12:03 a.m.
This patch series is to add support for attach/detaching an <interface>
device. At the same time, add two fixes (1/3 and 3/3)
Chunyan Liu (3):
libxl: add HOSTDEV type in libxlDomainDetachDeviceConfig
libxl: support hotplug of <interface>
libxl: fix return value error Attach|DetachDeviceFlags
.gnulib | 2 +-
src/libxl/libxl_domain.c | 12 ++-
src/libxl/libxl_driver.c | 193 +++++++++++++++++++++++++++++++++++++++++------
3 files changed, 180 insertions(+), 27 deletions(-)
--
1.8.4.5
12:03 a.m.
New subject: [libvirt] [PATCH 1/3] libxl: add HOSTDEV type in libxlDomainDetachDeviceConfig
Missing HOSTDEV type in libxlDomainDetachDeviceConfig. Add it.
Signed-off-by: Chunyan Liu <cyliu(a)suse.com>
---
src/libxl/libxl_driver.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/src/libxl/libxl_driver.c b/src/libxl/libxl_driver.c
index b27581e..5e08bba 100644
--- a/src/libxl/libxl_driver.c
+++ b/src/libxl/libxl_driver.c
@@ -2985,7 +2985,8 @@ static int
libxlDomainDetachDeviceConfig(virDomainDefPtr vmdef, virDomainDeviceDefPtr dev)
{
virDomainDiskDefPtr disk, detach;
- int ret = -1;
+ virDomainHostdevDefPtr hostdev, det_hostdev;
+ int idx;
switch (dev->type) {
case VIR_DOMAIN_DEVICE_DISK:
@@ -2993,18 +2994,30 @@ libxlDomainDetachDeviceConfig(virDomainDefPtr vmdef,
virDomainDeviceDefPtr dev)
if (!(detach = virDomainDiskRemoveByName(vmdef, disk->dst))) {
virReportError(VIR_ERR_INVALID_ARG,
_("no target device %s"), disk->dst);
- break;
+ return -1;
}
virDomainDiskDefFree(detach);
- ret = 0;
break;
+
+ case VIR_DOMAIN_DEVICE_HOSTDEV: {
+ hostdev = dev->data.hostdev;
+ if ((idx = virDomainHostdevFind(vmdef, hostdev, &det_hostdev)) < 0) {
+ virReportError(VIR_ERR_INVALID_ARG, "%s",
+ _("device not present in domain
configuration"));
+ return -1;
+ }
+ virDomainHostdevRemove(vmdef, idx);
+ virDomainHostdevDefFree(det_hostdev);
+ break;
+ }
+
default:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("persistent detach of device is not supported"));
- break;
+ return -1;
}
- return ret;
+ return 0;
}
static int
--
1.8.4.5
12:03 a.m.
New subject: [libvirt] [PATCH 2/3] libxl: support hotplug of <interface>
Add code to support attach/detaching a network device.
Signed-off-by: Chunyan Liu <cyliu(a)suse.com>
---
src/libxl/libxl_domain.c | 12 +++-
src/libxl/libxl_driver.c | 146 ++++++++++++++++++++++++++++++++++++++++++++---
2 files changed, 149 insertions(+), 9 deletions(-)
diff --git a/src/libxl/libxl_domain.c b/src/libxl/libxl_domain.c
index 0c86601..6780e34 100644
--- a/src/libxl/libxl_domain.c
+++ b/src/libxl/libxl_domain.c
@@ -482,8 +482,16 @@ libxlDomainDeviceDefPostParse(virDomainDeviceDefPtr dev,
STRNEQ(def->os.type, "hvm"))
dev->data.chr->targetType = VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_XEN;
- if (dev->type == VIR_DOMAIN_DEVICE_HOSTDEV) {
- virDomainHostdevDefPtr hostdev = dev->data.hostdev;
+ if (dev->type == VIR_DOMAIN_DEVICE_HOSTDEV ||
+ (dev->type == VIR_DOMAIN_DEVICE_NET &&
+ dev->data.net->type == VIR_DOMAIN_NET_TYPE_HOSTDEV)) {
+
+ virDomainHostdevDefPtr hostdev;
+
+ if (dev->type == VIR_DOMAIN_DEVICE_NET)
+ hostdev = &(dev->data.net)->data.hostdev.def;
+ else
+ hostdev = dev->data.hostdev;
/* forbid capabilities mode hostdev in this kind of hypervisor */
if (hostdev->mode == VIR_DOMAIN_HOSTDEV_MODE_CAPABILITIES) {
diff --git a/src/libxl/libxl_driver.c b/src/libxl/libxl_driver.c
index 5e08bba..9cd56b5 100644
--- a/src/libxl/libxl_driver.c
+++ b/src/libxl/libxl_driver.c
@@ -55,6 +55,7 @@
#include "viraccessapicheck.h"
#include "viratomic.h"
#include "virhostdev.h"
+#include "network/bridge_driver.h"
#define VIR_FROM_THIS VIR_FROM_LIBXL
@@ -2674,10 +2675,8 @@ static int
libxlDomainAttachHostDevice(libxlDriverPrivatePtr driver,
libxlDomainObjPrivatePtr priv,
virDomainObjPtr vm,
- virDomainDeviceDefPtr dev)
+ virDomainHostdevDefPtr hostdev)
{
- virDomainHostdevDefPtr hostdev = dev->data.hostdev;
-
