1:48 a.m.
On 05/04/2012 09:23 AM, ovirt(a)qip.ru wrote:
Engine is incorrectly show cpu name (cluster compatibility is set to
3.1)
all hosts in my cluster engine are shown as Conroe, but I have 2 hosts
from Nehalem family and 2 from SandyBridge
this host must be SandyBridge but shown as Conroe
vdsm reports the model at the end of the cpuFlags based on libvirt
reporting models. cc'ing libvirt list for their thoughts.
# vdsClient -s 0 getVdsCaps
HBAInventory = {'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:7e8ac59efbe0'}], 'FC': []}
ISCSIInitiatorName = iqn.1994-05.com.redhat:7e8ac59efbe0
bondings = {'bond4': {'addr': '', 'cfg': {},
'mtu': '1500', 'netmask':
'', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'},
'bond0': {'addr': '',
'cfg': {}, 'mtu': '1500', 'netmask': '',
'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}, 'bond1': {'addr': '',
'cfg': {}, 'mtu': '1500',
'netmask': '', 'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}, 'bond2':
{'addr': '', 'cfg': {}, 'mtu': '1500',
'netmask': '', 'slaves': [],
'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr':
'', 'cfg': {}, 'mtu':
'1500', 'netmask': '', 'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}}
clusterLevels = ['3.0', '3.1']
cpuCores = 4
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_coreduo,model_Conroe
cpuModel = Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz
cpuSockets = 1
cpuSpeed = 1600.000
emulatedMachines = ['pc-0.14', 'pc', 'fedora-13',
'pc-0.13', 'pc-0.12',
'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.14', 'pc',
'fedora-13', 'pc-0.13',
'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc']
guestOverhead = 65
hooks = {}
kvmEnabled = true
lastClient = 192.168.131.42
lastClientIface = ovirtmgmt
management_ip =
memSize = 16032
networks = {'ovirtmgmt': {'addr': '192.168.130.73',
'cfg': {'DELAY':
'0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp',
'DEVICE': 'ovirtmgmt',
'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'mtu':
'1500', 'netmask':
'255.255.0.0', 'stp': 'off', 'bridged': 'True',
'gateway':
'192.168.131.17', 'ports': ['p6p1']}, 'Storage':
{'addr':
'172.16.0.100', 'cfg': {'IPADDR': '172.16.0.100',
'DELAY': '0',
'NETMASK': '255.255.255.0', 'STP': 'no',
'DEVICE': 'Storage', 'TYPE':
'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500',
'netmask': '255.255.255.0',
'stp': 'off', 'bridged': 'True', 'gateway':
'0.0.0.0', 'ports': ['p4p1']}}
nics = {'p4p1': {'hwaddr': '00:1B:21:1D:B6:E2',
'netmask': '', 'speed':
1000, 'addr': '', 'mtu': '1500'}, 'p6p1':
{'hwaddr':
'54:04:A6:A1:BA:39', 'netmask': '', 'speed': 1000,
'addr': '', 'mtu':
'1500'}}
operatingSystem = {'release': '1', 'version': '16',
'name': 'oVirt Node'}
packages2 = {'kernel': {'release': '6.fc16.x86_64',
'buildtime':
1334997800.0, 'version': '3.3.2'}, 'spice-server':
{'release': '1.fc16',
'buildtime': '1327339129', 'version': '0.10.1'},
'vdsm': {'release':
'0.161.git094ec00.fc16', 'buildtime': '1336045451',
'version': '4.9.6'},
'qemu-kvm': {'release': '4.fc16', 'buildtime':
'1327954752', 'version':
'0.15.1'}, 'libvirt': {'release': '1.fc16',
'buildtime': '1336048215',
'version': '0.9.11.3'}, 'qemu-img': {'release':
'4.fc16', 'buildtime':
'1327954752', 'version': '0.15.1'}}
reservedMem = 321
software_revision = 0
software_version = 4.9
supportedProtocols = ['2.2', '2.3']
supportedRHEVMs = ['3.0']
uuid = 1C8F4D00-5BCB-11D9-8A55-5404A6A1BA39_00:1B:21:1D:B6:E2
version_name = Snow Man
vlans = {}
vmTypes = ['kvm']
this host must be Nehalem but shown as Conroe
# vdsClient -s 0 getVdsCaps
HBAInventory = {'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:972b88629c1'}], 'FC': []}
ISCSIInitiatorName = iqn.1994-05.com.redhat:972b88629c1
bondings = {'bond4': {'addr': '', 'cfg': {},
'mtu': '1500', 'netmask':
'', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'},
'bond0': {'addr': '',
'cfg': {}, 'mtu': '1500', 'netmask': '',
'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}, 'bond1': {'addr': '',
'cfg': {}, 'mtu': '1500',
'netmask': '', 'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}, 'bond2':
{'addr': '', 'cfg': {}, 'mtu': '1500',
'netmask': '', 'slaves': [],
'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr':
'', 'cfg': {}, 'mtu':
'1500', 'netmask': '', 'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}}
clusterLevels = ['3.0', '3.1']
cpuCores = 8
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,popcnt,lahf_lm,ida,arat,epb,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_coreduo,model_Conroe
cpuModel = Intel(R) Xeon(R) CPU E5620 @ 2.40GHz
