Re: [libvirt] how to assign an ip when assign a NIC or VF to the Virtual Machine?

On Sat, May 07, 2011 at 11:24:23PM +0800, guan qin wrote: It doesn't work like this. Just like with real hardware, all the virtual hardware has is a MAC address. The (real or virtual) machine has to use some other method to get an IP address and hostname after it has booted. As with real machines, either it does that using DHCP, or it has the IP address hard-coded somewhere on disk. The best solution is to create a separate DHCP service which assigns a specific IP address to the known MAC address of the NIC/VF. You can get the MAC address using "virsh dumpxml". Another solution would be to edit the guest before booting it and give it the address you want it to have. eg for RHEL and Fedora guests: guestfish -i -d MyGuest -- \ upload - /etc/sysconfig/network-scripts/ifcfg-eth0 <<_EOF DEVICE=eth0 IPADDR=192.168.1.2 NETMASK=255.255.255.0 NETWORK=192.168.1.0 BROADCAST=192.168.1.255 ONBOOT=yes _EOF Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones virt-p2v converts physical machines to virtual machines. Boot with a live CD or over the network (PXE) and turn machines into Xen guests. http://et.redhat.com/~rjones/virt-p2v