1:07 a.m.
Hi,
Here is what I did when I tried to upgrade the libvirt on my centos5
system to the latest version.
sudo yum install python-devel xen-devel libxml2-devel readline-
devel gnutls-devel
wget ftp://libvirt.org/libvirt/libvirt-0.3.2-1.src.rpm
sudo rpmbuild --rebuild libvirt-0.3.2-1.src.rpm
...
...
RPM build errors:
InstallSourcePackage: Header V3 DSA signature: NOKEY, key ID
de95bc1f
user veillard does not exist - using root
user veillard does not exist - using root
Installed (but unpackaged) file(s) found:
/usr/share/doc/libvirt-0.3.2/html/FAQ.html
/usr/share/doc/libvirt-0.3.2/html/Libxml2-Logo-90x34.gif
/usr/share/doc/libvirt-0.3.2/html/examples.xml
/usr/share/doc/libvirt-0.3.2/html/examples.xsl
/usr/share/doc/libvirt-0.3.2/html/html/book1.html
/usr/share/doc/libvirt-0.3.2/html/html/home.png
/usr/share/doc/libvirt-0.3.2/html/html/index.html
/usr/share/doc/libvirt-0.3.2/html/html/left.png
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-bridge.html
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-conf.html
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-
gnutls_1_0_compat.html
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-lib.html
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-libvirt.html
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-util.html
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-uuid.html
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-virterror.html
/usr/share/doc/libvirt-0.3.2/html/html/right.png
/usr/share/doc/libvirt-0.3.2/html/html/up.png
/usr/share/doc/libvirt-0.3.2/html/info1.c
/usr/share/doc/libvirt-0.3.2/html/libvir.html
/usr/share/doc/libvirt-0.3.2/html/redhat.gif
/usr/share/doc/libvirt-0.3.2/html/suspend.c
/usr/share/doc/libvirt-python-0.3.2/TODO
/usr/share/doc/libvirt-python-0.3.2/examples/basic.py
/usr/share/doc/libvirt-python-0.3.2/examples/create.py
/usr/share/doc/libvirt-python-0.3.2/examples/error.py
/usr/share/doc/libvirt-python-0.3.2/examples/node.py
/usr/share/doc/libvirt-python-0.3.2/examples/uuid.py
I tried to get around this by putting the following in the
~/.rpmmacros file (according to this webpage http://www.rpm.org/
hintskinks/unpackaged/):
_unpackaged_files_terminate_build 0
_missing_doc_files_terminate_build 0
However, that does not seem to help. Any ideas?
Should I just install the binary packages instead of building from
source?
cheers,
mengkuan
4:18 a.m.
Meng Kuan wrote:
Hi,
Here is what I did when I tried to upgrade the libvirt on my centos5
system to the latest version.
sudo yum install python-devel xen-devel libxml2-devel readline-devel
gnutls-devel
wget ftp://libvirt.org/libvirt/libvirt-0.3.2-1.src.rpm
sudo rpmbuild --rebuild libvirt-0.3.2-1.src.rpm
It's best to avoid building RPMs as root. Set up a non-root RPM
buildroot instead. If you have rpmdevtools package installed, then
there should be a command "rpmdev-setuptree" which does this. Otherwise
read these instructions:
http://genetikayos.com/code/repos/rpm-tutorial/trunk/rpm-tutorial.html
...
...
RPM build errors:
InstallSourcePackage: Header V3 DSA signature: NOKEY, key ID de95bc1f
user veillard does not exist - using root
user veillard does not exist - using root
Installed (but unpackaged) file(s) found:
/usr/share/doc/libvirt-0.3.2/html/FAQ.html
/usr/share/doc/libvirt-0.3.2/html/Libxml2-Logo-90x34.gif
/usr/share/doc/libvirt-0.3.2/html/examples.xml
/usr/share/doc/libvirt-0.3.2/html/examples.xsl
/usr/share/doc/libvirt-0.3.2/html/html/book1.html
/usr/share/doc/libvirt-0.3.2/html/html/home.png
/usr/share/doc/libvirt-0.3.2/html/html/index.html
/usr/share/doc/libvirt-0.3.2/html/html/left.png
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-bridge.html
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-conf.html
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-gnutls_1_0_compat.html
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-lib.html
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-libvirt.html
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-util.html
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-uuid.html
/usr/share/doc/libvirt-0.3.2/html/html/libvirt-virterror.html
/usr/share/doc/libvirt-0.3.2/html/html/right.png
/usr/share/doc/libvirt-0.3.2/html/html/up.png
/usr/share/doc/libvirt-0.3.2/html/info1.c
/usr/share/doc/libvirt-0.3.2/html/libvir.html
/usr/share/doc/libvirt-0.3.2/html/redhat.gif
/usr/share/doc/libvirt-0.3.2/html/suspend.c
/usr/share/doc/libvirt-python-0.3.2/TODO
/usr/share/doc/libvirt-python-0.3.2/examples/basic.py
/usr/share/doc/libvirt-python-0.3.2/examples/create.py
/usr/share/doc/libvirt-python-0.3.2/examples/error.py
/usr/share/doc/libvirt-python-0.3.2/examples/node.py
/usr/share/doc/libvirt-python-0.3.2/examples/uuid.py
I think your best bet is to take a look at where it is installing these
files. Find the RPM build root (usually /var/tmp/something) and do:
find /var/tmp/something -type f
The compare that list of files with the one in the spec file.
