11:02 p.m.
Move entering the job into the thread to simplify the program flow. Also
as the code holds a separate reference to the domain object some
conditions can be simplified.
---
src/qemu/qemu_process.c | 167 ++++++++++++++++++++++--------------------------
1 file changed, 76 insertions(+), 91 deletions(-)
diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
index 08d6b7c..2029745 100644
--- a/src/qemu/qemu_process.c
+++ b/src/qemu/qemu_process.c
@@ -3524,8 +3524,7 @@ qemuProcessUpdateDevices(virQEMUDriverPtr driver,
struct qemuProcessReconnectData {
virConnectPtr conn;
virQEMUDriverPtr driver;
- void *payload;
- struct qemuDomainJobObj oldjob;
+ virDomainObjPtr obj;
};
/*
* Open an existing VM's monitor, re-detect VCPU threads
@@ -3534,13 +3533,27 @@ struct qemuProcessReconnectData {
* We own the virConnectPtr we are passed here - whoever started
* this thread function has increased the reference counter to it
* so that we now have to close it.
+ *
+ * This function also inherits a locked domain object.
+ *
+ * This function needs to:
+ * 1. Enter job
+ * 1. just before monitor reconnect do lightweight MonitorEnter
+ * (increase VM refcount and unlock VM)
+ * 2. reconnect to monitor
+ * 3. do lightweight MonitorExit (lock VM)
+ * 4. continue reconnect process
+ * 5. EndJob
+ *
+ * We can't do normal MonitorEnter & MonitorExit because these two lock the
+ * monitor lock, which does not exists in this early phase.
*/
static void
qemuProcessReconnect(void *opaque)
{
struct qemuProcessReconnectData *data = opaque;
virQEMUDriverPtr driver = data->driver;
- virDomainObjPtr obj = data->payload;
+ virDomainObjPtr obj = data->obj;
qemuDomainObjPrivatePtr priv;
virConnectPtr conn = data->conn;
struct qemuDomainJobObj oldjob;
@@ -3550,26 +3563,24 @@ qemuProcessReconnect(void *opaque)
size_t i;
int ret;
- memcpy(&oldjob, &data->oldjob, sizeof(oldjob));
-
VIR_FREE(data);
- virNWFilterReadLockFilterUpdates();
+ qemuDomainObjRestoreJob(obj, &oldjob);
- virObjectLock(obj);
+ /* Hold an extra reference because we can't allow 'vm' to be
+ * deleted if qemuConnectMonitor() failed */
+ virObjectRef(obj);
+
+ if (qemuDomainObjBeginJob(driver, obj, QEMU_JOB_MODIFY) < 0)
+ goto killvm;
+
+ virNWFilterReadLockFilterUpdates();
cfg = virQEMUDriverGetConfig(driver);
VIR_DEBUG("Reconnect monitor to %p '%s'", obj,
obj->def->name);
priv = obj->privateData;
- /* Job was started by the caller for us */
- qemuDomainObjTransferJob(obj);
-
- /* Hold an extra reference because we can't allow 'vm' to be
- * deleted if qemuConnectMonitor() failed */
- virObjectRef(obj);
-
/* XXX check PID liveliness & EXE path */
if (qemuConnectMonitor(driver, obj, QEMU_ASYNC_JOB_NONE, -1) < 0)
goto error;
@@ -3701,10 +3712,10 @@ qemuProcessReconnect(void *opaque)
driver->inhibitCallback(true, driver->inhibitOpaque);
endjob:
- if (!qemuDomainObjEndJob(driver, obj))
- obj = NULL;
+ /* we hold an extra reference, so this will never fail */
+ ignore_value(qemuDomainObjEndJob(driver, obj));
- if (obj && virObjectUnref(obj))
+ if (virObjectUnref(obj))
virObjectUnlock(obj);
virObjectUnref(conn);
@@ -3714,35 +3725,35 @@ qemuProcessReconnect(void *opaque)
return;
error:
- if (!qemuDomainObjEndJob(driver, obj))
- obj = NULL;
-
- if (obj) {
- if (!virDomainObjIsActive(obj)) {
- if (virObjectUnref(obj))
- virObjectUnlock(obj);
- } else if (virObjectUnref(obj)) {
- /* We can't get the monitor back, so must kill the VM
- * to remove danger of it ending up running twice if
- * user tries to start it again later
- */
- if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_NO_SHUTDOWN)) {
- /* If we couldn't get the monitor and qemu supports
- * no-shutdown, we can safely say that the domain
- * crashed ... */
- state = VIR_DOMAIN_SHUTOFF_CRASHED;
- } else {
- /* ... but if it doesn't we can't say what the state
