1:17 p.m.
Changes since V1:
- Rebased to incorporate changes to generator and
removal of static driver structure initializers
- Other small fixups suggested by Matthias Bolte
To help speed the provisioning process for large domains, new QED disks are
created with backing to a template image. These disks are configured with copy
on read such that blocks that are read from the backing file are copied to the
new disk. This reduces I/O over a potentially costly path to the backing
image.
In such a configuration, there is a desire to remove the dependency on the
backing image as the domain runs. To accomplish this, qemu will provide an
interface to perform sequential copy on read operations during normal VM
operation. Once all data has been copied, the disk image's link to the backing
file is removed.
The virDomainBlockPull API family brings this functionality to libvirt.
virDomainBlockPullAll() instructs the hypervisor to stream the entire device in
the background. Progress of this operation can be checked with the function
virDomainBlockPullInfo(). An ongoing stream can be cancelled with
virDomainBlockPullAbort(). If a more controlled IO rate is desired,
virDomainBlockPull() can be used to perform a single increment of IO.
Subsequent calls to this function will automatically stream the appropriate
next increment until the disk has been fully populated.
An event (VIR_DOMAIN_EVENT_ID_BLOCK_PULL) will be emitted when a disk has been
fully populated or if a BlockPullAll() operation was terminated due to an
error. This event is useful to avoid polling on virDomainBlockPullInfo() for
completion and could also be used by the security driver to revoke access to
the backing file when it is no longer needed.
Note: I am sending this series out now (even though image streaming is not
quite committed to qemu upstream) because I want to start the review process.
At this stage, I expect only minor changes to the qemu implementation.
make check: PASS
make syntax-check: PASS
make -C tests valgrind: PASS
I am testing this API with Python Unittest (see the last patch).
[PATCH 1/8] Add new API virDomainBlockPull* to headers
[PATCH 2/8] virDomainBlockPull: Implement the main entry points
[PATCH 3/8] Add virDomainBlockPull support to the remote driver
[PATCH 4/8] Implement virDomainBlockPull for the qemu driver
[PATCH 5/8] Enable the virDomainBlockPull API in virsh
[PATCH 6/8] Enable virDomainBlockPull in the python API.
[PATCH 7/8] Asynchronous event for BlockPull completion
[PATCH 8/8] test: Python Unittests for DomainBlockPull API
1:17 p.m.
New subject: [libvirt] [PATCH 1/8] Add new API virDomainBlockPull* to headers
Set up the types for the block pull functions and insert them into the
virDriver structure definition. Symbols are exported in this patch to prevent
documentation compile failures.
* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings are
implemented later
* src/libvirt_public.syms: export symbols
Signed-off-by: Adam Litke <agl(a)us.ibm.com>
---
include/libvirt/libvirt.h.in | 39 +++++++++++++++++++++++++++++++++++++++
python/generator.py | 3 +++
src/driver.h | 22 ++++++++++++++++++++++
src/libvirt_public.syms | 4 ++++
4 files changed, 68 insertions(+), 0 deletions(-)
diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in
index df213f1..ba547c1 100644
--- a/include/libvirt/libvirt.h.in
+++ b/include/libvirt/libvirt.h.in
@@ -1156,6 +1156,45 @@ int virDomainUpdateDeviceFlags(virDomainPtr domain,
const char *xml, unsigned int flags);
/*
+ * BlockPull API
+ */
+
+/* An iterator for initiating and monitoring block pull operations */
+typedef unsigned long long virDomainBlockPullCursor;
+
+typedef struct _virDomainBlockPullInfo virDomainBlockPullInfo;
+struct _virDomainBlockPullInfo {
+ /*
+ * The following fields provide an indication of block pull progress. @cur
+ * indicates the current position and will be between 0 and @end. @end is
+ * the final cursor position for this operation and represents completion.
+ * To approximate progress, divide @cur by @end.
+ */
+ virDomainBlockPullCursor cur;
+ virDomainBlockPullCursor end;
+};
+typedef virDomainBlockPullInfo *virDomainBlockPullInfoPtr;
+
+int virDomainBlockPull(virDomainPtr dom,
+ const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags);
+
+int virDomainBlockPullAll(virDomainPtr dom,
+ const char *path,
+ unsigned int flags);
+
+int virDomainBlockPullAbort(virDomainPtr dom,
+ const char *path,
+ unsigned int flags);
+
+int virDomainGetBlockPullInfo(virDomainPtr dom,
+ const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags);
+
+
+/*
* NUMA support
*/
diff --git a/python/generator.py b/python/generator.py
index 7c38fdd..43e7414 100755
--- a/python/generator.py
+++ b/python/generator.py
@@ -178,6 +178,8 @@ def enum(type, name, value):
functions_failed = []
functions_skipped = [
"virConnectListDomains",
+ 'virDomainBlockPull',
+ 'virDomainGetBlockPullInfo',
]
skipped_modules = {
@@ -192,6 +194,7 @@ skipped_types = {
'virConnectDomainEventIOErrorCallback': "No function types in
python",
'virConnectDomainEventGraphicsCallback': "No function types in
python",
'virEventAddHandleFunc': "No function types in python",
+ 'virDomainBlockPullInfoPtr': "Not implemented yet",
}
#######################################################################
diff --git a/src/driver.h b/src/driver.h
index 5df798a..4b30390 100644
--- a/src/driver.h
+++ b/src/driver.h
@@ -615,6 +615,24 @@ typedef int
unsigned long flags,
int cancelled);
+typedef int
+ (*virDrvDomainBlockPull)(virDomainPtr dom, const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags);
+
+typedef int
+ (*virDrvDomainBlockPullAll)(virDomainPtr dom, const char *path,
+ unsigned int flags);
+
+typedef int
+ (*virDrvDomainBlockPullAbort)(virDomainPtr dom, const char *path,
+ unsigned int flags);
+
+typedef int
+ (*virDrvDomainGetBlockPullInfo)(virDomainPtr dom, const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags);
+
/**
* _virDriver:
*
@@ -749,6 +767,10 @@ struct _virDriver {
virDrvDomainMigratePerform3 domainMigratePerform3;
virDrvDomainMigrateFinish3 domainMigrateFinish3;
virDrvDomainMigrateConfirm3 domainMigrateConfirm3;
+ virDrvDomainBlockPull domainBlockPull;
+ virDrvDomainBlockPullAll domainBlockPullAll;
+ virDrvDomainBlockPullAbort domainBlockPullAbort;
+ virDrvDomainGetBlockPullInfo domainGetBlockPullInfo;
};
typedef int
diff --git a/src/libvirt_public.syms b/src/libvirt_public.syms
index 4d4299a..7d85d33 100644
--- a/src/libvirt_public.syms
+++ b/src/libvirt_public.syms
@@ -448,6 +448,10 @@ LIBVIRT_0.9.2 {
virInterfaceChangeBegin;
virInterfaceChangeCommit;
virInterfaceChangeRollback;
+ virDomainBlockPull;
+ virDomainBlockPullAll;
+ virDomainBlockPullAbort;
+ virDomainGetBlockPullInfo;
} LIBVIRT_0.9.0;
# .... define new API here using predicted next version number ....
--
1.7.3
4:41 a.m.
New subject: [libvirt] [PATCH 1/8] Add new API virDomainBlockPull* to headers
On Mon, Jun 06, 2011 at 01:17:55PM -0500, Adam Litke wrote:
Set up the types for the block pull functions and insert them into
the
virDriver structure definition. Symbols are exported in this patch to prevent
documentation compile failures.
* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings are
implemented later
* src/libvirt_public.syms: export symbols
Signed-off-by: Adam Litke <agl(a)us.ibm.com>
---
include/libvirt/libvirt.h.in | 39 +++++++++++++++++++++++++++++++++++++++
python/generator.py | 3 +++
src/driver.h | 22 ++++++++++++++++++++++
src/libvirt_public.syms | 4 ++++
4 files changed, 68 insertions(+), 0 deletions(-)
diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in
index df213f1..ba547c1 100644
--- a/include/libvirt/libvirt.h.in
+++ b/include/libvirt/libvirt.h.in
@@ -1156,6 +1156,45 @@ int virDomainUpdateDeviceFlags(virDomainPtr domain,
const char *xml, unsigned int flags);
/*
+ * BlockPull API
+ */
+
+/* An iterator for initiating and monitoring block pull operations */
+typedef unsigned long long virDomainBlockPullCursor;
+
+typedef struct _virDomainBlockPullInfo virDomainBlockPullInfo;
+struct _virDomainBlockPullInfo {
+ /*
+ * The following fields provide an indication of block pull progress. @cur
+ * indicates the current position and will be between 0 and @end. @end is
+ * the final cursor position for this operation and represents completion.
+ * To approximate progress, divide @cur by @end.
+ */
+ virDomainBlockPullCursor cur;
+ virDomainBlockPullCursor end;
+};
+typedef virDomainBlockPullInfo *virDomainBlockPullInfoPtr;
+
+int virDomainBlockPull(virDomainPtr dom,
+ const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags);
+
+int virDomainBlockPullAll(virDomainPtr dom,
+ const char *path,
+ unsigned int flags);
+
+int virDomainBlockPullAbort(virDomainPtr dom,
+ const char *path,
+ unsigned int flags);
+
+int virDomainGetBlockPullInfo(virDomainPtr dom,
+ const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags);
+
+
+/*
* NUMA support
*/
diff --git a/python/generator.py b/python/generator.py
index 7c38fdd..43e7414 100755
--- a/python/generator.py
+++ b/python/generator.py
@@ -178,6 +178,8 @@ def enum(type, name, value):
functions_failed = []
functions_skipped = [
"virConnectListDomains",
+ 'virDomainBlockPull',
+ 'virDomainGetBlockPullInfo',
]
skipped_modules = {
@@ -192,6 +194,7 @@ skipped_types = {
'virConnectDomainEventIOErrorCallback': "No function types in
python",
'virConnectDomainEventGraphicsCallback': "No function types in
python",
'virEventAddHandleFunc': "No function types in python",
+ 'virDomainBlockPullInfoPtr': "Not implemented yet",
}
#######################################################################
diff --git a/src/driver.h b/src/driver.h
index 5df798a..4b30390 100644
--- a/src/driver.h
+++ b/src/driver.h
@@ -615,6 +615,24 @@ typedef int
unsigned long flags,
int cancelled);
+typedef int
+ (*virDrvDomainBlockPull)(virDomainPtr dom, const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags);
+
+typedef int
+ (*virDrvDomainBlockPullAll)(virDomainPtr dom, const char *path,
+ unsigned int flags);
+
+typedef int
+ (*virDrvDomainBlockPullAbort)(virDomainPtr dom, const char *path,
+ unsigned int flags);
+
+typedef int
+ (*virDrvDomainGetBlockPullInfo)(virDomainPtr dom, const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags);
+
/**
* _virDriver:
*
@@ -749,6 +767,10 @@ struct _virDriver {
virDrvDomainMigratePerform3 domainMigratePerform3;
virDrvDomainMigrateFinish3 domainMigrateFinish3;
virDrvDomainMigrateConfirm3 domainMigrateConfirm3;
+ virDrvDomainBlockPull domainBlockPull;
+ virDrvDomainBlockPullAll domainBlockPullAll;
+ virDrvDomainBlockPullAbort domainBlockPullAbort;
+ virDrvDomainGetBlockPullInfo domainGetBlockPullInfo;
};
typedef int
diff --git a/src/libvirt_public.syms b/src/libvirt_public.syms
index 4d4299a..7d85d33 100644
--- a/src/libvirt_public.syms
+++ b/src/libvirt_public.syms
@@ -448,6 +448,10 @@ LIBVIRT_0.9.2 {
virInterfaceChangeBegin;
virInterfaceChangeCommit;
virInterfaceChangeRollback;
+ virDomainBlockPull;
+ virDomainBlockPullAll;
+ virDomainBlockPullAbort;
+ virDomainGetBlockPullInfo;
} LIBVIRT_0.9.0;
We've released 0.9.2 now, so this needs moving to a new version
block for 0.9.3
ACK to the rest of the patch
Daniel
--
|: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :|
|: http://libvirt.org -o- http://virt-manager.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
1:17 p.m.
New subject: [libvirt] [PATCH 2/8] virDomainBlockPull: Implement the main entry points
* src/libvirt.c: implement the main entry points
Signed-off-by: Adam Litke <agl(a)us.ibm.com>
---
src/libvirt.c | 252 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 252 insertions(+), 0 deletions(-)
diff --git a/src/libvirt.c b/src/libvirt.c
index cbe1926..46d32cf 100644
--- a/src/libvirt.c
+++ b/src/libvirt.c
@@ -15012,3 +15012,255 @@ error:
virDispatchError(conn);
return -1;
}
+
+/**
+ * virDomainBlockPull:
+ * @dom: pointer to domain object
+ * @path: Fully-qualified filename of disk
+ * @info: A pointer to a virDomainBlockPullInfo structure, or NULL
+ * @flags: currently unused, for future extension
+ *
+ * Populate a disk image with data from its backing image. Once all data from
+ * its backing image has been pulled, the disk no longer depends on a backing
+ * image. This function works incrementally, performing a small amount of work
+ * each time it is called. When successful, @info is updated with the current
+ * progress.
+ *
+ * Returns -1 in case of failure, 0 when successful.
