On 11/10/2015 08:32 AM, Joao Martins wrote:
Introduce support for VIR_MIGRATE_PEER2PEER in libxl driver
for supporting migration in Openstack. Most of the changes
occur at the source and no modifications at the receiver.
In P2P mode there is only the Perform phase so we must handle
the connection with the destination and actually perform the
migration. libxlDomainPerformP2P implements the connection to
the destination and let libxlDoMigrateP2P implements the actual
migration logic with virConnectPtr. In this function we do
the migration steps in the destination similar to
virDomainMigrateVersion3Full. We appropriately save the last
error reported in each of the phases to provide proper
reporting. We don't yet support VIR_MIGRATE_TUNNELED and
we always use V3 with extensible params, making the
implementation simpler.
It is worth noting that the receiver didn't have any changes,
and because it's still the v3 sequence thus it is possible to
migrate from a P2P to non-P2P host.
Signed-off-by: Joao Martins <joao.m.martins(a)oracle.com>
---
Changes since v1:
- Move Begin step to libxlDoMigrateP2P to have all 4 steps
together.
- Remove if before VIR_FREE(dom_xml)
---
src/libxl/libxl_driver.c | 13 ++-
src/libxl/libxl_migration.c | 220 ++++++++++++++++++++++++++++++++++++++++++++
src/libxl/libxl_migration.h | 11 +++
3 files changed, 241 insertions(+), 3 deletions(-)
diff --git a/src/libxl/libxl_driver.c b/src/libxl/libxl_driver.c
index fcdcbdb..da98265 100644
--- a/src/libxl/libxl_driver.c
+++ b/src/libxl/libxl_driver.c
@@ -4713,6 +4713,7 @@ libxlConnectSupportsFeature(virConnectPtr conn, int feature)
switch (feature) {
case VIR_DRV_FEATURE_TYPED_PARAM_STRING:
case VIR_DRV_FEATURE_MIGRATION_PARAMS:
+ case VIR_DRV_FEATURE_MIGRATION_P2P:
return 1;
default:
return 0;
@@ -5039,9 +5040,15 @@ libxlDomainMigratePerform3Params(virDomainPtr dom,
if (virDomainMigratePerform3ParamsEnsureACL(dom->conn, vm->def) < 0)
goto cleanup;
- if (libxlDomainMigrationPerform(driver, vm, dom_xml, dconnuri,
- uri, dname, flags) < 0)
- goto cleanup;
+ if (flags & VIR_MIGRATE_PEER2PEER) {
+ if (libxlDomainMigrationPerformP2P(driver, vm, dom->conn, dom_xml,
+ dconnuri, uri, dname, flags) < 0)
+ goto cleanup;
+ } else {
+ if (libxlDomainMigrationPerform(driver, vm, dom_xml, dconnuri,
+ uri, dname, flags) < 0)
+ goto cleanup;
+ }
ret = 0;
diff --git a/src/libxl/libxl_migration.c b/src/libxl/libxl_migration.c
index 0d23e5f..a1c7b55 100644
--- a/src/libxl/libxl_migration.c
+++ b/src/libxl/libxl_migration.c
@@ -42,6 +42,7 @@
#include "libxl_conf.h"
#include "libxl_migration.h"
#include "locking/domain_lock.h"
+#include "virtypedparam.h"
#define VIR_FROM_THIS VIR_FROM_LIBXL
@@ -456,6 +457,225 @@ libxlDomainMigrationPrepare(virConnectPtr dconn,
return ret;
}
+/* This function is a simplification of virDomainMigrateVersion3Full
+ * excluding tunnel support and restricting it to migration v3
+ * with params since it was the first to be introduced in libxl.
