[libvirt] [PATCH 8/8] hostdev: Add iSCSI hostdev XML

Introduce a new structure to handle an iSCSI host device based on the existing virDomainHostdevSubsysSCSI by adding a "protocol='iscsi'" to the <source/> element. The hostdev structure mimics the existing <disk/> element for an iSCSI device (network) device. New XML is: <hostdev mode='subsystem' type='scsi' managed='yes'> <auth username='myname'> <secret type='iscsi' usage='mycluster_myname'/> </auth> <source protocol='iscsi' name='iqn.1992-01.com.example'> <host name='example.org' port='3260'/> </source> <address type='drive' controller='0' bus='0' target='2' unit='5'/> </hostdev> The controller element will mimic the existing scsi_host code insomuch as when 'lsi' and 'virtio-scsi' are used. Signed-off-by: John Ferlan <jferlan(a)redhat.com&gt; --- docs/formatdomain.html.in | 142 ++++++++++++------- docs/schemas/domaincommon.rng | 46 ++++++- src/conf/domain_conf.c | 152 ++++++++++++++++++--- .../qemuxml2argv-hostdev-scsi-lsi-iscsi-auth.args | 14 ++ .../qemuxml2argv-hostdev-scsi-lsi-iscsi-auth.xml | 46 +++++++ .../qemuxml2argv-hostdev-scsi-lsi-iscsi.args | 14 ++ .../qemuxml2argv-hostdev-scsi-lsi-iscsi.xml | 40 ++++++ ...emuxml2argv-hostdev-scsi-virtio-iscsi-auth.args | 16 +++ ...qemuxml2argv-hostdev-scsi-virtio-iscsi-auth.xml | 46 +++++++ .../qemuxml2argv-hostdev-scsi-virtio-iscsi.args | 16 +++ .../qemuxml2argv-hostdev-scsi-virtio-iscsi.xml | 40 ++++++ tests/qemuxml2argvtest.c | 16 +++ tests/qemuxml2xmltest.c | 5 + 13 files changed, 524 insertions(+), 69 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi-auth.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi-auth.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi-auth.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi-auth.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi.xml diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index b69da4c..82b9091 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -2781,57 +2781,107 @@ &lt;/devices&gt; ...</pre> + + <p>or:</p> + +<pre> + ... + &lt;devices&gt; + &lt;hostdev mode='subsystem' type='scsi'&gt; + &lt;source protocol='iscsi' name='iqn.2014-08.com.example:iscsi-nopool/1'&gt; + &lt;host name='example.com' port='3260'/&gt; + &lt;/source&gt; + &lt;auth username='myuser'&gt; + &lt;secret type='iscsi' usage='libvirtiscsi'/&gt; + &lt;/auth&gt; + &lt;address type='drive' controller='0' bus='0' target='0' unit='0'/&gt; + &lt;/hostdev&gt; + &lt;/devices&gt; + ...</pre> + <dl> <dt><code>hostdev</code></dt> <dd>The <code>hostdev</code> element is the main container for describing - host devices. For usb device passthrough <code>mode</code> is always - "subsystem" and <code>type</code> is "usb" for a USB device, "pci" - for a PCI device and "scsi" for a SCSI device. When - <code>managed</code> is "yes" for a PCI - device, it is detached from the host before being passed on to - the guest, and reattached to the host after the guest exits. - If <code>managed</code> is omitted or "no", and for USB - devices, the user is responsible to - call <code>virNodeDeviceDettach</code> (or <code>virsh - nodedev-dettach</code>) before starting the guest or - hot-plugging the device, - and <code>virNodeDeviceReAttach</code> (or <code>virsh - nodedev-reattach</code>) after hot-unplug or stopping the - guest. For SCSI device, user is responsible to make sure the device - is not used by host. - The optional <code>sgio</code> (<span class="since">since 1.0.6</span>) - attribute indicates whether the kernel will filter unprivileged - SG_IO commands for the disk, valid settings are "filtered" or - "unfiltered". Defaults to "filtered". + host devices. For each device, the <code>mode</code> is always + "subsystem" and the <code>type</code> is one of the following values + with additional attributes noted. + <dl> + <dt>usb</dt> + <dd>For