7:28 a.m.
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
v6:
- rebase on mastr
- drop the commit [PATCH v5 1/9] in this patchset, post an extra
commit if needed in the future.
Please review, thanks !
Regards
Yong
v5:
- [PATCH v5 9/9]: Fix alignment error in qemuDomainGetStatsDirtyRate.
v4:
- Rebase the master
- [PATCH v4 1/9]: Refactor dirty page rate calculation status
implementation, display calc_status as string when
'virsh domstats --dirtyrate' api return.
- [PATCH v4 3/9]: Adjust the 'cap check' block before BeginJob().
- [PATCH v4 5/9]: Drop the virDomainDirtyRateCalcMode and introduce
internal enum qemuMonitorDirtyRateCalcMode instead.
- [PATCH v4 6/9]: Code clean.
- [PATCH v4 7/9]: Split qemu_driver logic of domdirtyrate-calc virsh
api into a separate commit.
- [PATCH v4 8/9]: Change the 'mode' parameter usage as --mode=[xxx|yyy],
code clean in qemuDomainStartDirtyRateCalc.
- [PATCH v4 9/9]: Display calc_mode as string and do code clean in
qemuMonitorJSONExtractDirtyRateInfo.
Thanks Michal and Peter for reviewing the previous versions, please review.
Regards
Yong
v3:
- Rebase the master
- [PATCH v2 2/6]: Fix the usage of virQEMUCapsGet
- [PATCH v2 4/6]: Fix the cleanup missed in qemuDomainStartDirtyRateCalc
- [PATCH v2 4/6]: Move all blocks below ACL check
- [PATCH v2 4/6]: Make the qemuMonitorJSONStartDirtyRateCalc cleaner by
merging the different case of qemuMonitorJSONMakeCommand
- [PATCH v2 4/6]: Code clean, make the error message not be line-broken
- [PATCH v2 5/6]: Abstract the enum definition into a standalone commit
- [PATCH v2 5/6]: Move the validations code above calculating flags block
- [PATCH v2 6/6]: Change the type of 'value' field to unsigned in
struct qemuMonitorDirtyRateVcpu
- [PATCH v2 6/6]: Rename the enum type qemuMonitorDirtyRateCalcMode to
virDomainDirtyRateCalcMode
- [PATCH v2 6/6]: Code clean, align the code in qemuDomainGetStatsDirtyRate
Thanks Peter for quick and precise response, please review.
Regards
Yong
v2:
Rebase master and fix confilicts with commit
"Introduce QEMU_CAPS_DEVICE_VIRTIO_MEM_PCI_PREALLOC"
Thanks !
v1:
This patchset introduce mode option as the supplement of
qemuDomainStartDirtyRateCalc api, add calc_mode for dirtyrate
statistics correspondingly.
Qemu add mode parameter for calc-dirty-rate command since >= 6.2.0,
either of these three mode "page-sampling, dirty-bitmap, dirty-ring"
can be specified when calculating dirty page rate.
Page sampling is the original mode and used as default mode.
Dirty bitmap mode use kvm log sync api to fetch the dirty-bitmap
and count the increased 1 bits number during measurement, thus,
calculate the dirty page rate.
Dirty ring mode use the dirty-ring mechanism implemented in Qemu
which can count the increased dirty page on virtual cpu granularity,
thus, calculate the per-vcpu dirty page rate.
These three calculation mode can be used in different scenarios, and
the dirty-bitmap, dirty-ring mode may be more accurate to a certain
degree. So maybe it's time to support the mode option for dirtyrate
calculation.
This series make main modifications as the following:
1. introduce QEMU_CAPS_CALC_DIRTY_RATE capability to probe
calc-dirty-rate command in case of failure since it just
introduced since >= 5.2.0
2. introduce QEMU_CAPS_DIRTYRATE_MODE capability to probe
mode option of calc-dirty-rate command in case of failure, same
as 1.
3. implement mode option support for dirtyrate calculation.
Please review, thanks !
Best Regards !
Hyman Huang(黄勇) (8):
qemu_capabilities: Introduce QEMU_CAPS_CALC_DIRTY_RATE capability
qemu_driver: Probe capability before calculating dirty page rate
qemu_capabilities: Introduce QEMU_CAPS_DIRTYRATE_MODE capability
include: Introduce virDomainDirtyRateCalcFlags
qemu_driver: Add mode parameter to qemuDomainStartDirtyRateCalc
qemu_driver: Extend flags parameter of virDomainStartDirtyRateCalc
virsh: Add mode option to domdirtyrate-calc virsh api
qemu_driver: Add calc_mode for dirtyrate statistics
docs/manpages/virsh.rst | 7 ++-
include/libvirt/libvirt-domain.h | 13 +++++
src/libvirt-domain.c | 18 +++++-
src/qemu/qemu_capabilities.c | 4 ++
src/qemu/qemu_capabilities.h | 2 +
src/qemu/qemu_driver.c | 56 ++++++++++++++++--
src/qemu/qemu_monitor.c | 5 +-
src/qemu/qemu_monitor.h | 27 ++++++++-
src/qemu/qemu_monitor_json.c | 69 ++++++++++++++++++++++-
src/qemu/qemu_monitor_json.h | 3 +-
tests/qemucapabilitiesdata/caps_5.2.0.aarch64.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.ppc64.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.riscv64.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.s390x.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.0.0.aarch64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.0.0.s390x.xml | 1 +
tests/qemucapabilitiesdata/caps_6.0.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.1.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.2.0.aarch64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.2.0.ppc64.xml | 2 +
tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml | 2 +
tests/qemucapabilitiesdata/caps_7.0.0.ppc64.xml | 2 +
tests/qemucapabilitiesdata/caps_7.0.0.x86_64.xml | 2 +
tools/virsh-completer-domain.c | 17 ++++++
tools/virsh-completer-domain.h | 4 ++
tools/virsh-domain.c | 42 +++++++++++++-
tools/virsh-domain.h | 9 +++
28 files changed, 278 insertions(+), 16 deletions(-)
--
1.8.3.1
7:28 a.m.
New subject: [PATCH v6 1/8] qemu_capabilities: Introduce QEMU_CAPS_CALC_DIRTY_RATE capability
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
calc-dirty-rate command was introduced since qemu >=5.2.0.
Introduce QEMU_CAPS_CALC_DIRTY_RATE capability definition.
Signed-off-by: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
---
src/qemu/qemu_capabilities.c | 2 ++
src/qemu/qemu_capabilities.h | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.aarch64.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.ppc64.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.riscv64.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.s390x.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.0.0.aarch64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.0.0.s390x.xml | 1 +
tests/qemucapabilitiesdata/caps_6.0.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.1.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.2.0.aarch64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.2.0.ppc64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_7.0.0.ppc64.xml | 1 +
tests/qemucapabilitiesdata/caps_7.0.0.x86_64.xml | 1 +
16 files changed, 17 insertions(+)
diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c
index 1b28c3f..968185e 100644
--- a/src/qemu/qemu_capabilities.c
+++ b/src/qemu/qemu_capabilities.c
@@ -663,6 +663,7 @@ VIR_ENUM_IMPL(virQEMUCaps,
"device.json+hotplug", /* QEMU_CAPS_DEVICE_JSON */
"hvf", /* QEMU_CAPS_HVF */
"virtio-mem-pci.prealloc", /*
QEMU_CAPS_DEVICE_VIRTIO_MEM_PCI_PREALLOC */
+ "calc-dirty-rate", /* QEMU_CAPS_CALC_DIRTY_RATE */
);
@@ -1229,6 +1230,7 @@ struct virQEMUCapsStringFlags virQEMUCapsCommands[] = {
{ "set-action", QEMU_CAPS_SET_ACTION },
{ "query-dirty-rate", QEMU_CAPS_QUERY_DIRTY_RATE },
{ "sev-inject-launch-secret", QEMU_CAPS_SEV_INJECT_LAUNCH_SECRET },
+ { "calc-dirty-rate", QEMU_CAPS_CALC_DIRTY_RATE },
};
struct virQEMUCapsStringFlags virQEMUCapsMigration[] = {
diff --git a/src/qemu/qemu_capabilities.h b/src/qemu/qemu_capabilities.h
index 6ff0b7a..a295bf0 100644
--- a/src/qemu/qemu_capabilities.h
+++ b/src/qemu/qemu_capabilities.h
@@ -638,6 +638,7 @@ typedef enum { /* virQEMUCapsFlags grouping marker for syntax-check
*/
QEMU_CAPS_DEVICE_JSON, /* -device accepts JSON (and works with hot-unplug) */
QEMU_CAPS_HVF, /* Whether Hypervisor.framework is available */
QEMU_CAPS_DEVICE_VIRTIO_MEM_PCI_PREALLOC, /* -device virtio-mem-pci.prealloc= */
+ QEMU_CAPS_CALC_DIRTY_RATE, /* accepts calc-dirty-rate */
QEMU_CAPS_LAST /* this must always be the last item */
} virQEMUCapsFlags;
diff --git a/tests/qemucapabilitiesdata/caps_5.2.0.aarch64.xml
b/tests/qemucapabilitiesdata/caps_5.2.0.aarch64.xml
index e809b95..9f14d59 100644
--- a/tests/qemucapabilitiesdata/caps_5.2.0.aarch64.xml
+++ b/tests/qemucapabilitiesdata/caps_5.2.0.aarch64.xml
@@ -183,6 +183,7 @@
<flag name='query-display-options'/>
<flag name='virtio-blk.queue-size'/>
<flag name='query-dirty-rate'/>
+ <flag name='calc-dirty-rate'/>
<version>5002000</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>61700243</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_5.2.0.ppc64.xml
b/tests/qemucapabilitiesdata/caps_5.2.0.ppc64.xml
index 0cbbffe..e050514 100644
--- a/tests/qemucapabilitiesdata/caps_5.2.0.ppc64.xml
+++ b/tests/qemucapabilitiesdata/caps_5.2.0.ppc64.xml
@@ -189,6 +189,7 @@
<flag name='query-display-options'/>
<flag name='virtio-blk.queue-size'/>
<flag name='query-dirty-rate'/>
+ <flag name='calc-dirty-rate'/>
<version>5002000</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>42900243</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_5.2.0.riscv64.xml
b/tests/qemucapabilitiesdata/caps_5.2.0.riscv64.xml
index 13a6967..4b123d4 100644
--- a/tests/qemucapabilitiesdata/caps_5.2.0.riscv64.xml
+++ b/tests/qemucapabilitiesdata/caps_5.2.0.riscv64.xml
@@ -173,6 +173,7 @@
<flag name='query-display-options'/>
<flag name='virtio-blk.queue-size'/>
<flag name='query-dirty-rate'/>
+ <flag name='calc-dirty-rate'/>
<version>5002000</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>0</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_5.2.0.s390x.xml
b/tests/qemucapabilitiesdata/caps_5.2.0.s390x.xml
