From: Peter Krempa <pkrempa(a)redhat.com&gt; Use the short unit for kibibytes instead of the confusing or plainly wrong units. Closes: https://gitlab.com/libvirt/libvirt/-/issues/594 Signed-off-by: Peter Krempa <pkrempa(a)redhat.com&gt; --- docs/formatdomain.rst | 4 ++-- docs/formatnetwork.rst | 4 ++-- docs/manpages/virsh.rst | 6 +++--- include/libvirt/libvirt-domain.h | 12 ++++++------ src/libvirt-domain.c | 12 ++++++------ 5 files changed, 19 insertions(+), 19 deletions(-) diff --git a/docs/formatdomain.rst b/docs/formatdomain.rst index 8753ee9c23..82606ef35f 100644 --- a/docs/formatdomain.rst +++ b/docs/formatdomain.rst @@ -1139,7 +1139,7 @@ influence how virtual memory pages are backed by host pages. element is introduced. It has one compulsory attribute ``size`` which specifies which hugepages should be used (especially useful on systems supporting hugepages of different sizes). The default unit for the ``size`` - attribute is kilobytes (multiplier of 1024). If you want to use different + attribute is kiB (multiplier of 1024). If you want to use different unit, use optional ``unit`` attribute. For systems with NUMA, the optional ``nodeset`` attribute may come handy as it ties given guest's NUMA nodes to certain hugepage sizes. From the example snippet, one gigabyte hugepages are @@ -4298,7 +4298,7 @@ attribute are - ``pcie-to-pci-bridge`` ( :since:`since 4.3.0` ) The root controllers (``pci-root`` and ``pcie-root``) have an optional -``pcihole64`` element specifying how big (in kilobytes, or in the unit specified +``pcihole64`` element specifying how big (in kiB, or in the unit specified by ``pcihole64``'s ``unit`` attribute) the 64-bit PCI hole should be. Some guests (like Windows XP or Windows Server 2003) might crash when QEMU and Seabios are recent enough to support 64-bit PCI holes, unless this is disabled diff --git a/docs/formatnetwork.rst b/docs/formatnetwork.rst index 053fe6ad56..6694a145af 100644 --- a/docs/formatnetwork.rst +++ b/docs/formatnetwork.rst @@ -468,10 +468,10 @@ follows, where accepted values for each attribute is an integer number. ``average`` Specifies the desired average bit rate for the interface being shaped (in - kilobytes/second). + kiB/second). ``peak`` Optional attribute which specifies the maximum rate at which the bridge can - send data (in kilobytes/second). Note the limitation of implementation: this + send data (in kiB/second). Note the limitation of implementation: this attribute in the ``outbound`` element is ignored (as Linux ingress filters don't know it yet). ``burst`` diff --git a/docs/manpages/virsh.rst b/docs/manpages/virsh.rst index 3a00778467..895a905b08 100644 --- a/docs/manpages/virsh.rst +++ b/docs/manpages/virsh.rst @@ -2274,7 +2274,7 @@ If no *--inbound* or *--outbound* is specified, this command will query and show the bandwidth settings. Otherwise, it will set the inbound or outbound bandwidth. *average,peak,burst,floor* is the same as in command *attach-interface*. Values for *average*, *peak* and *floor* -are expressed in kilobytes per second, while *burst* is expressed in kilobytes +are expressed in kiB per second, while *burst* is expressed in kiB in a single burst at *peak* speed as described in the Network XML documentation at `https://libvirt.org/formatnetwork.html#quality-of-service <https://libvirt.org/formatnetwork.html#quality-of-service>`__. @@ -5261,8 +5261,8 @@ interface. At least one from the *average*, *floor* pair must be specified. The other two *peak* and *burst* are optional, so "average,peak", "average,,burst", "average,,,floor", "average" and ",,,floor" are also legal. Values for *average*, *floor* and *peak* -are expressed in kilobytes per second, while *burst* is expressed in -kilobytes in a single burst at *peak* speed as described in the +are expressed in kiB per second, while *burst* is