10:29 p.m.
From: Daniel P. Berrange <berrange(a)redhat.com>
---
docs/Makefile.am | 11 +-
docs/internals.html.in | 9 +
docs/internals/command.html.in | 491 ++++++++++++++++++++++++++++++++++++++++
docs/sitemap.html.in | 4 +
docs/subsite.xsl | 25 ++
5 files changed, 539 insertions(+), 1 deletions(-)
create mode 100644 docs/internals/command.html.in
create mode 100644 docs/subsite.xsl
diff --git a/docs/Makefile.am b/docs/Makefile.am
index b28e04e..ce0b391 100644
--- a/docs/Makefile.am
+++ b/docs/Makefile.am
@@ -60,7 +60,8 @@ gif = \
architecture.gif \
node.gif
-dot_html_in = $(notdir $(wildcard $(srcdir)/*.html.in)) todo.html.in
+dot_html_in = $(notdir $(wildcard $(srcdir)/*.html.in)) todo.html.in \
+ $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/internals/*.html.in))
dot_html = $(dot_html_in:%.html.in=%.html)
patches = $(wildcard api_extension/*.patch)
@@ -113,6 +114,14 @@ todo:
%.png: %.fig
convert -rotate 90 $< $@
+internals/%.html.tmp: internals/%.html.in subsite.xsl page.xsl sitemap.html.in
+ @if [ -x $(XSLTPROC) ] ; then \
+ echo "Generating $@"; \
+ name=`echo $@ | sed -e 's/.tmp//'`; \
+ $(XSLTPROC) --stringparam pagename $$name --nonet --html \
+ $(top_srcdir)/docs/subsite.xsl $< > $@ \
+ || { rm $@ && exit 1; }; fi
+
%.html.tmp: %.html.in site.xsl page.xsl sitemap.html.in
@if [ -x $(XSLTPROC) ] ; then \
echo "Generating $@"; \
diff --git a/docs/internals.html.in b/docs/internals.html.in
index d39098e..dc88eab 100644
--- a/docs/internals.html.in
+++ b/docs/internals.html.in
@@ -7,5 +7,14 @@
internals, adding new public APIs, new hypervisor drivers or extending
the libvirtd daemon code.
</p>
+
+ <ul>
+ <li>Introduction to basic rules and guidelines for <a
href="hacking.html">hacking<a>
+ on libvirt code</li>
+ <li>Guide to adding <a href="api_extension.html">public
APIs<a></li>
+ <li>Approach for <a href="internals/command.html">spawning
commands</a> from
+ libvirt driver code</li>
+ </ul>
+
</body>
</html>
diff --git a/docs/internals/command.html.in b/docs/internals/command.html.in
new file mode 100644
index 0000000..3d28cd4
--- /dev/null
+++ b/docs/internals/command.html.in
@@ -0,0 +1,491 @@
+<html>
+ <body>
+ <h1>Spawning processes / commands from libvirt drivers</h1>
+
+ <ul id="toc"></ul>
+
+ <p>
+ This page describes the usage of libvirt APIs for
+ spawning processes / commands from libvirt drivers.
+ All code is required to use these APIs
+ </p>
+
+ <h2><a name="posix">Problems with standard POSIX
APIs</a></h2>
+
+ <p>
+ The POSIX specification includes a number of APIs for
+ spawning processes / commands, but they suffer from
+ a number of flaws
+ </p>
+
+ <ul>
+ <li><code>fork+exec</code>: The lowest & most flexible
+ level, but very hard to use correctly / safely. It
+ is easy to leak file descriptors, have unexpected
+ signal handler behaviour and not handle edge cases.
+ Furthermore, it is not portable to mingw.
+ </li>
+ <li><code>system</code>: Convenient if you don't care
+ about capturing command output, but has the serious
+ downside that the command string is interpreted by
+ the shell. This makes it very dangerous to use, because
+ improperly validated user input can lead to exploits
+ via shell meta characters.
+ </li>
+ <li><code>popen</code>: Inherits the flaws of
+ <code>system</code>, and has no option for bi-directional
+ communication.
+ </li>
+ <li><code>posix_spawn</code>: A half-way house between
+ simplicity of system() and the flexibility of fork+exec.
+ It does not allow for a couple of important features
+ though, such as running a hook between the fork+exec
+ stage, or closing all open file descriptors.</li>
+ </ul>
+
+ <p>
+ Due to the problems mentioned with each of these,
+ libvirt driver code <strong>must not use</strong> any
+ of the above APIs. Historically libvirt provided a
+ higher level API known as virExec. This was wrapper
+ around fork+exec, in a similar style to posix_spawn,
+ but with a few more features.
+ </p>
+
+ <p>
+ This wrapper still suffered from a number of problems.
