def, obj) < 0)
+ if (qemuDomainAssignVirtioSerialAddresses(def) < 0)
return -1;
if (qemuDomainAssignSpaprVIOAddresses(def, qemuCaps) < 0)
@@ -1660,8 +1651,4 @@ qemuDomainReleaseDeviceAddress(virDomainObjPtr vm,
&info->addr.pci) < 0)
VIR_WARN("Unable to release PCI address on %s",
NULLSTR(devstr));
- if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_SERIAL &&
- virDomainVirtioSerialAddrRelease(priv->vioserialaddrs, info) < 0)
- VIR_WARN("Unable to release virtio-serial address on %s",
- NULLSTR(devstr));
}
--
2.7.4 (Apple Git-66)
10:27 p.m.
New subject: [libvirt] [PATCH 04/10] Add qemuDomainCCWAddrSetCreateFromDomain
The address sets (pci, ccw, virtio serial) are currently cached
in qemu private data, but all the information required to recreate
these sets is in the domain definition. Therefore I am removing
the redundant data and adding a way to recalculate these sets.
Add a function that calculates the ccw address set
from the domain definition.
---
src/qemu/qemu_domain_address.c | 31 +++++++++++++++++++++++--------
src/qemu/qemu_domain_address.h | 4 ++++
2 files changed, 27 insertions(+), 8 deletions(-)
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index ec8ce40..5cc6d29 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -320,6 +320,28 @@ qemuDomainPrimeVirtioDeviceAddresses(virDomainDefPtr def,
}
}
+virDomainCCWAddressSetPtr
+qemuDomainCCWAddrSetCreateFromDomain(virDomainDefPtr def)
+{
+ virDomainCCWAddressSetPtr addrs = NULL;
+
+ if (!(addrs = virDomainCCWAddressSetCreate()))
+ goto error;
+
+ if (virDomainDeviceInfoIterate(def, virDomainCCWAddressValidate,
+ addrs) < 0)
+ goto error;
+
+ if (virDomainDeviceInfoIterate(def, virDomainCCWAddressAllocate,
+ addrs) < 0)
+ goto error;
+
+ return addrs;
+
+ error:
+ virDomainCCWAddressSetFree(addrs);
+ return NULL;
+}
/*
* Three steps populating CCW devnos
@@ -341,16 +363,9 @@ qemuDomainAssignS390Addresses(virDomainDefPtr def,
qemuDomainPrimeVirtioDeviceAddresses(
def, VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW);
- if (!(addrs = virDomainCCWAddressSetCreate()))
- goto cleanup;
-
- if (virDomainDeviceInfoIterate(def, virDomainCCWAddressValidate,
- addrs) < 0)
+ if (!(addrs = qemuDomainCCWAddrSetCreateFromDomain(def)))
goto cleanup;
- if (virDomainDeviceInfoIterate(def, virDomainCCWAddressAllocate,
- addrs) < 0)
- goto cleanup;
} else if (virQEMUCapsGet(qemuCaps, QEMU_CAPS_VIRTIO_S390)) {
/* deal with legacy virtio-s390 */
qemuDomainPrimeVirtioDeviceAddresses(
diff --git a/src/qemu/qemu_domain_address.h b/src/qemu/qemu_domain_address.h
index ee326d7..11d6e92 100644
--- a/src/qemu/qemu_domain_address.h
+++ b/src/qemu/qemu_domain_address.h
@@ -41,6 +41,10 @@ void qemuDomainReleaseDeviceAddress(virDomainObjPtr vm,
virDomainDeviceInfoPtr info,
const char *devstr);
+virDomainCCWAddressSetPtr
+qemuDomainCCWAddrSetCreateFromDomain(virDomainDefPtr def)
+ ATTRIBUTE_NONNULL(1);
+
# define __QEMU_DOMAIN_ADDRESS_H__
#endif /* __QEMU_DOMAIN_ADDRESS_H__ */
--
2.7.4 (Apple Git-66)
10:27 p.m.
New subject: [libvirt] [PATCH 05/10] qemu_hotplug: generate ccw address list on demand
Dropping the caching of ccw address set.
Instead of using the cached address set, functions in qemu_hotplug.c
now recalculate it on demand.