+ */
+static int
+libxlDoMigrateP2P(libxlDriverPrivatePtr driver,
+ virDomainObjPtr vm,
+ virConnectPtr sconn,
+ const char *xmlin,
+ virConnectPtr dconn,
+ const char *dconnuri ATTRIBUTE_UNUSED,
+ const char *dname,
+ const char *uri,
+ unsigned int flags)
+{
+ virDomainPtr ddomain = NULL;
+ virTypedParameterPtr params = NULL;
+ int nparams = 0;
+ int maxparams = 0;
+ char *uri_out = NULL;
+ char *dom_xml = NULL;
+ unsigned long destflags;
+ bool cancelled = true;
+ virErrorPtr orig_err = NULL;
+ int ret = -1;
+
+ dom_xml = libxlDomainMigrationBegin(sconn, vm, xmlin);
+ if (!dom_xml)
+ goto cleanup;
+
+ if (virTypedParamsAddString(¶ms, &nparams, &maxparams,
+ VIR_MIGRATE_PARAM_DEST_XML, dom_xml) < 0)
+ goto cleanup;
+
+ if (dname &&
+ virTypedParamsAddString(¶ms, &nparams, &maxparams,
+ VIR_MIGRATE_PARAM_DEST_NAME, dname) < 0)
+ goto cleanup;
+
+ if (uri &&
+ virTypedParamsAddString(¶ms, &nparams, &maxparams,
+ VIR_MIGRATE_PARAM_URI, uri) < 0)
+ goto cleanup;
+
+ /* We don't require the destination to have P2P support
+ * as it looks to be normal migration from the receiver perpective.
+ */
+ destflags = flags & ~(VIR_MIGRATE_PEER2PEER);
+
+ VIR_DEBUG("Prepare3");
+ virObjectUnlock(vm);
+ ret = dconn->driver->domainMigratePrepare3Params
+ (dconn, params, nparams, NULL, 0, NULL, NULL, &uri_out, destflags);
+ virObjectLock(vm);
Is it necessary to unlock and lock the vm while calling prepare and finish on
the destination libvirtd?
+
+ if (ret == -1)
+ goto cleanup;
+
+ if (uri_out) {
+ if (virTypedParamsReplaceString(¶ms, &nparams,
+ VIR_MIGRATE_PARAM_URI, uri_out) < 0) {
+ orig_err = virSaveLastError();
+ goto finish;
+ }
+ } else {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("domainMigratePrepare3 did not set uri"));
+ goto finish;
+ }
+
+ VIR_DEBUG("Perform3 uri=%s", NULLSTR(uri_out));
+ ret = libxlDomainMigrationPerform(driver, vm, NULL, NULL,
+ uri_out, NULL, flags);
+
+ if (ret < 0)
+ orig_err = virSaveLastError();
+
+ cancelled = (ret < 0);
+
+ finish:
+ VIR_DEBUG("Finish3 ret=%d", ret);
+ if (virTypedParamsGetString(params, nparams,
+ VIR_MIGRATE_PARAM_DEST_NAME, NULL) <= 0 &&
+ virTypedParamsReplaceString(¶ms, &nparams,
+ VIR_MIGRATE_PARAM_DEST_NAME,
+ vm->def->name) < 0) {
+ ddomain = NULL;
+ } else {
+ virObjectUnlock(vm);
+ ddomain = dconn->driver->domainMigrateFinish3Params
+ (dconn, params, nparams, NULL, 0, NULL, NULL,
+ destflags, cancelled);
+ virObjectLock(vm);
+ }
+
+ cancelled = (ddomain == NULL);
+
+ /* If Finish3Params set an error, and we don't have an earlier
+ * one we need to preserve it in case confirm3 overwrites
+ */
+ if (!orig_err)
+ orig_err = virSaveLastError();
+
+ VIR_DEBUG("Confirm3 cancelled=%d vm=%p", cancelled, vm);
+ ret = libxlDomainMigrationConfirm(driver, vm, flags, cancelled);
+
+ if (ret < 0)
+ VIR_WARN("Guest %s probably left in 'paused' state on
source",
+ vm->def->name);
+
+ cleanup:
+ if (ddomain) {
+ virObjectUnref(ddomain);
+ ret = 0;
+ } else {
+ ret = -1;
+ }
+
+ if (orig_err) {
+ virSetError(orig_err);
+ virFreeError(orig_err);
+ }
+
+ VIR_FREE(dom_xml);
+ VIR_FREE(uri_out);
+ virTypedParamsFree(params, nparams);
+ return ret;
+}
+
+static int virConnectCredType[] = {
+ VIR_CRED_AUTHNAME,
+ VIR_CRED_PASSPHRASE,
+};
+
+static virConnectAuth virConnectAuthConfig = {
+ .credtype = virConnectCredType,
+ .ncredtype = ARRAY_CARDINALITY(virConnectCredType),
+};
+
+static void
+libxlMigrationConnectionClosed(virConnectPtr conn,
+ int reason,
+ void *opaque)
+{
+ virDomainObjPtr vm = opaque;
+
+ VIR_DEBUG("conn=%p, reason=%d, vm=%s", conn, reason,
vm->def->name);
+ virDomainObjBroadcast(vm);
I would expect to see a corresponding virDomainObjWait for this call to
virDomainObjBroadcast. But with the current migration code, I don't think the
connect close callback is needed. Is there anything to do when the connection to
destination libvirtd closes?