+ */
+int virDomainBlockPull(virDomainPtr dom,
+ const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags)
+{
+ virConnectPtr conn;
+
+ VIR_DOMAIN_DEBUG(dom, "path=%p, info=%p, flags=%u", path, info, flags);
+
+ virResetLastError();
+
+ if (!VIR_IS_CONNECTED_DOMAIN (dom)) {
+ virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__);
+ virDispatchError(NULL);
+ return -1;
+ }
+ conn = dom->conn;
+
+ if (dom->conn->flags & VIR_CONNECT_RO) {
+ virLibDomainError(VIR_ERR_OPERATION_DENIED, __FUNCTION__);
+ goto error;
+ }
+
+ if (!path) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("path is NULL"));
+ goto error;
+ }
+
+ if (flags != 0) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("flags must be zero"));
+ goto error;
+ }
+
+ if (conn->driver->domainBlockPull) {
+ int ret;
+ ret = conn->driver->domainBlockPull(dom, path, info, flags);
+ if (ret < 0)
+ goto error;
+ return ret;
+ }
+
+ virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__);
+
+error:
+ virDispatchError(dom->conn);
+ return -1;
+}
+
+/**
+ * virDomainBlockPullAll:
+ * @dom: pointer to domain object
+ * @path: Fully-qualified filename of disk
+ * @flags: currently unused, for future extension
+ *
+ * Populate a disk image with data from its backing image. Once all data from
+ * its backing image has been pulled, the disk no longer depends on a backing
+ * image. This function pulls data for the entire device in the background.
+ * Progress of the operation can be checked with virDomainGetBlockPullInfo() and
+ * the operation can be aborted with virDomainBlockPullAbort(). When finished,
+ * an asynchronous event is raised to indicate the final status.
+ *
+ * Returns 0 if the operation has started, -1 on failure.
+ */
+int virDomainBlockPullAll(virDomainPtr dom,
+ const char *path,
+ unsigned int flags)
+{
+ virConnectPtr conn;
+
+ VIR_DOMAIN_DEBUG(dom, "path=%p, flags=%u", path, flags);
+
+ virResetLastError();
+
+ if (!VIR_IS_CONNECTED_DOMAIN (dom)) {
+ virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__);
+ virDispatchError(NULL);
+ return -1;
+ }
+ conn = dom->conn;
+
+ if (dom->conn->flags & VIR_CONNECT_RO) {
+ virLibDomainError(VIR_ERR_OPERATION_DENIED, __FUNCTION__);
+ goto error;
+ }
+
+ if (!path) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("path is NULL"));
+ goto error;
+ }
+
+ if (flags != 0) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("flags must be zero"));
+ goto error;
+ }
+
+ if (conn->driver->domainBlockPullAll) {
+ int ret;
+ ret = conn->driver->domainBlockPullAll(dom, path, flags);
+ if (ret < 0)
+ goto error;
+ return ret;
+ }
+
+ virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__);
+
+error:
+ virDispatchError(dom->conn);
+ return -1;
+}
+
+/**
+ * virDomainBlockPullAbort:
+ * @dom: pointer to domain object
+ * @path: fully-qualified filename of disk
+ * @flags: currently unused, for future extension
+ *
+ * Cancel a pull operation previously started by virDomainBlockPullAll().
+ *
+ * Returns -1 in case of failure, 0 when successful.
+ */
+int virDomainBlockPullAbort(virDomainPtr dom,
+ const char *path,
+ unsigned int flags)
+{
+ virConnectPtr conn;
+
+ VIR_DOMAIN_DEBUG(dom, "path=%p, flags=%u", path, flags);
+
+ virResetLastError();
+
+ if (!VIR_IS_CONNECTED_DOMAIN (dom)) {
+ virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__);
+ virDispatchError(NULL);
+ return -1;
+ }
+ conn = dom->conn;
+
+ if (dom->conn->flags & VIR_CONNECT_RO) {
+ virLibDomainError(VIR_ERR_OPERATION_DENIED, __FUNCTION__);
+ goto error;
+ }
+
+ if (!path) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("path is NULL"));
+ goto error;
+ }
+
+ if (flags != 0) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("flags must be zero"));
+ goto error;
+ }
+
+ if (conn->driver->domainBlockPullAbort) {
+ int ret;
+ ret = conn->driver->domainBlockPullAbort(dom, path, flags);
+ if (ret < 0)
+ goto error;
+ return ret;
+ }
+
+ virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__);
+
+error:
+ virDispatchError(dom->conn);
+ return -1;
+}
+
+/**
+ * virDomainGetBlockPullInfo:
+ * @dom: pointer to domain object
+ * @path: fully-qualified filename of disk
+ * @info: pointer to a virDomainBlockPullInfo structure
+ * @flags: currently unused, for future extension
+ *
+ * Request progress information on a block pull operation that has been started
+ * with virDomainBlockPullAll(). If an operation is active for the given
+ * parameters, @info will be updated with the current progress.
+ *
+ * Returns -1 in case of failure, 0 when successful.
+ */
+int virDomainGetBlockPullInfo(virDomainPtr dom,
+ const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags)
+{
+ virConnectPtr conn;
+
+ VIR_DOMAIN_DEBUG(dom, "path=%p, info=%p, flags=%u", path, info, flags);
+
+ virResetLastError();
+
+ if (!VIR_IS_CONNECTED_DOMAIN (dom)) {
+ virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__);
+ virDispatchError(NULL);
+ return -1;
+ }
+ conn = dom->conn;
+
+ if (!path) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("path is NULL"));
+ goto error;
+ }
+
+ if (!info) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("info is NULL"));
+ goto error;
+ }
+
+ if (flags != 0) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("flags must be zero"));
+ goto error;
+ }
+
+ if (conn->driver->domainGetBlockPullInfo) {
+ int ret;
+ ret = conn->driver->domainGetBlockPullInfo(dom, path, info, flags);
+ if (ret < 0)
+ goto error;
+ return ret;
+ }
+
+ virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__);
+
+error:
+ virDispatchError(dom->conn);
+ return -1;
+}
--
1.7.3
4:44 a.m.
New subject: [libvirt] [PATCH 2/8] virDomainBlockPull: Implement the main entry points
On Mon, Jun 06, 2011 at 01:17:56PM -0500, Adam Litke wrote:
* src/libvirt.c: implement the main entry points
Signed-off-by: Adam Litke <agl(a)us.ibm.com>
---
src/libvirt.c | 252 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 252 insertions(+), 0 deletions(-)
diff --git a/src/libvirt.c b/src/libvirt.c
index cbe1926..46d32cf 100644
--- a/src/libvirt.c
+++ b/src/libvirt.c
@@ -15012,3 +15012,255 @@ error:
virDispatchError(conn);
return -1;
}
+
+/**
+ * virDomainBlockPull:
+ * @dom: pointer to domain object
+ * @path: Fully-qualified filename of disk
+ * @info: A pointer to a virDomainBlockPullInfo structure, or NULL
+ * @flags: currently unused, for future extension
+ *
+ * Populate a disk image with data from its backing image. Once all data from
+ * its backing image has been pulled, the disk no longer depends on a backing
+ * image. This function works incrementally, performing a small amount of work
+ * each time it is called. When successful, @info is updated with the current
+ * progress.
+ *
+ * Returns -1 in case of failure, 0 when successful.
+ */
+int virDomainBlockPull(virDomainPtr dom,
+ const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags)
+{
+ virConnectPtr conn;
+
+ VIR_DOMAIN_DEBUG(dom, "path=%p, info=%p, flags=%u", path, info, flags);
+
+ virResetLastError();
+
+ if (!VIR_IS_CONNECTED_DOMAIN (dom)) {
+ virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__);
+ virDispatchError(NULL);
+ return -1;
+ }
+ conn = dom->conn;
+
+ if (dom->conn->flags & VIR_CONNECT_RO) {
+ virLibDomainError(VIR_ERR_OPERATION_DENIED, __FUNCTION__);
+ goto error;
+ }
+
+ if (!path) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("path is NULL"));
+ goto error;
+ }
+
+ if (flags != 0) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("flags must be zero"));
+ goto error;
+ }
'Flags' shouldn't be checked in the public API entry points.
Instead the driver implementing the API should add a call
to
virCheckFlags(MASK-OF-ALLOWED-FLAGS, RETURN-VALUE);
eg, in this case add to the QEMU driver:
virCheckFlags(0, -1);
+
+ if (conn->driver->domainBlockPull) {
+ int ret;
+ ret = conn->driver->domainBlockPull(dom, path, info, flags);
+ if (ret < 0)
+ goto error;
+ return ret;
+ }
+
+ virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__);
+
+error:
+ virDispatchError(dom->conn);
+ return -1;
+}
+
+/**
+ * virDomainBlockPullAll:
+ * @dom: pointer to domain object
+ * @path: Fully-qualified filename of disk
+ * @flags: currently unused, for future extension
+ *
+ * Populate a disk image with data from its backing image. Once all data from
+ * its backing image has been pulled, the disk no longer depends on a backing
+ * image. This function pulls data for the entire device in the background.
+ * Progress of the operation can be checked with virDomainGetBlockPullInfo() and
+ * the operation can be aborted with virDomainBlockPullAbort(). When finished,
+ * an asynchronous event is raised to indicate the final status.
+ *
+ * Returns 0 if the operation has started, -1 on failure.
+ */
+int virDomainBlockPullAll(virDomainPtr dom,
+ const char *path,
+ unsigned int flags)
+{
+ virConnectPtr conn;
+
+ VIR_DOMAIN_DEBUG(dom, "path=%p, flags=%u", path, flags);
+
+ virResetLastError();
+
+ if (!VIR_IS_CONNECTED_DOMAIN (dom)) {
+ virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__);
+ virDispatchError(NULL);
+ return -1;
+ }
+ conn = dom->conn;
+
+ if (dom->conn->flags & VIR_CONNECT_RO) {
+ virLibDomainError(VIR_ERR_OPERATION_DENIED, __FUNCTION__);
+ goto error;
+ }
+
+ if (!path) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("path is NULL"));
+ goto error;
+ }
+
+ if (flags != 0) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("flags must be zero"));
+ goto error;
+ }
Same comment as previous API
+
+ if (conn->driver->domainBlockPullAll) {
+ int ret;
+ ret = conn->driver->domainBlockPullAll(dom, path, flags);
+ if (ret < 0)
+ goto error;
+ return ret;
+ }
+
+ virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__);
+
+error:
+ virDispatchError(dom->conn);
+ return -1;
+}
+
+/**
+ * virDomainBlockPullAbort:
+ * @dom: pointer to domain object
+ * @path: fully-qualified filename of disk
+ * @flags: currently unused, for future extension
+ *
+ * Cancel a pull operation previously started by virDomainBlockPullAll().
+ *
+ * Returns -1 in case of failure, 0 when successful.
+ */
+int virDomainBlockPullAbort(virDomainPtr dom,
+ const char *path,
+ unsigned int flags)
+{
+ virConnectPtr conn;
+
+ VIR_DOMAIN_DEBUG(dom, "path=%p, flags=%u", path, flags);
+
+ virResetLastError();
+
+ if (!VIR_IS_CONNECTED_DOMAIN (dom)) {
+ virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__);
+ virDispatchError(NULL);
+ return -1;
+ }
+ conn = dom->conn;
+
+ if (dom->conn->flags & VIR_CONNECT_RO) {
+ virLibDomainError(VIR_ERR_OPERATION_DENIED, __FUNCTION__);
+ goto error;
+ }
+
+ if (!path) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("path is NULL"));
+ goto error;
+ }
+
+ if (flags != 0) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("flags must be zero"));
+ goto error;
+ }
Same comment as previous API
+ if (conn->driver->domainBlockPullAbort) {
+ int ret;
+ ret = conn->driver->domainBlockPullAbort(dom, path, flags);
+ if (ret < 0)
+ goto error;
+ return ret;
+ }
+
+ virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__);
+
+error:
+ virDispatchError(dom->conn);
+ return -1;
+}
+
+/**
+ * virDomainGetBlockPullInfo:
+ * @dom: pointer to domain object
+ * @path: fully-qualified filename of disk
+ * @info: pointer to a virDomainBlockPullInfo structure
+ * @flags: currently unused, for future extension
+ *
+ * Request progress information on a block pull operation that has been started
+ * with virDomainBlockPullAll(). If an operation is active for the given
+ * parameters, @info will be updated with the current progress.
+ *
+ * Returns -1 in case of failure, 0 when successful.
+ */
+int virDomainGetBlockPullInfo(virDomainPtr dom,
+ const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags)
+{
+ virConnectPtr conn;
+
+ VIR_DOMAIN_DEBUG(dom, "path=%p, info=%p, flags=%u", path, info, flags);
+
+ virResetLastError();
+
+ if (!VIR_IS_CONNECTED_DOMAIN (dom)) {
+ virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__);
+ virDispatchError(NULL);
+ return -1;
+ }
+ conn = dom->conn;
+
+ if (!path) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("path is NULL"));
+ goto error;
+ }
+
+ if (!info) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("info is NULL"));
+ goto error;
+ }
+
+ if (flags != 0) {
+ virLibDomainError(VIR_ERR_INVALID_ARG,
+ _("flags must be zero"));
+ goto error;
+ }
Same comment as previous API
+
+
+ if (conn->driver->domainGetBlockPullInfo) {
+ int ret;
+ ret = conn->driver->domainGetBlockPullInfo(dom, path, info, flags);
+ if (ret < 0)
+ goto error;
+ return ret;
+ }
+
+ virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__);
+
+error:
+ virDispatchError(dom->conn);
+ return -1;
+}
Regards,
Daniel
--
|: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :|
|: http://libvirt.org -o- http://virt-manager.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
1:17 p.m.
New subject: [libvirt] [PATCH 3/8] Add virDomainBlockPull support to the remote driver
The generator can handle DomainBlockPullAll and DomainBlockPullAbort.
DomainBlockPull and DomainBlockPullInfo must be written by hand.