---
src/qemu/qemu_hotplug.c | 26 +++++++++++++++++++++-----
1 file changed, 21 insertions(+), 5 deletions(-)
diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c
index 5101ae1..ee77e15 100644
--- a/src/qemu/qemu_hotplug.c
+++ b/src/qemu/qemu_hotplug.c
@@ -308,6 +308,7 @@ qemuDomainAttachVirtioDiskDevice(virConnectPtr conn,
char *drivestr = NULL;
char *drivealias = NULL;
bool releaseaddr = false;
+ virDomainCCWAddressSetPtr ccwaddrs = NULL;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
const char *src = virDomainDiskGetSource(disk);
@@ -327,7 +328,9 @@ qemuDomainAttachVirtioDiskDevice(virConnectPtr conn,
goto cleanup;
if (disk->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW) {
- if (virDomainCCWAddressAssign(&disk->info, priv->ccwaddrs,
+ if (!(ccwaddrs = qemuDomainCCWAddrSetCreateFromDomain(vm->def)))
+ goto error;
+ if (virDomainCCWAddressAssign(&disk->info, ccwaddrs,
!disk->info.addr.ccw.assigned) < 0)
goto error;
} else if (!disk->info.type ||
@@ -375,6 +378,7 @@ qemuDomainAttachVirtioDiskDevice(virConnectPtr conn,
cleanup:
qemuDomainSecretDiskDestroy(disk);
+ virDomainCCWAddressSetFree(ccwaddrs);
VIR_FREE(devstr);
VIR_FREE(drivestr);
VIR_FREE(drivealias);
@@ -416,6 +420,7 @@ int qemuDomainAttachControllerDevice(virQEMUDriverPtr driver,
const char* type = virDomainControllerTypeToString(controller->type);
char *devstr = NULL;
qemuDomainObjPrivatePtr priv = vm->privateData;
+ virDomainCCWAddressSetPtr ccwaddrs = NULL;
bool releaseaddr = false;
if (controller->type != VIR_DOMAIN_CONTROLLER_TYPE_SCSI) {
@@ -457,7 +462,9 @@ int qemuDomainAttachControllerDevice(virQEMUDriverPtr driver,
if (virDomainPCIAddressEnsureAddr(priv->pciaddrs, &controller->info)
< 0)
goto cleanup;
} else if (controller->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW) {
- if (virDomainCCWAddressAssign(&controller->info, priv->ccwaddrs,
+ if (!(ccwaddrs = qemuDomainCCWAddrSetCreateFromDomain(vm->def)))
+ goto cleanup;
+ if (virDomainCCWAddressAssign(&controller->info, ccwaddrs,
!controller->info.addr.ccw.assigned) < 0)
goto cleanup;
}
@@ -490,6 +497,7 @@ int qemuDomainAttachControllerDevice(virQEMUDriverPtr driver,
qemuDomainReleaseDeviceAddress(vm, &controller->info, NULL);
VIR_FREE(devstr);
+ virDomainCCWAddressSetFree(ccwaddrs);
return ret;
}
@@ -820,6 +828,7 @@ qemuDomainAttachNetDevice(virQEMUDriverPtr driver,
int actualType;
virNetDevBandwidthPtr actualBandwidth;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
+ virDomainCCWAddressSetPtr ccwaddrs = NULL;
size_t i;
/* preallocate new slot for device */
@@ -957,7 +966,9 @@ qemuDomainAttachNetDevice(virQEMUDriverPtr driver,
if (qemuDomainMachineIsS390CCW(vm->def) &&
virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_VIRTIO_CCW)) {
net->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW;
- if (virDomainCCWAddressAssign(&net->info, priv->ccwaddrs,
+ if (!(ccwaddrs = qemuDomainCCWAddrSetCreateFromDomain(vm->def)))
+ goto cleanup;
+ if (virDomainCCWAddressAssign(&net->info, ccwaddrs,
!net->info.addr.ccw.assigned) < 0)
goto cleanup;
} else if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_VIRTIO_S390)) {
@@ -1131,6 +1142,7 @@ qemuDomainAttachNetDevice(virQEMUDriverPtr driver,
VIR_FREE(vhostfd);
VIR_FREE(vhostfdName);
virObjectUnref(cfg);
+ virDomainCCWAddressSetFree(ccwaddrs);
return ret;
@@ -1592,6 +1604,7 @@ qemuDomainAttachRNGDevice(virQEMUDriverPtr driver,
char *charAlias = NULL;
char *objAlias = NULL;
virJSONValuePtr props = NULL;
+ virDomainCCWAddressSetPtr ccwaddrs = NULL;
const char *type;
int ret = -1;
@@ -1620,9 +1633,11 @@ qemuDomainAttachRNGDevice(virQEMUDriverPtr driver,
if (virDomainPCIAddressEnsureAddr(priv->pciaddrs, &rng->info) < 0)
return -1;
} else if (rng->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW) {
- if (virDomainCCWAddressAssign(&rng->info, priv->ccwaddrs,
+ if (!(ccwaddrs = qemuDomainCCWAddrSetCreateFromDomain(vm->def)))
+ goto cleanup;
+ if (virDomainCCWAddressAssign(&rng->info, ccwaddrs,
!rng->info.addr.ccw.assigned) < 0)
- return -1;
+ goto cleanup;
}
/* build required metadata */
@@ -1671,6 +1686,7 @@ qemuDomainAttachRNGDevice(virQEMUDriverPtr driver,
VIR_FREE(charAlias);
VIR_FREE(objAlias);
VIR_FREE(devstr);
+ virDomainCCWAddressSetFree(ccwaddrs);
return ret;
/* rollback */
--
2.7.4 (Apple Git-66)
10:27 p.m.
New subject: [libvirt] [PATCH 06/10] qemu: remove ccwaddrs caching
Dropping the caching of ccw address set.
The cached set is not required anymore, because the set is now being
recalculated from the domain definition on demand, so the cache
can be deleted.