+ Handling command cleanup via waitpid() is overly
+ complex & error prone for most usage. Building up the
+ argv[] + env[] string arrays is quite cumbersome and
+ error prone, particularly wrt memory leak / OOM handling.
+ </p>
+
+ <h2><a name="api">The libvirt command execution
API</a></h2>
+
+ <p>
+ There is now a high level API that provides a safe and
+ flexible way to spawn commands, which prevents the most
+ common errors & is easy to code against. This
+ code is provided in the <code>src/util/command.h</code>
+ header which can be imported using <code>#include
"command.h"</code>
+ </p>
+
+ <h3><a name="initial">Defining commands in
libvirt</a></h3>
+
+ <p>
+ The first step is to declare what command is to be
+ executed. The command name can be either a fully
+ qualified path, or a bare command name. In the latter
+ case it will be resolved wrt the <code>$PATH</code>
+ environment variable.
+ </p>
+
+<pre>
+ virCommandPtr cmd = virCommandNew("/usr/bin/dnsmasq");
+</pre>
+
+ <p>
+ There is no need to check for allocation failure after
+ <code>virCommandNew</code>. This will be detected and
+ reported at a later time.
+ </p>
+
+ <h3><a name="args">Adding arguments to the
command</a></h3>
+
+ <p>
+ There are a number of APIs for adding arguments to a
+ command. To add a direct string arg
+ </p>
+
+<pre>
+ virCommandAddArg(cmd, "-strict-order");
+</pre>
+
+ <p>
+ If an argument takes an attached value of the form
+ <code>-arg=val</code>, then this can be done using
+ </p>
+
+<pre>
+ virCommandAddArgPair(cmd, "--conf-file", "/etc/dnsmasq.conf");
+</pre>
+
+ <p>
+ To add a entire NULL terminated array of arguments in one go,
+ there are two options.
+ </p>
+
+<pre>
+ const char *const args[] = {
+ "--strict-order", "--except-interface", "lo", NULL
+ };
+ virCommandAddArgSet(cmd, args);
+ virCommandAddArgList(cmd, "--domain", "localdomain", NULL);
+</pre>
+
+ <p>
+ This latter option can also be used at time of initial
+ construction of the <code>virCommandPtr</code> object
+ </p>
+
+<pre>
+ const char *const args[] = {
+ "/usr/bin/dnsmasq",
+ "--strict-order", "--except-interface",
+ "lo", "--domain", "localdomain", NULL
+ };
+ virCommandPtr cmd = virCommandNewArgs(cmd, args);
+</pre>
+
+ <h3><a name="env">Setting up the
environment</a></h3>
+
+ <p>
+ By default a command will inherit all environment variables
+ from the current process. Generally this is not desirable
+ and a customized environment will be more suitable. Any
+ customization done via the following APIs will prevent
+ inheritance of any existing environment variables unless
+ explicitly allowed. The first step is usually to pass through
+ a small number of variables from the current process.
+ </p>
+
+<pre>
+ virCommandAddEnvPassCommon(cmd);
+</pre>
+
+ <p>
+ This has now set up a clean environment for the child, passing
+ through <code>PATH</code>, <code>LD_PRELOAD</code>,
+ <code>LD_LIBRARY_PATH</code>, <code>HOME</code>,
+ <code>USER</code>, <code>LOGNAME</code> and
<code>TMPDIR</code>.
+ Furthermore it will explicitly set <code>LC_ALL=C</code> to
+ avoid unexpected localization of command output. Further
+ variables can be passed through from parent explicitly:
+ </p>
+
+<pre>
+ virCommandAddEnvPass(cmd, "DISPLAY");
+ virCommandAddEnvPass(cmd, "XAUTHORITY");
+</pre>
+
+ <p>
+ To define an environment variable in the child with an
+ separate key / value:
+ </p>
+
+<pre>
+ virCommandAddEnvPair(cmd, "TERM", "xterm");
+</pre>
+
+ <p>
+ If the key/value pair is pre-formatted in the right
+ format, it can be set directly
+ </p>
+
+<pre>
+ virCommandAddEnvString(cmd, "TERM=xterm");
+</pre>
+
+ <h3><a name="misc">Miscellaneous other
options</a></h3>
+
+ <p>
+ Normally the spawned command will retain the current
+ process and process group as its parent. If the current
+ process dies, the child will then (usually) be terminated
+ too. If this cleanup is not desired, then the command
+ should be marked as daemonized:
+ </p>
+
+<pre>
+ virCommandDaemonize(cmd);
+</pre>
+
+ <p>
+ When daemonizing a command, the PID visible from the
+ caller will be that of the intermediate process, not
+ the actual damonized command. If the PID of the real
+ command is required then a pidfile can be requested
+ </p>
+
+<pre>
+ virCommandSetPidFile(cmd, "/var/run/dnsmasq.pid");
+</pre>
+
+ <p>
+ This PID file is guaranteed to be written before
+ the intermediate process exits.
