[libvirt] [PATCH 1/8] qemuhelptest: remove downstream test data

Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com&gt; --- tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60 | 227 -------------------- tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device | 57 ----- tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61 | 229 -------------------- tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device | 99 --------- tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta | 230 --------------------- .../qemu-kvm-0.12.1.2-rhel62-beta-device | 120 ----------- tests/qemuhelptest.c | 145 ------------- 7 files changed, 1107 deletions(-) delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60 delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61 delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60 b/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60 deleted file mode 100644 index 3a2ecf3..0000000 --- a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60 +++ /dev/null @@ -1,227 +0,0 @@ -QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2), Copyright (c) 2003-2008 Fabrice Bellard - -WARNING: Direct use of qemu-kvm from the command line is unsupported. -WARNING: Only use via libvirt. -WARNING: Some options listed here may not be available in future releases. - -usage: qemu [options] [disk_image] - -'disk_image' is a raw hard image image for IDE hard disk 0 - -Standard options: --h or -help display this help and exit --version display version information and exit --M machine select emulated machine (-M ? for list) --cpu cpu select CPU (-cpu ? for list) --smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets] - set the number of CPUs to 'n' [default=1] - maxcpus= maximum number of total cpus, including - offline CPUs for hotplug etc. - cores= number of CPU cores on one socket - threads= number of threads on one CPU core - sockets= number of discrete sockets in the system --numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node] --fda/-fdb file use 'file' as floppy disk 0/1 image --hda/-hdb file use 'file' as IDE hard disk 0/1 image --hdc/-hdd file use 'file' as IDE hard disk 2/3 image --cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master) --drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i] - [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off] - [,cache=writethrough|writeback|none][,format=f][,serial=s] - [,addr=A][,id=name][,aio=threads|native] - [,boot=on|off][,readonly=on|off] - use 'file' as a drive image --set group.id.arg=value - set <arg> parameter for item <id> of type <group> - i.e. -set drive.$id.file=/path/to/image --global driver.property=value - set a global default for a driver property --mtdblock file use 'file' as on-board Flash memory image --sd file use 'file' as SecureDigital card image --pflash file use 'file' as a parallel flash image --boot [order=drives][,once=drives][,menu=on|off] - 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n) --snapshot write to temporary files instead of disk image files --m megs set virtual RAM size to megs MB [default=128] --k language use keyboard layout (for example 'fr' for French) --audio-help print list of audio drivers and their options --soundhw c1,... enable audio support - and only specified sound cards (comma separated list) - use -soundhw ? to get the list of supported cards - use -soundhw all to enable all of them --usb enable the USB driver (will be the default soon) --usbdevice name add the host or guest USB device 'name' --device driver[,prop[=value][,...]] - add device (based on driver) - prop=value,... sets driver properties - use -device ? to print all possible drivers - use -device driver,? to print all possible properties --name string1[,process=string2] set the name of the guest - string1 sets the window title and string2 the process name (on Linux) --uuid %08x-%04x-%04x-%04x-%012x - specify machine UUID - -Display options: --nographic disable graphical output and redirect serial I/Os to console --spice <args> use spice --portrait rotate graphical output 90 deg left (only PXA LCD) --vga [std|cirrus|vmware|xenfb|qxl|none] - select video card type --full-screen start in full screen --vnc display start a VNC server on display - -i386 target only: --win2k-hack use it when installing Windows 2000 to avoid a disk full bug --no-fd-bootchk disable boot signature checking for floppy disks --no-acpi disable ACPI --balloon none disable balloon device --balloon virtio[,addr=str] - enable virtio balloon device (default) --acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...] - ACPI table description --smbios file=binary - Load SMBIOS entry from binary file --smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] - Specify SMBIOS type 0 fields --smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str] - [,uuid=uuid][,sku=str][,family=str] - Specify SMBIOS type 1 fields - -Network options: --net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v] - create a new Network Interface Card and connect it to VLAN 'n' --net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=y|n] - [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f] - [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]] - connect the user mode network stack to VLAN 'n', configure its - DHCP server and enabled optional services --net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h] - connect the host TAP network interface to VLAN 'n' and use the - network scripts 'file' (default=/etc/qemu-ifup) - and 'dfile' (default=/etc/qemu-ifdown); - use '[down]script=no' to disable script execution; - use 'fd=h' to connect to an already opened TAP interface - use 'sndbuf=nbytes' to limit the size of the send buffer; the - default of 'sndbuf=1048576' can be disabled using 