---
src/qemu/qemu_domain.c | 1 -
src/qemu/qemu_domain.h | 1 -
src/qemu/qemu_domain_address.c | 21 ++-------------------
3 files changed, 2 insertions(+), 21 deletions(-)
diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c
index 543f21a..5054ffe 100644
--- a/src/qemu/qemu_domain.c
+++ b/src/qemu/qemu_domain.c
@@ -1299,7 +1299,6 @@ qemuDomainObjPrivateFree(void *data)
virCgroupFree(&priv->cgroup);
virDomainPCIAddressSetFree(priv->pciaddrs);
- virDomainCCWAddressSetFree(priv->ccwaddrs);
virDomainChrSourceDefFree(priv->monConfig);
qemuDomainObjFreeJob(priv);
VIR_FREE(priv->lockState);
diff --git a/src/qemu/qemu_domain.h b/src/qemu/qemu_domain.h
index cbdbdfc..fdabbf9 100644
--- a/src/qemu/qemu_domain.h
+++ b/src/qemu/qemu_domain.h
@@ -185,7 +185,6 @@ struct _qemuDomainObjPrivate {
char *pidfile;
virDomainPCIAddressSetPtr pciaddrs;
- virDomainCCWAddressSetPtr ccwaddrs;
virQEMUCapsPtr qemuCaps;
char *lockState;
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index 5cc6d29..8434124 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -351,12 +351,10 @@ qemuDomainCCWAddrSetCreateFromDomain(virDomainDefPtr def)
*/
static int
qemuDomainAssignS390Addresses(virDomainDefPtr def,
- virQEMUCapsPtr qemuCaps,
- virDomainObjPtr obj)
+ virQEMUCapsPtr qemuCaps)
{
int ret = -1;
virDomainCCWAddressSetPtr addrs = NULL;
- qemuDomainObjPrivatePtr priv = NULL;
if (qemuDomainMachineIsS390CCW(def) &&
virQEMUCapsGet(qemuCaps, QEMU_CAPS_VIRTIO_CCW)) {
@@ -372,15 +370,6 @@ qemuDomainAssignS390Addresses(virDomainDefPtr def,
def, VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_S390);
}
- if (obj && obj->privateData) {
- priv = obj->privateData;
- if (addrs) {
- /* if this is the live domain object, we persist the CCW addresses*/
- virDomainCCWAddressSetFree(priv->ccwaddrs);
- priv->ccwaddrs = addrs;
- addrs = NULL;
- }
- }
ret = 0;
cleanup:
@@ -1633,7 +1622,7 @@ qemuDomainAssignAddresses(virDomainDefPtr def,
if (qemuDomainAssignSpaprVIOAddresses(def, qemuCaps) < 0)
return -1;
- if (qemuDomainAssignS390Addresses(def, qemuCaps, obj) < 0)
+ if (qemuDomainAssignS390Addresses(def, qemuCaps) < 0)
return -1;
qemuDomainAssignARMVirtioMMIOAddresses(def, qemuCaps);
@@ -1655,12 +1644,6 @@ qemuDomainReleaseDeviceAddress(virDomainObjPtr vm,
if (!devstr)
devstr = info->alias;
- if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW &&
- qemuDomainMachineIsS390CCW(vm->def) &&
- virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_VIRTIO_CCW) &&
- virDomainCCWAddressReleaseAddr(priv->ccwaddrs, info) < 0)
- VIR_WARN("Unable to release CCW address on %s",
- NULLSTR(devstr));
else if (virDeviceInfoPCIAddressPresent(info) &&
virDomainPCIAddressReleaseSlot(priv->pciaddrs,
&info->addr.pci) < 0)
--
2.7.4 (Apple Git-66)
10:27 p.m.
New subject: [libvirt] [PATCH 07/10] add qemuDomainPCIAddrSetCreateFromDomain
The address sets (pci, ccw, virtio serial) are currently cached
in qemu private data, but all the information required to recreate
these sets is in the domain definition. Therefore I am removing
the redundant data and adding a way to recalculate these sets.
Add a function that calculates the pci address set from
the domain definition.
The part of pci address assignment that is not a dryRun is
separated from qemuDomainAssignPCIAddresses into a new function:
qemuDomainPCIAddrSetCreateFromDomain. The first time this function
is run, it can allocate some new addresses. After all the pci
addresses are assigned, on subsequent runs to this function, it just
recreates the pci address set.
---
src/qemu/qemu_domain_address.c | 48 +++++++++++++++++++++++++++++++++++-------
src/qemu/qemu_domain_address.h | 5 +++++
2 files changed, 45 insertions(+), 8 deletions(-)
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index 8434124..a534df0 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -1424,6 +1424,45 @@ qemuDomainAddressFindNewBusNr(virDomainDefPtr def)
return lowestBusNr - 2;
}
+virDomainPCIAddressSetPtr
+qemuDomainPCIAddrSetCreateFromDomain(virDomainDefPtr def,
+ virQEMUCapsPtr qemuCaps)
+{
+ virDomainPCIAddressSetPtr addrs = NULL;
+ int max_idx = -1;
+ int nbuses = 0;
+ virDomainPCIAddressSetPtr ret = NULL;
+ size_t i;
+
+ for (i = 0; i < def->ncontrollers; i++) {
+ if (def->controllers[i]->type == VIR_DOMAIN_CONTROLLER_TYPE_PCI) {
+ if ((int) def->controllers[i]->idx > max_idx)
+ max_idx = def->controllers[i]->idx;
+ }
+ }
+
+ nbuses = max_idx + 1;
+
+ if (!(addrs = qemuDomainPCIAddressSetCreate(def, nbuses, false)))
+ goto cleanup;
+
+ if (qemuDomainSupportsPCI(def, qemuCaps)) {
+ if (qemuDomainValidateDevicePCISlotsChipsets(def, qemuCaps,
+ addrs) < 0)
+ goto cleanup;
+
+ if (qemuDomainAssignDevicePCISlots(def, qemuCaps, addrs) < 0)
+ goto cleanup;
+ }
+
+ ret = addrs;
+ addrs = NULL;
+
+ cleanup:
+ virDomainPCIAddressSetFree(addrs);
+
+ return ret;
+}
static int
qemuDomainAssignPCIAddresses(virDomainDefPtr def,
@@ -1506,17 +1545,10 @@ qemuDomainAssignPCIAddresses(virDomainDefPtr def,
goto cleanup;
}
- if (!(addrs = qemuDomainPCIAddressSetCreate(def, nbuses, false)))
+ if (!(addrs = qemuDomainPCIAddrSetCreateFromDomain(def, qemuCaps)))
goto cleanup;
if (qemuDomainSupportsPCI(def, qemuCaps)) {
- if (qemuDomainValidateDevicePCISlotsChipsets(def, qemuCaps,
- addrs) < 0)
- goto cleanup;
-
- if (qemuDomainAssignDevicePCISlots(def, qemuCaps, addrs) < 0)
- goto cleanup;
-
for (i = 0; i < def->ncontrollers; i++) {
virDomainControllerDefPtr cont = def->controllers[i];
int idx = cont->idx;
diff --git a/src/qemu/qemu_domain_address.h b/src/qemu/qemu_domain_address.h
index 11d6e92..546c57f 100644
--- a/src/qemu/qemu_domain_address.h
+++ b/src/qemu/qemu_domain_address.h
@@ -45,6 +45,11 @@ virDomainCCWAddressSetPtr
qemuDomainCCWAddrSetCreateFromDomain(virDomainDefPtr def)
ATTRIBUTE_NONNULL(1);
+virDomainPCIAddressSetPtr
+qemuDomainPCIAddrSetCreateFromDomain(virDomainDefPtr def,
+ virQEMUCapsPtr qemuCaps)
+ ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2);
+
# define __QEMU_DOMAIN_ADDRESS_H__
#endif /* __QEMU_DOMAIN_ADDRESS_H__ */
--
2.7.4 (Apple Git-66)
10:27 p.m.
