4:32 a.m.
Erik Skultety (2):
ci: Switch to meson build system
ci: Drop env variables related to autotools and make
ci/Makefile | 29 ++++++-----------------------
ci/build.sh | 21 ++++++---------------
2 files changed, 12 insertions(+), 38 deletions(-)
--
2.26.2
4:32 a.m.
New subject: [libvirt PATCH 1/2] ci: Switch to meson build system
First add the meson required bits to be able to run the build.
NOTE: inspired by our gitlab-ci.yml
Signed-off-by: Erik Skultety <eskultet(a)redhat.com>
---
ci/Makefile | 18 ++++++------------
ci/build.sh | 21 ++++++---------------
2 files changed, 12 insertions(+), 27 deletions(-)
diff --git a/ci/Makefile b/ci/Makefile
index c7c8eb9a45..d3f14156c5 100644
--- a/ci/Makefile
+++ b/ci/Makefile
@@ -35,11 +35,8 @@ CI_CONFIGURE = $(CI_CONT_SRCDIR)/configure
# Default to using all possible CPUs
CI_SMP = $(shell getconf _NPROCESSORS_ONLN)
-# Any extra arguments to pass to make
-CI_MAKE_ARGS =
-
-# Any extra arguments to pass to configure
-CI_CONFIGURE_ARGS =
+# Any extra arguments to pass to ninja
+CI_NINJA_ARGS =
# Script containing environment preparation steps
CI_PREPARE_SCRIPT = $(CI_ROOTDIR)/prepare.sh
@@ -224,9 +221,7 @@ ci-run-command@%: ci-prepare-tree
CI_CONT_SRCDIR="$(CI_CONT_SRCDIR)" \
CI_CONT_BUILDDIR="$(CI_CONT_BUILDDIR)" \
CI_SMP="$(CI_SMP)" \
- CI_CONFIGURE="$(CI_CONFIGURE)" \
- CI_CONFIGURE_ARGS="$(CI_CONFIGURE_ARGS)" \
- CI_MAKE_ARGS="$(CI_MAKE_ARGS)" \
+ CI_NINJA_ARGS="$(CI_NINJA_ARGS" \
$(CI_COMMAND) || exit 1'
@test "$(CI_CLEAN)" = "1" && rm -rf $(CI_SCRATCHDIR) || :
@@ -236,8 +231,8 @@ ci-shell@%:
ci-build@%:
$(MAKE) -C $(CI_ROOTDIR) ci-run-command@$* CI_COMMAND="$(CI_USER_HOME)/build"
-ci-check@%:
- $(MAKE) -C $(CI_ROOTDIR) ci-build@$* CI_MAKE_ARGS="check"
+ci-test@%:
+ $(MAKE) -C $(CI_ROOTDIR) ci-build@$* CI_NINJA_ARGS=test
ci-list-images:
@echo
@@ -266,6 +261,5 @@ ci-help:
@echo " CI_CLEAN=0 - do not delete '$(CI_SCRATCHDIR)' after
completion"
@echo " CI_REUSE=1 - re-use existing '$(CI_SCRATCHDIR)'
content"
@echo " CI_ENGINE=auto - container engine to use (podman, docker)"
- @echo " CI_CONFIGURE_ARGS= - extra arguments passed to configure"
- @echo " CI_MAKE_ARGS= - extra arguments passed to make, e.g. space
delimited list of targets"
+ @echo " CI_NINJA_ARGS= - extra arguments passed to ninja"
@echo
diff --git a/ci/build.sh b/ci/build.sh
index 2da84c080a..154b73917d 100644
--- a/ci/build.sh
+++ b/ci/build.sh
@@ -7,26 +7,17 @@
#
# to make.
-mkdir -p "$CI_CONT_BUILDDIR" || exit 1
-cd "$CI_CONT_BUILDDIR"
+mkdir -p "$CI_CONT_SRCDIR" || exit 1
+cd "$CI_CONT_SRCDIR"
export VIR_TEST_DEBUG=1
-NOCONFIGURE=1 "$CI_CONT_SRCDIR/autogen.sh" || exit 1
-# $CONFIGURE_OPTS is a env that can optionally be set in the container,
-# populated at build time from the Dockerfile. A typical use case would
-# be to pass --host/--target args to trigger cross-compilation
-#
-# This can be augmented by make local args in $CI_CONFIGURE_ARGS
-"$CI_CONFIGURE" $CONFIGURE_OPTS $CI_CONFIGURE_ARGS
-if test $? != 0; then
- test -f config.log && cat config.log
- exit 1
-fi
+meson build --werror || (cat build/meson-logs/meson-log.txt && exit 1)
+ninja -C build "$CI_NINJA_ARGS"
+ninja -C build
+
find -name test-suite.log -delete
-make -j"$CI_SMP" $CI_MAKE_ARGS
-
if test $? != 0; then \
LOGS=$(find -name test-suite.log)
if test "$LOGS"; then
--
2.26.2
4:37 a.m.