I tried to get around this by putting the following in the
~/.rpmmacros
file (according to this webpage http://www.rpm.org/hintskinks/unpackaged/):
_unpackaged_files_terminate_build 0
_missing_doc_files_terminate_build 0
However, that does not seem to help. Any ideas?
Should I just install the binary packages instead of building from source?
I must admit that I normally build from CVS, and on RHEL 5 that works
just fine, so I can't see why it would work from Centos.
Rich.
--
Emerging Technologies, Red Hat - http://et.redhat.com/~rjones/
Registered Address: Red Hat UK Ltd, Amberley Place, 107-111 Peascod
Street, Windsor, Berkshire, SL4 1TE, United Kingdom. Registered in
England and Wales under Company Registration No. 03798903
4:54 a.m.
On Mon, Sep 03, 2007 at 10:18:55AM +0100, Richard W.M. Jones wrote:
Meng Kuan wrote:
>Hi,
>
>Here is what I did when I tried to upgrade the libvirt on my centos5
>system to the latest version.
>
> sudo yum install python-devel xen-devel libxml2-devel readline-devel
>gnutls-devel
> wget ftp://libvirt.org/libvirt/libvirt-0.3.2-1.src.rpm
> sudo rpmbuild --rebuild libvirt-0.3.2-1.src.rpm
It's best to avoid building RPMs as root. Set up a non-root RPM
buildroot instead. If you have rpmdevtools package installed, then
there should be a command "rpmdev-setuptree" which does this. Otherwise
read these instructions:
http://genetikayos.com/code/repos/rpm-tutorial/trunk/rpm-tutorial.html
Hum, I always rebuilt the libvirt RPM done for the release under my own
user id without setting up a specific buildroot.
>...
>RPM build errors:
> InstallSourcePackage: Header V3 DSA signature: NOKEY, key ID de95bc1f
> user veillard does not exist - using root
> user veillard does not exist - using root
> Installed (but unpackaged) file(s) found:
> /usr/share/doc/libvirt-0.3.2/html/FAQ.html
> /usr/share/doc/libvirt-0.3.2/html/Libxml2-Logo-90x34.gif
> /usr/share/doc/libvirt-0.3.2/html/examples.xml
> /usr/share/doc/libvirt-0.3.2/html/examples.xsl
> /usr/share/doc/libvirt-0.3.2/html/html/book1.html
> /usr/share/doc/libvirt-0.3.2/html/html/home.png
> /usr/share/doc/libvirt-0.3.2/html/html/index.html
> /usr/share/doc/libvirt-0.3.2/html/html/left.png
> /usr/share/doc/libvirt-0.3.2/html/html/libvirt-bridge.html
> /usr/share/doc/libvirt-0.3.2/html/html/libvirt-conf.html
> /usr/share/doc/libvirt-0.3.2/html/html/libvirt-gnutls_1_0_compat.html
> /usr/share/doc/libvirt-0.3.2/html/html/libvirt-lib.html
> /usr/share/doc/libvirt-0.3.2/html/html/libvirt-libvirt.html
> /usr/share/doc/libvirt-0.3.2/html/html/libvirt-util.html
> /usr/share/doc/libvirt-0.3.2/html/html/libvirt-uuid.html
> /usr/share/doc/libvirt-0.3.2/html/html/libvirt-virterror.html
> /usr/share/doc/libvirt-0.3.2/html/html/right.png
> /usr/share/doc/libvirt-0.3.2/html/html/up.png
> /usr/share/doc/libvirt-0.3.2/html/info1.c
> /usr/share/doc/libvirt-0.3.2/html/libvir.html
> /usr/share/doc/libvirt-0.3.2/html/redhat.gif
> /usr/share/doc/libvirt-0.3.2/html/suspend.c
> /usr/share/doc/libvirt-python-0.3.2/TODO
> /usr/share/doc/libvirt-python-0.3.2/examples/basic.py
> /usr/share/doc/libvirt-python-0.3.2/examples/create.py
> /usr/share/doc/libvirt-python-0.3.2/examples/error.py
> /usr/share/doc/libvirt-python-0.3.2/examples/node.py
> /usr/share/doc/libvirt-python-0.3.2/examples/uuid.py
I think your best bet is to take a look at where it is installing these
files. Find the RPM build root (usually /var/tmp/something) and do:
find /var/tmp/something -type f
The compare that list of files with the one in the spec file.
Hum this all build fine here with
paphio:~/libvirt -> rpm -q rpm rpm-build
rpm-4.4.2-47.el5
rpm-build-4.4.2-47.el5
and also on the Fedora 7 and 8 build systems, very strange.