+ </p>
+
+ <h3><a name="privs">Reducing command
privileges</a></h3>
+
+ <p>
+ Normally a command will inherit all privileges of
+ the current process. To restrict what a command can
+ do, it is possible to request that all its capabilities
+ are cleared. With this done it will only be able to
+ access resources for which it has explicit DAC permissions
+ </p>
+
+<pre>
+ virCommandClearCaps(cmd);
+</pre>
+
+ <h3><a name="fds">Managing file handles</a></h3>
+
+ <p>
+ To prevent unintended resource leaks to child processes,
+ all open file handles will be closed in the child, and
+ its stdin/out/err all connected to <code>/dev/null</code>.
+ It is possible to allow an open file handle to be passed
+ into the child:
+ </p>
+
+<pre>
+ virCommandPreserveFD(cmd, 5);
+</pre>
+
+ <p>
+ With this file descriptor 5 in the current process remains
+ open as file descriptor 5 in the child. For stdin/out/err
+ it is usually necessary to map a file handle. To attach
+ file descriptor 7 in the current process to stdin in the
+ child:
+ </p>
+
+<pre>
+ virCommandSetInputFD(cmd, 7);
+</pre>
+
+ <p>
+ Equivalently to redirect stdout or stderr in the child,
+ pass in a pointer to the desired handle
+ </p>
+
+<pre>
+ int outfd = open("out.log", "w+");
+ int errfd = open("err.log", "w+");
+ virCommandSetOutputFD(cmd, &outfd);
+ virCommandSetErrorFD(cmd, &errfd);
+</pre>
+
+ <p>
+ Alternatively it is possible to request that a pipe be
+ created to fetch stdout/err in the parent, by initializing
+ the FD to -1.
+ </p>
+
+<pre>
+ int outfd = -1;
+ int errfd = -1
+ virCommandSetOutputFD(cmd, &outfd);
+ virCommandSetErrorFD(cmd, &errfd);
+</pre>
+
+ <p>
+ Once the command is running, <code>outfd</code>
+ and <code>errfd</code> will be initialized with
+ valid file handles that can be read from.
+ </p>
+
+ <h3><a name="buffers">Feeding & capturing strings
to/from the child</a></h3>
+
+ <p>
+ Often dealing with file handles for stdin/out/err
+ is unnecessarily complex. It is possible to specify
+ a string buffer to act as the data source for the
+ child's stdin, if there are no embedded NUL bytes
+ </p>
+
+<pre>
+ const char *input = "Hello World\n";
+ virCommandSetInputBuffer(cmd, input);
+</pre>
+
+ <p>
+ Similarly it is possible to request that the child's
+ stdout/err be redirected into a string buffer, if the
+ output is not expected to contain NUL bytes
+ </p>
+
+<pre>
+ char *output = NULL, *errors = NULL;
+ virCommandSetOutputBuffer(cmd, &output);
+ virCommandSetErrorBuffer(cmd, &errors);
+</pre>
+
+ <p>
+ Once the command has finished executing, these buffers
+ will contain the output. It is the callers responsibility
+ to free these buffers.
+ </p>
+
+ <h3><a name="directory">Setting working
directory</a></h3>
+
+ <p>
+ Daemonized commands are always run with "/" as the current
+ working directory. All other commands default to running in the
+ same working directory as the parent process, but an alternate
+ directory can be specified:
+ </p>
+
+<pre>
+ virCommandSetWorkingDirectory(cmd, LOCALSTATEDIR);
+</pre>
+
+ <h3><a name="hooks">Any additional hooks</a></h3>
+
+ <p>
+ If anything else is needed, it is possible to request a hook
+ function that is called in the child after the fork, as the
+ last thing before changing directories, dropping capabilities,
+ and executing the new process. If hook(opaque) returns
+ non-zero, then the child process will not be run.
+ </p>
+
+<pre>
+ virCommandSetPreExecHook(cmd, hook, opaque);
+</pre>
+
+ <h3><a name="sync">Running commands
synchronously</a></h3>
+
+ <p>
+ For most commands, the desired behaviour is to spawn
+ the command, wait for it to complete & exit and then
+ check that its exit status is zero
+ </p>
+
+<pre>
+ if (virCommandRun(cmd, NULL) < 0)
+ return -1;
+</pre>
+
+ <p>
+ <strong>Note:</strong> if the command has been daemonized
+ this will only block & wait for the intermediate process,
+ not the real command. <code>virCommandRun</code> will
+ report on any errors that have occured upon this point
+ with all previous API calls. If the command fails to
+ run, or exits with non-zero status an error will be
+ reported via normal libvirt error infrastructure. If a
+ non-zero exit status can represent a success condition,
+ it is possible to request the exit status and perform
+ that check manually instead of letting <code>virCommandRun</code>
+ raise the error
+ </p>
+
+<pre>
+ int status;
+ if (virCommandRun(cmd, &status) < 0)
+ return -1;
+
+ if (WEXITSTATUS(status) ...) {
+ ...do stuff...