New subject: [libvirt PATCH 1/2] ci: Switch to meson build system
On Mon, Nov 09, 2020 at 11:32:45AM +0100, Erik Skultety wrote:
First add the meson required bits to be able to run the build.
NOTE: inspired by our gitlab-ci.yml
Signed-off-by: Erik Skultety <eskultet(a)redhat.com>
---
ci/Makefile | 18 ++++++------------
ci/build.sh | 21 ++++++---------------
2 files changed, 12 insertions(+), 27 deletions(-)
diff --git a/ci/Makefile b/ci/Makefile
index c7c8eb9a45..d3f14156c5 100644
--- a/ci/Makefile
+++ b/ci/Makefile
@@ -35,11 +35,8 @@ CI_CONFIGURE = $(CI_CONT_SRCDIR)/configure
# Default to using all possible CPUs
CI_SMP = $(shell getconf _NPROCESSORS_ONLN)
-# Any extra arguments to pass to make
-CI_MAKE_ARGS =
-
-# Any extra arguments to pass to configure
-CI_CONFIGURE_ARGS =
+# Any extra arguments to pass to ninja
+CI_NINJA_ARGS =
# Script containing environment preparation steps
CI_PREPARE_SCRIPT = $(CI_ROOTDIR)/prepare.sh
@@ -224,9 +221,7 @@ ci-run-command@%: ci-prepare-tree
CI_CONT_SRCDIR="$(CI_CONT_SRCDIR)" \
CI_CONT_BUILDDIR="$(CI_CONT_BUILDDIR)" \
CI_SMP="$(CI_SMP)" \
- CI_CONFIGURE="$(CI_CONFIGURE)" \
- CI_CONFIGURE_ARGS="$(CI_CONFIGURE_ARGS)" \
- CI_MAKE_ARGS="$(CI_MAKE_ARGS)" \
+ CI_NINJA_ARGS="$(CI_NINJA_ARGS" \
$(CI_COMMAND) || exit 1'
@test "$(CI_CLEAN)" = "1" && rm -rf $(CI_SCRATCHDIR) || :
@@ -236,8 +231,8 @@ ci-shell@%:
ci-build@%:
$(MAKE) -C $(CI_ROOTDIR) ci-run-command@$*
CI_COMMAND="$(CI_USER_HOME)/build"
-ci-check@%:
- $(MAKE) -C $(CI_ROOTDIR) ci-build@$* CI_MAKE_ARGS="check"
+ci-test@%:
+ $(MAKE) -C $(CI_ROOTDIR) ci-build@$* CI_NINJA_ARGS=test
ci-list-images:
@echo
@@ -266,6 +261,5 @@ ci-help:
@echo " CI_CLEAN=0 - do not delete '$(CI_SCRATCHDIR)' after
completion"
@echo " CI_REUSE=1 - re-use existing '$(CI_SCRATCHDIR)'
content"
@echo " CI_ENGINE=auto - container engine to use (podman, docker)"
- @echo " CI_CONFIGURE_ARGS= - extra arguments passed to configure"
- @echo " CI_MAKE_ARGS= - extra arguments passed to make, e.g. space
delimited list of targets"
+ @echo " CI_NINJA_ARGS= - extra arguments passed to ninja"