'sndbuf=0' - use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag; use - vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition - use vhost=on to enable experimental in kernel accelerator - use 'vhostfd=h' to connect to an already opened vhost net device --net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port] - connect the vlan 'n' to another VLAN using a socket connection --net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port] - connect the vlan 'n' to multicast maddr and port --net dump[,vlan=n][,file=f][,len=n] - dump traffic on vlan 'n' to file 'f' (max n bytes per packet) --net none use it alone to have zero network devices; if no -net option - is provided, the default is '-net nic -net user' --netdev [user|tap|socket],id=str[,option][,option][,...] - -Character device options: --chardev null,id=id --chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay] - [,server][,nowait][,telnet] (tcp) --chardev socket,id=id,path=path[,server][,nowait][,telnet] (unix) --chardev udp,id=id[,host=host],port=port[,localaddr=localaddr] - [,localport=localport][,ipv4][,ipv6] --chardev msmouse,id=id --chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]] --chardev file,id=id,path=path --chardev pipe,id=id,path=path --chardev pty,id=id --chardev stdio,id=id --chardev tty,id=id,path=path --chardev parport,id=id,path=path - -Bluetooth(R) options: --bt hci,null dumb bluetooth HCI - doesn't respond to commands --bt hci,host[:id] - use host's HCI with the given name --bt hci[,vlan=n] - emulate a standard HCI in virtual scatternet 'n' --bt vhci[,vlan=n] - add host computer to virtual scatternet 'n' using VHCI --bt device:dev[,vlan=n] - emulate a bluetooth device 'dev' in scatternet 'n' - -Linux/Multiboot boot specific: --kernel bzImage use 'bzImage' as kernel image --append cmdline use 'cmdline' as kernel command line --initrd file use 'file' as initial ram disk - -Debug/Expert options: --serial dev redirect the serial port to char device 'dev' --parallel dev redirect the parallel port to char device 'dev' --monitor dev redirect the monitor to char device 'dev' --qmp dev like -monitor but opens in 'control' mode. --mon chardev=[name][,mode=readline|control][,default] --pidfile file write PID to 'file' --singlestep always run in singlestep mode --S freeze CPU at startup (use 'c' to start execution) --gdb dev wait for gdb connection on 'dev' --s shorthand for -gdb tcp::1234 --d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items) --hdachs c,h,s[,t] - force hard disk 0 physical geometry and the optional BIOS - translation (t=none or lba) (usually qemu can guess them) --L path set the directory for the BIOS, VGA BIOS and keymaps --bios file set the filename for the BIOS --enable-kvm enable KVM full virtualization support --no-reboot exit instead of rebooting --no-shutdown stop before shutdown --loadvm [tag|id] - start right away with a saved state (loadvm in monitor) --daemonize daemonize QEMU after initializing --option-rom rom load a file, rom, into the option ROM space --clock force the use of the given methods for timer alarm. - To see what timers are available use -clock ? --rtc [base=utc|localtime|date][,clock=host|vm][,driftfix=none|slew] - set the RTC base and clock, enable drift fix for clock ticks --icount [N|auto] - enable virtual instruction counter with 2^N clock ticks per - instruction --watchdog i6300esb|ib700 - enable virtual hardware watchdog [default=none] --watchdog-action reset|shutdown|poweroff|pause|debug|none - action when watchdog fires [default=reset] --echr chr set terminal escape character instead of ctrl-a --virtioconsole c - set virtio console --show-cursor show cursor --tb-size n set TB size --incoming p prepare for incoming migration, listen on port p --nodefaults don't create default devices. --chroot dir Chroot to dir just before starting the VM. --runas user Change to user id user just before starting the VM. --nodefconfig - do not load default config files at startup --readconfig <file> --writeconfig <file> - read/write config file --no-kvm disable KVM hardware virtualization --no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC --no-kvm-pit disable KVM kernel mode PIT --no-kvm-pit-reinjection disable KVM kernel mode PIT interrupt reinjection --pcidevice host=bus:dev.func[,dma=none][,name=string] - expose a PCI device to the guest OS. - dma=none: don't perform any dma translations (default is to use an iommu) - 'string' is used in log output. --enable-nesting enable support for running a VM inside the VM (AMD only) --nvram FILE provide ia64 nvram contents --tdf enable guest time drift compensation --kvm-shadow-memory MEGABYTES - allocate MEGABYTES for kvm mmu shadowing --mem-path FILE provide backing storage for guest RAM --mem-prealloc preallocate guest memory (use with -mempath) - -During emulation, the following keys are useful: -ctrl-alt-f toggle full screen -ctrl-alt-n switch to virtual console 'n' -ctrl-alt toggle mouse and keyboard grab - -When using -nographic, press 'ctrl-a h' to get some help. - -WARNING: Direct use of qemu-kvm from the command line is unsupported. -WARNING: Only use via libvirt. -WARNING: Some options listed here may not be available in future releases. - diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device b/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device deleted file mode 100644 index d20fb7d..0000000 --- a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device +++ /dev/null @@ -1,57 +0,0 @@ -name "pci-bridge", bus PCI -name "virtio-balloon-pci", bus PCI -name "virtio-serial-pci", bus PCI, alias "virtio-serial" -name "virtio-net-pci", bus PCI -name "virtio-blk-pci", bus PCI -name "i82562", bus PCI -name "i82559er", bus PCI -name "i82559c", bus PCI -name "i82559b", bus PCI -name "i82559a", bus PCI -name "i82558b", bus PCI -name "i82558a", bus PCI -name "i82557c", bus PCI -name "i82557b", bus PCI -name "i82557a", bus PCI -name "i82551", bus PCI -name "i82550", bus PCI -name "pcnet", bus PCI -name "rtl8139", bus PCI -name "e1000", bus PCI, desc "Intel Gigabit Ethernet" -name "ide-drive", bus IDE -name "isa-ide", bus ISA -name "ES1370", bus PCI, desc "ENSONIQ AudioPCI ES1370" -name "AC97", bus PCI, desc "Intel 82801AA AC97 Audio" -name "VGA", bus PCI -name "SUNW,fdtwo", bus System -name "sysbus-fdc", bus System -name "isa-serial", bus ISA -name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA" -name "isa-parallel", bus ISA -name "piix4-usb-uhci", bus PCI -name "piix3-usb-uhci", bus PCI -name "vmware-svga", bus PCI -name "ib700", bus ISA -name "ne2k_isa", bus ISA -name "testdev", bus ISA -name "pci-assign", bus PCI, desc "pass through host pci devices to the guest" -name "qxl", bus PCI, desc "Spice QXL GPU" -name "spicevmc", bus virtio-serial-bus -name "smbus-eeprom", bus I2C -name "usb-hub", bus USB -name "usb-host", bus USB -name "usb-kbd", bus USB -name "usb-mouse", bus USB -name "usb-tablet", bus USB -name "usb-wacom-tablet", bus USB, desc "QEMU PenPartner Tablet" -name "usb-braille", bus USB -name "usb-serial", bus USB -name "usb-net", bus USB -name "usb-bt-dongle", bus USB -name "virtserialport", bus virtio-serial-bus -name "virtconsole", bus virtio-serial-bus -name "i6300esb", bus PCI -name "ne2k_pci", bus PCI -pci-assign.host=pci-hostaddr -pci-assign.iommu=uint32 -pci-assign.configfd=string diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61 b/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61 deleted file mode 100644 index e95c6b1..0000000 --- a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61 +++ /dev/null @@ -1,229 +0,0 @@ -QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2), Copyright (c) 2003-2008 Fabrice Bellard - -WARNING: Direct use of qemu-kvm from the command line is unsupported. -WARNING: Only use via libvirt. -WARNING: Some options listed here may not be available in future releases. - -usage: qemu [options] [disk_image] - -'disk_image' is a raw hard image image for IDE hard disk 0 - -Standard options: --h or -help display this help and exit --version display version information and exit --M machine select emulated machine (-M ? for list) --cpu cpu select CPU (-cpu ? for list) --smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets] - set the number of CPUs to 'n' [default=1] - maxcpus= maximum number of total cpus, including - offline CPUs for hotplug etc. - cores= number of CPU cores on one socket - threads= number of threads on one CPU core - sockets= number of discrete sockets in the system --numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node] --fda/-fdb file use 'file' as floppy disk 0/1 image --hda/-hdb file use 'file' as IDE hard disk 0/1 image --hdc/-hdd file use 'file' as IDE hard disk 2/3 image --cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master) --drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i] - [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off] - [,cache=writethrough|writeback|none|unsafe][,format=f] - [,serial=s][,addr=A][,id=name][,aio=threads|native] - [,readonly=on|off] - use 'file' as a drive image --set group.id.arg=value - set <arg> parameter for item <id> of type <group> - i.e. -set drive.$id.file=/path/to/image --global driver.property=value - set a global default for a driver property --mtdblock file use 'file' as on-board Flash memory image --sd file use 'file' as SecureDigital card image --pflash file use 'file' as a parallel flash image --boot [order=drives][,once=drives][,menu=on|off] - 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n) --snapshot write to temporary files instead of disk image files --m megs set virtual RAM size to megs MB [default=128] --k language use keyboard layout (for example 'fr' for French) --audio-help print list of audio drivers and their options --soundhw c1,... enable audio support - and only specified sound cards (comma separated list) - use -soundhw ? to get the list of supported cards - use -soundhw all to enable all of them --usb enable the USB driver (will be the default soon) --usbdevice name add the host or guest USB device 'name' --device driver[,prop[=value][,...]] - add device (based on driver) - prop=value,... sets driver properties - use -device ? to print all possible drivers - use -device driver,? to print all possible properties --name string1[,process=string2] set the name of the guest - string1 sets the window title and string2 the process name (on Linux) --uuid %08x-%04x-%04x-%04x-%012x - specify machine UUID - -Display options: --nographic disable graphical output and redirect serial I/Os to console --spice <args> enable spice --portrait rotate graphical output 90 deg left (only PXA LCD) --vga [std|cirrus|vmware|qxl|xenfb|none] - select video card type --full-screen start in full screen --vnc display start a VNC server on display - -i386 target only: --win2k-hack use it when installing Windows 2000 to avoid a disk full bug --no-fd-bootchk disable boot signature checking for floppy disks --no-acpi disable ACPI --balloon none disable balloon device --balloon virtio[,addr=str] - enable virtio balloon device (default) --acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...] - ACPI table description --smbios file=binary - Load SMBIOS entry from binary file --smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] - Specify SMBIOS type 0 fields --smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str] - [,uuid=uuid][,sku=str][,family=str] - Specify SMBIOS type 1 fields - -Network options: --net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v] - create a new Network Interface Card and connect it to VLAN 