* src/remote/remote_protocol.x: provide defines for the new entry points
* src/remote/remote_driver.c daemon/remote.c: implement the client and
server side
* src/remote_protocol-structs: structure definitions for protocol verification
Signed-off-by: Adam Litke <agl(a)us.ibm.com>
---
daemon/remote.c | 71 ++++++++++++++++++++++++++++++++++++++++++
src/remote/remote_driver.c | 68 ++++++++++++++++++++++++++++++++++++++++
src/remote/remote_protocol.x | 40 +++++++++++++++++++++++-
src/remote_protocol-structs | 28 ++++++++++++++++
4 files changed, 206 insertions(+), 1 deletions(-)
diff --git a/daemon/remote.c b/daemon/remote.c
index 49058f2..e0b681c 100644
--- a/daemon/remote.c
+++ b/daemon/remote.c
@@ -1474,6 +1474,77 @@ cleanup:
return rv;
}
+static int
+remoteDispatchDomainBlockPull(struct qemud_server *server ATTRIBUTE_UNUSED,
+ struct qemud_client *client ATTRIBUTE_UNUSED,
+ virConnectPtr conn,
+ remote_message_header *hdr ATTRIBUTE_UNUSED,
+ remote_error * rerr,
+ remote_domain_block_pull_args *args,
+ remote_domain_block_pull_ret *ret)
+{
+ virDomainPtr dom = NULL;
+ virDomainBlockPullInfo tmp;
+ int rv = -1;
+
+ if (!conn) {
+ virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("connection not
open"));
+ goto cleanup;
+ }
+
+ if (!(dom = get_nonnull_domain(conn, args->dom)))
+ goto cleanup;
+
+ if (virDomainBlockPull(dom, args->path, &tmp, args->flags) < 0)
+ goto cleanup;
+ rv = 0;
+ ret->cur = tmp.cur;
+ ret->end = tmp.end;
+
+cleanup:
+ if (rv < 0)
+ remoteDispatchError(rerr);
+ if (dom)
+ virDomainFree(dom);
+ return rv;
+}
+
+static int
+remoteDispatchDomainGetBlockPullInfo(struct qemud_server *server ATTRIBUTE_UNUSED,
+ struct qemud_client *client ATTRIBUTE_UNUSED,
+ virConnectPtr conn,
+ remote_message_header *hdr ATTRIBUTE_UNUSED,
+ remote_error * rerr,
+ remote_domain_get_block_pull_info_args *args,
+ remote_domain_get_block_pull_info_ret *ret)
+{
+ virDomainPtr dom = NULL;
+ virDomainBlockPullInfo tmp;
+ int rv = -1;
+
+ if (!conn) {
+ virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("connection not
open"));
+ goto cleanup;
+ }
+
+ if (!(dom = get_nonnull_domain(conn, args->dom)))
+ goto cleanup;
+
+ if (virDomainGetBlockPullInfo(dom, args->path, &tmp, args->flags) < 0)
+ goto cleanup;
+ rv = 0;
+ ret->cur = tmp.cur;
+ ret->end = tmp.end;
+
+cleanup:
+ if (rv < 0)
+ remoteDispatchError(rerr);
+ if (dom)
+ virDomainFree(dom);
+ return rv;
+}
+
+
/*-------------------------------------------------------------*/
static int
diff --git a/src/remote/remote_driver.c b/src/remote/remote_driver.c
index 8335a1a..de9359d 100644
--- a/src/remote/remote_driver.c
+++ b/src/remote/remote_driver.c
@@ -2509,6 +2509,70 @@ done:
return rv;
}
+static int remoteDomainBlockPull(virDomainPtr domain,
+ const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags)
+{
+ int rv = -1;
+ remote_domain_block_pull_args args;
+ remote_domain_block_pull_ret ret;
+ struct private_data *priv = domain->conn->privateData;
+
+ remoteDriverLock(priv);
+
+ make_nonnull_domain(&args.dom, domain);
+ args.path = (char *)path;
+ args.flags = flags;
+
+ if (call(domain->conn, priv, 0, REMOTE_PROC_DOMAIN_BLOCK_PULL,
+ (xdrproc_t)xdr_remote_domain_block_pull_args, (char *)&args,
+ (xdrproc_t)xdr_remote_domain_block_pull_ret, (char *)&ret) == -1)
+ goto done;
+
+ if (info) {
+ info->cur = ret.cur;
+ info->end = ret.end;
+ }
+ rv = 0;
+
+done:
+ remoteDriverUnlock(priv);
+ return rv;
+}
+
+static int remoteDomainGetBlockPullInfo(virDomainPtr domain,
+ const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags)
+{
+ int rv = -1;
+ remote_domain_get_block_pull_info_args args;
+ remote_domain_get_block_pull_info_ret ret;
+ struct private_data *priv = domain->conn->privateData;
+
+ remoteDriverLock(priv);
+
+ make_nonnull_domain(&args.dom, domain);
+ args.path = (char *)path;
+ args.flags = flags;
+
+ if (call(domain->conn, priv, 0, REMOTE_PROC_DOMAIN_GET_BLOCK_PULL_INFO,
+ (xdrproc_t)xdr_remote_domain_get_block_pull_info_args,
+ (char *)&args,
+ (xdrproc_t)xdr_remote_domain_get_block_pull_info_ret,
+ (char *)&ret) == -1)
+ goto done;
+
+ info->cur = ret.cur;
+ info->end = ret.end;
+ rv = 0;
+
+done:
+ remoteDriverUnlock(priv);
+ return rv;
+}
+
/*----------------------------------------------------------------------*/
static virDrvOpenStatus ATTRIBUTE_NONNULL (1)
@@ -6337,6 +6401,10 @@ static virDriver remote_driver = {
.domainMigratePerform3 = remoteDomainMigratePerform3, /* 0.9.2 */
.domainMigrateFinish3 = remoteDomainMigrateFinish3, /* 0.9.2 */
.domainMigrateConfirm3 = remoteDomainMigrateConfirm3, /* 0.9.2 */
+ .domainBlockPull = remoteDomainBlockPull, /* 0.9.2 */
+ .domainBlockPullAll = remoteDomainBlockPullAll, /* 0.9.2 */
+ .domainBlockPullAbort = remoteDomainBlockPullAbort, /* 0.9.2 */
+ .domainGetBlockPullInfo = remoteDomainGetBlockPullInfo, /* 0.9.2 */
};
static virNetworkDriver network_driver = {
diff --git a/src/remote/remote_protocol.x b/src/remote/remote_protocol.x
index c9b8cff..33669c2 100644
--- a/src/remote/remote_protocol.x
+++ b/src/remote/remote_protocol.x
@@ -911,6 +911,40 @@ struct remote_domain_set_autostart_args {
int autostart;
};
+struct remote_domain_block_pull_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ unsigned int flags;
+};
+
+struct remote_domain_block_pull_ret {
+ unsigned hyper cur;
+ unsigned hyper end;
+};
+
+struct remote_domain_block_pull_all_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ unsigned int flags;
+};
+
+struct remote_domain_block_pull_abort_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ unsigned int flags;
+};
+
+struct remote_domain_get_block_pull_info_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ unsigned int flags;
+};
+
+struct remote_domain_get_block_pull_info_ret {
+ unsigned hyper cur;
+ unsigned hyper end;
+};
+
/* Network calls: */
struct remote_num_of_networks_ret {
@@ -2297,7 +2331,11 @@ enum remote_procedure {
REMOTE_PROC_INTERFACE_CHANGE_COMMIT = 221, /* autogen autogen */
REMOTE_PROC_INTERFACE_CHANGE_ROLLBACK = 222, /* autogen autogen */
REMOTE_PROC_DOMAIN_GET_SCHEDULER_PARAMETERS_FLAGS = 223, /* skipgen autogen */
- REMOTE_PROC_DOMAIN_EVENT_CONTROL_ERROR = 224 /* skipgen skipgen */
+ REMOTE_PROC_DOMAIN_EVENT_CONTROL_ERROR = 224, /* skipgen skipgen */
+ REMOTE_PROC_DOMAIN_BLOCK_PULL = 225, /* skipgen skipgen */
+ REMOTE_PROC_DOMAIN_BLOCK_PULL_ALL = 226, /* autogen autogen */
+ REMOTE_PROC_DOMAIN_BLOCK_PULL_ABORT = 227, /* autogen autogen */
+ REMOTE_PROC_DOMAIN_GET_BLOCK_PULL_INFO = 228 /* skipgen skipgen */
/*
* Notice how the entries are grouped in sets of 10 ?
diff --git a/src/remote_protocol-structs b/src/remote_protocol-structs
index 1d90dd5..547f6e2 100644
--- a/src/remote_protocol-structs
+++ b/src/remote_protocol-structs
@@ -603,6 +603,34 @@ struct remote_domain_set_autostart_args {
remote_nonnull_domain dom;
int autostart;
};
+struct remote_domain_block_pull_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ u_int flags;
+};
+struct remote_domain_block_pull_ret {
+ uint64_t cur;
+ uint64_t end;
+};
+struct remote_domain_block_pull_all_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ u_int flags;
+};
+struct remote_domain_block_pull_abort_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ u_int flags;
+};
+struct remote_domain_get_block_pull_info_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ u_int flags;
+};
+struct remote_domain_get_block_pull_info_ret {
+ uint64_t cur;
+ uint64_t end;
+};
struct remote_num_of_networks_ret {
int num;
};
--
1.7.3
4:46 a.m.
New subject: [libvirt] [PATCH 3/8] Add virDomainBlockPull support to the remote driver
On Mon, Jun 06, 2011 at 01:17:57PM -0500, Adam Litke wrote:
The generator can handle DomainBlockPullAll and
DomainBlockPullAbort.
DomainBlockPull and DomainBlockPullInfo must be written by hand.
* src/remote/remote_protocol.x: provide defines for the new entry points
* src/remote/remote_driver.c daemon/remote.c: implement the client and
server side
* src/remote_protocol-structs: structure definitions for protocol verification
Signed-off-by: Adam Litke <agl(a)us.ibm.com>
---
daemon/remote.c | 71 ++++++++++++++++++++++++++++++++++++++++++
src/remote/remote_driver.c | 68 ++++++++++++++++++++++++++++++++++++++++
src/remote/remote_protocol.x | 40 +++++++++++++++++++++++-
src/remote_protocol-structs | 28 ++++++++++++++++
4 files changed, 206 insertions(+), 1 deletions(-)
diff --git a/daemon/remote.c b/daemon/remote.c
index 49058f2..e0b681c 100644
--- a/daemon/remote.c
+++ b/daemon/remote.c
@@ -1474,6 +1474,77 @@ cleanup:
return rv;
}
+static int
+remoteDispatchDomainBlockPull(struct qemud_server *server ATTRIBUTE_UNUSED,
+ struct qemud_client *client ATTRIBUTE_UNUSED,
+ virConnectPtr conn,
+ remote_message_header *hdr ATTRIBUTE_UNUSED,
+ remote_error * rerr,
+ remote_domain_block_pull_args *args,
+ remote_domain_block_pull_ret *ret)
+{
+ virDomainPtr dom = NULL;
+ virDomainBlockPullInfo tmp;
+ int rv = -1;
+
+ if (!conn) {
+ virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("connection not
open"));
+ goto cleanup;
+ }
+
+ if (!(dom = get_nonnull_domain(conn, args->dom)))
+ goto cleanup;
+
+ if (virDomainBlockPull(dom, args->path, &tmp, args->flags) < 0)
+ goto cleanup;
+ rv = 0;
+ ret->cur = tmp.cur;
+ ret->end = tmp.end;
It is more usual to have the 'rv = 0;' statement as the very last
thing before 'cleanup'
+
+cleanup:
+ if (rv < 0)
+ remoteDispatchError(rerr);
+ if (dom)
+ virDomainFree(dom);
+ return rv;
+}
+
+static int
+remoteDispatchDomainGetBlockPullInfo(struct qemud_server *server ATTRIBUTE_UNUSED,
+ struct qemud_client *client ATTRIBUTE_UNUSED,
+ virConnectPtr conn,
+ remote_message_header *hdr ATTRIBUTE_UNUSED,
+ remote_error * rerr,
+ remote_domain_get_block_pull_info_args *args,
+ remote_domain_get_block_pull_info_ret *ret)
+{
+ virDomainPtr dom = NULL;
+ virDomainBlockPullInfo tmp;
+ int rv = -1;
+
+ if (!conn) {
+ virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("connection not
open"));
+ goto cleanup;
+ }
+
+ if (!(dom = get_nonnull_domain(conn, args->dom)))
+ goto cleanup;
+
+ if (virDomainGetBlockPullInfo(dom, args->path, &tmp, args->flags) < 0)
+ goto cleanup;
+ rv = 0;
+ ret->cur = tmp.cur;
+ ret->end = tmp.end;
Same comment as above about 'rv'.