- * really is and FAILED means "failed to start" */
- state = VIR_DOMAIN_SHUTOFF_UNKNOWN;
- }
- qemuProcessStop(driver, obj, state, 0);
- if (!obj->persistent)
- qemuDomainRemoveInactive(driver, obj);
- else
- virObjectUnlock(obj);
+ /* we hold an extra reference, so this will never fail */
+ ignore_value(qemuDomainObjEndJob(driver, obj));
+
+ killvm:
+ if (virDomainObjIsActive(obj)) {
+ /* We can't get the monitor back, so must kill the VM
+ * to remove danger of it ending up running twice if
+ * user tries to start it again later
+ */
+ if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_NO_SHUTDOWN)) {
+ /* If we couldn't get the monitor and qemu supports
+ * no-shutdown, we can safely say that the domain
+ * crashed ... */
+ state = VIR_DOMAIN_SHUTOFF_CRASHED;
+ } else {
+ /* ... but if it doesn't we can't say what the state
+ * really is and FAILED means "failed to start" */
+ state = VIR_DOMAIN_SHUTOFF_UNKNOWN;
}
+ qemuProcessStop(driver, obj, state, 0);
+ }
+
+ if (virObjectUnref(obj)) {
+ if (!obj->persistent)
+ qemuDomainRemoveInactive(driver, obj);
+ else
+ virObjectUnlock(obj);
}
+
virObjectUnref(conn);
virObjectUnref(cfg);
virNWFilterUnlockFilterUpdates();
@@ -3756,71 +3767,45 @@ qemuProcessReconnectHelper(virDomainObjPtr obj,
struct qemuProcessReconnectData *src = opaque;
struct qemuProcessReconnectData *data;
- if (!obj->pid)
- return 0;
-
if (VIR_ALLOC(data) < 0)
return -1;
memcpy(data, src, sizeof(*data));
- data->payload = obj;
-
- /*
- * We create a separate thread to run qemuProcessReconnect in it.
- * However, qemuProcessReconnect needs to:
- * 1. just before monitor reconnect do lightweight MonitorEnter
- * (increase VM refcount, unlock VM & driver)
- * 2. reconnect to monitor
- * 3. do lightweight MonitorExit (lock VM)
- * 4. continue reconnect process
- * 5. EndJob
- *
- * NB, we can't do normal MonitorEnter & MonitorExit because
- * these two lock the monitor lock, which does not exists in
- * this early phase.
- */
+ data->obj = obj;
+ /* this lock will be eventually transferred to the thread that handles the
+ * reconnect */
virObjectLock(obj);
- qemuDomainObjRestoreJob(obj, &data->oldjob);
-
- if (qemuDomainObjBeginJob(src->driver, obj, QEMU_JOB_MODIFY) < 0)
- goto error;
+ /* If the VM was inactive, we don't need to reconnect */
+ if (!obj->pid) {
+ virObjectUnlock(obj);
+ return 0;
+ }
- /* Since we close the connection later on, we have to make sure
- * that the threads we start see a valid connection throughout their
- * lifetime. We simply increase the reference counter here.
+ /* Since we close the connection later on, we have to make sure that the
+ * threads we start see a valid connection throughout their lifetime. We
+ * simply increase the reference counter here.
*/
virObjectRef(data->conn);
if (virThreadCreate(&thread, false, qemuProcessReconnect, data) < 0) {
-
- virObjectUnref(data->conn);
-
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
_("Could not create thread. QEMU initialization "
"might be incomplete"));
- if (!qemuDomainObjEndJob(src->driver, obj)) {
- obj = NULL;
- } else if (virObjectUnref(obj)) {
- /* We can't spawn a thread and thus connect to monitor.
- * Kill qemu */
- qemuProcessStop(src->driver, obj, VIR_DOMAIN_SHUTOFF_FAILED, 0);
- if (!obj->persistent)
- qemuDomainRemoveInactive(src->driver, obj);
- else
- virObjectUnlock(obj);
- }
- goto error;
- }
+ /* We can't spawn a thread and thus connect to monitor. Kill qemu. */
+ qemuProcessStop(src->driver, obj, VIR_DOMAIN_SHUTOFF_FAILED, 0);
+ if (!obj->persistent)
+ qemuDomainRemoveInactive(src->driver, obj);
+ else
+ virObjectUnlock(obj);
- virObjectUnlock(obj);
+ virObjectUnref(data->conn);
+ VIR_FREE(data);
+ return -1;
+ }
return 0;
-
- error:
- VIR_FREE(data);
- return -1;
}
/**
--
2.1.0