@echo
diff --git a/ci/build.sh b/ci/build.sh
index 2da84c080a..154b73917d 100644
--- a/ci/build.sh
+++ b/ci/build.sh
@@ -7,26 +7,17 @@
#
# to make.
-mkdir -p "$CI_CONT_BUILDDIR" || exit 1
-cd "$CI_CONT_BUILDDIR"
+mkdir -p "$CI_CONT_SRCDIR" || exit 1
+cd "$CI_CONT_SRCDIR"
export VIR_TEST_DEBUG=1
-NOCONFIGURE=1 "$CI_CONT_SRCDIR/autogen.sh" || exit 1
-# $CONFIGURE_OPTS is a env that can optionally be set in the container,
-# populated at build time from the Dockerfile. A typical use case would
-# be to pass --host/--target args to trigger cross-compilation
-#
-# This can be augmented by make local args in $CI_CONFIGURE_ARGS
-"$CI_CONFIGURE" $CONFIGURE_OPTS $CI_CONFIGURE_ARGS
-if test $? != 0; then
- test -f config.log && cat config.log
- exit 1
-fi
+meson build --werror || (cat build/meson-logs/meson-log.txt && exit 1)
We need to honour "$MESON_OPTS" which is set in containers that are
providing a cross-build envrionment. We should also honour a
$CI_MESON_ARGS to let users pass overrides as before.
+ninja -C build "$CI_NINJA_ARGS"
+ninja -C build
+
find -name test-suite.log -delete
Regards,
Daniel
--
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org -o- https://fstop138.berrange.com :|
|: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
5:21 a.m.
New subject: [libvirt PATCH 1/2] ci: Switch to meson build system
...
> -# $CONFIGURE_OPTS is a env that can optionally be set in the
container,
> -# populated at build time from the Dockerfile. A typical use case would
> -# be to pass --host/--target args to trigger cross-compilation
> -#
> -# This can be augmented by make local args in $CI_CONFIGURE_ARGS
> -"$CI_CONFIGURE" $CONFIGURE_OPTS $CI_CONFIGURE_ARGS
> -if test $? != 0; then
> - test -f config.log && cat config.log
> - exit 1
> -fi
> +meson build --werror || (cat build/meson-logs/meson-log.txt && exit 1)
We need to honour "$MESON_OPTS" which is set in containers that are
providing a cross-build envrionment. We should also honour a
$CI_MESON_ARGS to let users pass overrides as before.
Oops, good point.
Erik
4:41 a.m.
New subject: [libvirt PATCH 1/2] ci: Switch to meson build system
On Mon, Nov 09, 2020 at 11:32:45AM +0100, Erik Skultety wrote:
First add the meson required bits to be able to run the build.
NOTE: inspired by our gitlab-ci.yml
Signed-off-by: Erik Skultety <eskultet(a)redhat.com>
---
ci/Makefile | 18 ++++++------------
ci/build.sh | 21 ++++++---------------
2 files changed, 12 insertions(+), 27 deletions(-)
diff --git a/ci/Makefile b/ci/Makefile
index c7c8eb9a45..d3f14156c5 100644
--- a/ci/Makefile
+++ b/ci/Makefile
@@ -35,11 +35,8 @@ CI_CONFIGURE = $(CI_CONT_SRCDIR)/configure
# Default to using all possible CPUs
CI_SMP = $(shell getconf _NPROCESSORS_ONLN)
-# Any extra arguments to pass to make
-CI_MAKE_ARGS =
-
-# Any extra arguments to pass to configure
-CI_CONFIGURE_ARGS =
+# Any extra arguments to pass to ninja
+CI_NINJA_ARGS =
# Script containing environment preparation steps
CI_PREPARE_SCRIPT = $(CI_ROOTDIR)/prepare.sh
@@ -224,9 +221,7 @@ ci-run-command@%: ci-prepare-tree
CI_CONT_SRCDIR="$(CI_CONT_SRCDIR)" \
CI_CONT_BUILDDIR="$(CI_CONT_BUILDDIR)" \
CI_SMP="$(CI_SMP)" \
- CI_CONFIGURE="$(CI_CONFIGURE)" \
- CI_CONFIGURE_ARGS="$(CI_CONFIGURE_ARGS)" \
- CI_MAKE_ARGS="$(CI_MAKE_ARGS)" \
+ CI_NINJA_ARGS="$(CI_NINJA_ARGS" \
missing parenthesis ^ (consider it squashed)
$(CI_COMMAND) || exit 1'
@test "$(CI_CLEAN)" = "1" && rm -rf $(CI_SCRATCHDIR) || :
@@ -236,8 +231,8 @@ ci-shell@%:
ci-build@%:
$(MAKE) -C $(CI_ROOTDIR) ci-run-command@$*
CI_COMMAND="$(CI_USER_HOME)/build"
-ci-check@%:
- $(MAKE) -C $(CI_ROOTDIR) ci-build@$* CI_MAKE_ARGS="check"
+ci-test@%:
+ $(MAKE) -C $(CI_ROOTDIR) ci-build@$* CI_NINJA_ARGS=test
ci-list-images:
@echo
@@ -266,6 +261,5 @@ ci-help:
@echo " CI_CLEAN=0 - do not delete '$(CI_SCRATCHDIR)' after
completion"
@echo " CI_REUSE=1 - re-use existing '$(CI_SCRATCHDIR)'
content"
@echo " CI_ENGINE=auto - container engine to use (podman, docker)"
- @echo " CI_CONFIGURE_ARGS= - extra arguments passed to configure"
- @echo " CI_MAKE_ARGS= - extra arguments passed to make, e.g. space
delimited list of targets"
+ @echo " CI_NINJA_ARGS= - extra arguments passed to ninja"