+
+cleanup:
+ if (rv < 0)
+ remoteDispatchError(rerr);
+ if (dom)
+ virDomainFree(dom);
+ return rv;
+}
+
+
/*-------------------------------------------------------------*/
static int
diff --git a/src/remote/remote_driver.c b/src/remote/remote_driver.c
index 8335a1a..de9359d 100644
--- a/src/remote/remote_driver.c
+++ b/src/remote/remote_driver.c
@@ -2509,6 +2509,70 @@ done:
return rv;
}
+static int remoteDomainBlockPull(virDomainPtr domain,
+ const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags)
+{
+ int rv = -1;
+ remote_domain_block_pull_args args;
+ remote_domain_block_pull_ret ret;
+ struct private_data *priv = domain->conn->privateData;
+
+ remoteDriverLock(priv);
+
+ make_nonnull_domain(&args.dom, domain);
+ args.path = (char *)path;
+ args.flags = flags;
+
+ if (call(domain->conn, priv, 0, REMOTE_PROC_DOMAIN_BLOCK_PULL,
+ (xdrproc_t)xdr_remote_domain_block_pull_args, (char *)&args,
+ (xdrproc_t)xdr_remote_domain_block_pull_ret, (char *)&ret) == -1)
+ goto done;
+
+ if (info) {
+ info->cur = ret.cur;
+ info->end = ret.end;
+ }
+ rv = 0;
+
+done:
+ remoteDriverUnlock(priv);
+ return rv;
+}
+
+static int remoteDomainGetBlockPullInfo(virDomainPtr domain,
+ const char *path,
+ virDomainBlockPullInfoPtr info,
+ unsigned int flags)
+{
+ int rv = -1;
+ remote_domain_get_block_pull_info_args args;
+ remote_domain_get_block_pull_info_ret ret;
+ struct private_data *priv = domain->conn->privateData;
+
+ remoteDriverLock(priv);
+
+ make_nonnull_domain(&args.dom, domain);
+ args.path = (char *)path;
+ args.flags = flags;
+
+ if (call(domain->conn, priv, 0, REMOTE_PROC_DOMAIN_GET_BLOCK_PULL_INFO,
+ (xdrproc_t)xdr_remote_domain_get_block_pull_info_args,
+ (char *)&args,
+ (xdrproc_t)xdr_remote_domain_get_block_pull_info_ret,
+ (char *)&ret) == -1)
+ goto done;
+
+ info->cur = ret.cur;
+ info->end = ret.end;
+ rv = 0;
+
+done:
+ remoteDriverUnlock(priv);
+ return rv;
+}
+
/*----------------------------------------------------------------------*/
static virDrvOpenStatus ATTRIBUTE_NONNULL (1)
@@ -6337,6 +6401,10 @@ static virDriver remote_driver = {
.domainMigratePerform3 = remoteDomainMigratePerform3, /* 0.9.2 */
.domainMigrateFinish3 = remoteDomainMigrateFinish3, /* 0.9.2 */
.domainMigrateConfirm3 = remoteDomainMigrateConfirm3, /* 0.9.2 */
+ .domainBlockPull = remoteDomainBlockPull, /* 0.9.2 */
+ .domainBlockPullAll = remoteDomainBlockPullAll, /* 0.9.2 */
+ .domainBlockPullAbort = remoteDomainBlockPullAbort, /* 0.9.2 */
+ .domainGetBlockPullInfo = remoteDomainGetBlockPullInfo, /* 0.9.2 */
};
These need updating to 0.9.3
static virNetworkDriver network_driver = {
diff --git a/src/remote/remote_protocol.x b/src/remote/remote_protocol.x
index c9b8cff..33669c2 100644
--- a/src/remote/remote_protocol.x
+++ b/src/remote/remote_protocol.x
@@ -911,6 +911,40 @@ struct remote_domain_set_autostart_args {
int autostart;
};
+struct remote_domain_block_pull_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ unsigned int flags;
+};
+
+struct remote_domain_block_pull_ret {
+ unsigned hyper cur;
+ unsigned hyper end;
+};
+
+struct remote_domain_block_pull_all_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ unsigned int flags;
+};
+
+struct remote_domain_block_pull_abort_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ unsigned int flags;
+};
+
+struct remote_domain_get_block_pull_info_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ unsigned int flags;
+};
+
+struct remote_domain_get_block_pull_info_ret {
+ unsigned hyper cur;
+ unsigned hyper end;
+};
+
/* Network calls: */
struct remote_num_of_networks_ret {
@@ -2297,7 +2331,11 @@ enum remote_procedure {
REMOTE_PROC_INTERFACE_CHANGE_COMMIT = 221, /* autogen autogen */
REMOTE_PROC_INTERFACE_CHANGE_ROLLBACK = 222, /* autogen autogen */
REMOTE_PROC_DOMAIN_GET_SCHEDULER_PARAMETERS_FLAGS = 223, /* skipgen autogen */
- REMOTE_PROC_DOMAIN_EVENT_CONTROL_ERROR = 224 /* skipgen skipgen */
+ REMOTE_PROC_DOMAIN_EVENT_CONTROL_ERROR = 224, /* skipgen skipgen */
+ REMOTE_PROC_DOMAIN_BLOCK_PULL = 225, /* skipgen skipgen */
+ REMOTE_PROC_DOMAIN_BLOCK_PULL_ALL = 226, /* autogen autogen */
+ REMOTE_PROC_DOMAIN_BLOCK_PULL_ABORT = 227, /* autogen autogen */
+ REMOTE_PROC_DOMAIN_GET_BLOCK_PULL_INFO = 228 /* skipgen skipgen */
/*
* Notice how the entries are grouped in sets of 10 ?
diff --git a/src/remote_protocol-structs b/src/remote_protocol-structs
index 1d90dd5..547f6e2 100644
--- a/src/remote_protocol-structs
+++ b/src/remote_protocol-structs
@@ -603,6 +603,34 @@ struct remote_domain_set_autostart_args {
remote_nonnull_domain dom;
int autostart;
};
+struct remote_domain_block_pull_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ u_int flags;
+};
+struct remote_domain_block_pull_ret {
+ uint64_t cur;
+ uint64_t end;
+};
+struct remote_domain_block_pull_all_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ u_int flags;
+};
+struct remote_domain_block_pull_abort_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ u_int flags;
+};
+struct remote_domain_get_block_pull_info_args {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ u_int flags;
+};
+struct remote_domain_get_block_pull_info_ret {
+ uint64_t cur;
+ uint64_t end;
+};
struct remote_num_of_networks_ret {
int num;
};
Regards,
Daniel
--
|: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :|
|: http://libvirt.org -o- http://virt-manager.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
1:17 p.m.
New subject: [libvirt] [PATCH 4/8] Implement virDomainBlockPull for the qemu driver
The virDomainBlockPull* family of commands are enabled by the
'block_stream' and 'info block_stream' qemu monitor commands.
* src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement disk
streaming by using the stream and info stream text monitor commands
* src/qemu/qemu_monitor_json.[ch]: implement commands using the qmp monitor
Signed-off-by: Adam Litke <agl(a)us.ibm.com>
---
src/qemu/qemu_driver.c | 108 +++++++++++++++++++++++++++++++
src/qemu/qemu_monitor.c | 16 +++++
src/qemu/qemu_monitor.h | 13 ++++
src/qemu/qemu_monitor_json.c | 117 ++++++++++++++++++++++++++++++++++
src/qemu/qemu_monitor_json.h | 4 +
src/qemu/qemu_monitor_text.c | 145 ++++++++++++++++++++++++++++++++++++++++++
src/qemu/qemu_monitor_text.h | 5 ++
7 files changed, 408 insertions(+), 0 deletions(-)
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index 2957467..4b82398 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -7973,6 +7973,110 @@ cleanup:
return ret;
}
+static const char *
+qemuDiskPathToAlias(virDomainObjPtr vm, const char *path) {
+ int i;
+ char *ret = NULL;
+
+ for (i = 0 ; i < vm->def->ndisks ; i++) {
+ virDomainDiskDefPtr disk = vm->def->disks[i];
+
+ if (disk->src != NULL && STREQ(disk->src, path)) {
+ if (virAsprintf(&ret, "drive-%s", disk->info.alias) < 0)
{
+ virReportOOMError();
+ return NULL;
+ }
+ break;
+ }
+ }
+
+ if (!ret) {
+ qemuReportError(VIR_ERR_INVALID_ARG,
+ "%s", _("No device found for specified
path"));
+ }
+ return ret;
+}
+
+static int
+qemuDomainBlockPullImpl(virDomainPtr dom, const char *path,
+ virDomainBlockPullInfoPtr info,
+ int mode)
+{
+ struct qemud_driver *driver = dom->conn->privateData;
+ virDomainObjPtr vm = NULL;
+ qemuDomainObjPrivatePtr priv;
+ char uuidstr[VIR_UUID_STRING_BUFLEN];
+ const char *device = NULL;
+ int ret = -1;
+
+ qemuDriverLock(driver);
+ virUUIDFormat(dom->uuid, uuidstr);
+ vm = virDomainFindByUUID(&driver->domains, dom->uuid);
+ if (!vm) {
+ qemuReportError(VIR_ERR_NO_DOMAIN,
+ _("no domain with matching uuid '%s'"),
uuidstr);
+ goto cleanup;
+ }
+
+ if (!virDomainObjIsActive(vm)) {
+ qemuReportError(VIR_ERR_OPERATION_INVALID,
+ "%s", _("domain is not running"));
+ goto cleanup;
+ }
+
+ device = qemuDiskPathToAlias(vm, path);
+ if (!device) {
+ goto cleanup;
+ }
+
+ if (qemuDomainObjBeginJobWithDriver(driver, vm) < 0)
+ goto cleanup;
+ qemuDomainObjEnterMonitorWithDriver(driver, vm);
+ priv = vm->privateData;
+ ret = qemuMonitorBlockPull(priv->mon, device, info, mode);
+ qemuDomainObjExitMonitorWithDriver(driver, vm);
+ if (qemuDomainObjEndJob(vm) == 0) {
+ vm = NULL;
+ goto cleanup;
+ }
+
+cleanup:
+ VIR_FREE(device);
+ if (vm)
+ virDomainObjUnlock(vm);
+ qemuDriverUnlock(driver);
+ return ret;
+}
+
+static int
+qemuDomainBlockPull(virDomainPtr dom, const char *path,
+ virDomainBlockPullInfoPtr info, unsigned int flags)
+{
+ virCheckFlags(0, -1);
+ return qemuDomainBlockPullImpl(dom, path, info, BLOCK_PULL_MODE_ONE);
+}
+
+static int
+qemuDomainBlockPullAll(virDomainPtr dom, const char *path, unsigned int flags)
+{
+ virCheckFlags(0, -1);
+ return qemuDomainBlockPullImpl(dom, path, NULL, BLOCK_PULL_MODE_ALL);
+}
+
+static int
+qemuDomainBlockPullAbort(virDomainPtr dom, const char *path, unsigned int flags)
+{
+ virCheckFlags(0, -1);
+ return qemuDomainBlockPullImpl(dom, path, NULL, BLOCK_PULL_MODE_ABORT);
+}
+
+static int
+qemuDomainGetBlockPullInfo(virDomainPtr dom, const char *path,
+ virDomainBlockPullInfoPtr info, unsigned int flags)
+{
+ virCheckFlags(0, -1);
+ return qemuDomainBlockPullImpl(dom, path, info, BLOCK_PULL_MODE_INFO);
+}
static virDriver qemuDriver = {
.no = VIR_DRV_QEMU,
@@ -8092,6 +8196,10 @@ static virDriver qemuDriver = {
.domainMigratePerform3 = qemuDomainMigratePerform3, /* 0.9.2 */
.domainMigrateFinish3 = qemuDomainMigrateFinish3, /* 0.9.2 */
.domainMigrateConfirm3 = qemuDomainMigrateConfirm3, /* 0.9.2 */
+ .domainBlockPull = qemuDomainBlockPull, /* 0.9.2 */
+ .domainBlockPullAll = qemuDomainBlockPullAll, /* 0.9.2 */
+ .domainBlockPullAbort = qemuDomainBlockPullAbort, /* 0.9.2 */
+ .domainGetBlockPullInfo = qemuDomainGetBlockPullInfo, /* 0.9.2 */
};
diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c
index 26bb814..dee354e 100644
--- a/src/qemu/qemu_monitor.c
+++ b/src/qemu/qemu_monitor.c
@@ -2376,3 +2376,19 @@ int qemuMonitorScreendump(qemuMonitorPtr mon,
ret = qemuMonitorTextScreendump(mon, file);
return ret;
}
+
+int qemuMonitorBlockPull(qemuMonitorPtr mon,
+ const char *path,
+ virDomainBlockPullInfoPtr info,
+ int mode)
+{
+ int ret;
+
+ VIR_DEBUG("mon=%p, path=%p, info=%p, mode=%i", mon, path, info, mode);
+
+ if (mon->json)
+ ret = qemuMonitorJSONBlockPull(mon, path, info, mode);
+ else
+ ret = qemuMonitorTextBlockPull(mon, path, info, mode);
+ return ret;
+}
diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h
index 910865b..6fea700 100644
--- a/src/qemu/qemu_monitor.h
+++ b/src/qemu/qemu_monitor.h
@@ -441,6 +441,19 @@ int qemuMonitorInjectNMI(qemuMonitorPtr mon);
int qemuMonitorScreendump(qemuMonitorPtr mon,
const char *file);
+typedef enum {
+ BLOCK_PULL_MODE_ONE = 0,
+ BLOCK_PULL_MODE_ALL = 1,
+ BLOCK_PULL_MODE_ABORT = 2,
+ BLOCK_PULL_MODE_INFO = 3,
+} BLOCK_PULL_MODE;
+
+
+int qemuMonitorBlockPull(qemuMonitorPtr mon,
+ const char *path,
+ virDomainBlockPullInfoPtr info,
+ int mode);
+
/**
* When running two dd process and using <> redirection, we need a
* shell that will not truncate files. These two strings serve that
diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
index 75adf66..d999c7b 100644
--- a/src/qemu/qemu_monitor_json.c
+++ b/src/qemu/qemu_monitor_json.c
@@ -2628,6 +2628,120 @@ int qemuMonitorJSONScreendump(qemuMonitorPtr mon,
cmd = qemuMonitorJSONMakeCommand("screendump",
"s:filename", file,
NULL);
+ if (!cmd)
+ return -1;
+
+ ret = qemuMonitorJSONCommand(mon, cmd, &reply);
+
+ if (ret == 0)
+ ret = qemuMonitorJSONCheckError(cmd, reply);
+
+ virJSONValueFree(cmd);
+ virJSONValueFree(reply);
+ return ret;
+}
+
+static int qemuMonitorJSONGetBlockPullInfoOne(virJSONValuePtr entry,
+ const char *device,
+ virDomainBlockPullInfoPtr info)
+{
+ const char *this_dev;
+
+ if ((this_dev = virJSONValueObjectGetString(entry, "device")) == NULL) {
+ qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("entry was missing 'device'"));
+ return -1;
+ }
+ if (!STREQ(this_dev, device))
+ return -1;
+
+ if (virJSONValueObjectGetNumberUlong(entry, "offset", &info->cur)
< 0) {
+ qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("entry was missing 'offset'"));
+ return -1;
+ }
+
+ if (virJSONValueObjectGetNumberUlong(entry, "len", &info->end) <
0) {
+ qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("entry was missing 'len'"));
+ return -1;
+ }
+ return 0;
+}
+
+/** qemuMonitorJSONGetBlockPullInfo:
+ * Parse Block Pull information.