+ }
+</pre>
+
+ <h3><a name="async">Running commands
asynchronously</a></h3>
+
+ <p>
+ In certain complex scenarios, particularly special
+ I/O handling is required for the child's stdin/err/out
+ it will be necessary to run the command asynchronously
+ and wait for completion separately.
+ </p>
+
+<pre>
+ pid_t pid;
+ if (virCommandRunAsync(cmd, &pid) < 0)
+ return -1;
+
+ ... do something while pid is running ...
+
+ int status;
+ if (virCommandWait(cmd, &status) < 0)
+ return -1;
+
+ if (WEXITSTATUS(status)...) {
+ ..do stuff..
+ }
+</pre>
+
+ <p>
+ As with <code>virCommandRun</code>, the
<code>status</code>
+ arg for <code>virCommandWait</code> can be omitted, in which
+ case it will validate that exit status is zero and raise an
+ error if not.
+ </p>
+
+
+ <h3><a name="release">Releasing resources</a></h3>
+
+ <p>
+ Once the command has been executed, or if execution
+ has been abandoned, it is necessary to release
+ resources associated with the <code>virCommandPtr</code>
+ object. This is done with:
+ </p>
+
+<pre>
+ virCommandFree(cmd);
+</pre>
+
+ <p>
+ There is no need to check if <code>cmd</code> is NULL
+ before calling <code>virCommandFree</code>. This scenario
+ is handled automatically. If the command is still running,
+ it will be forcably killed and cleaned up (via waitpid).
+ </p>
+
+ <h2><a name="example">Complete examples</a></h2>
+
+ <p>
+ This shows a complete example usage of the APIs roughly
+ using the libvirt source src/util/hooks.c
+ </p>
+
+<pre>
+int runhook(const char *drvstr, const char *id,
+ const char *opstr, const char *subopstr,
+ const char *extra) {
+ int ret;
+ char *path;
+ virCommandPtr cmd;
+
+ ret = virBuildPath(&path, LIBVIRT_HOOK_DIR, drvstr);
+ if ((ret < 0) || (path == NULL)) {
+ virHookReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Failed to build path for %s hook"),
+ drvstr);
+ return -1;
+ }
+
+ cmd = virCommandNew(path);
+ VIR_FREE(path);
+
+ virCommandAddEnvPassCommon(cmd);
+
+ virCommandAddArgList(cmd, id, opstr, subopstr, extra, NULL);
+
+ virCommandSetInputBuffer(cmd, input);
+
+ ret = virCommandRun(cmd, NULL);
+
+ virCommandFree(cmd);
+
+ return ret;
+}
+</pre>
+
+ <p>
+ In this example, the command is being run synchronously.
+ A pre-formatted string is being fed to the command as
+ its stdin. The command takes four arguments, and has a
+ minimal set of environment variables passed down. In
+ this example, the code does not require any error checking.
+ All errors are reported by the <code>virCommandRun</code>
+ method, and the exit status from this is returned to
+ the caller to handle as desired.
+ </p>
+
+ </body>
+</html>
diff --git a/docs/sitemap.html.in b/docs/sitemap.html.in
index 692da29..7db59a1 100644
--- a/docs/sitemap.html.in
+++ b/docs/sitemap.html.in
@@ -260,6 +260,10 @@
<a href="api_extension.html">API extensions</a>
<span>Adding new public libvirt APIs</span>
</li>
+ <li>
+ <a href="internals/command.html">Spawning
commands</a>
+ <span>Spawning commands from libvirt driver code</span>
+ </li>
</ul>
</li>
<li>
diff --git a/docs/subsite.xsl b/docs/subsite.xsl
new file mode 100644
index 0000000..108d0d8
--- /dev/null
+++ b/docs/subsite.xsl
@@ -0,0 +1,25 @@
+<?xml version="1.0"?>
+<xsl:stylesheet
+ xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+ xmlns:exsl="http://exslt.org/common"
+ exclude-result-prefixes="xsl exsl"
+ version="1.0">
+
+ <xsl:import href="page.xsl"/>
+
+ <xsl:output
+ method="xml"
+ encoding="UTF-8"
+ indent="yes"
+ doctype-public="-//W3C//DTD XHTML 1.0 Strict//EN"
+ doctype-system="http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd&qu...
+
+ <xsl:variable name="href_base" select="'../'"/>
+
+ <xsl:template match="/">
+ <xsl:apply-templates select="." mode="page">
+ <xsl:with-param name="pagename" select="$pagename"/>
+ </xsl:apply-templates>
+ </xsl:template>
+
+</xsl:stylesheet>
--
1.7.3.2