expressed in +kiB in a single burst at *peak* speed as described in the Network XML documentation at `https://libvirt.org/formatnetwork.html#quality-of-service <https://libvirt.org/formatnetwork.html#quality-of-service>`__. diff --git a/include/libvirt/libvirt-domain.h b/include/libvirt/libvirt-domain.h index 9496631bcc..ac5daf7d0c 100644 --- a/include/libvirt/libvirt-domain.h +++ b/include/libvirt/libvirt-domain.h @@ -715,9 +715,9 @@ typedef virDomainInterfaceStatsStruct *virDomainInterfaceStatsPtr; * Since: 0.7.5 */ typedef enum { - /* The total amount of data read from swap space (in kB). (Since: 0.7.5) */ + /* The total amount of data read from swap space (in kiB). (Since: 0.7.5) */ VIR_DOMAIN_MEMORY_STAT_SWAP_IN = 0, - /* The total amount of memory written out to swap space (in kB). (Since: 0.7.5) */ + /* The total amount of memory written out to swap space (in kiB). (Since: 0.7.5) */ VIR_DOMAIN_MEMORY_STAT_SWAP_OUT = 1, /* @@ -738,7 +738,7 @@ typedef enum { /* * The amount of memory left completely unused by the system. Memory that * is available but used for reclaimable caches should NOT be reported as - * free. This value is expressed in kB. + * free. This value is expressed in kiB. * * Since: 0.7.5 */ @@ -748,7 +748,7 @@ typedef enum { * The total amount of usable memory as seen by the domain. This value * may be less than the amount of memory assigned to the domain if a * balloon driver is in use or if the guest OS does not initialize all - * assigned pages. This value is expressed in kB. + * assigned pages. This value is expressed in kiB. * * Since: 0.7.5 */ @@ -762,7 +762,7 @@ typedef enum { VIR_DOMAIN_MEMORY_STAT_ACTUAL_BALLOON = 6, /* Resident Set Size of the process running the domain. This value - * is in kB + * is in kiB * * Since: 0.9.10 */ @@ -785,7 +785,7 @@ typedef enum { /* * The amount of memory, that can be quickly reclaimed without - * additional I/O (in kB). Typically these pages are used for caching files + * additional I/O (in kiB). Typically these pages are used for caching files * from disk. * * Since: 4.6.0 diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c index 93e8f5b853..ca110bdf85 100644 --- a/src/libvirt-domain.c +++ b/src/libvirt-domain.c @@ -6284,27 +6284,27 @@ virDomainGetInterfaceParameters(virDomainPtr domain, * Memory Statistics: * * VIR_DOMAIN_MEMORY_STAT_SWAP_IN: - * The total amount of data read from swap space (in kb). + * The total amount of data read from swap space (in kiB). * VIR_DOMAIN_MEMORY_STAT_SWAP_OUT: - * The total amount of memory written out to swap space (in kb). + * The total amount of memory written out to swap space (in kiB). * VIR_DOMAIN_MEMORY_STAT_MAJOR_FAULT: * The number of page faults that required disk IO to service. * VIR_DOMAIN_MEMORY_STAT_MINOR_FAULT: * The number of page faults serviced without disk IO. * VIR_DOMAIN_MEMORY_STAT_UNUSED: - * The amount of memory which is not being used for any purpose (in kb). + * The amount of memory which is not being used for any purpose (in kiB). * VIR_DOMAIN_MEMORY_STAT_AVAILABLE: - * The total amount of memory available to the domain's OS (in kb). + * The total amount of memory available to the domain's OS (in kiB). * VIR_DOMAIN_MEMORY_STAT_USABLE: * How much the balloon can be inflated without pushing the guest system * to swap, corresponds to 'Available' in /proc/meminfo * VIR_DOMAIN_MEMORY_STAT_ACTUAL_BALLOON: - * Current balloon value (in kb). + * Current balloon value (in kiB). * VIR_DOMAIN_MEMORY_STAT_LAST_UPDATE * Timestamp of the last statistic * VIR_DOMAIN_MEMORY_STAT_DISK_CACHES * Memory that can be reclaimed without additional I/O, typically disk - * caches (in kb). + * caches (in kiB). * VIR_DOMAIN_MEMORY_STAT_HUGETLB_PGALLOC * The number of successful huge page allocations from inside the domain * VIR_DOMAIN_MEMORY_STAT_HUGETLB_PGFAIL -- 2.49.0