+ * The reply can be a JSON array of objects or just an object.
+ */
+static int qemuMonitorJSONGetBlockPullInfo(virJSONValuePtr reply,
+ const char *device,
+ virDomainBlockPullInfoPtr info)
+{
+ virJSONValuePtr data;
+ int nr_results, i = 0;
+
+ if (!info)
+ return -1;
+
+ if ((data = virJSONValueObjectGet(reply, "return")) == NULL) {
+ qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("reply was missing block_pull progress
information"));
+ return -1;
+ }
+
+ if (data->type == VIR_JSON_TYPE_OBJECT) {
+ if (qemuMonitorJSONGetBlockPullInfoOne(data, device, info) != 0)
+ goto not_found;
+ else
+ return 0;
+ } else if (data->type != VIR_JSON_TYPE_ARRAY) {
+ qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("urecognized format of block pull information"));
+ return -1;
+ }
+
+ if ((nr_results = virJSONValueArraySize(data)) < 0) {
+ qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("unable to determine array size"));
+ return -1;
+ }
+
+ for (i = 0; i < nr_results; i++) {
+ virJSONValuePtr entry = virJSONValueArrayGet(data, i);
+ if (qemuMonitorJSONGetBlockPullInfoOne(entry, device, info) == 0)
+ return 0;
+ }
+
+not_found:
+ qemuReportError(VIR_ERR_OPERATION_FAILED, "%s",
+ _("No associated information for the specified disk"));
+ return -1;
+}
+
+
+int qemuMonitorJSONBlockPull(qemuMonitorPtr mon,
+ const char *device,
+ virDomainBlockPullInfoPtr info,
+ int mode)
+{
+ int ret = -1;
+ virJSONValuePtr cmd = NULL;
+ virJSONValuePtr reply = NULL;
+ int parse_info = 0;
+
+ if (mode == BLOCK_PULL_MODE_ONE) {
+ cmd = qemuMonitorJSONMakeCommand("block_stream", "s:device",
device, NULL);
+ parse_info = 1;
+ } else if (mode == BLOCK_PULL_MODE_ALL) {
+ cmd = qemuMonitorJSONMakeCommand("block_stream", "s:device",
device,
+ "b:all", 1, NULL);
+ } else if (mode == BLOCK_PULL_MODE_ABORT) {
+ cmd = qemuMonitorJSONMakeCommand("block_stream", "s:device",
device,
+ "b:stop", 1, NULL);
+ } else if (mode == BLOCK_PULL_MODE_INFO) {
+ cmd = qemuMonitorJSONMakeCommand("query-block-stream", NULL);
+ parse_info = 1;
+ }
if (!cmd)
return -1;
@@ -2637,6 +2751,9 @@ int qemuMonitorJSONScreendump(qemuMonitorPtr mon,
if (ret == 0)
ret = qemuMonitorJSONCheckError(cmd, reply);
+ if (ret == 0 && parse_info)
+ ret = qemuMonitorJSONGetBlockPullInfo(reply, device, info);
+
virJSONValueFree(cmd);
virJSONValueFree(reply);
return ret;
diff --git a/src/qemu/qemu_monitor_json.h b/src/qemu/qemu_monitor_json.h
index ec79b03..393d8fc 100644
--- a/src/qemu/qemu_monitor_json.h
+++ b/src/qemu/qemu_monitor_json.h
@@ -217,5 +217,9 @@ int qemuMonitorJSONInjectNMI(qemuMonitorPtr mon);
int qemuMonitorJSONScreendump(qemuMonitorPtr mon,
const char *file);
+int qemuMonitorJSONBlockPull(qemuMonitorPtr mon,
+ const char *device,
+ virDomainBlockPullInfoPtr info,
+ int mode);
#endif /* QEMU_MONITOR_JSON_H */
diff --git a/src/qemu/qemu_monitor_text.c b/src/qemu/qemu_monitor_text.c
index 3b42e7a..0080b32 100644
--- a/src/qemu/qemu_monitor_text.c
+++ b/src/qemu/qemu_monitor_text.c
@@ -2748,3 +2748,148 @@ cleanup:
VIR_FREE(cmd);
return ret;
}
+
+static int qemuMonitorTextParseBlockPullOne(const char *text,
+ const char *device,
+ virDomainBlockPullInfoPtr info,
+ const char **next)
+{
+ virDomainBlockPullInfo tmp;
+ char *p;
+ int mismatch = 0;
+
+ if (next == NULL)
+ return -1;
+ *next = NULL;
+
+ /*
+ * Each active stream will appear on its own line in the following format:
+ * Streaming device <device>: Completed <cur> of <end> bytes
+ */
+ if ((text = STRSKIP(text, "Streaming device ")) == NULL)
+ return -EINVAL;
+
+ if (!STREQLEN(text, device, strlen(device)))
+ mismatch = 1;
+
+ if ((text = strstr(text, ": Completed ")) == NULL)
+ return -EINVAL;
+ text += 11;
+
+ if (virStrToLong_ull (text, &p, 10, &tmp.cur))
+ return -EINVAL;
+ text = p;
+
+ if (!STRPREFIX(text, " of "))
+ return -EINVAL;
+ text += 4;
+
+ if (virStrToLong_ull (text, &p, 10, &tmp.end))
+ return -EINVAL;
+ text = p;
+
+ if (!STRPREFIX(text, " bytes"))
+ return -EINVAL;
+
+ if (mismatch) {
+ *next = STRSKIP(text, "\n");
+ return -EAGAIN;
+ }
+
+ if (info) {
+ info->cur = tmp.cur;
+ info->end = tmp.end;
+ }
+ return 0;
+}
+
+static int qemuMonitorTextParseBlockPull(const char *text,
+ const char *device,
+ virDomainBlockPullInfoPtr info)
+{
+ const char *next = NULL;
+ int ret = 0;
+
+ /* Check error: Device not found */
+ if (strstr(text, "Device '") && strstr(text, "' not
found")) {
+ qemuReportError(VIR_ERR_OPERATION_INVALID, "%s", _("Device not
found"));
+ return -1;
+ }
+
+ /* Check if we have exceeded the number of simultaneous streams */
+ if (strstr(text, "Device '") && strstr(text, "' is in
use")) {
+ qemuReportError(VIR_ERR_OPERATION_FAILED, "%s",
+ _("Another streaming operation is in progress"));
+ return -1;
+ }
+
+ /* Check error: Non-existent stream */
+ if (strstr(text, "No such process") ||
+ strstr(text, "No active stream")) {
+ qemuReportError(VIR_ERR_OPERATION_INVALID, "%s",
+ _("No active stream"));
+ return -1;
+ }
+
+ /* No output indicates success for BlockPullAll and BlockPullAbort */
+ if (STREQ(text, ""))
+ return 0;
+
+ /* Now try to parse lines of block_stream output */
+ do {
+ ret = qemuMonitorTextParseBlockPullOne(text, device, info, &next);
+ text = next;
+ } while (ret == -EAGAIN);
+
+ if (ret != 0) {
+ qemuReportError(VIR_ERR_OPERATION_FAILED, "%s",
+ _("No associated information for the specified
disk"));
+ ret = -1;
+ }
+ return ret;
+}
+
+int qemuMonitorTextBlockPull(qemuMonitorPtr mon,
+ const char *device,
+ virDomainBlockPullInfoPtr info,
+ int mode)
+{
+ char *cmd = NULL;
+ char *reply = NULL;
+ int ret, parse_info = 0;
+
+ if (mode == BLOCK_PULL_MODE_ONE) {
+ ret = virAsprintf(&cmd, "block_stream %s", device);
+ parse_info = 1;
+ } else if (mode == BLOCK_PULL_MODE_ALL) {
+ ret = virAsprintf(&cmd, "block_stream -a %s", device);
+ } else if (mode == BLOCK_PULL_MODE_ABORT) {
+ ret = virAsprintf(&cmd, "block_stream -s %s", device);
+ } else if (mode == BLOCK_PULL_MODE_INFO) {
+ ret = virAsprintf(&cmd, "info block_stream");
+ parse_info = 1;
+ } else {
+ return -1;
+ }
+
+ if (ret < 0) {
+ virReportOOMError();
+ return -1;
+ }
+
+ ret = 0;
+ if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) {
+ qemuReportError(VIR_ERR_INTERNAL_ERROR,
+ "%s", _("cannot run monitor command"));
+ ret = -1;
+ goto cleanup;
+ }
+
+ if (parse_info && (qemuMonitorTextParseBlockPull(reply, device, info) != 0))
+ ret = -1;
+
+cleanup:
+ VIR_FREE(cmd);
+ VIR_FREE(reply);
+ return ret;
+}
diff --git a/src/qemu/qemu_monitor_text.h b/src/qemu/qemu_monitor_text.h
index 8a69105..4fa5064 100644
--- a/src/qemu/qemu_monitor_text.h
+++ b/src/qemu/qemu_monitor_text.h
@@ -210,4 +210,9 @@ int qemuMonitorTextInjectNMI(qemuMonitorPtr mon);
int qemuMonitorTextScreendump(qemuMonitorPtr mon, const char *file);
+int qemuMonitorTextBlockPull(qemuMonitorPtr mon,
+ const char *device,
+ virDomainBlockPullInfoPtr info,
+ int mode);
+
#endif /* QEMU_MONITOR_TEXT_H */
--
1.7.3
1:17 p.m.
New subject: [libvirt] [PATCH 5/8] Enable the virDomainBlockPull API in virsh
Define three new virsh commands:
* blockpull: Perform incremental block pull
* blockpull: Start/stop full device block pull
* blockpullinfo: Retrieve progress info for full device block pull
Share print_job_progress() with the migration code.
* tools/virsh.c: implement the new commands
Signed-off-by: Adam Litke <agl(a)us.ibm.com>
---
tools/virsh.c | 134 +++++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 files changed, 130 insertions(+), 4 deletions(-)
diff --git a/tools/virsh.c b/tools/virsh.c
index d98be1c..15c5b67 100644
--- a/tools/virsh.c
+++ b/tools/virsh.c
@@ -4095,7 +4095,8 @@ out_sig:
}
static void
-print_job_progress(unsigned long long remaining, unsigned long long total)
+print_job_progress(const char *label, unsigned long long remaining,
+ unsigned long long total)
{
int progress;
@@ -4115,7 +4116,7 @@ print_job_progress(unsigned long long remaining, unsigned long long
total)
}
}
- fprintf(stderr, "\rMigration: [%3d %%]", progress);
+ fprintf(stderr, "\r%s: [%3d %%]", label, progress);
}
static bool
@@ -4202,7 +4203,7 @@ repoll:
functionReturn = true;
if (verbose) {
/* print [100 %] */
- print_job_progress(0, 1);
+ print_job_progress("Migration", 0, 1);
}
} else
functionReturn = false;
@@ -4241,7 +4242,8 @@ repoll:
pthread_sigmask(SIG_SETMASK, &oldsigmask, NULL);
#endif
if (ret == 0)
- print_job_progress(jobinfo.dataRemaining, jobinfo.dataTotal);
+ print_job_progress("Migration", jobinfo.dataRemaining,
+ jobinfo.dataTotal);
}
}
@@ -4300,6 +4302,127 @@ done:
return ret;
}
+typedef enum {
+ VSH_CMD_BLOCK_PULL_ONE = 0,
+ VSH_CMD_BLOCK_PULL_ALL = 1,
+ VSH_CMD_BLOCK_PULL_ABORT = 2,
+ VSH_CMD_BLOCK_PULL_INFO = 3
+} VSH_CMD_BLOCK_PULL_MODE;
+
+static int
+blockPullImpl(vshControl *ctl, const vshCmd *cmd,
+ virDomainBlockPullInfoPtr info, int mode)
+{
+ virDomainPtr dom;
+ const char *name, *path;
+ int ret = -1;
+
+ if (!vshConnectionUsability(ctl, ctl->conn))
+ return false;
+
+ if (!(dom = vshCommandOptDomain(ctl, cmd, &name)))
+ return false;
+
+ if (vshCommandOptString(cmd, "path", &path) < 0)
+ return false;
+
+ if (mode == VSH_CMD_BLOCK_PULL_ONE)
+ ret = virDomainBlockPull(dom, path, info, 0);
+ else if (mode == VSH_CMD_BLOCK_PULL_ALL)
+ ret = virDomainBlockPullAll(dom, path, 0);
+ else if (mode == VSH_CMD_BLOCK_PULL_ABORT)
+ ret = virDomainBlockPullAbort(dom, path, 0);
+ else if (mode == VSH_CMD_BLOCK_PULL_INFO)
+ ret = virDomainGetBlockPullInfo(dom, path, info, 0);
+
+ virDomainFree(dom);
+ return ret;
+}
+
+/*
+ * "blockpull" command
+ */
+static const vshCmdInfo info_block_pull[] = {
+ {"help", N_("Iteratively populate a disk from its backing
image.")},
+ {"desc", N_("Iteratively populate a disk from its backing
image.")},
+ {NULL, NULL}
+};
+
+static const vshCmdOptDef opts_block_pull[] = {
+ {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or
uuid")},
+ {"path", VSH_OT_DATA, VSH_OFLAG_REQ, N_("Fully-qualified path of
disk")},
+ {NULL, 0, 0, NULL}
+};
+
+static bool
+cmdBlockPull(vshControl *ctl, const vshCmd *cmd)
+{
+ virDomainBlockPullInfo info;
+
+ if (blockPullImpl(ctl, cmd, &info, VSH_CMD_BLOCK_PULL_ONE) != 0)
+ return false;
+ print_job_progress("Block pull", info.end - info.cur, info.end);
+ return true;
+}
+
+/*
+ * "blockpullall" command
+ */
+static const vshCmdInfo info_block_pull_all[] = {
+ {"help", N_("Start or stop populating a disk from its backing
image.")},
+ {"desc", N_("Start or stop populating a disk from its backing
image.")},
+ {NULL, NULL}
+};
+
+static const vshCmdOptDef opts_block_pull_all[] = {
+ {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or
uuid")},
+ {"path", VSH_OT_DATA, VSH_OFLAG_REQ, N_("Fully-qualified path of
disk")},
+ {"abort", VSH_OT_BOOL, VSH_OFLAG_NONE, N_("Abort the current
operation")},
+ {NULL, 0, 0, NULL}
+};
+
+static bool
+cmdBlockPullAll(vshControl *ctl, const vshCmd *cmd)
+{
+ int mode;
+
+ if (vshCommandOptBool (cmd, "abort"))
+ mode = VSH_CMD_BLOCK_PULL_ABORT;
+ else
+ mode = VSH_CMD_BLOCK_PULL_ALL;
+
+ if (blockPullImpl(ctl, cmd, NULL, mode) != 0)
+ return false;
+ return true;
+}
+
+/*
+ * "blockpullinfo" command
+ */
+static const vshCmdInfo info_block_pull_info[] = {
+ {"help", N_("Check progress of an active block pull
operation.")},
+ {"desc", N_("Check progress of an active block pull
operation.")},
+ {NULL, NULL}
+};
+
+static const vshCmdOptDef opts_block_pull_info[] = {
+ {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or
uuid")},
+ {"path", VSH_OT_DATA, VSH_OFLAG_REQ, N_("Fully-qualified path of
disk")},
+ {NULL, 0, 0, NULL}
+};
+
+static bool
+cmdBlockPullInfo(vshControl *ctl, const vshCmd *cmd)
+{
+ virDomainBlockPullInfo info;
+
+ if (blockPullImpl(ctl, cmd, &info, VSH_CMD_BLOCK_PULL_INFO) != 0)
+ return false;
+ print_job_progress("Block pull", info.end - info.cur, info.end);
+ return true;
+}
+
+
/*
* "net-autostart" command
*/
@@ -11046,6 +11169,9 @@ static const vshCmdDef domManagementCmds[] = {
info_attach_interface, 0},
{"autostart", cmdAutostart, opts_autostart, info_autostart, 0},
{"blkiotune", cmdBlkiotune, opts_blkiotune, info_blkiotune, 0},
+ {"blockpull", cmdBlockPull, opts_block_pull, info_block_pull, 0},
+ {"blockpullall", cmdBlockPullAll, opts_block_pull_all, info_block_pull_all,
0},
+ {"blockpullinfo", cmdBlockPullInfo, opts_block_pull_info,
info_block_pull_info, 0},
#ifndef WIN32
{"console", cmdConsole, opts_console, info_console, 0},
#endif
--
1.7.3
1:18 p.m.
