On Thu, Apr 20, 2017 at 03:49:29 +0000, Shaohe Feng wrote:
Some platform NUMA node does not include cpu, such as Phi.
This patch support CPU less NUMA node.
But there must be one CPU cell node for a guest.
Also must assign the host nodeset for this guest cell node.
Additionally to the review below:
Did qemu always support this? If not, you need to add code which will
allow such configuration only if qemu supports this (adding a capability
bit etc ...).
Also please elaborat how is this better than adding a regular numa node
whith cpus which are disabled. In such case you can still add more cpus
via the hotplug API in case you desire so.
please enable numactl with "--with-numactl" for libvirt
config.
Test this patch:
1. define a numa cell without "cpus", such as cell 1.
<numatune>
<memnode cellid='1' mode='strict' nodeset='0'/>
</numatune>
<cpu>
<numa>
<cell id='0' cpus='0-1' memory='512000'
unit='KiB'/>
<cell id='1' memory='512000' unit='KiB'/>
</numa>
</cpu>
libvirt can edit and start the VM successfully.
2. define a numa cell without "cpus", without nodeset.
<cpu>
<numa>
<cell id='0' cpus='0-1' memory='512000'
unit='KiB'/>
<cell id='1' memory='512000' unit='KiB'/>
The cpus attribute is not optional in the schema, nor does your patch
make it optional. This will make suxh XML invalid.
</numa>
</cpu>
This case, libvirt will failed to edit the CPUS.
---
src/conf/domain_conf.c | 4 +++
src/conf/numa_conf.c | 89 ++++++++++++++++++++++++++++++++++---------------
src/conf/numa_conf.h | 2 ++
src/qemu/qemu_command.c | 12 ++++---
src/util/virbitmap.c | 10 ++++--
5 files changed, 83 insertions(+), 34 deletions(-)
Chhange such as this require test case addition for the XML parser and
also command line generator.
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index 705deb3..d6e5489 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -17330,6 +17330,10 @@ virDomainDefParseXML(xmlDocPtr xml,
ctxt) < 0)
goto error;
+ if (virDomainNumaCPULessCheck(def->numa) < 0){
+ goto error;
+ }
You did not run make syntax-check prior to posting this patch. Note that
all patches must pass this check prior to be pushed. Make sure your next
posting fixes ALL issues pointed out by the syntax-check tool. I did not
point them out in this review.
+
if (virDomainNumatuneHasPlacementAuto(def->numa) &&
!def->cpumask && !virDomainDefHasVcpuPin(def) &&
!def->cputune.emulatorpin &&
diff --git a/src/conf/numa_conf.c b/src/conf/numa_conf.c
index bfd3703..1b6f7ff 100644
--- a/src/conf/numa_conf.c
+++ b/src/conf/numa_conf.c
@@ -742,34 +742,31 @@ virDomainNumaDefCPUParseXML(virDomainNumaPtr def,
goto cleanup;
}
- if (!(tmp = virXMLPropString(nodes[i], "cpus"))) {
- virReportError(VIR_ERR_XML_ERROR, "%s",
- _("Missing 'cpus' attribute in NUMA
cell"));
- goto cleanup;
- }
-
- if (virBitmapParse(tmp, &def->mem_nodes[cur_cell].cpumask,
- VIR_DOMAIN_CPUMASK_LEN) < 0)
- goto cleanup;
-
- if (virBitmapIsAllClear(def->mem_nodes[cur_cell].cpumask)) {
- virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("NUMA cell %d has no vCPUs assigned"), cur_cell);
- goto cleanup;
- }
- VIR_FREE(tmp);
-
- for (j = 0; j < n; j++) {
- if (j == cur_cell || !def->mem_nodes[j].cpumask)
- continue;
+ tmp = virXMLPropString(nodes[i], "cpus");
+ if (tmp) {
+ if (virBitmapParse(tmp, &def->mem_nodes[cur_cell].cpumask,
+ VIR_DOMAIN_CPUMASK_LEN) < 0)
+ goto cleanup;
- if (virBitmapOverlaps(def->mem_nodes[j].cpumask,
- def->mem_nodes[cur_cell].cpumask)) {
+ if (virBitmapIsAllClear(def->mem_nodes[cur_cell].cpumask)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("NUMA cells %u and %zu have overlapping vCPU
ids"),
- cur_cell, j);
+ _("NUMA cell %d has no vCPUs assigned"),
cur_cell);
goto cleanup;
}
+ VIR_FREE(tmp);
+
+ for (j = 0; j < n; j++) {
+ if (j == cur_cell || !def->mem_nodes[j].cpumask)
+ continue;
+
+ if (virBitmapOverlaps(def->mem_nodes[j].cpumask,
+ def->mem_nodes[cur_cell].cpumask)) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("NUMA cells %u and %zu have overlapping vCPU
ids"),
+ cur_cell, j);
+ goto cleanup;
+ }
+ }
}
ctxt->node = nodes[i];
@@ -808,6 +805,7 @@ virDomainNumaDefCPUFormat(virBufferPtr buf,
char *cpustr;
size_t ncells = virDomainNumaGetNodeCount(def);
size_t i;
+ size_t ncpuless = 0;
if (ncells == 0)
return 0;
@@ -817,12 +815,24 @@ virDomainNumaDefCPUFormat(virBufferPtr buf,
for (i = 0; i < ncells; i++) {
memAccess = virDomainNumaGetNodeMemoryAccessMode(def, i);
- if (!(cpustr = virBitmapFormat(virDomainNumaGetNodeCpumask(def, i))))
- return -1;
+ cpustr = virBitmapFormat(virDomainNumaGetNodeCpumask(def, i));
virBufferAddLit(buf, "<cell");
virBufferAsprintf(buf, " id='%zu'", i);
- virBufferAsprintf(buf, " cpus='%s'", cpustr);
+ if (cpustr && (*cpustr != 0))
+ virBufferAsprintf(buf, " cpus='%s'", cpustr);
+ else {
+ /* Note, at present we only allow cpuless numa node with */
+ /* nodeset assign. */
+ ncpuless++;
+ if (!virDomainNumatuneNodeSpecified(def, i)) {
+ VIR_FREE(cpustr);
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("CPUless NUMA node cellid %zu must be "
+ "specified node set."), i);
+ return -1;
See below.
