This patch adds functionality to allow libvirt to configure the 'dot1q-tunnel' modes(802.1ad double-tagged) on openvswitch networks. For example: <interface type='bridge'> <mac address='2c:da:41:1d:05:42'/> <source bridge='ovs0'/> <vlan> <tag id='41' nativeMode='dot1q-tunnel'/> </vlan> <virtualport type='openvswitch'> <parameters interfaceid='6401a152-0b99-40b5-92be-858810aa6d37'/> </virtualport> <model type='virtio'/> <driver name='vhost'/> <alias name='net0'/> </interface> Signed-off-by: ZhiPeng Lu <luzhipeng(a)uniudc.com&gt; --- v1->v2: 1. Fix "make syntax-check" failure v2->v3: 1. remove other_config when updating vlan v3->v4: 1. add commit message that has a brief description of the new feature 2. add tests for 'dot1q-tunnel' vlan mode docs/formatdomain.html.in | 20 ++++++++++++++------ docs/formatnetwork.html.in | 20 +++++++++++--------- docs/schemas/networkcommon.rng | 1 + src/conf/netdev_vlan_conf.c | 2 +- src/util/virnetdevopenvswitch.c | 7 +++++++ src/util/virnetdevvlan.h | 1 + tests/networkxml2xmlin/openvswitch-net.xml | 9 +++++++++ tests/networkxml2xmlout/openvswitch-net.xml | 9 +++++++++ .../openvswitch-net-modified.xml | 9 +++++++++ .../openvswitch-net-more-portgroups.xml | 9 +++++++++ .../openvswitch-net-without-alice.xml | 9 +++++++++ 11 files changed, 80 insertions(+), 16 deletions(-) diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index 2ae5006..2a53d7c 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -6085,8 +6085,14 @@ qemu-kvm -net nic,model=? /dev/null <b>&lt;tag id='42'/&gt;</b> <b>&lt;tag id='123' nativeMode='untagged'/&gt;</b> <b>&lt;/vlan&gt;</b> - ... &lt;/interface&gt; + &lt;interface type='bridge'&gt; + <b>&lt;vlan trunk='yes'&gt;</b> + <b>&lt;tag id='42'/&gt;</b> + <b>&lt;tag id='123' nativeMode='dot1q-tunnel'/&gt;</b> + <b>&lt;/vlan&gt;</b> + &lt;/interface&gt; +... &lt;/devices&gt; ...</pre> @@ -6122,11 +6128,13 @@ qemu-kvm -net nic,model=? /dev/null </p> <p> For network connections using Open vSwitch it is also possible - to configure 'native-tagged' and 'native-untagged' VLAN modes - <span class="since">Since 1.1.0.</span> This is done with the - optional <code>nativeMode</code> attribute on - the <code>&lt;tag&gt;</code> subelement: <code>nativeMode</code> - may be set to 'tagged' or 'untagged'. The <code>id</code> + to configure 'native-tagged' and 'native-untagged' + <span class="since">Since 1.1.0.</span> and 'dot1q-tunnel' + (802.1ad double-tagged) <span class="since">Since 5.0.0.</span> + VLAN modes This is done with the optional <code>nativeMode</code> + attribute on the <code>&lt;tag&gt;</code> subelement: + <code>nativeMode</code> may be set to 'tagged' or 'untagged' or + 'dot1q-tunnel'. The <code>id</code> attribute of the <code>&lt;tag&gt;</code> subelement containing <code>nativeMode</code> sets which VLAN is considered to be the "native" VLAN for this interface, and diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index 509cca9..cfce4a1 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -705,16 +705,18 @@ </p> <p> For network connections using Open vSwitch it is also possible - to configure 'native-tagged' and 'native-untagged' VLAN modes - <span class="since">Since 1.1.0.</span> This is done with the - optional <code>nativeMode</code> attribute on - the <code>&lt;tag&gt;</code> subelement: <code>nativeMode</code> - may be set to 'tagged' or 'untagged'. The <code>id</code> - attribute of the <code>&lt;tag&gt;</code> subelement - containing <code>nativeMode</code> sets which VLAN is considered - to be the "native" VLAN for this interface, and + to configure 'native-tagged' and 'native-untagged' + <span class="since">Since 1.1.0.</span> + and 'dot1q-tunnel'(802.1ad double-tagged) VLAN modes. + <span class="since">Since 5.0.0.