index 518bb7a..bc3c3c3 100644
--- a/tests/qemucapabilitiesdata/caps_5.2.0.s390x.xml
+++ b/tests/qemucapabilitiesdata/caps_5.2.0.s390x.xml
@@ -140,6 +140,7 @@
<flag name='query-display-options'/>
<flag name='virtio-blk.queue-size'/>
<flag name='query-dirty-rate'/>
+ <flag name='calc-dirty-rate'/>
<version>5002000</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>39100243</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_5.2.0.x86_64.xml
b/tests/qemucapabilitiesdata/caps_5.2.0.x86_64.xml
index 64e7bc2..70ad14f 100644
--- a/tests/qemucapabilitiesdata/caps_5.2.0.x86_64.xml
+++ b/tests/qemucapabilitiesdata/caps_5.2.0.x86_64.xml
@@ -225,6 +225,7 @@
<flag name='virtio-mem-pci'/>
<flag name='piix4.acpi-root-pci-hotplug'/>
<flag name='query-dirty-rate'/>
+ <flag name='calc-dirty-rate'/>
<version>5002000</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>43100243</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_6.0.0.aarch64.xml
b/tests/qemucapabilitiesdata/caps_6.0.0.aarch64.xml
index 743f7d9..9d501f2 100644
--- a/tests/qemucapabilitiesdata/caps_6.0.0.aarch64.xml
+++ b/tests/qemucapabilitiesdata/caps_6.0.0.aarch64.xml
@@ -191,6 +191,7 @@
<flag name='set-action'/>
<flag name='virtio-blk.queue-size'/>
<flag name='query-dirty-rate'/>
+ <flag name='calc-dirty-rate'/>
<version>6000000</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>61700242</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_6.0.0.s390x.xml
b/tests/qemucapabilitiesdata/caps_6.0.0.s390x.xml
index b034ffd..02b24f5 100644
--- a/tests/qemucapabilitiesdata/caps_6.0.0.s390x.xml
+++ b/tests/qemucapabilitiesdata/caps_6.0.0.s390x.xml
@@ -148,6 +148,7 @@
<flag name='set-action'/>
<flag name='virtio-blk.queue-size'/>
<flag name='query-dirty-rate'/>
+ <flag name='calc-dirty-rate'/>
<version>6000000</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>39100242</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_6.0.0.x86_64.xml
b/tests/qemucapabilitiesdata/caps_6.0.0.x86_64.xml
index b213abb..8ea688f 100644
--- a/tests/qemucapabilitiesdata/caps_6.0.0.x86_64.xml
+++ b/tests/qemucapabilitiesdata/caps_6.0.0.x86_64.xml
@@ -234,6 +234,7 @@
<flag name='piix4.acpi-root-pci-hotplug'/>
<flag name='query-dirty-rate'/>
<flag name='sev-inject-launch-secret'/>
+ <flag name='calc-dirty-rate'/>
<version>6000000</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>43100242</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_6.1.0.x86_64.xml
b/tests/qemucapabilitiesdata/caps_6.1.0.x86_64.xml
index d9bdcf9..ba1aecc 100644
--- a/tests/qemucapabilitiesdata/caps_6.1.0.x86_64.xml
+++ b/tests/qemucapabilitiesdata/caps_6.1.0.x86_64.xml
@@ -238,6 +238,7 @@
<flag name='query-dirty-rate'/>
<flag name='rbd-encryption'/>
<flag name='sev-inject-launch-secret'/>
+ <flag name='calc-dirty-rate'/>
<version>6001000</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>43100243</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_6.2.0.aarch64.xml
b/tests/qemucapabilitiesdata/caps_6.2.0.aarch64.xml
index f200a7d..17d563e 100644
--- a/tests/qemucapabilitiesdata/caps_6.2.0.aarch64.xml
+++ b/tests/qemucapabilitiesdata/caps_6.2.0.aarch64.xml
@@ -202,6 +202,7 @@
<flag name='memory-backend-file.reserve'/>
<flag name='query-dirty-rate'/>
<flag name='rbd-encryption'/>
+ <flag name='calc-dirty-rate'/>
<version>6001050</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>61700244</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_6.2.0.ppc64.xml
b/tests/qemucapabilitiesdata/caps_6.2.0.ppc64.xml
index ae5c1d3..eaa0ccc 100644
--- a/tests/qemucapabilitiesdata/caps_6.2.0.ppc64.xml
+++ b/tests/qemucapabilitiesdata/caps_6.2.0.ppc64.xml
@@ -199,6 +199,7 @@
<flag name='query-dirty-rate'/>
<flag name='rbd-encryption'/>
<flag name='sev-guest-kernel-hashes'/>
+ <flag name='calc-dirty-rate'/>
<version>6002000</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>42900244</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml
b/tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml
index 103d00f..f3e86de 100644
--- a/tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml
+++ b/tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml
@@ -239,6 +239,7 @@
<flag name='rbd-encryption'/>
<flag name='sev-guest-kernel-hashes'/>
<flag name='sev-inject-launch-secret'/>
+ <flag name='calc-dirty-rate'/>
<version>6002000</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>43100244</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_7.0.0.ppc64.xml
b/tests/qemucapabilitiesdata/caps_7.0.0.ppc64.xml
index 88eee87..e9e9b43 100644
--- a/tests/qemucapabilitiesdata/caps_7.0.0.ppc64.xml
+++ b/tests/qemucapabilitiesdata/caps_7.0.0.ppc64.xml
@@ -200,6 +200,7 @@
<flag name='rbd-encryption'/>
<flag name='sev-guest-kernel-hashes'/>
<flag name='device.json+hotplug'/>
+ <flag name='calc-dirty-rate'/>
<version>6002050</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>42900243</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_7.0.0.x86_64.xml
b/tests/qemucapabilitiesdata/caps_7.0.0.x86_64.xml
index 07d49a8..9ca33f9 100644
--- a/tests/qemucapabilitiesdata/caps_7.0.0.x86_64.xml
+++ b/tests/qemucapabilitiesdata/caps_7.0.0.x86_64.xml
@@ -241,6 +241,7 @@
<flag name='sev-inject-launch-secret'/>
<flag name='device.json+hotplug'/>
<flag name='virtio-mem-pci.prealloc'/>
+ <flag name='calc-dirty-rate'/>
<version>6002050</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>43100243</microcodeVersion>
--
1.8.3.1
7:28 a.m.
New subject: [PATCH v6 2/8] qemu_driver: Probe capability before calculating dirty page rate
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
Probing QEMU_CAPS_CALC_DIRTY_RATE capability in advance
in case of failure when calculating dirty page rate.
Signed-off-by: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
---
src/qemu/qemu_driver.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index f1f708e..9b50f5f 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -20693,6 +20693,13 @@ qemuDomainStartDirtyRateCalc(virDomainPtr dom,
if (virDomainStartDirtyRateCalcEnsureACL(dom->conn, vm->def) < 0)
goto cleanup;
+ priv = vm->privateData;
+ if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_CALC_DIRTY_RATE)) {
+ virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
+ _("QEMU does not support calculating dirty page
rate"));
+ goto cleanup;
+ }
+
if (qemuDomainObjBeginJob(driver, vm, QEMU_JOB_MODIFY) < 0)
goto cleanup;
@@ -20704,7 +20711,6 @@ qemuDomainStartDirtyRateCalc(virDomainPtr dom,
VIR_DEBUG("Calculate dirty rate in next %d seconds", seconds);
- priv = vm->privateData;
qemuDomainObjEnterMonitor(driver, vm);
ret = qemuMonitorStartDirtyRateCalc(priv->mon, seconds);
--
1.8.3.1
6:34 a.m.
New subject: [PATCH v6 2/8] qemu_driver: Probe capability before calculating dirty page rate
On 2/20/22 14:28, huangy81(a)chinatelecom.cn wrote:
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
Probing QEMU_CAPS_CALC_DIRTY_RATE capability in advance
in case of failure when calculating dirty page rate.
Signed-off-by: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
---
src/qemu/qemu_driver.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index f1f708e..9b50f5f 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -20693,6 +20693,13 @@ qemuDomainStartDirtyRateCalc(virDomainPtr dom,
if (virDomainStartDirtyRateCalcEnsureACL(dom->conn, vm->def) < 0)
goto cleanup;
+ priv = vm->privateData;
+ if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_CALC_DIRTY_RATE)) {
+ virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
+ _("QEMU does not support calculating dirty page
rate"));
+ goto cleanup;
+ }
+
Sorry for not telling you the whole truth. priv->qemuCaps is populated
only when domain is running. Therefore for inactive domains this ^^^
error message is reported which may be a bit misleading. But the fix is
trivial, just check whether domain is active before querying priv-qemuCaps.
if (qemuDomainObjBeginJob(driver, vm, QEMU_JOB_MODIFY) < 0)
goto cleanup;
@@ -20704,7 +20711,6 @@ qemuDomainStartDirtyRateCalc(virDomainPtr dom,
VIR_DEBUG("Calculate dirty rate in next %d seconds", seconds);
- priv = vm->privateData;
qemuDomainObjEnterMonitor(driver, vm);
ret = qemuMonitorStartDirtyRateCalc(priv->mon, seconds);
Michal
6:53 a.m.
New subject: [PATCH v6 2/8] qemu_driver: Probe capability before calculating dirty page rate
在 2022/2/21 20:34, Michal Prívozník 写道:
On 2/20/22 14:28, huangy81(a)chinatelecom.cn wrote:
> From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
>
> Probing QEMU_CAPS_CALC_DIRTY_RATE capability in advance
> in case of failure when calculating dirty page rate.
>
> Signed-off-by: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
> ---
> src/qemu/qemu_driver.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
> index f1f708e..9b50f5f 100644
> --- a/src/qemu/qemu_driver.c
> +++ b/src/qemu/qemu_driver.c
> @@ -20693,6 +20693,13 @@ qemuDomainStartDirtyRateCalc(virDomainPtr dom,
> if (virDomainStartDirtyRateCalcEnsureACL(dom->conn, vm->def) < 0)
> goto cleanup;
>
> + priv = vm->privateData;
> + if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_CALC_DIRTY_RATE)) {
> + virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
> + _("QEMU does not support calculating dirty page
rate"));
> + goto cleanup;
> + }
> +
Sorry for not telling you the whole truth. priv->qemuCaps is populated
only when domain is running. Therefore for inactive domains this ^^^
error message is reported which may be a bit misleading. But the fix is
trivial, just check whether domain is active before querying priv-qemuCaps.