USB devices, the user is responsible to call + <code>virNodeDeviceDettach</code> (or + <code>virsh nodedev-dettach</code>) before starting the guest + or hot-plugging the device and <code>virNodeDeviceReAttach</code> + (or <code>virsh nodedev-reattach</code>) after hot-unplug or + stopping the guest. + </dd> + <dt>pci</dt> + <dd>For PCI devices, when <code>managed</code> is "yes" it is + detached from the host before being passed on to the guest + and reattached to the host after the guest exits. If + <code>managed</code> is omitted or "no", follow the steps + described for a USB device to detach before starting the + guest or hot-plugging and reattach after stopping the guest + or hot-unplug. + </dd> + <dt>scsi</dt> + <dd>For SCSI devices, user is responsible to make sure the device + is not used by host. The optional <code>sgio</code> + (<span class="since">since 1.0.6</span>) attribute indicates + whether the kernel will filter unprivileged SG_IO commands for + the disk, valid settings are "filtered" or "unfiltered". + The default is "filtered". + </dd> + </dl> </dd> <dt><code>source</code></dt> - <dd>The source element describes the device as seen from the host. - The USB device can either be addressed by vendor / product id using the - <code>vendor</code> and <code>product</code> elements or by the device's - address on the hosts using the <code>address</code> element. PCI devices - on the other hand can only be described by their <code>address</code>. - SCSI devices are described by both the <code>adapter</code> and - <code>address</code> elements. - - <span class="since">Since 1.0.0</span>, the <code>source</code> element - of USB devices may contain <code>startupPolicy</code> attribute which can - be used to define policy what to do if the specified host USB device is - not found. The attribute accepts the following values: - <table class="top_table"> - <tr> - <td> mandatory </td> - <td> fail if missing for any reason (the default) </td> - </tr> - <tr> - <td> requisite </td> - <td> fail if missing on boot up, - drop if missing on migrate/restore/revert </td> - </tr> - <tr> - <td> optional </td> - <td> drop if missing at any start attempt </td> - </tr> - </table> + <dd>The source element describes the device as seen from the host using + the following mechanism to describe: + <dl> + <dt>usb</dt> + <dd>The USB device can either be addressed by vendor / product id + using the <code>vendor</code> and <code>product</code> elements + or by the device's address on the host using the + <code>address</code> element. + <p> + <span class="since">Since 1.0.0</span>, the <code>source</code> + element of USB devices may contain <code>startupPolicy</code> + attribute which can be used to define policy what to do if the + specified host USB device is not found. The attribute accepts + the following values: + </p> + <table class="top_table"> + <tr> + <td> mandatory </td> + <td> fail if missing for any reason (the default) </td> + </tr> + <tr> + <td> requisite </td> + <td> fail if missing on boot up, + drop if missing on migrate/restore/revert </td> + </tr> + <tr> + <td> optional </td> + <td> drop if missing at any start attempt </td> + </tr> + </table> + </dd> + <dt>pci</dt> + <dd>PCI devices can only be described by their <code>address</code>. + </dd> + <dt>scsi</dt> + <dd>SCSI devices are described by both the <code>adapter</code> + and <code>address</code> elements. + <p> + <span class="since">Since 1.2.7</span>, the <code>source</code> + element of a SCSI device may contain the <code>protocol</code> + attribute. When the attribute is set to "iscsi", the host + device XML follows the network <a href="#elementsDisks">disk</a> + device using the same <code>name</code> attribute and optionally + using the <code>auth</code> element to provide the authentication + credentials to the