New subject: [libvirt] [PATCH 6/8] Enable virDomainBlockPull in the python API.
virDomainBlockPullAll and virDomainBlockPullAbort are handled automatically.
virDomainBlockPull and virDomainBlockPullInfo require manual overrides since
they return a custom type.
* python/generator.py: reenable bindings for this entry point
* python/libvirt-override-api.xml python/libvirt-override.c:
manual overrides
Signed-off-by: Adam Litke <agl(a)us.ibm.com>
---
python/generator.py | 5 +--
python/libvirt-override-api.xml | 14 ++++++++++
python/libvirt-override.c | 53 +++++++++++++++++++++++++++++++++++++++
3 files changed, 69 insertions(+), 3 deletions(-)
diff --git a/python/generator.py b/python/generator.py
index 43e7414..be8419d 100755
--- a/python/generator.py
+++ b/python/generator.py
@@ -178,8 +178,6 @@ def enum(type, name, value):
functions_failed = []
functions_skipped = [
"virConnectListDomains",
- 'virDomainBlockPull',
- 'virDomainGetBlockPullInfo',
]
skipped_modules = {
@@ -194,7 +192,6 @@ skipped_types = {
'virConnectDomainEventIOErrorCallback': "No function types in
python",
'virConnectDomainEventGraphicsCallback': "No function types in
python",
'virEventAddHandleFunc': "No function types in python",
- 'virDomainBlockPullInfoPtr': "Not implemented yet",
}
#######################################################################
@@ -359,6 +356,8 @@ skip_impl = (
'virNodeDeviceListCaps',
'virConnectBaselineCPU',
'virDomainRevertToSnapshot',
+ 'virDomainBlockPull',
+ 'virDomainGetBlockPullInfo',
)
diff --git a/python/libvirt-override-api.xml b/python/libvirt-override-api.xml
index ec08e69..4bdd5de 100644
--- a/python/libvirt-override-api.xml
+++ b/python/libvirt-override-api.xml
@@ -314,5 +314,19 @@
<arg name='flags' type='unsigned int' info='flags, curently
unused'/>
<return type='int' info="0 on success, -1 on error"/>
</function>
+ <function name='virDomainBlockPull' file='python'>
+ <info>Initiate an incremental BlockPull for the given disk</info>
+ <arg name='dom' type='virDomainPtr' info='pointer to the
domain'/>
+ <arg name='path' type='const char *' info='Fully-qualified
filename of disk'/>
+ <arg name='flags' type='unsigned int' info='fine-tuning
flags, currently unused, pass 0.'/>
+ <return type='virDomainBlockPullInfo' info='A dictionary containing
progress information.' />
+ </function>
+ <function name='virDomainGetBlockPullInfo' file='python'>
+ <info>Get progress information for a background BlockPull
operation</info>
+ <arg name='dom' type='virDomainPtr' info='pointer to the
domain'/>
+ <arg name='path' type='const char *' info='Fully-qualified
filename of disk'/>
+ <arg name='flags' type='unsigned int' info='fine-tuning
flags, currently unused, pass 0.'/>
+ <return type='virDomainBlockPullInfo' info='A dictionary containing
progress information.' />
+ </function>
</symbols>
</api>
diff --git a/python/libvirt-override.c b/python/libvirt-override.c
index 763df00..07a55f6 100644
--- a/python/libvirt-override.c
+++ b/python/libvirt-override.c
@@ -2382,6 +2382,57 @@ libvirt_virDomainGetJobInfo(PyObject *self ATTRIBUTE_UNUSED,
PyObject *args) {
return(py_retval);
}
+static PyObject *
+libvirt_virDomainBlockPullImpl(PyObject *self ATTRIBUTE_UNUSED,
+ PyObject *args, int infoOnly) {
+ virDomainPtr domain;
+ PyObject *pyobj_domain;
+ const char *path;
+ unsigned int flags;
+ virDomainBlockPullInfo info;
+ int c_ret;
+ PyObject *ret;
+
+ if (!PyArg_ParseTuple(args, (char *)"Ozi:virDomainStreamDiskInfo",
+ &pyobj_domain, &path, &flags))
+ return(NULL);
+ domain = (virDomainPtr) PyvirDomain_Get(pyobj_domain);
+
+LIBVIRT_BEGIN_ALLOW_THREADS;
+ if (infoOnly)
+ c_ret = virDomainGetBlockPullInfo(domain, path, &info, flags);
+ else
+ c_ret = virDomainBlockPull(domain, path, &info, flags);
+LIBVIRT_END_ALLOW_THREADS;
+
+ if (c_ret == -1)
+ return VIR_PY_NONE;
+
+ if ((ret = PyDict_New()) == NULL)
+ return VIR_PY_NONE;
+
+ PyDict_SetItem(ret, libvirt_constcharPtrWrap("cur"),
+ libvirt_ulonglongWrap(info.cur));
+ PyDict_SetItem(ret, libvirt_constcharPtrWrap("end"),
+ libvirt_ulonglongWrap(info.end));
+
+ return ret;
+}
+
+static PyObject *
+libvirt_virDomainBlockPull(PyObject *self ATTRIBUTE_UNUSED,
+ PyObject *args)
+{
+ return libvirt_virDomainBlockPullImpl(self, args, 0);
+}
+
+static PyObject *
+libvirt_virDomainGetBlockPullInfo(PyObject *self ATTRIBUTE_UNUSED,
+ PyObject *args)
+{
+ return libvirt_virDomainBlockPullImpl(self, args, 1);
+}
+
/*******************************************
* Helper functions to avoid importing modules
@@ -3613,6 +3664,8 @@ static PyMethodDef libvirtMethods[] = {
{(char *) "virDomainGetJobInfo", libvirt_virDomainGetJobInfo, METH_VARARGS,
NULL},
{(char *) "virDomainSnapshotListNames", libvirt_virDomainSnapshotListNames,
METH_VARARGS, NULL},
{(char *) "virDomainRevertToSnapshot", libvirt_virDomainRevertToSnapshot,
METH_VARARGS, NULL},
+ {(char *) "virDomainBlockPull", libvirt_virDomainBlockPull, METH_VARARGS,
NULL},
+ {(char *) "virDomainGetBlockPullInfo", libvirt_virDomainGetBlockPullInfo,
METH_VARARGS, NULL},
{NULL, NULL, 0, NULL}
};
--
1.7.3
1:18 p.m.
New subject: [libvirt] [PATCH 7/8] Asynchronous event for BlockPull completion
When an operation started by virDomainBlockPullAll completes (either with
success or with failure), raise an event to indicate the final status. This
allows an API user to avoid polling on virDomainBlockPullInfo if they would
prefer to use the event mechanism.
* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
from QEMU monitor
Signed-off-by: Adam Litke <agl(a)us.ibm.com>
---
daemon/remote.c | 32 ++++++++++++++++++++
include/libvirt/libvirt.h.in | 27 +++++++++++++++++
python/libvirt-override-virConnect.py | 12 ++++++++
python/libvirt-override.c | 51 +++++++++++++++++++++++++++++++++
src/conf/domain_event.c | 50 ++++++++++++++++++++++++++++++++
src/conf/domain_event.h | 7 ++++-
src/libvirt_private.syms | 2 +
src/qemu/qemu_monitor.c | 12 ++++++++
src/qemu/qemu_monitor.h | 8 +++++
src/qemu/qemu_monitor_json.c | 30 +++++++++++++++++++
src/qemu/qemu_process.c | 28 ++++++++++++++++++
src/remote/remote_driver.c | 30 +++++++++++++++++++
src/remote/remote_protocol.x | 9 +++++-
src/remote_protocol-structs | 5 +++
14 files changed, 301 insertions(+), 2 deletions(-)
diff --git a/daemon/remote.c b/daemon/remote.c
index e0b681c..a8ac276 100644
--- a/daemon/remote.c
+++ b/daemon/remote.c
@@ -396,6 +396,37 @@ static int remoteRelayDomainEventGraphics(virConnectPtr conn
ATTRIBUTE_UNUSED,
return 0;
}
+static int remoteRelayDomainEventBlockPull(virConnectPtr conn ATTRIBUTE_UNUSED,
+ virDomainPtr dom,
+ const char *path,
+ int status,
+ void *opaque)
+{
+ struct qemud_client *client = opaque;
+ remote_domain_event_block_pull_msg data;
+
+ if (!client)
+ return -1;
+
+ VIR_DEBUG("Relaying domain block pull event %s %d %s %i", dom->name,
dom->id, path, status);
+
+ virMutexLock(&client->lock);
+
+ /* build return data */
+ memset(&data, 0, sizeof data);
+ make_nonnull_domain(&data.dom, dom);
+ data.path = (char*)path;
+ data.status = status;
+
+ remoteDispatchDomainEventSend(client,
+ REMOTE_PROC_DOMAIN_EVENT_BLOCK_PULL,
+ (xdrproc_t)xdr_remote_domain_event_block_pull_msg,
&data);
+
+ virMutexUnlock(&client->lock);
+
+ return 0;
+}
+
static int remoteRelayDomainEventControlError(virConnectPtr conn ATTRIBUTE_UNUSED,
virDomainPtr dom,
@@ -434,6 +465,7 @@ static virConnectDomainEventGenericCallback domainEventCallbacks[] =
{
VIR_DOMAIN_EVENT_CALLBACK(remoteRelayDomainEventGraphics),
VIR_DOMAIN_EVENT_CALLBACK(remoteRelayDomainEventIOErrorReason),
VIR_DOMAIN_EVENT_CALLBACK(remoteRelayDomainEventControlError),
+ VIR_DOMAIN_EVENT_CALLBACK(remoteRelayDomainEventBlockPull),
};
verify(ARRAY_CARDINALITY(domainEventCallbacks) == VIR_DOMAIN_EVENT_ID_LAST);
diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in
index ba547c1..86b6d69 100644
--- a/include/libvirt/libvirt.h.in
+++ b/include/libvirt/libvirt.h.in
@@ -2470,6 +2470,32 @@ typedef void (*virConnectDomainEventGraphicsCallback)(virConnectPtr
conn,
void *opaque);
/**
+ * virConnectDomainEventBlockPullStatus:
+ *
+ * The final status of a virDomainBlockPullAll() operation
+ */
+typedef enum {
+ VIR_DOMAIN_BLOCK_PULL_COMPLETED = 0,
+ VIR_DOMAIN_BLOCK_PULL_FAILED = 1,
+} virConnectDomainEventBlockPullStatus;
+
+/**
+ * virConnectDomainEventBlockPullCallback:
+ * @conn: connection object
+ * @dom: domain on which the event occurred
+ * @path: fully-qualified filename of the affected disk
+ * @status: final status of the operation (virConnectDomainEventBlockPullStatus)
+ *
+ * The callback signature to use when registering for an event of type
+ * VIR_DOMAIN_EVENT_ID_BLOCK_PULL with virConnectDomainEventRegisterAny()
+ */
+typedef void (*virConnectDomainEventBlockPullCallback)(virConnectPtr conn,
+ virDomainPtr dom,
+ const char *path,
+ int status,
+ void *opaque);
+
+/**
* VIR_DOMAIN_EVENT_CALLBACK:
*
* Used to cast the event specific callback into the generic one
@@ -2487,6 +2513,7 @@ typedef enum {
VIR_DOMAIN_EVENT_ID_GRAPHICS = 5, /* virConnectDomainEventGraphicsCallback */
VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON = 6, /*
virConnectDomainEventIOErrorReasonCallback */
VIR_DOMAIN_EVENT_ID_CONTROL_ERROR = 7, /* virConnectDomainEventGenericCallback */
+ VIR_DOMAIN_EVENT_ID_BLOCK_PULL = 8, /* virConnectDomainEventBlockPullCallback
*/
/*
* NB: this enum value will increase over time as new events are
diff --git a/python/libvirt-override-virConnect.py
b/python/libvirt-override-virConnect.py
index e344303..362be75 100644
--- a/python/libvirt-override-virConnect.py
+++ b/python/libvirt-override-virConnect.py
@@ -124,6 +124,18 @@
except AttributeError:
pass
+ def dispatchDomainEventBlockPullCallback(self, dom, path, status, cbData):
+ """Dispatches events to python user domain blockPull event
callbacks
+ """
+ try:
+ cb = cbData["cb"]
+ opaque = cbData["opaque"]
+
+ cb(self, virDomain(self, _obj=dom), path, status, opaque)
+ return 0
+ except AttributeError:
+ pass
+
def domainEventDeregisterAny(self, callbackID):
"""Removes a Domain Event Callback. De-registering for a
domain callback will disable delivery of this event type """
diff --git a/python/libvirt-override.c b/python/libvirt-override.c
index 07a55f6..d4a5236 100644
--- a/python/libvirt-override.c
+++ b/python/libvirt-override.c
@@ -3476,6 +3476,54 @@ libvirt_virConnectDomainEventGraphicsCallback(virConnectPtr conn
ATTRIBUTE_UNUSE
return ret;
}
+static int
+libvirt_virConnectDomainEventBlockPullCallback(virConnectPtr conn ATTRIBUTE_UNUSED,
+ virDomainPtr dom,
+ const char *path,
+ int status,
+ void *opaque)
+{
+ PyObject *pyobj_cbData = (PyObject*)opaque;
+ PyObject *pyobj_dom;
+ PyObject *pyobj_ret;
+ PyObject *pyobj_conn;
+ PyObject *dictKey;
+ int ret = -1;
+
+ LIBVIRT_ENSURE_THREAD_STATE;
+
+ /* Create a python instance of this virDomainPtr */
+ virDomainRef(dom);
+ pyobj_dom = libvirt_virDomainPtrWrap(dom);
