9:52 a.m.
Hi
I trying to set up a network configuration using libvirt
The setup is:
1. a VM using virtio using a tap device connected to a bridge device
2. on the host side eth0 added to the same bridge device(without ip)
using libvirt application (say virsh) I want to launch this set up:
virsh net-create for the second part
virsh create for the first part(tap, virtio, vm etc)
I can set the first part(vm, tap, virtio) using the domain xml
but I'm also interested in XMLing the second part and net-create it.
I tried but only suceeded in creating the bridge
Is it possible? am I missing somthing?
Thanks in advance
4:02 a.m.
On Tue, Jun 23, 2009 at 07:52:25AM -0700, Shahar Klein wrote:
Hi
I trying to set up a network configuration using libvirt
The setup is:
1. a VM using virtio using a tap device connected to a bridge device
2. on the host side eth0 added to the same bridge device(without ip)
using libvirt application (say virsh) I want to launch this set up:
virsh net-create for the second part
virsh create for the first part(tap, virtio, vm etc)
I can set the first part(vm, tap, virtio) using the domain xml
but I'm also interested in XMLing the second part and net-create it.
I tried but only suceeded in creating the bridge
Is it possible? am I missing somthing?
This isn't what the net-XXX commnads is for. The functionality you are
after is in process of being implemented and will appear as iface-XXX
commands (for host interface managment)
For more info about libvirt networking, read this page
http://wiki.libvirt.org/page/Networking
Daniel
--
|: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :|
|: http://libvirt.org -o- http://virt-manager.org -o- http://ovirt.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
4:16 a.m.
Thanks Daniel
Those iface-XXX commands
can I use them(partly) now?
or
where can I see their spec/xml template?
Thanks
Shahar
________________________________
From: Daniel P. Berrange <berrange(a)redhat.com>
To: Shahar Klein <shaharklein(a)yahoo.com>
Cc: libvir-list(a)redhat.com
Sent: Wednesday, June 24, 2009 12:02:59 PM
Subject: Re: [libvirt] hooking a physical nic to a bridge with net-create
On Tue, Jun 23, 2009 at 07:52:25AM -0700, Shahar Klein wrote:
Hi
I trying to set up a network configuration using libvirt
The setup is:
1. a VM using virtio using a tap device connected to a bridge device
2. on the host side eth0 added to the same bridge device(without ip)
using libvirt application (say virsh) I want to launch this set up:
virsh net-create for the second part
virsh create for the first part(tap, virtio, vm etc)
I can set the first part(vm, tap, virtio) using the domain xml
but I'm also interested in XMLing the second part and net-create it.
I tried but only suceeded in creating the bridge
Is it possible? am I missing somthing?
This isn't what the net-XXX commnads is for. The functionality you are
after is in process of being implemented and will appear as iface-XXX
commands (for host interface managment)
For more info about libvirt networking, read this page
http://wiki.libvirt.org/page/Networking
Daniel
--
|: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :|
|: http://libvirt.org -o- http://virt-manager.org -o- http://ovirt.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
12:20 p.m.
On 06/24/2009 05:16 AM, Shahar Klein wrote:
Those iface-XXX commands
can I use them(partly) now?
or
where can I see their spec/xml template?
Some parts of the code are committed to CVS, some parts have been
submitted to the list and ACKed, but not committed yet, still other bits
have been submitted for comments, but aren't yet ready to be committed.
So I guess the answer is "no" for now, but "yes" *very* soon ;-).
If you want to look at the patches yourself, search for "virInterface"
in the list archives.
The XML is also not yet stable (there's been a lot of discussion about
that during the last week). Currently, the XML for libvirt virInterface*
is identical to the XML used by libnetcf:
https://fedorahosted.org/netcf/
libvirt will be using netcf as the backend to implement all the
virInterface functions.
11:05 p.m.
I tried the virInterface that is already in 0.6.4
but got this:
libvir: error : this function is not supported by the hypervisor: virInterfaceDefineXML
ERROR virInterfaceDefineXML
Can I use netcf just to get the feeling of it?