Ok, got it :)
> if (qemuDomainObjBeginJob(driver, vm, QEMU_JOB_MODIFY) <
0)
> goto cleanup;
>
> @@ -20704,7 +20711,6 @@ qemuDomainStartDirtyRateCalc(virDomainPtr dom,
>
> VIR_DEBUG("Calculate dirty rate in next %d seconds", seconds);
>
> - priv = vm->privateData;
> qemuDomainObjEnterMonitor(driver, vm);
> ret = qemuMonitorStartDirtyRateCalc(priv->mon, seconds);
>
Michal
--
Best regard
Hyman Huang(黄勇)
7:28 a.m.
New subject: [PATCH v6 3/8] qemu_capabilities: Introduce QEMU_CAPS_DIRTYRATE_MODE capability
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
mode option of calc-dirty-rate command since qemu >=6.2.0.
Introduce QEMU_CAPS_DIRTYRATE_MODE capability definition.
Signed-off-by: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
---
src/qemu/qemu_capabilities.c | 2 ++
src/qemu/qemu_capabilities.h | 1 +
tests/qemucapabilitiesdata/caps_6.2.0.ppc64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_7.0.0.ppc64.xml | 1 +
tests/qemucapabilitiesdata/caps_7.0.0.x86_64.xml | 1 +
6 files changed, 7 insertions(+)
diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c
index 968185e..529e9ce 100644
--- a/src/qemu/qemu_capabilities.c
+++ b/src/qemu/qemu_capabilities.c
@@ -664,6 +664,7 @@ VIR_ENUM_IMPL(virQEMUCaps,
"hvf", /* QEMU_CAPS_HVF */
"virtio-mem-pci.prealloc", /*
QEMU_CAPS_DEVICE_VIRTIO_MEM_PCI_PREALLOC */
"calc-dirty-rate", /* QEMU_CAPS_CALC_DIRTY_RATE */
+ "dirtyrate-param.mode", /* QEMU_CAPS_DIRTYRATE_MODE */
);
@@ -1622,6 +1623,7 @@ static struct virQEMUCapsStringFlags virQEMUCapsQMPSchemaQueries[] =
{
{ "screendump/arg-type/device", QEMU_CAPS_SCREENDUMP_DEVICE },
{ "set-numa-node/arg-type/+hmat-lb", QEMU_CAPS_NUMA_HMAT },
{ "object-add/arg-type/+sev-guest/kernel-hashes",
QEMU_CAPS_SEV_GUEST_KERNEL_HASHES },
+ { "calc-dirty-rate/arg-type/mode", QEMU_CAPS_DIRTYRATE_MODE },
};
typedef struct _virQEMUCapsObjectTypeProps virQEMUCapsObjectTypeProps;
diff --git a/src/qemu/qemu_capabilities.h b/src/qemu/qemu_capabilities.h
index a295bf0..f6188b4 100644
--- a/src/qemu/qemu_capabilities.h
+++ b/src/qemu/qemu_capabilities.h
@@ -639,6 +639,7 @@ typedef enum { /* virQEMUCapsFlags grouping marker for syntax-check
*/
QEMU_CAPS_HVF, /* Whether Hypervisor.framework is available */
QEMU_CAPS_DEVICE_VIRTIO_MEM_PCI_PREALLOC, /* -device virtio-mem-pci.prealloc= */
QEMU_CAPS_CALC_DIRTY_RATE, /* accepts calc-dirty-rate */
+ QEMU_CAPS_DIRTYRATE_MODE , /* calc-dirty-rate accepts mode parameter */
QEMU_CAPS_LAST /* this must always be the last item */
} virQEMUCapsFlags;
diff --git a/tests/qemucapabilitiesdata/caps_6.2.0.ppc64.xml
b/tests/qemucapabilitiesdata/caps_6.2.0.ppc64.xml
index eaa0ccc..9fe9c27 100644
--- a/tests/qemucapabilitiesdata/caps_6.2.0.ppc64.xml
+++ b/tests/qemucapabilitiesdata/caps_6.2.0.ppc64.xml
@@ -200,6 +200,7 @@
<flag name='rbd-encryption'/>
<flag name='sev-guest-kernel-hashes'/>
<flag name='calc-dirty-rate'/>
+ <flag name='dirtyrate-param.mode'/>
<version>6002000</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>42900244</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml
b/tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml
index f3e86de..d77907a 100644
--- a/tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml
+++ b/tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml
@@ -240,6 +240,7 @@
<flag name='sev-guest-kernel-hashes'/>
<flag name='sev-inject-launch-secret'/>
<flag name='calc-dirty-rate'/>
+ <flag name='dirtyrate-param.mode'/>
<version>6002000</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>43100244</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_7.0.0.ppc64.xml
b/tests/qemucapabilitiesdata/caps_7.0.0.ppc64.xml
index e9e9b43..5d7f283 100644
--- a/tests/qemucapabilitiesdata/caps_7.0.0.ppc64.xml
+++ b/tests/qemucapabilitiesdata/caps_7.0.0.ppc64.xml
@@ -201,6 +201,7 @@
<flag name='sev-guest-kernel-hashes'/>
<flag name='device.json+hotplug'/>
<flag name='calc-dirty-rate'/>
+ <flag name='dirtyrate-param.mode'/>
<version>6002050</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>42900243</microcodeVersion>
diff --git a/tests/qemucapabilitiesdata/caps_7.0.0.x86_64.xml
b/tests/qemucapabilitiesdata/caps_7.0.0.x86_64.xml
index 9ca33f9..ae800ab 100644
--- a/tests/qemucapabilitiesdata/caps_7.0.0.x86_64.xml
+++ b/tests/qemucapabilitiesdata/caps_7.0.0.x86_64.xml
@@ -242,6 +242,7 @@
<flag name='device.json+hotplug'/>
<flag name='virtio-mem-pci.prealloc'/>
<flag name='calc-dirty-rate'/>
+ <flag name='dirtyrate-param.mode'/>
<version>6002050</version>
<kvmVersion>0</kvmVersion>
<microcodeVersion>43100243</microcodeVersion>
--
1.8.3.1
7:28 a.m.
New subject: [PATCH v6 4/8] include: Introduce virDomainDirtyRateCalcFlags
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
Introduce virDomainDirtyRateCalcFlags to get ready for
adding mode parameter to qemuDomainStartDirtyRateCalc.
Signed-off-by: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
---
include/libvirt/libvirt-domain.h | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/include/libvirt/libvirt-domain.h b/include/libvirt/libvirt-domain.h
index 8c16598..2d57183 100644
--- a/include/libvirt/libvirt-domain.h
+++ b/include/libvirt/libvirt-domain.h
@@ -5259,6 +5259,19 @@ typedef enum {
# endif
} virDomainDirtyRateStatus;
+/**
+ * virDomainDirtyRateCalcFlags:
+ *
+ * Flags OR'ed together to provide specific behaviour when calculating dirty page
+ * rate for a Domain
+ *
+ */
+typedef enum {
+ VIR_DOMAIN_DIRTYRATE_MODE_PAGE_SAMPLING = 0, /* default mode - page-sampling
*/
+ VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_BITMAP = 1 << 0, /* dirty-bitmap mode */
+ VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_RING = 1 << 1, /* dirty-ring mode */
+} virDomainDirtyRateCalcFlags;
+
int virDomainStartDirtyRateCalc(virDomainPtr domain,
int seconds,
unsigned int flags);
--
1.8.3.1
6:35 a.m.
New subject: [PATCH v6 4/8] include: Introduce virDomainDirtyRateCalcFlags
On 2/20/22 14:28, huangy81(a)chinatelecom.cn wrote:
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
Introduce virDomainDirtyRateCalcFlags to get ready for
adding mode parameter to qemuDomainStartDirtyRateCalc.
Signed-off-by: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
---
include/libvirt/libvirt-domain.h | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/include/libvirt/libvirt-domain.h b/include/libvirt/libvirt-domain.h
index 8c16598..2d57183 100644
--- a/include/libvirt/libvirt-domain.h
+++ b/include/libvirt/libvirt-domain.h
@@ -5259,6 +5259,19 @@ typedef enum {
# endif
} virDomainDirtyRateStatus;
+/**
+ * virDomainDirtyRateCalcFlags:
+ *
+ * Flags OR'ed together to provide specific behaviour when calculating dirty page
+ * rate for a Domain
+ *
+ */
+typedef enum {
+ VIR_DOMAIN_DIRTYRATE_MODE_PAGE_SAMPLING = 0, /* default mode - page-sampling
*/
+ VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_BITMAP = 1 << 0, /* dirty-bitmap mode */
+ VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_RING = 1 << 1, /* dirty-ring mode */
+} virDomainDirtyRateCalcFlags;
+
int virDomainStartDirtyRateCalc(virDomainPtr domain,
int seconds,
unsigned int flags);
This is the correct places to introduce VIR_EXCLUSIVE_FLAGS_GOTO()
checks to the public API and also describe flags in the API comment (as
done in 7/8).
Michal
7:28 a.m.
New subject: [PATCH v6 5/8] qemu_driver: Add mode parameter to qemuDomainStartDirtyRateCalc
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
Add mode parameter to qemuDomainStartDirtyRateCalc API, 'mode'
option of 'calc-dirty-rate' command was introduced since
qemu >= 6.2.
