On Fri, May 27, 2011 at 06:22:34PM +0800, Wen Congyang wrote:
Hot pluging/unpluging multi PCI device is not supported now. So the
function
of hotplugged PCI device must be 0. When we hot unplug it, we should set release
all functions in the slot.
---
src/qemu/qemu_command.c | 46 +++++++++++++++++++++++++++++++++++++++++++---
src/qemu/qemu_command.h | 1 +
src/qemu/qemu_hotplug.c | 24 ++++++++++++++++--------
3 files changed, 60 insertions(+), 11 deletions(-)
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index 6f9540c..da18719 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -876,9 +876,19 @@ int qemuDomainPCIAddressEnsureAddr(qemuDomainPCIAddressSetPtr
addrs,
virDomainDeviceInfoPtr dev)
{
int ret = 0;
- if (dev->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI)
- ret = qemuDomainPCIAddressReserveAddr(addrs, dev);
- else
+ if (dev->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
+ /* We do not support hotplug multi-function PCI device now, so we should
+ * reserve the whole slot. The function of the PCI device must be 0.
+ */
+ if (dev->addr.pci.function != 0) {
+ qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("Only PCI device addresses with function=0"
+ " are supported"));
+ return -1;
+ }
+
+ ret = qemuDomainPCIAddressReserveSlot(addrs, dev->addr.pci.slot);
+ } else
ret = qemuDomainPCIAddressSetNextAddr(addrs, dev);
Since the if() uses {}, you should add {} around the else clause
too.
return ret;
}
@@ -914,6 +924,36 @@ int qemuDomainPCIAddressReleaseFunction(qemuDomainPCIAddressSetPtr
addrs,
return qemuDomainPCIAddressReleaseAddr(addrs, &dev);
}
+int qemuDomainPCIAddressReleaseSlot(qemuDomainPCIAddressSetPtr addrs, int slot)
+{
+ virDomainDeviceInfo dev;
+ char *addr;
+ int function;
+ int ret = 0;
+
+ dev.addr.pci.domain = 0;
+ dev.addr.pci.bus = 0;
+ dev.addr.pci.slot = slot;
+
+ for (function = 0; function <= QEMU_PCI_ADDRESS_LAST_FUNCTION; function++) {
+ addr = qemuPCIAddressAsString(&dev);
+ if (!addr)
+ return -1;
+
+ if (!virHashLookup(addrs->used, addr)) {
+ VIR_FREE(addr);
+ continue;
+ }
+
+ VIR_FREE(addr);
+
+ if (qemuDomainPCIAddressReleaseFunction(addrs, slot, function) < 0)
+ ret = -1;
+ }
+
+ return ret;
+}
+
void qemuDomainPCIAddressSetFree(qemuDomainPCIAddressSetPtr addrs)
{
if (!addrs)
diff --git a/src/qemu/qemu_command.h b/src/qemu/qemu_command.h
index 4c83182..d7673ad 100644
--- a/src/qemu/qemu_command.h
+++ b/src/qemu/qemu_command.h
@@ -160,6 +160,7 @@ int qemuDomainPCIAddressReleaseAddr(qemuDomainPCIAddressSetPtr
addrs,
virDomainDeviceInfoPtr dev);
int qemuDomainPCIAddressReleaseFunction(qemuDomainPCIAddressSetPtr addrs,
int slot, int function);
+int qemuDomainPCIAddressReleaseSlot(qemuDomainPCIAddressSetPtr addrs, int slot);
void qemuDomainPCIAddressSetFree(qemuDomainPCIAddressSetPtr addrs);
int qemuAssignDevicePCISlots(virDomainDefPtr def, qemuDomainPCIAddressSetPtr addrs);
diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c
index e98c677..9f0ec06 100644
--- a/src/qemu/qemu_hotplug.c
+++ b/src/qemu/qemu_hotplug.c
@@ -221,7 +221,8 @@ error:
if (qemuCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE) &&
(disk->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) &&
releaseaddr &&
- qemuDomainPCIAddressReleaseAddr(priv->pciaddrs, &disk->info) < 0)
+ qemuDomainPCIAddressReleaseSlot(priv->pciaddrs,
+ disk->info.addr.pci.slot) < 0)