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("hostdev mode '%s' not supported"),
@@ -2756,6 +2755,60 @@ libxlDomainDetachDeviceDiskLive(libxlDomainObjPrivatePtr priv,
}
static int
+libxlDomainAttachNetDevice(libxlDriverPrivatePtr driver,
+ libxlDomainObjPrivatePtr priv,
+ virDomainObjPtr vm,
+ virDomainNetDefPtr net)
+{
+ int actualType;
+ libxl_device_nic nic;
+ int ret = -1;
+
+ /* preallocate new slot for device */
+ if (VIR_REALLOC_N(vm->def->nets, vm->def->nnets + 1) < 0)
+ return -1;
+
+ /* If appropriate, grab a physical device from the configured
+ * network's pool of devices, or resolve bridge device name
+ * to the one defined in the network definition.
+ */
+ if (networkAllocateActualDevice(vm->def, net) < 0)
+ return -1;
+
+ actualType = virDomainNetGetActualType(net);
+
+ if (actualType == VIR_DOMAIN_NET_TYPE_HOSTDEV) {
+ /* This is really a "smart hostdev", so it should be attached
+ * as a hostdev (the hostdev code will reach over into the
+ * netdev-specific code as appropriate), then also added to
+ * the nets list (see out:) if successful.
+ */
+ ret = libxlDomainAttachHostDevice(driver, priv, vm,
+ virDomainNetGetActualHostdev(net));
+ goto out;
+ }
+
+ libxl_device_nic_init(&nic);
+ if (libxlMakeNic(vm->def, net, &nic) < 0)
+ goto cleanup;
+
+ if (libxl_device_nic_add(priv->ctx, vm->def->id, &nic, 0)) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("libxenlight failed to attach network device"));
+ goto cleanup;
+ }
+
+ ret = 0;
+
+ cleanup:
+ libxl_device_nic_dispose(&nic);
+ out:
+ if (!ret)
+ vm->def->nets[vm->def->nnets++] = net;
+ return ret;
+}
+
+static int
libxlDomainAttachDeviceLive(libxlDriverPrivatePtr driver,
libxlDomainObjPrivatePtr priv,
virDomainObjPtr vm,
@@ -2770,8 +2823,16 @@ libxlDomainAttachDeviceLive(libxlDriverPrivatePtr driver,
dev->data.disk = NULL;
break;
+ case VIR_DOMAIN_DEVICE_NET:
+ ret = libxlDomainAttachNetDevice(driver, priv, vm,
+ dev->data.net);
+ if (!ret)
+ dev->data.net = NULL;
+ break;
+
case VIR_DOMAIN_DEVICE_HOSTDEV:
- ret = libxlDomainAttachHostDevice(driver, priv, vm, dev);
+ ret = libxlDomainAttachHostDevice(driver, priv, vm,
+ dev->data.hostdev);
if (!ret)
dev->data.hostdev = NULL;
break;
@@ -2790,6 +2851,7 @@ static int
libxlDomainAttachDeviceConfig(virDomainDefPtr vmdef, virDomainDeviceDefPtr dev)
{
virDomainDiskDefPtr disk;
+ virDomainNetDefPtr net;
virDomainHostdevDefPtr hostdev;
virDomainHostdevDefPtr found;
@@ -2806,6 +2868,14 @@ libxlDomainAttachDeviceConfig(virDomainDefPtr vmdef,
virDomainDeviceDefPtr dev)
/* vmdef has the pointer. Generic codes for vmdef will do all jobs */
dev->data.disk = NULL;
break;
+
+ case VIR_DOMAIN_DEVICE_NET:
+ net = dev->data.net;
+ if (virDomainNetInsert(vmdef, net))
+ return -1;
+ dev->data.net = NULL;
+ break;
+
case VIR_DOMAIN_DEVICE_HOSTDEV:
hostdev = dev->data.hostdev;
@@ -2928,9 +2998,8 @@ static int
libxlDomainDetachHostDevice(libxlDriverPrivatePtr driver,
libxlDomainObjPrivatePtr priv,
virDomainObjPtr vm,
- virDomainDeviceDefPtr dev)
+ virDomainHostdevDefPtr hostdev)
{
- virDomainHostdevDefPtr hostdev = dev->data.hostdev;
virDomainHostdevSubsysPtr subsys = &hostdev->source.subsys;
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) {
@@ -2954,6 +3023,53 @@ libxlDomainDetachHostDevice(libxlDriverPrivatePtr driver,
}
static int
+libxlDomainDetachNetDevice(libxlDriverPrivatePtr driver,
+ libxlDomainObjPrivatePtr priv,
+ virDomainObjPtr vm,
+ virDomainNetDefPtr net)
+{
+ int detachidx;
+ virDomainNetDefPtr detach = NULL;
+ libxl_device_nic nic;
+ char mac[VIR_MAC_STRING_BUFLEN];
+ int ret = -1;
+
+ if ((detachidx = virDomainNetFindIdx(vm->def, net)) < 0)
+ return -1;
+
+ detach = vm->def->nets[detachidx];
+
+ if (virDomainNetGetActualType(detach) == VIR_DOMAIN_NET_TYPE_HOSTDEV) {
+ /* This is really a "smart hostdev", so it should be attached as a
+ * hostdev, then also removed from nets list (see out:) if successful.