cpuSockets = 2
cpuSpeed = 1600.000
emulatedMachines = ['pc-0.14', 'pc', 'fedora-13',
'pc-0.13', 'pc-0.12',
'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.14', 'pc',
'fedora-13', 'pc-0.13',
'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc']
guestOverhead = 65
hooks = {}
kvmEnabled = true
lastClient = 192.168.131.42
lastClientIface = ovirtmgmt
management_ip =
memSize = 36200
networks = {'ovirtmgmt': {'addr': '192.168.131.46',
'cfg': {'DELAY':
'0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp',
'DEVICE': 'ovirtmgmt',
'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'mtu':
'1500', 'netmask':
'255.255.0.0', 'stp': 'off', 'bridged': 'True',
'gateway':
'192.168.131.17', 'ports': ['em1']}, 'Storage':
{'addr': '172.16.0.104',
'cfg': {'IPADDR': '172.16.0.104', 'DELAY': '0',
'NM_CONTROLLED': 'no',
'NETMASK': '255.255.255.0', 'STP': 'no',
'DEVICE': 'Storage', 'TYPE':
'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500',
'netmask': '255.255.255.0',
'stp': 'off', 'bridged': 'True', 'gateway':
'0.0.0.0', 'ports': ['em2']}}
nics = {'em1': {'hwaddr': '00:25:90:66:53:E8', 'netmask':
'', 'speed':
1000, 'addr': '', 'mtu': '1500'}, 'em2':
{'hwaddr': '00:25:90:66:53:E9',
'netmask': '', 'speed': 100, 'addr': '',
'mtu': '1500'}}
operatingSystem = {'release': '1', 'version': '16',
'name': 'oVirt Node'}
packages2 = {'kernel': {'release': '6.fc16.x86_64',
'buildtime':
1334997800.0, 'version': '3.3.2'}, 'spice-server':
{'release': '1.fc16',
'buildtime': '1327339129', 'version': '0.10.1'},
'vdsm': {'release':
'0.155.git457d1a0.fc16', 'buildtime': '1335883691',
'version': '4.9.6'},
'qemu-kvm': {'release': '4.fc16', 'buildtime':
'1327954752', 'version':
'0.15.1'}, 'libvirt': {'release': '1.fc16',
'buildtime': '1335356374',
'version': '0.9.11'}, 'qemu-img': {'release':
'4.fc16', 'buildtime':
'1327954752', 'version': '0.15.1'}}
reservedMem = 321
software_revision = 0
software_version = 4.9
supportedProtocols = ['2.2', '2.3']
supportedRHEVMs = ['3.0']
uuid = 49434D53-0200-9066-2500-66902500E853_00:25:90:66:53:E8
version_name = Snow Man
vlans = {}
vmTypes = ['kvm']
Птн 04 Май 2012 09:14:22 +0400, Itamar Heim <iheim(a)redhat.com> написал:
On 05/04/2012 06:49 AM, Nicholas Kesick wrote:
> I managed to get a host successfully added into oVirt Manager
(Fedora16
> minimum install, then used the wiki RPM install method), but the
last
> event reports "Host <hostname> moved to Non-operational state as
host
> does not meet the cluster's minimum CPU level. Missing CPU features:
> CpuFlags"
>
> Can anyone shine some light on the problem? The CPU does support
> virtualization... and as far as I can tell from cat /proc/cpuinfo
does
> does have cpu flags.
> flags : fpu vme de pse tsc msr *pae* mce cx8 apic sep mtrr pge
mca cmov
> pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall
nx lm
> constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl *vmx* est
cid cx16
> xtpr pdcm lahf_lm tpr_shadow
what is the cpu level of the cluster?
what cluster compatibility level?
what does vdsClient -s 0 getVdsCaps shows for cpu flags?
>
> Many thanks
> - Nick
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> nicspellword"="">ovirt.org/mailman/listinfo/users"
title="Открыть
внешнюю ссылку">http://lists.ovirt.org/mailman/listinfo/users
<http://lists.%3Cspan%20class=>
_______________________________________________
Users mailing list
Users(a)ovirt.org
nicspellword"="">ovirt.org/mailman/listinfo/users"
title="Открыть
внешнюю ссылку">http://lists.ovirt.org/mailman/listinfo/users
<http://lists.%3Cspan%20class=>
--
8:49 a.m.
New subject: [libvirt] [Users] Host missing cpuFlags
On Fri, May 04, 2012 at 09:48:23 +0300, Itamar Heim wrote:
On 05/04/2012 09:23 AM, ovirt(a)qip.ru wrote:
> Engine is incorrectly show cpu name (cluster compatibility is set to 3.1)
>
> all hosts in my cluster engine are shown as Conroe, but I have 2 hosts
> from Nehalem family and 2 from SandyBridge
>
> this host must be SandyBridge but shown as Conroe
vdsm reports the model at the end of the cpuFlags based on libvirt
reporting models. cc'ing libvirt list for their thoughts.
Hmm, at first glance, it seems like the features really describe
SandyBridge/Nehalem CPUs and not just Conroe. Could you provide the output of
``virsh capabilities'' (the subtree starting with <cpu> element is enough)
run
on both types of hosts? Also, from the output you provided, it looks like you
are using libvirt 0.9.11.3, is that right?
Jirka
4585
days inactive
4585
days old
1 comments
2 participants
participants (2)
-
Itamar Heim -
Jiri Denemark