VIR_WARN("Unable to release PCI address on %s", disk->src);
if (virSecurityManagerRestoreImageLabel(driver->securityManager,
@@ -290,7 +291,8 @@ cleanup:
qemuCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE) &&
(controller->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) &&
releaseaddr &&
- qemuDomainPCIAddressReleaseAddr(priv->pciaddrs, &controller->info)
< 0)
+ qemuDomainPCIAddressReleaseSlot(priv->pciaddrs,
+ controller->info.addr.pci.slot) < 0)
VIR_WARN("Unable to release PCI address on controller");
VIR_FREE(devstr);
@@ -697,7 +699,8 @@ cleanup:
qemuCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE) &&
(net->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) &&
releaseaddr &&
- qemuDomainPCIAddressReleaseAddr(priv->pciaddrs, &net->info) < 0)
+ qemuDomainPCIAddressReleaseSlot(priv->pciaddrs,
+ net->info.addr.pci.slot) < 0)
VIR_WARN("Unable to release PCI address on NIC");
if (ret != 0)
@@ -828,7 +831,8 @@ error:
if (qemuCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE) &&
(hostdev->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) &&
releaseaddr &&
- qemuDomainPCIAddressReleaseAddr(priv->pciaddrs, &hostdev->info) <
0)
+ qemuDomainPCIAddressReleaseSlot(priv->pciaddrs,
+ hostdev->info.addr.pci.slot) < 0)
VIR_WARN("Unable to release PCI address on host device");
qemuDomainReAttachHostdevDevices(driver, &hostdev, 1);
@@ -1198,7 +1202,8 @@ int qemuDomainDetachPciDiskDevice(struct qemud_driver *driver,
qemuAuditDisk(vm, detach, NULL, "detach", ret >= 0);
if (qemuCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE) &&
- qemuDomainPCIAddressReleaseAddr(priv->pciaddrs, &detach->info) <
0)
+ qemuDomainPCIAddressReleaseSlot(priv->pciaddrs,
+ detach->info.addr.pci.slot) < 0)
VIR_WARN("Unable to release PCI address on %s",
dev->data.disk->src);
virDomainDiskRemove(vm->def, i);
@@ -1430,7 +1435,8 @@ int qemuDomainDetachPciControllerDevice(struct qemud_driver
*driver,
}
if (qemuCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE) &&
- qemuDomainPCIAddressReleaseAddr(priv->pciaddrs, &detach->info) <
0)
+ qemuDomainPCIAddressReleaseSlot(priv->pciaddrs,
+ detach->info.addr.pci.slot) < 0)
VIR_WARN("Unable to release PCI address on controller");
virDomainControllerDefFree(detach);
@@ -1529,7 +1535,8 @@ int qemuDomainDetachNetDevice(struct qemud_driver *driver,
qemuAuditNet(vm, detach, NULL, "detach", true);
if (qemuCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE) &&
- qemuDomainPCIAddressReleaseAddr(priv->pciaddrs, &detach->info) <
0)
+ qemuDomainPCIAddressReleaseSlot(priv->pciaddrs,
+ detach->info.addr.pci.slot) < 0)
VIR_WARN("Unable to release PCI address on NIC");
virDomainConfNWFilterTeardown(detach);
@@ -1653,7 +1660,8 @@ int qemuDomainDetachHostPciDevice(struct qemud_driver *driver,
}
if (qemuCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE) &&
- qemuDomainPCIAddressReleaseAddr(priv->pciaddrs, &detach->info) <
0)
+ qemuDomainPCIAddressReleaseSlot(priv->pciaddrs,
+ detach->info.addr.pci.slot) < 0)
VIR_WARN("Unable to release PCI address on host device");
if (vm->def->nhostdevs > 1) {
ACK
Daniel
--
|:
http://berrange.com -o-
http://www.flickr.com/photos/dberrange/ :|
|:
http://libvirt.org -o-
http://virt-manager.org :|
|:
http://autobuild.org -o-
http://search.cpan.org/~danberr/ :|
|:
http://entangle-photo.org -o-
http://live.gnome.org/gtk-vnc :|