+ */
+ ret = libxlDomainDetachHostDevice(driver, priv, vm,
+ virDomainNetGetActualHostdev(detach));
+ goto out;
+ }
+
+ libxl_device_nic_init(&nic);
+ if (libxl_mac_to_device_nic(priv->ctx, vm->def->id,
+ virMacAddrFormat(&detach->mac, mac), &nic))
+ goto cleanup;
+
+ if (libxl_device_nic_remove(priv->ctx, vm->def->id, &nic, 0)) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("libxenlight failed to detach network device"));
+ goto cleanup;
+ }
+
+ ret = 0;
+
+ cleanup:
+ libxl_device_nic_dispose(&nic);
+ out:
+ if (!ret)
+ virDomainNetRemove(vm->def, detachidx);
+ return ret;
+}
+
+static int
libxlDomainDetachDeviceLive(libxlDriverPrivatePtr driver,
libxlDomainObjPrivatePtr priv,
virDomainObjPtr vm,
@@ -2966,8 +3082,14 @@ libxlDomainDetachDeviceLive(libxlDriverPrivatePtr driver,
ret = libxlDomainDetachDeviceDiskLive(priv, vm, dev);
break;
+ case VIR_DOMAIN_DEVICE_NET:
+ ret = libxlDomainDetachNetDevice(driver, priv, vm,
+ dev->data.net);
+ break;
+
case VIR_DOMAIN_DEVICE_HOSTDEV:
- ret = libxlDomainDetachHostDevice(driver, priv, vm, dev);
+ ret = libxlDomainDetachHostDevice(driver, priv, vm,
+ dev->data.hostdev);
break;
default:
@@ -2986,6 +3108,7 @@ libxlDomainDetachDeviceConfig(virDomainDefPtr vmdef,
virDomainDeviceDefPtr dev)
{
virDomainDiskDefPtr disk, detach;
virDomainHostdevDefPtr hostdev, det_hostdev;
+ virDomainNetDefPtr net;
int idx;
switch (dev->type) {
@@ -2999,6 +3122,15 @@ libxlDomainDetachDeviceConfig(virDomainDefPtr vmdef,
virDomainDeviceDefPtr dev)
virDomainDiskDefFree(detach);
break;
+ case VIR_DOMAIN_DEVICE_NET:
+ net = dev->data.net;
+ if ((idx = virDomainNetFindIdx(vmdef, net)) < 0)
+ return -1;
+
+ /* this is guaranteed to succeed */
+ virDomainNetDefFree(virDomainNetRemove(vmdef, idx));
+ break;
+
case VIR_DOMAIN_DEVICE_HOSTDEV: {
hostdev = dev->data.hostdev;
if ((idx = virDomainHostdevFind(vmdef, hostdev, &det_hostdev)) < 0) {
--
1.8.4.5
12:03 a.m.
New subject: [libvirt] [PATCH 3/3] libxl: fix return value error Attach|DetachDeviceFlags
Code logic in libxlDomainAttachDeviceFlags and libxlDomainDetachDeviceFlags
is wrong with return value in error cases.
'ret' was being set to 0 if 'flags & VIR_DOMAIN_DEVICE_MODIFY_CONFIG'
was
false. Then if something like virDomainDeviceDefParse() failed in the
VIR_DOMAIN_DEVICE_MODIFY_LIVE logic, the error would be reported but the
function would return success.