iSCSI server. + </p> + </dd> + </dl> </dd> <dt><code>vendor</code>, <code>product</code></dt> <dd>The <code>vendor</code> and <code>product</code> elements each have an diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng index 7be028d..e54f30a 100644 --- a/docs/schemas/domaincommon.rng +++ b/docs/schemas/domaincommon.rng @@ -3502,13 +3502,47 @@ </choice> </attribute> </optional> + <optional> + <ref name='diskAuth'/> + </optional> <element name="source"> - <interleave> - <ref name="sourceinfoadapter"/> - <element name="address"> - <ref name="scsiaddress"/> - </element> - </interleave> + <optional> + <attribute name="protocol"> + <choice> + <value>iscsi</value> + </choice> + </attribute> + <attribute name="name"> + <text/> + </attribute> + </optional> + <choice> + <group> + <interleave> + <ref name="sourceinfoadapter"/> + <element name="address"> + <ref name="scsiaddress"/> + </element> + </interleave> + </group> + <group> + <interleave> + <oneOrMore> + <element name='host'> + <attribute name='name'> + <text/> + </attribute> + <optional> + <attribute name='port'> + <ref name="PortNumber"/> + </attribute> + </optional> + <empty/> + </element> + </oneOrMore> + </interleave> + </group> + </choice> </element> </define> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 814ab87..3bba887 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -604,6 +604,11 @@ VIR_ENUM_IMPL(virDomainHostdevSubsysPCIBackend, "vfio", "xen") +VIR_ENUM_IMPL(virDomainHostdevSubsysSCSIProtocol, + VIR_DOMAIN_HOSTDEV_SCSI_PROTOCOL_TYPE_LAST, + "default", + "iscsi") + VIR_ENUM_IMPL(virDomainHostdevCaps, VIR_DOMAIN_HOSTDEV_CAPS_TYPE_LAST, "storage", "misc", @@ -4198,10 +4203,93 @@ virDomainHostdevSubsysSCSIHostDefParseXML(xmlNodePtr sourcenode, } static int +virDomainHostdevSubsysSCSIiSCSIDefParseXML(xmlNodePtr sourcenode, + xmlNodePtr authnode, + virDomainHostdevSubsysSCSIPtr def) +{ + int ret = -1; + int auth_secret_usage = -1; + virStorageAuthDefPtr authdef = NULL; + virDomainHostdevSubsysSCSIiSCSIPtr iscsisrc = &def->u.iscsi; + + /* Similar to virDomainDiskSourceParse for a VIR_STORAGE_TYPE_NETWORK */ + + if (!(iscsisrc->path = virXMLPropString(sourcenode, "name"))) { + virReportError(VIR_ERR_XML_ERROR, "%s", + _("missing iSCSI hostdev source path name")); + goto cleanup; + } + + if (virDomainStorageHostParse(sourcenode, &iscsisrc->hosts, + &iscsisrc->nhosts) < 0) + goto cleanup; + + if (iscsisrc->nhosts < 1) { + virReportError(VIR_ERR_XML_ERROR, "%s", + _("missing the host address for the iSCSI hostdev")); + goto cleanup; + } + if (iscsisrc->nhosts > 1) { + virReportError(VIR_ERR_XML_ERROR, "%s", + _("only one source host address may be specified " + "for the iSCSI hostdev")); + goto cleanup; + } + + if (authnode) { + if (!(authdef = virStorageAuthDefParse(sourcenode->doc, authnode))) + goto cleanup; + if ((auth_secret_usage = + virSecretUsageTypeFromString(authdef->secrettype)) < 0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("invalid secret type %s"), + authdef->secrettype); + goto cleanup; + } + if (auth_secret_usage != VIR_SECRET_USAGE_TYPE_ISCSI) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("hostdev invalid secret type '%s'"), + authdef->secrettype); + goto cleanup; + } + iscsisrc->auth = authdef; + authdef = NULL; + } + ret = 0; + + cleanup: + virStorageAuthDefFree(authdef); + return ret; +} + +static int virDomainHostdevSubsysSCSIDefParseXML(xmlNodePtr sourcenode, + xmlNodePtr authnode, virDomainHostdevSubsysSCSIPtr scsisrc) { - return virDomainHostdevSubsysSCSIHostDefParseXML(sourcenode, scsisrc); + char *protocol = NULL; + int ret = -1; + + if ((protocol = virXMLPropString(sourcenode, "protocol"))) { + scsisrc->protocol = + virDomainHostdevSubsysSCSIProtocolTypeFromString(protocol); + if (scsisrc->protocol < 0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("Unknown SCSI