New subject: [libvirt] [PATCH 08/10] qemu_hotplug: generate pci address list on demand
Dropping the caching of pci address set.
Instead of using the cached address set, functions in qemu_hotplug.c
now recalculate it on demand.
---
src/qemu/qemu_domain_address.c | 18 ---------
src/qemu/qemu_domain_address.h | 4 --
src/qemu/qemu_hotplug.c | 89 ++++++++++++++++++------------------------
3 files changed, 39 insertions(+), 72 deletions(-)
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index a534df0..a5add50 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -1664,21 +1664,3 @@ qemuDomainAssignAddresses(virDomainDefPtr def,
return 0;
}
-
-
-void
-qemuDomainReleaseDeviceAddress(virDomainObjPtr vm,
- virDomainDeviceInfoPtr info,
- const char *devstr)
-{
- qemuDomainObjPrivatePtr priv = vm->privateData;
-
- if (!devstr)
- devstr = info->alias;
-
- else if (virDeviceInfoPCIAddressPresent(info) &&
- virDomainPCIAddressReleaseSlot(priv->pciaddrs,
- &info->addr.pci) < 0)
- VIR_WARN("Unable to release PCI address on %s",
- NULLSTR(devstr));
-}
diff --git a/src/qemu/qemu_domain_address.h b/src/qemu/qemu_domain_address.h
index 546c57f..5f35a92 100644
--- a/src/qemu/qemu_domain_address.h
+++ b/src/qemu/qemu_domain_address.h
@@ -37,10 +37,6 @@ int qemuDomainAssignAddresses(virDomainDefPtr def,
bool newDomain)
ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2);
-void qemuDomainReleaseDeviceAddress(virDomainObjPtr vm,
- virDomainDeviceInfoPtr info,
- const char *devstr);
-
virDomainCCWAddressSetPtr
qemuDomainCCWAddrSetCreateFromDomain(virDomainDefPtr def)
ATTRIBUTE_NONNULL(1);
diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c
index ee77e15..a6404d8 100644
--- a/src/qemu/qemu_hotplug.c
+++ b/src/qemu/qemu_hotplug.c
@@ -307,10 +307,9 @@ qemuDomainAttachVirtioDiskDevice(virConnectPtr conn,
char *devstr = NULL;
char *drivestr = NULL;
char *drivealias = NULL;
- bool releaseaddr = false;
virDomainCCWAddressSetPtr ccwaddrs = NULL;
+ virDomainPCIAddressSetPtr pciaddrs = NULL;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
- const char *src = virDomainDiskGetSource(disk);
if (!disk->info.type) {
if (qemuDomainMachineIsS390CCW(vm->def) &&
@@ -335,10 +334,13 @@ qemuDomainAttachVirtioDiskDevice(virConnectPtr conn,
goto error;
} else if (!disk->info.type ||
disk->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
- if (virDomainPCIAddressEnsureAddr(priv->pciaddrs, &disk->info) < 0)
+ if (!(pciaddrs = qemuDomainPCIAddrSetCreateFromDomain(vm->def,
+ priv->qemuCaps)))
+ goto error;
+ if (virDomainPCIAddressEnsureAddr(pciaddrs, &disk->info) < 0)
goto error;
}
- releaseaddr = true;
+
if (qemuAssignDeviceDiskAlias(vm->def, disk, priv->qemuCaps) < 0)
goto error;
@@ -366,10 +368,8 @@ qemuDomainAttachVirtioDiskDevice(virConnectPtr conn,
if (qemuMonitorAddDevice(priv->mon, devstr) < 0)
goto failadddevice;
- if (qemuDomainObjExitMonitor(driver, vm) < 0) {
- releaseaddr = false;
+ if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto failexitmonitor;
- }
virDomainAuditDisk(vm, NULL, disk->src, "attach", true);
@@ -379,6 +379,7 @@ qemuDomainAttachVirtioDiskDevice(virConnectPtr conn,
cleanup:
qemuDomainSecretDiskDestroy(disk);
virDomainCCWAddressSetFree(ccwaddrs);
+ virDomainPCIAddressSetFree(pciaddrs);
VIR_FREE(devstr);
VIR_FREE(drivestr);
VIR_FREE(drivealias);
@@ -397,16 +398,10 @@ qemuDomainAttachVirtioDiskDevice(virConnectPtr conn,
}
failadddrive:
- if (qemuDomainObjExitMonitor(driver, vm) < 0)
- releaseaddr = false;
-
failexitmonitor:
virDomainAuditDisk(vm, NULL, disk->src, "attach", false);
error:
- if (releaseaddr)
- qemuDomainReleaseDeviceAddress(vm, &disk->info, src);
-
ignore_value(qemuDomainPrepareDisk(driver, vm, disk, NULL, true));
goto cleanup;
}
@@ -421,7 +416,7 @@ int qemuDomainAttachControllerDevice(virQEMUDriverPtr driver,
char *devstr = NULL;
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainCCWAddressSetPtr ccwaddrs = NULL;
- bool releaseaddr = false;
+ virDomainPCIAddressSetPtr pciaddrs = NULL;
if (controller->type != VIR_DOMAIN_CONTROLLER_TYPE_SCSI) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
@@ -459,7 +454,10 @@ int qemuDomainAttachControllerDevice(virQEMUDriverPtr driver,
if (controller->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE ||
controller->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
- if (virDomainPCIAddressEnsureAddr(priv->pciaddrs, &controller->info)