Regards,
Jim
+}
+
+/* On P2P mode there is only the Perform3 phase and we need to handle
+ * the connection with the destination libvirtd and perform the migration.
+ * Here we first tackle the first part of it, and libxlDoMigrationP2P handles
+ * the migration process with an established virConnectPtr to the destination.
+ */
+int
+libxlDomainMigrationPerformP2P(libxlDriverPrivatePtr driver,
+ virDomainObjPtr vm,
+ virConnectPtr sconn,
+ const char *xmlin,
+ const char *dconnuri,
+ const char *uri_str ATTRIBUTE_UNUSED,
+ const char *dname,
+ unsigned int flags)
+{
+ int ret = -1;
+ int keepAliveInterval = 5;
+ int keepAliveCount = 5;
+ bool useParams;
+ virConnectPtr dconn = NULL;
+ virErrorPtr orig_err = NULL;
+
+ virObjectUnlock(vm);
+ dconn = virConnectOpenAuth(dconnuri, &virConnectAuthConfig, 0);
+ virObjectLock(vm);
+
+ if (dconn == NULL) {
+ virReportError(VIR_ERR_OPERATION_FAILED,
+ _("Failed to connect to remote libvirt URI %s: %s"),
+ dconnuri, virGetLastErrorMessage());
+ return ret;
+ }
+
+ if (virConnectSetKeepAlive(dconn, keepAliveInterval,
+ keepAliveCount) < 0)
+ goto cleanup;
+
+ if (virConnectRegisterCloseCallback(dconn, libxlMigrationConnectionClosed,
+ vm, NULL) < 0) {
+ goto cleanup;
+ }
+
+ virObjectUnlock(vm);
+ useParams = VIR_DRV_SUPPORTS_FEATURE(dconn->driver, dconn,
+ VIR_DRV_FEATURE_MIGRATION_PARAMS);
+ virObjectLock(vm);
+
+ if (!useParams) {
+ virReportError(VIR_ERR_OPERATION_FAILED, "%s",
+ _("Destination libvirt does not support migration with
extensible parameters"));
+ goto cleanup;
+ }
+
+ ret = libxlDoMigrateP2P(driver, vm, sconn, xmlin, dconn, dconnuri,
+ dname, uri_str, flags);
+
+ cleanup:
+ orig_err = virSaveLastError();
+ virObjectUnlock(vm);
+ virConnectUnregisterCloseCallback(dconn, libxlMigrationConnectionClosed);
+ virObjectUnref(dconn);
+ virObjectLock(vm);
+ if (orig_err) {
+ virSetError(orig_err);
+ virFreeError(orig_err);
+ }
+ return ret;
+}
+
int
libxlDomainMigrationPerform(libxlDriverPrivatePtr driver,
virDomainObjPtr vm,
diff --git a/src/libxl/libxl_migration.h b/src/libxl/libxl_migration.h
index 20b45d8..0f83bb4 100644
--- a/src/libxl/libxl_migration.h
+++ b/src/libxl/libxl_migration.h
@@ -28,6 +28,7 @@
# define LIBXL_MIGRATION_FLAGS \
(VIR_MIGRATE_LIVE | \
+ VIR_MIGRATE_PEER2PEER | \
VIR_MIGRATE_UNDEFINE_SOURCE | \
VIR_MIGRATE_PAUSED)
@@ -56,6 +57,16 @@ libxlDomainMigrationPrepare(virConnectPtr dconn,
unsigned int flags);
int
+libxlDomainMigrationPerformP2P(libxlDriverPrivatePtr driver,
+ virDomainObjPtr vm,
+ virConnectPtr sconn,
+ const char *dom_xml,
+ const char *dconnuri,
+ const char *uri_str,
+ const char *dname,
+ unsigned int flags);
+
+int
libxlDomainMigrationPerform(libxlDriverPrivatePtr driver,
virDomainObjPtr vm,
const char *dom_xml,