subsystem protcol '%s'"), + protocol); + goto cleanup; + } + } + + if (scsisrc->protocol == VIR_DOMAIN_HOSTDEV_SCSI_PROTOCOL_TYPE_ISCSI) + ret = virDomainHostdevSubsysSCSIiSCSIDefParseXML(sourcenode, authnode, + scsisrc); + else + ret = virDomainHostdevSubsysSCSIHostDefParseXML(sourcenode, scsisrc); + + cleanup: + VIR_FREE(protocol); + return ret; } /* Check if a drive type address $controller:0:0:$unit is already @@ -4346,6 +4434,7 @@ virDomainHostdevDefParseXMLSubsys(xmlNodePtr node, virDomainHostdevDefPtr def, unsigned int flags) { + xmlNodePtr authnode; xmlNodePtr sourcenode; char *managed = NULL; char *sgio = NULL; @@ -4441,7 +4530,9 @@ virDomainHostdevDefParseXMLSubsys(xmlNodePtr node, break; case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI: - if (virDomainHostdevSubsysSCSIDefParseXML(sourcenode, scsisrc) < 0) + authnode = virXPathNode("./auth", ctxt); + if (virDomainHostdevSubsysSCSIDefParseXML(sourcenode, authnode, + scsisrc) < 0) goto error; break; @@ -15558,6 +15649,7 @@ virDomainHostdevDefFormatSubsys(virBufferPtr buf, virDomainHostdevSubsysPCIPtr pcisrc = &def->source.subsys.u.pci; virDomainHostdevSubsysSCSIPtr scsisrc = &def->source.subsys.u.scsi; virDomainHostdevSubsysSCSIHostPtr scsihostsrc = &scsisrc->u.host; + virDomainHostdevSubsysSCSIiSCSIPtr iscsisrc = &scsisrc->u.iscsi; if (def->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI && pcisrc->backend != VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT) { @@ -15573,18 +15665,36 @@ virDomainHostdevDefFormatSubsys(virBufferPtr buf, virBufferAsprintf(buf, "<driver name='%s'/>\n", backend); } + if (def->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI && + scsisrc->protocol == VIR_DOMAIN_HOSTDEV_SCSI_PROTOCOL_TYPE_ISCSI) { + if (iscsisrc->auth) { + if (virStorageAuthDefFormat(buf, iscsisrc->auth) < 0) + return -1; + } + } + virBufferAddLit(buf, "<source"); - if (def->startupPolicy) { - const char *policy; - policy = virDomainStartupPolicyTypeToString(def->startupPolicy); - virBufferAsprintf(buf, " startupPolicy='%s'", policy); + if (def->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) { + if (def->startupPolicy) { + const char *policy; + policy = virDomainStartupPolicyTypeToString(def->startupPolicy); + virBufferAsprintf(buf, " startupPolicy='%s'", policy); + } + if (usbsrc->autoAddress && (flags & VIR_DOMAIN_XML_MIGRATABLE)) + virBufferAddLit(buf, " autoAddress='yes'"); + + if (def->missing && !(flags & VIR_DOMAIN_XML_INACTIVE)) + virBufferAddLit(buf, " missing='yes'"); } - if (usbsrc->autoAddress && (flags & VIR_DOMAIN_XML_MIGRATABLE)) - virBufferAddLit(buf, " autoAddress='yes'"); - if (def->missing && - !(flags & VIR_DOMAIN_XML_INACTIVE)) - virBufferAddLit(buf, " missing='yes'"); + if (def->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI && + scsisrc->protocol == VIR_DOMAIN_HOSTDEV_SCSI_PROTOCOL_TYPE_ISCSI) { + const char *protocol = + virDomainHostdevSubsysSCSIProtocolTypeToString(scsisrc->protocol); + + virBufferAsprintf(buf, " protocol='%s' name='%s'", + protocol, iscsisrc->path); + } virBufferAddLit(buf, ">\n"); @@ -15625,12 +15735,20 @@ virDomainHostdevDefFormatSubsys(virBufferPtr buf, } break; case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI: - virBufferAsprintf(buf, "<adapter name='%s'/>\n", - scsihostsrc->adapter); - virBufferAsprintf(buf, "<address %sbus='%d' target='%d' unit='%d'/>\n", - includeTypeInAddr ? "type='scsi' " : "", - scsihostsrc->bus, scsihostsrc->target, - scsihostsrc->unit); + if (scsisrc->protocol == VIR_DOMAIN_HOSTDEV_SCSI_PROTOCOL_TYPE_ISCSI) { + virBufferAddLit(buf, "<host"); + virBufferEscapeString(buf, " name='%s'", iscsisrc->hosts[0].name); + virBufferEscapeString(buf, " port='%s'", iscsisrc->hosts[0].port); + virBufferAddLit(buf, "/>\n"); + } else { + virBufferAsprintf(buf, "<adapter name='%s'/>\n", + scsihostsrc->adapter); + virBufferAsprintf(buf, + "<address %sbus='%d' target='%d' unit='%d'/>\n", + includeTypeInAddr ? "type='scsi' " : "", + scsihostsrc->bus, scsihostsrc->target, + scsihostsrc->unit); + } break; default: virReportError(VIR_ERR_INTERNAL_ERROR, diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi-auth.args b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi-auth.args new file mode 100644 index 0000000..6638dce --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi-auth.args @@ -0,0 +1,14 @@ +LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \ +/usr/bin/qemu -S -M \ +pc -m 214 -smp 1 -nographic -nodefaults -monitor \ +unix:/tmp/test-monitor,server,nowait -no-acpi -boot c \ +-device lsi,id=scsi0,bus=pci.0,addr=0x3 -usb \ +-drive file=/dev/HostVG/QEMUGuest2,if=none,id=drive-ide0-0-0 \ +-device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ +-drive file=iscsi://myname:AQCVn5hO6HzFAhAAq0NCv8jtJcIcE+HOBlMQ1A@example.org\ +:3260/iqn.1992-01.com.example,if=none,format=raw,id=drive-hostdev0 \ +-device scsi-generic,bus=scsi0.0,scsi-id=4,drive=drive-hostdev0,id=hostdev0 \ +-drive file=iscsi://myname:AQCVn5hO6HzFAhAAq0NCv8jtJcIcE+HOBlMQ1A@example.org\ +:3260/iqn.1992-01.com.example/1,if=none,format=raw,id=drive-hostdev1 \ +-device scsi-generic,bus=scsi0.0,scsi-id=5,drive=drive-hostdev1,id=hostdev1 \ +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi-auth.xml b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi-auth.xml new file mode 100644 index 0000000..e5b7172 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi-auth.xml @@ -0,0 +1,46 @@ +<domain type='qemu'> + <name>QEMUGuest2</name> + <uuid>c7a5fdbd-edaf-9466-926a-d65c16db1809</uuid> + <memory unit='KiB'>219100</memory> + <currentMemory unit='KiB'>219100</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='disk'> + <source dev='/dev/HostVG/QEMUGuest2'/> + <target dev='hda' bus='ide'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <controller type='scsi' index='0'/> + <controller type='usb' index='0'/> + <controller type='ide' index='0'/> + <controller type='pci' index='0' model='pci-root'/> + <hostdev mode='subsystem' type='scsi' managed='yes'> + <auth username='myname'> + <secret type='iscsi' usage='mycluster_myname'/> + </auth> + <source protocol='iscsi' name='iqn.1992-01.com.example'> + <host name='example.org' port='3260'/> + </source> + <address type='drive' controller='0' bus='0' target='0' unit='4'/> + </hostdev> + <hostdev mode='subsystem' type='scsi' managed='yes'> + <auth username='myname'> + <secret type='iscsi' usage='mycluster_myname'/> + </auth> + <source protocol='iscsi' name='iqn.1992-01.com.example/1'> + <host name='example.org' port='3260'/> + </source> + <address type='drive' controller='0' bus='0' target='0' unit='5'/> + </hostdev> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi.args b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi.args new file mode 100644 index 0000000..2aebe9c --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi.args @@ -0,0 +1,14 @@ +LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \ +/usr/bin/qemu -S -M \ +pc -m 214 -smp 1 -nographic -nodefaults -monitor \ +unix:/tmp/test-monitor,server,nowait -no-acpi -boot c \ +-device lsi,id=scsi0,bus=pci.0,addr=0x3 -usb \ +-drive file=/dev/HostVG/QEMUGuest2,if=none,id=drive-ide0-0-0 \ +-device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ +-drive file=iscsi://example.org:3260/iqn.1992-01.com.example,if=none,\ +format=raw,id=drive-hostdev0 \ +-device scsi-generic,bus=scsi0.0,scsi-id=4,drive=drive-hostdev0,id=hostdev0 \ +-drive file=iscsi://example.org:3260/iqn.1992-01.com.example/1,if=none,\ +format=raw,id=drive-hostdev1 \ +-device scsi-generic,bus=scsi0.0,scsi-id=5,drive=drive-hostdev1,id=hostdev1 \ +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi.xml b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi.xml