< 0)
+ if (!(pciaddrs = qemuDomainPCIAddrSetCreateFromDomain(vm->def,
+ priv->qemuCaps)))
+ goto cleanup;
+ if (virDomainPCIAddressEnsureAddr(pciaddrs, &controller->info) < 0)
goto cleanup;
} else if (controller->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW) {
if (!(ccwaddrs = qemuDomainCCWAddrSetCreateFromDomain(vm->def)))
@@ -468,7 +466,7 @@ int qemuDomainAttachControllerDevice(virQEMUDriverPtr driver,
!controller->info.addr.ccw.assigned) < 0)
goto cleanup;
}
- releaseaddr = true;
+
if (qemuAssignDeviceControllerAlias(vm->def, priv->qemuCaps, controller) <
0)
goto cleanup;
@@ -481,7 +479,6 @@ int qemuDomainAttachControllerDevice(virQEMUDriverPtr driver,
qemuDomainObjEnterMonitor(driver, vm);
ret = qemuMonitorAddDevice(priv->mon, devstr);
if (qemuDomainObjExitMonitor(driver, vm) < 0) {
- releaseaddr = false;
ret = -1;
goto cleanup;
}
@@ -493,11 +490,10 @@ int qemuDomainAttachControllerDevice(virQEMUDriverPtr driver,
}
cleanup:
- if (ret != 0 && releaseaddr)
- qemuDomainReleaseDeviceAddress(vm, &controller->info, NULL);
VIR_FREE(devstr);
virDomainCCWAddressSetFree(ccwaddrs);
+ virDomainPCIAddressSetFree(pciaddrs);
return ret;
}
@@ -823,12 +819,12 @@ qemuDomainAttachNetDevice(virQEMUDriverPtr driver,
virNetDevVPortProfilePtr vport = NULL;
int ret = -1;
int vlan;
- bool releaseaddr = false;
bool iface_connected = false;
int actualType;
virNetDevBandwidthPtr actualBandwidth;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
virDomainCCWAddressSetPtr ccwaddrs = NULL;
+ virDomainPCIAddressSetPtr pciaddrs = NULL;
size_t i;
/* preallocate new slot for device */
@@ -975,11 +971,14 @@ qemuDomainAttachNetDevice(virQEMUDriverPtr driver,
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("virtio-s390 net device cannot be hotplugged."));
goto cleanup;
- } else if (virDomainPCIAddressEnsureAddr(priv->pciaddrs, &net->info) <
0) {
- goto cleanup;
+ } else {
+ if (!(pciaddrs = qemuDomainPCIAddrSetCreateFromDomain(vm->def,
+ priv->qemuCaps)))
+ goto cleanup;
+ if (virDomainPCIAddressEnsureAddr(pciaddrs, &net->info) < 0)
+ goto cleanup;
}
- releaseaddr = true;
if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_NETDEV)) {
vlan = -1;
@@ -1093,8 +1092,6 @@ qemuDomainAttachNetDevice(virQEMUDriverPtr driver,
if (!ret) {
vm->def->nets[vm->def->nnets++] = net;
} else {
- if (releaseaddr)
- qemuDomainReleaseDeviceAddress(vm, &net->info, NULL);
if (iface_connected) {
virDomainConfNWFilterTeardown(net);
@@ -1189,11 +1186,11 @@ qemuDomainAttachHostPCIDevice(virQEMUDriverPtr driver,
char *devstr = NULL;
int configfd = -1;
char *configfd_name = NULL;
- bool releaseaddr = false;
bool teardowncgroup = false;
bool teardownlabel = false;
int backend;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
+ virDomainPCIAddressSetPtr pciaddrs = NULL;
unsigned int flags = 0;
if (VIR_REALLOC_N(vm->def->hostdevs, vm->def->nhostdevs + 1) < 0)
@@ -1255,9 +1252,10 @@ qemuDomainAttachHostPCIDevice(virQEMUDriverPtr driver,
if (qemuAssignDeviceHostdevAlias(vm->def, &hostdev->info->alias, -1)
< 0)
goto error;
- if (virDomainPCIAddressEnsureAddr(priv->pciaddrs, hostdev->info) < 0)
+ if (!(pciaddrs = qemuDomainPCIAddrSetCreateFromDomain(vm->def,
priv->qemuCaps)))
+ goto cleanup;
+ if (virDomainPCIAddressEnsureAddr(pciaddrs, hostdev->info) < 0)
goto error;
- releaseaddr = true;
if (backend != VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO &&
virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_PCI_CONFIGFD)) {
configfd = qemuOpenPCIConfig(hostdev);
@@ -1294,6 +1292,7 @@ qemuDomainAttachHostPCIDevice(virQEMUDriverPtr driver,
VIR_FREE(configfd_name);
VIR_FORCE_CLOSE(configfd);
virObjectUnref(cfg);
+ virDomainPCIAddressSetFree(pciaddrs);
return 0;
@@ -1305,9 +1304,6 @@ qemuDomainAttachHostPCIDevice(virQEMUDriverPtr driver,
vm->def, hostdev, NULL) < 0)
VIR_WARN("Unable to restore host device labelling on hotplug fail");
- if (releaseaddr)
- qemuDomainReleaseDeviceAddress(vm, hostdev->info, NULL);
-
qemuHostdevReAttachPCIDevices(driver, vm->def->name, &hostdev, 1);
VIR_FREE(devstr);
@@ -1488,6 +1484,7 @@ qemuDomainAttachChrDeviceAssignAddr(virDomainDefPtr def,
{
int ret = -1;
virDomainVirtioSerialAddrSetPtr vioaddrs = NULL;
+ virDomainPCIAddressSetPtr pciaddrs = NULL;
if (!(vioaddrs = virDomainVirtioSerialAddrSetCreateFromDomain(def)))
goto cleanup;
@@ -1501,7 +1498,9 @@ qemuDomainAttachChrDeviceAssignAddr(virDomainDefPtr def,