Signed-off-by: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
---
src/qemu/qemu_driver.c | 3 ++-
src/qemu/qemu_monitor.c | 5 +++--
src/qemu/qemu_monitor.h | 17 ++++++++++++++++-
src/qemu/qemu_monitor_json.c | 16 ++++++++++++++--
src/qemu/qemu_monitor_json.h | 3 ++-
5 files changed, 37 insertions(+), 7 deletions(-)
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index 9b50f5f..db4efcd 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -20673,6 +20673,7 @@ qemuDomainStartDirtyRateCalc(virDomainPtr dom,
virQEMUDriver *driver = dom->conn->privateData;
virDomainObj *vm = NULL;
qemuDomainObjPrivate *priv;
+ qemuMonitorDirtyRateCalcMode mode = QEMU_MONITOR_DIRTYRATE_CALC_MODE_PAGE_SAMPLING;
int ret = -1;
virCheckFlags(0, -1);
@@ -20712,7 +20713,7 @@ qemuDomainStartDirtyRateCalc(virDomainPtr dom,
VIR_DEBUG("Calculate dirty rate in next %d seconds", seconds);
qemuDomainObjEnterMonitor(driver, vm);
- ret = qemuMonitorStartDirtyRateCalc(priv->mon, seconds);
+ ret = qemuMonitorStartDirtyRateCalc(priv->mon, seconds, mode);
qemuDomainObjExitMonitor(driver, vm);
diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c
index dc81e41..0ff938a 100644
--- a/src/qemu/qemu_monitor.c
+++ b/src/qemu/qemu_monitor.c
@@ -4475,13 +4475,14 @@ qemuMonitorTransactionBackup(virJSONValue *actions,
int
qemuMonitorStartDirtyRateCalc(qemuMonitor *mon,
- int seconds)
+ int seconds,
+ qemuMonitorDirtyRateCalcMode mode)
{
VIR_DEBUG("seconds=%d", seconds);
QEMU_CHECK_MONITOR(mon);
- return qemuMonitorJSONStartDirtyRateCalc(mon, seconds);
+ return qemuMonitorJSONStartDirtyRateCalc(mon, seconds, mode);
}
diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h
index 1d21183..053479b 100644
--- a/src/qemu/qemu_monitor.h
+++ b/src/qemu/qemu_monitor.h
@@ -1534,9 +1534,24 @@ qemuMonitorTransactionBackup(virJSONValue *actions,
const char *bitmap,
qemuMonitorTransactionBackupSyncMode syncmode);
+/**
+ * qemuMonitorDirtyRateCalcMode:
+ *
+ * Dirty page rate calculation mode used during measurement.
+ */
+typedef enum {
+ QEMU_MONITOR_DIRTYRATE_CALC_MODE_PAGE_SAMPLING = 0,
+ QEMU_MONITOR_DIRTYRATE_CALC_MODE_DIRTY_BITMAP,
+ QEMU_MONITOR_DIRTYRATE_CALC_MODE_DIRTY_RING,
+ QEMU_MONITOR_DIRTYRATE_CALC_MODE_LAST,
+} qemuMonitorDirtyRateCalcMode;
+
+VIR_ENUM_DECL(qemuMonitorDirtyRateCalcMode);
+
int
qemuMonitorStartDirtyRateCalc(qemuMonitor *mon,
- int seconds);
+ int seconds,
+ qemuMonitorDirtyRateCalcMode mode);
typedef struct _qemuMonitorDirtyRateInfo qemuMonitorDirtyRateInfo;
struct _qemuMonitorDirtyRateInfo {
diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
index 1de932f..da9a4d9 100644
--- a/src/qemu/qemu_monitor_json.c
+++ b/src/qemu/qemu_monitor_json.c
@@ -8740,18 +8740,30 @@ qemuMonitorJSONGetCPUMigratable(qemuMonitor *mon,
migratable);
}
+VIR_ENUM_IMPL(qemuMonitorDirtyRateCalcMode,
+ QEMU_MONITOR_DIRTYRATE_CALC_MODE_LAST,
+ "page-sampling",
+ "dirty-bitmap",
+ "dirty-ring");
int
qemuMonitorJSONStartDirtyRateCalc(qemuMonitor *mon,
- int seconds)
+ int seconds,
+ qemuMonitorDirtyRateCalcMode mode)
{
g_autoptr(virJSONValue) cmd = NULL;
g_autoptr(virJSONValue) reply = NULL;
+ const char *modestr = NULL;
+
+ if (mode != QEMU_MONITOR_DIRTYRATE_CALC_MODE_PAGE_SAMPLING)
+ modestr = qemuMonitorDirtyRateCalcModeTypeToString(mode);
if (!(cmd = qemuMonitorJSONMakeCommand("calc-dirty-rate",
"i:calc-time", seconds,
- NULL)))
+ "S:mode", modestr,
+ NULL))) {
return -1;
+ }
if (qemuMonitorJSONCommand(mon, cmd, &reply) < 0)
return -1;
diff --git a/src/qemu/qemu_monitor_json.h b/src/qemu/qemu_monitor_json.h
index eea3478..8e34f3b 100644
--- a/src/qemu/qemu_monitor_json.h
+++ b/src/qemu/qemu_monitor_json.h
@@ -853,7 +853,8 @@ qemuMonitorJSONGetCPUMigratable(qemuMonitor *mon,
int
qemuMonitorJSONStartDirtyRateCalc(qemuMonitor *mon,
- int seconds);
+ int seconds,
+ qemuMonitorDirtyRateCalcMode mode);
int
qemuMonitorJSONQueryDirtyRate(qemuMonitor *mon,
--
1.8.3.1
7:28 a.m.
New subject: [PATCH v6 6/8] qemu_driver: Extend flags parameter of virDomainStartDirtyRateCalc
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
Extend flags parameter of virDomainStartDirtyRateCalc as a
superset of virDomainDirtyRateCalcFlags, parse the flags and
handle it correspondingly in qemuDomainStartDirtyRateCalc.
Signed-off-by: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
---
src/qemu/qemu_driver.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index db4efcd..3297513 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -20676,7 +20676,9 @@ qemuDomainStartDirtyRateCalc(virDomainPtr dom,
qemuMonitorDirtyRateCalcMode mode = QEMU_MONITOR_DIRTYRATE_CALC_MODE_PAGE_SAMPLING;
int ret = -1;
- virCheckFlags(0, -1);
+ virCheckFlags(VIR_DOMAIN_DIRTYRATE_MODE_PAGE_SAMPLING |
+ VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_BITMAP |
+ VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_RING, -1);
if (seconds < MIN_DIRTYRATE_CALC_PERIOD ||
seconds > MAX_DIRTYRATE_CALC_PERIOD) {
@@ -20701,6 +20703,25 @@ qemuDomainStartDirtyRateCalc(virDomainPtr dom,
goto cleanup;
}
+ if (flags & VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_BITMAP) {
+ mode = QEMU_MONITOR_DIRTYRATE_CALC_MODE_DIRTY_BITMAP;
+ } else if (flags & VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_RING) {
+ if (vm->def->features[VIR_DOMAIN_FEATURE_KVM] != VIR_TRISTATE_SWITCH_ON ||
+ vm->def->kvm_features->features[VIR_DOMAIN_KVM_DIRTY_RING] !=
VIR_TRISTATE_SWITCH_ON) {
+ virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
+ _("dirty-ring calculation mode requires dirty-ring
feature enabled."));
+ goto cleanup;
+ }
+ mode = QEMU_MONITOR_DIRTYRATE_CALC_MODE_DIRTY_RING;
+ }
+
+ if (mode != QEMU_MONITOR_DIRTYRATE_CALC_MODE_PAGE_SAMPLING &&
+ !virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DIRTYRATE_MODE)) {
+ virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
+ _("QEMU does not support dirty page rate calculation
mode."));
+ goto cleanup;
+ }
+
if (qemuDomainObjBeginJob(driver, vm, QEMU_JOB_MODIFY) < 0)
goto cleanup;
--
1.8.3.1
7:28 a.m.
New subject: [PATCH v6 7/8] virsh: Add mode option to domdirtyrate-calc virsh api
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
Extend domdirtyrate-calc virsh api with mode option, either
of these three options "page-sampling,dirty-bitmap,dirty-ring"
can be specified when calculating dirty page rate.
Signed-off-by: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
---
docs/manpages/virsh.rst | 7 +++++--
src/libvirt-domain.c | 12 +++++++++++-
tools/virsh-completer-domain.c | 17 +++++++++++++++++
tools/virsh-completer-domain.h | 4 ++++
tools/virsh-domain.c | 42 +++++++++++++++++++++++++++++++++++++++++-
tools/virsh-domain.h | 9 +++++++++
6 files changed, 87 insertions(+), 4 deletions(-)
diff --git a/docs/manpages/virsh.rst b/docs/manpages/virsh.rst
index 429879d..00d21a1 100644
--- a/docs/manpages/virsh.rst
+++ b/docs/manpages/virsh.rst
@@ -1717,13 +1717,16 @@ domdirtyrate-calc
::
domdirtyrate-calc <domain> [--seconds <sec>]
+ --mode=[page-sampling | dirty-bitmap | dirty-ring]
Calculate an active domain's memory dirty rate which may be expected by
user in order to decide whether it's proper to be migrated out or not.
The ``seconds`` parameter can be used to calculate dirty rate in a
specific time which allows 60s at most now and would be default to 1s
-if missing. The calculated dirty rate information is available by calling
-'domstats --dirtyrate'.
+if missing. These three *page-sampling, dirty-bitmap, dirty-ring* modes
+are mutually exclusive and alternative when specify calculation mode,
+*page-sampling* is the default mode if missing. The calculated dirty
+rate information is available by calling 'domstats --dirtyrate'.
domdisplay
diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c
index 8be2c21..7be4e02 100644
--- a/src/libvirt-domain.c
+++ b/src/libvirt-domain.c
@@ -13337,7 +13337,7 @@ virDomainGetMessages(virDomainPtr domain,
* virDomainStartDirtyRateCalc:
* @domain: a domain object
* @seconds: specified calculating time in seconds
- * @flags: extra flags; not used yet, so callers should always pass 0
+ * @flags: bitwise-OR of supported virDomainDirtyRateCalcFlags
*
* Calculate the current domain's memory dirty rate in next @seconds.