new file mode 100644 index 0000000..8a05099 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi.xml @@ -0,0 +1,40 @@ +<domain type='qemu'> + <name>QEMUGuest2</name> + <uuid>c7a5fdbd-edaf-9466-926a-d65c16db1809</uuid> + <memory unit='KiB'>219100</memory> + <currentMemory unit='KiB'>219100</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='disk'> + <source dev='/dev/HostVG/QEMUGuest2'/> + <target dev='hda' bus='ide'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <controller type='scsi' index='0'/> + <controller type='usb' index='0'/> + <controller type='ide' index='0'/> + <controller type='pci' index='0' model='pci-root'/> + <hostdev mode='subsystem' type='scsi' managed='yes'> + <source protocol='iscsi' name='iqn.1992-01.com.example'> + <host name='example.org' port='3260'/> + </source> + <address type='drive' controller='0' bus='0' target='0' unit='4'/> + </hostdev> + <hostdev mode='subsystem' type='scsi' managed='yes'> + <source protocol='iscsi' name='iqn.1992-01.com.example/1'> + <host name='example.org' port='3260'/> + </source> + <address type='drive' controller='0' bus='0' target='0' unit='5'/> + </hostdev> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi-auth.args b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi-auth.args new file mode 100644 index 0000000..7fd3a00 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi-auth.args @@ -0,0 +1,16 @@ +LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \ +/usr/bin/qemu -S -M \ +pc -m 214 -smp 1 -nographic -nodefaults -monitor \ +unix:/tmp/test-monitor,server,nowait -no-acpi -boot c \ +-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -usb \ +-drive file=/dev/HostVG/QEMUGuest2,if=none,id=drive-ide0-0-0 \ +-device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ +-drive file=iscsi://myname:AQCVn5hO6HzFAhAAq0NCv8jtJcIcE+HOBlMQ1A@example.org\ +:3260/iqn.1992-01.com.example,if=none,format=raw,id=drive-hostdev0 \ +-device scsi-generic,bus=scsi0.0,channel=0,scsi-id=2,lun=4,\ +drive=drive-hostdev0,id=hostdev0 \ +-drive file=iscsi://myname:AQCVn5hO6HzFAhAAq0NCv8jtJcIcE+HOBlMQ1A@example.org\ +:3260/iqn.1992-01.com.example/1,if=none,format=raw,id=drive-hostdev1 \ +-device scsi-generic,bus=scsi0.0,channel=0,scsi-id=2,lun=5,\ +drive=drive-hostdev1,id=hostdev1 \ +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi-auth.xml b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi-auth.xml new file mode 100644 index 0000000..f504e88 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi-auth.xml @@ -0,0 +1,46 @@ +<domain type='qemu'> + <name>QEMUGuest2</name> + <uuid>c7a5fdbd-edaf-9466-926a-d65c16db1809</uuid> + <memory unit='KiB'>219100</memory> + <currentMemory unit='KiB'>219100</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='disk'> + <source dev='/dev/HostVG/QEMUGuest2'/> + <target dev='hda' bus='ide'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <controller type='scsi' index='0' model='virtio-scsi'/> + <controller type='usb' index='0'/> + <controller type='ide' index='0'/> + <controller type='pci' index='0' model='pci-root'/> + <hostdev mode='subsystem' type='scsi' managed='yes'> + <auth username='myname'> + <secret type='iscsi' usage='mycluster_myname'/> + </auth> + <source protocol='iscsi' name='iqn.1992-01.com.example'> + <host name='example.org' port='3260'/> + </source> + <address type='drive' controller='0' bus='0' target='2' unit='4'/> + </hostdev> + <hostdev mode='subsystem' type='scsi' managed='yes'> + <auth username='myname'> + <secret type='iscsi' usage='mycluster_myname'/> + </auth> + <source protocol='iscsi' name='iqn.1992-01.com.example/1'> + <host name='example.org' port='3260'/> + </source> + <address type='drive' controller='0' bus='0' target='2' unit='5'/> + </hostdev> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi.args