} else if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL &&
chr->targetType == VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_PCI) {
- if (virDomainPCIAddressEnsureAddr(priv->pciaddrs, &chr->info) < 0)
+ if (!(pciaddrs = qemuDomainPCIAddrSetCreateFromDomain(def, priv->qemuCaps)))
+ goto cleanup;
+ if (virDomainPCIAddressEnsureAddr(pciaddrs, &chr->info) < 0)
goto cleanup;
ret = 1;
@@ -1527,6 +1526,7 @@ qemuDomainAttachChrDeviceAssignAddr(virDomainDefPtr def,
cleanup:
virDomainVirtioSerialAddrSetFree(vioaddrs);
+ virDomainPCIAddressSetFree(pciaddrs);
return ret;
}
@@ -1539,7 +1539,6 @@ int qemuDomainAttachChrDevice(virQEMUDriverPtr driver,
virDomainDefPtr vmdef = vm->def;
char *devstr = NULL;
char *charAlias = NULL;
- bool need_release = false;
if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_CHANNEL &&
qemuDomainPrepareChannel(chr, priv->channelTargetDir) < 0)
@@ -1550,8 +1549,6 @@ int qemuDomainAttachChrDevice(virQEMUDriverPtr driver,
if ((rc = qemuDomainAttachChrDeviceAssignAddr(vm->def, priv, chr)) < 0)
goto cleanup;
- if (rc == 1)
- need_release = true;
if (qemuBuildChrDeviceStr(&devstr, vmdef, chr, priv->qemuCaps) < 0)
goto cleanup;
@@ -1579,8 +1576,6 @@ int qemuDomainAttachChrDevice(virQEMUDriverPtr driver,
cleanup:
if (ret < 0 && virDomainObjIsActive(vm))
qemuDomainChrInsertPreAllocCleanup(vmdef, chr);
- if (ret < 0 && need_release)
- qemuDomainReleaseDeviceAddress(vm, &chr->info, NULL);
VIR_FREE(charAlias);
VIR_FREE(devstr);
return ret;
@@ -1605,6 +1600,7 @@ qemuDomainAttachRNGDevice(virQEMUDriverPtr driver,
char *objAlias = NULL;
virJSONValuePtr props = NULL;
virDomainCCWAddressSetPtr ccwaddrs = NULL;
+ virDomainPCIAddressSetPtr pciaddrs = NULL;
const char *type;
int ret = -1;
@@ -1630,8 +1626,10 @@ qemuDomainAttachRNGDevice(virQEMUDriverPtr driver,
if (rng->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE ||
rng->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
- if (virDomainPCIAddressEnsureAddr(priv->pciaddrs, &rng->info) < 0)
- return -1;
+ if (!(pciaddrs = qemuDomainPCIAddrSetCreateFromDomain(vm->def,
priv->qemuCaps)))
+ goto cleanup;
+ if (virDomainPCIAddressEnsureAddr(pciaddrs, &rng->info) < 0)
+ goto cleanup;
} else if (rng->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW) {
if (!(ccwaddrs = qemuDomainCCWAddrSetCreateFromDomain(vm->def)))
goto cleanup;
@@ -1681,12 +1679,11 @@ qemuDomainAttachRNGDevice(virQEMUDriverPtr driver,
virDomainAuditRNG(vm, NULL, rng, "attach", ret == 0);
cleanup:
virJSONValueFree(props);
- if (ret < 0 && vm)
- qemuDomainReleaseDeviceAddress(vm, &rng->info, NULL);
VIR_FREE(charAlias);
VIR_FREE(objAlias);
VIR_FREE(devstr);
virDomainCCWAddressSetFree(ccwaddrs);
+ virDomainPCIAddressSetFree(pciaddrs);
return ret;
/* rollback */
@@ -2866,8 +2863,6 @@ qemuDomainRemoveDiskDevice(virQEMUDriverPtr driver,
}
}
- qemuDomainReleaseDeviceAddress(vm, &disk->info, src);
-
if (virSecurityManagerRestoreDiskLabel(driver->securityManager,
vm->def, disk) < 0)
VIR_WARN("Unable to restore security label on %s", src);
@@ -2908,7 +2903,6 @@ qemuDomainRemoveControllerDevice(virQEMUDriverPtr driver,
}
}
- qemuDomainReleaseDeviceAddress(vm, &controller->info, NULL);
virDomainControllerDefFree(controller);
return 0;
}
@@ -2968,7 +2962,6 @@ qemuDomainRemovePCIHostDevice(virQEMUDriverPtr driver,
virDomainHostdevDefPtr hostdev)
{
qemuHostdevReAttachPCIDevices(driver, vm->def->name, &hostdev, 1);
- qemuDomainReleaseDeviceAddress(vm, hostdev->info, NULL);
}
static void
@@ -3151,7 +3144,6 @@ qemuDomainRemoveNetDevice(virQEMUDriverPtr driver,
}
}
- qemuDomainReleaseDeviceAddress(vm, &net->info, NULL);
virDomainConfNWFilterTeardown(net);
if (cfg->macFilter && (net->ifname != NULL)) {
@@ -3272,7 +3264,6 @@ qemuDomainRemoveRNGDevice(virQEMUDriverPtr driver,
if ((idx = virDomainRNGFind(vm->def, rng)) >= 0)
virDomainRNGRemove(vm->def, idx);
- qemuDomainReleaseDeviceAddress(vm, &rng->info, NULL);
virDomainRNGDefFree(rng);
ret = 0;
@@ -4128,10 +4119,8 @@ int qemuDomainDetachChrDevice(virQEMUDriverPtr driver,
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
- if ((ret = qemuDomainWaitForDeviceRemoval(vm)) == 1) {
- qemuDomainReleaseDeviceAddress(vm, &tmpChr->info, NULL);
+ if ((ret = qemuDomainWaitForDeviceRemoval(vm)) == 1)
ret = qemuDomainRemoveChrDevice(driver, vm, tmpChr);
- }
cleanup:
qemuDomainResetDeviceRemoval(vm);
--
2.7.4 (Apple Git-66)
10:27 p.m.