>I tried to get around this by putting the following in the
~/.rpmmacros
>file (according to this webpage http://www.rpm.org/hintskinks/unpackaged/):
>
> _unpackaged_files_terminate_build 0
> _missing_doc_files_terminate_build 0
>
>However, that does not seem to help. Any ideas?
>
>Should I just install the binary packages instead of building from source?
I must admit that I normally build from CVS, and on RHEL 5 that works
just fine, so I can't see why it would work from Centos.
For building from CVS, there is a 'make rpm' command which works fine
at least in my environment.
Daniel
--
Red Hat Virtualization group http://redhat.com/virtualization/
Daniel Veillard | virtualization library http://libvirt.org/
veillard(a)redhat.com | libxml GNOME XML XSLT toolkit http://xmlsoft.org/
http://veillard.com/ | Rpmfind RPM search engine http://rpmfind.net/
2:13 p.m.
On Mon, Sep 03, 2007 at 02:07:33PM +0800, Meng Kuan wrote:
Hi,
Here is what I did when I tried to upgrade the libvirt on my centos5
system to the latest version.
sudo yum install python-devel xen-devel libxml2-devel readline-
devel gnutls-devel
wget ftp://libvirt.org/libvirt/libvirt-0.3.2-1.src.rpm
sudo rpmbuild --rebuild libvirt-0.3.2-1.src.rpm
Make sure you have 'redhat-rpm-config' installed too - its a standard part
of the build roots for all RHEL packages & defines alot of RPM macros to
change build of various aspects of the build. If that wasn't present you
can get all sorts of utterly bizzarre errors.
Also, *never* build RPMs as root. It is a perfect way to completely and
utterly trash your system.
As non root create $HOME/.rpmmacros
%_topdir /home/myusername/rpm
And then create
mkdir $HOME/rpm
mkdir $HOME/rpm/{RPMS,SRPMS,SOURCES,SPECS,BUILD}
mkdir $HOME/rpm/RPMS/{noarch,i386,i686,x86_64}
I tried to get around this by putting the following in the
~/.rpmmacros file (according to this webpage http://www.rpm.org/
hintskinks/unpackaged/):
You are build as root - so a $HOME/.rpmmacros file isn't going to have any
effect
Dan.
--
|=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=|
|=- Perl modules: http://search.cpan.org/~danberr/ -=|
|=- Projects: http://freshmeat.net/~danielpb/ -=|
|=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|
6:17 a.m.
I've installed a fresh CentOS 5.0 (x86-64) and did:
(1) Create ~/.rpmmacros & ~/rpm directory structure as described in
Dan's email.
(2) yum install rpm-build rpm-devel python-devel xen-devel \
libxml2-devel readline-devel ncurses-devel gnutls-devel \
gcc
(3) wget ftp://libvirt.org/libvirt/libvirt-0.3.2-1.src.rpm
(4) rpm -i libvirt-0.3.2-1.src.rpm [NB: NOT as root]
(5) cd ~/rpm/SPECS; rpmbuild -ba libvirt.spec [NB: also NOT as root]
and it rpmbuilds just fine. So I suspect that your problem was because
you were trying to rpmbuild as root, which as mentioned before is
dangerous anyway.
Rich.
--
Emerging Technologies, Red Hat - http://et.redhat.com/~rjones/
Registered Address: Red Hat UK Ltd, Amberley Place, 107-111 Peascod
Street, Windsor, Berkshire, SL4 1TE, United Kingdom. Registered in
England and Wales under Company Registration No. 03798903
1:49 a.m.
On 04 Sep 2007, at 7:17 PM, Richard W.M. Jones wrote:
I've installed a fresh CentOS 5.0 (x86-64) and did:
(1) Create ~/.rpmmacros & ~/rpm directory structure as described in
Dan's email.
(2) yum install rpm-build rpm-devel python-devel xen-devel \
libxml2-devel readline-devel ncurses-devel gnutls-devel \
gcc
(3) wget ftp://libvirt.org/libvirt/libvirt-0.3.2-1.src.rpm
(4) rpm -i libvirt-0.3.2-1.src.rpm [NB: NOT as root]
(5) cd ~/rpm/SPECS; rpmbuild -ba libvirt.spec [NB: also NOT as root]
and it rpmbuilds just fine. So I suspect that your problem was
because you were trying to rpmbuild as root, which as mentioned
before is dangerous anyway.
The rpm builds properly now. The system I am using is a test server
so when the first rpmbuild command failed saying it don't have access
to the /usr/src/redhat/SRC directory I simply used sudo instead. My
bad. Now I know what is the proper way of compiling rpms and I hope
this info helps some other rpm newbie as well.
Many thanks to all for your help!
cheers,
mengkuan
6318
days inactive
6320
days old
5 comments
4 participants
participants (4)
-
Daniel P. Berrange -
Daniel Veillard -
Meng Kuan -
Richard W.M. Jones