I mean use netcf as an admin user
i.e. define an XML that for example say somthing like that:
"define tap device tap8 and vlan 3888 over bond1 and add these two to bridge
br12"
can I do that with netcf?
thanks again
shahar
________________________________
From: Laine Stump <laine(a)laine.org>
To: Shahar Klein <shaharklein(a)yahoo.com>
Cc: libvir-list(a)redhat.com
Sent: Wednesday, June 24, 2009 8:20:58 PM
Subject: Re: [libvirt] hooking a physical nic to a bridge with net-create
On 06/24/2009 05:16 AM, Shahar Klein wrote:
Those iface-XXX commands
can I use them(partly) now?
or
where can I see their spec/xml template?
Some parts of the code are committed to CVS, some parts have been submitted to the list
and ACKed, but not committed yet, still other bits have been submitted for comments, but
aren't yet ready to be committed. So I guess the answer is "no" for now, but
"yes" *very* soon ;-).
If you want to look at the patches yourself, search for "virInterface" in the
list archives.
The XML is also not yet stable (there's been a lot of discussion about that during the
last week). Currently, the XML for libvirt virInterface* is identical to the XML used by
libnetcf:
https://fedorahosted.org/netcf/
libvirt will be using netcf as the backend to implement all the virInterface functions.
4:16 a.m.
On Wed, Jun 24, 2009 at 09:05:40PM -0700, Shahar Klein wrote:
I tried the virInterface that is already in 0.6.4
but got this:
libvir: error : this function is not supported by the hypervisor: virInterfaceDefineXML
ERROR virInterfaceDefineXML
Can I use netcf just to get the feeling of it?
Of course, the code is available there..
https://fedorahosted.org/netcf/
We simply haven't finish plugging it into libvirt
I mean use netcf as an admin user
i.e. define an XML that for example say somthing like that:
"define tap device tap8 and vlan 3888 over bond1 and add these two to bridge
br12"
can I do that with netcf?
netcf doesn't concern itself with TAP devices - those are related to
guest domains. netcf does allow you to configure anything you would
traditionally do via /etc/sysconfig/network-scripts (or /etc/network
on Debian). So creating bridges on VLANs over bond devices, and
that kind of thing.
Daniel
--
|: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :|
|: http://libvirt.org -o- http://virt-manager.org -o- http://ovirt.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
11:39 p.m.
Correct me if I'm wrong but it seems that the vlan support is not in netcf yet...
________________________________
From: Daniel P. Berrange <berrange(a)redhat.com>
To: Shahar Klein <shaharklein(a)yahoo.com>
Cc: Laine Stump <laine(a)laine.org>; libvir-list(a)redhat.com
Sent: Thursday, June 25, 2009 12:16:47 PM
Subject: Re: [libvirt] hooking a physical nic to a bridge with net-create
On Wed, Jun 24, 2009 at 09:05:40PM -0700, Shahar Klein wrote:
I tried the virInterface that is already in 0.6.4
but got this:
libvir: error : this function is not supported by the hypervisor: virInterfaceDefineXML
ERROR virInterfaceDefineXML
Can I use netcf just to get the feeling of it?
Of course, the code is available there..
https://fedorahosted.org/netcf/
We simply haven't finish plugging it into libvirt
I mean use netcf as an admin user
i.e. define an XML that for example say somthing like that:
"define tap device tap8 and vlan 3888 over bond1 and add these two to bridge
br12"
can I do that with netcf?
netcf doesn't concern itself with TAP devices - those are related to
guest domains. netcf does allow you to configure anything you would
traditionally do via /etc/sysconfig/network-scripts (or /etc/network
on Debian). So creating bridges on VLANs over bond devices, and
that kind of thing.
Daniel
--
|: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :|
|: http://libvirt.org -o- http://virt-manager.org -o- http://ovirt.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
5625
days inactive
5631
days old
7 comments
4 participants
participants (4)
-
Daniel P. Berrange -
David Lutterkort -
Laine Stump -
Shahar Klein