6:31 a.m.
See 2/2 for explanation.
Michal Prívozník (2):
selinux: Swap two blocks handling setfilecon_raw() failure
selinux: Don't ignore ENOENT in Permissive mode
src/security/security_selinux.c | 32 +++++++++++++++++---------------
1 file changed, 17 insertions(+), 15 deletions(-)
--
2.32.0
6:31 a.m.
New subject: [PATCH 1/2] selinux: Swap two blocks handling setfilecon_raw() failure
In virSecuritySELinuxSetFileconImpl() we have code that handles
setfilecon_raw() failure. The code consists of two blocks: one
for dealing with shared filesystem like NFS (errno is ENOTSUP or
EROFS) and the other block that's dealing with EPERM for
privileged daemon. Well, the order of these two blocks is a bit
confusing because the comment above them mentions the NFS case
but EPERM block follows. Swap these two blocks to make it less
confusing.
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
src/security/security_selinux.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/src/security/security_selinux.c b/src/security/security_selinux.c
index 0e5ea0366d..050acee2b0 100644
--- a/src/security/security_selinux.c
+++ b/src/security/security_selinux.c
@@ -1264,22 +1264,9 @@ virSecuritySELinuxSetFileconImpl(const char *path,
* boolean tunables to allow it ...
*/
VIR_WARNINGS_NO_WLOGICALOP_EQUAL_EXPR
- if (setfilecon_errno != EOPNOTSUPP && setfilecon_errno != ENOTSUP
&&
- setfilecon_errno != EROFS) {
+ if (setfilecon_errno == EOPNOTSUPP || setfilecon_errno == ENOTSUP ||
+ setfilecon_errno == EROFS) {
VIR_WARNINGS_RESET
- /* However, don't claim error if SELinux is in Enforcing mode and
- * we are running as unprivileged user and we really did see EPERM.
- * Otherwise we want to return error if SELinux is Enforcing. */
- if (security_getenforce() == 1 &&
- (setfilecon_errno != EPERM || privileged)) {
- virReportSystemError(setfilecon_errno,
- _("unable to set security context '%s'
on '%s'"),
- tcon, path);
- return -1;
- }
- VIR_WARN("unable to set security context '%s' on '%s'
(errno %d)",
- tcon, path, setfilecon_errno);
- } else {
const char *msg;
if (virFileIsSharedFSType(path, VIR_FILE_SHFS_NFS) == 1 &&
security_get_boolean_active("virt_use_nfs") != 1) {
@@ -1293,6 +1280,19 @@ virSecuritySELinuxSetFileconImpl(const char *path,
VIR_INFO("Setting security context '%s' on '%s' not
supported",
tcon, path);
}
+ } else {
+ /* However, don't claim error if SELinux is in Enforcing mode and
+ * we are running as unprivileged user and we really did see EPERM.
+ * Otherwise we want to return error if SELinux is Enforcing. */
+ if (security_getenforce() == 1 &&
+ (setfilecon_errno != EPERM || privileged)) {
+ virReportSystemError(setfilecon_errno,
+ _("unable to set security context '%s'
on '%s'"),
+ tcon, path);
+ return -1;
+ }
+ VIR_WARN("unable to set security context '%s' on '%s'
(errno %d)",
+ tcon, path, setfilecon_errno);
}
return 1;
--
2.32.0
6:31 a.m.
New subject: [PATCH 2/2] selinux: Don't ignore ENOENT in Permissive mode
In selinux driver there's virSecuritySELinuxSetFileconImpl()
which is responsible for actual setting of SELinux label on given
file and handling possible failures. In fhe failure handling code
we decide whether failure is fatal or not. But there is a bug:
depending on SELinux mode (Permissive vs. Enforcing) the ENOENT
is either ignored or considered fatal. This not correct - ENOENT
must always be fatal - QEMU will fail opening it anyways.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2004850
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
src/security/security_selinux.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/src/security/security_selinux.c b/src/security/security_selinux.c
index 050acee2b0..7e8c4fb4f2 100644
--- a/src/security/security_selinux.c
+++ b/src/security/security_selinux.c
@@ -1283,9 +1283,11 @@ virSecuritySELinuxSetFileconImpl(const char *path,
} else {
/* However, don't claim error if SELinux is in Enforcing mode and
* we are running as unprivileged user and we really did see EPERM.
- * Otherwise we want to return error if SELinux is Enforcing. */
- if (security_getenforce() == 1 &&
- (setfilecon_errno != EPERM || privileged)) {
+ * Otherwise we want to return error if SELinux is Enforcing, or we
+ * saw EPERM regardless of SELinux mode. */
+ if (setfilecon_errno == ENOENT ||
+ (security_getenforce() == 1 &&
+ (setfilecon_errno != EPERM || privileged))) {
virReportSystemError(setfilecon_errno,
_("unable to set security context '%s'
on '%s'"),
tcon, path);
--
2.32.0
10:57 a.m.
New subject: [PATCH 2/2] selinux: Don't ignore ENOENT in Permissive mode
On a Monday in 2021, Michal Privoznik wrote:
In selinux driver there's virSecuritySELinuxSetFileconImpl()
which is responsible for actual setting of SELinux label on given
file and handling possible failures. In fhe failure handling code
we decide whether failure is fatal or not. But there is a bug:
depending on SELinux mode (Permissive vs. Enforcing) the ENOENT
is either ignored or considered fatal.
This not correct - ENOENT
must always be fatal - QEMU will fail opening it anyways.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2004850
It won't get as far as trying to start QEMU. The error message in the linked bug:
error: unable to stat: /var/lib/libvirt/images/slic.dat: No such file or directory
comes from the DAC driver.
IIUC in virSecurityStackTransactionCommit we happily commit the SELinux
changes, fail to commit the DAC changes, but the rollback calling
virSecurityManagerTransactionAbort does nothing.
And since qemuSecuritySetAllLabel does not complete successfully, qemuProcessLaunch
does not ask its callers to restore the labels.
Jano
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
src/security/security_selinux.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
3:44 a.m.
New subject: [PATCH 2/2] selinux: Don't ignore ENOENT in Permissive mode
On 9/20/21 5:57 PM, Ján Tomko wrote:
On a Monday in 2021, Michal Privoznik wrote:
> In selinux driver there's virSecuritySELinuxSetFileconImpl()
> which is responsible for actual setting of SELinux label on given
> file and handling possible failures. In fhe failure handling code
> we decide whether failure is fatal or not. But there is a bug:
> depending on SELinux mode (Permissive vs. Enforcing) the ENOENT
> is either ignored or considered fatal.
> This not correct - ENOENT
> must always be fatal - QEMU will fail opening it anyways.
>
> Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2004850
It won't get as far as trying to start QEMU. The error message in the
linked bug:
error: unable to stat: /var/lib/libvirt/images/slic.dat: No such file
or directory
comes from the DAC driver.
Correct. I should have rephrased that.
IIUC in virSecurityStackTransactionCommit we happily commit the SELinux
changes, fail to commit the DAC changes, but the rollback calling
virSecurityManagerTransactionAbort does nothing.
Indeed.
And since qemuSecuritySetAllLabel does not complete successfully,
qemuProcessLaunch
does not ask its callers to restore the labels.
Yes.
Michal
1158
days inactive
1159
days old
4 comments
3 participants
participants (3)
-
Ján Tomko -
Michal Privoznik -
Michal Prívozník