b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi.args new file mode 100644 index 0000000..e4b6e97 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi.args @@ -0,0 +1,16 @@ +LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \ +/usr/bin/qemu -S -M \ +pc -m 214 -smp 1 -nographic -nodefaults -monitor \ +unix:/tmp/test-monitor,server,nowait -no-acpi -boot c \ +-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 -usb \ +-drive file=/dev/HostVG/QEMUGuest2,if=none,id=drive-ide0-0-0 \ +-device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \ +-drive file=iscsi://example.org:3260/iqn.1992-01.com.example,if=none,\ +format=raw,id=drive-hostdev0 \ +-device scsi-generic,bus=scsi0.0,channel=0,scsi-id=2,lun=4,\ +drive=drive-hostdev0,id=hostdev0 \ +-drive file=iscsi://example.org:3260/iqn.1992-01.com.example/1,if=none,\ +format=raw,id=drive-hostdev1 \ +-device scsi-generic,bus=scsi0.0,channel=0,scsi-id=2,lun=5,\ +drive=drive-hostdev1,id=hostdev1 \ +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi.xml b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi.xml new file mode 100644 index 0000000..13c0930 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi.xml @@ -0,0 +1,40 @@ +<domain type='qemu'> + <name>QEMUGuest2</name> + <uuid>c7a5fdbd-edaf-9466-926a-d65c16db1809</uuid> + <memory unit='KiB'>219100</memory> + <currentMemory unit='KiB'>219100</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='disk'> + <source dev='/dev/HostVG/QEMUGuest2'/> + <target dev='hda' bus='ide'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <controller type='scsi' index='0' model='virtio-scsi'/> + <controller type='usb' index='0'/> + <controller type='ide' index='0'/> + <controller type='pci' index='0' model='pci-root'/> + <hostdev mode='subsystem' type='scsi' managed='yes'> + <source protocol='iscsi' name='iqn.1992-01.com.example'> + <host name='example.org' port='3260'/> + </source> + <address type='drive' controller='0' bus='0' target='2' unit='4'/> + </hostdev> + <hostdev mode='subsystem' type='scsi' managed='yes'> + <source protocol='iscsi' name='iqn.1992-01.com.example/1'> + <host name='example.org' port='3260'/> + </source> + <address type='drive' controller='0' bus='0' target='2' unit='5'/> + </hostdev> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c index a841adb..cee309d 100644 --- a/tests/qemuxml2argvtest.c +++ b/tests/qemuxml2argvtest.c @@ -1328,6 +1328,22 @@ mymain(void) QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_DEVICE_SCSI_GENERIC, QEMU_CAPS_DEVICE_SCSI_GENERIC_BOOTINDEX); + DO_TEST("hostdev-scsi-lsi-iscsi", QEMU_CAPS_DRIVE, + QEMU_CAPS_DEVICE, QEMU_CAPS_DRIVE, + QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI, + QEMU_CAPS_DEVICE_SCSI_GENERIC); + DO_TEST("hostdev-scsi-lsi-iscsi-auth", QEMU_CAPS_DRIVE, + QEMU_CAPS_DEVICE, QEMU_CAPS_DRIVE, + QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI, + QEMU_CAPS_DEVICE_SCSI_GENERIC); + DO_TEST("hostdev-scsi-virtio-iscsi", QEMU_CAPS_DRIVE, + QEMU_CAPS_DEVICE, QEMU_CAPS_DRIVE, + QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_VIRTIO_SCSI, + QEMU_CAPS_DEVICE_SCSI_GENERIC); + DO_TEST("hostdev-scsi-virtio-iscsi-auth", QEMU_CAPS_DRIVE, + QEMU_CAPS_DEVICE, QEMU_CAPS_DRIVE, + QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_VIRTIO_SCSI, + QEMU_CAPS_DEVICE_SCSI_GENERIC); DO_TEST("mlock-on", QEMU_CAPS_MLOCK); DO_TEST_FAILURE("mlock-on", NONE); diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c index 26e3cad..a6fca91 100644 --- a/tests/qemuxml2xmltest.c +++ b/tests/qemuxml2xmltest.c @@ -355,6 +355,11 @@ mymain(void) DO_TEST_DIFFERENT("hostdev-scsi-autogen-address"); + DO_TEST("hostdev-scsi-lsi-iscsi"); + DO_TEST("hostdev-scsi-lsi-iscsi-auth"); + DO_TEST("hostdev-scsi-virtio-iscsi"); + DO_TEST("hostdev-scsi-virtio-iscsi-auth"); + DO_TEST_DIFFERENT("s390-defaultconsole"); DO_TEST("pcihole64"); -- 1.9.3