* The calculated dirty rate information is available by calling
@@ -13361,6 +13361,16 @@ virDomainStartDirtyRateCalc(virDomainPtr domain,
virCheckReadOnlyGoto(conn->flags, error);
+ VIR_EXCLUSIVE_FLAGS_GOTO(VIR_DOMAIN_DIRTYRATE_MODE_PAGE_SAMPLING,
+ VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_BITMAP,
+ error);
+ VIR_EXCLUSIVE_FLAGS_GOTO(VIR_DOMAIN_DIRTYRATE_MODE_PAGE_SAMPLING,
+ VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_RING,
+ error);
+ VIR_EXCLUSIVE_FLAGS_GOTO(VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_BITMAP,
+ VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_RING,
+ error);
+
if (conn->driver->domainStartDirtyRateCalc) {
int ret;
ret = conn->driver->domainStartDirtyRateCalc(domain, seconds, flags);
diff --git a/tools/virsh-completer-domain.c b/tools/virsh-completer-domain.c
index b4e744c..1c2df56 100644
--- a/tools/virsh-completer-domain.c
+++ b/tools/virsh-completer-domain.c
@@ -1150,3 +1150,20 @@ virshDomainNumatuneModeCompleter(vshControl *ctl G_GNUC_UNUSED,
return ret;
}
+
+
+char **
+virshDomainDirtyRateCalcModeCompleter(vshControl *ctl,
+ const vshCmd *cmd,
+ unsigned int flags)
+{
+ const char *modes[] = {"page-sampling", "dirty-bitmap",
"dirty-ring", NULL};
+ const char *mode = NULL;
+
+ virCheckFlags(0, NULL);
+
+ if (vshCommandOptStringQuiet(ctl, cmd, "mode", &mode) < 0)
+ return NULL;
+
+ return virshCommaStringListComplete(mode, modes);
+}
diff --git a/tools/virsh-completer-domain.h b/tools/virsh-completer-domain.h
index 94bb3b5..044c675 100644
--- a/tools/virsh-completer-domain.h
+++ b/tools/virsh-completer-domain.h
@@ -186,3 +186,7 @@ char **
virshDomainNumatuneModeCompleter(vshControl *ctl,
const vshCmd *cmd,
unsigned int flags);
+char **
+virshDomainDirtyRateCalcModeCompleter(vshControl *ctl,
+ const vshCmd *cmd,
+ unsigned int flags);
diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c
index 433ea67..256258b 100644
--- a/tools/virsh-domain.c
+++ b/tools/virsh-domain.c
@@ -14486,14 +14486,28 @@ static const vshCmdOptDef opts_domdirtyrate_calc[] = {
.help = N_("calculate memory dirty rate within specified seconds, "
"the supported value range from 1 to 60, default to 1.")
},
+ {.name = "mode",
+ .type = VSH_OT_STRING,
+ .completer = virshDomainDirtyRateCalcModeCompleter,
+ .help = N_("dirty page rate calculation mode, either of these 3 options "
+ "'page-sampling,dirty-bitmap,dirty-ring' can be
specified.")
+ },
{.name = NULL}
};
+VIR_ENUM_IMPL(virshDomainDirtyRateCalcMode,
+ VIRSH_DOMAIN_DIRTYRATE_CALC_MODE_LAST,
+ "page-sampling",
+ "dirty-bitmap",
+ "dirty-ring");
+
static bool
cmdDomDirtyRateCalc(vshControl *ctl, const vshCmd *cmd)
{
g_autoptr(virshDomain) dom = NULL;
int seconds = 1; /* the default value is 1 */
+ const char *modestr = NULL;
+ unsigned int flags = 0;
if (!(dom = virshCommandOptDomain(ctl, cmd, NULL)))
return false;
@@ -14501,7 +14515,33 @@ cmdDomDirtyRateCalc(vshControl *ctl, const vshCmd *cmd)
if (vshCommandOptInt(ctl, cmd, "seconds", &seconds) < 0)
return false;
- if (virDomainStartDirtyRateCalc(dom, seconds, 0) < 0)
+ if (vshCommandOptStringReq(ctl, cmd, "mode", &modestr) < 0)
+ return false;
+
+ if (modestr) {
+ int mode = virshDomainDirtyRateCalcModeTypeFromString(modestr);
+
+ if (mode < 0) {
+ vshError(ctl, _("Unknown calculation mode '%s'"),
modestr);
+ return false;
+ }
+
+ switch ((virshDomainDirtyRateCalcMode) mode) {
+ case VIRSH_DOMAIN_DIRTYRATE_CALC_MODE_PAGE_SAMPLING:
+ flags |= VIR_DOMAIN_DIRTYRATE_MODE_PAGE_SAMPLING;
+ break;
+ case VIRSH_DOMAIN_DIRTYRATE_CALC_MODE_DIRTY_BITMAP:
+ flags |= VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_BITMAP;;
+ break;
+ case VIRSH_DOMAIN_DIRTYRATE_CALC_MODE_DIRTY_RING:
+ flags |= VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_RING;;
+ break;
+ case VIRSH_DOMAIN_DIRTYRATE_CALC_MODE_LAST:
+ break;
+ }
+ }
+
+ if (virDomainStartDirtyRateCalc(dom, seconds, flags) < 0)
return false;
vshPrintExtra(ctl, _("Start to calculate domain's memory "
diff --git a/tools/virsh-domain.h b/tools/virsh-domain.h
index cf5ce28..6a94438 100644
--- a/tools/virsh-domain.h
+++ b/tools/virsh-domain.h
@@ -46,6 +46,15 @@ typedef enum {
VIR_ENUM_DECL(virshDomainInterfaceSourceMode);
+typedef enum {
+ VIRSH_DOMAIN_DIRTYRATE_CALC_MODE_PAGE_SAMPLING,
+ VIRSH_DOMAIN_DIRTYRATE_CALC_MODE_DIRTY_BITMAP,
+ VIRSH_DOMAIN_DIRTYRATE_CALC_MODE_DIRTY_RING,
+ VIRSH_DOMAIN_DIRTYRATE_CALC_MODE_LAST,
+} virshDomainDirtyRateCalcMode;
+
+VIR_ENUM_DECL(virshDomainDirtyRateCalcMode);
+
extern const vshCmdDef domManagementCmds[];
VIR_ENUM_DECL(virshDomainProcessSignal);
--
1.8.3.1
6:34 a.m.
New subject: [PATCH v6 7/8] virsh: Add mode option to domdirtyrate-calc virsh api
On 2/20/22 14:28, huangy81(a)chinatelecom.cn wrote:
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
Extend domdirtyrate-calc virsh api with mode option, either
of these three options "page-sampling,dirty-bitmap,dirty-ring"
can be specified when calculating dirty page rate.
Signed-off-by: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
---
docs/manpages/virsh.rst | 7 +++++--
src/libvirt-domain.c | 12 +++++++++++-
tools/virsh-completer-domain.c | 17 +++++++++++++++++
tools/virsh-completer-domain.h | 4 ++++
tools/virsh-domain.c | 42 +++++++++++++++++++++++++++++++++++++++++-
tools/virsh-domain.h | 9 +++++++++
6 files changed, 87 insertions(+), 4 deletions(-)
diff --git a/docs/manpages/virsh.rst b/docs/manpages/virsh.rst
index 429879d..00d21a1 100644
--- a/docs/manpages/virsh.rst
+++ b/docs/manpages/virsh.rst
@@ -1717,13 +1717,16 @@ domdirtyrate-calc
::
domdirtyrate-calc <domain> [--seconds <sec>]
+ --mode=[page-sampling | dirty-bitmap | dirty-ring]
Calculate an active domain's memory dirty rate which may be expected by
user in order to decide whether it's proper to be migrated out or not.
The ``seconds`` parameter can be used to calculate dirty rate in a
specific time which allows 60s at most now and would be default to 1s
-if missing. The calculated dirty rate information is available by calling
-'domstats --dirtyrate'.
+if missing. These three *page-sampling, dirty-bitmap, dirty-ring* modes
+are mutually exclusive and alternative when specify calculation mode,
+*page-sampling* is the default mode if missing. The calculated dirty
+rate information is available by calling 'domstats --dirtyrate'.
domdisplay
diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c
index 8be2c21..7be4e02 100644
--- a/src/libvirt-domain.c
+++ b/src/libvirt-domain.c
@@ -13337,7 +13337,7 @@ virDomainGetMessages(virDomainPtr domain,
* virDomainStartDirtyRateCalc:
* @domain: a domain object
* @seconds: specified calculating time in seconds
- * @flags: extra flags; not used yet, so callers should always pass 0
+ * @flags: bitwise-OR of supported virDomainDirtyRateCalcFlags
*
* Calculate the current domain's memory dirty rate in next @seconds.
* The calculated dirty rate information is available by calling
@@ -13361,6 +13361,16 @@ virDomainStartDirtyRateCalc(virDomainPtr domain,
virCheckReadOnlyGoto(conn->flags, error);
+ VIR_EXCLUSIVE_FLAGS_GOTO(VIR_DOMAIN_DIRTYRATE_MODE_PAGE_SAMPLING,
+ VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_BITMAP,
+ error);
+ VIR_EXCLUSIVE_FLAGS_GOTO(VIR_DOMAIN_DIRTYRATE_MODE_PAGE_SAMPLING,
+ VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_RING,
+ error);
+ VIR_EXCLUSIVE_FLAGS_GOTO(VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_BITMAP,
+ VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_RING,
+ error);
+
if (conn->driver->domainStartDirtyRateCalc) {
int ret;
ret = conn->driver->domainStartDirtyRateCalc(domain, seconds, flags);
diff --git a/tools/virsh-completer-domain.c b/tools/virsh-completer-domain.c
index b4e744c..1c2df56 100644
--- a/tools/virsh-completer-domain.c
+++ b/tools/virsh-completer-domain.c
@@ -1150,3 +1150,20 @@ virshDomainNumatuneModeCompleter(vshControl *ctl G_GNUC_UNUSED,
return ret;
}
+
+
+char **
+virshDomainDirtyRateCalcModeCompleter(vshControl *ctl,
+ const vshCmd *cmd,
+ unsigned int flags)
+{
+ const char *modes[] = {"page-sampling", "dirty-bitmap",
"dirty-ring", NULL};
+ const char *mode = NULL;
+
+ virCheckFlags(0, NULL);
+
+ if (vshCommandOptStringQuiet(ctl, cmd, "mode", &mode) < 0)
+ return NULL;
+
+ return virshCommaStringListComplete(mode, modes);
No, the --mode argument supports only one value. It doesn't support
--mode page-sampling,dirty-bitmap,dirty-ring.
+}
diff --git a/tools/virsh-completer-domain.h b/tools/virsh-completer-domain.h
index 94bb3b5..044c675 100644
--- a/tools/virsh-completer-domain.h
+++ b/tools/virsh-completer-domain.h
@@ -186,3 +186,7 @@ char **
virshDomainNumatuneModeCompleter(vshControl *ctl,
const vshCmd *cmd,
unsigned int flags);
+char **
+virshDomainDirtyRateCalcModeCompleter(vshControl *ctl,
+ const vshCmd *cmd,
+ unsigned int flags);
diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c
index 433ea67..256258b 100644
--- a/tools/virsh-domain.c
+++ b/tools/virsh-domain.c
@@ -14486,14 +14486,28 @@ static const vshCmdOptDef opts_domdirtyrate_calc[] = {
.help = N_("calculate memory dirty rate within specified seconds, "
"the supported value range from 1 to 60, default to 1.")