@echo
diff --git a/ci/build.sh b/ci/build.sh
index 2da84c080a..154b73917d 100644
--- a/ci/build.sh
+++ b/ci/build.sh
@@ -7,26 +7,17 @@
#
# to make.
-mkdir -p "$CI_CONT_BUILDDIR" || exit 1
-cd "$CI_CONT_BUILDDIR"
+mkdir -p "$CI_CONT_SRCDIR" || exit 1
+cd "$CI_CONT_SRCDIR"
export VIR_TEST_DEBUG=1
-NOCONFIGURE=1 "$CI_CONT_SRCDIR/autogen.sh" || exit 1
-# $CONFIGURE_OPTS is a env that can optionally be set in the container,
-# populated at build time from the Dockerfile. A typical use case would
-# be to pass --host/--target args to trigger cross-compilation
-#
-# This can be augmented by make local args in $CI_CONFIGURE_ARGS
-"$CI_CONFIGURE" $CONFIGURE_OPTS $CI_CONFIGURE_ARGS
-if test $? != 0; then
- test -f config.log && cat config.log
- exit 1
-fi
+meson build --werror || (cat build/meson-logs/meson-log.txt && exit 1)
+ninja -C build "$CI_NINJA_ARGS"
+ninja -C build
and ^this extra ninja invocation dropped
+
find -name test-suite.log -delete
-make -j"$CI_SMP" $CI_MAKE_ARGS
-
if test $? != 0; then \
LOGS=$(find -name test-suite.log)
if test "$LOGS"; then
--
2.26.2
4:32 a.m.
New subject: [libvirt PATCH 2/2] ci: Drop env variables related to autotools and make
Previous patch switched the build to meson which supports only
out-of-tree builds, so these variables are no longer needed.
Signed-off-by: Erik Skultety <eskultet(a)redhat.com>
---
ci/Makefile | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/ci/Makefile b/ci/Makefile
index d3f14156c5..14a51dcb45 100644
--- a/ci/Makefile
+++ b/ci/Makefile
@@ -20,15 +20,6 @@ CI_HOST_SRCDIR = $(CI_SCRATCHDIR)/src
# the $(CI_HOST_SRCDIR) directory from the host
CI_CONT_SRCDIR = $(CI_USER_HOME)/libvirt
-# Relative directory to perform the build in. This
-# defaults to using a separate build dir, but can be
-# set to empty string for an in-source tree build.
-CI_VPATH = build
-
-# The directory holding the build output inside the
-# container.
-CI_CONT_BUILDDIR = $(CI_CONT_SRCDIR)/$(CI_VPATH)
-
# Can be overridden with mingw{32,64}-configure if desired
CI_CONFIGURE = $(CI_CONT_SRCDIR)/configure
@@ -217,9 +208,7 @@ ci-run-command@%: ci-prepare-tree
--login \
--user="#$(CI_UID)" \
--group="#$(CI_GID)" \
- CONFIGURE_OPTS="$$CONFIGURE_OPTS" \
CI_CONT_SRCDIR="$(CI_CONT_SRCDIR)" \
- CI_CONT_BUILDDIR="$(CI_CONT_BUILDDIR)" \
CI_SMP="$(CI_SMP)" \
CI_NINJA_ARGS="$(CI_NINJA_ARGS" \
$(CI_COMMAND) || exit 1'
--
2.26.2
1474
days inactive
1474
days old
5 comments
2 participants
participants (2)
-
Daniel P. Berrangé -
Erik Skultety