5:28 p.m.
This patch intends to add DMI support to libvirt for RISC-V and mips.
This change is based on commit ec6ce6363, which added ARM support.
This is not tested on the target arches, as I've been unable to find
hardware to test this on.
src/util/virsysinfo.c | 2 ++
1 file changed, 2 insertions(+)
Cheers,
Brett Holman
PS: This is my first post on this mailing list. I believe that I've followed
the documented steps, but if I've missed anything please let me know.
5:28 p.m.
New subject: [PATCH] virsysinfo: Try reading DMI table
From: Brett Holman <brett.holman(a)canonical.com>
The SMBIOS specification[1] includes RISC-V and mips, and some systems have
SMBIOS info. Attempt to read dmidecode and fall back to old behavior if that
fails.
[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.4....
Signed-off-by: Brett Holman <brett.holman(a)canonical.com>
---
src/util/virsysinfo.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/src/util/virsysinfo.c b/src/util/virsysinfo.c
index 36a861c53f..d8d660d694 100644
--- a/src/util/virsysinfo.c
+++ b/src/util/virsysinfo.c
@@ -1248,6 +1248,8 @@ virSysinfoRead(void)
#elif !defined(WIN32) && \
(defined(__x86_64__) || \
defined(__i386__) || \
+ defined(__mips__) || \
+ defined(__riscv__) || \
defined(__amd64__))
return virSysinfoReadDMI();
#else /* WIN32 || not supported arch */
--
2.43.0
10:10 a.m.
New subject: [PATCH] virsysinfo: Try reading DMI table
Hello,
On Mon, Mar 18, 2024 at 11:30 PM <brett.holman(a)canonical.com> wrote:
From: Brett Holman <brett.holman(a)canonical.com>
The SMBIOS specification[1] includes RISC-V and mips, and some systems have
SMBIOS info. Attempt to read dmidecode and fall back to old behavior if
that
fails.
[1]
https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.4....
thank you for the patch, but I do not fully understand one thing - in the
pdf you included there is only risc-v as a supported processor architecture
(section 1.1, page 15) and not mips.
As I do not have knowledge in this - did you possibly include mips, because
the newest specification also includes LoongArch?
If yes - could you amend the commit message to include the link to the
newest version [2] and to explain the relationship between mips x
LoongArch?
[2]
https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.7....
Signed-off-by: Brett Holman <brett.holman(a)canonical.com>
---
src/util/virsysinfo.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/src/util/virsysinfo.c b/src/util/virsysinfo.c
index 36a861c53f..d8d660d694 100644
--- a/src/util/virsysinfo.c
+++ b/src/util/virsysinfo.c
@@ -1248,6 +1248,8 @@ virSysinfoRead(void)
#elif !defined(WIN32) && \
(defined(__x86_64__) || \
defined(__i386__) || \
+ defined(__mips__) || \
+ defined(__riscv__) || \
defined(__amd64__))
return virSysinfoReadDMI();
#else /* WIN32 || not supported arch */
--
2.43.0
_______________________________________________
Devel mailing list -- devel(a)lists.libvirt.org
To unsubscribe send an email to devel-leave(a)lists.libvirt.org
Regards,
Kristina
1:36 p.m.
New subject: [PATCH] virsysinfo: Try reading DMI table
As I do not have knowledge in this - did you possibly include mips,
because
the newest specification also includes LoongArch?
If yes - could you amend the commit message to include the link to the
newest version [2] and to explain the relationship between mips x
LoongArch?
Thanks for the review.
Correct, the spec doesn't support mips, but I added it because I noticed the SMBIOS
table definition under hw/mips/ in qemu's source which, as you pointed out, is for
LoongArch. I'll resubmit with an updated commit message.
3:14 p.m.
New subject: [RFC v2] virsysinfo: Try reading DMI table
This patch intends to add DMI support to libvirt for RISC-V and mips.
This change is based on commit ec6ce6363, which added ARM support.
This is not tested on the target arches, as I've been unable to find
hardware to test this on.
src/util/virsysinfo.c | 2 ++
1 file changed, 2 insertions(+)
V1->V2:
1. Clarify commit message
2. Rebase onto recent LoongArch merge.
Cheers,
Brett Holman
3:14 p.m.
New subject: [PATCH] virsysinfo: Try reading DMI table
From: Brett Holman <brett.holman(a)canonical.com>
Add DMI support for risc-v and mips. Attempt to read dmidecode and
fall back to old behavior if that fails.
The SMBIOS specification[1] officially supports both RISC-V and LoongArch.
Some mips-based Loongson-3 processors also have SMBIOS.
[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.7....
Signed-off-by: Brett Holman <brett.holman(a)canonical.com>
---
src/util/virsysinfo.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/src/util/virsysinfo.c b/src/util/virsysinfo.c
index 4a03fc3246..0d9083c891 100644
--- a/src/util/virsysinfo.c
+++ b/src/util/virsysinfo.c
@@ -1249,6 +1249,8 @@ virSysinfoRead(void)
(defined(__x86_64__) || \
defined(__i386__) || \
defined(__amd64__) || \
+ defined(__riscv__) || \
+ defined(__mips__) || \
defined(__loongarch__))
return virSysinfoReadDMI();
#else /* WIN32 || not supported arch */
--
2.43.0
241
days inactive
249
days old
5 comments
2 participants
participants (2)
-
brett.holman＠canonical.com -
Kristina Hanicova