},
+ {.name = "mode",
+ .type = VSH_OT_STRING,
+ .completer = virshDomainDirtyRateCalcModeCompleter,
+ .help = N_("dirty page rate calculation mode, either of these 3 options
"
+ "'page-sampling,dirty-bitmap,dirty-ring' can be
specified.")
+ },
{.name = NULL}
};
+VIR_ENUM_IMPL(virshDomainDirtyRateCalcMode,
+ VIRSH_DOMAIN_DIRTYRATE_CALC_MODE_LAST,
+ "page-sampling",
+ "dirty-bitmap",
+ "dirty-ring");
+
static bool
cmdDomDirtyRateCalc(vshControl *ctl, const vshCmd *cmd)
{
g_autoptr(virshDomain) dom = NULL;
int seconds = 1; /* the default value is 1 */
+ const char *modestr = NULL;
+ unsigned int flags = 0;
if (!(dom = virshCommandOptDomain(ctl, cmd, NULL)))
return false;
@@ -14501,7 +14515,33 @@ cmdDomDirtyRateCalc(vshControl *ctl, const vshCmd *cmd)
if (vshCommandOptInt(ctl, cmd, "seconds", &seconds) < 0)
return false;
- if (virDomainStartDirtyRateCalc(dom, seconds, 0) < 0)
+ if (vshCommandOptStringReq(ctl, cmd, "mode", &modestr) < 0)
+ return false;
+
+ if (modestr) {
+ int mode = virshDomainDirtyRateCalcModeTypeFromString(modestr);
+
+ if (mode < 0) {
+ vshError(ctl, _("Unknown calculation mode '%s'"),
modestr);
+ return false;
+ }
+
+ switch ((virshDomainDirtyRateCalcMode) mode) {
+ case VIRSH_DOMAIN_DIRTYRATE_CALC_MODE_PAGE_SAMPLING:
+ flags |= VIR_DOMAIN_DIRTYRATE_MODE_PAGE_SAMPLING;
+ break;
+ case VIRSH_DOMAIN_DIRTYRATE_CALC_MODE_DIRTY_BITMAP:
+ flags |= VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_BITMAP;;
One semicolon is enough :-)
+ break;
+ case VIRSH_DOMAIN_DIRTYRATE_CALC_MODE_DIRTY_RING:
+ flags |= VIR_DOMAIN_DIRTYRATE_MODE_DIRTY_RING;;
+ break;
+ case VIRSH_DOMAIN_DIRTYRATE_CALC_MODE_LAST:
+ break;
+ }
+ }
+
+ if (virDomainStartDirtyRateCalc(dom, seconds, flags) < 0)
return false;
vshPrintExtra(ctl, _("Start to calculate domain's memory "
Michal
6:55 a.m.
New subject: [PATCH v6 7/8] virsh: Add mode option to domdirtyrate-calc virsh api
在 2022/2/21 20:34, Michal Prívozník 写道:
On 2/20/22 14:28, huangy81(a)chinatelecom.cn wrote:
> From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
>
> Extend domdirtyrate-calc virsh api with mode option, either
> of these three options "page-sampling,dirty-bitmap,dirty-ring"
> can be specified when calculating dirty page rate.
>
> Signed-off-by: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
> ---
> docs/manpages/virsh.rst | 7 +++++--
> src/libvirt-domain.c | 12 +++++++++++-
> tools/virsh-completer-domain.c | 17 +++++++++++++++++
> tools/virsh-completer-domain.h | 4 ++++
> tools/virsh-domain.c | 42 +++++++++++++++++++++++++++++++++++++++++-
> tools/virsh-domain.h | 9 +++++++++
> 6 files changed, 87 insertions(+), 4 deletions(-)
>
> diff --git a/docs/manpages/virsh.rst b/docs/manpages/virsh.rst
> index 429879d..00d21a1 100644
> --- a/docs/manpages/virsh.rst
> +++ b/docs/manpages/virsh.rst
> @@ -1717,13 +1717,16 @@ domdirtyrate-calc
> ::
>
> domdirtyrate-calc <domain> [--seconds <sec>]
> + --mode=[page-sampling | dirty-bitmap | dirty-ring]
>
> Calculate an active domain's memory dirty rate which may be expected by
> user in order to decide whether it's proper to be migrated out or not.
> The ``seconds`` parameter can be used to calculate dirty rate in a
> specific time which allows 60s at most now and would be default to 1s
> -if missing. The calculated dirty rate information is available by calling
> -'domstats --dirtyrate'.
> +if missing. These three *page-sampling, dirty-bitmap, dirty-ring* modes
> +are mutually exclusive and alternative when specify calculation mode,
> +*page-sampling* is the default mode if missing. The calculated dirty
> +rate information is available by calling 'domstats --dirtyrate'.
>
>
> domdisplay
> diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c
> index 8be2c21..7be4e02 100644
> --- a/src/libvirt-domain.c
> +++ b/src/libvirt-domain.c
> @@ -13337,7 +13337,7 @@ virDomainGetMessages(virDomainPtr domain,
> * virDomainStartDirtyRateCalc:
> * @domain: a domain object
> * @seconds: specified calculating time in seconds
> - * @flags: extra flags; not used yet, so callers should always pass 0
> + * @flags: bitwise-OR of supported virDomainDirtyRateCalcFlags
> *
> * Calculate the current domain's memory dirty rate in next @seconds
7:28 a.m.
New subject: [PATCH v6 8/8] qemu_driver: Add calc_mode for dirtyrate statistics
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
Add calc_mode for dirtyrate statistics retured by
virsh domstats --dirtyrate api, also add vcpu dirtyrate
if dirty-ring mode was used in last measurement.
Signed-off-by: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
---
src/libvirt-domain.c | 6 +++++
src/qemu/qemu_driver.c | 22 +++++++++++++++---
src/qemu/qemu_monitor.h | 10 +++++++++
src/qemu/qemu_monitor_json.c | 53 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 88 insertions(+), 3 deletions(-)
diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c
index 7be4e02..a197618 100644
--- a/src/libvirt-domain.c
+++ b/src/libvirt-domain.c
@@ -11980,6 +11980,12 @@ virConnectGetDomainCapabilities(virConnectPtr conn,
* "dirtyrate.megabytes_per_second" - the calculated memory dirty rate in
* MiB/s as long long. It is produced
* only if the calc_status is measured.
+ * "dirtyrate.calc_mode" - the calculation mode used last measurement,
either
+ * of these 3
'page-sampling,dirty-bitmap,dirty-ring'
+ * values returned.
+ * "dirtyrate.vcpu.<num>.megabytes_per_second" - the calculated
memory dirty
+ * rate for a virtual cpu as
+ * unsigned long long.
*
* Note that entire stats groups or individual stat fields may be missing from
* the output in case they are not supported by the given hypervisor, are not
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index 3297513..de2fdf7 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -18556,11 +18556,27 @@ qemuDomainGetStatsDirtyRate(virQEMUDriver *driver,
"dirtyrate.calc_period") < 0)
return -1;
- if ((info.status == VIR_DOMAIN_DIRTYRATE_MEASURED) &&
- virTypedParamListAddLLong(params, info.dirtyRate,
- "dirtyrate.megabytes_per_second") < 0)
+ if (virTypedParamListAddString(params,
+ qemuMonitorDirtyRateCalcModeTypeToString(info.mode),
+ "dirtyrate.calc_mode") < 0)
return -1;
+ if (info.status == VIR_DOMAIN_DIRTYRATE_MEASURED) {
+ if (virTypedParamListAddLLong(params, info.dirtyRate,
+ "dirtyrate.megabytes_per_second") <
0)
+ return -1;
+
+ if (info.mode == QEMU_MONITOR_DIRTYRATE_CALC_MODE_DIRTY_RING) {
+ int i;
+ for (i = 0; i < info.nvcpus; i++) {
+ if (virTypedParamListAddULLong(params, info.rates[i].value,
+
"dirtyrate.vcpu.%d.megabytes_per_second",
+ info.rates[i].index) < 0)
+ return -1;
+ }
+ }
+ }
+
return 0;
}
diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h
index 053479b..2c0eed5 100644
--- a/src/qemu/qemu_monitor.h
+++ b/src/qemu/qemu_monitor.h
@@ -1553,6 +1553,12 @@ qemuMonitorStartDirtyRateCalc(qemuMonitor *mon,
int seconds,
qemuMonitorDirtyRateCalcMode mode);
+typedef struct _qemuMonitorDirtyRateVcpu qemuMonitorDirtyRateVcpu;
+struct _qemuMonitorDirtyRateVcpu {
+ int index; /* virtual cpu index */
+ unsigned long long value; /* virtual cpu dirty page rate in MB/s */
+};
+
typedef struct _qemuMonitorDirtyRateInfo qemuMonitorDirtyRateInfo;
struct _qemuMonitorDirtyRateInfo {
int status; /* the status of last dirtyrate calculation,
@@ -1560,6 +1566,10 @@ struct _qemuMonitorDirtyRateInfo {
int calcTime; /* the period of dirtyrate calculation */
long long startTime; /* the start time of dirtyrate calculation */
long long dirtyRate; /* the dirtyrate in MiB/s */
+ qemuMonitorDirtyRateCalcMode mode; /* calculation mode used in
+ last measurement */
+ size_t nvcpus; /* number of virtual cpu */
+ qemuMonitorDirtyRateVcpu *rates; /* array of dirty page rate */
};
int
diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
index da9a4d9..a07f8c9 100644
--- a/src/qemu/qemu_monitor_json.c
+++ b/src/qemu/qemu_monitor_json.c
@@ -8782,11 +8782,45 @@ VIR_ENUM_IMPL(qemuMonitorDirtyRateStatus,
"measured");
static int
+qemuMonitorJSONExtractVcpuDirtyRate(virJSONValue *data,
+ qemuMonitorDirtyRateInfo *info)
+{
+ size_t nvcpus;
+ int i;
+
+ nvcpus = virJSONValueArraySize(data);
+ info->nvcpus = nvcpus;
+ info->rates = g_new0(qemuMonitorDirtyRateVcpu, nvcpus);
+
+ for (i = 0; i < nvcpus; i++) {
+ virJSONValue *entry = virJSONValueArrayGet(data, i);
+ if (virJSONValueObjectGetNumberInt(entry, "id",
+ &info->rates[i].index) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("query-dirty-rate reply was missing 'id'
data"));
+ return -1;
+ }
+
+ if (virJSONValueObjectGetNumberUlong(entry, "dirty-rate",
+ &info->rates[i].value) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("query-dirty-rate reply was missing
'dirty-rate' data"));
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static int
qemuMonitorJSONExtractDirtyRateInfo(virJSONValue *data,
qemuMonitorDirtyRateInfo *info)
{
const char *statusstr;
+ const char *modestr;
int status;
+ int mode;
+ virJSONValue *rates = NULL;
if (!(statusstr = virJSONValueObjectGetString(data, "status"))) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
@@ -8823,6 +8857,25 @@ qemuMonitorJSONExtractDirtyRateInfo(virJSONValue *data,
return -1;
}
+ if ((modestr = virJSONValueObjectGetString(data, "mode"))) {
+ if ((mode = qemuMonitorDirtyRateCalcModeTypeFromString(modestr)) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Unknown dirty page rate calculation mode: %s"),
modestr);
+ return -1;
+ }
+ info->mode = mode;
+ } else {
+ info->mode = QEMU_MONITOR_DIRTYRATE_CALC_MODE_PAGE_SAMPLING;
+ }
+
+ if ((rates = virJSONValueObjectGetArray(data, "vcpu-dirty-rate"))) {
+ if (qemuMonitorJSONExtractVcpuDirtyRate(rates, info) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("query-dirty-rate parsing 'vcpu-dirty-rate' in
failure"));
+ return -1;
+ }
+ }
+
return 0;
}
--
1.8.3.1
6:34 a.m.