'n' --net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=y|n] - [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f] - [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]] - connect the user mode network stack to VLAN 'n', configure its - DHCP server and enabled optional services --net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h] - connect the host TAP network interface to VLAN 'n' and use the - network scripts 'file' (default=/etc/qemu-ifup) - and 'dfile' (default=/etc/qemu-ifdown); - use '[down]script=no' to disable script execution; - use 'fd=h' to connect to an already opened TAP interface - use 'sndbuf=nbytes' to limit the size of the send buffer; the - default of 'sndbuf=1048576' can be disabled using 'sndbuf=0' - use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag; use - vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition - use vhost=on to enable experimental in kernel accelerator - use 'vhostfd=h' to connect to an already opened vhost net device --net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port] - connect the vlan 'n' to another VLAN using a socket connection --net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port] - connect the vlan 'n' to multicast maddr and port --net dump[,vlan=n][,file=f][,len=n] - dump traffic on vlan 'n' to file 'f' (max n bytes per packet) --net none use it alone to have zero network devices; if no -net option - is provided, the default is '-net nic -net user' --netdev [user|tap|socket],id=str[,option][,option][,...] - -Character device options: --chardev null,id=id --chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay] - [,server][,nowait][,telnet] (tcp) --chardev socket,id=id,path=path[,server][,nowait][,telnet] (unix) --chardev udp,id=id[,host=host],port=port[,localaddr=localaddr] - [,localport=localport][,ipv4][,ipv6] --chardev msmouse,id=id --chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]] --chardev file,id=id,path=path --chardev pipe,id=id,path=path --chardev pty,id=id --chardev stdio,id=id --chardev tty,id=id,path=path --chardev parport,id=id,path=path --chardev spicevmc,id=id,debug=debug,name=name - -Bluetooth(R) options: --bt hci,null dumb bluetooth HCI - doesn't respond to commands --bt hci,host[:id] - use host's HCI with the given name --bt hci[,vlan=n] - emulate a standard HCI in virtual scatternet 'n' --bt vhci[,vlan=n] - add host computer to virtual scatternet 'n' using VHCI --bt device:dev[,vlan=n] - emulate a bluetooth device 'dev' in scatternet 'n' - -Linux/Multiboot boot specific: --kernel bzImage use 'bzImage' as kernel image --append cmdline use 'cmdline' as kernel command line --initrd file use 'file' as initial ram disk - -Debug/Expert options: --serial dev redirect the serial port to char device 'dev' --parallel dev redirect the parallel port to char device 'dev' --monitor dev redirect the monitor to char device 'dev' --qmp dev like -monitor but opens in 'control' mode. --mon chardev=[name][,mode=readline|control][,default] --pidfile file write PID to 'file' --singlestep always run in singlestep mode --S freeze CPU at startup (use 'c' to start execution) --gdb dev wait for gdb connection on 'dev' --s shorthand for -gdb tcp::1234 --d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items) --hdachs c,h,s[,t] - force hard disk 0 physical geometry and the optional BIOS - translation (t=none or lba) (usually qemu can guess them) --L path set the directory for the BIOS, VGA BIOS and keymaps --bios file set the filename for the BIOS --enable-kvm enable KVM full virtualization support --no-reboot exit instead of rebooting --no-shutdown stop before shutdown --loadvm [tag|id] - start right away with a saved state (loadvm in monitor) --daemonize daemonize QEMU after initializing --option-rom rom load a file, rom, into the option ROM space --clock force the use of the given methods for timer alarm. - To see what timers are available use -clock ? --rtc [base=utc|localtime|date][,clock=host|vm][,driftfix=none|slew] - set the RTC base and clock, enable drift fix for clock ticks --icount [N|auto] - enable virtual instruction counter with 2^N clock ticks per - instruction --watchdog i6300esb|ib700 - enable virtual hardware watchdog [default=none] --watchdog-action reset|shutdown|poweroff|pause|debug|none - action when watchdog fires [default=reset] --echr chr set terminal escape character instead of ctrl-a --virtioconsole c - set virtio console --show-cursor show cursor --tb-size n set TB size --incoming p prepare for incoming migration, listen on port p --nodefaults don't create default devices. --chroot dir Chroot to dir just before starting the VM. --runas user Change to user id user just before starting the VM. --nodefconfig - do not load default config files at startup --readconfig <file> --writeconfig <file> - read/write config file --no-kvm disable KVM hardware virtualization --no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC --no-kvm-pit disable KVM kernel mode PIT --no-kvm-pit-reinjection disable KVM kernel mode PIT interrupt reinjection --pcidevice host=bus:dev.func[,dma=none][,name=string] - expose a PCI device to the guest OS. - dma=none: don't perform any dma translations (default is to use an iommu) - 'string' is used in log output. --enable-nesting enable support for running a VM inside the VM (AMD only) --nvram FILE provide ia64 nvram contents --tdf enable guest time drift compensation --kvm-shadow-memory MEGABYTES - allocate MEGABYTES for kvm mmu shadowing --mem-path FILE provide backing storage for guest RAM --mem-prealloc preallocate guest memory (use with -mempath) --redhat-disable-KSM disable KSM on guest physical memory - -During emulation, the following keys are useful: -ctrl-alt-f toggle full screen -ctrl-alt-n switch to virtual console 'n' -ctrl-alt toggle mouse and keyboard