New subject: [libvirt] [PATCH 09/10] qemu: remove pciaddrs caching
The cached pci address set is not required anymore, because the set
is now being recalculated from the domain definition on demand,
so the cache can be deleted.
---
src/qemu/qemu_domain.c | 1 -
src/qemu/qemu_domain.h | 2 --
src/qemu/qemu_domain_address.c | 16 +++-------------
3 files changed, 3 insertions(+), 16 deletions(-)
diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c
index 5054ffe..e51584e 100644
--- a/src/qemu/qemu_domain.c
+++ b/src/qemu/qemu_domain.c
@@ -1298,7 +1298,6 @@ qemuDomainObjPrivateFree(void *data)
virObjectUnref(priv->qemuCaps);
virCgroupFree(&priv->cgroup);
- virDomainPCIAddressSetFree(priv->pciaddrs);
virDomainChrSourceDefFree(priv->monConfig);
qemuDomainObjFreeJob(priv);
VIR_FREE(priv->lockState);
diff --git a/src/qemu/qemu_domain.h b/src/qemu/qemu_domain.h
index fdabbf9..bf96ad3 100644
--- a/src/qemu/qemu_domain.h
+++ b/src/qemu/qemu_domain.h
@@ -184,8 +184,6 @@ struct _qemuDomainObjPrivate {
bool beingDestroyed;
char *pidfile;
- virDomainPCIAddressSetPtr pciaddrs;
-
virQEMUCapsPtr qemuCaps;
char *lockState;
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index a5add50..df36349 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -1466,12 +1466,10 @@ qemuDomainPCIAddrSetCreateFromDomain(virDomainDefPtr def,
static int
qemuDomainAssignPCIAddresses(virDomainDefPtr def,
- virQEMUCapsPtr qemuCaps,
- virDomainObjPtr obj)
+ virQEMUCapsPtr qemuCaps)
{
int ret = -1;
virDomainPCIAddressSetPtr addrs = NULL;
- qemuDomainObjPrivatePtr priv = NULL;
int max_idx = -1;
int nbuses = 0;
size_t i;
@@ -1625,14 +1623,6 @@ qemuDomainAssignPCIAddresses(virDomainDefPtr def,
}
}
- if (obj && obj->privateData) {
- priv = obj->privateData;
- /* if this is the live domain object, we persist the PCI addresses */
- virDomainPCIAddressSetFree(priv->pciaddrs);
- priv->pciaddrs = addrs;
- addrs = NULL;
- }
-
ret = 0;
cleanup:
@@ -1645,7 +1635,7 @@ qemuDomainAssignPCIAddresses(virDomainDefPtr def,
int
qemuDomainAssignAddresses(virDomainDefPtr def,
virQEMUCapsPtr qemuCaps,
- virDomainObjPtr obj,
+ virDomainObjPtr obj ATTRIBUTE_UNUSED,
bool newDomain ATTRIBUTE_UNUSED)
{
if (qemuDomainAssignVirtioSerialAddresses(def) < 0)
@@ -1659,7 +1649,7 @@ qemuDomainAssignAddresses(virDomainDefPtr def,
qemuDomainAssignARMVirtioMMIOAddresses(def, qemuCaps);
- if (qemuDomainAssignPCIAddresses(def, qemuCaps, obj) < 0)
+ if (qemuDomainAssignPCIAddresses(def, qemuCaps) < 0)
return -1;
return 0;
--
2.7.4 (Apple Git-66)
10:27 p.m.
New subject: [libvirt] [PATCH 10/10] Remove unused functions that release addresses
Since address sets are now recalculated on demand instead of being
cached, there's no need for functions that release addresses.
---
src/conf/domain_addr.c | 92 ------------------------------------------------
src/conf/domain_addr.h | 12 -------
src/libvirt_private.syms | 3 --
3 files changed, 107 deletions(-)
diff --git a/src/conf/domain_addr.c b/src/conf/domain_addr.c
index fc3b9be..67c12a4 100644
--- a/src/conf/domain_addr.c
+++ b/src/conf/domain_addr.c
@@ -505,30 +505,6 @@ virDomainPCIAddressReleaseAddr(virDomainPCIAddressSetPtr addrs,
return 0;
}
-int
-virDomainPCIAddressReleaseSlot(virDomainPCIAddressSetPtr addrs,
- virPCIDeviceAddressPtr addr)
-{
- /* permit any kind of connection type in validation, since we
- * already had it, and are giving it back.