New subject: [PATCH v6 8/8] qemu_driver: Add calc_mode for dirtyrate statistics
On 2/20/22 14:28, huangy81(a)chinatelecom.cn wrote:
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
Add calc_mode for dirtyrate statistics retured by
virsh domstats --dirtyrate api, also add vcpu dirtyrate
if dirty-ring mode was used in last measurement.
Signed-off-by: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
---
src/libvirt-domain.c | 6 +++++
src/qemu/qemu_driver.c | 22 +++++++++++++++---
src/qemu/qemu_monitor.h | 10 +++++++++
src/qemu/qemu_monitor_json.c | 53 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 88 insertions(+), 3 deletions(-)
diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c
index 7be4e02..a197618 100644
--- a/src/libvirt-domain.c
+++ b/src/libvirt-domain.c
@@ -11980,6 +11980,12 @@ virConnectGetDomainCapabilities(virConnectPtr conn,
* "dirtyrate.megabytes_per_second" - the calculated memory dirty rate in
* MiB/s as long long. It is produced
* only if the calc_status is measured.
+ * "dirtyrate.calc_mode" - the calculation mode used last measurement,
either
+ * of these 3
'page-sampling,dirty-bitmap,dirty-ring'
+ * values returned.
+ * "dirtyrate.vcpu.<num>.megabytes_per_second" - the calculated
memory dirty
+ * rate for a virtual cpu as
+ * unsigned long long.
*
* Note that entire stats groups or individual stat fields may be missing from
* the output in case they are not supported by the given hypervisor, are not
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index 3297513..de2fdf7 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -18556,11 +18556,27 @@ qemuDomainGetStatsDirtyRate(virQEMUDriver *driver,
"dirtyrate.calc_period") < 0)
return -1;
- if ((info.status == VIR_DOMAIN_DIRTYRATE_MEASURED) &&
- virTypedParamListAddLLong(params, info.dirtyRate,
- "dirtyrate.megabytes_per_second") < 0)
+ if (virTypedParamListAddString(params,
+ qemuMonitorDirtyRateCalcModeTypeToString(info.mode),
+ "dirtyrate.calc_mode") < 0)
return -1;
+ if (info.status == VIR_DOMAIN_DIRTYRATE_MEASURED) {
+ if (virTypedParamListAddLLong(params, info.dirtyRate,
+ "dirtyrate.megabytes_per_second") <
0)
+ return -1;
+
+ if (info.mode == QEMU_MONITOR_DIRTYRATE_CALC_MODE_DIRTY_RING) {
+ int i;
Since info.nvcpus is size_t so must be i. We are not guaranteed that
size_t == int.
+ for (i = 0; i < info.nvcpus; i++) {
+ if (virTypedParamListAddULLong(params, info.rates[i].value,
+
"dirtyrate.vcpu.%d.megabytes_per_second",
+ info.rates[i].index) < 0)
+ return -1;
+ }
+ }
+ }
+
return 0;
}
diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h
index 053479b..2c0eed5 100644
--- a/src/qemu/qemu_monitor.h
+++ b/src/qemu/qemu_monitor.h
@@ -1553,6 +1553,12 @@ qemuMonitorStartDirtyRateCalc(qemuMonitor *mon,
int seconds,
qemuMonitorDirtyRateCalcMode mode);
+typedef struct _qemuMonitorDirtyRateVcpu qemuMonitorDirtyRateVcpu;
+struct _qemuMonitorDirtyRateVcpu {
+ int index; /* virtual cpu index */
This makes our syntax-check report an error, because it thinks that
'index' is used to access an array (which must then be type of size_t
because that's the only type which is guaranteed to be big enough to
address individual bytes in memory). Let me change the name to 'idx'.
+ unsigned long long value; /* virtual cpu dirty page rate in
MB/s */
+};
+
typedef struct _qemuMonitorDirtyRateInfo qemuMonitorDirtyRateInfo;
struct _qemuMonitorDirtyRateInfo {
int status; /* the status of last dirtyrate calculation,
@@ -1560,6 +1566,10 @@ struct _qemuMonitorDirtyRateInfo {
int calcTime; /* the period of dirtyrate calculation */
long long startTime; /* the start time of dirtyrate calculation */
long long dirtyRate; /* the dirtyrate in MiB/s */
+ qemuMonitorDirtyRateCalcMode mode; /* calculation mode used in
+ last measurement */
+ size_t nvcpus; /* number of virtual cpu */
+ qemuMonitorDirtyRateVcpu *rates; /* array of dirty page rate */
};
int
diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
index da9a4d9..a07f8c9 100644
--- a/src/qemu/qemu_monitor_json.c
+++ b/src/qemu/qemu_monitor_json.c
@@ -8782,11 +8782,45 @@ VIR_ENUM_IMPL(qemuMonitorDirtyRateStatus,
"measured");
static int
+qemuMonitorJSONExtractVcpuDirtyRate(virJSONValue *data,
+ qemuMonitorDirtyRateInfo *info)
+{
+ size_t nvcpus;
+ int i;
Again, i has to be size_t.
+
+ nvcpus = virJSONValueArraySize(data);
+ info->nvcpus = nvcpus;
+ info->rates = g_new0(qemuMonitorDirtyRateVcpu, nvcpus);
+
+ for (i = 0; i < nvcpus; i++) {
+ virJSONValue *entry = virJSONValueArrayGet(data, i);
+ if (virJSONValueObjectGetNumberInt(entry, "id",
+ &info->rates[i].index) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("query-dirty-rate reply was missing 'id'
data"));
+ return -1;
+ }
+
+ if (virJSONValueObjectGetNumberUlong(entry, "dirty-rate",
+ &info->rates[i].value) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("query-dirty-rate reply was missing
'dirty-rate' data"));
+ return -1;
+ }
+ }
+
+ return 0;
+}
Michal
6:35 a.m.
On 2/20/22 14:28, huangy81(a)chinatelecom.cn wrote:
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
v6:
- rebase on mastr
- drop the commit [PATCH v5 1/9] in this patchset, post an extra
commit if needed in the future.
Please review, thanks !
Regards
Yong
v5:
- [PATCH v5 9/9]: Fix alignment error in qemuDomainGetStatsDirtyRate.
v4:
- Rebase the master
- [PATCH v4 1/9]: Refactor dirty page rate calculation status
implementation, display calc_status as string when
'virsh domstats --dirtyrate' api return.
- [PATCH v4 3/9]: Adjust the 'cap check' block before BeginJob().
- [PATCH v4 5/9]: Drop the virDomainDirtyRateCalcMode and introduce
internal enum qemuMonitorDirtyRateCalcMode instead.
- [PATCH v4 6/9]: Code clean.
- [PATCH v4 7/9]: Split qemu_driver logic of domdirtyrate-calc virsh
api into a separate commit.
- [PATCH v4 8/9]: Change the 'mode' parameter usage as --mode=[xxx|yyy],
code clean in qemuDomainStartDirtyRateCalc.
- [PATCH v4 9/9]: Display calc_mode as string and do code clean in
qemuMonitorJSONExtractDirtyRateInfo.
Thanks Michal and Peter for reviewing the previous versions, please review.
Regards
Yong
v3:
- Rebase the master
- [PATCH v2 2/6]: Fix the usage of virQEMUCapsGet
- [PATCH v2 4/6]: Fix the cleanup missed in qemuDomainStartDirtyRateCalc
- [PATCH v2 4/6]: Move all blocks below ACL check
- [PATCH v2 4/6]: Make the qemuMonitorJSONStartDirtyRateCalc cleaner by
merging the different case of qemuMonitorJSONMakeCommand
- [PATCH v2 4/6]: Code clean, make the error message not be line-broken
- [PATCH v2 5/6]: Abstract the enum definition into a standalone commit
- [PATCH v2 5/6]: Move the validations code above calculating flags block
- [PATCH v2 6/6]: Change the type of 'value' field to unsigned in
struct qemuMonitorDirtyRateVcpu
- [PATCH v2 6/6]: Rename the enum type qemuMonitorDirtyRateCalcMode to
virDomainDirtyRateCalcMode
- [PATCH v2 6/6]: Code clean, align the code in qemuDomainGetStatsDirtyRate
Thanks Peter for quick and precise response, please review.
Regards
Yong
v2:
Rebase master and fix confilicts with commit
"Introduce QEMU_CAPS_DEVICE_VIRTIO_MEM_PCI_PREALLOC"
Thanks !
v1:
This patchset introduce mode option as the supplement of
qemuDomainStartDirtyRateCalc api, add calc_mode for dirtyrate
statistics correspondingly.
Qemu add mode parameter for calc-dirty-rate command since >= 6.2.0,
either of these three mode "page-sampling, dirty-bitmap, dirty-ring"
can be specified when calculating dirty page rate.
Page sampling is the original mode and used as default mode.
Dirty bitmap mode use kvm log sync api to fetch the dirty-bitmap
and count the increased 1 bits number during measurement, thus,
calculate the dirty page rate.
Dirty ring mode use the dirty-ring mechanism implemented in Qemu
which can count the increased dirty page on virtual cpu granularity,
thus, calculate the per-vcpu dirty page rate.