+ Py_INCREF(pyobj_cbData);
+
+ dictKey = libvirt_constcharPtrWrap("conn");
+ pyobj_conn = PyDict_GetItem(pyobj_cbData, dictKey);
+ Py_DECREF(dictKey);
+
+ /* Call the Callback Dispatcher */
+ pyobj_ret = PyObject_CallMethod(pyobj_conn,
+
(char*)"dispatchDomainEventBlockPullCallback",
+ (char*)"OsiO",
+ pyobj_dom, path, status, pyobj_cbData);
+
+ Py_DECREF(pyobj_cbData);
+ Py_DECREF(pyobj_dom);
+
+ if(!pyobj_ret) {
+#if DEBUG_ERROR
+ printf("%s - ret:%p\n", __FUNCTION__, pyobj_ret);
+#endif
+ PyErr_Print();
+ } else {
+ Py_DECREF(pyobj_ret);
+ ret = 0;
+ }
+
+ LIBVIRT_RELEASE_THREAD_STATE;
+ return ret;
+}
+
static PyObject *
libvirt_virConnectDomainEventRegisterAny(ATTRIBUTE_UNUSED PyObject * self,
PyObject * args)
@@ -3534,6 +3582,9 @@ libvirt_virConnectDomainEventRegisterAny(ATTRIBUTE_UNUSED PyObject *
self,
case VIR_DOMAIN_EVENT_ID_CONTROL_ERROR:
cb = VIR_DOMAIN_EVENT_CALLBACK(libvirt_virConnectDomainEventGenericCallback);
break;
+ case VIR_DOMAIN_EVENT_ID_BLOCK_PULL:
+ cb = VIR_DOMAIN_EVENT_CALLBACK(libvirt_virConnectDomainEventBlockPullCallback);
+ break;
}
if (!cb) {
diff --git a/src/conf/domain_event.c b/src/conf/domain_event.c
index fabc1a5..90c2b32 100644
--- a/src/conf/domain_event.c
+++ b/src/conf/domain_event.c
@@ -84,6 +84,10 @@ struct _virDomainEvent {
char *authScheme;
virDomainEventGraphicsSubjectPtr subject;
} graphics;
+ struct {
+ char *path;
+ int status;
+ } blockPull;
} data;
};
@@ -500,6 +504,11 @@ void virDomainEventFree(virDomainEventPtr event)
}
VIR_FREE(event->data.graphics.subject);
}
+ break;
+
+ case VIR_DOMAIN_EVENT_ID_BLOCK_PULL:
+ VIR_FREE(event->data.blockPull.path);
+ break;
}
VIR_FREE(event->dom.name);
@@ -875,6 +884,40 @@ virDomainEventPtr virDomainEventGraphicsNewFromObj(virDomainObjPtr
obj,
return ev;
}
+static virDomainEventPtr
+virDomainEventBlockPullNew(int id, const char *name, unsigned char *uuid,
+ const char *path, int status)
+{
+ virDomainEventPtr ev =
+ virDomainEventNewInternal(VIR_DOMAIN_EVENT_ID_BLOCK_PULL,
+ id, name, uuid);
+
+ if (ev) {
+ if (!(ev->data.blockPull.path = strdup(path))) {
+ virDomainEventFree(ev);
+ return NULL;
+ }
+ ev->data.blockPull.status = status;
+ }
+
+ return ev;
+}
+
+virDomainEventPtr virDomainEventBlockPullNewFromObj(virDomainObjPtr obj,
+ const char *path,
+ int status)
+{
+ return virDomainEventBlockPullNew(obj->def->id, obj->def->name,
+ obj->def->uuid, path, status);
+}
+
+virDomainEventPtr virDomainEventBlockPullNewFromDom(virDomainPtr dom,
+ const char *path,
+ int status)
+{
+ return virDomainEventBlockPullNew(dom->id, dom->name, dom->uuid,
+ path, status);
+}
virDomainEventPtr virDomainEventControlErrorNewFromDom(virDomainPtr dom)
{
@@ -1028,6 +1071,13 @@ void virDomainEventDispatchDefaultFunc(virConnectPtr conn,
cbopaque);
break;
+ case VIR_DOMAIN_EVENT_ID_BLOCK_PULL:
+ ((virConnectDomainEventBlockPullCallback)cb)(conn, dom,
+ event->data.blockPull.path,
+ event->data.blockPull.status,
+ cbopaque);
+ break;
+
default:
VIR_WARN("Unexpected event ID %d", event->eventID);
break;
diff --git a/src/conf/domain_event.h b/src/conf/domain_event.h
index 68dc8a8..a80868b 100644
--- a/src/conf/domain_event.h
+++ b/src/conf/domain_event.h
@@ -170,7 +170,12 @@ virDomainEventPtr virDomainEventGraphicsNewFromObj(virDomainObjPtr
obj,
virDomainEventPtr virDomainEventControlErrorNewFromDom(virDomainPtr dom);
virDomainEventPtr virDomainEventControlErrorNewFromObj(virDomainObjPtr obj);
-
+virDomainEventPtr virDomainEventBlockPullNewFromObj(virDomainObjPtr obj,
+ const char *path,
+ int status);
+virDomainEventPtr virDomainEventBlockPullNewFromDom(virDomainPtr dom,
+ const char *path,
+ int status);
int virDomainEventQueuePush(virDomainEventQueuePtr evtQueue,
virDomainEventPtr event);
diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms
index e6ab870..f7abcc4 100644
--- a/src/libvirt_private.syms
+++ b/src/libvirt_private.syms
@@ -373,6 +373,8 @@ virDomainWatchdogModelTypeToString;
# domain_event.h
+virDomainEventBlockPullNewFromObj;
+virDomainEventBlockPullNewFromDom;
virDomainEventCallbackListAdd;
virDomainEventCallbackListAddID;
virDomainEventCallbackListCount;
diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c
index dee354e..517a2bb 100644
--- a/src/qemu/qemu_monitor.c
+++ b/src/qemu/qemu_monitor.c
@@ -956,6 +956,18 @@ int qemuMonitorEmitGraphics(qemuMonitorPtr mon,
return ret;
}
+int qemuMonitorEmitBlockPull(qemuMonitorPtr mon,
+ const char *diskAlias,
+ int status)
+{
+ int ret = -1;
+ VIR_DEBUG("mon=%p", mon);
+
+ QEMU_MONITOR_CALLBACK(mon, ret, domainBlockPull, mon->vm,
+ diskAlias, status);
+ return ret;
+}
+
int qemuMonitorSetCapabilities(qemuMonitorPtr mon)
diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h
index 6fea700..3bb0269 100644
--- a/src/qemu/qemu_monitor.h
+++ b/src/qemu/qemu_monitor.h
@@ -117,6 +117,10 @@ struct _qemuMonitorCallbacks {
const char *authScheme,
const char *x509dname,
const char *saslUsername);
+ int (*domainBlockPull)(qemuMonitorPtr mon,
+ virDomainObjPtr vm,
+ const char *diskAlias,
+ int status);
};
@@ -179,6 +183,10 @@ int qemuMonitorEmitGraphics(qemuMonitorPtr mon,
const char *authScheme,
const char *x509dname,
const char *saslUsername);
+int qemuMonitorEmitBlockPull(qemuMonitorPtr mon,
+ const char *diskAlias,
+ int status);
+
int qemuMonitorStartCPUs(qemuMonitorPtr mon,
diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
index d999c7b..79a5e18 100644
--- a/src/qemu/qemu_monitor_json.c
+++ b/src/qemu/qemu_monitor_json.c
@@ -56,6 +56,7 @@ static void qemuMonitorJSONHandleIOError(qemuMonitorPtr mon,
virJSONValuePtr dat
static void qemuMonitorJSONHandleVNCConnect(qemuMonitorPtr mon, virJSONValuePtr data);
static void qemuMonitorJSONHandleVNCInitialize(qemuMonitorPtr mon, virJSONValuePtr
data);
static void qemuMonitorJSONHandleVNCDisconnect(qemuMonitorPtr mon, virJSONValuePtr
data);
+static void qemuMonitorJSONHandleBlockPull(qemuMonitorPtr mon, virJSONValuePtr data);
struct {
const char *type;
@@ -71,6 +72,7 @@ struct {
{ "VNC_CONNECTED", qemuMonitorJSONHandleVNCConnect, },
{ "VNC_INITIALIZED", qemuMonitorJSONHandleVNCInitialize, },
{ "VNC_DISCONNECTED", qemuMonitorJSONHandleVNCDisconnect, },
+ { "BLOCK_STREAM_COMPLETED", qemuMonitorJSONHandleBlockPull, },
};
@@ -679,6 +681,34 @@ static void qemuMonitorJSONHandleVNCDisconnect(qemuMonitorPtr mon,
virJSONValueP
qemuMonitorJSONHandleVNC(mon, data, VIR_DOMAIN_EVENT_GRAPHICS_DISCONNECT);
}
+static void qemuMonitorJSONHandleBlockPull(qemuMonitorPtr mon, virJSONValuePtr data)
+{
+ const char *device;
+ unsigned long long offset, len;
+ int status = VIR_DOMAIN_BLOCK_PULL_FAILED;
+
+ if ((device = virJSONValueObjectGetString(data, "device")) == NULL) {
+ VIR_WARN("missing device in disk io error event");
+ goto out;
+ }
+
+ if (virJSONValueObjectGetNumberUlong(data, "offset", &offset) < 0)
{
+ VIR_WARN("missing offset in block pull event");
+ goto out;
+ }
+
+ if (virJSONValueObjectGetNumberUlong(data, "len", &len) < 0) {
+ VIR_WARN("missing len in block pull event");
+ goto out;
+ }
+
+ if (offset != 0 && offset == len)
+ status = VIR_DOMAIN_BLOCK_PULL_COMPLETED;
+
+out:
+ qemuMonitorEmitBlockPull(mon, device, status);
+}
+
int
qemuMonitorJSONHumanCommandWithFd(qemuMonitorPtr mon,
diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
index faeeb99..256cb41 100644
--- a/src/qemu/qemu_process.c
+++ b/src/qemu/qemu_process.c
@@ -561,6 +561,33 @@ qemuProcessHandleIOError(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
return 0;
}
+static int
+qemuProcessHandleBlockPull(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
+ virDomainObjPtr vm,
+ const char *diskAlias,
+ int status)
+{
+ struct qemud_driver *driver = qemu_driver;
+ virDomainEventPtr blockPullEvent = NULL;
+ const char *path;
+ virDomainDiskDefPtr disk;
+
+ virDomainObjLock(vm);
+ disk = qemuProcessFindDomainDiskByAlias(vm, diskAlias);
+
+ if (disk)
+ path = disk->src;
+ else
+ path = "";
+ blockPullEvent = virDomainEventBlockPullNewFromObj(vm, path, status);
+
+ virDomainObjUnlock(vm);
+ qemuDriverLock(driver);
+ qemuDomainEventQueue(driver, blockPullEvent);
+ qemuDriverUnlock(driver);
+
+ return 0;
+}
static int
qemuProcessHandleGraphics(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
@@ -678,6 +705,7 @@ static qemuMonitorCallbacks monitorCallbacks = {
.domainWatchdog = qemuProcessHandleWatchdog,
.domainIOError = qemuProcessHandleIOError,
.domainGraphics = qemuProcessHandleGraphics,
+ .domainBlockPull = qemuProcessHandleBlockPull,
};
static int
diff --git a/src/remote/remote_driver.c b/src/remote/remote_driver.c
index de9359d..4ae507f 100644
--- a/src/remote/remote_driver.c
+++ b/src/remote/remote_driver.c
@@ -3727,6 +3727,32 @@ remoteDomainReadEventIOErrorReason(virConnectPtr conn, XDR *xdr)
return event;
}
+static virDomainEventPtr
+remoteDomainReadEventBlockPull(virConnectPtr conn, XDR *xdr)
+{
+ remote_domain_event_block_pull_msg msg;
+ virDomainPtr dom;
+ virDomainEventPtr event = NULL;
+ memset (&msg, 0, sizeof msg);
+
+ /* unmarshall parameters, and process it*/
+ if (! xdr_remote_domain_event_block_pull_msg(xdr, &msg) ) {
+ remoteError(VIR_ERR_RPC, "%s",
+ _("unable to demarshall block_pull event"));
+ return NULL;
+ }
+
+ dom = get_nonnull_domain(conn,msg.dom);
+ if (!dom)
+ return NULL;
+
+ event = virDomainEventBlockPullNewFromDom(dom, msg.path, msg.status);
+ xdr_free ((xdrproc_t) &xdr_remote_domain_event_block_pull_msg, (char *)
&msg);
+
+ virDomainFree(dom);
+ return event;
+}
+
static virDomainEventPtr
remoteDomainReadEventGraphics(virConnectPtr conn, XDR *xdr)
@@ -5451,6 +5477,10 @@ processCallDispatchMessage(virConnectPtr conn, struct private_data
*priv,
event = remoteDomainReadEventControlError(conn, xdr);
break;
+ case REMOTE_PROC_DOMAIN_EVENT_BLOCK_PULL:
+ event = remoteDomainReadEventBlockPull(conn, xdr);
+ break;
+
default:
VIR_DEBUG("Unexpected event proc %d", hdr->proc);
break;
diff --git a/src/remote/remote_protocol.x b/src/remote/remote_protocol.x
index 33669c2..447687e 100644
--- a/src/remote/remote_protocol.x
+++ b/src/remote/remote_protocol.x
@@ -1865,6 +1865,12 @@ struct remote_domain_event_graphics_msg {
remote_domain_event_graphics_identity
subject<REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX>;
};
+struct remote_domain_event_block_pull_msg {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ int status;
+};
+
struct remote_domain_managed_save_args {
remote_nonnull_domain dom;
unsigned int flags;
@@ -2335,7 +2341,8 @@ enum remote_procedure {
REMOTE_PROC_DOMAIN_BLOCK_PULL = 225, /* skipgen skipgen */
REMOTE_PROC_DOMAIN_BLOCK_PULL_ALL = 226, /* autogen autogen */
REMOTE_PROC_DOMAIN_BLOCK_PULL_ABORT = 227, /* autogen autogen */
- REMOTE_PROC_DOMAIN_GET_BLOCK_PULL_INFO = 228 /* skipgen skipgen */
+ REMOTE_PROC_DOMAIN_GET_BLOCK_PULL_INFO = 228, /* skipgen skipgen */
+ REMOTE_PROC_DOMAIN_EVENT_BLOCK_PULL = 229 /* skipgen skipgen */
/*
* Notice how the entries are grouped in sets of 10 ?
