5:02 a.m.
On Fri, May 12, 2017 at 11:27:36AM +0200, Martin Kletzander wrote:
On Thu, May 11, 2017 at 05:49:54PM +0200, Pavel Hrdina wrote:
>Currently we consider all UNIX paths with specific prefix as generated
>by libvirt, but that's a wrong assumption. Let's make the detection
<rant tldr="sigh">
That assumption is pretty OK from my POV, any name that's not generated
by libvirt under that path can collide with anything. Only libvirt paths
can be guaranteed not to collide. That's where generated paths go and
users or mgmt apps should query that information from the running XML.
That's also the only way we can guarantee access works.
But hey, why not make our codebase bigger and more complex, right...
Yes, I agree, but we should've documented it and possible check the path
provided by user and error out if it matches the prefix of our internal
paths and we shouldn't have put the path into config XML.
A lot of code in libvirt is there just to make sure that every bad
design or decision still works :).
</rant>
>better by actually checking whether the whole path matches one of the
>paths that we generate or generated in the past.
>
>Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1446980
>
>Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com>
>---
> src/qemu/qemu_domain.c | 78 +++++++++++++++++++---
> .../qemuxml2argv-channel-unix-gen-path1.xml | 17 +++++
> .../qemuxml2argv-channel-unix-gen-path2.xml | 17 +++++
> .../qemuxml2argv-channel-unix-gen-path3.xml | 17 +++++
> .../qemuxml2argv-channel-unix-user-path.xml | 17 +++++
> .../qemuxml2xmlout-channel-unix-gen-path1.xml | 32 +++++++++
> .../qemuxml2xmlout-channel-unix-gen-path2.xml | 32 +++++++++
> .../qemuxml2xmlout-channel-unix-gen-path3.xml | 32 +++++++++
> .../qemuxml2xmlout-channel-unix-user-path.xml | 33 +++++++++
> tests/qemuxml2xmltest.c | 5 ++
> 10 files changed, 271 insertions(+), 9 deletions(-)
> create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-channel-unix-gen-path1.xml
> create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-channel-unix-gen-path2.xml
> create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-channel-unix-gen-path3.xml
> create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-channel-unix-user-path.xml
> create mode 100644
tests/qemuxml2xmloutdata/qemuxml2xmlout-channel-unix-gen-path1.xml
> create mode 100644
tests/qemuxml2xmloutdata/qemuxml2xmlout-channel-unix-gen-path2.xml
> create mode 100644
tests/qemuxml2xmloutdata/qemuxml2xmlout-channel-unix-gen-path3.xml
> create mode 100644
tests/qemuxml2xmloutdata/qemuxml2xmlout-channel-unix-user-path.xml
>
>diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c
>index cc02c801e1..99bfd8f320 100644
>--- a/src/qemu/qemu_domain.c
>+++ b/src/qemu/qemu_domain.c
>@@ -3154,24 +3154,84 @@ qemuDomainDefaultNetModel(const virDomainDef *def,
>
>
> /*
>- * Clear auto generated unix socket path, i.e., the one which starts with our
>- * channel directory.
>+ * Clear auto generated unix socket paths:
>+ *
>+ * libvirt 1.2.18 and older:
>+ * {cfg->channelTargetDir}/{dom-name}.{target-name}
>+ *
>+ * libvirt 1.2.19 - 1.3.2:
>+ * {cfg->channelTargetDir}/domain-{dom-name}/{target-name}
>+ *
>+ * libvirt 1.3.3 and newer:
>+ * {cfg->channelTargetDir}/domain-{dom-id}-{short-dom-name}/{target-name}
>+ *
Looks like we could just clean the last one. People with previous
versions might rely on the generated paths already...
I don't think so. Currently we clear all of them because we match only
the prefix, this relaxes the logic only to the paths that we've actually
generated.