grab - -When using -nographic, press 'ctrl-a h' to get some help. - -WARNING: Direct use of qemu-kvm from the command line is unsupported. -WARNING: Only use via libvirt. -WARNING: Some options listed here may not be available in future releases. - diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device b/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device deleted file mode 100644 index 8ac9630..0000000 --- a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device +++ /dev/null @@ -1,99 +0,0 @@ -open /dev/kvm: No such file or directory -Could not initialize KVM, will disable KVM support -name "pci-bridge", bus PCI -name "virtio-balloon-pci", bus PCI -name "virtio-serial-pci", bus PCI, alias "virtio-serial" -name "virtio-net-pci", bus PCI -name "virtio-blk-pci", bus PCI -name "i82562", bus PCI -name "i82559er", bus PCI -name "i82559c", bus PCI -name "i82559b", bus PCI -name "i82559a", bus PCI -name "i82558b", bus PCI -name "i82558a", bus PCI -name "i82557c", bus PCI -name "i82557b", bus PCI -name "i82557a", bus PCI -name "i82551", bus PCI -name "i82550", bus PCI -name "pcnet", bus PCI -name "rtl8139", bus PCI -name "e1000", bus PCI, desc "Intel Gigabit Ethernet" -name "ide-drive", bus IDE -name "isa-ide", bus ISA -name "ES1370", bus PCI, desc "ENSONIQ AudioPCI ES1370" -name "AC97", bus PCI, desc "Intel 82801AA AC97 Audio" -name "intel-hda", bus PCI, desc "Intel HD Audio Controller" -name "hda-duplex", bus HDA, desc "HDA Audio Codec, duplex" -name "hda-output", bus HDA, desc "HDA Audio Codec, output-only" -name "VGA", bus PCI -name "SUNW,fdtwo", bus System -name "sysbus-fdc", bus System -name "isa-serial", bus ISA -name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA" -name "isa-parallel", bus ISA -name "piix4-usb-uhci", bus PCI -name "piix3-usb-uhci", bus PCI -name "vmware-svga", bus PCI -name "ib700", bus ISA -name "ne2k_isa", bus ISA -name "testdev", bus ISA -name "pci-assign", bus PCI, desc "pass through host pci devices to the guest" -name "qxl", bus PCI, desc "Spice QXL GPU (secondary)" -name "qxl-vga", bus PCI, desc "Spice QXL GPU (primary, vga compatible)" -name "smbus-eeprom", bus I2C -name "usb-hub", bus USB -name "usb-host", bus USB -name "usb-kbd", bus USB -name "usb-mouse", bus USB -name "usb-tablet", bus USB -name "usb-wacom-tablet", bus USB, desc "QEMU PenPartner Tablet" -name "usb-braille", bus USB -name "usb-serial", bus USB -name "usb-net", bus USB -name "usb-bt-dongle", bus USB -name "usb-ccid", bus USB, desc "CCID Rev 1.1 smartcard reader" -name "ccid-card-passthru", bus ccid-bus, desc "passthrough smartcard" -name "virtserialport", bus virtio-serial-bus -name "virtconsole", bus virtio-serial-bus -name "i6300esb", bus PCI -name "ne2k_pci", bus PCI -pci-assign.host=pci-hostaddr -pci-assign.iommu=uint32 -pci-assign.configfd=string -virtio-blk-pci.class=hex32 -virtio-blk-pci.drive=drive -virtio-blk-pci.logical_block_size=uint16 -virtio-blk-pci.physical_block_size=uint16 -virtio-blk-pci.min_io_size=uint16 -virtio-blk-pci.opt_io_size=uint32 -virtio-blk-pci.ioeventfd=on/off -virtio-blk-pci.vectors=uint32 -virtio-blk-pci.indirect_desc=on/off -virtio-blk-pci.scsi=on/off -virtio-net-pci.vectors=uint32 -virtio-net-pci.indirect_desc=on/off -virtio-net-pci.csum=on/off -virtio-net-pci.guest_csum=on/off -virtio-net-pci.gso=on/off -virtio-net-pci.guest_tso4=on/off -virtio-net-pci.guest_tso6=on/off -virtio-net-pci.guest_ecn=on/off -virtio-net-pci.guest_ufo=on/off -virtio-net-pci.host_tso4=on/off -virtio-net-pci.host_tso6=on/off -virtio-net-pci.host_ecn=on/off -virtio-net-pci.host_ufo=on/off -virtio-net-pci.mrg_rxbuf=on/off -virtio-net-pci.status=on/off -virtio-net-pci.ctrl_vq=on/off -virtio-net-pci.ctrl_rx=on/off -virtio-net-pci.ctrl_vlan=on/off -virtio-net-pci.ctrl_rx_extra=on/off -virtio-net-pci.mac=macaddr -virtio-net-pci.vlan=vlan -virtio-net-pci.netdev=netdev -virtio-net-pci.x-txtimer=uint32 -virtio-net-pci.x-txburst=int32 -virtio-net-pci.tx=string diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta b/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta deleted file mode 100644 index d5927e6..0000000 --- a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta +++ /dev/null @@ -1,230 +0,0 @@ -QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2), Copyright (c) 2003-2008 Fabrice Bellard - -WARNING: Direct use of qemu-kvm from the command line is not recommended by Red Hat. -WARNING: Some command line options listed here may not be available in future releases. -WARNING: Red Hat recommends the use of libvirt as the stable management interface. - -usage: qemu [options] [disk_image] - -'disk_image' is a raw hard image image for IDE hard disk 0 - -Standard options: --h or -help display this help and exit --version display version information and exit --M machine select emulated machine (-M ? for list) --cpu cpu select CPU (-cpu ? for list) --smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets] - set the number of CPUs to 'n' [default=1] - maxcpus= maximum number of total cpus, including - offline CPUs for hotplug etc. - cores= number of CPU cores on one socket - threads= number of threads on one CPU core - sockets= number of discrete sockets in the system --numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node] --fda/-fdb file use 'file' as floppy disk 0/1 image --hda/-hdb file use 'file' as IDE hard disk 0/1 image --hdc/-hdd file use 'file' as IDE hard disk 2/3 image --cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master) --drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i] - [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off] - [,cache=writethrough|writeback|none|unsafe][,format=f] - [,serial=s][,addr=A][,id=name][,aio=threads|native] - [,readonly=on|off][,copy-on-read=on|off][,stream=on|off] - use 'file' as a drive image --set group.id.arg=value - set <arg> parameter for item <id> of type <group> - i.e. -set drive.