</span> This is done with the + optional <code>nativeMode</code> attribute on the + <code>&lt;tag&gt;</code> subelement: <code>nativeMode</code> + may be set to 'tagged' or 'untagged' or 'dot1q-tunnel'. + The <code>id</code> attribute of the <code>&lt;tag&gt;</code> + subelement containing <code>nativeMode</code> sets which VLAN is + considered to be the "native" VLAN for this interface, and the <code>nativeMode</code> attribute determines whether or not - traffic for that VLAN will be tagged. + traffic for that VLAN will be tagged or QinQ. </p> <p> <code>&lt;vlan&gt;</code> elements can also be specified in diff --git a/docs/schemas/networkcommon.rng b/docs/schemas/networkcommon.rng index 2699555..11c48ff 100644 --- a/docs/schemas/networkcommon.rng +++ b/docs/schemas/networkcommon.rng @@ -223,6 +223,7 @@ <choice> <value>tagged</value> <value>untagged</value> + <value>dot1q-tunnel</value> </choice> </attribute> </optional> diff --git a/src/conf/netdev_vlan_conf.c b/src/conf/netdev_vlan_conf.c index 57d73ed..892d31c 100644 --- a/src/conf/netdev_vlan_conf.c +++ b/src/conf/netdev_vlan_conf.c @@ -25,7 +25,7 @@ #define VIR_FROM_THIS VIR_FROM_NONE VIR_ENUM_IMPL(virNativeVlanMode, VIR_NATIVE_VLAN_MODE_LAST, - "default", "tagged", "untagged", + "default", "tagged", "untagged", "dot1q-tunnel", ); int diff --git a/src/util/virnetdevopenvswitch.c b/src/util/virnetdevopenvswitch.c index 4fa3a57..dd2aeac 100644 --- a/src/util/virnetdevopenvswitch.c +++ b/src/util/virnetdevopenvswitch.c @@ -85,6 +85,11 @@ virNetDevOpenvswitchConstructVlans(virCommandPtr cmd, virNetDevVlanPtr virtVlan) virCommandAddArg(cmd, "vlan_mode=native-untagged"); virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag); break; + case VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL: + virCommandAddArg(cmd, "vlan_mode=dot1q-tunnel"); + virCommandAddArg(cmd, "other_config:qinq-ethtype=802.1q"); + virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag); + break; case VIR_NATIVE_VLAN_MODE_DEFAULT: default: break; @@ -498,6 +503,8 @@ int virNetDevOpenvswitchUpdateVlan(const char *ifname, "--", "--if-exists", "clear", "Port", ifname, "tag", "--", "--if-exists", "clear", "Port", ifname, "trunk", "--", "--if-exists", "clear", "Port", ifname, "vlan_mode", + "--", "--if-exists", "remove", "Port", ifname, + "other_config", "qinq-ethtype", "--", "--if-exists", "set", "Port", ifname, NULL); if (virNetDevOpenvswitchConstructVlans(cmd, virtVlan) < 0) diff --git a/src/util/virnetdevvlan.h b/src/util/virnetdevvlan.h index 2a13759..9d0a2bd 100644 --- a/src/util/virnetdevvlan.h +++ b/src/util/virnetdevvlan.h @@ -27,6 +27,7 @@ typedef enum { VIR_NATIVE_VLAN_MODE_DEFAULT = 0, VIR_NATIVE_VLAN_MODE_TAGGED, VIR_NATIVE_VLAN_MODE_UNTAGGED, + VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL, VIR_NATIVE_VLAN_MODE_LAST } virNativeVlanMode; diff --git a/tests/networkxml2xmlin/openvswitch-net.xml b/tests/networkxml2xmlin/openvswitch-net.xml index 2f6084d..0952859 100644 --- a/tests/networkxml2xmlin/openvswitch-net.xml +++ b/tests/networkxml2xmlin/openvswitch-net.xml @@ -30,4 +30,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> diff --git a/tests/networkxml2xmlout/openvswitch-net.xml b/tests/networkxml2xmlout/openvswitch-net.xml index 2f6084d..0952859 100644 --- a/tests/networkxml2xmlout/openvswitch-net.xml +++ b/tests/networkxml2xmlout/openvswitch-net.xml @@ -30,4 +30,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> diff --git a/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml b/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml index cc0c344..e5794fc 100644 --- a/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml +++ b/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml @@ -30,4 +30,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> diff --git a/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml b/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml index 7c19ad9..3df0b96 100644 --- a/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml +++ b/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml @@ -41,4 +41,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> diff --git a/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml b/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml index 4104424..38846aa 100644 --- a/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml +++ b/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml @@ -20,4 +20,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> -- 1.8.3.1