This code is also used to clear the path for migration so removing only
the latest format would break migration of guests that would use the old
format. You can have a running guest, you update libvirt and restart
the daemon and after that you try to migrate and it suddenly fails, that
would be a regression. It would also break incoming migration from
libvirt that doesn't clear the path before sending an XML.
We need to live with the fact, that the generated-path wasn't somehow
distinguished from path provided by user and because of that we need
to have an extra code to handle it.
We are clearing the path since 1.3.1. Might be worth putting it in
the
commit message.
>+ * The unix socket path was stored in config XML until libvirt 1.3.0.
>+ * If someone specifies the same path as we generate, they shouldn't do it.
>+ *
>+ * This function clears the path for migration as well, so we need to clear
>+ * the path event if we are not storing it in the XML.
> */
>-static void
>+static int
> qemuDomainChrDefDropDefaultPath(virDomainChrDefPtr chr,
> virQEMUDriverPtr driver)
> {
> virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
>+ char *path;
>+ char *prefix = NULL;
>+ int prefixLen;
>+ int ret = -1;
>+ int rv;
>
>- if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_CHANNEL &&
>- chr->targetType == VIR_DOMAIN_CHR_CHANNEL_TARGET_TYPE_VIRTIO &&
>- chr->source->type == VIR_DOMAIN_CHR_TYPE_UNIX &&
>- chr->source->data.nix.path &&
>- STRPREFIX(chr->source->data.nix.path, cfg->channelTargetDir)) {
>- VIR_FREE(chr->source->data.nix.path);
>+ if (chr->deviceType != VIR_DOMAIN_CHR_DEVICE_TYPE_CHANNEL ||
>+ chr->targetType != VIR_DOMAIN_CHR_CHANNEL_TARGET_TYPE_VIRTIO ||
>+ chr->source->type != VIR_DOMAIN_CHR_TYPE_UNIX ||
>+ !chr->source->data.nix.path) {
>+ ret = 0;
>+ goto cleanup;
> }
>
>+ if (!STRPREFIX(chr->source->data.nix.path, cfg->channelTargetDir)) {
>+ ret = 0;
>+ goto cleanup;
>+ }
>+
>+ path = chr->source->data.nix.path + strlen(cfg->channelTargetDir);
>+ prefixLen = strlen(path) - strlen(chr->target.name);
>+
>+ if (STRNEQ(path + prefixLen, chr->target.name)) {
If this can happen, that means it can eventually (in very rare
circumstances) segfault if the target name is very long.
I hope target names cannot have international characters in them,
otherwise it's even worse.
Nice catch, I'll fix it.
>+ ret = 0;
>+ goto cleanup;
>+ }
>+
>+ if (!VIR_STRNDUP(prefix, path, prefixLen))
>+ goto cleanup;
>+
>+ /* Now we've isolated the middle part of the path by removing the
>+ * cfg->channelTargetDir part from the beginning and chr->target.name
>+ * from the end. The middle part is the one that changed in the past
>+ * and the only part that we need to try to match with. */
>+
>+#define VIR_CLEAR_CHR_DEF_PATH(regex) \
>+ if ((rv = virStringMatch(prefix, regex)) < 0) \
>+ goto cleanup; \
>+ \
>+ if (rv == 0) { \
>+ VIR_FREE(chr->source->data.nix.path); \
>+ ret = 0; \
>+ goto cleanup; \
>+ }
>+
>+ VIR_CLEAR_CHR_DEF_PATH("^/[^/]+\\.$")
>+ VIR_CLEAR_CHR_DEF_PATH("^/domain-[^/]+/$")
>+ VIR_CLEAR_CHR_DEF_PATH("^/domain-[0-9]+-[^/]+/$")
>+
Just check for ^{cfg->channelTargetDir}/[^/]+[./]qemu/{chr->targetName}
And make sure you escape stuff in squiggly brackets. That should work
and be easier. Also don't forget adapting it to the boolean return
value of virStringMatch
That's exactly what I wanted to avoid, escaping the path where we can
simply use STRPREFIX and STRNEQ.
Pavel