- */
- virDomainPCIConnectFlags flags = VIR_PCI_CONNECT_TYPES_MASK;
- int ret = -1;
- char *addrStr = NULL;
-
- if (!(addrStr = virDomainPCIAddressAsString(addr)))
- goto cleanup;
-
- if (!virDomainPCIAddressValidate(addrs, addr, addrStr, flags, false))
- goto cleanup;
-
- addrs->buses[addr->bus].slots[addr->slot] = 0;
- ret = 0;
- cleanup:
- VIR_FREE(addrStr);
- return ret;
-}
-
virDomainPCIAddressSetPtr
virDomainPCIAddressSetAlloc(unsigned int nbuses)
@@ -781,30 +757,6 @@ virDomainCCWAddressValidate(virDomainDefPtr def ATTRIBUTE_UNUSED,
return virDomainCCWAddressAssign(info, data, false);
}
-int
-virDomainCCWAddressReleaseAddr(virDomainCCWAddressSetPtr addrs,
- virDomainDeviceInfoPtr dev)
-{
- char *addr;
- int ret;
-
- addr = virDomainCCWAddressAsString(&(dev->addr.ccw));
- if (!addr)
- return -1;
-
- if ((ret = virHashRemoveEntry(addrs->defined, addr)) == 0 &&
- dev->addr.ccw.cssid == addrs->next.cssid &&
- dev->addr.ccw.ssid == addrs->next.ssid &&
- dev->addr.ccw.devno < addrs->next.devno) {
- addrs->next.devno = dev->addr.ccw.devno;
- addrs->next.assigned = false;
- }
-
- VIR_FREE(addr);
-
- return ret;
-}
-
void virDomainCCWAddressSetFree(virDomainCCWAddressSetPtr addrs)
{
if (!addrs)
@@ -1238,47 +1190,3 @@ virDomainVirtioSerialAddrReserve(virDomainDefPtr def
ATTRIBUTE_UNUSED,
VIR_FREE(str);
return ret;
}
-
-/* virDomainVirtioSerialAddrRelease
- *
- * Release the virtio serial address of the device
- */
-int
-virDomainVirtioSerialAddrRelease(virDomainVirtioSerialAddrSetPtr addrs,
- virDomainDeviceInfoPtr info)
-{
- virBitmapPtr map;
- char *str = NULL;
- int ret = -1;
- ssize_t i;
-
- if (info->type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_SERIAL ||
- info->addr.vioserial.port == 0)
- return 0;
-
- VIR_DEBUG("Releasing virtio serial %u %u",
info->addr.vioserial.controller,
- info->addr.vioserial.port);
-
- i = virDomainVirtioSerialAddrFindController(addrs,
info->addr.vioserial.controller);
- if (i < 0) {
- virReportError(VIR_ERR_XML_ERROR,
- _("virtio serial controller %u is missing"),
- info->addr.vioserial.controller);
- goto cleanup;
- }
-
- map = addrs->controllers[i]->ports;
- if (virBitmapClearBit(map, info->addr.vioserial.port) < 0) {
- virReportError(VIR_ERR_XML_ERROR,
- _("virtio serial controller %u does not have port %u"),
- info->addr.vioserial.controller,
- info->addr.vioserial.port);
- goto cleanup;
- }
-
- ret = 0;
-
- cleanup:
- VIR_FREE(str);
- return ret;
-}
diff --git a/src/conf/domain_addr.h b/src/conf/domain_addr.h
index 73d7474..a060683 100644
--- a/src/conf/domain_addr.h
+++ b/src/conf/domain_addr.h
@@ -143,10 +143,6 @@ int virDomainPCIAddressReleaseAddr(virDomainPCIAddressSetPtr addrs,
virPCIDeviceAddressPtr addr)
ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2);
-int virDomainPCIAddressReleaseSlot(virDomainPCIAddressSetPtr addrs,
- virPCIDeviceAddressPtr addr)
- ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2);
-
int virDomainPCIAddressGetNextSlot(virDomainPCIAddressSetPtr addrs,
virPCIDeviceAddressPtr next_addr,
virDomainPCIConnectFlags flags)
@@ -180,9 +176,6 @@ int virDomainCCWAddressValidate(virDomainDefPtr def,
void *data)
ATTRIBUTE_NONNULL(3) ATTRIBUTE_NONNULL(4);
-int virDomainCCWAddressReleaseAddr(virDomainCCWAddressSetPtr addrs,
- virDomainDeviceInfoPtr dev)
- ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2);
virDomainCCWAddressSetPtr virDomainCCWAddressSetCreate(void);
struct _virDomainVirtioSerialController {
@@ -235,9 +228,4 @@ virDomainVirtioSerialAddrReserve(virDomainDefPtr def,
void *data)
ATTRIBUTE_NONNULL(3) ATTRIBUTE_NONNULL(4);
-int
-virDomainVirtioSerialAddrRelease(virDomainVirtioSerialAddrSetPtr addrs,
- virDomainDeviceInfoPtr info)
- ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2);
-
#endif /* __DOMAIN_ADDR_H__ */
diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms
index f0a904c..bdf8304 100644
--- a/src/libvirt_private.syms
+++ b/src/libvirt_private.syms
@@ -87,7 +87,6 @@ virPCIDeviceAddressParseXML;
# conf/domain_addr.h
virDomainCCWAddressAllocate;
virDomainCCWAddressAssign;
-virDomainCCWAddressReleaseAddr;
virDomainCCWAddressSetCreate;
virDomainCCWAddressSetFree;
virDomainCCWAddressValidate;
@@ -97,7 +96,6 @@ virDomainPCIAddressBusSetModel;
virDomainPCIAddressEnsureAddr;
virDomainPCIAddressFlagsCompatible;
virDomainPCIAddressGetNextSlot;
-virDomainPCIAddressReleaseSlot;
virDomainPCIAddressReserveAddr;
virDomainPCIAddressReserveNextSlot;
virDomainPCIAddressReserveSlot;
@@ -110,7 +108,6 @@ virDomainPCIControllerModelToConnectType;
virDomainVirtioSerialAddrAssign;
virDomainVirtioSerialAddrAutoAssign;
virDomainVirtioSerialAddrIsComplete;
-virDomainVirtioSerialAddrRelease;
virDomainVirtioSerialAddrReserve;
virDomainVirtioSerialAddrSetAddControllers;
virDomainVirtioSerialAddrSetCreate;
--
2.7.4 (Apple Git-66)
3048
days inactive
3048
days old
10 comments
1 participants
participants (1)
-
Tomasz Flendrich