These three calculation mode can be used in different scenarios, and
the dirty-bitmap, dirty-ring mode may be more accurate to a certain
degree. So maybe it's time to support the mode option for dirtyrate
calculation.
This series make main modifications as the following:
1. introduce QEMU_CAPS_CALC_DIRTY_RATE capability to probe
calc-dirty-rate command in case of failure since it just
introduced since >= 5.2.0
2. introduce QEMU_CAPS_DIRTYRATE_MODE capability to probe
mode option of calc-dirty-rate command in case of failure, same
as 1.
3. implement mode option support for dirtyrate calculation.
Please review, thanks !
Best Regards !
Hyman Huang(黄勇) (8):
qemu_capabilities: Introduce QEMU_CAPS_CALC_DIRTY_RATE capability
qemu_driver: Probe capability before calculating dirty page rate
qemu_capabilities: Introduce QEMU_CAPS_DIRTYRATE_MODE capability
include: Introduce virDomainDirtyRateCalcFlags
qemu_driver: Add mode parameter to qemuDomainStartDirtyRateCalc
qemu_driver: Extend flags parameter of virDomainStartDirtyRateCalc
virsh: Add mode option to domdirtyrate-calc virsh api
qemu_driver: Add calc_mode for dirtyrate statistics
docs/manpages/virsh.rst | 7 ++-
include/libvirt/libvirt-domain.h | 13 +++++
src/libvirt-domain.c | 18 +++++-
src/qemu/qemu_capabilities.c | 4 ++
src/qemu/qemu_capabilities.h | 2 +
src/qemu/qemu_driver.c | 56 ++++++++++++++++--
src/qemu/qemu_monitor.c | 5 +-
src/qemu/qemu_monitor.h | 27 ++++++++-
src/qemu/qemu_monitor_json.c | 69 ++++++++++++++++++++++-
src/qemu/qemu_monitor_json.h | 3 +-
tests/qemucapabilitiesdata/caps_5.2.0.aarch64.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.ppc64.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.riscv64.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.s390x.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.0.0.aarch64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.0.0.s390x.xml | 1 +
tests/qemucapabilitiesdata/caps_6.0.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.1.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.2.0.aarch64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.2.0.ppc64.xml | 2 +
tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml | 2 +
tests/qemucapabilitiesdata/caps_7.0.0.ppc64.xml | 2 +
tests/qemucapabilitiesdata/caps_7.0.0.x86_64.xml | 2 +
tools/virsh-completer-domain.c | 17 ++++++
tools/virsh-completer-domain.h | 4 ++
tools/virsh-domain.c | 42 +++++++++++++-
tools/virsh-domain.h | 9 +++
28 files changed, 278 insertions(+), 16 deletions(-)
Alright, all the issues I've found are trivial to fix before pushing.
Reviewed-by: Michal Privoznik <mprivozn(a)redhat.com>
and pushed. One more thing, do you think you can post a patch against
NEWS.rst to document this new feature?
Michal
6:58 a.m.
在 2022/2/21 20:35, Michal Prívozník 写道:
On 2/20/22 14:28, huangy81(a)chinatelecom.cn wrote:
> From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
>
> v6:
> - rebase on mastr
> - drop the commit [PATCH v5 1/9] in this patchset, post an extra
> commit if needed in the future.
>
> Please review, thanks !
>
> Regards
> Yong
>
> v5:
> - [PATCH v5 9/9]: Fix alignment error in qemuDomainGetStatsDirtyRate.
>
> v4:
> - Rebase the master
> - [PATCH v4 1/9]: Refactor dirty page rate calculation status
> implementation, display calc_status as string when
> 'virsh domstats --dirtyrate' api return.
> - [PATCH v4 3/9]: Adjust the 'cap check' block before BeginJob().
> - [PATCH v4 5/9]: Drop the virDomainDirtyRateCalcMode and introduce
> internal enum qemuMonitorDirtyRateCalcMode instead.
> - [PATCH v4 6/9]: Code clean.
> - [PATCH v4 7/9]: Split qemu_driver logic of domdirtyrate-calc virsh
> api into a separate commit.
> - [PATCH v4 8/9]: Change the 'mode' parameter usage as --mode=[xxx|yyy],
> code clean in qemuDomainStartDirtyRateCalc.
> - [PATCH v4 9/9]: Display calc_mode as string and do code clean in
> qemuMonitorJSONExtractDirtyRateInfo.
> Thanks Michal and Peter for reviewing the previous versions, please review.
>
> Regards
> Yong
>
> v3:
> - Rebase the master
> - [PATCH v2 2/6]: Fix the usage of virQEMUCapsGet
> - [PATCH v2 4/6]: Fix the cleanup missed in qemuDomainStartDirtyRateCalc
> - [PATCH v2 4/6]: Move all blocks below ACL check
> - [PATCH v2 4/6]: Make the qemuMonitorJSONStartDirtyRateCalc cleaner by
> merging the different case of qemuMonitorJSONMakeCommand
> - [PATCH v2 4/6]: Code clean, make the error message not be line-broken
> - [PATCH v2 5/6]: Abstract the enum definition into a standalone commit
> - [PATCH v2 5/6]: Move the validations code above calculating flags block
> - [PATCH v2 6/6]: Change the type of 'value' field to unsigned in
> struct qemuMonitorDirtyRateVcpu
> - [PATCH v2 6/6]: Rename the enum type qemuMonitorDirtyRateCalcMode to
> virDomainDirtyRateCalcMode
> - [PATCH v2 6/6]: Code clean, align the code in qemuDomainGetStatsDirtyRate
>
> Thanks Peter for quick and precise response, please review.
>
> Regards
>
> Yong
>
> v2:
> Rebase master and fix confilicts with commit
> "Introduce QEMU_CAPS_DEVICE_VIRTIO_MEM_PCI_PREALLOC"
>
> Thanks !
>
> v1:
> This patchset introduce mode option as the supplement of
> qemuDomainStartDirtyRateCalc api, add calc_mode for dirtyrate
> statistics correspondingly.
>
> Qemu add mode parameter for calc-dirty-rate command since >= 6.2.0,
> either of these three mode "page-sampling, dirty-bitmap, dirty-ring"
> can be specified when calculating dirty page rate.
>
> Page sampling is the original mode and used as default mode.
>
> Dirty bitmap mode use kvm log sync api to fetch the dirty-bitmap
> and count the increased 1 bits number during measurement, thus,
> calculate the dirty page rate.
>
> Dirty ring mode use the dirty-ring mechanism implemented in Qemu
> which can count the increased dirty page on virtual cpu granularity,
> thus, calculate the per-vcpu dirty page rate.
>
> These three calculation mode can be used in different scenarios, and
> the dirty-bitmap, dirty-ring mode may be more accurate to a certain
> degree. So maybe it's time to support the mode option for dirtyrate
> calculation.
>
> This series make main modifications as the following:
> 1. introduce QEMU_CAPS_CALC_DIRTY_RATE capability to probe
> calc-dirty-rate command in case of failure since it just
> introduced since >= 5.2.0
>
> 2. introduce QEMU_CAPS_DIRTYRATE_MODE capability to probe
> mode option of calc-dirty-rate command in case of failure, same
> as 1.
>
> 3. implement mode option support for dirtyrate calculation.
>
> Please review, thanks !
>
> Best Regards !
>
> Hyman Huang(黄勇) (8):
> qemu_capabilities: Introduce QEMU_CAPS_CALC_DIRTY_RATE capability
> qemu_driver: Probe capability before calculating dirty page rate
> qemu_capabilities: Introduce QEMU_CAPS_DIRTYRATE_MODE capability
> include: Introduce virDomainDirtyRateCalcFlags
> qemu_driver: Add mode parameter to qemuDomainStartDirtyRateCalc
> qemu_driver: Extend flags parameter of virDomainStartDirtyRateCalc
> virsh: Add mode option to domdirtyrate-calc virsh api
> qemu_driver: Add calc_mode for dirtyrate statistics
>
> docs/manpages/virsh.rst | 7 ++-
> include/libvirt/libvirt-domain.h | 13 +++++
> src/libvirt-domain.c | 18 +++++-
> src/qemu/qemu_capabilities.c | 4 ++
> src/qemu/qemu_capabilities.h | 2 +
> src/qemu/qemu_driver.c | 56 ++++++++++++++++--
> src/qemu/qemu_monitor.c | 5 +-
> src/qemu/qemu_monitor.h | 27 ++++++++-
> src/qemu/qemu_monitor_json.c | 69 ++++++++++++++++++++++-
> src/qemu/qemu_monitor_json.h | 3 +-
> tests/qemucapabilitiesdata/caps_5.2.0.aarch64.xml | 1 +
> tests/qemucapabilitiesdata/caps_5.2.0.ppc64.xml | 1 +
> tests/qemucapabilitiesdata/caps_5.2.0.riscv64.xml | 1 +
> tests/qemucapabilitiesdata/caps_5.2.0.s390x.xml | 1 +
> tests/qemucapabilitiesdata/caps_5.2.0.x86_64.xml | 1 +
> tests/qemucapabilitiesdata/caps_6.0.0.aarch64.xml | 1 +
> tests/qemucapabilitiesdata/caps_6.0.0.s390x.xml | 1 +
> tests/qemucapabilitiesdata/caps_6.0.0.x86_64.xml | 1 +
> tests/qemucapabilitiesdata/caps_6.1.0.x86_64.xml | 1 +
> tests/qemucapabilitiesdata/caps_6.2.0.aarch64.xml | 1 +
> tests/qemucapabilitiesdata/caps_6.2.0.ppc64.xml | 2 +
> tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml | 2 +
> tests/qemucapabilitiesdata/caps_7.0.0.ppc64.xml | 2 +
> tests/qemucapabilitiesdata/caps_7.0.0.x86_64.xml | 2 +
> tools/virsh-completer-domain.c | 17 ++++++
> tools/virsh-completer-domain.h | 4 ++
> tools/virsh-domain.c | 42 +++++++++++++-
> tools/virsh-domain.h | 9 +++
> 28 files changed, 278 insertions(+), 16 deletions(-)
>
Alright, all the issues I've found are trivial to fix before pushing.
Reviewed-by: Michal Privoznik <mprivozn(a)redhat.com>
and pushed. One more thing, do you think you can post a patch against
NEWS.rst to document this new feature?
Yes, i'm very glad to
Michal
--
Best regard
Hyman Huang(黄勇)
1041
days inactive
1042
days old
16 comments
3 participants
participants (3)
-
huangy81＠chinatelecom.cn -
Hyman Huang
-
Michal Prívozník