$id.file=/path/to/image --global driver.property=value - set a global default for a driver property --mtdblock file use 'file' as on-board Flash memory image --sd file use 'file' as SecureDigital card image --pflash file use 'file' as a parallel flash image --boot [order=drives][,once=drives][,menu=on|off] - 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n) --snapshot write to temporary files instead of disk image files --m megs set virtual RAM size to megs MB [default=128] --k language use keyboard layout (for example 'fr' for French) --audio-help print list of audio drivers and their options --soundhw c1,... enable audio support - and only specified sound cards (comma separated list) - use -soundhw ? to get the list of supported cards - use -soundhw all to enable all of them --usb enable the USB driver (will be the default soon) --usbdevice name add the host or guest USB device 'name' --device driver[,prop[=value][,...]] - add device (based on driver) - prop=value,... sets driver properties - use -device ? to print all possible drivers - use -device driver,? to print all possible properties --name string1[,process=string2] set the name of the guest - string1 sets the window title and string2 the process name (on Linux) --uuid %08x-%04x-%04x-%04x-%012x - specify machine UUID - -Display options: --nographic disable graphical output and redirect serial I/Os to console --spice <args> enable spice --portrait rotate graphical output 90 deg left (only PXA LCD) --vga [std|cirrus|vmware|qxl|xenfb|none] - select video card type --full-screen start in full screen --vnc display start a VNC server on display - -i386 target only: --win2k-hack use it when installing Windows 2000 to avoid a disk full bug --no-fd-bootchk disable boot signature checking for floppy disks --no-acpi disable ACPI --balloon none disable balloon device --balloon virtio[,addr=str] - enable virtio balloon device (default) --acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...] - ACPI table description --smbios file=binary - Load SMBIOS entry from binary file --smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] - Specify SMBIOS type 0 fields --smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str] - [,uuid=uuid][,sku=str][,family=str] - Specify SMBIOS type 1 fields - -Network options: --net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v] - create a new Network Interface Card and connect it to VLAN 'n' --net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=y|n] - [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f] - [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]] - connect the user mode network stack to VLAN 'n', configure its - DHCP server and enabled optional services --net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostforce=on|off] - connect the host TAP network interface to VLAN 'n' and use the - network scripts 'file' (default=/etc/qemu-ifup) - and 'dfile' (default=/etc/qemu-ifdown); - use '[down]script=no' to disable script execution; - use 'fd=h' to connect to an already opened TAP interface - use 'sndbuf=nbytes' to limit the size of the send buffer (the - default is disabled 'sndbuf=0' to enable flow control set 'sndbuf=1048576') - use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag; use - vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition - use vhost=on to enable experimental in kernel accelerator - (only has effect for virtio guests which use MSIX) - use vhostforce=on to force vhost on for non-MSIX virtio guests - use 'vhostfd=h' to connect to an already opened vhost net device --net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port] - connect the vlan 'n' to another VLAN using a socket connection --net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port] - connect the vlan 'n' to multicast maddr and port --net dump[,vlan=n][,file=f][,len=n] - dump traffic on vlan 'n' to file 'f' (max n bytes per packet) --net none use it alone to have zero network devices; if no -net option - is provided, the default is '-net nic -net user' --netdev [user|tap|socket],id=str[,option][,option][,...] - -Character device options: --chardev null,id=id --chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay] - [,server][,nowait][,telnet] (tcp) --chardev socket,id=id,path=path[,server][,nowait][,telnet] (unix) --chardev udp,id=id[,host=host],port=port[,localaddr=localaddr] - [,localport=localport][,ipv4][,ipv6] --chardev msmouse,id=id --chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]] --chardev file,id=id,path=path --chardev pipe,id=id,path=path --chardev pty,id=id --chardev stdio,id=id --chardev tty,id=id,path=path --chardev parport,id=id,path=path --chardev spicevmc,id=id,debug=debug,name=name - -Bluetooth(R) options: --bt hci,null dumb bluetooth HCI - doesn't respond to commands --bt hci,host[:id] - use host's HCI with the given name --bt hci[,vlan=n] - emulate a standard HCI in virtual scatternet 'n' --bt vhci[,vlan=n] - add host computer to virtual scatternet 'n' using VHCI --bt device:dev[,vlan=n] - emulate a bluetooth device 'dev' in scatternet 'n' - -Linux/Multiboot boot specific: --kernel bzImage use 'bzImage' as kernel image --append cmdline use 'cmdline' as kernel command line --initrd file use 'file' as initial ram disk - -Debug/Expert options: --serial dev redirect the serial port to char device 'dev' --parallel dev redirect the parallel port to char device 'dev' --monitor dev redirect the monitor to char device 'dev' --qmp dev like -monitor but opens in 'control' mode. --mon chardev=[name][,mode=readline|control][,default] --pidfile file write PID to 'file' --singlestep always run in singlestep mode --S freeze CPU at startup (use 'c' to start