Signed-off-by: Chunyan Liu <cyliu(a)suse.com>
---
src/libxl/libxl_driver.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/src/libxl/libxl_driver.c b/src/libxl/libxl_driver.c
index 9cd56b5..5fbff1c 100644
--- a/src/libxl/libxl_driver.c
+++ b/src/libxl/libxl_driver.c
@@ -3285,10 +3285,8 @@ libxlDomainAttachDeviceFlags(virDomainPtr dom, const char *xml,
driver->xmlopt)))
goto endjob;
- if ((ret = libxlDomainAttachDeviceConfig(vmdef, dev)) < 0)
+ if (libxlDomainAttachDeviceConfig(vmdef, dev) < 0)
goto endjob;
- } else {
- ret = 0;
}
if (flags & VIR_DOMAIN_DEVICE_MODIFY_LIVE) {
@@ -3299,7 +3297,7 @@ libxlDomainAttachDeviceFlags(virDomainPtr dom, const char *xml,
VIR_DOMAIN_XML_INACTIVE)))
goto endjob;
- if ((ret = libxlDomainAttachDeviceLive(driver, priv, vm, dev)) < 0)
+ if (libxlDomainAttachDeviceLive(driver, priv, vm, dev) < 0)
goto endjob;
/*
@@ -3307,11 +3305,13 @@ libxlDomainAttachDeviceFlags(virDomainPtr dom, const char *xml,
* changed even if we attach the device failed.
*/
if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0)
- ret = -1;
+ goto endjob;
}
+ ret = 0;
+
/* Finally, if no error until here, we can save config. */
- if (!ret && (flags & VIR_DOMAIN_DEVICE_MODIFY_CONFIG)) {
+ if (flags & VIR_DOMAIN_DEVICE_MODIFY_CONFIG) {
ret = virDomainSaveConfig(cfg->configDir, vmdef);
if (!ret) {
virDomainObjAssignDef(vm, vmdef, false, NULL);
@@ -3396,10 +3396,8 @@ libxlDomainDetachDeviceFlags(virDomainPtr dom, const char *xml,
driver->xmlopt)))
goto endjob;
- if ((ret = libxlDomainDetachDeviceConfig(vmdef, dev)) < 0)
+ if (libxlDomainDetachDeviceConfig(vmdef, dev) < 0)
goto endjob;
- } else {
- ret = 0;
}
if (flags & VIR_DOMAIN_DEVICE_MODIFY_LIVE) {
@@ -3410,7 +3408,7 @@ libxlDomainDetachDeviceFlags(virDomainPtr dom, const char *xml,
VIR_DOMAIN_XML_INACTIVE)))
goto endjob;
- if ((ret = libxlDomainDetachDeviceLive(driver, priv, vm, dev)) < 0)
+ if (libxlDomainDetachDeviceLive(driver, priv, vm, dev) < 0)
goto endjob;
/*
@@ -3418,11 +3416,13 @@ libxlDomainDetachDeviceFlags(virDomainPtr dom, const char *xml,
* changed even if we attach the device failed.
*/
if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0)
- ret = -1;
+ goto endjob;
}
+ ret = 0;
+
/* Finally, if no error until here, we can save config. */
- if (!ret && (flags & VIR_DOMAIN_DEVICE_MODIFY_CONFIG)) {
+ if (flags & VIR_DOMAIN_DEVICE_MODIFY_CONFIG) {
ret = virDomainSaveConfig(cfg->configDir, vmdef);
if (!ret) {
virDomainObjAssignDef(vm, vmdef, false, NULL);
--
1.8.4.5
12:28 p.m.
Chunyan Liu wrote:
This patch series is to add support for attach/detaching an
<interface>
device. At the same time, add two fixes (1/3 and 3/3)
Chunyan Liu (3):
libxl: add HOSTDEV type in libxlDomainDetachDeviceConfig
libxl: support hotplug of <interface>
libxl: fix return value error Attach|DetachDeviceFlags
.gnulib | 2 +-
Odd that your cover letter includes the gnulib bump but patches do not.
Did you use an old cover letter?
Note: Chunyan and I have iterated on this series off-list. We started
looking at an internal bug report, stumbled across further issues, and
this series was the result.
ACK series. I'll push this in a bit.
Regards,
Jim
src/libxl/libxl_domain.c | 12 ++-
src/libxl/libxl_driver.c | 193 +++++++++++++++++++++++++++++++++++++++++------
3 files changed, 180 insertions(+), 27 deletions(-)
3775
days inactive
3775
days old
4 comments
2 participants
participants (2)
-
Chunyan Liu -
Jim Fehlig