+ }
+ }
virBufferAsprintf(buf, " memory='%llu'",
virDomainNumaGetNodeMemorySize(def, i));
virBufferAddLit(buf, " unit='KiB'");
@@ -835,6 +845,12 @@ virDomainNumaDefCPUFormat(virBufferPtr buf,
virBufferAdjustIndent(buf, -2);
virBufferAddLit(buf, "</numa>\n");
+ if (ncpuless == ncells) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("At lease one NUMA node should "
+ "include CPU element."));
+ return -1;
This is the wrong place for such check. This formats the XML. At this
point the definition needs to be valid.
+ }
return 0;
}
@@ -861,6 +877,7 @@ virDomainNumaGetMaxCPUID(virDomainNumaPtr numa)
int bit;
bit = virBitmapLastSetBit(virDomainNumaGetNodeCpumask(numa, i));
+ bit = (bit > 0) ? bit : 0;
Please use a if-else construct rather than a ternary operator.
if (bit > ret)
ret = bit;
}
@@ -973,3 +990,21 @@ virDomainNumaGetMemorySize(virDomainNumaPtr numa)
return ret;
}
+
+// NOTE, For some plateforms, there are some node without cpus, such as Phi.
+// We just need do some check for these plateforms, we must assigned nodeset
+// for CPU less node.
Single line comments are not allowed in libvirt. Please use /* */
+int
+virDomainNumaCPULessCheck(virDomainNumaPtr numa)
+{
+ int ret = 0;
+ int i = 0;
+ for (i = 0; i < numa->nmem_nodes; i++){
+ if (!numa->mem_nodes[i].cpumask && !numa->mem_nodes[i].nodeset) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("Cell: %d is a cpuless numa, must specfiy the
nodeset."), i);
+ return -1;
+ }
+ }
+ return ret;
ret is pointless.
+}
diff --git a/src/conf/numa_conf.h b/src/conf/numa_conf.h
index b6a5354..1f711e6 100644
--- a/src/conf/numa_conf.h
+++ b/src/conf/numa_conf.h
@@ -155,5 +155,7 @@ int virDomainNumaDefCPUFormat(virBufferPtr buf, virDomainNumaPtr
def);
unsigned int virDomainNumaGetCPUCountTotal(virDomainNumaPtr numa);
+int virDomainNumaCPULessCheck(virDomainNumaPtr numa);
+
#endif /* __NUMA_CONF_H__ */
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index b2e76ca..b07ca66 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -7665,11 +7665,13 @@ qemuBuildNumaArgStr(virQEMUDriverConfigPtr cfg,
virCommandAddArg(cmd, "-numa");
virBufferAsprintf(&buf, "node,nodeid=%zu", i);
- for (tmpmask = cpumask; tmpmask; tmpmask = next) {
- if ((next = strchr(tmpmask, ',')))
- *(next++) = '\0';
- virBufferAddLit(&buf, ",cpus=");
- virBufferAdd(&buf, tmpmask, -1);
+ if (*cpumask != 0) {
Use the char representation of the nul byte instead of 0.
+ for (tmpmask = cpumask; tmpmask; tmpmask = next) {
+ if ((next = strchr(tmpmask, ',')))
+ *(next++) = '\0';
+ virBufferAddLit(&buf, ",cpus=");
+ virBufferAdd(&buf, tmpmask, -1);
+ }
}
if (needBackend)
diff --git a/src/util/virbitmap.c b/src/util/virbitmap.c
index eac63d9..b2803ce 100644
--- a/src/util/virbitmap.c
+++ b/src/util/virbitmap.c
@@ -953,6 +953,9 @@ virBitmapLastSetBit(virBitmapPtr bitmap)
unsigned long bits;
/* If bitmap is empty then there is no set bit */
+ if (!bitmap)
+ return -1;
This change is not justified and also should be in a separate patch.
+
if (bitmap->map_len == 0)
return -1;
@@ -1039,9 +1042,12 @@ virBitmapCountBits(virBitmapPtr bitmap)
size_t i;
size_t ret = 0;
- for (i = 0; i < bitmap->map_len; i++)
- ret += count_one_bits_l(bitmap->map[i]);
+ if (bitmap == NULL)
+ return ret;
+ for (i = 0; i < bitmap->map_len; i++) {
+ ret += count_one_bits_l(bitmap->map[i]);
+ }
Same here. This is for separate patch and also breaks the coding style.
Additionally I disagree with adding NULL checks here. The calling code
should make sure not to call these.
return ret;
}
--
2.7.4
--
libvir-list mailing list
libvir-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list