diff --git a/src/remote_protocol-structs b/src/remote_protocol-structs
index 547f6e2..8e5e8d0 100644
--- a/src/remote_protocol-structs
+++ b/src/remote_protocol-structs
@@ -1370,6 +1370,11 @@ struct remote_domain_event_graphics_msg {
remote_domain_event_graphics_identity * subject_val;
} subject;
};
+struct remote_domain_event_block_pull_msg {
+ remote_nonnull_domain dom;
+ remote_nonnull_string path;
+ int status;
+};
struct remote_domain_managed_save_args {
remote_nonnull_domain dom;
u_int flags;
--
1.7.3
1:18 p.m.
New subject: [libvirt] [PATCH 8/8] test: Python Unittests for DomainBlockPull API
*** Please do not consider for merging, example tests only ***
Here are the testcases I am currently running to verify the correctness of this
API. These are continuing to evolve.
Signed-off-by: Adam Litke <agl(a)us.ibm.com>
---
blockPull-test.py | 245 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 245 insertions(+), 0 deletions(-)
create mode 100755 blockPull-test.py
diff --git a/blockPull-test.py b/blockPull-test.py
new file mode 100755
index 0000000..4a48d5a
--- /dev/null
+++ b/blockPull-test.py
@@ -0,0 +1,245 @@
+#!/usr/bin/env python
+
+import sys
+import subprocess
+import time
+import unittest
+import re
+import threading
+import libvirt
+
+qemu_img_bin = "/home/aglitke/src/qemu/qemu-img"
+virsh_bin = "/home/aglitke/src/libvirt/tools/virsh"
+
+dom_xml = """
+<domain type='kvm'>
+ <name>blockPull-test</name>
+ <memory>131072</memory>
+ <currentMemory>131072</currentMemory>
+ <vcpu>1</vcpu>
+ <os>
+ <type arch='x86_64' machine='pc-0.13'>hvm</type>
+ <boot dev='hd'/>
+ </os>
+ <features>
+ <acpi/>
+ <apic/>
+ <pae/>
+ </features>
+ <clock offset='utc'/>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>restart</on_crash>
+ <devices>
+
<emulator>/home/aglitke/src/qemu/x86_64-softmmu/qemu-system-x86_64</emulator>
+ <disk type='file' device='disk'>
+ <driver name='qemu' type='qed'/>
+ <source file='/tmp/disk1.qed' />
+ <target dev='vda' bus='virtio'/>
+ </disk>
+ <disk type='file' device='disk'>
+ <driver name='qemu' type='qed'/>
+ <source file='/tmp/disk2.qed' />
+ <target dev='vdb' bus='virtio'/>
+ </disk>
+ <graphics type='vnc' port='-1' autoport='yes'/>
+ </devices>
+</domain>
+"""
+
+def qemu_img(*args):
+ global qemu_img_bin
+
+ devnull = open('/dev/null', 'r+')
+ return subprocess.call([qemu_img_bin] + list(args), stdin=devnull, stdout=devnull)
+
+def virsh(*args):
+ global virsh_bin
+
+ devnull = open('/dev/null', 'r+')
+ return subprocess.call([virsh_bin] + list(args),
+ stdin=devnull, stdout=devnull, stderr=devnull)
+
+def make_baseimage(name, size_mb):
+ devnull = open('/dev/null', 'r+')
+ return subprocess.call(['dd', 'if=/dev/zero', "of=%s" %
name, 'bs=1M',
+ 'count=%i' % size_mb], stdin=devnull, stdout=devnull,
stderr=devnull)
+
+def has_backing_file(path):
+ global qemu_img_bin
+ p1 = subprocess.Popen([qemu_img_bin, "info", path],
+ stdout=subprocess.PIPE).communicate()[0]
+ matches = re.findall("^backing file:", p1, re.M)
+ if len(matches) > 0:
+ return True
+ return False
+
+class BlockPullTestCase(unittest.TestCase):
+ def _error_handler(self, ctx, error, dummy=None):
+ pass
+
+ def create_disks(self, sparse):
+ self.disks = [ '/tmp/disk1.qed', '/tmp/disk2.qed' ]
+ if sparse:
+ qemu_img('create', '-f', 'raw',
'/tmp/backing1.img', '100M')
+ qemu_img('create', '-f', 'raw',
'/tmp/backing2.img', '100M')
+ else:
+ make_baseimage('/tmp/backing1.img', 100)
+ make_baseimage('/tmp/backing2.img', 100)
+ qemu_img('create', '-f', 'qed', '-o',
'backing_file=/tmp/backing1.img,copy_on_read=on', self.disks[0])
+ qemu_img('create', '-f', 'qed', '-o',
'backing_file=/tmp/backing2.img,copy_on_read=on', self.disks[1])
+
+ def begin(self, sparse=True):
+ global dom_xml
+
+ libvirt.registerErrorHandler(self._error_handler, None)
+ self.create_disks(sparse)
+ self.conn = libvirt.open('qemu:///system')
+ self.dom = self.conn.createXML(dom_xml, 0)
+
+ def end(self):
+ self.dom.destroy()
+ self.conn.close()
+
+class TestBasicErrors(BlockPullTestCase):
+ def setUp(self):
+ self.begin()
+
+ def tearDown(self):
+ self.end()
+
+ def test_bad_path(self):
+ try:
+ self.dom.blockPull('/dev/null', 0)
+ except libvirt.libvirtError, e:
+ self.assertEqual(libvirt.VIR_ERR_INVALID_ARG, e.get_error_code())
+ else:
+ e = self.conn.virConnGetLastError()
+ self.assertEqual(libvirt.VIR_ERR_INVALID_ARG, e[0])
+
+ def test_abort_no_stream(self):
+ try:
+ self.dom.blockPullAbort(self.disks[0], 0)
+ except libvirt.libvirtError, e:
+ self.assertEqual(libvirt.VIR_ERR_INTERNAL_ERROR, e.get_error_code())
+ else:
+ e = self.conn.virConnGetLastError()
+ self.assertEqual(libvirt.VIR_ERR_INTERNAL_ERROR, e[0])
+
+class TestBasicCommands(BlockPullTestCase):
+ def setUp(self):
+ pass
+
+ def tearDown(self):
+ self.end()
+
+ def test_start_stop(self):
+ self.begin(sparse=False)
+ self.dom.blockPullAll(self.disks[0], 0)
+ time.sleep(1)
+ self.assertIsNot(None, self.dom.blockPullInfo(self.disks[0], 0))
+ self.dom.blockPullAbort(self.disks[0], 0)
+ time.sleep(1)
+ self.assertIs(None, self.dom.blockPullInfo(self.disks[0], 0))
+
+ self.dom.blockPull(self.disks[0], 0)
+ info = self.dom.blockPullInfo(self.disks[0], 0)
+ self.assertNotEqual(info['cur'], 0)
+
+ def test_whole_disk(self):
+ self.begin()
+ self.assertTrue(has_backing_file(self.disks[0]))
+ self.dom.blockPullAll(self.disks[0], 0)
+ for i in xrange(1, 5):
+ if self.dom.blockPullInfo(self.disks[0], 0) is None:
+ break
+ time.sleep(1)
+ self.assertFalse(has_backing_file(self.disks[0]))
+
+ def test_incremental(self):
+ self.begin()
+ last_cur = -1
+ while True:
+ info = self.dom.blockPull(self.disks[0], 0)
+ if info is None or info['cur'] == info['end']:
+ break
+ self.assertGreater(info['cur'], last_cur)
+ last_cur = info['cur']
+ self.assertFalse(has_backing_file(self.disks[0]))
+
+class TestEvents(BlockPullTestCase):
+ def eventLoopRun(self):
+ while self.do_events:
+ libvirt.virEventRunDefaultImpl()
+
+ def eventLoopStart(self):
+ libvirt.virEventRegisterDefaultImpl()
+ self.eventLoopThread = threading.Thread(target=self.eventLoopRun,
name="libvirtEventLoop")
+ self.eventLoopThread.setDaemon(True)
+ self.do_events = True
+ self.eventLoopThread.start()
+
+ def eventLoopStop(self):
+ self.do_events = False
+
+ def setUp(self):
+ self.eventLoopStart()
+
+ def tearDown(self):
+ self.end()
+
+ @staticmethod
+ def recordBlockPullEvent(conn, dom, path, status, inst):
+ inst.event = (dom, path, status)
+
+ def test_event_complete(self):
+ self.begin()
+ self.event = None
+ self.conn.domainEventRegisterAny(self.dom,
libvirt.VIR_DOMAIN_EVENT_ID_BLOCK_PULL,
+ TestEvents.recordBlockPullEvent, self)
+ self.dom.blockPullAll(self.disks[0], 0)
+ for i in xrange(1, 5):
+ if self.event is not None:
+ break
+ time.sleep(1)
+ self.eventLoopStop()
+ self.assertIsNot(None, self.event)
+ self.assertFalse(has_backing_file(self.disks[0]))
+ self.assertEqual(self.event[1], self.disks[0])
+ self.assertEqual(self.event[2], libvirt.VIR_DOMAIN_BLOCK_PULL_COMPLETED)
+
+class TestVirsh(BlockPullTestCase):
+ def setUp(self):
+ pass
+
+ def tearDown(self):
+ self.end()
+
+ def test_blockpull(self):
+ self.begin()
+ info1 = self.dom.blockPull(self.disks[0], 0)
+ virsh('blockpull', self.dom.name(), self.disks[0])
+ info2 = self.dom.blockPull(self.disks[0], 0)
+ self.assertGreater(info2['cur'], info1['cur'])
+
+ def test_blockpullall(self):
+ self.begin()
+ virsh('blockpullall', self.dom.name(), self.disks[0])
+ for i in xrange(1, 5):
+ if self.dom.blockPullInfo(self.disks[0], 0) is None:
+ break
+ time.sleep(1)
+ self.assertFalse(has_backing_file(self.disks[0]))
+
+ def test_blockpullabort(self):
+ self.begin(sparse=False)
+ self.dom.blockPullAll(self.disks[0], 0)
+ time.sleep(1)
+ self.assertIsNot(None, self.dom.blockPullInfo(self.disks[0], 0))
+ virsh('blockpullall', self.dom.name(), '--abort', self.disks[0])
+ time.sleep(1)
+ self.assertIs(None, self.dom.blockPullInfo(self.disks[0], 0))
+ self.assertTrue(has_backing_file(self.disks[0]))
+
+if __name__ == '__main__':
+ unittest.main()
--
1.7.3
4911
days inactive
4919
days old
11 comments
2 participants
participants (2)
-
Adam Litke -
Daniel P. Berrange