execution) --gdb dev wait for gdb connection on 'dev' --s shorthand for -gdb tcp::1234 --d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items) --hdachs c,h,s[,t] - force hard disk 0 physical geometry and the optional BIOS - translation (t=none or lba) (usually qemu can guess them) --L path set the directory for the BIOS, VGA BIOS and keymaps --bios file set the filename for the BIOS --enable-kvm enable KVM full virtualization support --no-reboot exit instead of rebooting --no-shutdown stop before shutdown --loadvm [tag|id] - start right away with a saved state (loadvm in monitor) --daemonize daemonize QEMU after initializing --option-rom rom load a file, rom, into the option ROM space --clock force the use of the given methods for timer alarm. - To see what timers are available use -clock ? --rtc [base=utc|localtime|date][,clock=host|vm][,driftfix=none|slew] - set the RTC base and clock, enable drift fix for clock ticks --icount [N|auto] - enable virtual instruction counter with 2^N clock ticks per - instruction --watchdog i6300esb|ib700 - enable virtual hardware watchdog [default=none] --watchdog-action reset|shutdown|poweroff|pause|debug|none - action when watchdog fires [default=reset] --echr chr set terminal escape character instead of ctrl-a --virtioconsole c - set virtio console --show-cursor show cursor --tb-size n set TB size --incoming p prepare for incoming migration, listen on port p --nodefaults don't create default devices. --chroot dir Chroot to dir just before starting the VM. --runas user Change to user id user just before starting the VM. --nodefconfig - do not load default config files at startup --readconfig <file> --writeconfig <file> - read/write config file --no-kvm disable KVM hardware virtualization --no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC --no-kvm-pit disable KVM kernel mode PIT --no-kvm-pit-reinjection disable KVM kernel mode PIT interrupt reinjection --pcidevice host=bus:dev.func[,dma=none][,name=string] - expose a PCI device to the guest OS. - dma=none: don't perform any dma translations (default is to use an iommu) - 'string' is used in log output. --nvram FILE provide ia64 nvram contents --tdf enable guest time drift compensation --kvm-shadow-memory MEGABYTES - allocate MEGABYTES for kvm mmu shadowing --mem-path FILE provide backing storage for guest RAM --mem-prealloc preallocate guest memory (use with -mempath) --redhat-disable-KSM disable KSM on guest physical memory - -During emulation, the following keys are useful: -ctrl-alt-f toggle full screen -ctrl-alt-n switch to virtual console 'n' -ctrl-alt toggle mouse and keyboard grab - -When using -nographic, press 'ctrl-a h' to get some help. - -WARNING: Direct use of qemu-kvm from the command line is not recommended by Red Hat. -WARNING: Some command line options listed here may not be available in future releases. -WARNING: Red Hat recommends the use of libvirt as the stable management interface. - diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device b/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device deleted file mode 100644 index ee0fd78..0000000 --- a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device +++ /dev/null @@ -1,120 +0,0 @@ -name "pci-bridge", bus PCI -name "virtio-balloon-pci", bus PCI -name "virtio-serial-pci", bus PCI, alias "virtio-serial" -name "virtio-net-pci", bus PCI -name "virtio-blk-pci", bus PCI, alias "virtio-blk" -name "i82562", bus PCI -name "i82559er", bus PCI -name "i82559c", bus PCI -name "i82559b", bus PCI -name "i82559a", bus PCI -name "i82558b", bus PCI -name "i82558a", bus PCI -name "i82557c", bus PCI -name "i82557b", bus PCI -name "i82557a", bus PCI -name "i82551", bus PCI -name "i82550", bus PCI -name "pcnet", bus PCI -name "rtl8139", bus PCI -name "e1000", bus PCI, desc "Intel Gigabit Ethernet" -name "ide-drive", bus IDE -name "isa-ide", bus ISA -name "ES1370", bus PCI, desc "ENSONIQ AudioPCI ES1370" -name "AC97", bus PCI, desc "Intel 82801AA AC97 Audio" -name "intel-hda", bus PCI, desc "Intel HD Audio Controller" -name "hda-duplex", bus HDA, desc "HDA Audio Codec, duplex" -name "hda-output", bus HDA, desc "HDA Audio Codec, output-only" -name "VGA", bus PCI -name "SUNW,fdtwo", bus System -name "sysbus-fdc", bus System -name "isa-serial", bus ISA -name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA" -name "isa-parallel", bus ISA -name "sga", bus ISA, desc "Serial Graphics Adapter" -name "ich9-usb-uhci3", bus PCI -name "ich9-usb-uhci2", bus PCI -name "ich9-usb-uhci1", bus PCI -name "piix4-usb-uhci", bus PCI -name "piix3-usb-uhci", bus PCI -name "ib700", bus ISA -name "ne2k_isa", bus ISA -name "testdev", bus ISA -name "pci-assign", bus PCI, desc "pass through host pci devices to the guest" -name "qxl", bus PCI, desc "Spice QXL GPU (secondary)" -name "qxl-vga", bus PCI, desc "Spice QXL GPU (primary, vga compatible)" -name "smbus-eeprom", bus I2C -name "usb-hub", bus USB -name "usb-host", bus USB -name "usb-kbd", bus USB -name "usb-mouse", bus USB -name "usb-tablet", bus USB -name "usb-storage", bus USB -name "scsi-disk", bus SCSI, desc "virtual SCSI disk or CD-ROM (legacy)" -name "scsi-cd", bus SCSI, desc "virtual SCSI CD-ROM" -name "scsi-hd", bus SCSI, desc "virtual SCSI disk" -name "usb-ccid", bus USB, desc "CCID Rev 1.1 smartcard reader" -name "ccid-card-passthru", bus ccid-bus, desc "passthrough smartcard" -name "virtserialport", bus virtio-serial-bus -name "virtconsole", bus virtio-serial-bus -name "ich9-usb-ehci1", bus PCI -name "usb-ehci", bus PCI -name "i6300esb", bus PCI -name "ne2k_pci", bus PCI -pci-assign.host=pci-hostaddr -pci-assign.iommu=uint32 -pci-assign.bootindex=int32 -pci-assign.configfd=string -pci-assign.addr=pci-devfn -pci-assign.romfile=string -pci-assign.rombar=uint32 -pci-assign.multifunction=on/off -virtio-blk-pci.class=hex32 -virtio-blk-pci.drive=drive -virtio-blk-pci.logical_block_size=uint16 -virtio-blk-pci.physical_block_size=uint16 -virtio-blk-pci.min_io_size=uint16 -virtio-blk-pci.opt_io_size=uint32 -virtio-blk-pci.bootindex=int32 -virtio-blk-pci.discard_granularity=uint32 -virtio-blk-pci.ioeventfd=on/off -virtio-blk-pci.vectors=uint32 -virtio-blk-pci.indirect_desc=on/off -virtio-blk-pci.event_idx=on/off -virtio-blk-pci.scsi=on/off -virtio-blk-pci.addr=pci-devfn -virtio-blk-pci.romfile=string -virtio-blk-pci.rombar=uint32 -virtio-blk-pci.multifunction=on/off -virtio-net-pci.ioeventfd=on/off -virtio-net-pci.vectors=uint32 -virtio-net-pci.indirect_desc=on/off -virtio-net-pci.event_idx=on/off -virtio-net-pci.csum=on/off -virtio-net-pci.guest_csum=on/off -virtio-net-pci.gso=on/off -virtio-net-pci.guest_tso4=on/off -virtio-net-pci.guest_tso6=on/off -virtio-net-pci.guest_ecn=on/off -virtio-net-pci.guest_ufo=on/off -virtio-net-pci.host_tso4=on/off -virtio-net-pci.host_tso6=on/off -virtio-net-pci.host_ecn=on/off -virtio-net-pci.host_ufo=on/off -virtio-net-pci.mrg_rxbuf=on/off -virtio-net-pci.status=on/off -virtio-net-pci.ctrl_vq=on/off -virtio-net-pci.ctrl_rx=on/off -virtio-net-pci.ctrl_vlan=on/off -virtio-net-pci.ctrl_rx_extra=on/off -virtio-net-pci.mac=macaddr -virtio-net-pci.vlan=vlan -virtio-net-pci.netdev=netdev -virtio-net-pci.bootindex=int32 -virtio-net-pci.x-txtimer=uint32 -virtio-net-pci.x-txburst=int32 -virtio-net-pci.tx=string -virtio-net-pci.addr=pci-devfn -virtio-net-pci.romfile=string -virtio-net-pci.rombar=uint32 -virtio-net-pci.multifunction=on/off diff --git a/tests/qemuhelptest.c b/tests/qemuhelptest.c index 7c8b841..3d0dd8d 100644 --- a/tests/qemuhelptest.c +++ b/tests/qemuhelptest.c @@ -166,47 +166,6 @@ mymain(void) QEMU_CAPS_NO_SHUTDOWN, QEMU_CAPS_NO_ACPI, QEMU_CAPS_VNC); - DO_TEST("qemu-kvm-0.12.1.2-rhel60", 12001, 1, 0, - QEMU_CAPS_DRIVE_BOOT, - QEMU_CAPS_KVM, - QEMU_CAPS_DRIVE_SERIAL, - QEMU_CAPS_MEM_PATH, - QEMU_CAPS_CHARDEV, - QEMU_CAPS_ENABLE_KVM, - QEMU_CAPS_MONITOR_JSON, - QEMU_CAPS_NETDEV, - QEMU_CAPS_RTC, - QEMU_CAPS_VHOST_NET, - QEMU_CAPS_NO_KVM_PIT, - QEMU_CAPS_TDF, - QEMU_CAPS_PCI_CONFIGFD, - QEMU_CAPS_NODEFCONFIG, - QEMU_CAPS_BOOT_MENU, - QEMU_CAPS_NESTING, - QEMU_CAPS_NAME_PROCESS, - QEMU_CAPS_SMBIOS_TYPE, - QEMU_CAPS_VGA_QXL, - QEMU_CAPS_SPICE, - QEMU_CAPS_VGA_NONE, - QEMU_CAPS_DRIVE_AIO, - QEMU_CAPS_DEVICE_SPICEVMC, - QEMU_CAPS_PIIX3_USB_UHCI, - QEMU_CAPS_PIIX4_USB_UHCI, - QEMU_CAPS_USB_HUB, - QEMU_CAPS_NO_SHUTDOWN, - QEMU_CAPS_NO_ACPI, - QEMU_CAPS_VNC, - QEMU_CAPS_DEVICE_QXL, - QEMU_CAPS_DEVICE_VGA, - QEMU_CAPS_DEVICE_CIRRUS_VGA, - QEMU_CAPS_DEVICE_VMWARE_SVGA, - QEMU_CAPS_DEVICE_USB_SERIAL, - QEMU_CAPS_DEVICE_USB_NET, - QEMU_CAPS_DEVICE_USB_KBD, - QEMU_CAPS_DEVICE_PCI_BRIDGE, - QEMU_CAPS_DEVICE_RTL8139, - QEMU_CAPS_DEVICE_E1000, - QEMU_CAPS_DEVICE_VIRTIO_NET); DO_TEST("qemu-kvm-0.12.3", 12003, 1, 0, QEMU_CAPS_DRIVE_BOOT, QEMU_CAPS_KVM, @@ -280,110 +239,6 @@ mymain(void) QEMU_CAPS_DEVICE_RTL8139, QEMU_CAPS_DEVICE_E1000, QEMU_CAPS_DEVICE_VIRTIO_NET); - DO_TEST("qemu-kvm-0.12.1.2-rhel61", 12001, 1, 0, - QEMU_CAPS_DRIVE_CACHE_UNSAFE, - QEMU_CAPS_KVM, - QEMU_CAPS_DRIVE_SERIAL, - QEMU_CAPS_MEM_PATH, - QEMU_CAPS_CHARDEV, - QEMU_CAPS_ENABLE_KVM, - QEMU_CAPS_MONITOR_JSON, - QEMU_CAPS_NETDEV, - QEMU_CAPS_RTC, - QEMU_CAPS_VHOST_NET, - QEMU_CAPS_NO_KVM_PIT, - QEMU_CAPS_TDF, - QEMU_CAPS_PCI_CONFIGFD, - QEMU_CAPS_NODEFCONFIG, - QEMU_CAPS_BOOT_MENU, - QEMU_CAPS_NESTING, - QEMU_CAPS_NAME_PROCESS, - QEMU_CAPS_SMBIOS_TYPE, - QEMU_CAPS_VGA_QXL, - QEMU_CAPS_SPICE, - QEMU_CAPS_VGA_NONE, - QEMU_CAPS_HDA_DUPLEX, - QEMU_CAPS_DRIVE_AIO, - QEMU_CAPS_CCID_PASSTHRU, - QEMU_CAPS_CHARDEV_SPICEVMC, - QEMU_CAPS_DEVICE_QXL_VGA, - QEMU_CAPS_VIRTIO_TX_ALG, - QEMU_CAPS_VIRTIO_IOEVENTFD, - QEMU_CAPS_PIIX3_USB_UHCI, - QEMU_CAPS_PIIX4_USB_UHCI, - QEMU_CAPS_USB_HUB, - QEMU_CAPS_NO_SHUTDOWN, - QEMU_CAPS_NO_ACPI, - QEMU_CAPS_VIRTIO_BLK_SCSI, - QEMU_CAPS_BLOCKIO, - QEMU_CAPS_VNC, - QEMU_CAPS_DEVICE_QXL, - QEMU_CAPS_DEVICE_VGA, - QEMU_CAPS_DEVICE_CIRRUS_VGA, - QEMU_CAPS_DEVICE_VMWARE_SVGA, - QEMU_CAPS_DEVICE_USB_SERIAL, - QEMU_CAPS_DEVICE_USB_NET, - QEMU_CAPS_DEVICE_USB_KBD, - QEMU_CAPS_DEVICE_PCI_BRIDGE, - QEMU_CAPS_DEVICE_RTL8139, - QEMU_CAPS_DEVICE_E1000, - QEMU_CAPS_DEVICE_VIRTIO_NET); - DO_TEST("qemu-kvm-0.12.1.2-rhel62-beta", 12001, 1, 0, - QEMU_CAPS_DRIVE_CACHE_UNSAFE, - QEMU_CAPS_KVM, - QEMU_CAPS_DRIVE_SERIAL, - QEMU_CAPS_MEM_PATH, - QEMU_CAPS_CHARDEV, - QEMU_CAPS_ENABLE_KVM, - QEMU_CAPS_MONITOR_JSON, - QEMU_CAPS_NETDEV, - QEMU_CAPS_RTC, - QEMU_CAPS_VHOST_NET, - QEMU_CAPS_NO_KVM_PIT, - QEMU_CAPS_TDF, - QEMU_CAPS_PCI_CONFIGFD, - QEMU_CAPS_NODEFCONFIG, - QEMU_CAPS_BOOT_MENU, - QEMU_CAPS_NAME_PROCESS, - QEMU_CAPS_SMBIOS_TYPE, - QEMU_CAPS_VGA_QXL, - QEMU_CAPS_SPICE, - QEMU_CAPS_VGA_NONE, - QEMU_CAPS_BOOTINDEX, - QEMU_CAPS_HDA_DUPLEX, - QEMU_CAPS_DRIVE_AIO, - QEMU_CAPS_PCI_BOOTINDEX, - QEMU_CAPS_CCID_PASSTHRU, - QEMU_CAPS_CHARDEV_SPICEVMC, - QEMU_CAPS_DEVICE_QXL_VGA, - QEMU_CAPS_PCI_MULTIFUNCTION, - QEMU_CAPS_VIRTIO_IOEVENTFD, - QEMU_CAPS_SGA, - QEMU_CAPS_VIRTIO_BLK_EVENT_IDX, - QEMU_CAPS_VIRTIO_NET_EVENT_IDX, - QEMU_CAPS_VIRTIO_TX_ALG, - QEMU_CAPS_VIRTIO_IOEVENTFD, - QEMU_CAPS_PIIX3_USB_UHCI, - QEMU_CAPS_PIIX4_USB_UHCI, - QEMU_CAPS_USB_EHCI, - QEMU_CAPS_ICH9_USB_EHCI1, - QEMU_CAPS_USB_HUB, - QEMU_CAPS_NO_SHUTDOWN, - QEMU_CAPS_NO_ACPI, - QEMU_CAPS_VIRTIO_BLK_SCSI, - QEMU_CAPS_DRIVE_COPY_ON_READ, - QEMU_CAPS_SCSI_CD, - QEMU_CAPS_BLOCKIO, - QEMU_CAPS_VNC, - QEMU_CAPS_DEVICE_QXL, - QEMU_CAPS_DEVICE_VGA, - QEMU_CAPS_DEVICE_CIRRUS_VGA, - QEMU_CAPS_DEVICE_PCI_BRIDGE, - QEMU_CAPS_DEVICE_USB_KBD, - QEMU_CAPS_DEVICE_USB_STORAGE, - QEMU_CAPS_DEVICE_RTL8139, - QEMU_CAPS_DEVICE_E1000, - QEMU_CAPS_DEVICE_VIRTIO_NET); DO_TEST("qemu-1.0", 1000000, 0, 0, QEMU_CAPS_DRIVE_CACHE_UNSAFE, QEMU_CAPS_DRIVE_SERIAL, -- 2.10.0